Step by step to get leopard join an AD

I would appreciate it very much if someone could tell me how to join an imac with leopard to an active directory network.
there is a part i dont understand which asks for a GUID... i dont know what to put in there. when i add the info and try to connect, it gives me an error that it cant connect to my ad.
Could someone explain what I am supposed to put in there to see if I can connect?

I decided to attack this problem backwards. I still cannot log it into the domain. Its really weird because I am using the Administrator account and password and it, still wont let me authenticate the mac into the AD. I think its an issue with the Computer OU and how the mac is sending the info, because the step where it stops is step 3, verifying credentials.
I went into the Windows 2003 Server and added the name of the machine marketingimac to the active directory and I assinged it a permanent ip. now in the mac, the field of computer id fills itself with: marketingimac, and the name of the machine in the domain is marketingimac.kisales.local both addresses ping well. So I know its not a connection problem with the network.
When in the Directory Utilities, I dont know the difference between using the 1st "tab" Directory Services or the 3rd tab, Services. The errors i get in each one are different but they are pretty much the same.
In the 1st Tab, the error I get is -14090 (eDSAuthFail), and in the 2nd tab, the error is "The username and password you have used fails do not work... please try again".
Funny thing is we can ping the mac, but the domain wont admit it to the AD. In the Services Tab, there is an option that asks:
Username: (here goes Administrator)
Password: (the password, duh)
Computer OU: CN=Computers,DC=KISALES
Now our imac is in the OU (Organizational Unit) called Computers, and the Domain Controller is KISALES.
I am going to try what you all suggested tomorrow during the day and report back. I appreciate all your input and I hope that you can help me solve this issue... anything you can think of I will appreciate you let me know... this is a first time experience for me...
Gilbert

Similar Messages

  • HT3606 I have Mac OS X version 10.5.8 and so im wondering what is the next step i need to get. i have tried to get snow leopard and other things and not having any lukck . can any one help me out pls.

    I have Mac OS X version 10.5.8 and so im wondering what is the next step i need to get. i have tried to get snow leopard and other things and not having any lukck . can any one help me out pls.

    If your Mac meets these requirements:
    http://support.apple.com/kb/SP575
    then you can order a Snow Leopard disk and install it.
    http://store.apple.com/us/product/MC573Z/A/mac-os-x-106-snow-leopard
    Ciao.

  • HT4759 I am trying to set up icloud on my Macbook. I was using the step by step guide on your site but when I open system perferences I do not have the icloud icon under internet and wireless. How do I get it?

    I am trying to set up icloud on my macbook, I was using the step by step guide on the site but when I try go into system perfences in there is no icloud icon under internet and wireless. How do I get it?

    This is presumably because you are running an earlier system than Lion. (Please always post your system when you have a question.)
    The minimum requirement for iCloud is Lion 10.7.5 (Mavericks preferred): the iCloud Preference Pane does not appear on earlier systems - the MobileMe pane appears on Lion and earlier but is non non-functional - you cannot now open or access a MobileMe account.
    To make use of iCloud you will have to upgrade your Mac to Lion or Mavericks, provided it meets the requirements.
    The requirements for Lion are:
    Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7, or Xeon processor
    2GB of memory
    OS X v10.6.6 or later (v10.6.8 recommended)
    7GB of available space
    Lion is available in the Online Apple Store ($19.99). Mountain Lion (10.8.x) is also available there at the same price but there seems little point as the system requirements are the same for Mavericks (10.9.x) - which is free - unless you need to run specific software which will run on Mountain Lion only.
    The requirements for Mountain Lion and Mavericks are:
    OS X v10.6.8 or later
    2GB of memory
    8GB of available space
      and the supported models are:
    iMac (Mid 2007 or newer)
    MacBook (Late 2008 Aluminum, or Early 2009 or newer)
    MacBook Pro (Mid/Late 2007 or newer)
    Xserve (Early 2009)
    MacBook Air (Late 2008 or newer)
    Mac mini (Early 2009 or newer)
    Mac Pro (Early 2008 or newer)
    It is available from the Mac App Store (in Applications).
      You should be aware that PPC programs (such as AppleWorks) will not run on Lion or above; and some other applications may not be compatible - there is a useful compatibility checklist at http://roaringapps.com/apps:table
      If you are running Leopard on an Intel Mac you will have to upgrade to Snow Leopard to access the Mac App Store - it's available in the online Apple Store. However if you have a PPC Mac you cannot run Snow Leopard and cannot proceed further.

  • Is there a step by step guide on upgrading from leopard to lion inlcuding data backup and migration?

    is there a step by step guide on upgrading from leopard to lion inlcuding data backup and migration?

    Let me just give you the breakdown:
    Snow Leopard (10.6) needs to be purchased. You need Snow Leopard because it has the Mac App StoreAlternatively, you could get the Lion USB drive, but much more expensive
    Once you have installed Snow Leopard, open the Mac App Store and find OS X Lion. This downloads OS X Lion Installer. After the download finishes, click on it, follow the steps and the installation begins!
    No data will be lost during any of the upgrades
    Let me know if you have any further questions.

  • In popup step how do I get the "text on the button" in the report rather than button index?

    (1)
    How do I configure the POPUP step in "SEQ MAIN.seq" to execute the second
    step (IS OUT PUT IS 20?) in "SEQ 1.seq" when "IS OUT PUT IS 20?" button
    hit and execute the third step (IS OUT PUT IS 30?) in "SEQ 1.seq" when "IS
    OUT PUT IS 30?" button hit.
    (2)
    In popup step how do I get the "text on the button" in the report rather than button index?
    File attached
    Attachments:
    test_stand.zip ‏32 KB

    The handle to the Step.Button1Label gets you the data, but there are several ways to get it into the actual report.
    The easiest is to use the reporttext.
    In a post expression, you can use something like
    Step.Result.ReportText = Evaluate("Step.Button" + Str(Step.Result.ButtonHit) +"Label")
    and then the default report generation will include it in the report. Otherwise, you need to get the text into the Resultlist by various means (check the user manual, or the TestStand II customisation course) and handle the report generation yourself inside of the appropriate sequence in the process model.
    Just my 2cents
    S.
    // it takes almost no time to rate an answer
    Attachments:
    IncludeButtonTextInReport2_0.seq ‏18 KB

  • Hello, I just bought a Snow Leopard and I have tried ti install this on my macbook pro 2008 (10.5.8) and I can not do it. I have to erase the hard drive before in order to succeed. Please tell me step by step what to do. I appreciate very much your help.

    Hello, I just bought a Snow Leopard and I have tried to install this on my macbook pro 2008 (10.5.8) and I can not do it. I have to erase the hard drive before in order to succeed. Please tell me step by step what to do. I appreciate very much your help.
    Thanks

    Here are the directions:
    http://support.apple.com/kb/HT3910?viewlocale=en_US
    Ciao.

  • Need to know how to get my apple account to sync up with a new email on my phone and delete the old one in a step by step process??

    Need to know how to get my apple account to sync up with a new email on my phone and delete the old one in a step by step process??

    After you change the account settings as I described below hold your finger on any app until they all wriggle, then tap the "-" on each purchased with her Apple ID. Press the HOME button when done. Then go to the App Store and buy or download the apps you want.

  • I am at a total loss. I received am airport express to replace a netgear router. I need a step by step list of how to get it working. I am not very technical

    I am trying to get an airport express to work, it is replacing a netgear router. Tried following the directions that came with it plus suggestions sent to me  but so  far I am not able to get things going. Can anyone send me a step by step list from start to finish and also explain what numbers, passwords etc that I would have to install. I am the stupid in the KISS method of doing things

    Hi doctorshane
    Your router is the heart of your network. Replacing one changes everything.
    Please follow Philly_Phan's instructions here:
    My airport express won't stop flashing amber and I can't figure out how to hock it up.ihad a router which worked fine
    To which I would add: disconnect your modem from power and let it rest a moment while you configure your Express. Make it a habit to do this whenever you change the device connected to a cable or DSL modem. Most modems will refuse to communicate with anything new, until its memory has been reset with a power cycle.
    If you still have difficulty please explain where you are getting stuck. If you reply in that thread, not this one, it would help others with your problem. Don't begin a new question unless the recommendations you receive are getting nowhere or your question doesn't get any replies after a day or so. Philly_Phan's instructions are correct so follow them.
    Otherwise, you are likely to repeatedly receive the same advice and will fail to achieve any progress.

  • How to get the variable value of a step (ex : Step.TS.Data) with C#?

    I try hard but do not managed, I can't get the variable situaded inside a step?
    I have created my sequence object then my step object (I can get the right name of this one)
    but I didn't find in the help the method allowing to get any value of the step variables.
    Any idea? Thank you

    Hi,
    You obtain a reference to your step as an PropertyObject.
    Using this PropertyObject reference you can use the PropertObject.GetValString|GetValNumeric|GetValBoolean.
    Hope this helps.
    Regards
    Ray Farmer
    Regards
    Ray Farmer

  • Recently had to purchase a replacement phone a friend of mine had backed up the data on the lost phone to his Mac laptop how do I get that backed up data from the lost iPhone that's on his Mac laptop to my new replacement phone? Please give step by step

    recently had to purchase a replacement phone a friend of mine had backed up the data on the lost phone to his Mac laptop how do I get that backed up data from the lost iPhone that's on his Mac laptop to my new replacement phone? Please give step by step instructions xoxoxo
    And my iTunes sign in is also screwed up... It is underneath my friends email (the one with my backed up data on his Mac laptop) HOW DO I CHANGE THIS SO THAT I CAN DOWNLOAD APP's again...

    I suspect unless he had some items in iCloud backup then they are gone.  Connecting an iPhone to a different library from that to which it was previously connected will result in the device asking if you want to erase it.

  • "Save Hierarchies" step in Process chain getting failed

    Hello all,
    After searching thoroughly through various links / forums, i failed to get a solution. So, I am posting here.
    Recently we had a system copy. After that, in Quality system - "Save all Hierarchies" step in PC is getting failed.
    I ran the process chain for 3 times till now:
    1) Sometimes, it fails at batch monitor itself with UNCAUGHT_EXCEPTION runtime error.
    2) Sometimes, it fails saying "Error 0 when reading PSA 1" & "No hierarchy found for the selection criteria entered".
    When it fails with "Error 0 when reading PSA 1", then the above Hierarchy info package which is green automatically turns RED again with Process monitor saying "No PSA tables for the selection criteria".
    I also went through the below sdn links.
    http://scn.sap.com/thread/278794
    http://scn.sap.com/thread/1753212
    Things I did:
    1) Tried replicating & activating the Transfer rules and Data source.
    2) Repeated the step, as suggested in one post.
    3) Refreshed the OLTP hierarchies in Infopack. selections.
    I have attached a screenshot of a sample Data source which says Modified, though the transfer rules are active. Also, the process chain sample.
    Please let me know, if someone has faced this issue. Whatelse did I miss? Any clue.
    Thanks,
    Vikranth.

    Hi Raman,
    I couldn't retransport, but i removed it from schedule and re-activated it. But, i think the issue lies with one of the Info objects 0PROFIT_CTR.
    Because, when i tried to check the hierarchy structure; there are duplicate entries for one code. Can we delete one of them? Is it preferable.
    I tried using OSS and used a program RSR_REPAIR_INFOAREAHIER but this showed no errors.
    Any clue?
    Thanks,
    VIkranth

  • Can i get IDOC to File scenario Step-by-Step Procedure?

    can i get IDOC to File scenario Step-by-Step Procedure?
    please provide me the step-by-step and hole procedure..please.
    Tks

    Hi,
    Check this blog-
    IDOC - File scenario
    /people/prateek.shah/blog/2005/06/08/introduction-to-idoc-xi-file-scenario-and-complete-walk-through-for-starters
    configuring IDOCS
    /people/sravya.talanki2/blog/2006/12/27/aspirant-to-learn-sap-xiyou-won-the-jackpot-if-you-read-this-part-iii
    IDOC scenarios
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/cdded790-0201-0010-6db8-beb9bb2b2660
    Idoc related setting
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/73527b2c-0501-0010-5398-c4ac372c9692
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/46759682-0401-0010-1791-bd1972bc0b8a
    Save Idoc to file
    https://wiki.sdn.sap.com/wiki/display/XI/SAPR3%28Idocs%29ToXI--Steps+Summarized
    see the below links
    /people/swaroopa.vishwanath/blog/2007/01/22/ale-configuration-for-pushing-idocs-from-sap-to-xi
    idoc settings /people/ravikumar.allampallam/blog/2005/02/23/configuration-steps-required-for-posting-idocsxi
    Also
    /people/sravya.talanki2/blog/2005/10/27/idoc146s-not-reaching-xi133-not-posted-in-the-receiver-sap-systems133
    IDOc testing - /people/suraj.sr/blog/2005/12/29/generate-test-case-for-an-idoc-scenario
    regards
    Aashish Sinha
    PS : reward points if helpful

  • Is there a step by step guide for getting splash on arch?

    hi,
    i looked every where for a step by step guide for getting splash on bootup working on arch.
    i know if you use archlinux you're suppose to figure out things for youreself, which i handle pritty well i think, but kernel stuff, i am not sure for now, and i dont have time (exams) to break my system so if anyone could point me to a step by step guide, i will thank him.

    AFAIK there isn't a way. I tried to get fbsplash working recently without much success.
    There were a few rather complicated methods, and I thought the easiest way was to use an initrd image. Obviously, the default kernel already uses one so I recompiled a kernel to have support for an initrd image, but not need to use one. Then I used splashutils to create an initrd image with the splash image contained and booted the kernel using this as an image. Kernel booted, but no splash. I then gave up. I also had to patch the splashutils scripts as they were broken in places. Right at the moment, I don't crave a splash image enough to warrant more hacking.
    fbsplash is meant to work without the fbcondecor kernel patch, so I didn't try using it. This may be a path you want to try out.
    Last edited by dyscoria (2008-06-30 08:29:58)

  • I am trying to retrieve my photos from my I phone 4s because the screen is smashed. The pc that I use is windows not an apple computer. Can anyone give me step by step instructions how I can get my photos? Also, I don't have icloud.

    I am trying to retrieve my photos from my I phone 4s because the screen is smashed. The pc that I use is windows not an apple computer. Can anyone give me step by step instructions how I can get my photos? Also, I don't have icloud

    If the iPhone is still working and the photos are in the Camera Roll (i.e., taken on the iPhone) then, when you connect the iPhone to your PC, it should be recognized as a Camera and Windows should start AutoPlay.
    See this http://windows.microsoft.com/en-us/windows/get-pictures-camera-computer#1TC=wind ows-7

  • My i phone 4 is hooked up to my PC using Windows 7. How do i get to my I Tunes site? I want to install lots of my CD's from my house into my I Phone. I need Step by Step Instructions. THANKS!!!!

    My I Phone 4 is hooked up to my PC, using Windows 7. How do I get to my I Tunes account? I am trying to load CD's through my computer into my I Phone. I need Step by Step Instructions. Thanks!!!!!!

    richardfromholbrook wrote:
    My I Phone 4 is hooked up to my PC, using Windows 7. How do I get to my I Tunes account?
    Sign in.  From iTunes click Store > Sign into Account.
    Have you tried reading the iPhone manual, specifically the section regarding syncing?
    Syncing with iTunes
    How to Sync with your Computer.
    Iphone Users Guide.

Maybe you are looking for