Statutory deductions are not appearing in the Remuneration statement

Hi Friends,
I have done all configurations to Indian Payroll including ESI, PF etc.,. To configure these deductions I have used SAP standard wage types. Everything is at the configuration level. But these are not appearing in HR form. Any customisation has to be done in addition to this. Can anybody help me in this regard.
Best Regards,
KP Gupta

Krishna,
I suggest that you check the window screen as well.  Assuming you have developed the remuneration statement like most companies' pau slips, you would have created one window for Earnings and another for Deductions.  You need to assign groups to each window.  Double click anywhere inside the Deductions window and you will get a window listing the groups assigned to the window.  Double-click on the group(s) listed in the window to check if the deduction you need is listed there.
Like Ram Manohar suggested, also check the deductions side of the cumulation ID.
Also, go through the standard Remuneration Statement for India IN01 that's provided to check your form.
Let me know what you find.
Vivek

Similar Messages

  • Mail messages in my In Box are not appearing in the list of messages.

    Mail: SOME mail messages in my In Box are not appearing in the list of messages.  Instead, there's a blank line in its place if already read, or just the blue dot if unread.  But when I click on the line, the message's column/header detail appears (and I can open it).
    (Coincidental or not, immediately prior to this situation, I established a New Rule that mail coming from my son's email address should be Moved to the IN Box as they had been going to Trash.  None of the emails I'm questioning have any reference to his email address in them.)

    Continuation of info (from GDTGG): When I leave that mail message and click on a different one, the blank line marking its place once again appears for the message.  (There was a similar problem posted by someone else in 2009 entitled "Inbox Has Blank Lines" but with no apparent solution that I could find.)

  • /101,/560 are Not appearing in the RT cluster while running  the live run

    HI Experts,
    Pls help me to update the problem,While running the live payroll run the wagetypes /101,/560 are Not appearing in the RT cluster .
    and all primary wagetypes are missing in the RT log .I have checked the processing class table for each classes but its perfecly placed.Whatever I placed in the IT 8 is not appering in the RT LOG .I have run with Standard and custom schema's also for indian payroll.Any settings has been changed for basic infotype??wht could be the reson.Early respose will be appreciated.
    Regards
    Chandra

    Hi  Chandra,
    To me, your problem seems like a patch updation problem.
    Please contact your basis team.
    Technical wagetypes not coming in the RT table
    Regards,
    Dilek

  • Rendered images are not appearing on the webpage. works fine on IE. All plugins appear to be present includeing Adobe Flash

    rendered images are not appearing on the webpage. works fine on IE. All plugins appear to be present including Adobe Flash

    If that only happens on a specific page or domain then make sure that you do not block images on that domain.
    See [[Images or animations do not show]]
    *A way to see which images are blocked is to click the favicon (<i>Site Identification</i> icon) on the left side of the location bar.
    *A click on the "More Information" button will open the Security tab of the "Page Info" window (also accessible via "Tools > Page Info").
    *Go to the <i>Media</i> tab of that "Tools > Page Info" window.
    *Select the first image link and scroll down though the list with the Down arrow key.
    *If an image in the list is grayed and there is a check-mark in the box "<i>Block Images from...</i>" then remove that mark to unblock the images from that domain.
    *You can see the permissions for the domain in the current tab in Tools > Page Info > Permissions
    *You can see all image exceptions in Tools > Options > Content: Load Images > Exceptions

  • I am trying to send photos to the cloud from my phone to my iPad but they are not appearing in the stream. I have read the instructions and I think I am doing it right or am I missing a part of the process?

    I am trying to send photos to the cloud from my phone to my iPad but they are not appearing in the stream. I have read the instructions and I think I am doing it right or am I missing a part of the process?

    HI,
    Have you done this before ? And if so, is photo stream turned on on your iphone and ipad. and as Alfred DeRose pointed out they must both on the same icloud account.
    If you're new to this, you might want to do some research. Photo stream is different from camera roll and albums. Many have been on this sight looking for their photos stored in icloud after restore, etc. and they're not there. Also, after thirty days icloud deletes your photos from photo stream.
    So if you're not aware, you might want to google your question. We're using the camera connection kit soon and I am learning about it. From all I've read, I'm also not the biggest icloud fan. I use dropbox. We plan to put photos taken on ipad with a camera/iphones into albums on the ipad. We'll keep all on the sd card until (and after) they can be uploaded to a computer.
    An example of an article we can learn from -
    http://www.macobserver.com/tmo/article/how-to-understand-and-work-with-your-iclo ud-photo-stream
    Hope this helps.

  • DPM 2012 R2 Backup job FAILED for some Hyper-v VMs and Some Hyper-v VMs are not appearing in the DPM

    DPM 2012 R2  Backup job FAILED for some Hyper-v VMs
    DPM encountered a retryable VSS error. (ID 30112 Details: VssError:The writer experienced a transient error.  If the backup process is retried,
    the error may not reoccur.
     (0x800423F3))
    All the vss Writers are in stable state
    Also Some Hyper-v VMs are not appearing in the DPM 2012 R2 Console When I try to create the Protection Group please note that they are not part of cluster.
    Host is 2012 R2 and The VM is also 2012 R2.

    Hi,
    What update rollup are you running on the DPM 2012 R2 server ?  DPM 2012 R2 UR5 introduced a new refresh feature that will re-enumerate data sources on an individual protected server.
    Check for VSS errors inside the guests that are having problems being backed up.
    Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. Regards, Mike J. [MSFT]
    This posting is provided "AS IS" with no warranties, and confers no rights.

  • Fcx4 bin clips are not appearing in the viewer after clicking on them.

    fcx4 bin clips are not appearing in the viewer after clicking on them , i need help getting them to appear in the viewer.

    I have the same issue. I am using apex.oracle.com for some test applications, but for last couple of weeks when I login and click the "Application builder" I could not see my applications there (around 4-5 of them)! It says No applications found.
    Neither I have any application groups setup nor do any criteria given in "Application" search field under "Application builder".
    The only way I could access some, if not all, of my applications is to pull it from the link under the context box "Recent" (which you can see in the right hand side of the "Application builder" page.)
    Any help is greatly appreciated. This issue is not a show stopper as I could still pull out my critical applications from the recent link, but its definitely a worrisome issue.
    Thanks in advance
    Regards
    Ligon Gopinathan

  • Two external hard drive are not appearing on the desktop anymore on my 2008 24" iMac. One is a Lacie d2 Quadra and the other is a G Drive. Both are 1 Tb

    Two external hard drive are not appearing on the desktop anymore on my 2008 24" iMac. One is a Lacie d2 Quadra and the other is a G Drive. Both are 1 Tb

    Are they daisy chained? Have you tried them one at a time? Have you tried a different FireWire cable? Do they show up in either system profiler or Disk Utility? Have you reset the SMC? http://support.apple.com/kb/HT3964

  • Lead time values are not appearing in the report for current year.

    Hi friends,
    Iam checking a report in production.  where lead time values are displayed as 0 for 1 key figure lead time3 (w/0 dim) . i found there is a formula for this it shows like NODIM ( 'Lead Time 3' ).and there is a value for cal.lead time
    how can i get values in the report.
    Thanks ,
    VRV.

    Hi,
    Although your question is not clear, I understood that the formula built on that KF is NODIM. Basically it means, units of measurement is not considered when calculating.
    Eg: 5 Minutes + 5 Kilograms = 10
    You please try to analyze your KF by the above logic. Then you would be able to figure out why the data is not appearing in the report..
    Assign if helps...
    Regards,
    Suman

  • Fields are not appearing in the configuration

    HI All,
    I created new  view in the BP_HEAD component and view type is table view. In that view i created model context node and it is referring to BuilHeader bol object. these context node fields are not showing in the configuration tab. if i expand my context node folder in the configuartion , it is shoiwng empty. I am facing this problem.I changed view type table to form also it is not working.Could you help me any one .
    i

    Hi venky
    Check the generation of the context node class , check its super class it should be CL_BSP_WD_CONTEXT_NODE_TV, and your view code must support the configuration. check the below view code snippet for table
    here replace the partner with your view variable which represents the controller class context node
    <%@page language="abap" %>
    <%@extension name="thtmlb" prefix="thtmlb" %>
    <%@extension name="chtmlb" prefix="chtmlb" %>
    <%@extension name="bsp" prefix="bsp" %>
    <%
      DATA: lv_xml               TYPE string,
      lv_visible_row_count TYPE string.
      lv_xml = controller->CONFIGURATION_DESCR->GET_CONFIG_DATA( ).
    %>
    <chtmlb:configTable xml                   = "<%= lv_xml %>"
                        id                    = "ResultTable"
                        navigationMode        = "BYPAGE"
                        onRowSelection        = "Select "
                        selectionMode         = "<%= PARTNER->selection_mode %>"
                        table                 = "//PARTNER/Table"
                        usage                 = "SEARCHRESULT"
                        visibleRowCount       = "10"
                        width                 = "100%"
                        actionsMaxInRow       = "6"
                        selectedRowIndex      = "<%= PARTNER->selected_index %>"
                        selectedRowIndexTable = "<%= PARTNER->selection_tab %>" />
    The generated method GET_TABLE_LINE_SAMPLE must refer to BOL structure that you refered
    say for example if you are creating table for BuilHeader the generated code should contain the structure CRMST_HEADER_OBJECT_BUIL. (sample code snippet is given below)
        TYPES: BEGIN OF line.
        include type CRMST_HEADER_OBJECT_BUIL.
        TYPES:
               END OF line.
        CREATE DATA rv_sample TYPE line.
    Thanks & Regards
    Raj

  • My downloads are not appearing in the download folder

    (using mac) My download window--I can click on items that are there and "show in finder" and then they appear in the finder...but otherwise, my downloads folder has no new items in it and even if I search with the right file name, it will not appear.
    I recently--the same date that the most recent file is appearing--went from one Mac to the other. No idea what is happening..

    Did you check the settings for the download manager?
    *Firefox > Preferences > Privacy > History: "Remember download history"
    You can also see all downloads in the Downloads folder the Library (History > Show All History).
    You can also check the <b>browser.download.manager.retention</b> pref on the <b>about:config</b> page and make sure that it still has the default value of 2 (manually remove downloads).
    *http://kb.mozillazine.org/about:config

  • Some images are not appeared  on the JButton

    Hi all
    I want to appear an ImageIcon on my JButton
    Some images are appeared on the button when run the code,
    but some images are not and the button appeared as a default
    button why ?
    the problem in my code in this statement
    JButton   merc = new JButton (new ImageIcon(" door.jpg " ));Thanks in advance.

    I suggest that you break down your statements even further to see where the problem is.
    So if this the problem is on this line:
    JButton   merc = new JButton (new ImageIcon("door.jpg" )); //string corrected?try to break it up a bit like so:
    JButton merc = new JButton();
    File imageFile = new File("door.jpg");
    if (imageFile.exists())
       ImageIcon icon = new ImageIcon(imageFile);
       if (icon != null)
          merc.setIcon(icon);
       else
          System.out.println("icon == null");
    else
       System.out.println("image file doesn't exist");
    }

  • My Spot Colors are not appearing in the Separations

    Hello everyone!
    I'm having a problem here. I've designed a piece with spot colors, but I can't figure out why they don't appear in the separations and don't export as separate plates. My exported files end up as all process colors.
    In my searches on this problem, the most common solution is that the option in the Ink Manager to convert Spot Colors to Process is checked, but as I've shown in the below screen shot, it's not. It's grey out, which is even more confusing to me.
    I'm stumped. Help?

    If they're the same number, they'd better be the same color, right?
    Actually they are not the same at all.
    2905UP is a CMYK mode color and its Color Type is process, 2905U is a Lab mode color and its Color Type is Spot.
    2905UP is a CMYK simulation of the 2905U solid ink color and it may or may not match depending on the press conditions. Some solid ink colors can't be matched using process colors under any conditions because they are not in the CMYK color gamut.
    On screen they can also look different because the solid color's Lab definition is unaffected by the document's CMYK profile, while the bridge version is because it is a CMYK color.
    Here's the solid version on the left and the bridge version on the right with with US Web Uncoated and US Newsprint profiles. The Bridge version is a terrible match under either of those press conditions.

  • I bought 7 songs, they show up on my ipod, but are not appearing in the computer or my purchased playlist. What do I do?

    I purchased seven songs from the iTunes store on my iPod Touch.They appear all in order on my iPod, but do not appear in my library, or on my iTunes purchased account history. I am trying to burn a cd with these songs, but cannot because they won't appear on the computer. Any help?

    Did you transfer them from the ipod to the computer?

  • BW/BI WAD Templates are not appearing in the Enterprise Portal.

    Hi Experts
    We have executed BW/BI WAD Templates in the portal but they are not getting displayed where as if we execute BEx Queries its running successfully.Could anybody help us in solving the issue.
    Regards,
    Piyush S

    Hi,
    Are you getting Blank Page while executing the web Template ???
    Then the problem might caused by some outdated iView portal content.
    Deploy Supportdesk tool as per note 937697 and see if RED signals are there, if you find any then make sure you clear those
    RED signals by using remidies provided in the solution part on the same support desk tool.
    Make sure the Supportdesk tool signals are GREEN.
    Regards,
    Mani

Maybe you are looking for