Steps for portal and Microsoft LDAP server integration
Hi,
Could any one guide me steps for portal and Microsoft LDAP server integration. Need it urgently.
Thanks in advance.
Regards,
Niraj
Please don't cross post in multiple forums..
Similar Messages
-
Portal and Netscape LDAP server integration
Hi,
I am trying to integrate Netscape LDAP server (6.0) with portal server 7, but
having lots of trouble doing that.
I've followed the instructions in the developer guide and completed the following
steps:
1. added a CustomRealm named defaultLDAPRealmForNetscapeDirectoryServer in config.xml
and modified the entries to fit my environment.
2. Deployed ldapprofile.jar and customized the env variables.
After these two steps, nothing happened. Then I did the third step:
3. added a iPlanet Authenticator to the realm CompatibilityRealm, which is my
default realm for the server.
However, after step 3, I wasn't able to boot weblogic server. Please note I have
create two users, system and weblogic in my LDAP server.
I copied the stack trace below. Any suggestions will be greatly appreciated.
Weiguo
C:\prog\bea\user_projects\portalDemoDomain>"C:\prog\bea\jdk131_03\bin\java" -hotspot
-Xms128m -Xmx128m -XX:MaxPermSize=128m -Dcommerce.properties="C:\prog\bea\weblogic700\portal\weblogiccommerce.properties"
-Dweblogic.Name=portalDemoServer
-Dbea.home="C:\prog\bea" -Dweblogic.management.username= -Dweblogic.management.p
assword= -Dweblogic.ProductionModeEnabled=true -Dweblogic.management.discover=fa
lse -Djava.security.policy=="C:\prog\bea\weblogic700\server\lib\weblogic.policy"
weblogic.Server
<Nov 4, 2002 1:18:45 PM EST> <Info> <Security> <090065> <Getting boot identity
from user.>
Enter username to boot WebLogic server:weblogic
Enter password to boot WebLogic server:
Starting WebLogic Server...
<Nov 4, 2002 1:19:06 PM EST> <Notice> <Management> <140005> <Loading configuration
C:\prog\bea\user_projects\portalDemoDomain\.\config.xml>
<Nov 4, 2002 1:19:21 PM EST> <Notice> <Security> <090093> <No configuration data
was found on server portalDemoServer for realm CompatibilityRealm.>
<Nov 4, 2002 1:19:21 PM EST> <Notice> <Security> <090082> <Security initializing
using realm CompatibilityRealm.>
<Nov 4, 2002 1:19:21 PM EST> <Critical> <WebLogicServer> <000364> <Server failed
during initialization. Exception:java.lang.SecurityException: Authentication for
user weblogic denied
java.lang.SecurityException: Authentication for user weblogic denied at
weblogic.security.service.SecurityServiceManager.doBootAuthorization(
SecurityServiceManager.java:1028)
at weblogic.security.service.SecurityServiceManager.initialize(SecurityS
erviceManager.java:1166)
at weblogic.t3.srvr.T3Srvr.initialize1(T3Srvr.java:697)
at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:589)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:277)
at weblogic.Server.main(Server.java:32)
>
<Nov 4, 2002 1:19:21 PM EST> <Emergency> <WebLogicServer> <000342> <Unable to
in
itialize the server: Fatal initialization exception
Throwable: java.lang.SecurityException: Authentication for user weblogic denied
java.lang.SecurityException: Authentication for user weblogic denied
at weblogic.security.service.SecurityServiceManager.doBootAuthorization(
SecurityServiceManager.java:1028)
at weblogic.security.service.SecurityServiceManager.initialize(SecurityS
erviceManager.java:1166)
at weblogic.t3.srvr.T3Srvr.initialize1(T3Srvr.java:697)
at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:589)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:277)
at weblogic.Server.main(Server.java:32)
>
The WebLogic Server did not start up properly.
Exception raised:
java.lang.SecurityException: Authentication for user weblogic denied
at weblogic.security.service.SecurityServiceManager.doBootAuthorization(
SecurityServiceManager.java:1028)
at weblogic.security.service.SecurityServiceManager.initialize(SecurityS
erviceManager.java:1166)
at weblogic.t3.srvr.T3Srvr.initialize1(T3Srvr.java:697)
at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:589)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:277)
at weblogic.Server.main(Server.java:32)
Reason: Fatal initialization exception
Throwable: java.lang.SecurityException: Authentication for user weblogic denied
java.lang.SecurityException: Authentication for user weblogic denied
at weblogic.security.service.SecurityServiceManager.doBootAuthorization(
SecurityServiceManager.java:1028)
at weblogic.security.service.SecurityServiceManager.initialize(SecurityS
erviceManager.java:1166)
at weblogic.t3.srvr.T3Srvr.initialize1(T3Srvr.java:697)
at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:589)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:277)
at weblogic.Server.main(Server.java:32)Thanks a lot Scott. I followed your instructions and got it working to a certain
degree. I am pretty happy about the results.
There are still a few issues:
1. I had to create groups and users in my directory server in order to boot up
and logon to the server. This is expected, but is it possible to export these
user/group settings from the embedded LDAP server so that I can import them into
my directory server? Currently, the only way is manual and it's error prone. A
lot of trial and error has to happen to get there.
2. It seems that using Netscape LDAP server only allows read-only access. This
means we have to create new users/groups outside of the portal server and one
other side effect is self-registration is impossible, unless we use custom security
providers. Is this assessment correct? Since LDAP integration is so important,
wouldn't it be nice if BEA have that built-in and all we need to do is to switch
to and configure it?
3. I got duplicate users and groups in compatibility security. Obviously, one
set is from my LDAP server and the other is from the embedded one. I tried to
remove to embedded LDAP authenticator, but the duplicates are still there. How
can I get rid of the duplicates - I only want the ones from my LDAP server?
Thanks again Scott.
Weiguo
Scott Dunbar <[email protected]> wrote:
Weiguo,
WLP 7.0 uses a compatibility realm only and will not work with the
custom realm that you created for the Netscape directory server.
Configuring an LDAP compatibility realm isn't too bad and its
configuration is much like 4.0. However, it can be hard to configure
initially from the console. One way is to shut your server down and
modify config.xml directly - but make sure you make a backup copy first!
Then add something like:
<CachingRealm BasicRealm="myRealm" CacheCaseSensitive="true"
Name="wlcsCachingRealm"/>
<CustomRealm
ConfigurationData="user.filter=(&(uid=%u)(objectclass=person));
user.dn=ou=people,dc=beasys,dc=com;
server.principal=uid=dirmanager,ou=people,dc=beasys,dc=com;
membership.filter=(&(uniquemember=%M)(objectclass=groupofuniquenames));
group.filter=(&(cn=%g)(objectclass=groupofuniquenames));
server.host=somehost.beasys.com;
group.dn=ou=groups,dc=beasys,dc=com"
Name="myRealm" Password="your_password_here"
RealmClassName="weblogic.security.ldaprealmv2.LDAPRealm"/>
will enable your LDAP server. After this is setup it will be much
easier to configure via the console. Obviously you'll need to update
the parameters above for your configuration.
Weiguo Wang wrote:
Hi,
I am trying to integrate Netscape LDAP server (6.0) with portal server7, but
having lots of trouble doing that.
I've followed the instructions in the developer guide and completedthe following
steps:
1. added a CustomRealm named defaultLDAPRealmForNetscapeDirectoryServerin config.xml
and modified the entries to fit my environment.
2. Deployed ldapprofile.jar and customized the env variables.
After these two steps, nothing happened. Then I did the third step:
3. added a iPlanet Authenticator to the realm CompatibilityRealm, whichis my
default realm for the server.
However, after step 3, I wasn't able to boot weblogic server. Pleasenote I have
create two users, system and weblogic in my LDAP server.
I copied the stack trace below. Any suggestions will be greatly appreciated.
Weiguo
C:\prog\bea\user_projects\portalDemoDomain>"C:\prog\bea\jdk131_03\bin\java"-hotspot
-Xms128m -Xmx128m -XX:MaxPermSize=128m -Dcommerce.properties="C:\prog\bea\weblogic700\portal\weblogiccommerce.properties"
-Dweblogic.Name=portalDemoServer
-Dbea.home="C:\prog\bea" -Dweblogic.management.username= -Dweblogic.management.p
assword= -Dweblogic.ProductionModeEnabled=true -Dweblogic.management.discover=fa
lse -Djava.security.policy=="C:\prog\bea\weblogic700\server\lib\weblogic.policy"
weblogic.Server
<Nov 4, 2002 1:18:45 PM EST> <Info> <Security> <090065> <Getting bootidentity
from user.>
Enter username to boot WebLogic server:weblogic
Enter password to boot WebLogic server:
Starting WebLogic Server...
<Nov 4, 2002 1:19:06 PM EST> <Notice> <Management> <140005> <Loadingconfiguration
C:\prog\bea\user_projects\portalDemoDomain\.\config.xml>
<Nov 4, 2002 1:19:21 PM EST> <Notice> <Security> <090093> <No configurationdata
was found on server portalDemoServer for realm CompatibilityRealm.>
<Nov 4, 2002 1:19:21 PM EST> <Notice> <Security> <090082> <Securityinitializing
using realm CompatibilityRealm.>
<Nov 4, 2002 1:19:21 PM EST> <Critical> <WebLogicServer> <000364> <Serverfailed
during initialization. Exception:java.lang.SecurityException: Authenticationfor
user weblogic denied
java.lang.SecurityException: Authentication for user weblogic deniedat
weblogic.security.service.SecurityServiceManager.doBootAuthorization(
SecurityServiceManager.java:1028)
at weblogic.security.service.SecurityServiceManager.initialize(SecurityS
erviceManager.java:1166)
at weblogic.t3.srvr.T3Srvr.initialize1(T3Srvr.java:697)
at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:589)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:277)
at weblogic.Server.main(Server.java:32)
<Nov 4, 2002 1:19:21 PM EST> <Emergency> <WebLogicServer> <000342><Unable to
in
itialize the server: Fatal initialization exception
Throwable: java.lang.SecurityException: Authentication for user weblogicdenied
java.lang.SecurityException: Authentication for user weblogic denied
at weblogic.security.service.SecurityServiceManager.doBootAuthorization(
SecurityServiceManager.java:1028)
at weblogic.security.service.SecurityServiceManager.initialize(SecurityS
erviceManager.java:1166)
at weblogic.t3.srvr.T3Srvr.initialize1(T3Srvr.java:697)
at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:589)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:277)
at weblogic.Server.main(Server.java:32)
The WebLogic Server did not start up properly.
Exception raised:
java.lang.SecurityException: Authentication for user weblogic denied
at weblogic.security.service.SecurityServiceManager.doBootAuthorization(
SecurityServiceManager.java:1028)
at weblogic.security.service.SecurityServiceManager.initialize(SecurityS
erviceManager.java:1166)
at weblogic.t3.srvr.T3Srvr.initialize1(T3Srvr.java:697)
at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:589)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:277)
at weblogic.Server.main(Server.java:32)
Reason: Fatal initialization exception
Throwable: java.lang.SecurityException: Authentication for user weblogicdenied
java.lang.SecurityException: Authentication for user weblogic denied
at weblogic.security.service.SecurityServiceManager.doBootAuthorization(
SecurityServiceManager.java:1028)
at weblogic.security.service.SecurityServiceManager.initialize(SecurityS
erviceManager.java:1166)
at weblogic.t3.srvr.T3Srvr.initialize1(T3Srvr.java:697)
at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:589)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:277)
at weblogic.Server.main(Server.java:32)
scott dunbar bea systems,
inc.
[email protected] boulder, co
303 998 2125 usa -
CRM and Microsoft Project Server Integration
Hello,
Can anyone explain what solutions are available that can help in integrating SAP CRM with Microsoft Project Server? Is there any documentation available on this? Thanks.Hello Roberto,
E-Mail rerouting is possible with an Exchange server. We use an adress [email protected] provided from the Exchangeserver. The mail is then forwarded to [email protected] to be retrieved by our CRM System for further processing. Please ask your Exchange admin again. I think he has to get wome more information about configuration possibilities.
Regards
Gregor -
CRM 5.0 and microsoft exchange server integration
Hi,
I'm facing problem in setting up email integration in SAP CRM.
What I woul like to achieve is that an email sent to the call center should be see the email in this way:
from: customer email
to: [email protected]
The exchange server responsible says that it is not possible to do this but exchange has to change the "to" domain before sending the email and so the call center agent should see in the inbox an email like this:
from: customer email
to: [email protected]
Is it right? Any hint?
Can you help me?
Thanks in advance.
RobertoHello Roberto,
E-Mail rerouting is possible with an Exchange server. We use an adress [email protected] provided from the Exchangeserver. The mail is then forwarded to [email protected] to be retrieved by our CRM System for further processing. Please ask your Exchange admin again. I think he has to get wome more information about configuration possibilities.
Regards
Gregor -
Move datafiles and logfiles (Portal 6.0 and Microsoft SQL Server 2000)
Hello,
I have installed EP 6.0 with KMC and TREX. The database is MS SQL Server 2000.
The datafiles and the logfiles of the portal are respectively located in the directory "C:\Program Files\Microsoft SQL Server\MSSQL\Data" and in "C:\Program Files\Microsoft SQL Server\MSSQL\LOG".
I want to move these files in the disk D.
How can I do it ?
Is the procedure described in the site http://support.microsoft.com/kb/224071 correct ?
I thank you for your help.
Regards,
Anne-MarieFrancesc,
Microsoft Exchange Server Integration in EP6.0
The Microsoft Exchange server (subsequently called the Exchange server) is integrated using the Microsoft Exchange server transport. This transport integrates the scheduling capabilities of Exchange Server with SAP Enterprise Portal 6.0. The following versions of Microsoft Exchange server can be integrated with the Enterprise Portal.
· Exchange Server 5.5 SP4
· Exchange Server 2000
· Exchange Server 2003
The transport uses Microsoft Collaborative Data Objects 1.2.1 (subsequently called CDO) to access data from the Exchange server.
You can check for more details on;
http://help.sap.com/saphelp_nw04s/helpdata/en/7a/ec015c8446d447a83776d40f31c84f/frameset.htm
Regards,
James -
Portal 7 and embedded LDAP server
I searched for this on support but nothing much came up on Portal 7, so here
goes:
We're thinking of moving to LDAP for user authentication. LDAP 2 is
supported by the current Portal. What LDAP version is supported by the
embedded LDAP server that comes with WLS? Can I convert sooner or later?
Do I have to wait on something?
Should I put off putting my users into LDAP 2 (OpenLDAP) or wait and use the
embedded LDAP?
Thanks,
SteveTure,
Can use LDAP for UUP without using it for authentication/authorization? If so,
how, or at least can you kindly point to a document that descrips how?
Thanks
Ture Hoefner <[email protected]> wrote:
Hello Steve,
I think you may be confusing the LDAP v2 specification with the WLS
6.x, 7.x
V2 LdapRealm. The "V2" in "V2 LdapRealm" does not have anything to do
with the
LDAP v2 spec. It is just version 2 of the LdapRealm (
http://e-docs.bea.com/wls/docs70/secmanage/security6.html#1071872 )
Portal
doesn't really care which LDAP server you are using (and it works with
both the
original LdapRealm and the V2 LdapRealm).
When using Portal with LDAP, there are three things you can use it
for:
1) authentication/authorization, using WLS security framework, and/or
2) read-only Unified User Profile (UUP) via LdapPropertyManager in
ldapprofile.jar to get user properties from LDAP, and/or
3) read/write UUP via your own custom EntityPropertyManager to get/set
user
properties from LDAP.
If you are using LDAP for authentication/authorization, then just follow
instructions from WLS for configuring it. Your Portal app is a J2EE
app that
will use this service from your WLS app server.
If you are using LDAP for a UUP then it doesn't really matter which LDAP
server
you use, as long as it really follows the LDAP spec. Portal just uses
JNDI to
search for attributes in the LDAP server and provides them to you as
user
properties.
Steve Lewis wrote:
I searched for this on support but nothing much came up on Portal 7,so here
goes:
We're thinking of moving to LDAP for user authentication. LDAP 2 is
supported by the current Portal. What LDAP version is supported bythe
embedded LDAP server that comes with WLS? Can I convert sooner orlater?
Do I have to wait on something?
Should I put off putting my users into LDAP 2 (OpenLDAP) or wait anduse the
embedded LDAP?
Thanks,
Steve--
Ture Hoefner
BEA Systems, Inc.
4001 Discovery Drive
Suite 340
Boulder, CO 80303
www.bea.com -
How to Configure the Microsoft LDAP server??
Hi,
can any body tell me the steps for configuring microsoft LDAP server.Step 1. Change your browser's URL from http://forums.oracle.com to http://support.microsoft.com
-
How to connect Java and Microsoft SQL Server 2000
hi,
could anyone please teach me how to connect Java and SQL Sever 2000?? if possible could you guys provide me with an example??? i could hardly find any relevant resources about it...
Thanks ~!thanks for the information...
by the way hv any working module on it?? i'm new to
both Java and Microsoft SQL Server... Thanks againFirst things first... you should read this:
http://java.sun.com/docs/books/tutorial/jdbc/
This is microsofts official JDBC Driver: http://www.microsoft.com/sql/downloads/jdbcregister.asp
Install it and the documentation has some usage examples -
Hi
in our shaepoint farm we have a application server,one wfe server and one reporting server
and we are using BI solutions and running performance point service
i keep getting below error in wfe server and reporting server as well also.
Log Name: Application
Source: Microsoft-SharePoint Products-SharePoint Server
Date: 01/09/35 02:23:34 م
Event ID: 6481
Task Category: Shared Services
Level: Error
Keywords:
User: XYZPORTAL\spfarm
Computer: XYZWFE02.XYZportal.com
Description:
Application Server job failed for service instance Microsoft.Office.Server.Search.Administration.SearchDataAccessServiceInstance (b340454e-ab06-4981-80f7-81d2326a1b32).
Reason: An update conflict has occurred, and you must re-try this action. The object SearchDataAccessServiceInstance was updated by XYZPORTAL\spfarm, in the OWSTIMER (7296)
process, on machine XYZWFE02. View the tracing log for more information about the conflict.
Technical Support Details:
Microsoft.SharePoint.Administration.SPUpdatedConcurrencyException: An update conflict has occurred, and you must re-try this action. The object SearchDataAccessServiceInstance
was updated by XYZPORTAL\spfarm, in the OWSTIMER (7296) process, on machine XYZWFE02. View the tracing log for more information about the conflict.
at Microsoft.SharePoint.Administration.SPConfigurationDatabase.StoreObject(SPPersistedObject obj, Boolean storeClassIfNecessary, Boolean ensure)
at Microsoft.SharePoint.Administration.SPConfigurationDatabase.Microsoft.SharePoint.Administration.ISPPersistedStoreProvider.PutObject(SPPersistedObject persistedObject,
Boolean ensure)
at Microsoft.SharePoint.Administration.SPPersistedObject.BaseUpdate()
at Microsoft.Office.Server.Search.Administration.SearchDataAccessServiceInstance.Synchronize(Boolean calledFromSearchServiceInstance)
at Microsoft.Office.Server.Administration.ApplicationServerJob.ProvisionLocalSharedServiceInstances(Boolean isAdministrationServiceJob)
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-SharePoint Products-SharePoint Server" Guid="{C33B4F2A-64E9-4B39-BD72-F0C2F27A619A}" />
<EventID>6481</EventID>
<Version>14</Version>
<Level>2</Level>
<Task>3</Task>
<Opcode>0</Opcode>
<Keywords>0x4000000000000000</Keywords>
<TimeCreated SystemTime="2014-06-28T11:23:34.565108900Z" />
<EventRecordID>1419864</EventRecordID>
<Correlation ActivityID="{CEACAABB-34A0-41F6-88B0-0834929B654C}" />
<Execution ProcessID="14104" ThreadID="19380" />
<Channel>Application</Channel>
<Computer>XYZWFE02.XYZportal.com</Computer>
<Security UserID="S-1-5-21-681022615-1803309023-368063384-1108" />
</System>
<EventData>
<Data Name="string0">Microsoft.Office.Server.Search.Administration.SearchDataAccessServiceInstance</Data>
<Data Name="string1">b340454e-ab06-4981-80f7-81d2326a1b32</Data>
<Data Name="string2">An update conflict has occurred, and you must re-try this action. The object SearchDataAccessServiceInstance was
updated by XYZPORTAL\spfarm, in the OWSTIMER (7296) process, on machine XYZWFE02. View the tracing log for more information about the conflict.</Data>
<Data Name="string3">Microsoft.SharePoint.Administration.SPUpdatedConcurrencyException: An update conflict has occurred, and you must
re-try this action. The object SearchDataAccessServiceInstance was updated by XYZPORTAL\spfarm, in the OWSTIMER (7296) process, on machine XYZWFE02. View the tracing log for more information about the conflict.
at Microsoft.SharePoint.Administration.SPConfigurationDatabase.StoreObject(SPPersistedObject obj, Boolean storeClassIfNecessary, Boolean ensure)
at Microsoft.SharePoint.Administration.SPConfigurationDatabase.Microsoft.SharePoint.Administration.ISPPersistedStoreProvider.PutObject(SPPersistedObject persistedObject,
Boolean ensure)
at Microsoft.SharePoint.Administration.SPPersistedObject.BaseUpdate()
at Microsoft.Office.Server.Search.Administration.SearchDataAccessServiceInstance.Synchronize(Boolean calledFromSearchServiceInstance)
at Microsoft.Office.Server.Administration.ApplicationServerJob.ProvisionLocalSharedServiceInstances(Boolean isAdministrationServiceJob)</Data>
</EventData>
</Event>
adilHI
I cleared the configuration cache and restarted the Reporting server ,
and performance point service,
and bi Pointers working fine and after some time it stopped to render data,
and received below error messge in wfe server
Log Name: Application
Source: Microsoft-SharePoint Products-PerformancePoint Service
Date: 04/09/35 01:44:58
م
Event ID: 1
Task Category: PerformancePoint Services
Level: Error
Keywords:
User: NT AUTHORITY\IUSR
Computer: XYZWFE02.XYZportal.com
Description:
An exception occurred while the width of the Web. Diagnostic information that may help determine the cause of the following in this issue:
Microsoft.PerformancePoint.Scorecards.BpmException: There is a problem in the preparation of a Web Part for display.
Error code "Services PerformancePoint" is 20700.Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-SharePoint Products-PerformancePoint Service" Guid="{A7CD5295-CBBA-4DCA-8B67-D5BE061B6FAE}" />
<EventID>1</EventID>
<Version>14</Version>
<Level>2</Level>
<Task>1</Task>
<Opcode>0</Opcode>
<Keywords>0x4000000000000000</Keywords>
<TimeCreated SystemTime="2014-07-01T10:44:58.277694100Z" />
<EventRecordID>1426175</EventRecordID>
<Correlation ActivityID="{C4FDF79F-347D-48C5-8F2D-B732D353F20E}" />
<Execution ProcessID="17088" ThreadID="18964" />
<Channel>Application</Channel>
<Computer>XYZWFE02.XYZportal.com</Computer>
<Security UserID="S-1-5-17" />
</System>
</Event>
adil -
Oracle alerts and microsoft exchange server
Hi,
We are working on Oracle Applications 11i (fail over on 2 servers) which is installed on Solaris 64 bit .
AND I am trying to configure Oracle Alerts with Microsoft Exchange Server.
I am following the note: Oracle Applications And Microsoft Exchange Server-Interoperability Guide.
At the step of configuring the exchange Server I need to know the account used to run the Concurrent Manager service.
How can i check that?
Thanks.Hi,
At the step of configuring the exchange Server I need to know the account used to run the Concurrent Manager service.
How can i check that?Most probably it is applmgr user.
To verify, issue "cd $COMMON_TOP/admin/scripts/<CONTEXT_NAME>", then "ls -l adcmctl.sh". This should should the OS owner of the script (the OS user which is used to start the CM). Or, you could check the value of the "s_appsuser" context variable in the application context file to determine the user.
Regards,
Hussein -
GRC AC V10 - one approval step for manager and role owner
Hello Community,
I have one, perhaps easy, question. Where is it possible to maintain the solution of one approval step for manager and roleowner, if both are unique.
E.g.:
simple approval workflow: manager stage afterwards roleowner stage afterwards auto-provisioning
So if the request is routed to the manager and the manager is also the roleowner of the requested authorization role (same UserID). The user has to approve one and the same request twice.
Is it possible in V.10 to change the config that the user has only to approve the request once? And then to decide on which relevant stage settings are valid for this process.
Thanks,
AlexaHi Alexa,
We have had a similar questions raised in a project. In an ideal world, a single "Sign-off approval" would be a great functionality where the same user has to approve the same consecutive stages, but the reason for different stages would entail that the responsibilities entailed per stage differ, e.g. Line Manager would just check the over request, and the role owner etc may be reviewing the elegibility of a specifc role etc.
If it is likely to be the same person reviewing the 2 consecutive stages, maybe a single stage workflow would be sufficient to cover this scenario.
I think the logic you are trying to configure in the workflow is possible but will require alot of work with knowing how to create a clever custom workflow with BRF+ or the actual WF stuff in SAP itself. -
Just looking steps for Lenovo and HP each model example what is link to download the driver files
DELL offers cab file and lenovo,HP what type of driver files just looking steps for Lenovo and HP each model example what is link to download the driver files and other settings used in task sequence or package
This should help you out:
Lenovo: http://support.lenovo.com/en/documents/ht074984
HP:
http://www.deploymentresearch.com/Research/tabid/62/EntryId/55/HP-takes-the-next-step-and-provides-ready-made-driver-packages-for-MDT-and-SCCM.aspx
My Blog: http://www.petervanderwoude.nl/
Follow me on twitter: pvanderwoude -
Guide me config steps for REceive and put away materials
Hi ,
I am new this module.
Please guide me all cofiguration steps for Receive and Put away materials in MM system.
Thanks,HI,
read sap help and search on Google.or in forum
[http://help.sap.com/saphelp_46b/helpdata/en/fd/45b7ee9d6411d189b60000e829fbbd/frameset.htm]
Regards
Kailas Ugale -
Are documents created with Microsoft office for windows and Microsoft office for mac are compatible with each other?
As with a lot of software, it depends on the version of Word, and what features the author used.
Technically, Office 2010 for Windows and 2011 for Mac are supposed to be feature compatible. As are Office 2007 for Windows, and 2008 for Mac.
However, if a person using Office 2010 / 2011 used a feature that only exists in that version and sends the file to someone using Office 2007 / 2008, they would very likely have trouble opening the file, or having it display as intended. -
LDAPRealm and Microsoft Site Server (LDAP)
I have problem setting up the LDAPRealm in Weblogic Commerce 2.0.1 and
Personalisation Server connecting to a Microsoft Site Server.
The ldaprealm.properties file is as below:
weblogic.security.ldaprealm.url=ldap://localhost:389
weblogic.security.ldaprealm.principal=cn=Administrator
weblogic.security.ldaprealm.credential=password
weblogic.security.ldaprealm.ssl=false
weblogic.security.ldaprealm.authentication=none
weblogic.security.ldaprealm.userAuthentication=local
weblogic.security.ldaprealm.version=2
weblogic.security.ldaprealm.userDN=o=test, ou=Members
weblogic.security.ldaprealm.userNameAttribute=cn
weblogic.security.ldaprealm.userPasswordAttribute=userpassword
weblogic.security.ldaprealm.userCommonNameAttribute=cn
weblogic.security.ldaprealm.groupDN=o=test, ou=Groups
weblogic.security.ldaprealm.groupNameAttribute=cn
weblogic.security.ldaprealm.groupIsContext=true
weblogic.security.ldaprealm.groupUsernameAttribute=cn
The server runs and halts at the last line of log:
Fri Jul 28 11:58:21 GMT 2000:<I> <WebLogicServer> Server loading from
weblogic.class.path. EJB redeployment enabled.
Fri Jul 28 11:58:21 GMT 2000:<D> <CachingRealm> acl size = 211, pos ttl =60,
neg ttl = 10
Fri Jul 28 11:58:21 GMT 2000:<D> <CachingRealm> auth size = 211, pos ttl =
60, neg ttl = 10
Fri Jul 28 11:58:21 GMT 2000:<D> <CachingRealm> group size = 17, pos ttl =
600, neg ttl = 600
Fri Jul 28 11:58:21 GMT 2000:<D> <CachingRealm> perm size = 10000, pos ttl =
600, neg ttl = 600
Fri Jul 28 11:58:21 GMT 2000:<D> <CachingRealm> user size = 10000, pos ttl =
600, neg ttl = 600
Fri Jul 28 11:58:21 GMT 2000:<D> <CachingRealm> getAclOwner("weblogic")
Fri Jul 28 11:58:21 GMT 2000:<D> <CachingRealm> rewriting ACL
"weblogic.jdbc.connectionPool.commercePool"
Fri Jul 28 11:58:21 GMT 2000:<D> <CachingRealm> getPermission("reserve")
Fri Jul 28 11:58:21 GMT 2000:<D> <CachingRealm> perm: backup HAS reserve
Fri Jul 28 11:58:21 GMT 2000:<D> <CachingRealm> getPrincipal("everyone")
Fri Jul 28 11:58:21 GMT 2000:<D> <CachingRealm> getGroup("everyone")
Fri Jul 28 11:58:21 GMT 2000:<D> <LDAPRealm> getGroup("everyone")
Fri Jul 28 11:58:21 GMT 2000:<D> <LDAPRealm> search("o=telewest, ou=Groups,
cn=everyone", "cn", "*")
Fri Jul 28 11:58:21 GMT 2000:<D> <LDAPRealm> lookup("o=telewest, ou=Groups,
cn=everyone")
Fri Jul 28 11:58:21 GMT 2000:<D> <LDAPRealm> new JNDI context
The server halted at that line. Can anyone explain that situation?
We are sure that we could connect to the LDAP server since we have a JSP
page connecting to the LDAP using the SUN's jndi-ldap driver. Would that be
a LDAP version problem, if that is so, how could we set the
"java.naming.ldap.version=2" environment variable as I have said in my JSP
page.
Thanks for answering.Yes, sorry by the mistake.
"ramesh" <[email protected]> wrote:
I think Johnny is trying to say : "If you change to SP9" or above...
Try to get a copy of the ldaprealm.properties file from the unzipped
SP8 and
above. It is self explanatory from there. The current ldaprealm.properties
which comes with WLS 5.1 and upto sp7 has been changed in SP8 and above.
Yes my configuration is also same as his.
Hope this helps.
Ramesh
"Johnny Valdez" <[email protected]> wrote in message
news:3b44ebb3$[email protected]..
I recommend you change your service pack to 9, because the 6 has someproblems
with LDAP...
if you change to sp6 you could use this
### Server type
server.alias=microsoft
### Microsoft Site Server
# This follows the default Microsoft Site Server (MSS) schema.
microsoft.server.host=ldapserver.example.com
microsoft.server.principal=cn=Administrator, ou=Members,o=ExampleMembershipDir
# microsoft.server.credential=*secret*
microsoft.user.dn=ou=Members, o=ExampleMembershipDir
microsoft.user.filter=(&(cn=%u)(objectclass=member))
microsoft.group.dn=ou=Groups, o=ExampleMembershipDir
microsoft.group.filter=(&(cn=%g)(objectclass=mgroup))
create a file ldaprealm.properties with this configuration and saveit
into the
Weblogic root directory.
greetings..
"Satya Ghattu" <[email protected]> wrote:
Hello,
I am trying to use an Microsoft site server as my LDAPRealm with weblogic
5.1 sp6, but in vain. Is there anybody out there who configured microsoft
site server with WLS sp6 and lesser? If yes, could you please post
your
configuaration properties?
Thank you,
-satya
Maybe you are looking for
-
Hi friends, I had a sale order with 10 qty where i did delivery and PGI for 5 qty. Now the sale order status will be shown as being processed. But I will not process the remaining 5 qty in sale order. So I want the present sale order status to be com
-
Monitor Flickers when waking up
Whenever my unit wakes back up from sleeping, the display will come on, go off for 1-2 seconds, and come back on. This just started happening in the past week. I've had it for about 3 months now and I keep it on almost all the time, but it's sleeping
-
I have given my Ipod to my partner and it is not being recognised on his PC. Can someone let me know how to transfer it to new owner?
-
How to customize aniview of srm 4.0 to suitmy needs
Please help me with this issue- how to customize an iview of srm 4.0 to suitmy needs? in which language - abap/web dynpro java has the iviewsof srm 4.0 been develpoed?
-
I was wondering what this process is. It appears to be started whenever I run X11 and is run as root. From the name, it sounds kind of fishy to me, and I don't see any documentation about it on the net. Does anyone know anything about it? Also, I'm n