Steps for creating new source system

Hi guys
We are on BI 7 and ECC 6 now...We are planning to get the data from other source systems (R/3 4.6)which are existed in different place.
Now my question is what are the steps to get the data from this new Source system and whats BI developer role for this...
Example: Inorder to establish the connection between BI and R/3 we need an RFC connection (Is this done by BASIS / BI )? If its BI , then what do I need to ask for ?
afterthat what are all the questions or points that I need to raise to the folks in the meeting...
Please advice
regards

Hi
refer to this link below
http://help.sap.com/saphelp_nw04s/helpdata/en/ac/4a4e38493e4774e10000009b38f889/frameset.htm
Exactly this will be taken up by BASIS team so that at any time if we have any issues with RFCs like RFC connection failure we will not get any data to our targets.
Then we have to raise ticket to basis stating this failure

Similar Messages

  • Creating New Source System

    Hi All,
    I am trying to create a new source system in BW for the new R/3 client which is a copy of PRD.
    So now new R/3 client is 200 and also PRD is 200. I did all necessary steps and i found difficulty when i am assigning logical system based on client. I found key is only client, so as PRD system is already mentioned with client 200 i am not able to create new entries and i hope this causing me error.
    So by creating RFC destination directly in SM59 and when i tried to create it says PRD Client already available. Though i have specified new client server name.
    Kindly advise.
    This is quite urgent.
    Thank You.
    Best regards,
    Bhuvana.

    hi,
    it seems rfc connection between bw and r/3 not established properly, check with transaction sm59 (ask basis help if no authorization), choose r/3 source system rfc and menu test->authorization. check if user name and password, hostname/ip address are correct.
    this doc 'bw r/3 connectivity' may useful http://help.sap.com/bp_biv235/BI_EN/BBLibrary/documentation/B84_BB_ConfigGuide_EN_DE.doc
    hope this helps.

  • Creating new Source system problem

    Hi there,
    System: BW 3.5 client 010, want  to connect to R/3 4.6c Sandbox client 0101
    we just refreshed our BW 3.5  sandbox with current production data. Now we want to create the source system via RSA1 to point to R/3 Sandbox. When we try to create this we get this new error. I am not sure why it is
    Error:
    Logical system BIX010 exists already
    Message no. R3222
    Diagnosis
    The SAP Business Information Warehouse BIX010 is already connected to the source system. A multiple connection is not possible.
    For some reason, it is reading as BIX010(talking to the system itself) - BW Sandbox systems, it should be doing the source system creation for SBX010 not BIX010 (talking to the system itself)
    I tried to create the system manually and automatically, still no luck.
    I cannot see SBX010 source system in teh RSA1, I am afraid it might be in the database table and not showing up in the transaction RSA1, does anyone know the table that it has this information, so I can se16 and look at the entries?
    Does anyone knows where to look for?
    Thanks in Advance
    Kumar

    Goto SM50 and check for ABAP connections. Look for SBX010. If you don'T find it here you have to create it. Check also BIX010 if it'S connected to the right system.
    Regards,
    Juergen

  • Creating New Source System Connection

    [First post, so go easy on me!]
    I have created a source system connection in BW QA, to an additional R3 QA client, but I am unable to assign any datasources to the new this new connection. [I know that I should have created the connection in DEV and transported through, but I need this connection for a small test, that won't be used again.]
    To get round this, do I need to have my BW & R3 clients 'opened' again, then transfer the 'Application Component Hierarchy' via RSA9, then 'Replicate Datasources' in BW. If not, does anyone have any suggestions?
    Thanks in advance.
    Scott

    Scott,
    You will have to transfer the BC datasources that you want to use from R/3 to BW.
    in BW, right-click your source system in the modeling tab and select replicate datasources, this will take you through to your R/3 system. Select the datasources you want to use and transfer them. Then go back to your BW system and right-click the source system and select "Transfer datasources". This should make them available.
    If when you have got through to R/3 to transfer the datasources you are told that cross-client customising is not available then I think that you will have to get the client opened up.
    Cheers,
    Stuart

  • Creating new source system in bw

    hi all
    i have got one problem with creating source system to bw from r/3,i have created RFC connection to bw and r/3
    and i was trying to create source system manually and automated but it is not activating i'm getting fallowing error
    ...the fallowing errors occurred in the source systemrsar--mess no 374
    ....result of destination check timeout rsarmess no 375
    can any one help me on this please

    Hi!
    Check out the connection with defined RFC.if it is ok,then check out the privliges for the user using which yuor trying to create the source system.
    Best Regards
    Sunil.

  • Change Default Background User In BW When Creating New Source System

    Hi all,
    I would like to create a new Source System in RSA1.
    In Source Systems > SAP > Create > Connection of source system to BW
    the Default background user in BW is u201CALEREMOTEu201D.
    How do I change this to another user?

    Just want to say thank you. I could fix a problem with your information.
    I was searching to change the background user from ALEREMOTE to BWREMOTE as all our process chains were running on ALEREMOTE.

  • What are the basic steps for creating a content repository?

    I am trying to create a document store on a file system (fsdb) that will hold files that are ftp's to that location. Is this possible using KM? If so, what are the basic steps for creating a file system repository and using it through KM? I have found stuff on help.sap.com but that only tells you what each component does not what actual steps need to be taken to setup KM, such as user rights , creating an entry point, so that all of KM is not visible, etc...
    If anyone knows of any guides that show a step by step process that would be great too.
    Thanks
    Paul

    Hi Paul
    First of all you need to create a new repository
    Suppose you want to add all the documents under folder Paul under C: Drive
    (Even you can put whole documents of C: drive into Paul)
    Navigate to System Admin -> System Configuration -> Knowledge management -> Content Management -> Repository Manager -> File System Repository
    There you can create a new directory by clicking on button New
    Give the parameters as follows :-
    Name               :           Anything you like
    Description       :           Anything you want
    Prefix (must start with /)  :  Probably same as your repository name like \Paul
    Lookup mode : caseless
    Root Directory   :  C:\Paul
    NOTE:  This is the trick. You need to give the proper path means folder path which you want use as repository)
    Repository Services  :  Any services you want
    Property Search : Managercom.sapportals.wcm.repository.manager.generic.search.SimplePropertySearchManager
    Security Manager         :           AclSecurityManager
    ACL Manager Cache   :           ca_cm_rep_acl
    The save it
    Now see whether the same repository is coming under KM Content or not, if not may be after restart it will come.
    I think the above information will help you. If still you have problem, please feel free to contect me.
    Regards,
    Chamkaur

  • Problem in creating SRM source system in BW

    hi all,
    as much i knw. i can say that there are 4 steps in creating SRM source system in BW :-
    1) creating logical system for SRM client
    2)creating logical system for BW client
    3)naming background user
    4)creating SRM source system in BW.
    now i am facing some basic problems....
    1) I logon to SRM system using client 001 so do i need to assign SRM logical system i am creating to this client only.
    2) same way i logon to BW using client 800, so do i need to assign BW logical system to client 800.
    3)how can i create background users for link to SRM.
    4)does anything needs to be done in RFC.

    Hi,
    Once you read the following help on creating source system,Most of teh doubts will be cleared :
    http://help.sap.com/saphelp_nw2004s/helpdata/en/ac/4a4e38493e4774e10000009b38f889/frameset.htm
    http://help.sap.com/bestpractices/crossindustry/businessintelligence/v131/BBLibrary/documentation/B84_BB_ConfigGuide_EN_DE.doc
    With rgds,
    Anil Kumar Sharma .P

  • Create ECC source systems to talk to BI

    I am a developer and the system that I am working with do not have the source systems created. There is no Basis support here yet. Would someone help by listing the steps to create the source systems, so that the ECC systems can talk to the BI NW2004s system? I want to be able to load data.

    Hi,
    Please check these links.
    Connection between Source Systems and BW
    http://help.sap.com/saphelp_nw70/helpdata/en/00/dc54384ac9a81be10000009b38f8cf/frameset.htm
    Creating SAP Source Systems
    http://help.sap.com/saphelp_nw70/helpdata/en/ac/4a4e38493e4774e10000009b38f889/frameset.htm
    BW connectivity(.doc)
    http://help.sap.com/bp_biv335/BI_EN/BBLibrary/documentation/B84_BB_ConfigGuide_EN_DE.doc
    hope this helps
    Regards.

  • Steps to create a logical system for client 001.

    Hi,
    In client 000 go to transaction scc4. There you create your new client for sap netweaver abap trial version for BI?
    Here, can you give me steps to create a logical system with client 001 using tcode scc4.
    Thanks,
    Kannan

    hi
         First log on to SAP R/3 server connections Go to SCC4 in R/3 & in Scc4 BW server. A screen opens in that logical name of the system would be opened in both (R/3 & BW).
         Take notepad in it save .R/3 & BW logical names go to R/3 & click SM59 to create R/3 connections click then a screen opens gives BW logical name in RFC Destination option & give connection. type 3 & give some description & then press enter.
         You will get another screen under it then at target host gives BW server name we will get it from BW logon change ID, IP address option & give the system no. The system no go to logon pad just drag it then you will see the name.
         Then click on log on securities go to log on give BW server details like No, client user Password. Then save it then click test connection tab if there are errors then it gives yellow color if they are no error the whole thing come as white.
         Then click on the Remote Logon then we go to BW server give RFC – SM59 & click create. Then give the server name which is at the bottom right corner give it then give the no, name, password in logon Security save it & test connection & then remote logon.
         R/3 - B W - R/3
         Logical connection source system connection is used to transfer the data from R/3 to BW. Go to BW system& click RSA1 go to source system option go to top to the source systems right click on it. Then click create then a screens opens then.
         PC Flat file ,  DB  Database
         Select the option manual then a screen appears RFC Destination, Logical source name then click OK  then it goes to opens other screen save it test connection then remote login then it go back to the then a screen opens then click only activate.
         BW  RS1  SOURCE SYSTEM  CREATE MANUAL AUTOMATIC CELL
         R/3  Test connections login  back  replicate method  active data R/3 Source system you will able to.
    regards
    ashwin

  • Steps for creating a new BAPI function module

    Hello experts,
    Can any one send me steps for creating a new BAPI function module , I got a requirement to do like this,but I dont have any clue about how to create.
    Please help !!!

    BAPI stands for Business Application Programming Interface.
    There are 5 different steps in BAPI.
    - Create BAPI Structure  
    - Create BAPI Function Module or API Method.  
    - Create BAPI object  
    - Release BAPI Function Module.  
    - Release BAPI object.
    Step1. Creating BAPI Structure:  
    - Go to <SE11>. 
    - Select Data Type & Enter a name. 
    - Click on Create.
    - Note: Always BAPI should be in a development class with request number (Not Local Object).
    - Select Structure & hit ENTER.
    - Enter the fields from your database. Make sure that the first field is the Primary Key Field.
    - Then SAVE & ACTIVATE.
    Step 2. Creating BAPI module: 
    - Enter TR.CODE <SE37>.
    - Before entering any thing, from the present screen that you are in, select the menu
       Goto -> Function Groups -> Create Group.
       Enter a name (Note: This name Must start with ZBAPI)
       Let this screen be as it is and open another window and there, enter TR.CODE <SE80).
       Click on the Third ICON that says Inactive Objects. 
       Select the group that you just created and click on Activate. 
       Notice that the group you created will disappear from the list of inactive objects.
    - Go back to <SE37> screen and enter a name and hit <ENTER>. Then enter the group name that you just created and activated.
    NOTE: When you release a function module the respective group will be attached to that particular application. It cannot be used for any other application. NEVER include an already existing group that is attached to another module.
    Now click on the first Tab that says [ATTRIBUTES] and select the radio button that says remote-enabled module since we will be accessing this from any external system.
    Then click on the second tab that says [IMPORT].
    Enter a PARAMETER NAME, TYPE and the structure you created in the first step. Also select the check box ‘Pa’. All remotely enabled functional modules MUST be Pa enabled, where Pa means ‘Passed by Value’ and if you don’t select ‘Pa’, then that means it will be passed by reference..
    Then click on tab that says [EXPORT].
    Enter the following as is in the first three fields 
      RETURN        TYPE        BAPIRETURN (These 3 field values are always same)
      Here also select ‘Pa’ meaning Pass by value.
    Note: BAPIRETURN contains structure with message fields.
    Then SAVE and ACTIVATE.
    Step 3. Creating BAPI object: 
    - Enter Tr.Code <SWO1>   (Note. It is letter ‘O’ and not Zero).
    - Enter a name and then click on create. Enter details. 
    NOTE: Make sure that that Object Type and Program name are SAME.   
    - Enter Application ‘M’, if you are using standard table Mara. If you are using your own database then select ‘Z’ at the bottom. 
    - Then hit <ENTER>. 
    - Now we have to add ‘Methods’. High light METHODS and then select the following from the menu: 
    Goto Utilities -> API Methods -> Add Methods.
    - Enter function Module name and hit <ENTER>.
    - Select the second FORWARD ARROW button (>)to go to next step. 
    - Check if every thing looks ok and again click on FORWARD ARROW button (>).
    - Then select ‘YES’ and click on <SAVE>.
    -  Now on a different screen goto TR.CODE <SE37>.  Enter Function Module name and select from the top menu  Function Module -> Release -> Release.
    - Goback to TR.CODE <SWO1>.
    Here select the menu combination shown below in the same order.
    - Edit -> Change Release Status -> Object Type Component -> To Implemented.
    - Edit -> Change Release Status -> Object Type Component -> To Released.
    - Edit -> Change Release Status -> Object Type -> To Implemented.
    - Edit -> Change Release Status -> Object Type -> To Released.
    - Then click on <SAVE>.
    - Then click on Generate Button (4th button from left hand side looks like spinning wheel).
    - Then Click on the button that says ‘PROGRAM’ to see the source code.
    To check if this is present in work flow goto TR.CODE <BAPI>. 
    Here it shows business object repository.
    - First click on the middle button and then select “ALL” and hit ENTER.
    - Goto tab [ALPHABETICAL] and look for the object that you created. This shows that the BAPI object has been created successfully.
    regards,
    aswin

  • About creating a new source system on BW pointing to an Oracle database

    hi friends
      i m facing problems when i 
    creating a new source system on BW in AIX pointing to an Oracle database, our bw oracle use 10idatabase ,and we want to connet to 9idatabase(Windows) to get data for BW
    (1.)     in /oracle/P01/102_64/network/admin  tnsnames.ora I hava  add
    SJPT =
      (DESCRIPTION =
        (ADDRESS_LIST =
          (ADDRESS = (PROTOCOL = TCP)(HOST = 68.16.211.177)(PORT = 1521))
        (CONNECT_DATA =
          (SERVICE_NAME = SJPT)
    (2) and in etc/hosts I hava  add
    68.16.211.177 SJPT
    (3) in p01adm> tnsping SJPT it is OK
    (4)but when i
    in  BW RSA1 DATA SOURCE 
    create db connect:
    DBMS: ORA
    USER NAME: SAP
    DB PASSWORD: SAP
    [email protected]
    i t give me the error message :
    ORA-12154: TNS:could not resolve  the connect identifier
    please help me

    HI,my trans.log file is
    4 ETW000 R3trans version 6.13 (release 700 - 20.02.06 - 16:15:00).
    4 ETW000 unicode enabled version
    4 ETW000 ===============================================
    4 ETW000
    4 ETW000 date&time   : 13.11.2007 - 10:16:48
    4 ETW000 control file: <no ctrlfile>
    4 ETW000 R3trans was called as follows: R3trans -d
    4 ETW000  trace at level 2 opened for a given file pointer
    4 ETW000  [dev trc     ,00000]  Tue Nov 13 10:16:48 2007                              81  0.000081
    4 ETW000  [dev trc     ,00000]  db_con_init called                                    29  0.000110
    4 ETW000  [dev trc     ,00000]  create_con (con_name=R/3)                             50  0.000160
    4 ETW000  [dev trc     ,00000]  Loading DB library '/usr/sap/P01/SYS/exe/run/dboraslib.o' ...
    4 ETW000                                                                              43  0.000203
    4 ETW000  [dev trc     ,00000]  load shared library (/usr/sap/P01/SYS/exe/run/dboraslib.o), hdl 0
    4 ETW000                                                                           13346  0.013549
    4 ETW000  [dev trc     ,00000]  Library '/usr/sap/P01/SYS/exe/run/dboraslib.o' loaded
    4 ETW000                                                                              32  0.013581
    4 ETW000  [dev trc     ,00000]  function DbSlExpFuns loaded from library /usr/sap/P01/SYS/exe/run/dboraslib.o
    4 ETW000                                                                              35  0.013616
    4 ETW000  [dev trc     ,00000]  Version of '/usr/sap/P01/SYS/exe/run/dboraslib.o' is "700.08", patchlevel (0.46)
    4 ETW000                                                                              53  0.013669
    4 ETW000  [dev trc     ,00000]  function dsql_db_init loaded from library /usr/sap/P01/SYS/exe/run/dboraslib.o
    4 ETW000                                                                              34  0.013703
    4 ETW000  [dev trc     ,00000]  function dbdd_exp_funs loaded from library /usr/sap/P01/SYS/exe/run/dboraslib.o
    4 ETW000                                                                              53  0.013756
    4 ETW000  [dev trc     ,00000]  New connection 0 created                              23  0.013779
    4 ETW000  [dev trc     ,00000]  0: name = R/3, con_id = -000000001 state = DISCONNECTED, perm = YES, reco = NO , timeout = 000, con_max = 255, con_opt = 255, occ = NO
    4 ETW000                                                                              39  0.013818
    4 ETW000  [dev trc     ,00000]  db_con_connect (con_name=R/3)                         45  0.013863
    4 ETW000  [dev trc     ,00000]  find_con_by_name found the following connection for reuse:
    4 ETW000                                                                              32  0.013895
    4 ETW000  [dev trc     ,00000]  0: name = R/3, con_id = 000000000 state = DISCONNECTED, perm = YES, reco = NO , timeout = 000, con_max = 255, con_opt = 255, occ = NO
    4 ETW000                                                                              37  0.013932
    4 ETW000  [dev trc     ,00000]  Got LIBPATH=/usr/lib:/lib:/usr/sap/P01/SYS/exe/run:/oracle/P01/102_64/lib from environment
    4 ETW000                                                                             325  0.014257
    4 ETW000  [dev trc     ,00000]  -->oci_initialize (con_hdl=0)                         47  0.014304
    4 ETW000  [dev trc     ,00000]  Client NLS settings: AMERICAN_AMERICA.UTF8          3234  0.017538
    4 ETW000  [dev trc     ,00000]  Logon as OPS$-user to get SAPSR3's password           28  0.017566
    4 ETW000  [dev trc     ,00000]  Connecting as /@P01 on connection 0 (nls_hdl 0) ... (dbsl 700 240106)
    4 ETW000                                                                              34  0.017600
    4 ETW000  [dev trc     ,00000]  Nls CharacterSet                 NationalCharSet              C      EnvHp      ErrHp ErrHpBatch
    4 ETW000                                                                              35  0.017635
    4 ETW000  [dev trc     ,00000]    0 UTF8                                                      1 0x110f8b9c0 0x110fa3e38 0x110fa36e8
    4 ETW000                                                                              36  0.017671
    4 ETW000  [dev trc     ,00000]  Allocating service context handle for con_hdl=0       37  0.017708
    4 ETW000  [dev trc     ,00000]  Allocating server context handle                      24  0.017732
    4 ETW000  [dev trc     ,00000]  Attaching to DB Server P01 (con_hdl=0,svchp=0x110f94398,svrhp=0x110fa6158)
    4 ETW000                                                                              72  0.017804
    4 ETW000  [dev trc     ,00000]  Assigning server context 0x110fa6158 to service context 0x110f94398
    4 ETW000                                                                           36191  0.053995
    4 ETW000  [dev trc     ,00000]  Allocating user session handle                        73  0.054068
    4 ETW000  [dev trc     ,00000]  Starting user session (con_hdl=0,svchp=0x110f94398,srvhp=0x110fa6158,usrhp=0x110f937a0)
    4 ETW000                                                                              43  0.054111
    4 ETW000  [dev trc     ,00000]  Assigning user session 0x110f937a0 to service context 0x110f94398
    4 ETW000                                                                           10613  0.064724
    4 ETW000  [dev trc     ,00000]  Now '/@P01' is connected (con_hdl 0, nls_hdl 0).
    4 ETW000                                                                             964  0.065688
    4 ETW000  [dbsloci.    ,00000]  *** ERROR => ORA-942 when accessing table SAPUSER
    4 ETW000                                                                            1183  0.066871
    4 ETW000  [dev trc     ,00000]  Disconnecting from connection 0 ...                   73  0.066944
    4 ETW000  [dev trc     ,00000]  Rolling back transaction ...                          28  0.066972
    4 ETW000  [dev trc     ,00000]  Closing user session (con_hdl=0,svchp=0x110f94398,usrhp=0x110f937a0)
    4 ETW000                                                                             146  0.067118
    4 ETW000  [dev trc     ,00000]  Now I'm disconnected from ORACLE                     409  0.067527
    4 ETW000  [dev trc     ,00000]  Try to connect with default password                  23  0.067550
    4 ETW000  [dev trc     ,00000]  Connecting as SAPSR3/<pwd>@P01 on connection 0 (nls_hdl 0) ... (dbsl 700 240106)
    4 ETW000                                                                              34  0.067584
    4 ETW000  [dev trc     ,00000]  Nls CharacterSet                 NationalCharSet              C      EnvHp      ErrHp ErrHpBatch
    4 ETW000                                                                              36  0.067620
    4 ETW000  [dev trc     ,00000]    0 UTF8                                                      1 0x110f8b9c0 0x110fa3e38 0x110fa36e8
    4 ETW000                                                                              36  0.067656
    4 ETW000  [dev trc     ,00000]  Assigning username to user session 0x110f937a0        22  0.067678
    4 ETW000  [dev trc     ,00000]  Assigning password to user session 0x110f937a0        41  0.067719
    4 ETW000  [dev trc     ,00000]  Starting user session (con_hdl=0,svchp=0x110f94398,srvhp=0x110fa6158,usrhp=0x110f937a0)
    4 ETW000                                                                              37  0.067756
    4 ETW000  [dboci.c     ,00000]  *** ERROR => OCI-call 'OCISessionBegin' failed: rc = 1017
    4 ETW000                                                                           33690  0.101446
    4 ETW000  [dbsloci.    ,00000]  *** ERROR => CONNECT failed with sql error '1017'
    4 ETW000                                                                              36  0.101482
    4 ETW000  [dblink      ,00431]  ***LOG BY2=>sql error 1017   performing CON [dblink#3 @ 431]
    4 ETW000                                                                             122  0.101604
    4 ETW000  [dblink      ,00431]  ***LOG BY0=>ORA-01017: invalid username/password; logon denied [dblink#3 @ 431]
    4 ETW000                                                                              34  0.101638
    2EETW169 no connect possible: "DBMS = ORACLE                           --- dbs_ora_tnsname = 'P01'"

  • New Source System Client for BW

    Hi All,
    Currently we have R/3 QAS Clint 102 connected to BW QAS. We want to get rid of this Client 102 and connect a new QAS Client 100 (same server but different Client) to BW QAS. I created a new Source System (QAS100) in BW QAS and did a restore. 
    My question: How do I get all the Source system dependent Objects like InfoSurces, InfoPackages etc for the new Client 100 in BW QAS? Please help me and I promse to generously reward points. 
    Thanks, very much in advance.
    Srini

    Hi A.H.P,
    I am pretty sure this will resolve the issue. I will come back again and reward 10 points once we apply a working solution.
    Thank you for a quick reply.
    Srini

  • Activating transfer rules for new source system

    Hi
    we are having 2 R/3 source system in BI. I had activated all the transfer rules with the first source system and now i have created a new source sytem connecting to a different R/3 client. I tried to change the transfer rules point to the new source system using the program RS_TRANSTRU_ACTIVATE_ALL giving the new source system and the infosource name. But i get the error "No Transfer Structure Selected" when i execute the prg.
    how can i change the source system without creating the transfer rules for the new source but use the existing transfer rules and just change the source system assigned to it????
    Regards
    Sujai

    Hi Sujai,
    There are many cases when this program is used.
    When the Trans rules get de-activated due to impact,we need to first replicate the data source and activate the TR using this program.This generally occurs during the data loads in prd.
    It does not makes sense to transport it when there r no changes done to the TR.So simply,u can use this program to activate.
    If the program does not work,then you are left with the transport option.
    Thanks & Regards,
    Suchitra.V

  • Connecting MSSQL as new source system

    Dear all,
    We want to connect a MSSQL server as a new source system in SAP BW 7.0.
    Does anybody has a good "How to..." Paper which helps to connect MSSQL step by step to SAP BW?
    Thanks a lot.
    Regards
    Daniel

    Follow the below mentioned steps to create a dbconnect source system.
    1. Goto RSA1 -> Source systems. Right click and Create
    2. Give some name and description and hit enter
    3. a. Con Name : Any name (SQLSRV, etc)
    b. DBMS : MSS
    c. UserName : Any username which is present in the SQL Server. Eg: SA.
    If you have to use Windows Authentication, there is a seperate method :
    For windows authentication, you will have to add your Admin login of BI Server to the SQL Server Security logins group (For Eg: If BI Server name is BID and the admin login for this server is BIDADM, you need to add BIDADM to Logins/Users group of SQL Server and also for the specific database).
    d. Password : Anything.
    e. Con Env : MSSQL_SERVER=<sql server name> MSSQL_DBNAME=<database name> OBJECT_SOURCE= DBO.
    For Example:
    MSSQL_SERVER=ps14apollo MSSQL_DBNAME=PROJECTSERVER_REPORTING OBJECT_SOURCE=DBO
    Here ps14apollo is my SQL Server name. Similarly ProjectServer_Reporting is my database name. DBO should be the Object_Source for most of the SQL Server dbs. I think it should work in your case as well.
    f. DB RECO = select or let it remain unselected.
    g & h Max Connections & OPT Connections = 0, for unlimited connections.
    Regards,
    F-S

Maybe you are looking for

  • How to use bfile in forms

    Hi, I'm using webutil for viewing files(doc,pdf,txt).These files are stored in FTP server. But my requirement is i have to link that files with BFILE. means those file paths store in bfile. how to use bfile in forms.

  • 15" Brand New (June 2009) Macbook Pro and Capturing HD Footage

    Right now I capture HD footage in FCP from my Canon XH A1 via firewire 400 onto an external 7200 rpm hard drive connected via firewire 800. My iMac is getting a bid dated and I would like to upgrade to the highest end 15" MBP - except I'm not sure ho

  • Authorization check of Tcode FCH7 (reprint check) / FCHN (display check)

    Hello to you all, Does any of you know of an option of extended the authorization check of Tcode FCH7 (reprint check) / FCHN (display check) using authorization object F_BKPF_BEK / F_LFA1_BEK? Regards, yoav Bernstain

  • Windows 7 compatibility issue with JDeveloper 10.1.3.3

    I am using JDeveloper 10.1.3.3 on Windows 7 Professional(32-bit OS). Whenever I start JDev, I get message that the *"color scheme has been changed to Windows 7 basic"*. Again, when I scroll the development pane/structure pane/application navigator pa

  • Where can I find the update to fix the problem with the trackpad acting up?

    My trackpad has been acting up lately, with the arrow going everywhere by itself, and not being able to control it. I googled and found that it's a common problem for the 2011 Macbook Pros, and that Apple had released an update to fix the problem. Wh