Steps involved in transporting a query/workbook

Hello Gurus,
What are the steps/objects involved in transporting a query and a workbook to a particular user.
Should roles be transported with them?
Thanks for the help.
Simmi

Hi,
Please check the doc below which contains all about transports in BW.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/3010ba90-0201-0010-2896-e58547c6757e
Also check the help site.
http://help.sap.com/saphelp_nw04s/helpdata/en/38/5ee7377a98c17fe10000009b38f842/content.htm
Regards,
®

Similar Messages

Stepe involved in Transport Value Fields.

Hi all,
I have created a Value field which i have assigned to operating concern. now i want to transport the changes to quqlity system for testing. I am using TCode Ka3i to created transport request. After creating transport request i get CHOOSE DEPENENT OBJECT CLASSES . which fields should i choose to transport the value fields? should i select the structure ABAP Repository Objects as default?
Please provide me step by step process for transporting the value fields.
Thanks,
Naveen

Dear Naveen,
You must be using transaction KE3I. You can select the Operating concern >Execute >Select Structures: ABAP Repository objects.
However, you need to re-concile the Production system with development and ensure that the only intended changes are overwritten.
Kind Regards
Umapathi G

Need steps for transporting a query

Hi friends,
Pls provide me the steps & help me understand.
I have to add a new field "doc_item" to the existing query ''zzmmr_q001'.
Please provide me the steps involved in transport. Also any checkpoints?
Please note that this field 'doc_item' is already existing in the base ODS on which this query is built on.
Regards,
R.Ravi

Hi
Please refer this thread which throws some light on modifications and their corresponding transports.
Query Transportation
Assign points if helpd
Also,
It's enough to go to transport connection in RSA1 of your development system and collect again in a new CR all the objects you need to import in your PRD environment!
for ex.. If you change only a restricted KF, you don't need to transport others than the query and its components from RSA1...
After you collected query objects in Transport Connection, are you able to see your changed objects on the right side of the screen
Collect the changed query in new request in transport connection. Check the consistency of the request before releasing in SE01.
go thru this same post..
Transporting SAP Query Changes??
Thanks

Transport abap query from one client to another--v--urgent---v----urgent

hi,
i have an abap query in one client and want to copy to another client.can i do this if so what are the steps involved .i tried the options like in query go to environment and then to transport .i also tried to do by running the programe RSAQR3TR.but it was transporting in the same client .i want to transfer into another client.plz help me out asap .

hi,
Create a request related to that Table Definition and add data content in the request like
R3TR-TABL-<table name>
R3TR-TABU-<table name>
R3TR-TABD-<table name>
and release the request
Take the DATA files and CO files related to that request in a Pen drive and put the same into the new server DATA and CO files and import using STMS.
For new program, it gets transported along with the program.
For changed program (which has already been transported once), you need to include texts in transport request - just go to Selection texts, save them in the transport request and you're all set.
whenever you assign a request number to the program
and also the selection texts willbe stored under that request number
so when u release the program
the selection texts will also go
after releasing the request if you change only the seleciton texts
only the changes done to selection texts will reach the target
and the rest of the things remain same
so when ever you release a request all the things under that request
will go

How to transport modified query from Dev to QA??

Hi All,
I have made a few changes to a query that has already been transported to QA from Dev. I have removed an Infoobject and introduced a new Infoobject and other such changes.
Now I would like to transport the "new version" of the same query from Dev to QA again so that all the new changes are reflected in QA environment as well.
What steps or procedures do I need to follow for this please?
Thanks for your time,
Regards,
Reddy

Reddy,
BW reporting objects (query / Workbook / WAS tempalte) change transport system is different than other BW development objects (Infoobjects, cubes, transfer/update rules etc..).
Before you start making changes to any Query objects (which are already transported before), first you need to assign the respective Request in the "Transport Connection" tab (click on the BEX with truck symbol icon) and assign your request with the package name.
hope this helps a little..
Good luck
Mavi

Explain the different steps involved in the process.

very simple question.
When you execute a query in oracle what happens. Explain the different steps involved in the process.

Check out the documentation, explains it all:
Overview of SQL Processing

BW query /workbook standards

Friends,
<u><b>Issue :</b></u>
I am trying to develop standards (not just naming conventions) for query / workbook authoring and was wondering how different companies are managing this in their environment .Any help is greatly appreciated .
<u><b>Specific question :</b></u>
1) What are the policies and procedures in place within your company for query / workbook authoring ? Who can create, approvals needed etc.
2) Do you create q's in production or transport from dev to prod ?
3) If q's are transported, what is the approximate. turnaround time for any changes or enhancements ?
4) Any information regarding Organizational structure teams for BW - power users , requirement gathering team etc ..
Thank you in advance.
Hitesh

Karthik,
Apreciate your quick response. The link you provided talks about authorizations in query, I was looking to see how companies have implemented procedures for query authoring and avoid maintenance issue of cleanup of unused queries and workbooks.
Could help if you could discuss strategy, the company you work for uses .
Thanks again.
Hitesh Mehta

RC 8 error while transporting the query from Dev to Qa - Element missing

Hi All,
I have made a multiprovider by copying one existing one.
I have copies one of the Bex queries using RSZC from the source to Target MP.
While transporting the query from Dev to QA i have got the following error. (I have already moved the Multi Prov in a previous TR)
Has anyone seen similar types before. Any inputs will be highly appreciated.
Start of the after-import method RS_ELEM_AFTER_IMPORT for object type(s) ELEM (Activation Mode)
Error when activating element 4LUSZK561QN74UDBJ7BPU9GFM
Element 4LUSZJXHIS1HM7TVDD9DK7HPU is missing in version M
End of after import methode RS_ELEM_AFTER_IMPORT (Activation Mode) - runtime: 00:00:06
Start of the after-import method RS_ELEM_AFTER_IMPORT for object type(s) ELEM (Delete Mode)
End of after import methode RS_ELEM_AFTER_IMPORT (Delete Mode) - runtime: 00:00:14
Errors occurred during post-handling RS_AFTER_IMPORT for ELEM L
RS_AFTER_IMPORT belongs to package RS
The errors affect the following components:
   BW-WHM (Warehouse Management)
Post-import method RS_AFTER_IMPORT completed for ELEM L, date and time: 20110517070045
Post-import methods of change/transport request BDAK959603 completed
     Start of subsequent processing ... 20110517070025
     End of subsequent processing... 20110517070045
Kind regards,

Hi Jith,
First of all try to consolidate all your objects in a single TR and then move to Q from D.
In this case check for the list of objects that you have in your TRs. If TR 3 have all the Objects that were in TR1, TR2, then transporting TR3 alone will work.
Also, you can find the information related to the elements that were missed in your TR1,TR2 by following process.
1. Go to your transport Logs and then to the entries marked as Error.
2. There you will find the Query Element Ids, copy them
3. Now, go to Table(Se16) RSZELTDIR, there enter those query elements.
Now, you can able to find the elements that you have missed in your TRs. Hope this helps you.

What are the steps involved in configuring Oracle EBSR12 after installation

What are the steps involved in configuring Oracle EBS R12 after installation is complete?
We have an empty oracle EBS R12 installed and up and running. We do not have anything configured.
Please direct me to the documents that can be followed to do initial steps for the application functionality to work.
Thanks,
SR

What are the steps involved in configuring Oracle EBS R12 after installation is complete?
We have an empty oracle EBS R12 installed and up and running. We do not have anything configured.
Please direct me to the documents that can be followed to do initial steps for the application functionality to work.All Oracle EBS Docs 11i/R12 can be found at:
Oracle Applications Documentation
http://www.oracle.com/technetwork/documentation/applications-167706.html
Thanks,
Hussein

Steps involved to Configure a Smartform for printing TO Item

Hi,
I want to develop a Smartform to print TO for each Item.
Currently it is being done using SAP Script.
I checked the Configuration in OMLV and assigned my print program Z****** .
This thing here is I don't see any values passed to my program like TO Number, Whse Number etc when called through LT31.
Where as I assign the standard program RLVSDR40 and debug it all the details are being passed to this program.
I am not sure if I am missing any configuration.
Please help me to figure out the issue and let me know all the steps involved in configuring the Smartforms to print Transfer Orders.
Thanks in Advance.
MK.

Hi Murali,
The SAP delivers the solution to print the TO item by SAPScript, but we can do it by Smartform as well, as in
You need to create a project for the enhancement MWMD0001, because EXIT_RLVSDR40_001 will fulfill your purpose of doing it the other ways i.e. via Smart from.
For this you have to use CMOD transaction to create the project for the above said enhancement.
Note: If you do this way any configuration done via OMNU wont't be considered.
Then after in teh import parameters you have a table XRLDRI, which contains both the warehouse number and the transfer order number, the same can be passed on to the designed Smartform to fulfill your purpose.
Sample Code, you can refer to:
*local variable declaration.
   DATA: l_wa_fm_name            TYPE rs38l_fnam.
* Local Field Symbols
   FIELD-SYMBOLS : <l_fs_rldri> TYPE rldri.
* Local Constant declaration
   CONSTANTS : lc_fmname TYPE tdsfname   VALUE 'XYXYXYXY', "Smartform name, here designated by 'XYXYXYXY'
               lc_chk      TYPE rldrudruck VALUE 'X'.
*Moving Transfer Order Print :Item level data into corresponding work area.
   LOOP AT xrldri ASSIGNING <l_fs_rldri>.
* Determine smartform function module
     CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
       EXPORTING
         formname           = lc_fmname
       IMPORTING
         fm_name            = l_wa_fm_name
       EXCEPTIONS
         no_form            = 1
         no_function_module = 2
         OTHERS             = 3.
    IF sy-subrc = 0.
* Call the function module of the smartform
       CALL FUNCTION l_wa_fm_name
         EXPORTING
           user_settings    = lc_chk
           tanum            = <l_fs_rldri>-tanum
           lgnum            = <l_fs_rldri>-lgnum
         EXCEPTIONS
           formatting_error = 1
           internal_error   = 2
           send_error       = 3
           user_canceled    = 4
           OTHERS           = 5.
       IF sy-subrc = 0.
       ENDIF.
     ENDIF.
   ENDLOOP."LOOP AT xrldri ASSIGNING <l_fs_rldri>.
Please validate the same at your end and let me know in case you require any further inputs from my end.
BR/Thanks
Pranav Agrawal

Steps involved in adding USB external HDD to a TC

Please forgive me if this question is somewhere in the forum, I haven’t been able to find it. At least I haven’t been able to find the actual steps involved (but I’m sure that they are probably right in front of me).
Here is my problem. I have a 1Tb Time Capsule, an iMAC, a MacBook, a MacBook Pro. I am running out of some space on my TC and have had to exclude a few directories in order to get it to successfully backup. I would like to back up all of my directories if possible.
After reading the post by Pondini , I http://discussions.apple.com/thread.jspa?threadID=2296894 I see that I can add external USB drives to my time capsule (http://web.me.com/pondini/Time_Machine/TCQ4.html). If I want to add, lets say 2 usb drives and then backup each computer to its own drive. Is it simple a matter of getting a powered usb hub, and then on each individual computer configure its individual time machine backup (system preferences -> Time Machine -> Select Disk? Or do I control all of this from my ‘master’ computer, which is the iMAC? If this is the case, then what would be the steps involved.
Does this question make sense?

JM43 wrote:
Is it simple a matter of getting a powered usb hub, and then on each individual computer configure its individual time machine backup (system preferences -> Time Machine -> Select Disk?
Yup.
Depending on the sizes, you might want to get a single large drive and back up 2 of the Macs to it. You could partition it so each one has it's own space, or let them share the whole drive.
Just be sure to format it/them +*Mac OS Extended+* with the GUID Partition Map scheme.
Or do I control all of this from my ‘master’ computer, which is the iMAC?
No, it isn't a "master." You may use it that way, but only a Mac running OSX Server is considered as a "master." All your Macs are equal.
One suggestion, though; I'd recommend backing the iMac up to a directly-connected USB (or, better, FireWire) external HD. That's much faster and more reliable, and will reduce the amount of traffic on your network.

Steps involved in writing java application on win CE

I want to develop a java application in win CE platform for a handheld device.
1. What are all the steps involved.
2. Is there any simulator available for win CE so that I can run my java application.
Advance thanks,
Regards,
Balasubramaniam.K.R
[email protected]

The way I developed my first app for the Compaq iPAQ
1. Install PersonalJava
2. Build app using AWT classes only (although I think SWING can be used)
3. Screen size 240 x 295 (thats what I used)
4. Compile and run on PC
5. Move to PPC (fingers crossed)
6. You may want to add an app.LNK file (kinda like a *.bat file) to setup classpath and file args
Sun has a compatibility suite you can run against your app to make sure it is PJava compliant. http://java.sun.com/products/personaljava/javacheck.html
Also make sure you don't use classes/methods that aren't supported
There is a PJava emulkation environment, but I never used it.
http://java.sun.com/products/personaljava/pj-emulation.html
...good luck

Steps involved in setting up communication between CRM and R3 / ECC

Hi all,
Can you please tell what are the steps involved in setting up communication between CRM and R3 or ECC.
I know that initially logical systems, RFC connections and other technical settings need to be done by Basis consultants.
From a functional consultants viewpoint, what all config settings need to be done so that data transfer between the systems can take place?
Thanks in advance.

Hi,
There are a series of steps that are to be done...
These include creating sites and subscription in CRM, setting up filters, and number ranges....
All these are in the connectivity guide C71 and replication guide B09.
Refer C71 first and then B09. These would suffice.
You can get these both in the follwoing reference:
http://help.sap.com/bp_crmv340/CRM_DE/index.htm
If you dont get, then gimme your email id, i shall forward these docs to you.
Kindly reward with points in case helpful
Sharif.

Steps involved in picking

Hello all,
I would like to know the steps involved in
1.picking a material from a WM storage type and transfer it to an insterim storage area.
2.Also, i wanted to know the steps invloved in goods issue. Is there any specific movement type and t-code to carry the goods issue.
3. After the stock transfer(putaway/picking) has taken place, what is the t-code to
verify whether the stock are putaway in to the storage type. I used MB52 and MMBE and after confirmaing the transfer order it says "stock for putaway". Does this mean that the stock has been putaway or it is ready for putaway.
Thanks,
Maxx

Hi Max,
Please check my answer below. Reward points if helpful.
What you need to do in WM for transfers is 1) Create Transfer Order 2) Print and apply Labels/Pick Lists 3) Confirm Transfer Order. You can create transfer order directly from LT01 or the preceding document like Material document or outbound delivery.
1.picking a material from a WM storage type and transfer it to an insterim storage area.
- You can create transfer order from outbound delivery with VL03n by selecting subsequent functions/create transfer order.
- You can create transfer order from LT01 if you know the movement type or if it is a warehouse internal movement
- You can confirm transfer order while moving the material to interim area using transaction LT12
2.Also, i wanted to know the steps invloved in goods issue. Is there any specific movement type and t-code to carry the goods issue.
- You can directly carry out goods issue from outbound delivery from VL02n by clicking Goods Issues button or using VL06G for list of outbound deliveries. It would not require any movement.
- You can also perform goods issue on outbound delivery or shipment from RF transaction LM00 or LM61.
3. After the stock transfer(putaway/picking) has taken place, what is the t-code to
verify whether the stock are putaway in to the storage type. I used MB52 and MMBE and after confirmaing the transfer order it says "stock for putaway". Does this mean that the stock has been putaway or it is ready for putaway.
- For putaway after goods receipt, if the system is not conigured for automatic TO creation or Confirmation then, you will have to create Putaway TO using transaction LT06 with material document and confirm it with LT12. Once the putaway is confirmed, you can use MMBE to see material status in IM. In MMBE, you can select storage location and click on Environment/WM stocks. This will display stock at storage type/bin level.
If you see the stock in "stock for putaway, you will have to create/confirm transfer order as stated above. Use LT22/LT23 to find transafer order for confirmation.
Cheers,
Sarvesh

Steps involved in developing an add-on

Hi All,
What are the steps involved in the process of developing an add-on for SAP B One ?
I like to know more on this. Does any one suggest from the scratch what things are required and each step in the sequential order to develop an Add-On ?
Thanks
SV Reddy

Hi Reddy,
1)u have to install the SAP Business One.
2)Then After installing,Start->Programs->SAPBusinessOne->SDK->SDK HelpCenter and Samples will be available.
3)u work it over the samples provided.It helps u a lot
I hope this will help u....:)
Regards
Mohana

Steps involved in transporting a query/workbook

Similar Messages

Maybe you are looking for