Step by step advice on this update PLEASE!!

I updated itunes and when I went to synchronize I was asked if I wanted to upgrade. I could just download or download and install. I choose the later. Itunes said that it had to do some special back up so I could restore my computer later. I said OK and went about my business as usual. When I got back there was an error message and my iphone is wiped clean and is apparently in recovery mode (as am I!!!) I need to just know what to do and see all these issues about the upgrade but no answers including from Apple. I'm just missing something? Do i choose restore the original settings? How do I get my data back? I absolutely need it!!! Thanks,
Theo

No, the only way to revert is to flash again with the old bios (which also can be downloaded from the bios page). Shorting out only resets the bios setup to default values, it does nothing to the bios itself. But in my almost 15 years with computers and heaps of mobos I have never had any problems after a bios flash, as far as I can remember. 8)

Similar Messages

Some advice for this newbie please ... writing Network in Java

K, i'm new to Java, and i've hardly done much Object-oriented coding but I have the basic concepts. University modules too focused on C, Visual Basic programming. =o( Currently, on Internship, I've been tasked to write Mobitex Network in Java, poll-driven. Have spent 3 weeks breathing Java =P, camping in Java Developer Connection too. =o) (enjoyed the exchange of ideas especially the post on "Java sucks")
My questions are:
1) Does Java have an indexed library like MSDN for VB? or is there any other way i can search for
method names, their uses and the syntax? (the case-sensitivity of Java had me crazily
debugging a simple test application) The lists of libraries available eg java.lang.string.*.
2) Is there a help somewhere where i can check what my errors are referring to? I'm using
JDK1.3.1_02 and Forte for Java, Community Edition version 3 for my IDE.
3) I have plans to design simple user-interface, one that would probably look dos-like but with
some buttons and forms coz the network has lots of functionalities that involve loop-back tests,
choice of sending data, control or information frames. Duration to complete this project is 2
months. Please suggest the best approach I should tackle this assignment and perhaps the
links and softwares you'd recommend.
ps: i chose this project over the rest to specifically learn Java. I knew the learning curve is steep but I seriously do want to get to know Java better, like a friend. And I'm looking forward to the sense of satisfaction awarded when I complete the application program. Thanks for your patience and words of advice. =)

oh, ok then... I assume, then, that you have access to the C and/or C++ code.
Is the C++ code written in "good" OOD style? Or is it C wrapped in some C++ syntax? If it's OO, without multiple inheritance, then you just have some porting to do. Painful, but not as bad as writing a Mobitex implementation on your own.
Of course, timing is everything in this environment; depending on your platform (J2ME, I'd guess), you're gonna have to worry about meeting real-time-ish committments...
I'd concentrate on getting the Mobitex functionality solid first. I'd assume that there are (some?) reference applications that have been created against the C & C++ implementations. Port those, or use those as inspiration for your own (little!) app...
Larry

Multiple libraries, Pbook/Pmac, advice for management & updating please.

Hi Everyone,
I travel frequently, and am looking for suggestions to keep all my iPhoto libraries up to date. I currently have a g5, Powerbook, and Mini.
I just upgraded to iPhoto 6 and I have several thousand photos on my Dual g5. I just came back with 1000 more from my diving trip. The problem is, they are on my Powerbook, and taking up alot of space on the relatively small hard drive. I managed to work through the rough upgrade from 5 to 6, and now I need some more help...
1) What is your advice for managing multiple libraries of photos.
2) What is the best way to transfer the iphoto pics (and movies) to my desktop, which of course has the larger storage capacity, after travelling...
Thanks,

Jason:
There are several different approaches to what you want to do. Let me just throw out a couple that I'm familiar with.
To get the new photos from your PB to your G5 and maintain any keywords, and other organization effort you put into them, you'll need the paid version of iPhoto Library Manager. It will allow you to merge libraries or copy between libraries and maintain the metadata, etc. That's the only way currently available to move photos from one library to another and keep the roll, keywords, comments, etc. with those photos. You can connect the two Macs with one in the Target Mode, probably your PB, and then run iPLM to move the photos to the G5 library.
Now there is a way to have a library on your PB that reflects the one on your G5 but is only a fraction of the size. That's to have an alias based library on your PB that uses the Originals folder as its source of source files. (My 25,600 files, 27G, are represented by an iPhoto Library folder of only 1.75G). When the PB is not connected with the G5, say with a LAN, it will have limited capabilities which are in part: you'll only be able to view the thumbnail files, be able to add comments, create, delete or move albums around, add keywords (but with some hassle-but it can be done). You can't do anything that requires moving thumbnails around, work with books, slideshows or calendars. Once the two computers are networked together again the library will act as normal.
Now while on the road you can have a "normal" library to import new full sized files, keyword them, add comments, etc. and then transfer to the G5 library. Once in the G5 library they will be represented in a roll(s) and corresponding folder in the Originals folder. You then fire up the "alias" library, and import those new folders in the G5 Originals folder.
It may be a lot of work but it may be one way of doing it.
I've not done any of the "sharing" with iPhoto so don't know if that's another possible candidate for transferring.
P.S. FWIW I've created this workflow for converting from a conventional library to an alias based one.

I own Photoshop CS5 and i get messages that there are updates available, but when I go to download and install them i get the message "There was an error downloading this update. Please quit and try again later. " What can I do to resolve this?

I own Photoshop CS4 and get messages that updates are available, but when I go to install them I get the following message,
"There was an error downloading this update, please try again later." I have tried numerous times with no success. What am I **** wrong?

Delete all content from following location on your machine and try updating again.
Win 7 and higher: <os-drive>:\Users\AppData\Local\Adobe\AAMUpdater\1.0\
Mac OS (User Library): ~/Library/Application Support/Adobe/AAMUpdater/1.0/
Please refer:
Access hidden user library files | Mac OS 10.7 and later
Let me know if it works for you.
Regards,
Ashutosh

Adobe CS5 Updates fails !!! There was an error downloading this update HELP

Adobe CS5 Updates fails !!! There was an error downloading this update HELP (Windows)

I have the same problem, but I'm on a mac 10.9. I have 2 folders inside the Adobe Patch folder inside the Adobe folder. The items have a bunch of letters and numbers.
I've attempted 2 downloads, each going through almost the whole process and stopping about 90% saying unable to install, fix the problems listed below (there was an error downloading this update, please quit and try again later). When I click on the consumer support for further assistance, it takes me to an Adobe page that says “This serial number is not for a qualifying product. Please try another” . I have CS4 design premium, CS5 design standard, and Acrobat Professional installed.
Thanks

So what do the 3GS users ACTUALLY get with this update!!??

I'm seeing nothing I like so far. Anything actually decent for the 3GS?

iOS 4.2 Software Update
This update contains improvements, including the following:
• AirPrint
- Print mail, photos, web pages, and more directly to
AirPrint compatible printers on a local wireless network
• AirPlay
- Wirelessly stream videos, music, and photos to
Apple TV
- Wirelessly stream music to AirPlay compatible speakers
and receivers, including AirPort Express
• Find text on the web page in Safari
• New fonts setting available for Notes
• The ability to set custom text/MMS tones per contact
• Additional restrictions (parental controls) available:
- Account settings
- App deletion
- Game Center friends
- Location settings
• Ability to import .ics files into Calendar
• Bug fixes, including:
- Eliminates sound artifacts occasionally captured in
recorded audio with 4th generation iPod touch
- Improves audio playback to car stereos via USB
• 40 security patches
Products compatible with this software update:
• iPhone 4
• iPhone 3GS
• iPhone 3G
• iPod touch 2nd generation or later
Not all improvements apply to all models. For more information, go to:
<http://www.apple.com/ipodtouch/software-update/>
<http://www.apple.com/iphone/software-update/>
For feature descriptions and complete instructions, see the user guides for iPhone and iPod touch at:
<http://support.apple.com/manuals/iphone>
<http://support.apple.com/manuals/ipodtouch>
For more information about iPhone and iPod touch, go to:
<http://www.apple.com/iphone>
<http://www.apple.com/ipodtouch>
To troubleshoot your iPhone or iPod touch, or to view additional support information go to:
<http://www.apple.com/support/iphone>
<http://www.apple.com/support/ipodtouch>
For information on the security content of this update, please visit this website:
<http://support.apple.com/kb/HT1222>

Windows Update Error Code 80072F8F! I Did All The Steps And Will Not Fix Please HELP?

No one seems they can not help me fix this error code I did many things and not one person has really
helped me, I have a question at another forum but all they do is just ask me questions tell me steps to fix this but nothing worked at all, This happened on 8/30/2014 and ever since no one can help me fix this at all....I have no money to pay for the fix...I
am on very very low limited disability income, No credit cards nothing. I need help now I paid a lot of money for my Windows 7 Ultimate and now since 8/30/2014 I got that error code no one has helped me....PLEASE help me please....And I am not sure where to
go for help here thank you. I have done many things but nothing is fixing this issue. please help...And yes I did the clock and clock keeps perfect time, doing that clock did not fix this error code at all...

Hi Angelsims,
First I also want to get more information from you to help us to troubleshhot:
1.Did this error occur on a single update or multiple updates? please also post the update name in issue.
2.Please also post the steps you have followed to fix this issue.
In addition, please try to use the general steps to troubleshoot the windows update issue, and refer to the steps below:
The following outlines how to stop services pertaining to Windows Update, rename system folders, register related DLL files, and then restart the previously mentioned services. This troubleshooting generally applies to all Windows Update related issues.
Stopping services pertaining to Windows Update
1.     Click Start, click All Programs, click Accessories, right-click Command Prompt, and select Run as Administrator.
2.     If you receive a notification from User Account Control simply click Continue.
3.     At the command prompt, type the following, commands and then press ENTER after each command.
        net stop wuauserv
        net stop bits
net stop cryptsvc
Please do not close the Command Prompt window.
Renaming folders pertaining to Windows Update
1.     At the command prompt, type the following commands, and then press Enter after each command:
2.     ren %systemroot%\System32\Catroot2 Catroot2.old
3.     ren %systemroot%\SoftwareDistribution SoftwareDistribution.old
4.     Please do not close the Command Prompt window.
Registering DLL’s pertaining to Windows Update
1.     Please copy and paste the following text into a new Notepad document, and save the file as WindowsUpdate.BAT
2.     If saved correctly the icon will change from a Notepad file to BAT file which has two blue cogs as its     icon.
   -or-
3.     You can manually type each command at the command prompt:
         regsvr32 c:\windows\system32\vbscript.dll /s
         regsvr32 c:\windows\system32\mshtml.dll /s
         regsvr32 c:\windows\system32\msjava.dll /s
         regsvr32 c:\windows\system32\jscript.dll /s
         regsvr32 c:\windows\system32\msxml.dll /s
         regsvr32 c:\windows\system32\actxprxy.dll /s
         regsvr32 c:\windows\system32\shdocvw.dll /s
         regsvr32 wuapi.dll /s
         regsvr32 wuaueng1.dll /s
         regsvr32 wuaueng.dll /s
        regsvr32 wucltui.dll /s
         regsvr32 wups2.dll /s
         regsvr32 wups.dll /s
         regsvr32 wuweb.dll /s
         regsvr32 Softpub.dll /s
        regsvr32 Mssip32.dll /s
         regsvr32 Initpki.dll /s
         regsvr32 softpub.dll /s
         regsvr32 wintrust.dll /s
         regsvr32 initpki.dll /s
        regsvr32 dssenh.dll /s
        regsvr32 rsaenh.dll /s
         regsvr32 gpkcsp.dll /s
         regsvr32 sccbase.dll /s
         regsvr32 slbcsp.dll /s
         regsvr32 cryptdlg.dll /s
         regsvr32 Urlmon.dll /s
         regsvr32 Shdocvw.dll /s
         regsvr32 Msjava.dll /s
         regsvr32 Actxprxy.dll /s
         regsvr32 Oleaut32.dll /s
        regsvr32 Mshtml.dll /s
         regsvr32 msxml.dll /s
         regsvr32 msxml2.dll /s
         regsvr32 msxml3.dll /s
         regsvr32 Browseui.dll /s
         regsvr32 shell32.dll /s
         regsvr32 wuapi.dll /s
         regsvr32 wuaueng.dll /s
         regsvr32 wuaueng1.dll /s
         regsvr32 wucltui.dll /s
         regsvr32 wups.dll /s
         regsvr32 wuweb.dll /s
         regsvr32 jscript.dll /s
         regsvr32 atl.dll /s
         regsvr32 Mssip32.dll /s
Restarting services pertaining to Windows Update
1.     Click Start, click All Programs, click Accessories, right-click Command Prompt, and select Run as Administrator.
2.     If you receive a notification from User Account Control simply click Continue.
3.     At the command prompt, type the following, commands and then
press ENTER after each command.
        net start wuauserv
        net start bits
        net start cryptsvc
   exit
Please try the steps above, if the step failed, please post the error or failure information.
If there is anything else regarding this issue, please feel free to post back.
Best Regards,
Anna Wang

HT1414 hi everyone , having trouble with restoring my iphone, i did follow the step untul extracting the update software but when the iphone start to restoring my iPhone always turn off and it say Error 21 on my PC monitor ...please help me icannot get my

hi everyone , having trouble with restoring my iphone, i did follow the step untul extracting the update software but when the iphone start to restoring my iPhone always turn off and it say Error 21 on my PC monitor ...please help me i cannot get my iPhone turn on

Error 20, 21, 23, 26, 28, 29, 34, 36, 37, 40
These errors typically occur when security software interferes with the restore and update process. FollowTroubleshooting security software issues to resolve this issue. In rare cases, these errors may be a hardware issue. If the errors persist on another computer, the device may need service.

I have Lightroom 4 and my hard drive is getting too full wiht pictures i have in lightroom. I want to move many to a thumbdrive and delete them from lightroom. what are the steps to perform this please ?

I have Lightroom 4 and my hard drive is getting too full wiht pictures i have in lightroom. I want to move many to a thumbdrive and delete them from lightroom. what are the steps to perform this please ?

If you want to be able to view, edit and export from Lightroom you can move the files using your computer OS (explorer or finder) and update the folder location by right-clicking on the folder name in the LR Library. See fig 8 at the attached link:
http://www.computer-darkroom.com/lr2_find_folder/find-folder.htm
This will work when the thumb drive is connected.
If you really have no need to keep these files off-line in LR then simply move the files, select all the thumbnails in the LR Library and hit delete. Then choose remove.

HT2534 but i have problem in step 13. i can't see step(13) because the red box that has this message "please contact itunes support to complete this transaction" apears. plz help me how can i pass this step

but i have problem in step 13. i can't see step 13 because the red box which has this message " please contact itunes support to complete this transaction" apears. plz help me how can i pass this step

You will need to do what it says, contact iTunes support. Click the Support tab above, then the Get Started link in the Contact Apple Support area and you'll be guided.
Regards.

I am unable to download Acrobat XI Standard purchased 19Feb15 & unable to locate on your web site simple steps to do this - please help; what am I not doing?

I am unable to download Acrobat XI Standard purchased 19Feb15 & unable to locate on your web site simple steps to do this - please help; what am I not doing?

Make sure you have cookies enabled and clear your cache. If it continues to fail try using a different browser.

Ever since the last update, My iTunes continues to quit unexpectedly. It will open for one second and then close. Anyone have a solution for this. Please help.

Ever since the last update, My iTunes continues to quit unexpectedly. It will open for one second and then close. Anyone have a solution for this. Please help.
I've tried my best to troubleshoot. . . opening in safe mode nothing seems to work.
In the problem report, this is the error that stood out:
Crashed Thread: 8 Dispatch queue: com.apple.iad.iadidmanager
Exception Type: EXC_BAD_ACCESS (SIGSEGV)
Exception Codes: KERN_INVALID_ADDRESS at 0x0000000000000090

Hi there navicin79,
You may find the troubleshooting steps in the articles below helpful. The first thing I would try is reinstalling iTunes as outlined in the first article.
Troubleshooting iTunes installation on Mac OS X
http://support.apple.com/kb/ht2311
OS X Mavericks: If an app freezes or quits unexpectedly
http://support.apple.com/kb/PH13975
-Griff W.

Update Unavailable with This Apple ID This update is not available for this Apple ID either because it was bought by a different user or the item was refunded or cancelled... How can i fix it Please help !!

Update Unavailable with This Apple ID This update is not available for this Apple ID either because it was bought by a different user or the item was refunded or cancelled... How can i fix it
Please help !!

Hello chiêu trần
If there is an issue with any app then use the steps in the article below to report the issue to the App Store.
iOS: Troubleshooting Messages
http://support.apple.com/kb/HT1933
Regards,
-Norm G.

There was an error downloading this update. Please quit and try again later. Error Code: U43M1D207

There was an error downloading this update. Please quit and try again later. Error Code: U43M1D207

Errors 201 & 205 & 206 & 207 or several U43 errors
-http://helpx.adobe.com/creative-cloud/kb/error-downloading-cc-apps.html
or
Please read, and reply back here with information https://forums.adobe.com/thread/1499014
-and try some steps such as changing browsers and turning off your firewall for downloads
or
A chat session where an agent may remotely look inside your computer may help
Creative Cloud chat support (all Creative Cloud customer service issues)
http://helpx.adobe.com/x-productkb/global/service-ccm.html

How to control the step motor in this situation?

I have a PHI TRIFT3 ToF-SIMS instrument. The instrument comes with a default
software. However, the software don't offer fine step motor control. I want to control
the step motor using Labview.
I got some info from a Japanese engineer of the company.
The step motor controller is connect to a card in ISA slot. In the default software, I
can send command like D2000(distance 2000) and A100(acceleration 100) to "port 2"
to control the motor. I have a manual of the commands.
However, I don't know how to send command from Labview. Here is a joysticker
connected to COM1, COM2 is used for other vacuum control. The joysticker can also
control the motor..Here are some reply from the company about the control.
"We do not use special driver for control the step motor.
This is just sending the serial command via RS232C per command instruction I
sent you before. The only difference is, to simplify the hardware, we just talk to data acq
module(wave form card) via PAHOST card(installed in ISA bus slot of the PC)
to passthru the RS232C command to stepper motor control unit.
If you try to talk to step motor. just send the RS command from Labview
platform. (of course need to connect the step motor controller from PC,
default TRIFT PC does not have a spare COM channel, might be need to add
serial etension card or add the computer for Labview control)
"TRIFT PC passthru the RS232 command throught ISA bus to PHI data
acquisition box to stepper motor control.
Joystick handled by default software , convert to stage movement
command X and Y then send thru to ISA. "
I tried to use the Basic Serial Write and Read.vi to send command to COM1 but I always
get an error"1073807246 ocurred at property node(arg 1) in VISA configure Serial prot(Instr).vi->
Basic Serial Write and Read.vi Possible reason: VISA: the resource is valid, but VISA cannot access
it." I think this happens because the default software is also open and trying to control COM1.
What should I do to accomplish the step motor control? Thanks a lot

Just to start from scratch, have you verified that you can do basic communication with your serial port, ie successfully perform a loopback test? Please let me know, and we will go from there.
Logan S.

Step by step advice on this update PLEASE!!

Similar Messages

Maybe you are looking for