Status lights in DVD Pro

Just recently I have started having an issue in DVD pro. I complete a sequence in FCP save it export it as a Quicktime movie then open DVD pro import assets, and the two status lights next to the audio vieo files are yellow instead of green. I have been doing it this way for some time, and it has always worked fine, and the two little lights were always green until just recently. Can somebody tell me what might be causing this.
Thank You,
Bob Bowers.

Seeing how yours is a DVD-SP question, you might get more and better responses by posting in the DVD-SP forum: http://discussions.apple.com/forum.jspa?forumID=952
-DH

Similar Messages

  • Mac Pro 3.1 status light is always on

    Hello
    I have a Mac Pro 3.1
    Since last week I have a problem, and could't yet found the solution. Sometimes (most of the times, actually) the Mac Pro doesn't boot and just stops after the chime (just as it was powered off). But what I found strange is that the white status light is always on (not blinking, always on) from the moment I connect the power strip.
    I've run multiple times the Apple Service Diagnostic tests (running then again at this moment) and there´s absolutely no error reported.
    I've changed memory, video card slot position, everything I could think off, but still haven't found a solution.
    Thank you for your help

    I will try the UPS as soon as I can get one working (it seems my trusted Ellipse Max 1500 isn't working anymore). But how can it explain the fact that the light always stays on?
    Another thing. In one of the last reboots to seemed that the Mac Pro couldn't find the startup disk. Past the chine nothing happened. After I started again with the alt key pressed and chooses the correct disk it appears to be working (the light problem keeps the same).
    So, maybe there's a problem with the SMC, could it be? Yes, I did the SMS (and PRAM) reset, but the problem keeps the same

  • Macbook Pro network status lights?

    I am tring to find out if there are any network activity indicator lights where the network jack is? I see what looks like LED's and at the abpplestore they even looked like they were flashing...They are not even on with my Macbook so I was not sure if there is a way to activate or they are really not there?
    Thanks

    The MBP does not have network status lights. There is a utility available called MenuMeters that will put the information on the bar at the top of the screen.

  • Flashing Status Light

    Hi,
    I switched on my Mac Pro today (after using it yesterday) and it won't start; no starting chime or anything.  All I have is the status light above the ON switch is flashing continuously; there is no pattern to the flashing as suggested in the user guide - it just flashes constantly.
    I have disconnected all external devices and re-seated the memory cards and PCI Card for my eSATA drive but the Mac will not start and the light continues to flash.
    I'd be grateful for any ideas or suggestions.
    Thanks,
    Cliff
    Brighton, UK

    Specifically which mac pro model do you have?
    There are other diagnostic leds on the processor board besides those near the dimms.  Look carefully around for others that may be lit.

  • HT4907 i am trying to set up an airdisk that is connected to my parents airport extreme, though next to my iCloud account details i get a yellow status light and can't get a hold on the airdisk being connected to an other internet connection..what should

    i am trying to set up an airdisk that is connected to my parents airport extreme,
    though next to my iCloud account details i get a yellow status light and can't get a hold on to the airdisk when i'm being connected to a different internet connection..what should i do?
    sharing is enabled and i entered the right account details.
    the disk shows up connected to my parents network, but i want to access it from my place as well

    Encryption wouldn't matter except for Wifi.
    While 10.2 might help, there's not much you can do on the Internet these days with less than 10.4.11
    Tiger Requirements...
    To use Mac OS X 10.4 Tiger, your Macintosh needs:
        * A PowerPC G3, G4, or G5 processor
        * Built-in FireWire
        * At least 256 MB of RAM (I recommend 1GB minimum)
        * DVD drive (DVD-ROM), Combo (CD-RW/DVD-ROM) or SuperDrive (DVD-R) for installation
        * At least 3 GB of free disk space; 4 GB if you install the XCode 2 Developer Tools  (I recommend 20GB minimum)
    http://support.apple.com/kb/HT1514
    http://www.ebay.com/sch/i.html?_nkw=mac+os+x+tiger+retail+10.4
    See Tom's, (Texas Mac Man), great info on where/how to find/get Tiger...
    https://discussions.apple.com/message/15305521#15305521
    Or Ali Brown's great info on where/how to find/get Tiger...
    http://discussions.apple.com/thread.jspa?messageID=10381710#10381710
    As far as Memory, that's sort of easy, find your eMac here...
    http://eshop.macsales.com/MyOWC/Models.cfm?Family=emac&sType=Memory
    As far as Hard Drive, it's not easy to replace the Internal drive, I'd maybe suggest an external Firewire drive to boot from...
    http://eshop.macsales.com/item/Other%20World%20Computing/MAU4S7500G16/

  • Powerbook Status light on Latch ALWAYS on

    As the Subject suggests, my Powerbook 15" 1.67ghz latch status light is always on. Even as i type, the light is telling me it is 'asleep'.
    I have reset PMU, PRAM, disk permissions, reboot, etc etc.
    Any ideas? its driving me up the wall.
    my ipod dosent mount anymore either...

    Hi Ben --
    For several months, I have had the same problem as you describe. It started (and sometimes resumes) being just a flickering sleep light, then it morphs into a sleep light that's always on, sometimes it's off as it should be.
    I don't know of any quick fix, as I think the problem lies in a loose or shorted wire or connection that need to be repaired (when I can afford the down time) from the inside.
    I don't think that your iPod problem is related. If you want more help with your iPod, try posting more details about the problem and what steps you've tried to correct it in the iPod Forums here: http://discussions.apple.com/category.jspa?categoryID=146 Just pick the forum for our particular model iPod and post away.
    FInally, whatever you do, make sure you're making regular back-ups of your critical data to some safe media (external HD, cd/dvd, etc.) You don't want to be caught unprepared in the event that your sleep light problem turns out to portend more serious problems. Also, it's SOP to make a backup of your HD before sending your PB in for any repair.
    -- JDee

  • Wi-fi status light

    I recently downloaded OS X Maverick all went seemless with the exception of the desktop WI-FI status light stays illuminated whether connected to the internet or not ?

    Where is this Wi-Fi status light? I sure don't have one on my MacBook Pro!
    Clinton

  • Have 2 airport extreme base stations connected in chain.  Airport utility shows slave unit without power. However, power is on slave unit, but status lights do not show up at all. Small green lights at each back port blink.  Anyone have any ideas?

    Have 2 airport extreme base stations connected in chain.  Airport utility shows slave unit without power. However, power is on slave unit, but status lights do not show up at all. Small green lights at each back port blink.  Anyone have any ideas?

    Unfortunately, you are describing the symptoms of an AirPort Extreme with a failing (or failed) internal power supply.
    As a last resort, try a Factory Default Reset on the AirPort Extreme as follows:
    Power off the AirPort by pulling the power cord
    Wait a minute or two
    Hold in the reset button first, and keep holding it in for an additional 8-10 seconds while you simultaneously plug the power back into the AirPort
    Release the reset button and allow a full minute for the AirPort to restart
    Now try to configure the AirPort again.  If you continue to see the same symptoms as before, the AirPort will need to be replaced.

  • HT3728 No status light at all on Airport/Time capsule. I can plug internet cable directly into bac of my MAC and have internet access no problem. Is my Airport dead and need to be replaced??

    I have NO status light on my Airport/Time Machine, I unplugged the internet connection from back of Airport and plugged directly into my MAC and am able to get to the internet just fine.
    The Airport is almost 6 years old
    Is my Airport dead and just need to get a new one??

    Is my Airport dead and just need to get a new one??
    Unfortunately, yes.  On the upside, your Time Capsule lasted about twice as long as normal.

  • My airport time capsule did not set up successfully, and then status light flash amber

    Hi, Guys
      I am the first time user of the time capsule, please help how to proceed?
      I have set up the first time and my airport time capsule does not set successfully, then I try to reset to factory setting. After this, although I use the ethenet cable to connect the router to the airport, the status light flash amber, always, even after the reset.
      Also, I can see that airport time capsule base station from the wireless network when airport is plugged in. However, when I want to access to it.

    Thanks for your guidance, but the product is really anoying. First, I am sure that the airpor utilities is 6.3.
    and I also follow your instruction that to set the IPv6 as local link mode. But still get the same error as mentioned in my first post.
    Therefore, I have tried to use the bridge mode but could not find it, and therefore still can not set it up successfully, even though I reset the factory again(press the reset button 5 secconds at least).

  • Solid amber status light on ASA 5505

    Hi,
    I have a Problem with a ASA 5505
    when i power on the ASA  the Power LED change to green and the Status light to solid amber.
    There is no Console output or anything else.
    Is this a DRAM or Flash Problem?
    What can i do ?
    thanks a lot!

    Had the same problem, and this fixed it for me.  If i plug the power supply into the ASA then plug the power supply into the wall, i get the amber status light and green lights flashing failure.  However if I plug the PSU into the wall first, then wait a few minutes and plug the tiny little adapter(Fail on the adapter design Cisco) into the ASA 5505, ta-da it works!   It seems like the PSU needs to build up the power before being plugged into the ASA.  I don't know for sure, but this works for me.   I never wanted to plug in the tiny adapter first because i was afraid of it arcing in the adapter and that causeing problems, but this method works for me, hope it helps.

  • DVD Pro Is EXREMELY SLOW  and slow system

    I am running DVD Pro Studio on a PowerMac G5 with 4 meg of RAM
    It is painfully slow... the inspector freezes when I try to show shapes..
    loading assets in stills (granted they are big files) is beyond painful
    frankly I went to a mac to do just this..

    ... loading assets in stills (granted they are big files)
    If your sytem is being slowed up by large graphics - which DVD SP doesn't like - try making them the right size first.
    4:3 stills (with linear pixels) only need to be 768 x 576 pixels [PAL], or 640 x 480 pixels for NTSC, which should only require between 1 and 2 MB. Convert to 720 x 576 [PAL] TV pixels, or 720 x 480 [NTSC] TV pixels.

  • Apple TV 3 Status Light turns ON and stays ON when I turn ON my Broadband Modem. How do I stop this ?

    Since I updated my Apple TV 3 to 5.1.1, the Status Light turns ON and stays ON when I turn ON my Broadband Modem. How do I stop this ?
    At the moment I have to go to the HDMI channel that my  ATV 3 is connected to, wake the ATV, then put it back to sleep, to turn OFF the status lght.
    When I first got my ATV I did not have this problem, when it was running 5.1.0.
    I sent in a Feedback form, but they only as the option to select the OS version of a NON iOS device.
    Is there a fix to this that wont involve me leaving my modem ON all the time ?
    I turn my modem OFF when I am not using the Internet because I am a bit paranoid about the security of the data on my devices, and if I leave the modem turned ON all the time it might make me an easier target for hackers etc. { This is NOT part of my question, just explaining why I turn my modem OFF ( I feel safer ) }
    <Edited by Host>

    The ATV3 does that to me when I turn on my TV. the light goes on and stays on. If I switch to the ATV3, it seems to be half asleep with the light on ... I do wish Apple would enable the HDMI CEC and then everything would make sense. I've turned off my wireless and on again but the ATV3 light does not turn on automatically for me.
    As you pointed out, I guess this could be a small glitch on the new firmware/software update... I wonder if this could be fixed by doing a restore from the iTunes app. I might give it a try tomorrow and see what happens...
    Cheers!

  • So i connected my ipod shuffle to my apple computer and the status light on my ipod shuffle shows that it is charging but when i look for it on the pc dock or in itunes it doesn't show it at all.... so what do I do???

    so i connected my ipod shuffle to my apple computer and the status light on my ipod shuffle shows that it is charging but when i look for it on the pc dock or in itunes it doesn't show it at all.... so what do I do???

    If you have not already, I would shut down (power off) your computer.  Do this to Reset your shuffle
    http://support.apple.com/kb/HT1655
    Start up computer.  Run iTunes.  Connect shuffle.
    If you have added a new USB device recently (since the last time it worked properly), you may want to try disconnecting it to see if that makes any difference.

  • When I plug in apple tv the status light just blinks amber and nothing appears on the screen

    When I plug in my apple tv (first gen) the status light just blinks amber and nothing appears on the screen.  The status light never turns white and won't stops blinking amber.  I've tried to over ride this with the remote, resetting it and trying to revert it to the factory settings.  Is there a way to wake it up or is it a lost cause?

    Welcome to the Apple Community.
    The system looks like it's unable to start up, this could be software but more likely hardware, either way unless it will start up there is nothing a user can do to resolve this.

Maybe you are looking for

  • Payments are not allowed for business unit ..... (6000,568)

    Hello, Did anyone ever have the same error message 'Payments are not allowed for business unit (6000,568)' so that he can tell me what I did wrong? I get this message when I click on 'add' on the regular or epress deposit pages I have set up the paym

  • IR before GR

    Hi All, i am having an issue that I need to know how SAP can handle.  We have inventory that we will buy as open stock for use wherever we see fit.  This inventory comes from international vendors and at times takes 30 days or more to get here.  The

  • Mail Signature issues

    I'm having the exact issue described in this article: http://theappleblog.com/2005/12/18/mail-signatures-suck/ I've tried all the solutions suggested in the comments (including http://discussions.apple.com/thread.jspa?messageID=1485526&#1485526 ) but

  • Placing multi-page PDF's

    Maybe this question has already been posted but I could,t find it, so: You can place a pdf in keynote, but is possible to select another page than the first one from a multi-page pdf. That would really simplify the proces of putting together a presen

  • Dynamic user event

    Hello, I am a newbie regarding dynamic user events. Basically, I want to create a user event that triggers  an event structure in a subvi. To do this, I wire up a "create new user event" and then pass the refnum to my subvi "more info" as seen below.