Steps involved in setting up communication between CRM and R3 / ECC
Hi all,
Can you please tell what are the steps involved in setting up communication between CRM and R3 or ECC.
I know that initially logical systems, RFC connections and other technical settings need to be done by Basis consultants.
From a functional consultants viewpoint, what all config settings need to be done so that data transfer between the systems can take place?
Thanks in advance.
Hi,
There are a series of steps that are to be done...
These include creating sites and subscription in CRM, setting up filters, and number ranges....
All these are in the connectivity guide C71 and replication guide B09.
Refer C71 first and then B09. These would suffice.
You can get these both in the follwoing reference:
http://help.sap.com/bp_crmv340/CRM_DE/index.htm
If you dont get, then gimme your email id, i shall forward these docs to you.
Kindly reward with points in case helpful
Sharif.
Similar Messages
-
Communication between CRM and ERP for E-commerce scenario
Question more on lines of system architecture design.
We are planning to implement CRM E-commerce and wanted to find out more detail about the communication between CRM and ERP systems. Do they need to communicate in real time for this application, or is it mainly initial and delta loads? Is the amount of data exchanged huge ( necessitating both systems to be on the same network, or can they be on separate geographical locations )?
We also understand that E-commerce can also be done only using ERP. How does that differ from the CRM version?Hey Sanket,
Q 1 . Do CRM and ECC need to communicate in real time for Ecommerce application, or is it mainly initial and delta loads
Ans. CRM and ECC communicate using RFC connections which further uses TCP/IP as the protocol.The communication can be both real time { delta loads} or offline {initial download}.
Q2 .Is the amount of data exchanged huge ( necessitating both systems to be on the same network, or can they be on separate geographical locations )?
Ans. The amount of data can be huge hence its preferable that both systems to be on the same network.
Q 3. We also understand that E-commerce can also be done only using ERP. How does that differ from the CRM version
Ans.Theres no difference functionally but technically the application connects to the ECC system using JCO to execute all the RFC enabled function modules.
Warm Regards,
Sumit -
Error during VM container communication between ABAP and JAVA
Hello,
While creation of SC, I am getting error "Error during VM container communication between ABAP and JAVA"
Based on earlier responses in this forum, I checked following activity.
1. T Code - BBP_CND_CHECK_CUST
Result - IPC Pricing is Active and IPC is now running in VMC
2. Run Report - RSVMCRT_HEALTH_CHECK
Result - The Java component is deactivated
3. As per OSS note 854170, Profile parameters were existed as below
a) vmcj/enable - on
b) vmcj/option/maxJavaHeap = 200M
So, How to get Java component activated?
Thanks,
Rahul MandaleThanks Markus,
For SM53, I am getting resulets as " Java is not active on this application server - Message no. SVMCRT011"
Can you suggest, what I need to do for it? I can't use SRM Shopping cart because of it. thanks in advance, Rahul
and dev_w0 trace ....
trc file: "dev_w0", trc level: 1, release: "700"
ACTIVE TRACE LEVEL 1
ACTIVE TRACE COMPONENTS all, MJ
B
B Wed Aug 31 15:45:40 2011
B create_con (con_name=R/3)
B Loading DB library 'D:\usr\sap\CUS\DVEBMGS04\exe\dboraslib.dll' ...
B Library 'D:\usr\sap\CUS\DVEBMGS04\exe\dboraslib.dll' loaded
B Version of 'D:\usr\sap\CUS\DVEBMGS04\exe\dboraslib.dll' is "700.08", patchlevel (0.46)
B New connection 0 created
M sysno 04
M sid CUS
M systemid 560 (PC with Windows NT)
M relno 7000
M patchlevel 0
M patchno 52
M intno 20050900
M make: multithreaded, Unicode, optimized
M pid 456
M
M kernel runs with dp version 210000(ext=109000) (@(#) DPLIB-INT-VERSION-210000-UC)
M length of sys_adm_ext is 572 bytes
M ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 456) [dpxxdisp.c 1293]
I MtxInit: 30000 0 0
M DpSysAdmExtCreate: ABAP is active
M DpSysAdmExtCreate: VMC (JAVA VM in WP) is not active
M DpShMCreate: sizeof(wp_adm) 18304 (1408)
M DpShMCreate: sizeof(tm_adm) 3954072 (19672)
M DpShMCreate: sizeof(wp_ca_adm) 24000 (80)
M DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
M DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528056/528064
M DpShMCreate: sizeof(comm_adm) 528064 (1048)
M DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
M DpShMCreate: sizeof(file_adm) 0 (72)
M DpShMCreate: sizeof(vmc_adm) 0 (1452)
M DpShMCreate: sizeof(wall_adm) (38456/34360/64/184)
M DpShMCreate: sizeof(gw_adm) 48
M DpShMCreate: SHM_DP_ADM_KEY (addr: 05C00040, size: 4613144)
M DpShMCreate: allocated sys_adm at 05C00040
M DpShMCreate: allocated wp_adm at 05C01E28
M DpShMCreate: allocated tm_adm_list at 05C065A8
M DpShMCreate: allocated tm_adm at 05C065D8
M DpShMCreate: allocated wp_ca_adm at 05FCBB70
M DpShMCreate: allocated appc_ca_adm at 05FD1930
M DpShMCreate: allocated comm_adm at 05FD3870
M DpShMCreate: system runs without file table
M DpShMCreate: allocated vmc_adm_list at 06054730
M DpShMCreate: allocated gw_adm at 06054770
M DpShMCreate: system runs without vmc_adm
M DpShMCreate: allocated ca_info at 060547A0
M DpShMCreate: allocated wall_adm at 060547A8
X EmInit: MmSetImplementation( 2 ).
X MM diagnostic options set: 0
X <ES> client 0 initializing ....
X Using implementation flat
M <EsNT> Memory Reset disabled as NT default
X ES initialized.
M
M Wed Aug 31 15:45:41 2011
M ThInit: running on host crmsys
M
M Wed Aug 31 15:45:42 2011
M calling db_connect ...
C Prepending D:\usr\sap\CUS\DVEBMGS04\exe to Path.
C
C Wed Aug 31 15:45:47 2011
C Client NLS settings: AMERICAN_AMERICA.UTF8
C Logon as OPS$-user to get SAPSR3's password
C Connecting as /@CRM on connection 0 (nls_hdl 0) ... (dbsl 700 240106)
C Nls CharacterSet NationalCharSet C EnvHp ErrHp ErrHpBatch
C 0 UTF8 1 0619F158 061A46F4 061A3F7C
C Attaching to DB Server CRM (con_hdl=0,svchp=061A3EC8,svrhp=061B5794)
C Starting user session (con_hdl=0,svchp=061A3EC8,srvhp=061B5794,usrhp=061CA558)
C
C Wed Aug 31 15:45:48 2011
C Now '/@CRM' is connected (con_hdl 0, nls_hdl 0).
C Got SAPSR3's password from OPS$-user
C Disconnecting from connection 0 ...
C Closing user session (con_hdl=0,svchp=061A3EC8,usrhp=061CA558)
C Now I'm disconnected from ORACLE
C Connecting as SAPSR3/<pwd>@CRM on connection 0 (nls_hdl 0) ... (dbsl 700 240106)
C Nls CharacterSet NationalCharSet C EnvHp ErrHp ErrHpBatch
C 0 UTF8 1 0619F158 061A46F4 061A3F7C
C Starting user session (con_hdl=0,svchp=061A3EC8,srvhp=061B5794,usrhp=061CA558)
C Now 'SAPSR3/<pwd>@CRM' is connected (con_hdl 0, nls_hdl 0).
C Database NLS settings: AMERICAN_AMERICA.UTF8
C Database instance CRM is running on CRMSYS with ORACLE version 10.2.0.1.0 since 20110831
B
B Wed Aug 31 15:45:49 2011
B Connection 0 opened (DBSL handle 0)
B Wp Hdl ConName ConId ConState TX PRM RCT TIM MAX OPT Date Time DBHost
B 000 000 R/3 000000000 ACTIVE NO YES NO 000 255 255 20110831 154542 CRMSYS
M db_connect o.k.
M ICT: exclude compression: .zip,.cs,.rar,.arj,.z,.gz,.tar,.lzh,.cab,.hqx,.ace,.jar,.ear,.war,.css,.pdf,.js,.gzip,.uue,.bz2,.iso,.sda,.sar,.gif
I
I Wed Aug 31 15:46:12 2011
I MtxInit: 0 0 0
M SHM_PRES_BUF (addr: 0A7C0040, size: 4400000)
M SHM_ROLL_AREA (addr: 788A0040, size: 61440000)
M SHM_PAGING_AREA (addr: 0AC00040, size: 32768000)
M SHM_ROLL_ADM (addr: 0CB50040, size: 615040)
M SHM_PAGING_ADM (addr: 0CBF0040, size: 525344)
M ThCreateNoBuffer allocated 544152 bytes for 1000 entries at 0CC80040
M ThCreateNoBuffer index size: 3000 elems
M ThCreateVBAdm allocated 12160 bytes (50 server) at 0CD10040
X EmInit: MmSetImplementation( 2 ).
X MM diagnostic options set: 0
X <ES> client 0 initializing ....
X Using implementation flat
X ES initialized.
B db_con_shm_ini: WP_ID = 0, WP_CNT = 13, CON_ID = -1
B dbtbxbuf: Buffer TABL (addr: 10E700C8, size: 30000000, end: 12B0C448)
B dbtbxbuf: Buffer TABLP (addr: 12B100C8, size: 10240000, end: 134D40C8)
B dbexpbuf: Buffer EIBUF (addr: 0FBA00D0, size: 4194304, end: 0FFA00D0)
B dbexpbuf: Buffer ESM (addr: 134E00D0, size: 4194304, end: 138E00D0)
B dbexpbuf: Buffer CUA (addr: 138F00D0, size: 3072000, end: 13BDE0D0)
B dbexpbuf: Buffer OTR (addr: 13BE00D0, size: 4194304, end: 13FE00D0)
M rdisp/reinitialize_code_page -> 0
M icm/accept_remote_trace_level -> 0
M rdisp/no_hooks_for_sqlbreak -> 0
M CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
S
S Wed Aug 31 15:46:15 2011
S *** init spool environment
S initialize debug system
T Stack direction is downwards.
T debug control: prepare exclude for printer trace
T new memory block 1946AA80
S
S Wed Aug 31 15:46:16 2011
S spool kernel/ddic check: Ok
S using table TSP02FX for frontend printing
S 1 spool work process(es) found
S frontend print via spool service enabled
S printer list size is 150
S printer type list size is 50
S queue size (profile) = 300
S hostspool list size = 3000
S option list size is 30
S found processing queue enabled
S found spool memory service RSPO-RCLOCKS at 1D6D00A8
S doing lock recovery
S setting server cache root
S found spool memory service RSPO-SERVERCACHE at 1D6D0430
S using messages for server info
S size of spec char cache entry: 297028 bytes (timeout 100 sec)
S size of open spool request entry: 2132 bytes
S immediate print option for implicitely closed spool requests is disabled
A
A Wed Aug 31 15:46:18 2011
A
A -PXA--
A PXA INITIALIZATION
A PXA: Fragment Size too small: 73 MB, reducing # of fragments
A System page size: 4kb, total admin_size: 5132kb, dir_size: 5076kb.
A Attached to PXA (address 688A0040, size 150000K)
A abap/pxa = shared protect gen_remote
A PXA INITIALIZATION FINISHED
A -PXA--
A
A
A Wed Aug 31 15:46:20 2011
A ABAP ShmAdm attached (addr=57A40000 leng=20955136 end=58E3C000)
A >> Shm MMADM area (addr=57EB5E58 leng=126176 end=57ED4B38)
A >> Shm MMDAT area (addr=57ED5000 leng=16150528 end=58E3C000)
A RFC Destination> destination crmsys_CUS_04 host crmsys system CUS systnr 4 (crmsys_CUS_04)
A
A Wed Aug 31 15:46:21 2011
A RFC Options> H=crmsys,S=04,d=2,
A RFC FRFC> fallback activ but this is not a central instance.
A
A RFC rfc/signon_error_log = -1
A RFC rfc/dump_connection_info = 0
A RFC rfc/dump_client_info = 0
A RFC rfc/cp_convert/ignore_error = 1
A RFC rfc/cp_convert/conversion_char = 23
A RFC rfc/wan_compress/threshold = 251
A RFC rfc/recorder_pcs not set, use defaule value: 2
A RFC rfc/delta_trc_level not set, use default value: 0
A RFC rfc/no_uuid_check not set, use default value: 0
A RFC rfc/bc_ignore_thcmaccp_retcode not set, use default value: 0
A RFC Method> initialize RemObjDriver for ABAP Objects
M ThrCreateShObjects allocated 13730 bytes at 0FFB0040
N
N Wed Aug 31 15:46:22 2011
N SsfSapSecin: putenv(SECUDIR=D:\usr\sap\CUS\DVEBMGS04\sec): ok
N
N =================================================
N === SSF INITIALIZATION:
N ===...SSF Security Toolkit name SAPSECULIB .
N ===...SSF trace level is 0 .
N ===...SSF library is D:\usr\sap\CUS\DVEBMGS04\exe\sapsecu.dll .
N ===...SSF hash algorithm is SHA1 .
N ===...SSF symmetric encryption algorithm is DES-CBC .
N ===...sucessfully completed.
N =================================================
N
N Wed Aug 31 15:46:23 2011
N MskiInitLogonTicketCacheHandle: Logon Ticket cache pointer retrieved from shared memory.
N MskiInitLogonTicketCacheHandle: Workprocess runs with Logon Ticket cache.
M JrfcVmcRegisterNativesDriver o.k.
W =================================================
W === ipl_Init() called
B dbtran INFO (init_connection '<DEFAULT>' [ORACLE:700.08]):
B max_blocking_factor = 15, max_in_blocking_factor = 5,
B min_blocking_factor = 10, min_in_blocking_factor = 5,
B prefer_union_all = 0, prefer_join = 0,
B prefer_fix_blocking = 0, prefer_in_itab_opt = 1,
B convert AVG = 0, alias table FUPD = 0,
B escape_as_literal = 1, opt GE LE to BETWEEN = 0,
B select * =0x0f, character encoding = STD / <none>:-,
B use_hints = abap->1, dbif->0x1, upto->2147483647, rule_in->0,
B rule_fae->0, concat_fae->0, concat_fae_or->0
W
W Wed Aug 31 15:46:24 2011
W ITS Plugin: Path dw_gui
W ITS Plugin: Description ITS Plugin - ITS rendering DLL
W ITS Plugin: sizeof(SAP_UC) 2
W ITS Plugin: Release: 700, [7000.0.52.20050900]
W ITS Plugin: Int.version, [32]
W ITS Plugin: Feature set: [10]
W ===... Calling itsp_Init in external dll ===>
W === ipl_Init() returns 0, ITSPE_OK: OK
W =================================================
E Enqueue Info: rdisp/wp_no_enq=1, rdisp/enqname=<empty>, assume crmsys_CUS_04
E Replication is disabled
E EnqCcInitialize: local lock table initialization o.k.
E EnqId_SuppressIpc: local EnqId initialization o.k.
E EnqCcInitialize: local enqueue client init o.k.
B
B Wed Aug 31 15:46:48 2011
B table logging switched off for all clients
M
M Wed Aug 31 15:47:55 2011
M SecAudit(RsauShmInit): WP attached to existing shared memory.
M SecAudit(RsauShmInit): addr of SCSA........... = 05BD0040
M SecAudit(RsauShmInit): addr of RSAUSHM........ = 05BD07A8
M SecAudit(RsauShmInit): addr of RSAUSLOTINFO... = 05BD07E0
M SecAudit(RsauShmInit): addr of RSAUSLOTS...... = 05BD07EC
A
A Wed Aug 31 15:48:44 2011
A RFC FRFC> fallback on the central gateway crmsys sapgw04 activ
B
B Wed Aug 31 15:49:47 2011
B dbmyclu : info : my major identification is 3232288873, minor one 4.
B dbmyclu : info : Time Reference is 1.12.2001 00:00:00h GMT.
B dbmyclu : info : my initial uuid is D98FA690E8AA314D9B69930868792664.
B dbmyclu : info : current optimistic cluster level: 0
B dbmyclu : info : pessimistic reads set to 2. -
Is in PI7.1 possible asynchronous communication between SOAP and ABAPProxy?
Hi,
when method execute_asynchronous has disapeared since XI/PI 7.1, is
there still way how to use ABAP proxy in asynchronous way?
We need to build asynchronous connection SOAP->PI->ABAP_Proxy.
In PI, both interfaces are defined as asynchronous (outbound for SOAP and
inbound for ABAP Proxy).
Despite of this fact, when message is sent, it is processed
synchronous way.
I have set breakpoint in my implementation of method for ABAP Proxy
message processing. When message is sent and breakpoint is reached,
whole connection stays open (between SOAP and PI and between PI and
ABAP Proxy) and waits for processing method (the breakpointed one) to
return. Only when processing method returns, is connection finelly
closed.
If i understand it correctly, this is synchronous behavior. In
asynchronous behavior, as i understand it, should be connection
between PI and ABAP Proxy of application server closed immediately
after message has been delivered. This mean before my processing
method is even called.
The same could be said about SOAP and PI communication. Connection
should be closed immediately after PI has received message. From
definition of asynchronous communication of PI is obvious, that PI
should receive message correctly and close connection to sender system
even when receiver is unreachable. It should deliver message later
when, receiver system is back on line. So why it keeps connection to
sender system open while it waits for receiver?
Why is this happening, when both interfaces are defined as
asynchronous? Could be the reason for this, if APPLICATION
ACKNOWLEDGEMENT is set on by default? If so, how can i change it
to SYSTEM ACKNOWLEDGEMENT, or disable it at all?
Or is this kind of asynchronous communication even possible since
XI/PI 7.1 ?
Processing of message we are sending can take some time, so we dont
want connection pending open while waiting for finish of
processing. Thats the reason why we have chose asynchronous model to
use.Quote from How to Use the J2EE SOAP Adapter:
"If you select Best Effort, the Web service client will receive a response
message in the SOAP body. Otherwise, the Web service client will not receive a
response message if no error occurs."
"if no error occurs" - that is the problem. In either case he still
waits if some error occure or not. I dont want it. Once PI has
received message, I want the connection with sender to be closed. If
there will be error in communication between PI and reciever, I want
to see it only in PI log. That mean no notification to sender to be
send about that error.
Is that possible? -
COMMUNICATION BETWEEN JAVASCRIPT AND JAVA APPLET: US$20 AWARD FOR SOLUTION!
COMMUNICATION BETWEEN JAVASCRIPT AND JAVA APPLET PROBLEM (Easy Filter Java Applet) -
US$20 TO ANYONE WHO CAN RESOLVE THE PROBLEM
To forum visitors:
I am prepared to pay a standard shareware fee of US$20 to a user who can resolve this technical problem.
If your advice resolves the problem, I'll forward the payment to your postal address (include your
address with your reply, and also your email address)
I am attempting to enable a HTML button (using Javascript's onClick command) to directly input a number into one of the parameter text boxes in the Easy Filter Java applet (ie, enter a new color value number in the text field of the standard Colors Multiplicator Filter interface).
The applet is Freeware and can be downloaded at: http://www.javazoom.net/applets/easyfilter10/EasyFilter10.html
(It is a very effective bitmap display and editing utility)
To achieve this, I am trying to access the part of the applet that defines and sets the textbox. The text box is defined in the .class file by accessing the parameter details in the genericfilter.txt file (accompanies the .class files). I need to access 'private String appletInitialize()' and then one of the 'textFieldParameters' which sets the textbox.
I understand the basic syntax for referencing the applet:
document.appletname.setString("An example"). However, accessing the text fields in this applet is more complex!!
Please can you recommend the correct Javascript syntax to achieve communication with the applet.
Thank you for your kind assistance.
JM Graham
[email protected]
The Java source code for the applet: EasyFilter.class
# Easy Filter - E.B/JavaZOOM 1999 #
# Contact: [email protected] #
# http://javazoom.hypermart.net #
/* Originally compiled from EasyFilter.java */
import java.awt.*;
import java.io.*;
import java.net.*;
import java.applet.Applet;
import java.awt.event.KeyEvent;
import java.awt.event.KeyListener;
import java.awt.image.MemoryImageSource;
import java.awt.image.PixelGrabber;
import java.util.Vector;
public synchronized class EasyFilter extends Applet implements KeyListener
private String paramFileName;
private Color bgColor;
private Color fgColor;
private Color parColor;
private Color sepColor;
private Color titleColor;
private Color helpColor;
private int WinWidth;
private int WinHeight;
private String title;
private String logoFileName;
private String originalImageFileName;
private String filteredCaption;
private String originalCaption;
private Vector paramsName;
private Vector paramsValue;
private Vector paramsComment;
private Panel panelParameters[];
private Label labelParameters[];
private TextField textFieldParameters[];
private Label labelComments[];
private int nbParameters;
private ScrollPane scrollPaneParams;
private Panel panelParams;
private Image theLogo;
private Image theOriginalImage;
private Image theFilteredImage;
private int theOriginalPixelArray[];
private int logoWidth;
private int logoHeight;
private int imageWidth;
private int imageHeight;
private drawCanvas canvasTitle;
private Panel panelTitle;
private Label labelTitle;
private Panel panelImages;
private Panel panelOriginalImage;
private drawCanvas canvasOriginalImage;
private Label labelOriginalImage;
private Panel panelFilteredImage;
private drawCanvas canvasFilteredImage;
private Label labelFilteredImage;
private Panel panelHelp;
private Label labelHelp;
private int Yspc;
private FilterImplementation theFilter;
public void init()
String string = null;
string = appletInitialize();
setBackground(bgColor);
if (string != null)
removeAll();
setBackground(Color.white);
setForeground(Color.black);
Label label = new Label(new StringBuffer("Error: ").append(string).toString(), 1);
Panel panel = new Panel();
panel.add(label);
add(panel);
setLayout(new FlowLayout(1, 5, Yspc));
public void keyPressed(KeyEvent keyEvent)
panelHelp.removeAll();
boolean flag = true;
if (KeyEvent.getKeyText(keyEvent.getKeyCode()).equals("Enter"))
for (int i = 0; i < nbParameters; )
try
paramsValue.setElementAt(new Double(textFieldParameters.getText()), i);
i++;
catch (NumberFormatException e)
labelHelp.setText(labelParameters[i].getText() + ": Not a Number");
flag = false;
break;
if (flag == 1)
labelHelp.setText(" .... Running, please wait .... ");
labelHelp.setAlignment(1);
panelHelp.add(labelHelp);
panelHelp.doLayout();
theFilter.updateParameters(paramsValue);
theFilter.computeFilter();
theFilteredImage = createImage(new MemoryImageSource(theFilter.getFinalImageWidth(), theFilter.getFinalImageHeight(), theFilter.getFinalImageBuffer(), 0, theFilter.getFinalImageWidth()));
canvasFilteredImage.setImage(theFilteredImage);
canvasFilteredImage.setBounds(0, 0, theFilter.getFinalImageWidth(), theFilter.getFinalImageHeight());
canvasFilteredImage.repaint();
panelHelp.removeAll();
labelHelp.setText("- Done -");
else
labelHelp.setText("- Press Enter to run the Filter -");
labelHelp.setAlignment(1);
panelHelp.add(labelHelp);
panelHelp.doLayout();
public void keyReleased(KeyEvent keyEvent)
public void keyTyped(KeyEvent keyEvent)
private String appletInitialize()
WinWidth = size().width;
WinHeight = size().height;
if (getParameter("bgcolor") == null)
bgColor = new Color(0, 0, 40);
else
bgColor = new Color(Integer.parseInt(getParameter("bgcolor"), 16));
if (getParameter("fgcolor") == null)
fgColor = new Color(255, 255, 255);
else
fgColor = new Color(Integer.parseInt(getParameter("fgcolor"), 16));
if (getParameter("sepcolor") == null)
sepColor = new Color(158, 128, 128);
else
sepColor = new Color(Integer.parseInt(getParameter("sepcolor"), 16));
if (getParameter("parcolor") == null)
parColor = new Color(24, 24, 24);
else
parColor = new Color(Integer.parseInt(getParameter("parcolor"), 16));
if (getParameter("titlecolor") == null)
titleColor = new Color(255, 255, 0);
else
titleColor = new Color(Integer.parseInt(getParameter("titlecolor"), 16));
if (getParameter("helpcolor") == null)
helpColor = new Color(0, 255, 255);
else
helpColor = new Color(Integer.parseInt(getParameter("helpcolor"), 16));
paramsName = new Vector();
paramsValue = new Vector();
paramsComment = new Vector();
paramFileName = getParameter("paramfile");
String string = readParams(paramFileName);
if (string != null)
return string;
MediaTracker mediaTracker = new MediaTracker(this);
theOriginalImage = getImage(getDocumentBase(), originalImageFileName);
mediaTracker.addImage(theOriginalImage, 0);
if (logoFileName != null)
theLogo = getImage(getDocumentBase(), logoFileName);
mediaTracker.addImage(theLogo, 1);
try
mediaTracker.waitForAll();
catch (InterruptedException e1)
return "Error while loading image";
if (mediaTracker.isErrorAny())
return "Error while loading image";
if (logoFileName != null)
logoWidth = theLogo.getWidth(this);
logoHeight = theLogo.getHeight(this);
imageWidth = theOriginalImage.getWidth(this);
imageHeight = theOriginalImage.getHeight(this);
theOriginalPixelArray = new int[imageWidth * imageHeight];
PixelGrabber pixelGrabber = new PixelGrabber(theOriginalImage, 0, 0, imageWidth, imageHeight, theOriginalPixelArray, 0, imageWidth);
try
pixelGrabber.grabPixels();
panelTitle = new Panel();
canvasTitle = new drawCanvas();
labelTitle = new Label();
panelTitle.setLayout(new FlowLayout(1, 10, Yspc));
add(panelTitle);
panelTitle.setBackground(bgColor);
panelTitle.add(canvasTitle);
canvasTitle.setImage(theLogo);
canvasTitle.setBounds(0, 0, logoWidth, logoHeight);
labelTitle.setText(title);
catch (InterruptedException e2)
return "Internal Error, Try RELOAD !";
if (title != null)
panelTitle.add(labelTitle);
labelTitle.setForeground(titleColor);
labelTitle.setFont(new Font("Dialog", 1, 14));
panelImages = new Panel();
panelOriginalImage = new Panel();
canvasOriginalImage = new drawCanvas();
labelOriginalImage = new Label();
panelFilteredImage = new Panel();
canvasFilteredImage = new drawCanvas();
labelFilteredImage = new Label();
panelImages.setLayout(new FlowLayout(1, 10, Yspc));
add(panelImages);
panelImages.setBackground(bgColor);
panelOriginalImage.setLayout(new BorderLayout(0, 2));
panelImages.add(panelOriginalImage);
panelOriginalImage.setBackground(Color.black);
panelOriginalImage.add("Center", canvasOriginalImage);
canvasOriginalImage.setImage(theOriginalImage);
canvasOriginalImage.setBounds(0, 0, imageWidth, imageHeight);
labelOriginalImage.setText(originalCaption);
labelOriginalImage.setAlignment(1);
panelOriginalImage.add("South", labelOriginalImage);
labelOriginalImage.setBackground(Color.lightGray);
labelOriginalImage.setForeground(Color.black);
labelOriginalImage.setFont(new Font("SansSerif", 0, 10));
panelFilteredImage.setLayout(new BorderLayout(0, 2));
panelImages.add(panelFilteredImage);
panelFilteredImage.setBackground(Color.black);
panelFilteredImage.add("Center", canvasFilteredImage);
theFilter = new FilterImplementation(paramsValue, theOriginalPixelArray, imageWidth, imageHeight);
theFilter.computeFilter();
theFilteredImage = createImage(new MemoryImageSource(theFilter.getFinalImageWidth(), theFilter.getFinalImageHeight(), theFilter.getFinalImageBuffer(), 0, theFilter.getFinalImageWidth()));
canvasFilteredImage.setImage(theFilteredImage);
canvasFilteredImage.setBounds(0, 0, theFilter.getFinalImageWidth(), theFilter.getFinalImageHeight());
labelFilteredImage.setText(filteredCaption);
labelFilteredImage.setAlignment(1);
panelFilteredImage.add("South", labelFilteredImage);
labelFilteredImage.setBackground(Color.lightGray);
labelFilteredImage.setFont(new Font("SansSerif", 0, 10));
scrollPaneParams = new ScrollPane(0);
panelParams = new Panel();
nbParameters = paramsName.size();
int i = WinHeight - (33 + 7 * Yspc + logoHeight + imageHeight + 23);
if (i < Yspc + 2 + 24)
i = Yspc + 2 + 24;
scrollPaneParams.setBounds(0, 0, WinWidth - 10, i);
panelParams.setLayout(new GridLayout(nbParameters, 1, 5, Yspc / 2));
scrollPaneParams.add(panelParams);
panelParams.setBackground(sepColor);
panelParameters = new Panel[nbParameters];
labelParameters = new Label[nbParameters];
textFieldParameters = new TextField[nbParameters];
labelComments = new Label[nbParameters];
for (int j = 0; j < nbParameters; j++)
panelParameters[j] = new Panel();
panelParameters[j].setLayout(new FlowLayout(0, 5, 1));
panelParams.add(panelParameters[j]);
panelParameters[j].setBackground(parColor);
labelParameters[j] = new Label();
labelParameters[j].setText((String)paramsName.elementAt(j));
panelParameters[j].add(labelParameters[j]);
labelParameters[j].setForeground(fgColor);
labelParameters[j].setFont(new Font("Dialog", 1, 12));
textFieldParameters[j] = new TextField(8);
textFieldParameters[j].setText(paramsValue.elementAt(j).toString());
panelParameters[j].add(textFieldParameters[j]);
textFieldParameters[j].setBackground(fgColor);
textFieldParameters[j].addKeyListener(this);
labelComments[j] = new Label();
labelComments[j].setText((String)paramsComment.elementAt(j));
panelParameters[j].add(labelComments[j]);
labelComments[j].setForeground(fgColor);
add(scrollPaneParams);
panelHelp = new Panel();
labelHelp = new Label();
panelHelp.setLayout(new FlowLayout(1, 5, 0));
add(panelHelp);
panelHelp.setBackground(bgColor);
labelHelp.setText(" Change colour values and press enter ");
labelHelp.setAlignment(1);
panelHelp.add(labelHelp);
labelHelp.setForeground(helpColor);
return null;
private String readParams(String string1)
Object object1;
String string2;
if (string1 == null)
return "Filename of filter's parameters needed";
try
URL uRL = new URL(getDocumentBase(), string1);
URLConnection uRLConnection = uRL.openConnection();
uRLConnection.setDoInput(true);
uRLConnection.setUseCaches(false);
BufferedReader bufferedReader = new BufferedReader(new InputStreamReader(uRLConnection.getInputStream()));
string2 = null;
catch ()
return object1.getMessage();
catch ()
return object1.getMessage();
catch ()
return object1.getMessage();
if (bufferedReader != null)
Object object2;
try
for (object2 = bufferedReader.readLine(); object2 != null && string2 == null; object2 = bufferedReader.readLine())
string2 = extractFormat(object2);
catch ()
string2 = object2.getMessage();
finally
bufferedReader.close();
if (string2 != null)
return string2;
else
return null;
private String extractFormat(String string1)
if (string1.length() == 0)
return null;
int i = 0;
int j = string1.indexOf(" ", i);
if (j == -1)
return "Bad format error (space missing)";
String string2 = string1.substring(i, j);
if (string2.equals("TITLE"))
i = j;
j = string1.indexOf(34, i);
if (j == -1)
return "Bad format (Double quote in TITLE missing)";
i = j + 1;
j = string1.indexOf(34, i);
if (j == -1)
return "Bad format (Double quote in TITLE missing)";
title = string1.substring(i, j);
return null;
if (string2.equals("ORIGINALCAPTION"))
i = j;
j = string1.indexOf(34, i);
if (j == -1)
return "Bad format (Double quote in ORIGINALCAPTION missing)";
i = j + 1;
j = string1.indexOf(34, i);
if (j == -1)
return "Bad format (Double quote in ORIGINALCAPTION missing)";
originalCaption = string1.substring(i, j);
return null;
if (string2.equals("FILTEREDCAPTION"))
i = j;
j = string1.indexOf(34, i);
if (j == -1)
return "Bad format (Double quote in FILTEREDCAPTION missing)";
i = j + 1;
j = string1.indexOf(34, i);
if (j == -1)
return "Bad format (Double quote in FILTEREDCAPTION missing)";
filteredCaption = string1.substring(i, j);
return null;
if (string2.equals("LOGO"))
i = j + 1;
j = string1.length();
logoFileName = string1.substring(i, j);
return null;
if (string2.equals("ORIGINALIMAGE"))
i = j + 1;
j = string1.length();
originalImageFileName = string1.substring(i, j);
return null;
if (!string2.equals("PARAM"))
return null;
i = j;
j = string1.indexOf(34, i);
if (j == -1)
return "Bad format in a PARAM line";
i = j + 1;
j = string1.indexOf(34, i);
if (j == -1)
return "Bad format in a PARAM line";
paramsName.addElement(string1.substring(i, j));
i = j + 2;
j = string1.indexOf(32, i);
if (j == -1)
return "Bad format in a PARAM line";
try
paramsValue.addElement(new Double(string1.substring(i, j)));
j = string1.indexOf(34, i);
catch (NumberFormatException e)
return "Bad format in a PARAM line";
if (j == -1)
return "Bad format (Double quote in PARAM comment missing)";
i = j + 1;
j = string1.indexOf(34, i);
if (j == -1)
return "Bad format (Double quote in PARAM comment missing)";
paramsComment.addElement(string1.substring(i, j));
return null;
public EasyFilter()
logoHeight = 33;
Yspc = 5;Addition to my above submission
To clarify, I'll offer the US$20 to the FIRST person who offers me a workable solution to the problem, not to everyone!!!
JMGRAHAM -
Short dump Error during VM container communication between ABAP and JAVA.
Hello All,
Can anybody please help with resolving the following issue:
Short dump is displayed, when I try to insert CRM product (type: material) in the document (opportunity). This CRM product was created in CRM directly.
When I try to insert ECC migrated material, everything works fine.
Here is the details of dump:
Short text
Error during VM container communication between ABAP and JAVA
Information on where terminated
Termination occurred in the ABAP program "SAPLPRC_INT" - in "GET_PRICING_PROCEDURE_INFO".
The main program was "SAPMHTTP ". In the source code you have the termination point in line 100 of the (Include) program "LPRC_INTF35".
Thank you!hi Willie,
this is the dump, and i have used the t-code sm52 . the VMC is not active.
|Short Text |
| Error during VM Container communication between ABAP and JAVA. |
|What happened? |
| The current program had to be terminated because of an |
| error when installing the R/3 System. |
| Error in the RFC layer. |
|What can you do? |
| Note which actions and entries caused the error to occur. |
| |
| Consult your SAP administrator. |
| |
| Using transaction ST22 for ABAP dump analysis, you can view, manage, |
| and retain termination messages for longer periods. |
|Error analysis |
| An error has occurred in the RFC layer during communication between |
| JAVA and the ABAP stack. This prevents data from being passed correctly |
| between the two stacks. |
| |
| Message = TH_VMC_SERV_NOT_ACTIVE |
| Return code = -1007 |
| Pointer = "000007DD348F6138" |
|How to correct the error |
| Check whether the VMC is active on your application server. To do this, |
| run transaction SM52. If the VMC is not active, contact your SAP |
| administrator. |
Regards
Charles -
How does the integration between CRM and SD occur
How does the integration between CRM and SD occur? Is only via ALE and are there config steps in CRM to ensure the correct data mapping between CRM and SD?
So, if I create an order or quote in CRM how is it then created in SD? Or do they share the same data store.
thanksHi John,
Here is good documentation regarding Data Exchange for Sales Transactions: the CRM Enterprise and the ERP System are two different repositories, If you create the Sales Order in CRM then they will be replicated into SD (using CRM Middleware, BDoc's)
http://help.sap.com/saphelp_crm60/helpdata/en/52/2d0c38941e5666e10000009b38f8cf/frameset.htm
Also you can check the best practice guide for CRM 2007 there you have plenty of information
http://help.sap.com/bp_crmv12007/CRM_DE/HTML/index.htm
Hope this help,
Regards,
Ramon -
How to establish the connection between crm and r/3
Hi,
Sorry for posting this question in this forum, i did not find any CRM forums.My question is,How to establish the connection between CRM and R/3...in my office i installed standard alone CRM system,but it is not talking to R/3.
Could any one tell me where to find adapters and plugins for this.
Thanks in advance.
AjeyHello Ajey,
in the case you mean the connection between R/3 and SAP CRM you should read the Best Practice Guides:
B01: CRM Generation
C71: CRM Connectivity
B09: CRM Replication
from http://help.sap.com/bp_crmv240/index.htm. There is a CRM Forum at http://www.sap.com/community/ and also at http://www.sapfans.com/.
Regards
Gregor -
Multiple address between CRM and IS Retail
Hi Gurus,
In CRM we are maintianing multiple address function for 1 BP but Retail does not has, how to link it between CRM and Retail?
regards
KannanHi All,
The major thing is we should not use ISU as stativ and CRM dynalic system. As we all aware When SAP is launching any module or technology its beleives in re-usabilty.
Now the issue data replecation between CRM and ISU-
1. In a utility market if the customer,retailer and the network operator initiate any business flow they should start with CRM as CRM is handling FOP part.It means CRM has not only build only for ISU.
2. In ISU before billing so many things is getting triggered - like new connecion,transfer,move-in,move-out etc....these process cant be done with the CRM business module as I mentioned earlier CRM is not only designed for IS-U
So for a smoother process and with proper business SAP introduced CRM IS-U.
Without replacting the data between CRM and IS-U we cant process the steps which will at last billed a customer.
Regards.
Abinash -
Difference between CRM and R/3
can anyone clarify on these...
What is difference between CRM and R/3
Also about CRM sales order vs R/3 Sales order why we go crm in this case .First, it is expedient to state that both SAP Business One and SAP R/3 are built on the concept of client/server architecture. So how do they differ? Let's first understand the relationship in a client server setup. A client server is a computer system design standard in which the client machines requests and gets back information from a distribution machine called the server.
SAP Business One as said earlier is based on client/server architecture, howbeit a "2 tier": strictly, clients and server. This technology is often referred to as a fat client. This is because all processing and business logic are carried out on the client.
SAP R/3 is based on a three tier client/server technology. Typically, it is made up of three functionally distinct layers namely: the user interface, business logic and database.
The user interface, which is otherwise known as the presentation server displays the interface for users' communication with the SAP system. It is often referred to as the SAP GUI. As a matter of fact, it is a program called sapgui.exe. The application server is where the business logic and data manipulation takes place. Data processing, SAP administration tasks and client request/feedback management are handled within the business layer. The database layer is synonymous to the database server and it typically acts as a data repository for tables and other database objects and structures.
Ideally, an R/3 system is composed of one database server, one or more application servers and one or more presentation servers. SAP Business One on the other hand is composed of a database server and one or more presentation servers. -
Why replicate Master Data between CRM and IS-U?????
Hello colleagues,
I am at a customer who is already replicating Business Partner and Contract Accounts between CRM 5.0 and IS-U (ECC 6.0).
He is using CRM IC WinClient where most of the processes are implemented as transaction calls in IS-U.
There is a possibility to replicate all objects (Accounts, Connection Objects and Installations) but what is the purpose of doing it.
Could anybody tell me what is the advantage of replicating all objects and having them redundant?
Why to replicate?
I just found information on how to replicate but not why.
Thank you very much for your help in advance,
Edgar KauterHi All,
The major thing is we should not use ISU as stativ and CRM dynalic system. As we all aware When SAP is launching any module or technology its beleives in re-usabilty.
Now the issue data replecation between CRM and ISU-
1. In a utility market if the customer,retailer and the network operator initiate any business flow they should start with CRM as CRM is handling FOP part.It means CRM has not only build only for ISU.
2. In ISU before billing so many things is getting triggered - like new connecion,transfer,move-in,move-out etc....these process cant be done with the CRM business module as I mentioned earlier CRM is not only designed for IS-U
So for a smoother process and with proper business SAP introduced CRM IS-U.
Without replacting the data between CRM and IS-U we cant process the steps which will at last billed a customer.
Regards.
Abinash -
Setting up SSO between EP and back-end SAP systems
Can anybody give me some insight about setting up SSO between EP and back-end SAP systems. If possible some links to write up would be great.
ThanuHi,
This link gives you a detailed information on setting up SSO : http://help.sap.com/saphelp_nw04/helpdata/en/89/6eb8deaf2f11d5993700508b6b8b11/frameset.htm
Some How-guides:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/e676ec90-0201-0010-cfa3-90b7c1291903
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/77378b3d-0b01-0010-ffa5-c6941e286c43
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/80fbc690-0201-0010-1aba-93d5c8232b4a
Regards,
Sunil -
how do I verify my apple id? I can't sign in to it in mail and I can't make a new one because it just will not process I'm trying to set up iCloud between iPad and iPhone and having ALOT of difficulty pleAse help need it done by later on today!!!!!
In order to use your Apple ID to create an iCloud account, the primary email address associated with the ID must first be verified. To do this, Apple will send a verification email to your account and you must respond to the email by clicking the Verify Now link. Make sure you are check the spam/junk folder as well as the inbox. If it isn't there, go to https://appleid.apple.com, click Manage your Apple ID, sign in, click on Name, ID and Email addresses on the left, then to the right click Resend under your Primary Email Address to resend the verification email.
-
Communication between jsp and abstractportalcomponent
Hello All
Communication between jsp and abstractPortalComponent.
jsp contains one input text field and one submit button.
when the user clicks on submit button it will call the component and that input value will
display in same jsp page.
how this communication will happen?
Rgrds
SriHi Srikanth,
In the JAVA File,
OnSubmit Event,
String inputvalue ;
InputField myInputField = (InputField) getComponentByName("Input_Field_ID");
if (myInputField != null) {
inputvalue = myInputField.getValueAsDataType().toString();
request.putValue("textvalue", inputvalue);
request is IPORTALCOMPONENTREQUEST Object.
In JSP File, to retreive the value,
<%
String textstring = (String) ComponentRequest.getValue("textvalue");
%>
In PORTALAPP.XML File,
<component name="component name">
<component-config>
<property name="ClassName" value="classname"/>
<property name="SafetyLevel" value="no_safety"/>
</component-config>
<component-profile>
<property name="tagLib" value="/SERVICE/htmlb/taglib/htmlb.tld"/>
</component-profile>
</component>
Using the code above, You can pass and read values between abstract portal component and Jsp Page.
Instead of this, I suggest you to use JSPDYNPAGE Component for Data Exchange.
Check the [Link|http://help.sap.com/saphelp_nw2004s/helpdata/de/ce/e0a341354ca309e10000000a155106/frameset.htm].
Hope this helps you.
Regards,
Eben Joyson -
Communication between : AP and WLAN controller
Hi,
The communication between AP and WLAN Controller is ( Data and Control ) UDP.
Source port 1024 and destination port 12222 and 12223. Actually which device listen to which port or both should listen as control and data can be generated from both the devices.
How does the user ( wireless client) traffic is switched - if user traffic is a TCP traffic. It will be sent to WLANC and then WLANC forwards it to respective VLAN or default gateway ( depending upon the destination in the packet ).
Please explain / share the experience.
any link on cisco.com
Thanka in advance
Subodh"the LWAPP Control and Data messages are encapsulated in UDP packets that are carried over the IP network. The only requirement is established IP connectivity between the access points and the WLC. The LWAPP tunnel uses the access point's IP address and the WLC's AP Manager interface IP address as endpoints. The AP Manager interface is explained in further detail in the
implementation section. On the access point side, both LWAPP Control and Data messages use an ephemeral port that is derived from a hash of the access point MAC address as the UDP port. On the WLC side, LWAPP Data messages always use UDP port 12222. On the WLC side, LWAPP Control messages always use UDP port 12223.
The mechanics and sequencing of Layer 3 LWAPP are similar to Layer 2 LWAPP except that the packets are carried in UDP packets instead of being encapsulated in Ethernet frames."
Taken from "Cisco 440X Series Wireless LAN Controllers Deployment Guide"
Maybe you are looking for
-
BI 7.0 data load issue: InfoPackage can only load data to PSA?
BI 7.0 backend extraction gurus, We created a generic datasource on R3 and replicated it to our BI system, created an InfoSource, the Transformation from the datasource to the InfoSource, an ODS, the transformation from the InfoSource to the ODS. Af
-
GENERATING ORACLE REPORT IN ADF
Hi, i need to generate offer letter for student. an admin will need to generate offer letter of student bases on their intakeId, branchId, degId, and typeofferletter. currently im doing this in adf form. from here how to transfer the information in a
-
Hi I have a query.. for calculation of % in pivot, SNo|Sub|Total|Lang1|Lang2|%Lang1|%Lang2 1 |AB|180 | 90 |90 | 50% | 50% 1 |AB|180 | 90 |45 | 50% | 25% I have the columns SNo,Sub,Total,Lang1 and Lang2 columns in Pivot, i am not able to calculate for
-
Load Report Failed : The System cannot find the path specified
Hi, I have a .Net windows application and I'm using crystal report in that. Application is published in CITRIX. If I login as Administrator user, reports are generating fine. But for any other user i'm getting following error while trying to open cry
-
I am getting the following error even though the corresponding file is present in the app.jar. This happens when hibernates are getting loaded , when i start the oracle app server. Does anyone knows why its so. Caused by: org.hibernate.MappingExcepti