Status for Purchase order or contract.
Hi,
Where can I see the Standard settings for Statuses of PO or PC in the SRM system ? Basically I want to know which are the statuses (Held, awating approval, ordered or released...so on) set by system for PO & PC & their sequence.
I am working on SRM5.0 - Standalone scenario - Strategic procurement. Would appreciate if anyone can let me know reg. this.
Regards,
Rajeshree
Hi
<u>Just for your information, System Status are stored in TJ20 and TJ20T tables.
Refer to these links.</u>
<b>http://help.sap.com/saphelp_srm50/helpdata/en/6d/0f343e47fd6b2ee10000000a114084/frameset.htm
http://help.sap.com/saphelp_srm50/helpdata/en/75/c65d3a0eb60365e10000000a11402f/frameset.htm
http://help.sap.com/saphelp_srm50/helpdata/en/42/f9a703c2673ee2e10000000a1553f6/frameset.htm
http://help.sap.com/saphelp_srm50/helpdata/en/5a/4cc5376848616ae10000009b38f889/frameset.htm
http://help.sap.com/saphelp_srm50/helpdata/en/cc/ffb3d23846461c993db7ce25ae28fb/frameset.htm
http://help.sap.com/saphelp_srm50/helpdata/en/99/4dded1f9e1433a88bd510e631ee335/frameset.htm
http://help.sap.com/saphelp_srm50/helpdata/en/c1/4e5c3c3906b106e10000000a11402f/frameset.htm
http://help.sap.com/saphelp_srm50/helpdata/en/46/40d93be53bcd29e10000000a114084/frameset.htm
http://help.sap.com/saphelp_srm50/helpdata/en/ff/4ad52e530ff249885fa3e882a4b61f/frameset.htm
http://help.sap.com/saphelp_srm50/helpdata/en/53/c49840893d2b54e10000000a1550b0/frameset.htm
http://help.sap.com/saphelp_srm50/helpdata/en/15/c9df3b6ac34b44e10000000a114084/frameset.htm</b>
Hope this will help.
Please reward full points, incase it suits your requirements.
Regards
- Atul
Similar Messages
-
Table which gives the billing status for purchase orders
Is there any table for purchase orders which gives us the "billing status" as we have table "VBUK" in sales order.
I don't think there is a status table per se, but try EKBE.
P.S. It's an SD forum, there is a separate MM/PTP forum. -
User Status Profile for Purchase order
hi
Can any one help me how to created user statuses other than system status for Purchase order? where to assign it to PO document type.
RajendraDear Rajendra,
I'm not sure there a standard field for user status in PO, you have to custom it, but it's not recommended.Perhaps u should check what if the critical use for this user status before u continue to custom.
regards -
Table for purchase order status
Hello friends,
There's a tab STATUS in purchase order (tcoe ME21N).
I can't find a table which contains theses statuses.
Anybody knows what's the table for purchase orders status ??
Regards,
BahiaHi
PO status is stored in Structure not in the table.
Please use the List displays to get the information like ME2N,ME2L, ME2M, ME2K etc
You can also get the information from the table EKKO, EKPO, EKET,EKBE
Hope it helps
thanks/karthik -
Complete Status of Purchase Order
HI SRM Gurus,
For SRM 7.0 system, for purchase Order what is the signifance of "Transaction Completed" status ?
I have completed one purchase Order which has open item.
At header level it sets "Transaction Completed" status in SRM PO. but neither it set delete indicator nor delivery complete indicator of open PO items . Hence i wonder what is the signifiance of complete functionality of PO in SRM.
Can you please through light on this topic ?
Regards,
KalandiChecks (SRM-SUS)
Before SAP SRM SUS documents are archived, they are processed by a check program to determine if they qualify for archiving. This validation procedure prevents documents that still require processing, erroneous documents, and current documents from being archived and subsequently deleted from the database.
The residence time is a general criterion used to determine when SUS documents are archived. Each document must remain in the system for a certain period of time (the retention period) after it was last changed before it can be archived.
For more information about setting retention periods, see the Supplier Relationship Management Implementation Guide (IMG): Supplier Relationship Management Supplier Self-Services Cross-Application Basic Settings Archiving of Documents Define Residence Times for Documents .
Note
Only SUS documents from completed business processes are considered for archiving. Before you can archive documents, you need to complete the business process to which they belong.
End of the note.
During the check process, the system also checks the relevant follow-on documents. If these documents have been created and completed, the relevant business transactions are assumed to have been completed. In particular, if a SUS purchase order can be archived, then so can the relevant follow-on documents.
*The status Transaction Completed is only applicable to SUS purchase orders and indicates that the document flow has been completed.* This means that all necessary documents in the document flow have been created and that, in the SUS EBP scenario, the confirmations and invoices pertaining to the purchase order have also been approved.
As well as the follow-on documents, the ordered quantity (or the quantity confirmed by the supplier if a purchase order response was requested) and the quantity specified in the follow-on documents must be considered. A purchase order can have one or more follow-on documents for each document type. If the total amount of item values of the follow-on documents does not match the total order value, the process step is not complete. In this case the system does not apply the status Transaction Completed to the original SUS purchase order.
An exception to this process is when a final delivery indicator has been set for an advanced shipping notification or for the invoice. Only the purchaser can set this indicator, which is used to show that no further delivery or invoice is expected and that this particular process step is completed. This information is only available on the purchaser's side in the purchasing system.
Example
A SUS purchase order has one or more advanced shipping notifications (ASN). If the total quantity specified in the ASNs does not match the quantity specified in the purchase order, it implies that some of the goods ordered have not yet been delivered. The delivery process step is therefore not yet completed even though invoices have been created for the existing ASNs.
http://help.sap.com/saphelp_srm70/helpdata/EN/d8/757af9204942aa86735dfefc62e9cd/frameset.htm -
Error:-document is in transfer for purchase order..creation is not possible
Hello,
While doing confirmation of PO I am getting this error, saying "document is in transfer for purchase order..creation is not possible".
can anyone please suggest me solution on this type of error?Hi,
Is the PO in ORDERED status? Is there any confirmation posted for this PO which might be stuck (idoc failed to reach back end)?
If it is a case of idoc failure, then reprocess the idoc and then do the next confirmation.
regards,
MRao -
Goods receipt for purchase order is not allowed
Hi,
When I am doing the PO receipt i am facing the error message "Goods receipt for purchase order is not allowed WBS element xxxxxx"
What could be the problem
Thanks
LuckyHi,
Please check the WBS element in CJ03, in Basic Data, System status,
Is the WBS is not released or blocked.
Hope it helps you.
Thanks -
Goods receipt for purchase order not allowed for a particular wbs
hello everybody..
Am creating a good receipt for a purchase order using the T-CODE-: MIGO...
While doing so am getting an error as " goods receipt for purchase order not allowed(wbs element)".
What can be done to rectify this error?
Plz do help me....
Regards,
Deepika
Moderator message: not directly related to ABAP development, please have a look in the appropriate functional forum, study the long text of this error message.
Edited by: Thomas Zloch on Dec 1, 2010 5:52 PMHi Br. Ajay M,
Released the order and Status line as follow
REL AVAC BUDG GMPS
but the error changed while reverse the document
item 0001 Order is invalid.
Many thanks for your kindly reply.
regards,
Steven -
IDoc Error "" No goods receipt possible for purchase order"
Hi All
I am getting IDoc failed with the error massaeg " No goods receipt possible for purchase order I510954-02 00010
Message type :MBGMCR
Basic type : MBGMCR03
Message no. M7036
Status : 51
Please suggest on this
Thanks
AjitHi
Please go through thid link i think it will help you..
No goods receipt possible in PO
Error - E 036 No goods receipt possible for purchase order
No goods receipt possible for purchase order
Regards
Sharada -
Problem in using output type for purchase order
Hi experts,
I am using output type for first time so may be i have done wrong configuration for po output type.The steps i have done are :-
1) Going to tcode NACE->Selected the row u201CEF Purchase Orderu201D and clicked on u201CProcedures".
2) In procedures there are 2 procedures for the application EF (Purchase Order). To proceed further, we would need to find out the procedure that is currently active.Gone to transaction SPRO. In this, navigate as Materials management -> Purchasing ->Messages -> Output control -> Message Determination Schemas ->Define Message Schema for Purchase Order
3) Clicking on u201CAssign Schema to Purchase Orderu201D. So, the procedure RMBEF1 is active for EF (Purchase Order) .
4) Go back to transaction NACE. Select u2018EFu2019 and click on u201COutput typesu201D.
5) Let us use the output type u201CNEU name purchase orderu201D for this purpose. Double-click on NEU.
6) Ensured that the checkboxes u201CAccess to conditionsu201D and u201Cmultiple issuingu201D are checked and the access sequence is 0001(DocType/PurchOrg/Vendor).Only 0001 and 0002 is available in f4 help for this.
7) Now clicked on u201CProcessing Routinesu201D on the left hand side. Ensured that there is an entry for Medium u2018Au2019 (Distribution ALE).
8) After that going back to the main screen of NACE. Select EF (Purchase Order) and clicked on u201CCondition Recordsu201D.
Select NEU and clicked on u201CCondition recordsu201D. The pop-up box appears that gives three radio button option :-
1) Purchasing output determination :purchasing org / vendor for EDI
2) Purchasing output determination :doc. type / purchasing org /vendor
3) Purchasing output determination :document type
but it is not having option only for purchasing organisation through which we can send idoc for changes or creation of PO in that particular pur.org now if i choose 2) i have to give doc type and purchasing org both bcoz they are mandatory fields and value for vendor.
9) Also i have done the necessary ALE configuration (not covered in this document). In the partner profiles, use the message type u201CORDERSu201D and the IDOC type u201CORDERS05u201D.In the tab u201CMessage Controlu201D, used the process codes u201CME10u201D and u201CME11u201D for u201CPO Createu201D and u201CPO Changeu201D respectively.
but the idoc is not generated many times when po is changed and when once it is generated it is giving error
Please suggest solution.
Thanks in advance
nehavtIn me22n in messages tab after looking into processing log it is giving->No recipient found for message type ORDCHG in the
ALE model ,next time giving error as no idoc items belonging to purchasing document found,when i changed message type to ORDCHG the status is green in messages tab it is giving-> error occured while idoc xyz is sent and in WE02 status is red 02
error passing data to port(could not find code page for receiving system) -
Status of Purchase Order should be "Fully Invoice" / "Partially Invoiced"
Hi SAP,
Purchase Order is made and goods receipt (MIGO) is done against the particular
line item of that Purchase Order, For some reasons the FI entry is entered in the system.
The Purchase Order Line Item is blocked in ME22N for avoiding booking of MIRO Transaction
The Requirement is to change the status of Purchase Order as “Fully Invoiced”
as the same is showing as "Not Invoice" in Purchase Order Header > Status Tab
Advance Thanks,
Bhaskar Reddy.SGo to ME22N..
Just tick the Final invoice in Invoice tab.. -
1.Where do i see the workflow for a purchase order.
2. There are 6 status in purchase order, can someone give me the link or document about the status?
Regards
Sudharshan1. Workflow for a PO can be seen from the navigation given below.
Purchasning > Purchase Orders > Purchase Order Summary > Inquire (M) > View Approval through workflow.
2. Use the Control Documents window to control requisitions and requisition lines as well as purchase orders, purchase order lines, releases, and shipments. For requisitions, the only available actions are Cancel and Finally Close. Only control options appropriate for the selected requisition or purchase order are displayed in the Actions field. The following control actions are available in this window:
Cancel - If you use on-line requisitions, and you cancel a purchase order you did not receive or pay at all, Purchasing cancels the requisition lines associated with the purchase order if the Cancel Requisitions check box is selected. If the Cancel Requisitions check box is not selected, the requisition lines are not cancelled and are returned to the pool of available requisitions. You can then assign these requisition lines to new purchase orders to fulfill your requestors' needs. See: Defining Control Options.
If you use on-line requisitions with quantity or amount based line types, and you cancel a partially received purchase order line, Purchasing recreates requisition lines for the remainder of the maximum of the billed or received quantity you have not received. You can assign these requisition lines to a new purchase order line to fulfill the requestor's needs. See: Autocreate Document Options. If you have implemented Oracle Services Procurement and use on-line requisitions with rate or fixed price line types, no requisition lines are recreated.
If you are using encumbrance or budgetary control, Purchasing automatically creates negative debit entries in your general ledger system to cancel the encumbrance that corresponds to the purchase order header, lines, or shipments you are cancelling, using the action date you specify in Action Date. Purchasing recreates requisition encumbrances for the requisition lines you used to create the purchase order if the Cancel Requisitions check box is not selected. Purchasing uses the distributions from your cancelled purchase order to recreate the encumbrance for your requisition. See: Budgetary Control and Online Funds Checking.
After you partially or completely cancel a purchase order, you need to inform your supplier of the cancellation. You can communicate purchase orders or releases you partially or completely cancelled. Purchasing automatically inserts a cancellation message on the purchase order, purchase order line, purchase order shipment, or release you cancelled.
You can source a requisition line from a line in the Prior Purchases region of the Supplier Item Catalog window. (A line in the Prior Purchases region corresponds to a purchase order line.) However, Purchasing does not automatically update the corresponding sourcing information if you cancel a blanket agreement or agreement line with which you source requisition lines. If you cancel a blanket agreement or agreement line, be sure to update the corresponding information in the Requisition Templates or the Sourcing Rules window. See: Defining Requisition Templates. See: Automatic Sourcing.
Close - You can close at the header, release, line, and shipment levels.
Close for Invoicing - You can close for invoicing at the header, release, line, and shipment levels. Note that if you close for invoicing a purchase order header that is currently open, Purchasing sets the status of all purchase order shipments to Closed for Invoicing, but the purchase order lines and header remain open. This status will not prevent you from matching an invoice to the purchase order or to the receipt.
Close for Receiving - You can close for receiving at the header, release, line, and shipment levels. Note that if you close for receiving a purchase order header that is currently open, Purchasing sets the status of all purchase order shipments to Closed for Receiving, but the purchase order lines and header remain open.
Finally Close - You can final close at the header, release, line, and shipment levels. Purchasing automatically closes fully billed and received purchase orders. However, to prevent further actions on the purchase order, you should use this window to final close purchase orders. Finally Close prevents modifications to the purchase order. Also, if you are using encumbrance or budgetary control, Finally Close automatically creates credit encumbrance journal entries in your general ledger system to reverse the encumbrance that corresponds to the purchase order header, lines, or shipments you are closing, using the action date you specify in Action Date. See: Budgetary Control and Online Funds Checking.
Freeze - You can freeze only at the header and release level. You freeze a purchase order when you want to prevent any future modifications to the purchase order. When you freeze a purchase order, you can still receive and pay for goods you already ordered. If you want to prevent future receipt or matching invoices against this purchase order, cancel or final close the purchase order instead.
On Hold - You can place a purchase order on hold only at the header level. This unapproves the purchase order while preventing printing, receiving, invoicing, and future approval until you remove the hold.
Open - You can open at the header, line, and shipment levels.
Open for Invoicing - You can reopen for invoicing at the header, line, and shipment level.
Open for Receiving - You can reopen for receiving at the header, line, and shipment level.
Release Hold - You can release a hold only at the header level.
Unfreeze - You can unfreeze only at the header and release levels. -
Document is in transfer for purchase order.Creation not possible
Dear All,
We did partial confirmation in EBP and later when trying to do confiramtion for the remaining quantiy getting the message"document is in transfer for purchase order.Creation not possible"
We are taking this problem in production as well as in quality systems also.
What are possible reason and how to solve it.
kindly share your views.
Thank you.Hi yshu,
use tcode bd87 in SRM to check for failed confirmation IDOC (type MBGMCR).
The double click the status record to see the exact cause of the failure.
Rectify the error. Then try to execute the IDOC from BD87 tcode.
For a few errors you may not be able to execute the IDOC but to create a new confirmation in SRM. In such cases, follow the below procedure..
There should be an entry for the confirmation in the transfer table BBP_DOCUMENT_TAB in SRM. Display the details.
Then run FM "BBP_DELETE_FROM_DOCUMENT_TAB" to delete the entry from the doc tab table.
Then post a new confirmation in SRM.
There is also a FM in SRM using which you can change the status of thefailed IDOC from 51 to 68 or 31.
Rgds,
MJ -
Activating conditions for Purchase Order workflows in EBP
Dear SRMer's,
I am facing the following problem:
System Info :SRM Server 5.5, ECC 6.0
Scenario 1:
All start conditions for Purchase Order in SAP Business Workflow are activated.
I created a direct procurement shopping cart (DP) in SRM browser and ordered it, then I logged in as proffessional purchaser, changed the Price and processed the DP PO.
When Ordering, the follow on Documents are created, but says the PO is waiting for approval. When I check for this PO in the Backend R/3 system in the Me22n (Display PO changes), I don't see the PO.
Scenario 2:
All Start conditions for Purchase Order in SAP Business Workflow are de-activated
I created another direct procurement shopping cart (DP2) in SRM browser and ordered it, then I logged in as proffessional purchaser, changed the Price and processed the DP2 PO (Status is held).
When Ordering, I get the Warning message, no workflow found, contact system administrator.
Please advice what needs to be configured for the PO to be ordered successfully.
Thanks in advance
RajHi,
In your scenario 1, if system is saying that there the PO has to be approved, it means that you have managed the user that will receive the workitem..
Activating all PO WF is not a solution as in standard there are two many cases activated (amount, role, limit...)
I propose you to first activate only the 0 step WF and to overwrite the code inside
Just code that every PO modification should trigger O step WF thus it will be more simple to test it.
Later on, if you want to implement more complex starting conditions, you just have to modify the WF content...
Kind regards,
Yann -
User Exit for Purchase Order Release Strategy
Hi,
I am a little new to this, how do I search for a user exit for purchase order release strategy (TCode ME29N).
Thanks in advance.
MickHi
Check the following Exits and BADI for Pur Requisition
Enhancement
MEVME001 WE default quantity calc. and over/ underdelivery tolerance
MM06E001 User exits for EDI inbound and outbound purchasing documents
MM06E003 Number range and document number
MM06E004 Control import data screens in purchase order
MM06E005 Customer fields in purchasing document
MM06E007 Change document for requisitions upon conversion into PO
MM06E008 Monitoring of contr. target value in case of release orders
MM06E009 Relevant texts for "Texts exist" indicator
MM06E010 Field selection for vendor address
MM06E011 Activate PReq Block
MMAL0001 ALE source list distribution: Outbound processing
MMAL0002 ALE source list distribution: Inbound processing
MMAL0003 ALE purcasing info record distribution: Outbound processing
MMAL0004 ALE purchasing info record distribution: Inbound processing
MMDA0001 Default delivery addresses
MMFAB001 User exit for generation of release order
MRFLB001 Control Items for Contract Release Order
AMPL0001 User subscreen for additional data on AMPL
LMEDR001 Enhancements to print program
LMELA002 Adopt batch no. from shipping notification when posting a GR
LMELA010 Inbound shipping notification: Transfer item data from IDOC
LMEQR001 User exit for source determination
LMEXF001 Conditions in Purchasing Documents Without Invoice Receipt
LWSUS001 Customer-Specific Source Determination in Retail
M06B0001 Role determination for purchase requisition release
M06B0002 Changes to comm. structure for purchase requisition release
M06B0003 Number range and document number
MEQUERY1 Enhancement to Document Overview ME21N/ME51N
MELAB001 Gen. forecast delivery schedules: Transfer schedule implem.
MEFLD004 Determine earliest delivery date f. check w. GR (only PO)
MEETA001 Define schedule line type (backlog, immed. req., preview)
ME590001 Grouping of requsitions for PO split in ME59
M06E0005 Role determination for release of purchasing documents
M06E0004 Changes to communication structure for release purch. doc.
M06B0005 Changes to comm. structure for overall release of requisn.
M06B0004 Number range and document number
Business Add-in
ME_PROCESS_REQ_CUST Enhancements for Processing Enjoy PReqs: Customer
ME_PROCESS_REQ Enhancements for Processing Enjoy PReqs: Internal
ME_PROCESS_PO_CUST Enhancements for Processing Enjoy Purchase Order: Customer
ME_PROCESS_PO Enhancements for Processing Enjoy Purchase Order: Intern.
ME_PROCESS_COMP Processing of Component Default Data at Time of GR: Custome
ME_PO_SC_SRV BAdI: Service Tab Page for Subcontracting
ME_PO_PRICING_CUST Enhancements to Price Determination: Customer
ME_PO_PRICING Enhancements to Price Determination: Internal
ME_INFOREC_SEND Capture/Send Purchase Info Record Changes - Internal Use
ME_HOLD_PO Hold Enjoy Purchase Orders: Activation/Deactivation
ME_GUI_PO_CUST Customer's Own Screens in Enjoy Purchase Order
ME_FIELDSTATUS_STOCK FM Account Assignment Behavior for Stock PR/PO
ME_DP_CLEARING Clearing (Offsetting) of Down Payments and Payment Requests
ME_PURCHDOC_POSTED Purchasing Document Posted
SMOD_MRFLB001 Control Items for Contract Release Order
EXTENSION_US_TAXES Extended Tax Calculation with Additional Data
ARC_MM_EKKO_WRITE BAdI: Enhancement of Scope of Archiving (MM_EKKO)
ARC_MM_EKKO_CHECK BAdI: Enhancement of Archivability Check (MM_EKKO)
MM_EDI_DESADV_IN Supplementation of Delivery Interface from Purchase Order
MM_DELIVERY_ADDR_SAP Determination of Delivery Address
ME_WRF_STD_DNG PO Controlling Reminder: Extension to Standard Reminder
ME_TRIGGER_ATP Triggers New ATP for Changes in EKKO, EKPO, EKPV
ME_TRF_RULE_CUST_OFF BADI for Deactivation of Field T161V-REVFE
ME_TAX_FROM_ADDRESS Tax jurisdiction code taken from address
ME_REQ_POSTED Purchase Requisition Posted
ME_REQ_OI_EXT Commitment Update in the Case of External Requisitions
ME_RELEASE_CREATE BAdI: Release Creation for Sched.Agrmts with Release Docu.
ME_DEFINE_CALCTYPE Control of Pricing Type: Additional Fields
ME_CHANGE_OUTTAB Enrich ALV Output Table in Purchasing
ME_CHANGE_CHARACTER Customer-Specific Characteristics for Product Allocation
ME_CCP_DEL_DURATION Calc. of Delivery Duration in CCP Process (Not in Standard)
ME_CCP_BESWK_AUTH_CH BAdI for authorization checks for procuring plant
ME_CCP_ACTIVE_CHECK BAdI to check whether CCP process is active
ME_BSART_DET Change document type for automatically generated POs
ME_BAPI_PR_CREATE_02
ME_BAPI_PR_CREATE_01
ME_BAPI_PO_CREATE_02
ME_BAPI_PO_CREATE_01
ME_BADI_DISPLAY_DOC BAdI for Internal Control of Transaction to be Invoked
ME_ACTV_CANCEL_PO BAdI for Activating the Cancel Function at Header Level
MEGUI_LAYOUT BAdI for Enjoy Purchasing GUI
ME_CHECK_ALL_ITEMS Run Through Items Again in the Event of Changes in EKKO
ME_COMMTMNT_REQ_RE_C Check of Commitment Relevance of Purchase Requisitions
ME_COMMTMNT_REQ_RELE Check of Commitment Relevance of Purchase Requisitions
ME_COMMTMNT_PO_REL_C Check for Commitment-Relevance of Purchase Orders
ME_COMMTMNT_PO_RELEV Check for Commitment-Relevance of Purchase Orders
ME_COMMITMENT_STO_CH BadI for checking if commitments for STOs are active
ME_COMMITMENT_RETURN Commitment for return item
ME_CIP_REF_CHAR Enables Reference Characteristics in Purchasing
ME_CIP_ALLOW_CHANGE Configuration in Purchasing: Changeability Control
ME_CIN_MM06EFKO Copy PO data for use by Country version India
ME_CIN_LEINRF2V BADI for LEINRF03 excise_invoice_details
ME_CIN_LEINRF2R BADI for CIN India - Delivery charges
ME_CHECK_SOURCES Additional Checks in Source Determination/Checking
ME_CHECK_OA Check BAdI for Contracts
Reward points if useful
Rgds,
Naren
Maybe you are looking for
-
text inflation as a desktop-to-mobile-view conversion doesn't work, and can never be fixed. it will always either fail to make important parts of websites readable, or completely unhinge them. opera mini, opera mobile(now classic) and opera for andro
-
Power Query; How do I reference a Power Pivot table from a Power Query query
Hi, It's pretty awesome how you can define Extract Transform and Load processes within Power Query without having to type in a single line of code. However how do I reference a Power Pivot table from a Power Query query to avoid me repeatedly accessi
-
23" Display did not come on after disconnecting
Recently powered down Mac Pro (2007) and relocated to another room along with 23" Cinema display. Powered on and display did not come back on. Checked connection to computer. Only other connection to display is USB from Apple keyboard. Any suggestion
-
Quicklook broken on PDF files?
I am not able to get Quick Look to function correctly with PDF files. When I press spacebar the first time on a PDF, nothing displays and all of the thumbnails show the spinning gear. If I do nothing, nothing happens. If I press spacebar again (hidin
-
How do you download itunes library on to a usb flash drive
I want to download my ituneslibrary on to a sandisc ultra 16GB usb flash drive to play in my truck I never used a usb flash drive before!