Status 'in process' and 'complete' in workload Redistribution

hi expert.
   In the workload redistribution, we found there are two status : "in porcess"  and 'complete''.  i do not  know what's mean about them. and affect what ?
  thanks in advance.
regards
    claud

Hi Deepthi,
You can look for the "job log" status for the jobs in your process chain. For job logs use sm37 transaction an find the relative db table.
Hope this helps.
Bye
Dinesh

Similar Messages

  • EXIT after changing the document status to Parked and complete

    Hi,
    I have an urgent requirement to findout a exit which will trigger after changing the document status to PARKED and COMPLETE. I need this for invoice and FI document.
    I will really appreciate your help.
    Kuntal

    Yes the Workflow Background process completed successfully with no errors. I see the error when I query up the Sales Order go to menu --> Workflow Status -->
    Activity History.
    The Activity History shows error in the Wait Function and the error message is 3001: Invalid command argument.?
    This error message does not explain much. I followed all the steps in document# 397364.1
    Don't know why it should end in error and how it can be fixed?
    Any more ideas?
    Thanks

  • Sales Order Status "Being Processed"  after completion for Free Goods Sales

    Hello All,
    This problem is related to Free Goods Sales which is as follows.
    The process-flow for free goods sales is first we raise a sales order, then we do outbound delivery for the sales order and then finally PGI of the goods.We don't raise any invoice and the Free Goods Challan is issued to the customers by running a report.
    The document flow at the end always show the Sales Order  status as " Being Processed" and Outbound Delivery & PGI as "Completed".I want the system to show the Sales Order status as " Completed" and not " Being Processed".How to do that?
    Please suggest some solutions.
    Thanks & Regards
    Priyanka Mitra

    Hi Raja,
    Thanks a lot for your prompt reply and suggestion.
    Now we are able to get the Completed status in Document Flow.
    Thanks & Regards
    Priyanka Mitra
    P.S. -  I would request you to go through another problem which we are facing in Shipment , please go through this and suggest some solution regarding it if possible.
    I have already posted this problem in a separate thread few days back but am yet to receive any fruitful suggestion.
    The problem is regarding Shipment Cost Calculation while doing STO which is as follows -
    In our scenario the Shipment cost calculation is done on two basis -
    1) Absolute Rate / Flat Rate Wise - For example for transporting of goods from Kolkata Depot to Delhi Depot is Rs. 20,000 fixed.
    2)) Gross Weight Wise - where the weight unit is kg and rate for example is Rs. 4 / Kg. So for 10 Kg the shipment cost will be Rs. 40.
    Now I want the system to calculate the shipment cost on Rate / Carton Wise i.e. How will I be able to calculate the shipment cost of 100 cartons if the rate is Rs. 100/ Carton.
    How to configure this ? Please help in this regard.

  • SWEQADM - Event hanging in status IN PROCESS

    We have activated the event queue (SWEQADM) for all our workflows. Now I have discovered that we do have a lot of events which are stuck in status IN PROCESS. When we go to the event queue browser and try to deliver the event we get the following message:
    'The event cannot be delivered in status "In Process" '
    Do any of you have experience of this? Any ideas on why they are stuck in status IN PROCESS, and how we should be able to process them.

    Hello Kicki,
    The most likely cause for events to remain in process as you describe is that something goes wrong during the receiver processing.  This could either be an error causing a short dump (ST22) or else a basis-related problem, look at SM58 for stuck RFCs or SM13 for update problems.
    More clues might be in the events themselves: is it just one event or a particular set of events or do they appear to be random? If the latter is the case, it would point to more towards a basis related problem.
    Also, you mentioned that you switched it on for ALL workflows. Any particular reason?  As you have already noticed the event queue adds an extra layer into the process which equates to an extra point of failure. Unless you are using it to direct workflows to specific servers, you are probably better off only sending high volume events to the queue.
    Hope that helps.
    Cheers,
    Mike

  • When I plug in my iPhone to sync, it starts but does not complete the process and several pieces of data are not being transferred to my iPhone from my MacBook Air.

    Problem:
    When I plug in my iPhone to sync, it starts but does not complete the process and several pieces of data are not being transferred to my iPhone from my MacBook Air.
    Any help that you can provide in helping my iPhone accurately sync with iPhoto and iTunes will be greatly appreciated.
    Symptoms:
    1)   Sync:  It’s not completing the sync.  Below, I’ve provided all of my settings from the iTunes Summary tab so that you might tell me if I’ve selected any incorrect options.  I prefer to sync the “old school” way – by connecting to the computer – as opposed to syncing over the cloud. Perhaps this is what’s causing the problem? Here is a list of the steps displayed in the iTunes window as the sync progresses:
    waiting for sync to start (step 1 of 7)
    backing up (step 2 of 7)
    preparing to sync (step 3 of 7)
    determining apps to sync (step 4 of 7)
    preparing apps to sync (step 5 of 7)
    importing photos (step 6 of 7)
    waiting for changes to be applied (step 7 of 7)
    syncing apps / copying 1 of 4 (App name) (step 7 of 7)
    canceling sync
    apple icon
    2)   Photos: I've selected only certain of my iPhoto albums to sync to my iPhone.  All of the albums are correct/complete in iPhoto.  All of the albums are listed on my iPhone, both before and after the sync, but the albums are empty (no actual photos) before and after the sync. Perhaps this is tied to the fact that the sync isn’t completing, but because “importing photos” is one of the steps that the incomplete sync displays, I don’t know.
    3)   Apps: When I launch iTunes and click on the Apps folder under the Library listing, then click on the Updates tab, iTunes searches for any Apps needing to be updated and provides a list.  If I click on Update All, the Apps are successfully updated in iTunes.  But, when I plug in my iPhone so that the updates will transfer to the apps on my iPhone, the updates don’t transfer to the apps on my iPhone and those apps still reflect that they need updating on the iPhone.
    Other Potential Pertinent Info:
    The flash memory hard drive on my MacBook Air recently died (perhaps a month or two ago).  Apple had emailed me about a known issue and literally the next day, my MacBook Air crashed.  I installed a new flash memory drive and re-installed everything from a backup off of an external hard drive.  Everything seems to be working fine; it recreated accurately all of my software and data, including iPhoto and iTunes, the pictures and songs (respectively) for which are stored on that hard drive, as opposed to being on the flash memory in the MacBook Air itself.  However, I don’t recall if the start of the sync problem described herein started happening at the same time that I replaced the flash memory drive.  All I know is that the computer is working perfectly in all respects and that even as the sync is failing, it at least says that it’s doing the right things and looking in the right places (e.g., the list of albums on my iPhone matches the list of albums in iTunes, etc.).
    Settings/Status:
    MacBook Air
    OSX v. 10.9
    iPhoto ’11 v. 9.5 (902.7)
    iPhone iOS 7.0.4
    iTunes v. 11.1.3 (8)
    Summary Tab
    Backups (This Computer)
    Options
    Automatically sync when this iPhone is connected
    Sync only checked songs and videos
    Photos Tab
    Sync Photos from iPhoto (429 Photos)
    Selected albums, Events, and Faces, and automatically include (no Events)
    Albums – 9 are selected

    You need to download iTunes on your computer. iOS 6 requires the latest version of iTunes which is 10.7.

  • Dism - The directory could not be completely unmounted - process explorer can't find open processes and unmounting fails

    Hi all,
    Installed WAIK on server 2008 R2 64 bit. I'm setting up some boot images, and am having a real hard time getting drivers to integrate into the driver store in the boot images.
    What I'm finding is that when adding drivers to the boot image the gui hangs part way through over 50% of the time using Dell 760 or HP NX9420 drivers extracted to pull out the inf files. It's really flakey and will work after a couple of attempts and when the wind is right.
    The main problem is that when the process fails the image is left open, so using dism to list mounted images and then umount the open images is the only way to try again.
    However, some images won't unmount and the unmount process displays the following:
    C:\Windows\system32>dism /get-mountedwiminfo
    Deployment Image Servicing and Management tool
    Version: 6.1.7600.16385
    Mounted images:
    Mount Dir : C:\Users\davros\AppData\Local\Temp\~$WDSMGMT.000
    Image File : \\DAVROS.stafflib.flinders.edu.au\REMINST\Boot\x86\Images\boot-(2).
    wim
    Image Index : 2
    Mounted Read/Write : Yes
    Status : Invalid
    The operation completed successfully.
    C:\Windows\system32>dism /unmount-wim /mountdir:C:\Users\davros\AppData\Local\Te
    mp\~$WDSMGMT.000 /discard
    Deployment Image Servicing and Management tool
    Version: 6.1.7600.16385
    Image File : \\DAVROS.stafflib.flinders.edu.au\REMINST\Boot\x86\Images\boot-(2).
    wim
    Image Index : 2
    Unmounting image
    [==========================100.0%==========================]
    Error: 0xc1420117
    The directory could not be completely unmounted.  This is usually due to applica
    tions that still have files opened within the mount directory.  Close these file
    s and unmount again to complete the unmount process.
    The DISM log file can be found at C:\Windows\Logs\DISM\dism.log
    Using process explorer shows no running processes that have the files open and the dism.log file shows:
    2009-12-16 11:49:35, Error                 DISM   DISM WIM Provider: PID=5580 d:\w7rtm\base\ntsetup\opktools\dism\providers\wimprovider\dll\wimimage.cpp:75 - CWimImage::Unmount(hr:0xc1420117)
    2009-12-16 11:49:35, Error                 DISM   DISM WIM Provider: PID=5580 d:\w7rtm\base\ntsetup\opktools\dism\providers\wimprovider\dll\wimmanager.cpp:1068 - CWimManager::InternalOpUnmount(hr:0xc1420117)
    2009-12-16 11:49:35, Error                 DISM   DISM WIM Provider: PID=5580 d:\w7rtm\base\ntsetup\opktools\dism\providers\wimprovider\dll\wimmanager.cpp:2318 - CWimManager::InternalCmdUnmount(hr:0xc1420117)
    2009-12-16 11:49:35, Error                 DISM   DISM WIM Provider: PID=5580 Error executing command - CWimManager::InternalExecuteCmd(hr:0xc1420117)
    2009-12-16 11:49:35, Error                 DISM   DISM WIM Provider: PID=5580 d:\w7rtm\base\ntsetup\opktools\dism\providers\wimprovider\dll\wimmanager.cpp:516 - CWimManager::ExecuteCmdLine(hr:0xc1420117)
    2009-12-16 11:49:35, Info                  DISM   DISM.EXE: Image session has been closed. Reboot required=no.
    2009-12-16 11:49:35, Info                  DISM   DISM.EXE:
    2009-12-16 11:49:35, Info                  DISM   DISM.EXE: <----- Ending Dism.exe session ----->
    2009-12-16 11:49:35, Info                  DISM   DISM.EXE:
    2009-12-16 11:49:35, Info                  DISM   DISM Image Session: PID=5580 Disconnecting the provider store - CDISMImageSession::Final_OnDisconnect
    2009-12-16 11:49:35, Info                  DISM   DISM Provider Store: PID=5580 Disconnecting Provider: WimManager - CDISMProviderStore::Internal_DisconnectProvider
    2009-12-16 11:49:35, Info                  DISM   DISM Provider Store: PID=5580 Disconnecting Provider: FolderManager - CDISMProviderStore::Internal_DisconnectProvider
    2009-12-16 11:49:35, Info                  DISM   DISM Provider Store: PID=5580 Found the OSServices.  Waiting to finalize it until all other providers are unloaded. - CDISMProviderStore::Final_OnDisconnect
    2009-12-16 11:49:35, Info                  DISM   DISM Provider Store: PID=5580 Disconnecting Provider: Compatibility Manager - CDISMProviderStore::Internal_DisconnectProvider
    2009-12-16 11:49:35, Info                  DISM   DISM Provider Store: PID=5580 Releasing the local reference to DISMLogger.  Stop logging. - CDISMProviderStore::Internal_DisconnectProvider
    Rebooting the server clears the lock, but it's really becoming a joke, as I can create a boot image with the drivers, but then going back into add another driver causes the gui to not respond.
    Any suggestions gratefully accepted. - Matt.

    Hi all,
    had same problem unmounting the wim file using Windows 7 Pro 32bit.
    My solution was: Checking for "wrong" Dism.exe
    Preparing a WinPE I followed the steps in the help of AIK. I ran the
    copype.cmd batch. When it was finished, it said that it added something
    to the path environment variable. It was clear that it did so in order
    to find the tools needed for the further steps. As long as everything
    worked, I didn't give it a second thought. Then I could not unmount the
    WIM.
    I looked at the PATH variable: NO entry pointed to the directory where
    dism.exe was in. (In my case that would have been
         c:\program files\windows aik\tools\x86\servicing
    Magically, dism.exe started from everywhere though.
    Doing a      dir c:\dism.exe /s /a     showed I had a Dism.exe in
    c:\windows\system32, as well. This one has a file size different from
    the correct one. Obviously I had started this one (because PATH points
    there).
    Starting the correct dism.exe let me unmount the WIM without problems.
    Regards,
    Robert

  • Status used in open and completed transactions in Fact Sheet

    Hi! I would like to confirm the logics used in the fact sheet to display open and completed transactions. I read on the help that for open (for example) transactions, system is using status 'open' and 'in process'. This seems to me like system status. However, when I ran the fact sheet, the control is more at the user status level. So, I need clarification on this. Also, where can I find the status and transaction logics used for the extraction of these transactions (e.g. what transaction types are used)? I could not find the codings in the method GET_REPORT under class CL_CRM_CCKPT_PROCESS_CLOSED for example. Perhaps I have looked in the wrong place?
    Appreciate any help on the above.
    Cheers!
    SF

    No response. Based on what is being debugged, all transactions are taken into account.

  • Change Status of delivery from being processed to completed

    Hi gurus,
    We have a sales order with delivery related billing and inter company billing associated in order type. 
    this order is a very old one and by mistake no one has raised a intercompany billing for this order and outbound delivery status is being processed. now when we are doing archiving system is not letting us to archive the order as delivery status is being processed.
    Now the business does not want to raise an intercompany billing for this and expecting to manually force the document status to completed.  so gurus, please throw some light on this as how to manually force the status of being processed to completed of an outbound delivery. i heard there is an option of forcely maintaining inside a table. can some one advise us thanks in advance.
    Regards,
    Gopio.

    Hi Gopio
    My suggestion is goto VBUK table change the status of the delivery to Completed status (field KOSTK - "overall pick status")
    hope this is helpful
    Regards
    Manish Kumar

  • Status 51 qty and/or delivery completed ind or final issue ind are missing

    i am using we19 to test an inbound idoc mbgmcr02
    i get status 51 qty and/or delivery completed ind or final issue ind are missing
    i have the quantity filled in.
    so i must need the delivery completed ind or final issue ind filled in.
    i cannot find either or these???can anyone point me to them???
    also on the e1BP2017_gm_code i am using 02.
    can anyone give me a rundown on the valid codes to use here and what they mean

    Hi Janice,
    i saw your posting and we are also having the same issue and when i trie to open the link, it's not opening ' page not found'.
    we are having an issue while moving the stock to vendor maintained stock.
    The scenario is:
    We have an externally processed operation in prod. ord and 2 of the components in the prod.ord are batch managed.( These components can have multiple batches) so when we released the prod.ord, P.Req and PO are getting created automatically. here we have two scenarios:
    1. When we are maintaining single batch for the 2 components and release the prod.ord, every thing works fine i.e. stock is moving to vendor maintained stock i.e 541(o).
    2. The problem is when we are maintaining multiple batches for the same components, the P.req and PO are getting created but stock is not moving to vendor maintained stock i.e 541(o)
    when we debugged it's giving this message: " Qty and / or "delivery completed" ind. or final issue ind. are missing ".
    Do i need to make any settings or am i making any mistake?
    Plz guide me and it will be really helpful if anybody can give some steps to follow.
    Thank you ,
    kanth

  • Status : Being Processed in Sales Order after the Delivery and Billing also

    Hi All,
    For one Sales Order........ Delivery and Billing are over but it shows
    In the Sales Order> Header level>Status bar>Overall Status>Being Processed.
    In Document Flow:
    Sales Order xxxxxxxxx  : Being Processed.
    Delivery xxxxxxxxxxxx   : Completed.
    Billing xxxxxxxxxxxxx    : Completed.
    Functionally we checked everything......but through technically we can solve the issue or not
    Pls help me with some solutions.
    Advanced Thanks.
    Diwakar Reddy.
    [email protected]

    Hi,
    This generally happens if the sales order is for a quantity greater than the quantity delivered.
    SAP treats the sales order as still open and delivery of the remaining quantity is possible through that sales order itself. So the status is shown as "Being Processed".
    If you want to see the status as "Completed" then you need to cancell the remaining open items in that sales order. Automatically the status will change to "COMPLETE"
    Hope this solves your querry.
    Regards,
    Anirban

  • Replacement Needed. This iphone is not able to complete the activation process and needs to be replaced. Please visit your nearest apple store or authorized service center.

    Probably will never ever think of buying a locked phone from AT&T cause its one of the worst system integrations ever that these companies could think of.
    The entire problem started when I put in a request with at&t to unlock my iphone 4s (ios7) which did get approved. I performed the entire instructions they asked me to do, which is to backup and restore. After doing those instructions my iphone gave me an error message below
    The SIM card inserted in this iPhone does not appear to be supported.
    The SIM card that you currently installed in this iPhone is from a carrier that is not supported under the activation policy that is currently assigned by the activation server. This is not a hardware issue with the iPhone. Please insert another SIM card from a supported carrier or request that this iPhone be unlocked by your carrier. Please contact Apple for more information.
    Basically saying that at&t hasn't still unlocked the iphone which a really helpful apple executive was able to confirm. I initiated another unlock process from at&t in order to unlock the iphone, just to be sure that its not something wrong from my end. The nice at&t lady stayed on chat with me to unlock the iphone step my step while I was calling the apple tech too. And the apple tech confirmed again that the iphone is locked to at&t.
    Now, just a few minutes ago I tried another restore to see if any progress is being made and to my surprise I got an error message saying
    Replacement Needed. This iphone is not able to complete the activation process and needs to be replaced. Please visit your nearest apple store or authorized service center.
    I feel like I am just going around these two different "money hogger" companies which set certain rules and regulations to screw a regular phone buyer. I purchased this iphone in USA and trying to unlock in India, is it really this hard to simply unlock a device.
    For now I am going to try to call a apple office in india (apprently we don't have very many out here) and see if they can help me. But any other assistance regarding unlocking an iphone 4s would be helpful. I have however, tried checking IMEI.info, called up apple, talked to at&t (which always say go talk to apple) I do have a case number from apple as well in case an apple executive reads this discussion forum (case number: 566383594)
    Thanks

    You got a confirmation from AT&amp;T that it was authorized. Is this correct? - Yes i did get an email authorization on the 21st.
    Then you connected the phone to a computer with the latest version of iTunes installed. You clicked on the phone's name in iTunes, then clicked "Backup Now". - Yes
    When that finished you clicked "Restore iPhone" (NOT "Restore Backup") - Yes
    Are you with me so far? - Yes.
    And @ Varjak is right that after the 3rd restore I get the replacement error. 
    Plus I have NEVER jailbroken the iPhone. To give you another update, I spoke to a really nice apple tech in India who was atleast able to get me out of the replacement error by doing a recovery mode option. However, the lastest restore still gives me the same error
    The SIM card inserted in this iPhone does not appear to be supported.
    The SIM card that you currently installed in this iPhone is from a carrier that is not supported under the activation policy that is currently assigned by the activation server. This is not a hardware issue with the iPhone. Please insert another SIM card from a supported carrier or request that this iPhone be unlocked by your carrier. Please contact Apple for more information.
    Message was edited by: jabgars

  • TS3694 my phone has switched off for the second time this week, however when connecting to itunes the restore process wont complete. the error is 2006 however i have tried a number of USB cords, and none seem to be working.

    my phone has switched off for the second time this week, however when connecting to itunes the restore process wont complete. the error is 2006 however i have tried a number of USB cords, and none seem to be working.
    I am in the noerthern [parts of australia and accessing an apple store is not possiable for another month. this is my only soucrce or telecommunication. please help

    This is what it says about error 2006
    Error 2000-2009 (2001, 2002, 2005, 2006, 2009, and so on)
    If you experience this issue on a Mac, disconnect third-party devices, hubs, spare cables, displays, reset the SMC, and then try to restore. If you are using a Windows computer, remove all USB devices and spare cables other than your keyboard, mouse, and the device, restart the computer, and try to restore. If that does not resolve the issue, try the USB issue-resolution steps and articles listed for Error 1604 above. If the issue persists, it may be related to conflicting security software. If the errors persist on another computer and known-good USB cable, the device may need service.

  • HT1386 i have albums that will not sync now. I have only owned my ipod for 5 mo and it appeared to sync fine. Now it say that the process is complete but there are 3 items that will not sync to my ipod. I i just purchased from the store!!

    i have albums that will not sync now. I have only owned my ipod for 5 mo and it appeared to sync fine. Now it say that the process is complete but there are 3 items that will not sync to my ipod. I i just purchased from the store!! please help! thanks maggibnd

    Do they play in iTunes?
    Can you directly redownload them by:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store

  • HT1766 I haveabout 7 App's that I Need to update. However, when trying tot do so,the message I get is 'Can't download the app' (in Dutch). The app, however, such as Pages, is no longer available. What can I do to complete the updating process and start us

    I haveabout 7 App's that I Need to update.
    However, when trying tot do so,the message I get is 'Can't download the app' (in Dutch).
    The App, however, such as Pages, is no longer opening and can't be used.
    What can I do to complete the updating process and start using the Apps again?

    Download iTunes using the tab at the top of this page. Then run the update with iTunes closed.

  • I live in Bidar,Karnataka,India.I recently updated my firmware.i dont have an official sim card to regain access and complete the process,can u please suggest me where can i buy an official sim card,please?

    i live in Bidar,Karnataka,India.I recently updated my firmware.i dont have an official sim card to regain access and complete the process,can u please suggest me where can i buy an official sim card,please?

    From the carrier for your cell phone service.
    Allan

Maybe you are looking for