Steps for System Refresh for ABAP + JAVA stack

Hi friends,
I am newbie to SAP BASIS adminstration. There is a system refresh activity planned shortly.
Can someome pls let me know the steps for system refresh of ABAP  + JAVA stack??
regards,
Ambarish.

Please check [systemcopy@SDN|System Copy and Migration] and [guides|http://service.sap.com/instguidesnw] according to your release.

Similar Messages

  • System refresh of abap+java

    Hi gurus,
    I am trying to do the system refresh for ecc6.0 abap + java .I did the abap part with the oracle specific method where we restore the data files and run the control.sql command . But for the java part i am confused on what option i had tried to select abapJava and do an export and then when i am importing it with the abapJava option it is also doing the restoration of abap stack . If i select only java it is trying to create a instance JC00 which i dont want , Is there a method where i can only export the java stack and import into the abap system that was refreshed using the oracle restore method ?
    Thanks in advance

    try following this:
    JAVA Refresh Procedure On SRC system
    1) Execute the following command after navigating to the SAPinst directory to the JAVA export using SAPinst.
    a. sapinst.exe product_cp.catalog
    The export procedure is as follows
    1) Specify the SID name and export directory
    2) To take the export without stopping the JAVA process, uncheck the check box
    On TRG System Preparations
    1) Copy the export from the SRC export directory to the TRG system
    2) The JAVA versions should be same on SRC and TRG
    Import procedure is as follows
    Execute the following command on the TRG system after navigating to the SAPinst in the Master DVD
    sapinst.exe product_cp.catalog
    Check for the TRG system SID for example TAJ
    Note:
    1) Ensure that the SAP system is up and running.
    2) Ensure that temporary tablespace u201CPSAPTEMPu201D is not empty
    After completing the import successfully, restart the SAP system.
    Rohit

  • Homogeneous System copy of ABAP+JAVA stack ( PI )

    Hi everyone,
    I am planing to do Homogeneous system copy of our existing NW 7.0 SR3 PI System ( ABAP + JAVA).
    Can anyone help me with step by step details to do in source system and target system?
    Thanks..

    Hi,
    You should follow the system copy guide for the different option while doing the system copy
    - database dependent
    - R3load based (export/import)
    The following document you can use as a reference, (note -this has been done on database dependent method)
    https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/f055cbd0-97f1-2a10-c09a-907b811de000
    Regards,
    Debasis

  • Error during Homogenous System copy of ABAP+JAVA stack

    Hi All,
    I'm trying to do a homogeneous system copy of an XI system NW04s on Windows 2k3 and Oracle database to another windows 2k3 machine. SCS and Database went on fine but during CI installation on the target system I'm stuck at "Run ABAP Reports" phase.
    I'm getting an error:
    MUT-03025 Caught ERfcExcept in Modulecall: Exception condition "WRITE_FAILED" raised..
    runRADDBDIF was executed with status ERROR
    The ABAP stack is however up and when I login to 000 client using DDIC user and try to execute the report RADDBDIF, I get a runtime error RAISE_EXCEPTION with Exception condition "WRITE_FAILED" raised.
    A RAISE statement in the program "SAPLSUGI" raised the exception condition "WRITE_FAILED".
    If anyone has encountered similar problem, kindly help me.
    Regards,
    Sameer

    Hi Juan,
    I've already checked dev_disp and dev_ms but didn't find any errors. However, I got some errors in dev_w0. I'm pasting the same for your reference.
    trc file: "dev_w0", trc level: 1, release: "700"
    ACTIVE TRACE LEVEL           1
    ACTIVE TRACE COMPONENTS      all, MJ
    B 
    B Mon Jan 07 18:45:15 2008
    B  create_con (con_name=R/3)
    B  Loading DB library 'F:\usr\sap\COP\DVEBMGS04\exe\dboraslib.dll' ...
    B  Library 'F:\usr\sap\COP\DVEBMGS04\exe\dboraslib.dll' loaded
    B  Version of 'F:\usr\sap\COP\DVEBMGS04\exe\dboraslib.dll' is "700.08", patchlevel (0.107)
    B  New connection 0 created
    M sysno      04
    M sid        COP
    M systemid   560 (PC with Windows NT)
    M relno      7000
    M patchlevel 0
    M patchno    111
    M intno      20050900
    M make:      multithreaded, Unicode, optimized
    M pid        2148
    M
    M  kernel runs with dp version 229000(ext=109000) (@(#) DPLIB-INT-VERSION-229000-UC)
    M  length of sys_adm_ext is 576 bytes
    M  ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 2148) [dpxxdisp.c   1301]
    I  MtxInit: 30000 0 0
    M  DpSysAdmExtCreate: ABAP is active
    M  DpSysAdmExtCreate: VMC (JAVA VM in WP) is not active
    M 
    M Mon Jan 07 18:45:16 2008
    M  DpShMCreate: sizeof(wp_adm)          10056     (1436)
    M  DpShMCreate: sizeof(tm_adm)          4232256     (21056)
    M  DpShMCreate: sizeof(wp_ca_adm)          24000     (80)
    M  DpShMCreate: sizeof(appc_ca_adm)     8000     (80)
    M  DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528056/528064
    M  DpShMCreate: sizeof(comm_adm)          528064     (1048)
    M  DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
    M  DpShMCreate: sizeof(slock_adm)          0     (96)
    M  DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
    M  DpShMCreate: sizeof(file_adm)          0     (72)
    M  DpShMCreate: sizeof(vmc_adm)          0     (1536)
    M  DpShMCreate: sizeof(wall_adm)          (38456/34360/64/184)
    M  DpShMCreate: sizeof(gw_adm)     48
    M  DpShMCreate: SHM_DP_ADM_KEY          (addr: 05EC0040, size: 4883696)
    M  DpShMCreate: allocated sys_adm at 05EC0040
    M  DpShMCreate: allocated wp_adm at 05EC2090
    M  DpShMCreate: allocated tm_adm_list at 05EC47D8
    M  DpShMCreate: allocated tm_adm at 05EC4808
    M  DpShMCreate: allocated wp_ca_adm at 062CDC48
    M  DpShMCreate: allocated appc_ca_adm at 062D3A08
    M  DpShMCreate: allocated comm_adm at 062D5948
    M  DpShMCreate: system runs without slock table
    M  DpShMCreate: system runs without file table
    M  DpShMCreate: allocated vmc_adm_list at 06356808
    M  DpShMCreate: allocated gw_adm at 06356848
    M  DpShMCreate: system runs without vmc_adm
    M  DpShMCreate: allocated ca_info at 06356878
    M  DpShMCreate: allocated wall_adm at 06356880
    X  EmInit: MmSetImplementation( 2 ).
    X  MM global diagnostic options set: 0
    X  <ES> client 0 initializing ....
    X  Using implementation view
    X  <EsNT> Using memory model view.
    M  <EsNT> Memory Reset disabled as NT default
    X  ES initialized.
    M  ThInit: running on host hydhtc24738
    M  calling db_connect ...
    C  Prepending F:\usr\sap\COP\DVEBMGS04\exe to Path.
    C 
    C Mon Jan 07 18:45:18 2008
    C  Oracle Client Version: '10.2.0.1.0'
    C  Client NLS settings: AMERICAN_AMERICA.UTF8
    C  Logon as OPS$-user to get SAPSR3's password
    C  Connecting as /@COP on connection 0 (nls_hdl 0) ... (dbsl 700 250407)
    C  Nls CharacterSet                 NationalCharSet              C      EnvHp      ErrHp ErrHpBatch
    C    0 UTF8                                                      1   0649D5C8   064A2B64   064A23EC
    C  Attaching to DB Server COP (con_hdl=0,svchp=064A2338,srvhp=064B3F34)
    C  Starting user session (con_hdl=0,svchp=064A2338,srvhp=064B3F34,usrhp=064FFA98)
    C  Now '/@COP' is connected (con_hdl 0, nls_hdl 0).
    C  Got SAPSR3's password from OPS$-user
    C  Disconnecting from connection 0 ...
    C  Closing user session (con_hdl=0,svchp=064A2338,usrhp=064FFA98)
    C  Now I'm disconnected from ORACLE
    C  Connecting as SAPSR3/<pwd>@COP on connection 0 (nls_hdl 0) ... (dbsl 700 250407)
    C  Nls CharacterSet                 NationalCharSet              C      EnvHp      ErrHp ErrHpBatch
    C    0 UTF8                                                      1   0649D5C8   064A2B64   064A23EC
    C  Starting user session (con_hdl=0,svchp=064A2338,srvhp=064B3F34,usrhp=064FFA98)
    C  Now 'SAPSR3/<pwd>@COP' is connected (con_hdl 0, nls_hdl 0).
    C  Database NLS settings: AMERICAN_AMERICA.UTF8
    C  DB instance COP is running on HYDHTC24738 with ORACLE version 10.2.0.1.0 since JAN 07, 2008, 15:34:24
    B  Connection 0 opened (DBSL handle 0)
    B  Wp  Hdl ConName          ConId     ConState     TX  PRM RCT TIM MAX OPT Date     Time   DBHost         
    B  000 000 R/3              000000000 ACTIVE       NO  YES NO  000 255 255 20080107 184516 HYDHTC24738    
    M  db_connect o.k.
    M  ICT: exclude compression: .zip,.cs,.rar,.arj,.z,.gz,.tar,.lzh,.cab,.hqx,.ace,.jar,.ear,.war,.css,.pdf,.js,.gzip,.uue,.bz2,.iso,.sda,.sar,.gif
    I 
    I Mon Jan 07 18:45:22 2008
    I  MtxInit: 0 0 0
    M  SHM_PRES_BUF               (addr: 0AB50040, size: 4400000)
    M  SHM_ROLL_AREA          (addr: 788A0040, size: 61440000)
    M  SHM_PAGING_AREA          (addr: 0AF90040, size: 32768000)
    M  SHM_ROLL_ADM               (addr: 0CEE0040, size: 615040)
    M  SHM_PAGING_ADM          (addr: 0CF80040, size: 525344)
    M  ThCreateNoBuffer          allocated 544152 bytes for 1000 entries at 0D010040
    M  ThCreateNoBuffer          index size: 3000 elems
    M  ThCreateVBAdm          allocated 12160 bytes (50 server) at 0D0A0040
    X  EmInit: MmSetImplementation( 2 ).
    X  MM global diagnostic options set: 0
    X  <ES> client 0 initializing ....
    X  Using implementation view
    X  ES initialized.
    B  db_con_shm_ini:  WP_ID = 0, WP_CNT = 7, CON_ID = -1
    B  dbtbxbuf: Buffer TABL  (addr: 10CD00C8, size: 30000000, end: 1296C448)
    B  dbtbxbuf: Buffer TABLP (addr: 129700C8, size: 10240000, end: 133340C8)
    B  dbexpbuf: Buffer EIBUF (addr: 133400D0, size: 4194304, end: 137400D0)
    B  dbexpbuf: Buffer ESM   (addr: 137500D0, size: 4194304, end: 13B500D0)
    B  dbexpbuf: Buffer CUA   (addr: 13B600D0, size: 3072000, end: 13E4E0D0)
    B  dbexpbuf: Buffer OTR   (addr: 13E500D0, size: 4194304, end: 142500D0)
    M 
    M Mon Jan 07 18:45:23 2008
    M  CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
    S 
    S Mon Jan 07 18:45:26 2008
    S  *** init spool environment
    S  initialize debug system
    T  Stack direction is downwards.
    T  debug control: prepare exclude for printer trace
    T  new memory block 1965E820
    S 
    S Mon Jan 07 18:45:27 2008
    S  spool kernel/ddic check: Ok
    S  using table TSP02FX for frontend printing
    S  1 spool work process(es) found
    S  frontend print via spool service enabled
    S  printer list size is 150
    S  printer type list size is 50
    S  queue size (profile)   = 300
    S  hostspool list size = 3000
    S  option list size is 30
    S      found processing queue enabled
    S  found spool memory service RSPO-RCLOCKS at 1D8C00A8
    S  doing lock recovery
    S  setting server cache root
    S  found spool memory service RSPO-SERVERCACHE at 1D8C02B0
    S    using messages for server info
    S  size of spec char cache entry: 297028 bytes (timeout 100 sec)
    S  size of open spool request entry: 2236 bytes
    S  immediate print option for implicitely closed spool requests is disabled
    A 
    A  -PXA--
    A  PXA INITIALIZATION
    A  System page size: 4kb, total admin_size: 4888kb, dir_size: 4856kb.
    A  Attached to PXA (address 688A0040, size 150000K)
    A  abap/pxa = shared protect gen_remote
    A  PXA INITIALIZATION FINISHED
    A  -PXA--
    A 
    A  ABAP ShmAdm attached (addr=57A1C000 leng=20955136 end=58E18000)
    A  >> Shm MMADM area (addr=57E91D98 leng=126176 end=57EB0A78)
    A  >> Shm MMDAT area (addr=57EB1000 leng=16150528 end=58E18000)
    A  RFC Destination> destination hydhtc24738_COP_04 host hydhtc24738 system COP systnr 4 (hydhtc24738_COP_04)
    A  RFC Options> H=hydhtc24738,S=04,d=2,
    A  RFC FRFC> fallback activ but this is not a central instance.
    A   
    A  RFC rfc/signon_error_log = -1
    A  RFC rfc/dump_connection_info = 0
    A  RFC rfc/dump_client_info = 0
    A  RFC rfc/cp_convert/ignore_error = 1
    A  RFC rfc/cp_convert/conversion_char = 23
    A  RFC rfc/wan_compress/threshold = 251
    A  RFC rfc/recorder_pcs not set, use defaule value: 2
    A  RFC rfc/delta_trc_level not set, use default value: 0
    A  RFC rfc/no_uuid_check not set, use default value: 0
    A  RFC rfc/bc_ignore_thcmaccp_retcode not set, use default value: 0
    A  RFC Method> initialize RemObjDriver for ABAP Objects
    M  ThrCreateShObjects          allocated 7406 bytes at 0FFB0040
    N  SsfSapSecin: putenv(SECUDIR=F:\usr\sap\COP\DVEBMGS04\sec): ok
    N 
    N  =================================================
    N  === SSF INITIALIZATION:
    N  ===...SSF Security Toolkit name SAPSECULIB .
    N  ===...SSF trace level is 0 .
    N  ===...SSF library is F:\usr\sap\COP\DVEBMGS04\exe\sapsecu.dll .
    N  ===...SSF hash algorithm is SHA1 .
    N  ===...SSF symmetric encryption algorithm is DES-CBC .
    N  ===...sucessfully completed.
    N  =================================================
    N 
    N Mon Jan 07 18:45:28 2008
    N  MskiInitLogonTicketCacheHandle: Logon Ticket cache pointer retrieved from shared memory.
    N  MskiInitLogonTicketCacheHandle: Workprocess runs with Logon Ticket cache.
    M  JrfcVmcRegisterNativesDriver o.k.
    W  =================================================
    W  === ipl_Init() called
    B    dbtran INFO (init_connection '<DEFAULT>' [ORACLE:700.08]):
    B     max_blocking_factor =   5,  max_in_blocking_factor      =   5,
    B     min_blocking_factor =   5,  min_in_blocking_factor      =   5,
    B     prefer_union_all    =   0,  prefer_join                 =   0,
    B     prefer_fix_blocking =   0,  prefer_in_itab_opt          =   1,
    B     convert AVG         =   0,  alias table FUPD            =   0,
    B     escape_as_literal   =   1,  opt GE LE to BETWEEN        =   0,
    B     select *            =0x0f,  character encoding          = STD / <none>:-,
    B     use_hints           = abap->1, dbif->0x1, upto->2147483647, rule_in->0,
    B                           rule_fae->0, concat_fae->0, concat_fae_or->0
    W    ITS Plugin: Path dw_gui
    W    ITS Plugin: Description ITS Plugin - ITS rendering DLL
    W    ITS Plugin: sizeof(SAP_UC) 2
    W    ITS Plugin: Release: 700, [7000.0.111.20050900]
    W    ITS Plugin: Int.version, [33]
    W    ITS Plugin: Feature set: [14]
    W    ===... Calling itsp_Init in external dll ===>
    W  === ipl_Init() returns 0, ITSPE_OK: OK
    W  =================================================
    E  Enqueue Info: rdisp/wp_no_enq=1, rdisp/enqname=<empty>, assume hydhtc24738_COP_04
    E  Replication is disabled
    E  EnqCcInitialize: local lock table initialization o.k.
    E  EnqId_SuppressIpc: local EnqId initialization o.k.
    E  EnqCcInitialize: local enqueue client init o.k.
    M  MBUF info for hooks: MS component UP
    M  ThSetEnqName: set enqname by server list
    M  ThISetEnqname: enq name = >hydhtc24738_COP_04                      <
    E 
    E  *************** EnqId_EN_ActionAtMsUpHook ***************
    E  Hook on upcoming Ms (with EnqSrv), get auth EnqId and check it locally
    E 
    E  *************** ObjShMem_CheckAuthoritativeEnqId ***************
    E  Checking authoritative EnqId from EnqSrv into ObjShMem
    E  ObjShMem_CheckAuthoritativeEnqId: ObjShMem ...
    E  EnqId.EnqTabCreaTime    = -999
    E  EnqId.RandomNumber      = -999
    E  ReqOrd.TimeInSecs       = -999
    E  ReqOrd.ReqNumberThisSec = -999
    E  ObjShMem_CheckAuthoritativeEnqId: ObjShMem ...
    E  EnqId.EnqTabCreaTime    = -999
    E  EnqId.RandomNumber      = -999
    E  ReqOrd.TimeInSecs       = -999
    E  ReqOrd.ReqNumberThisSec = -999
    E  ObjShMem_CheckAuthoritativeEnqId: EnqId is initial in ShMem
    E  ObjShMem_CheckAuthoritativeEnqId: Overwrite incoming auth EnqId, continue
    E  EnqId inscribed into initial ObjShMem: (ObjShMem_CheckAuthoritativeEnqId)
    E  -SHMEM--
    E  EnqId:          EnqTabCreaTime/RandomNumber    = 07.01.2008 18:45:27  1199711727 / 1692
    E  ReqOrd at Srv:  TimeInSecs/ReqNumberThisSec    = 07.01.2008 18:45:28  1199711728 / 1
    E  ReqOrd at Cli:  TimeInSecs/ReqNumberThisSec    = 07.01.2008 18:45:28  1199711728 / 1
    E  Status:         STATUS_OK
    E  -
    M  ThActivateServer: state = STARTING
    L  BtcSysStartRaise: Begin
    L  Raise event SAP_SYSTEM_START with parameter <hydhtc24738_COP_04  >
    L  BtcSysStartRaise: End
    S 
    S Mon Jan 07 18:45:36 2008
    S  server @>SSRV:hydhtc24738_COP_04@< appears or changes (state 1)
    M  SecAudit(RsauShmInit): WP attached to existing shared memory.
    M  SecAudit(RsauShmInit): addr of SCSA........... = 05E90040
    M  SecAudit(RsauShmInit): addr of RSAUSHM........ = 05E907A8
    M  SecAudit(RsauShmInit): addr of RSAUSLOTINFO... = 05E907E0
    M  SecAudit(RsauShmInit): addr of RSAUSLOTS...... = 05E907EC
    S 
    S Mon Jan 07 18:45:44 2008
    S  server @>SSRV:hydhtc24738_COP_04@< appears or changes (state 1)
    B 
    B Mon Jan 07 18:47:27 2008
    B  dbmyclu : info : my major identification is 3244494858, minor one 4.
    B  dbmyclu : info : Time Reference is 1.12.2001 00:00:00h GMT.
    B  dbmyclu : info : my initial uuid is DCBD22E36FC346F1BF890002E339BE1E.
    B  dbmyclu : info : current optimistic cluster level: 0
    B  dbmyclu : info : pessimistic reads set to 2.
    A 
    A Mon Jan 07 18:47:55 2008
    A  TH VERBOSE LEVEL FULL
    A  ** RABAX: level LEV_RX_PXA_RELEASE_MTX entered.
    A  ** RABAX: level LEV_RX_PXA_RELEASE_MTX completed.
    A  ** RABAX: level LEV_RX_COVERAGE_ANALYSER entered.
    A  ** RABAX: level LEV_RX_COVERAGE_ANALYSER completed.
    A  ** RABAX: level LEV_RX_ROLLBACK entered.
    A  ** RABAX: level LEV_RX_ROLLBACK completed.
    A  ** RABAX: level LEV_RX_DB_ALIVE entered.
    A  ** RABAX: level LEV_RX_DB_ALIVE completed.
    A  ** RABAX: level LEV_RX_HOOKS entered.
    A  ** RABAX: level LEV_RX_HOOKS completed.
    A  ** RABAX: level LEV_RX_STANDARD entered.
    A  ** RABAX: level LEV_RX_STANDARD completed.
    A  ** RABAX: level LEV_RX_STOR_VALUES entered.
    A  ** RABAX: level LEV_RX_STOR_VALUES completed.
    A  ** RABAX: level LEV_RX_C_STACK entered.
    A 
    A Mon Jan 07 18:48:02 2008
    A  ** RABAX: level LEV_RX_C_STACK completed.
    A  ** RABAX: level LEV_RX_MEMO_CHECK entered.
    A  ** RABAX: level LEV_RX_MEMO_CHECK completed.
    A  ** RABAX: level LEV_RX_AFTER_MEMO_CHECK entered.
    A  ** RABAX: level LEV_RX_AFTER_MEMO_CHECK completed.
    A  ** RABAX: level LEV_RX_INTERFACES entered.
    A  ** RABAX: level LEV_RX_INTERFACES completed.
    A  ** RABAX: level LEV_RX_GET_MESS entered.
    A  ** RABAX: level LEV_RX_GET_MESS completed.
    A  ** RABAX: level LEV_RX_INIT_SNAP entered.
    A  ** RABAX: level LEV_RX_INIT_SNAP completed.
    A  ** RABAX: level LEV_RX_WRITE_SYSLOG entered.
    A  ** RABAX: level LEV_RX_WRITE_SYSLOG completed.
    A  ** RABAX: level LEV_RX_WRITE_SNAP entered.
    A 
    A Mon Jan 07 18:48:03 2008
    A  ** RABAX: level LEV_SN_END completed.
    A  ** RABAX: level LEV_RX_SET_ALERT entered.
    A 
    A Mon Jan 07 18:48:04 2008
    A  ** RABAX: level LEV_RX_SET_ALERT completed.
    A  ** RABAX: level LEV_RX_COMMIT entered.
    A  ** RABAX: level LEV_RX_COMMIT completed.
    A  ** RABAX: level LEV_RX_SNAP_SYSLOG entered.
    A  ** RABAX: level LEV_RX_SNAP_SYSLOG completed.
    A  ** RABAX: level LEV_RX_RESET_PROGS entered.
    A  ** RABAX: level LEV_RX_RESET_PROGS completed.
    A  ** RABAX: level LEV_RX_STDERR entered.
    A  Mon Jan 07 18:48:04 2008
    A 
    A  ABAP Program SAPLSUGI                                .
    A  Source LSUGIU08                                 Line 77.
    A  Error Code RAISE_EXCEPTION.
    A  Module  $Id: //bas/700_REL/src/krn/runt/abfunc.c#10 $ SAP.
    A  Function ab_jfune Line 2561.
    A  ** RABAX: level LEV_RX_STDERR completed.
    A  ** RABAX: level LEV_RX_RFC_ERROR entered.
    A  ** RABAX: level LEV_RX_RFC_ERROR completed.
    A  ** RABAX: level LEV_RX_RFC_CLOSE entered.
    A  ** RABAX: level LEV_RX_RFC_CLOSE completed.
    A  ** RABAX: level LEV_RX_IMC_ERROR entered.
    A  ** RABAX: level LEV_RX_IMC_ERROR completed.
    A  ** RABAX: level LEV_RX_DATASET_CLOSE entered.
    A  ** RABAX: level LEV_RX_DATASET_CLOSE completed.
    A  ** RABAX: level LEV_RX_RESET_SHMLOCKS entered.
    A  ** RABAX: level LEV_RX_RESET_SHMLOCKS completed.
    A  ** RABAX: level LEV_RX_ERROR_SAVE entered.
    A  ** RABAX: level LEV_RX_ERROR_SAVE completed.
    A  ** RABAX: level LEV_RX_ERROR_TPDA entered.
    A  ** RABAX: level LEV_RX_ERROR_TPDA completed.
    A  ** RABAX: level LEV_RX_PXA_RELEASE_RUDI entered.
    A  ** RABAX: level LEV_RX_PXA_RELEASE_RUDI completed.
    A  ** RABAX: level LEV_RX_LIVE_CACHE_CLEANUP entered.
    A  ** RABAX: level LEV_RX_LIVE_CACHE_CLEANUP completed.
    A  ** RABAX: level LEV_RX_END entered.
    A  ** RABAX: level LEV_RX_END completed.
    A  ** RABAX: end no http/smtp
    A  ** RABAX: end RX_GOTO_RABAX
    A  Exception condition "WRITE_FAILED" raised..
    A 
    S 
    S Mon Jan 07 18:53:35 2008
    S  found spool memory service RSPO-ACTIONS at 1D8C9978
    B 
    B Mon Jan 07 20:31:35 2008
    B  table logging switched off for all clients
    Regards,
    Sameer

  • System Copy from ABAP Stack to ABAP+Java Stack

    Hi,
    Is it possible to system copy (homogeneous or heterogeneous) from a system based on ABAP Stack to a system based on ABAP+Java Stack? Is it the normal system copy procedure or something aditional is required to do. Pl. advise. Thanks
    regards
    Edited by: Abdus Samad on Oct 24, 2008 8:13 AM

    It depends on what you want to copy, a system copy will always wipe out the existing target. But if you want to only copy data, you might be able to do a client copy. You can start with this SAP note: [552711 - FAQ: Client copy|https://service.sap.com/sap/bc/bsp/spn/sapnotes/index2.htm?numm=552711]
    Regards Michael

  • System Refresh: Abap+Java stack

    Have a few questions about CRM refresh I'm working on. Done many refreshes over the years and the new process has me shaking my head in disbelief.
    Performed a normal system refresh, by restoring online backup of production system onto mirror system. The mirror system exactly matches my production sytem (Oracle 10g, SuSE Linux 64 bit, UNICODE). 
    Now my system is running from Abap stack perspective, however Java components fail to load.
    Now from reading the documentation (System Copy for SAP, Based on SAP Netweaver 2004s Abap+Java) it appears that I have to use sapinst and no longer use online database backups for system refreshes.
    Is this the case? Has the investment my organization made into online backups now worthless?
    Is there a way to take the java schema in this online copied database and bring it online after converting it to work on the mirror landscape?
    Or should I throw out our system methodology and start new

    Thank you for the reply.
    Reading SAP's documentation seems to imply that I need to extract out the java schema from my production source and then re-install on my QA target to make a refresh of the java stack possible.
    However, if I have a complete copy of my source system database working on the target, why is the extract necessary?
    At least, I should be able to extract out the contents from the source as if it was the target, thereby eliminating any sort of production outages (we have many constraints about shutting down production from fuctional perspective).
    I'll do some research around the other tools mentioned to see if they can lend a hand fixing the issue,

  • ABAP / Java stack refresh

    Does anyone have documentation on how to do a refresh for an ABAP / Java system?  I've done a system copy to create a new system with SAVLIB/RSTLIB by:
    Export the SDM
    Saved ABAP Database
    Saved Java Database
    Run the system copy with RSTLIB option on the target system, but when I did this, the system didn't already exist on the target side.
    But if I have a development system (say abc) and want to refresh it with production (xyz), how would I do this with the addition of a java stack? 
    We have documentation and have done this plenty with just an ABAP stack, but not so with an ABAP/JAVA stack.
    I would think if I tried to use the system copy method mentioned above it would error because the target system (abc) already exists.
    Can anyone clarify for me?  Thank you.
    ~TJ

    Hi TJ.
    Looks like your question is not specific for SAP on System i. Most likely you get more answers when you ask it in an platform independent forum. I would suggest the SAP NetWeaver Application Server forum.
    But I think it would be very interesting for many of us here in this forum to let us know if there is a easy way to accomplish the refresh.
    Best regrads,
    Jan

  • System refresh for solution manager

    Hi All,
    Do you think its possible to do a system refresh for solution manager?
    Even though we do, wont there be a lot of inconsistencies between satellite system and with new solution manager?
    Ideally i need do system refresh of X solution manager to Y solution manager
    Thanks
    Gopal

    Hi,
    How about the consistency between your two X and Y systems. Are they in single TMS. Requests properly transported from X to Y? If its positive, then go ahead you can make System Refresh..
    Feel free to revert back.
    --Ragu

  • SAP ECC 6.0 EHP4 installation with ABAP+JAVA stack

    Hi,
    I need to install SAP ECC6.0 EHP4 with ABAP+JAVA stack on windiws server 2008 with oracle.
    I have read that for this, we need to install ECC 6.0 EHP4 ready and then upgrade to EHP4 using ehpi installer.
    I have found the documents seperately for ABAP and JAVA stack and not for ABAP+JAVA.
    I need clarifications on these.
    1.Do we need to install ABAP and JAVA instances seperately with EHP4 and then upgrade(In that case I have to install both instances on single host)?
    2.Should we give seperate <SID> for both instances and create seperate databases?
    3.Hard disk requirement for this set up.(We have 150 GB including C drive)
    4.Steps to perform after installing ECC6.0 EHP4 ready
    5.Please send me the doc. if anyone has
    Anyhelp would be highly appreciated.
    Regards,
    Surya

    > 1.In the installation document for EHP4 ready for SAP ERP 6.0 ABAP.It is mentioned that this installation contains only basic EHP4 for ERP 6.0 and we need to install additional EHP4  functionality in the SAP ERP 6.0 -EHP4 ready system.
    > It states that atleast Support pacakge stack (SPS) 1 of SHP4 needs to be installed.So If I install this stack using EHPi installer in the post installation activities my SAP ERP 6.0 EHP4 will be in place?Please confirm.
    Yes..
    >
    > 2.Can I install SAP SR3 with dual stack and upgaradte it directly to EHP4 at a time?
    Yes you can do it.....as SAP still supports dual stack ERP systems to EHP4
    >
    > Any solutions or suggestions from others also welcome.
    Why do u want a dual stack ECC ystem?? any specific requirement???
    Regards,
    Nirmal.K
    Edited by: nirmal konchada on Feb 2, 2011 12:16 PM

  • Whats the difference between ABAP stack, ABAP+Java stack and Java stack

    Hello,
    I have a nagging doubt about the difference between the ABAP stack, ABAP+Java stack & the Java only stack. I believe that the method of applying the kernel for all the 3 types is different.
    Also can we apply the ABAP support packs through JSPM.
    Please put some light on this.
    Thank you

    Hi Zaheer
    ABAP Stack
    AS ABAP is used to provide the ABAP foundation of SAP NetWeaver.
    Part of AS ABAP is the Search Engine Service (SES), which enables users to search for
    business objects using Search and Classification (TREX). SES accesses Search and
    Classification (TREX) functions through the Search and Classification (TREX) ABAP
    client. SES replicates the business objects from the ABAP application to Search and
    Classification (TREX), so that it can apply Search and Classification (TREX) search
    functions to them. When a user enters a search query, the Search and Classification
    (TREX) system responds to it, not the database for the ABAP application. For more
    information, see the document Installation Guide – SAP NetWeaver TREX Single Hosts /
    Multiple Host.
    Java stack
    AS Java is used to provide the Java foundation of SAP NetWeaver. Among the key
    capabilities of AS Java are:
    • J2EE Engine – a J2EE 1.3-compliant application server for running enterprise
    applications. In addition to the pure J2EE standard technologies, the J2EE
    Engine implements complementary technologies, such as Web Dynpro or Web
    Services, that are targeted at supporting large-scale, real-business application
    development projects.
    • SAP Composite Application Framework Core (CAF Core) is a service-oriented
    architecture for building and deploying composite applications. It enables
    modeling of different service types – entity services that represent a domain
    model, application services that implement business logic, and external
    services that offer connectivity to back-end services by means of remote
    function calls (RFCs) or Web services. Usage type AS Java comprises the CAF
    Core runtime environment, while design time tools are part of the SAP
    NetWeaver Developer Studio.
    • Web Dynpro is the user interface technology for developing professional
    business applications for mobile as well as for desktop clients. Web Dynpro
    applications can easily be integrated into SAP NetWeaver Enterprise Portal,
    providing a unified layout for the end user as well as enhanced navigation
    support. Web Dynpro also allows, for example, the development of interactive
    forms using the Adobe document services.
    • Adobe document services is a set of runtime services that provide a range of
    form and document creation and manipulation functions such as:
    • Converting XML form templates (created using Adobe LiveCycle Designer)
    to PDF and various print formats
    • Setting Adobe Reader rights to enable users to fill in and annotate forms,
    save and print them locally, and include digital signatures for authentication
    using the free Adobe Reader software
    Extracting data from SAP applications into Interactive Forms and transferring form data
    back into SAP applications using XML
    ABAP + Java Stack
    Contains both functionalities.
    I hope this helps
    Regards
    Chen

  • Test Activities in BW after ABAP /JAVA Stack Split

    Hi All,
    We have recently EHP upgrade in our system .Now to improve performance we have done ABAP/JAVA stack split .
    1.Can you please suggest what are the test activities should be done from BW side after upgrade ?
    2.Can you explain what issue we might face ?
    Please provide list of checks need to be performed specific to this split .
    Thanks in advance .
    Regards,
    Jaya Tiwari

    jaya tiwari wrote:
    Hi All,
    >
    > We have recently EHP upgrade in our system .Now to improve performance we have done ABAP/JAVA stack split .
    > 1.Can you please suggest what are the test activities should be done from BW side after upgrade ?
    > 2.Can you explain what issue we might face ?
    > Please provide list of checks need to be performed specific to this split .
    >
    > Thanks in advance .
    >
    > Regards,
    > Jaya Tiwari
    There are no standard issues in this split. Only thing you need to do is integration testing for scenario like SSO, Bex Reports etc.
    Thanks
    Sunny

  • License Problem in Abap+java stack

    Hello,
    I have installed my SAP XI/PI System with ABAP+JAVA Stack.
    I have applied SAP license at ABAP Stack using slicense for web as abap+java, so is there any need to apply license again for java stack, because when i am checking in Visual Admin under license node , it is showing license is not installed.
    If it is not required then why it is showing in Visual Admin tool that license is not installed. can some one give me guidance on this issue.
    Best Regards,
    V.Singh

    Hi,
    No restart will not make any difference.
    You can overlook this. If in the /nslicense screen you see a permanent license, then no need to worry furthur..
    Also in the system info page , you will see:
    Software Product  :Days Until Expiry 
    Hope this helps.
    Kind regards,
    hemanth

  • Syncronization  of ABAP+java  stack  during the upgrade.

    Hi All,
    We have successfully upgraded our BWD & BWQ which is ABAP+JAVA stack .
    we have followed the process of uninstalling the java stack and removing the j2ee and SDM folder and starting the system for the upgrade.
    Tomorrow we are going to start BWP , i found the way to syncronize the upgrade in upgrade manual like starting the SAPjup when upgrade asks for syncronization.
    Can any one suggest me the process of starting the SAPjup for sync like already upgrade is running with SAPup and just waiting for SAPjup to sync it's just a norwal way of starting the SAPjup ? or anything.
    But i am thinking to go in normal what we followed for the BWD&BWQ.
    Please suggest...
    Thanks,
    Subhash.G

    PLease proceed with your old strategy it sounds better.
    Regards,
    iqbal

  • Abap+java stack

    Hi,
      My sap is running on ecc6.0,linux with maxdb(abap+javastack) we are  taking backup  through database manager in tape.while restoring it will ask any java files.
    Thanku

    Hi
    Thanks alot for ur quick response.
    If I want to follow SAP System copy(export/import) procedure using sapinst tool , I need to shut it down the SAP instance , which is not possible everyday.
    Is there any way out to take backup of ABAP+JAVA stack  to tape and restore in another machine using last sucessfull backup  using backup/restore procedure(Database Manager).
    How can I take backup of ABAP+JAVA stack without shuting down the SAP Instance by using any sap standard tools (sapinst) and can be used to restore in any new machine in case of emergency?
    ThankU

  • Abap+ java stack or Abap stack

    Hi All,
    How to know whether a system is  ABAP+ JAVA   stack or  JAVA stack.
    In our system   EP6.0  which is JAVA  stack  holds JC00 which is a  java instance direcory. In BW system we have SCS20 and Dvebg...00 directories is it ABAP+ JAVA stack  or  ABAP stack with J2ee engine services.
    Please suggest me...
    Thanks,
    Subhash.G

    In the forder structuer usr\sap\<SID> if you have DVEBMGS<XX> then it's ABAP and if it's JC<XX>, then it's JAVA. Also if under DVEBMGS<XX> you have j2ee and SDM folder then it's a dual stack that is both ABAP and JAVA.
    As for the URL if it's a dual stack then using the browser use the user j2ee_admin and the specified password, else if it is only java then use administrator user and the specified password.
    If it's a dual stack you can also login using sapgui.
    If in case its single stack AS_ABAP
    THere will one be a single node i.e. no message server and enque server. The folder stur would be /usr./sap/<SID>/ and tou would find
    DVEBMG SYS folders only.
    IF in case its single stack Java server then
    In mmc. you will find, 2 nodes one for message server, enque server and the other for the SDM, dispatcher and server0
    the foder struct would be
    /usr/sap/<SID?
    JC><CIno> SCS<no>
    Now in case if you have double stack i.e. AS-java and AS-ABAP you would will find these things in mmc
    Message server and enque server
    disp+work, message server and wp
    the folder struct would be
    /usr/sap/<SID>/
    DVEBMG<no> SCS<no>

Maybe you are looking for