Step by step process to implement the SAP ITS Mobile application

Hello Experts ,
I need Information on the SAP ITS mobile (Internet tranasaction server ).
We are currently using the RF transaction through character based hand held devices through SAP Console , Now we would like to use the GUI Touch Screen based devices .
For this we need to convert from the existing SAP Console transactions to use the functionality of ITS mobile.
I am new for this , Can you please provide the detailed configuration with step by step process to implement the SAP ITS         Mobile application to fulfilll above requirment .
Best Regards,
Rp

Hello,
Please refer to this documents:
[Implementation WM for Mobile Devices Using ITS|http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/0026c5f5-0eca-2c10-25a3-c0ed87478812&overridelayout=true]
[ITSmobile wiki|http://wiki.sdn.sap.com/wiki/display/HOME/ITSmobile]

Similar Messages

  • Issue in implementing the sap note 1401975

    Hi All,
    I am trying to implement the sap note 1401975 in the 4.7 version( SAP_APPL 470, Patch level 26). to implement this note i have to create a Function Module with export parameter of TYPE SEPA_STR_DATA_MANDATE_DATA. the problem here is the structure SEPA_STR_DATA_MANDATE_DATA not available in my system and no instructions are given in the note to create this structure. i have also implemented the prerequisite notes 1305012, 1360908.
    your Quick response will be highly appreciated.

    Reason and Prerequisites
    As a prerequisite, you require Noter 1090321 for SEPA Direct Debit and the two SEPA credit transfer Notes 1305012 and 1360908. Check whether these notes have already been implemented (search in the ABAP Dictionary (transaction SE11) for the structures FPAYHX_MDT and FPM_SEPA and check in transaction SE37 whether the function DMEE_EXIT_SEPA_21 already exists) and implement them if necessary.
    To be able to use the B2B (Business to Business) function, you also require enhancements in the SEPA third-party management (SAP Basis) that are delivered in a separate note.
    Check this prerequisite notes 1090321, 1305012 and 1360908 and its corrections present in your system
    Edited by: praveen reddy on Feb 1, 2011 2:47 PM

  • Re: SAP ITS Mobile - Layout Styling Issue

    Hi ,
    I'm facing the following issue in ITS Mobile service. where the white spaces between the form elements are not reduced though ~DYNPRO_COMPRESSION is set to 1.
    The solution i nthe following thread SAP ITS Mobile - Layout Styling Issue works fine for custom programs, but my internet service makes use of standard programs , so it is not advisable to edit the standard programs. And also tried to constrict the gaps by using a custom css-stylesheet, but all the efforts in vain.
    Kindly help,
    Regards,
    Avinash
    BRANCH - Branch to a new thread as was posted to an old and answered thread. Link and ref the previous thread.
    Message was edited by: Oisin ONidh ITS SCN Moderator

    thanks for the reply, we are using Internet Explorer for opening the URL.
    I have another issues like
    1. getting the scanned EPC value in the cursor position on the screen if datawedge application running in background but as soon as the EPC value appears int he field, the screen turns to "Page not found error" ( though in screen sequence next screen available) in short the problem is after getting EPC value in cursor field, without waiting for user/system action the page goes out.
    2. I want to write the EPC value on the RFID tag using the handheld but its not happening
    3. does the RFID handheld returns any value when EPC written succesfully on the tag ( such as tag written successfully )
    your inputs will be really useful for me.
    Thanks,
    Neha

  • Toolbar in sap its mobile

    hi,
    Iam not able to c toolbar for transaction MB01 in sap its mobile.

    Hi Ahmet,
    Please provide the below in GUI Configuration in SICF Transaction .
    ~webgui_toolbar_menu_reload  = 0
    Thanks,
    Seshadri.

  • The load process runs in the SAP GUI and the GUI will timeout if someone do

    Hi
    Our main issue: for loading DRW/BKT/Characteristics/Doc Files, I have already tested processing the Idocs in Background mode. All the Idocs failed because the background process on the SAP application server cannot access the doc files. (it has to use saphttp.exe on the client)
    help me  to solve thi sproblem
    regards,
    jagadish

    https://jdic.dev.java.net/
    The JDesktop Integration Components (JDIC) project aims to make Java� technology-based applications ("Java applications") first-class citizens of current desktop platforms without sacrificing platform independence.
    This demo application demonstrates functionality in the JDIC APIs org.jdesktop.jdic.tray package.
    It creates a tray icon on the desktop (in the System Tray Area for Windows platforms, or in the Notification Area for Unix platforms), with a caption (text), an animated icon, and an associated Swing menu containing icons. It also has a tooltip displayed when the mouse hovers over the tray icon.

  • Re: Barcode implementation for SAP ITS

    Hi !
          Can any one suggest me how to implement Barcode for SAP ITS

    This is a pretty complicated question, but I would start by reading the SAP documentation at the site below:
    http://help.sap.com/saphelp_nw04/helpdata/en/d9/4a94c851ea11d189570000e829fbbd/content.htm
    Or you can google a statement like "Implement Barcode for SAP ITS" and it will bring back a ton of information.
    Thanks,
    Joseph

  • Enterprise service in SAP Netweaver mobile application

    I want to use an enterprise service in a mobile web dynpro application using SAp Netweaver Mobile 7.1.Is it possible

    Hi Pablo,
    We are actually working with CE. Here we checked the following configurations:
    1. Network connectivity from your IDE (Window>preferences>general-->network connections).
    2. Http proxy settings of the server (http://<host>:<port>/nwa/middleware-settings)
    I think the problem is with your server's http proxy settings.
    Hope it helps.
    Regards,
    Srinivasan Subbiah

  • How to change the location of "Mobile Applications" in iTunes Library?

    Hi,
    Arch: PC i686
    OS: WinXP-Pro
    iTunes: 8.0.2.20
    I'm trying to move my "Mobile Applications" folder away to another drive to save some space because there's a quota problem on my C drive. However after searching I only found how to move 'Music Folder' away instead of the entire iTunes library.
    My understanding is iTunes needs (maybe hard-coded?) its library at "My Documements\My Music" to store the db and xml files. For potentially large music files, the "iTunes Music" can be moved away (pointed to another location).
    My question is can this also be done on "Mobile Applications" folder?
    The most desirable solution for me is to be able to create a single library folder on my external drive, and I can choose which library to connect/sync to in iTunes on different computers. Could you please advice how?
    Many thanks,
    Alex

    Move the itunes Library.itl file to your exHD.
    Then to get itunes to start using it from that new location, press *and hold* the shift key while starting itunes. Choose "use existing library" and browse out to the ITL file that is now on the exHD.
    Future app downloads will go to the Mobile Applications folder created there. It will also start downloading the itunes store artwork to the exHD.
    You can try downloading a free app to test it.

  • Re: RFID Tag Read from SAP ITS mobile

    Hello,
    I am also using MC3190 RFID Handheld and facing the same problem. can you guide me

    thanks for the reply, we are using Internet Explorer for opening the URL.
    I have another issues like
    1. getting the scanned EPC value in the cursor position on the screen if datawedge application running in background but as soon as the EPC value appears int he field, the screen turns to "Page not found error" ( though in screen sequence next screen available) in short the problem is after getting EPC value in cursor field, without waiting for user/system action the page goes out.
    2. I want to write the EPC value on the RFID tag using the handheld but its not happening
    3. does the RFID handheld returns any value when EPC written succesfully on the tag ( such as tag written successfully )
    your inputs will be really useful for me.
    Thanks,
    Neha

  • No changes in Work Processes after restarting the SAP Instance

    Dear All,
    I have made some changes in the Application Servers.
    I had 22 work processes on my Application Servers out of which, 16 were Dialog work process, 6 Background work processes and 2 Spool.
    I changed the instance profile through RZ10,
    I made Dialog work process to 14 and Background work processes to 4 and added one(1) Critical Update and one(1) Non-Critical Update without changing the number of Spool work processes which were 2.
    After i restart the instance i can see that there are 14 Dialogs 6 Background and 2 Spool.
    I cannot see the Critical and Non-Critical Update which i added in the instance profile on both the Application Servers.
    When i checked the value of parameter rdisp/wp_no_btc (background) the value is showing 4, but in sm50 the background work processes are 6.
    Please can anyone tell me why the update work processes which i added are not shown in SM50 and,
    why there are 6 background work processes showing in SM50 where as the current value for the background work process is showing 4 in RZ11.
    Thanks in advance.
    Regards,
    Mudassir.Imtiaz

    Hello All,
    I changed the Operation Modes, it started showing the changes i made.
    Thanks.
    Regards,
    Mudassir.Imtiaz

  • I am downloading the 4.0 .exe. However, I when I launch it, I am getting an error message and the process of implementing the new software aborts. Please help.

    After about 12% extraction, I am getting a "Can't open extraction file".

    If you're not a developer then you really should not have upgraded.
    I'm unsure how you can fix this as you have already done a back-up on iOS 7 and apple don't support firmware downgrades.

  • JEditorPane locking the process instead of the thread its in.

    The problem description is at :
    [http://forums.sun.com/thread.jspa?threadID=5381972&tstart=0]
    Im sorry for the link to the JRE forum but it is needed to understand where my problem now lies.
    I did manage to make my program work in multiple processes to stop my JEditorPane waiting for the InputStream from locking up the whole process. Well it still locks up the process, just its own process instead of every windows open at once. That works, but it's just a bad fix, now I need a real one.
    From what baftos told me in the thread I linked, the problem would be coming from the Swing. How can I make my JFrame that as a JEditor inside it waiting for another program's output wait without having every other JFrames wait as well?
    Like I said in the thread i linked, I did make sure my JFrames would start in different threads and the Eclipse debugger does show it starts a new threads when I open my new window.
    Edited by: Mevos on Apr 22, 2009 1:37 PM

    I just got done testing the method prigas suggested but it still locks up the wole process instead of just the thread.
    Here is the code of the button i used to test it.
         private JButton setButtonsAction(JButton bt,final int progNumber)
              bt.addActionListener(new ActionListener()
                        public void actionPerformed(ActionEvent e)
                             new Thread(new Runnable()
                                  public void run()
                                       new Initializer(progs.getProgramsList()[progNumber]);
                             ).start();
              );//Close addActionListener
              return bt;
    alan_mehio wrote:Hi,
    Try to read this article which helps in understanding concurrency in Swing Text; it uses JEditorPane to display a web page by using different threads without affecting the UI of other component. I have not got the chance to look at the sample example but I will look at it tommorrow
    http://java.sun.com/products/jfc/tsc/articles/text/concurrency/
    Regards,
    Alan Mehio
    LondonI will read your article tomorrow, it is time for me to go back home.

  • SAP BusinessObject Mobile WebI Report Prompt Issue

    Hi,
    I have problem to view the Prompt value in Long Text for WebI report in my iPad. The SAP BusinessObject Mobile application is on version 5.1.12.
    We are using BI Platform 4.1, and the WebI report is connected to Bex Query using BICS connection.
    Below are the settings that I had done:
    Setting of Characteristic in BW:
    Setting of Characteristic – ZBPARTNER in BEx Query Designer:
    Below are the report Prompt result in BI LaunchPad and BI Mobile:
    Example data:
    Business Partner ID 123 has description in Long Text (DO NOT USE - KOC ALLIANZ SIGORTA A.S) and Short Text (DO NOT USE - KOC).
    Business Partner (on top of ZBPARTNER) in WebI is showing Long Text as expected.
    For example, you can see the long text "DO NOT USE - KOC ALLIANZ SIGORTA A.S".
    Business Partner (on top of ZBPARTNER) in Mobile Apps is showing Short Text:
    For example, you can see the long text "DO NOT USE - KOC".
    I need the Prompt value is the BusinessObject Mobile to be display with Long Text, but I cannot find any configuration to achieve this.
    Is anyone encounter similar issue and can provide me some suggestion?
    Thank you in advance.
    Regards,
    Edison Wang

    Hi,
    Just like to follow up whether is there anyone encounter similar issue like above which can give me some advise?
    Thank you.
    Regards,
    Edison Wang

  • Parameters in Crystal Reports on SAP B1 Mobile App

    Hi there everyone.
    I have succesfully installed the SAP B1 Mobile application en connected to our server. After setting some Crystal reports visible for mobile I came to the conclusion that simple reports are displayed correct in the mobile app, but when a parameter is set, the report will not show. Anyone have experience with this?
    Kind regards,
    Andy

    Up!

  • Implementing the Enterprise Support in Solution Manager

    Hi Experts,
    Can anybody tell me what are the pre requisites to implement Enterprise support in solution manager?
    Also let me know what are steps involved in implementing the enterprise support.
    Thanks in Advance
    Hari

    Hello Hari,
    In order to implement Enterprise Support your organization should registered as a Value Added Reseller(VAR) with SAP. You can get all the required documentation under https://websmp104.sap-ag.de/solutionmanager --> Information for VARs, ASPs and AHPs which is in the left hand side of the page. However, you need to have a S-user ID of the VAR.
    The following are the steps need to perform in implementing the Enterprise Support firmly known as Service Desk for VARs.
    1. SAP Solution Manager basic settings (IMG)
      a) Initial Configuration Part I
      b) Maintain Profile Parameters
      c) Maintain Logical Systems
      d) Maintain SAP Customer Numbers
      e) Initial Configuration Part II
         1) Activate BC Set
             a) Activate Service Desk BC Set
             b) Activate Issue Monitoring BC set
             c) Set-up Maintainance optimizer
             d) Change online Documentation Settings
             e) Activate Solution Manager Services
             f) Activate integration with change request Managemnt
             g) Define service desk connection in Solution Manager
       2)Get components for SAP Service Market place
            a) Get SAP Components
       3) Get Service Desk Screen Profile
           a)generate Business Partener Screen
       4)Copy By price list
           a)activate Service Desk BC Set
           b)Activate Issue Monitoring BC set
           c)Set-up Maintainance optimizer
          f) Business Add-In for RFC Connections with several SAP customers
          g) Business Add-In for RFC Connection of Several SAP Cust. no.
          h) Set-Up SAP Support Connection for Customers
          i) Assign S-user for SAP Support Portal functionality
          j) Schedule Background Jobs
          k) Set-Up System Landscape
          l) Create Key Users
          m) Create Message Processor
    2. Multiple SAP Customer Numbers
          a) Business Add-In for RFC Connections with several SAP customer numbers
          b) Set-Up SAP Support Connection for Customers
    3. Data transfer from SAP
          a) Data Transfer from SAP
    4. Create u201COrganizationu201D Business Partner
    5. Service Provider function (IMG)
          a) Business Add-In for RFC Connections with several SAP customer numbers
          b) Business Add-In for Text Authorization Check
          c) Activate BC Set for Service Provider
          d) Activate Text Types
          e) Adjust Service Desk Roles for Service Provider Menu
    6. Service Provider: Value-Added Reseller (VAR)
          a) Business Add-In to Process Actions (Post-Processing Framework)
         b) Activate BC Sets for Configuration
         c) Create Hierarchy and Product Category
         d) Set-Up Subcategories
         e) Create Business Partner as Person Automatically
         f) Set-Up Automatic Confirmation of Messages
        g) Maintain Business Partner Call Times
        h) Set-Up Incident Management Work Center
    7. Work Center (Web UI)
        a) Activate Solution Manager Services
        b) Assign Work Center Roles to Users
    Hope it helps.
    Regards,
    Satish.

Maybe you are looking for