Steps for transferring data to extra tab fields

Hi,
I have to populate target days from range of coverage to extra tab field. What are the steps I need to follow?
First I need to use the FM EXIT_SAPLCMAT_001 to get the value on R/3 side and send to APO
I think I need to create a file and give a name for that in APO product master Extra tab.
I know how to do the first part then I don't have any idea on how to proceed after that.
I would appreciate any help.
Thanks.

I found the procedure myself.
Here it is:
1. Create a project in CMOD for the user exit FM EXIT_SAPLCMAT_001
2. Enter your coding to populate the field one of the fields AT01 to 05 in the table CT_CIF_MATLOC-AT10X ( X being on of 1 to 5)
3. In APO, maintain the field names in SPRO>APO>Master data>Maintain Freely definable attributes for the field AT10X as Your required text here.
When the material is CIFed from R/3 to APO, it is filled in the field Your required text here.

Similar Messages

TS1314 can you write the steps for transferring photos from my pc to ipad2

Can you please write down the steps for transferring photos from my PC to IPAD2?

Sync photos to iPad
http://support.apple.com/kb/HT4236

Business scenairo for transfering data from Non Sourace system.

Hi everyone,
i am looking for sample business scenario for transferring data from non source system.
If the case study is for any Financial system that will be even great.
if any one has good Document Please Fwd it to e-mail [email protected]

hi rk,
what you means to say something source like flat file, not from r/3 side.
or
what exactly you want,plz explain?
regards,
San!
if helped,assign point!

Steps for loading data into the infocube in BI7, with dso in between

Dear All,
I am loading data into the infocube in BI7, with dso in between. By data flow looks like....
Top to bottom:
InfoCube (Customized)
Transformation
DSO (Customized)
Transformation
DataSource (Customized).
The mapping and everything else looks fine and data is also seen in the cube on the FULL Load.
But due to some minor error (i guess), i am unable to see the DELTA data in DSO, although it is loaded in DataSource through process chains.
Kindly advise me, where did i miss.
OR .. Step by step instructions for loading data into the infocube in BI7, with dso in between would be really helpful.
Regards,

Hi,
my first impulse would be to check if the DSO is set to "direct update". In this case there is no Delta possible, because the Change log is not maintained.
My second thought would be to check the DTP moving data between the DSO and the target cube. If this is set to full, you will not get a delta. It is only possible to create one DTP. So if you created one in FULL mode you can't switch to Delta. Just create the DTP in Delta mode.
Hope this helps.
Kind regards,
Jürgen

Steps for master data loading by using process chain

Hi
I want to load the Master data by using the process chain . Can anyone tell me the step-by-step method for loading the master data .
I means what are the processes should i need to include in the process chain . Pls tell me in sequenece .
i ll assing the points
kumar

Hi,
The process os loading master data is similar to transaction data in terms of using the infopackages.
First you have to load Attr followed by texts and hierarchy.For master data you have to include the process type called as Attribute change run.This can be included as a separate process type or using the AND process.
Hope this helps.
Assign points if useful.
Regards,
Venkat

Steps for transferring website to client

Hi there,
I am in a similar situation as a recent poster. I have designed a Muse website for a client. They are going to subscribe to Muse CC single App (Muse) and take over the maintenance of the site. The site will be hosted by their current hoster and has not been uploaded yet.
Can you tell me the steps for handing over files to them? Is it as simple as sending them the .muse file and then they upload this to their host FTP themselves? Is the .muse file all inconclusive, i.e. images etc.?
Thank you very much. Kim

Hello Kimberly,
You can simply send the .muse file and the assets (images etc.) that you've used in the site and that should be good enough. I'll suggest you have the assets placed in a single folder. So, if on opening the file in Muse, they get a warning that asks them to relink the assets, they can simply relink any one asset (by right clicking on the asset in the assets panel and relinking it), and the other assets would be automatically relinked. This would only happen automatically if the assets are in the same folder.
Hope this helps.
Cheers
Parikshit

BADIs to extract data to EXTRA tab

Hi,
If I have to fillup values in the extra tab, what function module or BADI should I use? Any reference to the procedure is much appreciated.
Thanks.

Hi Visu,
You can do it via the user exit 'APOCF005'.
Regards,
Siva.

Clear steps for HD data migration needed

I have spent a lot of time searching this and other forums and am looking for step by step instructions for replacing a HD and- especially- transferring the data to a new internal drive. I have viewed the video available on YouTube and the info provided by Apple. The actual drive installation seems straightforward, but I am confused about: 1) what type of enclosure do I need? (USB vs Firewire) 2) do I need an additional application or is Disk Utility sufficient? Carbon Copy Cloner? Migration Assistant? Super Duper? Cables? Power adapters? Oy!!
macbook 1.83Ghz Mac OS X (10.4.9) 2 GB RAM

I did this last week, replaced my 80G drive with a 160G drive.
Items required:
- new Serial ATA drive - I chose 160G WD drive from newegg.com, $95 plus tax, free shipping - $102
- Serial ATA external case. I got USB 2.0, Firewire is technically superior, but more difficult to find. I got mine from OWC (macsales.com) for $34.95, plus shipping. Whether you choose Firewire or USB 2.0, MOST important is that the case is for SATA (serial ATA) drives - be absolutely certain on this.
- tools: #0 philips screwdriver, Torx T8 screwdriver
- download free SuperDuper
Procedure:
- close ALL programs first, especially mail. You don't want your received mail to change during this process, though that's not a disaster.
- use Disk Utility to Repair Permissions on your old drive - or just leave it to Super Duper, below.
- install NEW drive in external enclosure. Don't completely reassemble enclosure, since this is temporary
- connect new drive/enclosure to Mac with USB cable
- Use Disk Utility to partition new external drive for one partition, USING GUID partition scheme. Actually, you can use the normal Mac partition scheme, but it won't be able to be booted over USB. Use GUID.
- To be most thorough, erase the new drive using MAC OS Extended (Journaled), and select 'zero out data' under Security Options. The 'zero' part isn't strictly necessary, but many recommend it as the best way to initialize a new drive, allowing the drive to recognize any problem sectors. Takes a while - but worth it.
- SuperDuper. Copy (your internal drive) to (your new drive), using 'Backup - all files'. Under options|General, check 'Repair Permissions...', and select 'Erase (old drive), then copy files from (old drive)', click 'OK' then 'Copy Now'. You'll be asked for an admin user/password.
- wait a long time. It took a couple hours for about 60G.
At this point, you should have a bootable, exact clone of your old drive on the new, USB drive. Depending on a SuperDuper setting I forgot to mention above, it might even have rebooted already, from the new drive.
Anyway, reboot from the external drive, take a few minutes to see that everything works as expected. Probably best not to start mail.
Once you're certain the new clone works correctly, shutdown the Mac.
- swap the internal drive with the external drive.
- reboot the Mac, with the USB disconnected. If all has gone as planned, it should work exactly as it did before. If not, your original drive is untouched, you can swap it back in and try again, or boot from the old drive via USB and try again.
That's from memory - I don't think I forgot anything... I'm sure somebody will correct me if I did.
It's much easier than it sounds - good luck!
MacBook 2.0GhzCore2Duo, 2.Gig, 160G HD, PowerBook G4 1.5Ghz 15" Mac OS X (10.4.10) Logic Pro 7.2.3, Focusrite Saffire...

For transferring data - where are these files located?

I have to transfer critical data from one Mac to another, but cannot simply do a "backup" or overwrite certain files on the 2nd Mac as the first has some system file problems (and the 2nd Mac works fine). So to be safe, I want to transfer these files:
1. Address Book
2. iCal
3. MAIL (all folders and everything)- also my MailTags info if that is separate from MAIL
4. iTunes (Music-Podcasts and if there is a library or reference to these)
5. iPhoto (photos and if there is an index or library related to these)
6. Safari Bookmarks
7. Any other preference files or such - for example I use DragThing and other shareware; or system shareware plists or ??? that may have to be transferred...
Any other items as well as suggestions or any references where this information may be accessed on the web / Apple support site-- I had a lot of backups - but realize I need at least a 2nd Mac and a print-out of things that are stored on my Mac for these times when the Mac fails.
Thanks!
Regards,
Steve
Monday 11 October 2010

Transferring files that way is not likely to work well.
For example, for Mail, you also need the preferences file that contains all the account information -- server names, passwords, mailbox behaviors, rules, etc. (all the things you see when you select +Mail > Preferences+ from the Mail menubar).
Your best bet may be to use +Migration Assistant+ to transfer your user account and it's data to the other Mac. Then you can log on to your account there normally. See [Using Migration Assistant|http://web.me.com/pondini/AppleTips/Migrate.html] for details.
But if you're having problems with the other Mac, you really should fix them before doing anything else.
Do you have backups of your Mac(s)? That's the place to start. You might want to review the Time Machine Tutorial and perhaps browse Time Machine - Frequently Asked Questions (or use the link in *User Tips* at the top of the +Time Machine+ forum).

User defined step for polling data

Hi,
I'm creating a User Defined VI to be called from SignalExpress, that needs to poll a serial device for data.
The serial device makes new data availiable in a register-array at a rate of 10Hz, and uses an additional register as a "message ID" to indicate when new data is availiable.
This means that my VI needs to poll this MessageID, and when it increments, I can read the register array into a waveform and return it to SignalExpress.
Now, what is the best/correct way of writing this VI in regard to the polling wait time?
I see two options here for the case when my VI is called and it detects that no new message is availiable:
It immediately returns to SignalExpress ("non blocking").
In this case, should I return an empty waveform or the previous waveform?
(I do not want duplicated data logged in SignalExpress)
It blocks the SignalExpress loop where the user defined step is placed, by waiting in my VI until a new message arrives, and then returns this new data in a waveform.
My user defined step is placed in a separate loop in signal express so the blocking in case 2 should not affect other DAQ loops in my SignalExpress project, right?
/LeifS

I don't think it is directly possible for changing this at the front end level.
You might need to make changes in some SE24 Classes

I need some help with Migration Assistant for transferring data

I would like to transfer selected items from my iMac (G4) to a new MacBook Pro using Migration Assistant, Can I selectively choose things to transfer? And are there any problems going from a G4 to an Intel-based machine? I'm mostly interested in transferring iPhoto photos and music from iTunes.

Migrating data other than your home folder may replace Intel components with PowerPC ones on the MacBook Pro, which will cause slow performance. Dragging over applications manually by restarting the old Mac with the T key held down and then placing them in the new Mac's Applications folder will work with many applications, but not all; any applications for which this doesn't work will need to be reinstalled.
(21366)

Help for transfering data from one user' all tables to another

Hello guys,
I have trim the extra sizes of columns in almost all tables of my database. Before doing this, I saved the data of tables by creating another user "User1" with the same objects and importing dmp file in it. After this I cleared my original objects and reduced the extra sizes of columns alomost in all tables.
Now I want to transfer data from backup user "User1" into my original user's "User" tables.
Can any one guid me with the way of doing so, so that I could do it just through 3 or 4 lines of code instead of individualy table wise transfering the data...??
regards
Kashif

SQL> select 'insert into '||table_name||' as select * from user1.'||table_name ||' ;' from user_tables where table_name in ('EMP', 'DEPT') ;
'INSERTINTO'||TABLE_NAME||'ASSELECT*FROMUSER1.'||TABLE_NAME||';'
insert into DEPT as select * from user1.DEPT ;
insert into EMP as select * from user1.EMP ;
2 rows selected.
SQL>You could spool the output of the query above to a .SQL script file and then just run it within the same script using @@script_name.SQL.

Transferring data from one custom field to another

Dear SAP gurus,
I have requirement that we create custom field in Shopping Cart and PO, and when creating PO referring to the Shopping Cart the content of the custom field in SC need to be defaulted automatically in PO. For example I create SC 'A' and inputting 'X' in custom field in SC. When creating PO from SC, in the screen, the custom field in PO should be automatically populated by 'X'.
Is there any way to accomodate this in SRM?
Best regards,
John

Hello John,
Did you give different field name for the custom field in SC and PO structure.
If the field names are same then only it will automatically populate the value.
Sc custom value is getting saved in Data base table check once.
Regards,
Neelima

Use Time Machine for transferring data to new drive

2008 pre-unibody 17" 250GB MacBook Pro4,1 - 2GB RAM, 10.6.8, 2.5ghz
How can I use Time Machine to transfer data to hybrid 1TB Seagate SSD?

Hi V.K., was just reading your instructions for jumper25 about transferring all info to a new HD and had a question. I am in the same situation where i have bought a new 320Gb to replace the OEM 120Gb in my MBP. Everything is very straight forward from what you have posted but i only have the original Tiger 10.4.9 install DVD and I am running Leopard 10.5.5. Will I be able to use my Tiger install disk and then use my TM back up even though it Leopard? Or will I need a Leopard install disk to complete? Also is there another way around this problem if i can not use the Tiger disk such as mirroring the 120Gb disk on to my 320Gb?
Thanks in advance for your time and expertise.
P.

Integration steps for Transfering Marketing plan CRM - ECC

Hi Experts ,
Could any one give step by step integration process to transfer Marketing plan from CRM to R3 once its status is changed to released
Thanks & Regards,
SAP CRM

Hi SAP CRM,
you need to follow teh steps mentioned to transfer camapign from CRM to R/3
1. In Spro>Customer Relationship Management>Marketing>Marketing Planning and Campaign Management>System Landscape
Define RFC Connections
Define Target Systems (ERP, BI, SEM, CPRO)
Define ERP Integration Type-if it is online,carry out step a,if it is middleware carry out step b
a.Assign ERP Project Profile to RFC Destination
b.Assign ERP Project Scenario to RFC Destination
Define Formatting Mask for Marketing Projects(this should be same as in ECC only then successful transfer is possible)
after this is done,to transfer the plan
1. If you use Online ERP integration type,after you release your plan,
select transfer to ERP from the menu(you will be taken to a new screen,)put the ERP destination there,select the row and press the button transfer to ERP,you plan will get transferred to ECC
2. If you use Middleware integration type,the moment you can the status of marketing plan to Released,the plan gets transferred to ECC
You can check it in ECC by using tcode CJ20n
Regards
Itty

Steps for transferring data to extra tab fields

Similar Messages

Maybe you are looking for