Std Msg Type and Idoc Type to send multiple characteristics for equipment

Hello Experts,
I have the requirement to send all the assigned characteristics linked to an Equipment or linked to a Material, along with the all possible values BUT require only standard Message Type and Idoc Basic Type.
I found Message Type = CHRMAS and Idoc Type = CHRMAS04, BUT it contain information of ONLY one characteristic, not solve my objective (multiple characteristics in one Idoc)
Will you please provide me any standard Message Type and Idoc Basic Type that solve my above requirement?
Thanks in advance,
akg

Hello Experts,
Can you at least tell me, is there anything standrad that can fulfill my above requirement?
If not then I will proceed with custom developments; and in this case is there any complexity to transmit the custom Idoc?
Thanks in advance,
Thanks & Regards
akg

Similar Messages

  • What is inbound XML message type and idoc type in Purchase Order response

    Hi ,
    We are on SRM 7 ECS , support pack SAPKIBKV08.
    We have a process in which vendor will send a Purchase Order response  which will be
    converted to XML format by a middleware. This XML message will come to
    SRM and post a POR. I want to do the EDI mapping for this XML message,
    but there is no message type and idoc type in SRM for Purchase Order
    response. How do I map my message type in SRM to the vendor sent fields
    in middleware .
    Please advise
    Rgds
    Sumendra

    Hi,
    You can process with XML without IDoc.
    Vendor->  (XML) -> PI -> (XML) -> SRM.
    Please check PurchaseOrderConfirmation_In in namespace "http://sap.com/xi/SRM/Procurement/Global".
    http://esworkplace.sap.com
    Regards,
    Masa

  • Message types and idoc types

    hi,
         i need the list of message types and idoc types for edi.
          can any one of u pls send it.

    Hi,
    Check the OSS notes 104606.
    The following list maps the logical messages and IDoc types to the corresponding ANSI X12 transaction sets.That is, the logical message can be copied to the transaction sets named.
    204 Motor carrier shipment information
               The logical message is SHPMNT or IFTMIN, the IDoc type SHPMNT03.
    214 Transportation carrier shipment status message
               The logical message is TRXSTA, the IDoc type TRXSTA01. Inbound processing is supported.
    304 Shipping instructions
               The logical message is SHPMNT or IFTMIN, the IDoc type SHPMNT03.
    810 Invoice or billing document (also 880)
               The logical message is INVOIC, the IDoc type INVOIC01.
    812 Credit and debit advice
               The logical messages are CREADV or DEBADV, the IDoc types PEXR2001 and PEXR2002.
    820 Payment order and credit advice
               For the payment order, the logical message is PAYEXT (REMADV), the IDoc types PEXR2001 and PEXR2002.
               For the credit advice (ERS - Evaluated Receipt Settlement), the logical message is GSVERF, the IDoc type GSVERF01.
    823 Lockbox
               The logical message is LOCKBX, the IDoc type FINSTA01. Inbound processing is supported.
    830 Delivery schedule (LAB)
               The logic message is DELINS (from the EDI standard ODETTE) or DELFOR the IDOC type DELFOR01.
    832 Price catalog (also 879, 888, 889)
               The logical message is PRICAT, the IDoc type PRICAT01. Outbound processing is supported.
    834 Benefit enrollment and maintenance
               The logical message is BENREP, the IDoc type BENEFIT1. Outbound processing is supported.
    840 Request
               The logical message is REQOTE, the IDoc types ORDERS01 to ORDERS04.
    843 Quotation
               The logical message is QUOTES, the IDoc types ORDERS01 to ORDERS04.Outbound processing is supported.
    850 Purchase order or order (also 875)
               The logical message is ORDERS, the IDoc types ORDERS01 to ORDERS04.
    852 Stock and sale data
               The logical message is PROACT, the IDoc type PROACT01.
    855 Order confirmation (also 865)
               The logical message is ORDRSP, the IDoc types ORDERS01 to ORDERS04.
    856 Transport and shipping notification (ASN - Advanced Ship Notification)
               For transport in the SAP application, the logical message is SHPMNT or SHPADV, the IDoc types SHPMNT01 to SHPMNT03.
               For the delivery in the SAP application, the logic message is DESADV, the IDoc types DESADV01 (to be discontinued), DELVRY01 and DELVRY02.
    860 Ordering modification (also 876)
               The logical message is ORDCHG, the IDoc types ORDERS01 to ORDERS04.
    861 Credit advice (ERS - Evaluated Receipt Settlement)
               The logical message is GSVERF, the IDoc type GSVERF01.
    862 Delivery schedule (FAB)
               The logic message is DELINS (from the EDI standard ODETTE) or DELJIT, the IDOC type DELFOR01.
    864 Text message
               The logical message is TXTRAW, the IDoc type TXTRAW01. Inbound processing is supported.
    940 Shipping order and stock order
               The logical message is SHPORD or WHSORD, the IDOC type DELVRY01.
    945 Shipping confirmation and stock confirmation
               The logical message is SHPCON or WHSCON, the IDoc type DELVRY01.
    997 Functional acknowledgment
               This is a technical confirmation. This is not exchanged via an individual message but the status report for IDoc processing. The status values used are:
               "22" Shipping OK, acknowledgment has yet to come
               "16" Functional acknowledgment positive
               "17" Functional acknowledgment negative
               The status values "14" and "15" are available for the Interchange Acknowledgment accordingly. Source code corrections
    Cheers
    VJ

  • Message type and idoc type

    hi all,
    i'm working on integration between sap and non sap.can anyone please tell me the message types and idoc types available for Funds Management and Project system modules.it will be of a great help,full points will be alloted imm.

    What data you want to send / receive.
    The site contains all message types which sap provides.
    You can select your release and check in FI .
    You can also check in tcode WE81 for available doc types .
    Some of them I found are
    GLCORE     Master data G/L accounts (CORE IDOC)
    GLFETC     Request G/L accounts
    GLM000     Test reduction GLMAST
    GLMAST     Master data G/L accounts (master IDOC)
    GLROLL     FI-GLX message type rollup
    Your requirement is not clear as to what you want to send / receive with IDOCS.
    Cheers

  • Message type and IDoc type to update a sales order

    I can create sales order at WE19 by the message type SALESORDER_CREATEFROMDAT2 and IDoc type SALESORDER_CREATEFROMDAT202 . Can I use the same message type and IDoc type to update a sales document (sales order) and also how can I do (I mean, which structures should I use; at E1BPSDHD1X - UPDATEFLAG what should I enter? Put an X to update a document or etsc?)? I enter the "E1BPSDHD1X - UPDATEFLAG" as X, "E1BP_SENDER - LOG_SYSTEM", "E1BPSDITM - ITM_NUMBER", " E1BPSDITM - MATERIAL", "E1BPPARNR - PARTN_ROLE", "E1BPPARNR - PARTN_NUMB" and "E1BPSCHDL - REQ_QTY". The sales order quantity is at "E1BPSCHDL - REQ_QTY" and it is the field that I want to update. When I look at the transaction code BD87, I see the status text as "Enter a document number between 0005000000 and 0005999999". I cannot update the order. How can I update it? Canybody explain me in a detailed manner?
    Thanks in advance....
    Edited by: Hikmet Akcali on Oct 21, 2009 4:00 PM

    At the IDoc type pop-up selection, there are 3 types. These are: ORD_ID01, ORDERS05 and /NFM/ORDERS05. SAP system component version is SAP ECC 6.0 . I choose ORD_ID01. There are structures EDI_Z1, EDI_Z3, EDI_Z5, EDI_Z9 and EDI_Z53. Where should I enter the number of the sales document to be updated? Also, which function module should I choose?
    Edited by: Hikmet Akcali on Oct 21, 2009 5:34 PM

  • Difference between message type and idoc type

    Hi
    difference between message type and idoc type
    Regards
    Rama

    Hi,
    Message Type:
    A message type represents the application message exchanged between R/3 systems and R/3 and an external system. A message type characterises the data sent across systems and relates to the structure of the data called an IDOC type.
    Diff. with IDOC type
    An IDoc type specifies the structure of the data.
    A message type specifies the meaning of the data
    Diff. b/w IDOC type and IDOC
    An IDoc type is the definition of a specific data structure.
    An IDoc is an actual instance of data based on an IDoc type. Therefore, there can be many IDocs created from a single IDoc type.
    Example:
    MATMAS is the message type and MATMAS05 is IDoc type for Material Master.
    Thanks,
    Shankar

  • Message type and IDoc type for PGI-GR?

    hi all,
    I have to send the PGI through ALE which have to create GR . So please mention the Message type , output type of message control and IDoc type?
    Thanks
    Vamshi

    Hi,
    The Idoc Types for Post Goods Issue are
    MBGMCR01 / MBGMCR02.
    Pls check the Message type in tcode WE82.
    For output type GOTO transaction NACE-->Application V2.
    hope this helps.
    Regards,
    Sharath
    Edited by: sharath on Jun 24, 2008 7:16 PM

  • Basic type and idoc type

    hi iam having z-basic type how to find what is the standard idoc type(for ex MATMAS,Creamas) for that

    Step1. Go to WE30 and give the extended IDoc name
    Step2. Check the extension button and click on display
    Step3. Click on header button (Top 3rd left button)
    Step4. In Technical Attributes, you will get the name under "Linked Basic Type"
    Hope it solves your query...
    Regards,
    Prasoon Sahay
    Edited by: Prasoon Sahay on Sep 2, 2009 2:18 PM

  • Difference between IDOC Type and Message Type

    Hi, please let me know the difference between IDOC type and Message Type?
    Thanks

    Hi,
    Message type is business name for IDOC you are sending hiding all technical details of the IDOC.
    IDOC type gives more technical information about structure of the IDOC.
    You will be linking IDOC type to message type while processing IDOC in runtime.  You will be specifying message type and IDOC type in WE20 trasaction which says which message will go to which partner whether it is outbound or inbound.
    Best Regards,
    Krishna

  • Diff between Idoc type and message type

    Hi Friends,
    I have a created a message type and IDoc type with similar name ZVOU_IN_LYNX .
    If I have the similar names for these two , is there any further future related issues.
    kindlly suggest on this issue ASAP.
    Regards
    Punjaala

    Hi ,
    idoc type is a comibination of Segments it is like a structure.
    Message type actually tells the meaning of idoc..
    Message type + iodc type + exension idoc type used in furthe  uses..
    here actually idoc type come to use..
    we30 Idoc type          "single Idoc type--with basic type..
    we30 idoc type         "multiple idoc with above copy called extension idoc..
    WE81 Message types: Create a new messagetype         "Single message type
    WE82 Idoc Type/Message: Create Entry to link the above defined message type with the IDOC + "extension....
    WE57 Message/Application object: Create entry for Functionmodule/IDOC type/Messagetype/Object
    Edited by: Prabhu Das on Apr 17, 2009 7:27 PM

  • Idoc types and message types

    Hi ,
    Anyone can send what are all the std idoc types and message types are there in SAP?
    Coz i dnt have SAP.
    Please let me know

    The IDoc type indicates the SAP format that is to be used to interpret the data of a business transaction.
    An IDoc type consists of the following components:
    ·       a control record
    This is identical for each IDoc type.
    ·       several data records
    One data record consists of a fixed key part and a variable data part. The data part is interpreted using segments, which differ depending on the IDoc type selected.
    ·       several status records
    These are identical for each IDoc type and describe the statuses an IDoc has already passed through or the status an IDoc has attained.
    You find various IDOC / Message types in SAP -
    http://www.erpgenie.com/sapedi/message_types_masterdata.htm
    IDoc Types - Message Types -Accounting Business Processes
    IDoc Types - Message Types - HR Business Processes
    IDoc Types - Message Types - Logistics Business Processes
    Eg.
    General       Message types / IDoc types / BAPI
    Vendor        CREMAS / CREMAS02
    Customer      DEBMAS / DEBMAS03
    Accounting   Message types / IDoc types / BAPI
    G/L account   GLMAST / GLMAST01
    Cost center     COSMAS / COSMAS01
    Cost element  COELEM / COELEM01

  • Idoc type and message type

    how to find the idoc type and msg type for particular delivery no.
    [[i can see the idoc no in vl33n which i have to display in itab.]]

    <b>Message type</b>. A message type represents the application message exchanged between R/3 systems and R/3 and an external system. A message type characterizes the data sent across systems and relates to the structure of the data called an IDOC type (see below). For example, MATMAS is a message type for Material Master, and INVOIC is a message type for an Invoice (Billing Document). ALE supports over 200 message types in R/3 and about 200 application areas.
    <b>
    IDOC type and IDOC</b>. An Intermediate Document (IDOC) type represents the structure of the data associated with a message type (DEBMAS02 for message type DEBMAS — Customer Master, and WMMBID02 for message type WMMBXY— Goods Movements), while an IDOC is an object containing the data of a particular message type. IDOCs are data containers with intelligence built in. Each IDOC contains one and only one business object. For example, an IDOC of type SHPMNT01, message type SHPMNT, will contain data only of one Shipment Document. Generally, the architecture of an IDOC is independent of the message type by virtue of ALE’s ability to redefine it for any message type.
    <b>Use transaction BD64 or the following menu path to maintain the model: From the IMG (Implementation Guide), Cross-Application Components -> Distribution (ALE) (*) -> Distribution Customer Model -> Maintain Distribution Customer Model Directly -> Maintain Distribution Customer Model Directly.</b>
    Hope this helps you....
    Regards,
    Pavan

  • How  can create SEGMENTS and IDOC TYPE in BADI in ECC 6.0 version

    Hi All,
                Can any one help, how  to create SEGMENTS and IDOC TYPE in BADI in ECC 6.0 version.This is my task.
    Given BADI name was----VENDOR_ADD_DATA_BI .
    Thanks

    Anil,
    look at this thread ..may be this helps you.
    Re: 824 IDOC and BADI/User Exit
    sateesh.

  • Regarding output type and idoc trigger issue

    Hi
    i need to copy pgi quantity into sales order quantity for that i write a code into user exit MV50AFZ1. code is working fine but
    output type and idoc is not trigger due to this. In this exit to update sales order quantity i used bapi *BAPI_SALESORDER_CHANGE . can anyone tell me why o/p type and idoc not trigger ,what is the reason and what is the solution for this?
    Thanks
    Dinesh

    Hi Dinesh,
    Did you activate the enhancement for user exit ?
    Did you check if the output type is configured correctly ?
    Put a debugging point and see if control is coming there.
    Regards,
    Nisha Vengal.

  • Posting goods issue using Message type SHPCON and idoc type DELVRY03

    Hi SAP Gurus,
    I am using message type SHPCON and idoc type DELVRY01 with processing code DELV to post goods issue for a delivery note.
    I tried to simulate the inbound entry via WE19. The scenario should be posting goods issue based on the delivery order.
    In some cases, quantity issued is less than the quantity in the DO. For this, I need to change the delv quantity in the DO via VL02N before I select Post goods issue button. This will change at the same time post the goods issue.
    What I have filled up are the fields:
    E1EDL20-VBELN = DO num
    E1EDL20-VSTEL = Plant
    E1EDL18-QUALF = "PGI"
    E1EDTH13-QUALF = "006"
    E1EDTH13-NTANF = date today
    E1EDL24-POSNR = 000010
    E1EDL24-MATNR = material num
    E1EDL24-WERKS = delv plant
    E1EDL24-LGORT = sloc
    E1EDL24-LFIMG = updated quantity
    But everytime I simulate using WE19, the entire quantity in the DO is not changed at all. The goods issue quantity posted is still the original DO quantity.
    May I know how to do this? Thanks.

    Put value in E1EDL24-LGMNG for qty to pgi.

Maybe you are looking for