Stereo 3D Revelator

Hy,
is it possible to use my old 3d Stereo Glasses with my new graphics card MSI G4Ti4200-8x 128MB DDR. (I have MSI k7N2 Delta Board and AMD Athlon XP 2600 CPU, two 512MB Ram, WinXP)
The glasses worked with Elsa Erazor III (Riva TNT2) a long time ago! With newer drivers I couldn't make them work, which they don't do now too. I installed Stereo Drivers and Card Driver fist from MSI, then tried Nvidia. No idea what to do now.
No help by MSI-Support X( (I got a standard answer, and after replying there, nothing ...)
Thomas Mc Kie

out of luck =SOL

Similar Messages

This might not be revelent :P

This is definetly not be revelent
Whats the software's name to create 3d image(look at the sides when move the mouse over to the left or right)?
When i go to NASAs web sight home page they have this page where u can see each room of the space-ship like 3d. Like u can look at the sides when u move the mouse over to the lefty or the right. And when u click a door... u go to a new page and u can look around when u move the mouse. when the mouse is at the left side, the camera moves to the left and vise versa. I hope u understand what i am trying to saying. I just wanted to ask what software can be used to accomplish this? Thx! (best answer will be given 10 points)

I just got my adapter in the mail, and I am going to have it installed tomorrow. I have a Pioneer 8MP deck and pioneer has a special adapter that you plug into the back of it that has the red and white holes on the other end. Pioneer also sells an adapter that has the stereo holes and a port for a cd changer. It costs about $20 to $30. So I'm guessing Alpine sells one, or some other company has a product that can help you. I'd say sell your cd changer and just use your micro as a cd changer. That's why I got this adapter instead of a cd changer.

IPod no longer works with car stereo since upgraded MBA & iTunes

My iPod classic has worked just fine connected to my car stereo since i bought it last june. I just bought a new Macbook Air (OS 10.7.3) & installed ITUNES 10.6.1. After I synched my ipod for the first time its recognised by the car but i get a "can't read data" message. I re-formatted my ipod but its exactly the same. Do you think its the upgrade- or the cable? Has anyone else found a bug with this version of Itunes or the OS? I have my doubts a cable would make the difference, and my old ipod nano that i haven't synched for a while works fine.

If standalone works fine, then, most likely the 30 pin connect may have some dirt or lint, prevent data transfer.
You can try to blow it clean, if you have a can of compressed air or gas.
Alternatively you can connect it to the car stereo and do the RESET, while connnected.as follows
Toggle the Hold switch, make sure you dont see the red mark when you do the next step
Reset the iPod -> Press Menu and Center button simultaneously for about 10 secs or till the Apple Logo comes ON
Then release the buttons
Select your preferred language.
Here is the Apple support Article on the 5Rs
http://www.apple.com/support/ipod/five_rs/classic/
The Reset sequence may send a signal to the Car stereo to do the right thing

When creating new track in stereo... track opens in mono in arrange window

Since upgrading to 8.0.2...weird things are happening to previously saved projects. Stereo tracks are opening up mono and affecting following track. When creating new tracks in stereo.... tracks open mono. I don't know if this is due to 8.0.2 but all these freaky things have happening since. Also, when previewing Apple Loops, I can only hear it on one side, but Loops sounds fine once dragged to arrange window. Is this common or is my computer haunted ? Should I call Ghost Busters ? HELP !!! lol

Hi there,
I'm having the same problem as well: creating new tracks results in a mono software instrument, not the usual stereo software instrument. BUT... "Universal Track Mode" is already checked in my Audio prefs. I unchecked & rechecked it, but to no avail... I'm still only getting mono software instruments.
Any other ideas? No changes have been made to my system, and I'm running the latest version of Logic Pro.
Kirby

FAQ: How do I edit photos in Revel?

Start by installing Adobe Revel to your iPhone, iPad, Mac, or Android device. Tell family and friends who will be
viewing your Adobe Revel photos to install the apps, too.
When you're sharing photos with friends and family, you want them to look their best so that everyone gets to experience and enjoy the moment as much as you did. That’s why we built intuitive and powerful editing tools right into Revel. Make every moment look exactly how you want to remember it with ease.
Editing Photos in Revel
You can edit a photo on your Mac, iPad, or iPhone using Adobe Revel. Changes are saved to your photo library, so
the photo looks the same on any device. The Revel cloud keeps a copy of your full res originals. Edits in revel are non-destructive, so your original is always preserved (unedited). When you export photo (MAC) Save to Camera Roll (iOS), that's when Revel applies your edits. On iOS the preview is used. on MAC the full resolution of the original is used to generate the new edited photo.
Add adjustments to your photos
Go to the photo you wish to edit.
Click on the +- Edit button on the bottom center of the page on the iPad or the iPhone.
Select a preset adjustment look or adjust red eye, crop, or rotate.
With Revel’s intuitive and powerful editing tools, it’s lots of fun to make your photos look better. Crop and use one-touch filters to get professional results with ease, or use the adjustment sliders when you want to experiment with lighting, color, and sharpness.
Use the crop and red-eye removal tools help you create the perfect memory by eliminating unwanted parts of a photo. And when you have a special memory, use the advanced controls in Revel to give it a look all your own.
Edits you make to a photo appear when you view the photo on any device. Because Adobe Revel saves the edits as separate instructions rather than as changes to the original photo, you can always undo any edits you've made. For example, you can select a black-and-white look, and then if you change your mind, tap or click Undo. If you make a series of edits and then change your mind, tap or click Cancel.
To improve lighting or contrast, tap or click Adjustments. Drag the White Balance, Exposure, and Contrast sliders to achieve the effect you want. Tap or click the two-way arrows (see image below) for additional sliders that give you finer control
Looks: Turn a photo into an amazing photo with a single tap. With 24 different photo filters it's easy to create a photo that will impress your friends and family.
Adjustments: Use the advanced controls to adjust the color, lighting, and sharpness of your photos.
White Balance: Adjust the temperature & tint
Exposure: Corrects the exposure, highlight & shadow
Contrast: Adjust the contrast, clarity & vibrance
When clicking on "Compare", you can see the before and after preview of the changes that you made. If you want to reset your changes back to
the original image, just click "Undo"
iPhone Users: There is an "undo" button and "compare" button so you can see the before and after result for adding an adjustment to your image.
Red Eye
Using Revels Red Eye removal is easy. Just click on the "Auto Detect & Correct" or click on the persons eyes in your image as Revel will automatically correct the red eyes.
Crop & Rotate
Crop: To remove unwanted areas of the photo, tap or click Crop & Rotate. Drag a corner or side of the frame to resize it. Drag the photo itself to reposition it. Pinch your fingers open to zoom in on the photo within the frame.
Rotate: To rotate the photo, tap or click Crop & Rotate. Then, tap or click the Rotate Left or Rotate Right icon; or tap or click the Flip Horizontal or Flip Vertical icon.
Actions Menu
Add Photo to Album: Add your photo to a new album or existing album in your library
Export Current Version: Exports the current version of the image that you have applied any adjustments to
Export Original: Exports the original image with out any adjustments applied.
Duplicate Photo: Duplicates the photo & stores the image in the same library.
Copy to Clipboard: This will copy the image to your computers clipboard, then you can paste your image into various applications like Elements 11
Iphone Users: You can share your photos via e-mail or upload your images directly to Facebook, Flickr, Twitter & Tumblr.
Actions Menu
Add Photo to Album: Add your photo to a new album or existing album in your library
Save Current to cameral roll: Exports the current version of the image that you have applied any adjustments to
Save Original to cameral roll: Exports the original image with out any adjustments applied.
Storing your original photos When you import a photo, Adobe Revel uploads a copy of the original to the cloud.
By default, Adobe Revel also stores a copy of the original on your computer in /Pictures/Adobe Revel Library
The files are stored in a "package" titled Adobe Revel Library. Control click on the package and select "Show Package Contents" from the menu. Then you will be able to view the images in the finder window.
Favorites
When working with a single photo, click on the "STAR" to mark your photo as a favorite. The image will show with a star under the "Favorites" in your Revel library.
Add captions to your photos
Create lasting memories by preserving all the info and details related to each of your photos.
Deleting photos
Be careful! Deleting a photo removes it from Revel on all your devices, not just the one you're working on. Make sure you really don't want the photo anymore before you delete it.
For example: If you delete the image on your phone or iPad, the image will also be deleted from the Adobe Revel Library in the /Pictures/Adobe Revel Library directory on your computer. Its always a good practice to back up your images to a location on your hard drive.

Please study this, then come back with more specific questions
Learn Photoshop Elements 12 | Adobe TV
Learn Photoshop Elements | Adobe TV
Use of the tools is pretty much the same in all versions of the program.
"Edit" is a menu item in Photoshop Elements Editor. Don't you see this?

FAQ: How do I share files in Revel?

SHARING OVERVIEW:
In Revel, you can share links to albums which allows others to view photos and videos from a web browser at adoberevel.com. Revel also supports sharing in a variety of other ways, by email, facebook, twitter, message, etc. In addition, users can create libraries and invite other revel users (such as close friends and family) to collaborate in a group library. Collaborative users in a group library can add photos and videos, make comments, and favorite photos and videos.
SHARING PHOTOS AND VIDEOS ON SOCIAL MEDIA
Users can share specified photos and videos on social media sites such as facebook and twitter. They can also post a link on social media sites that will take users to view an album on adoberevel.com in their browser.
SHARING LINKS TO ALBUMS (Recipient does not need a Revel account)
General sharing in Revel is done by sending a link to an album to others so that they can then click on it or paste it into a web browser in order to access your Revel album online for viewing and downloading files (You can enable or disable downloading for each album). If you want to share a particular photo, you can view an album in the browser, then select the photo of choice, and then copy the url in the browser bar and send that instead. Users will still have access to the entire album, but it will open one specific photo.
SHARING VIDEOS
In iOS, you can share a video by tapping on the video to bring it up in full screen view (loupe view). Tap on the arrow on the upper right hand corner and pick "share". You can share via message, twitter , or email. Alternately, you can select the arrow and pick share to facebook.
In adoberevel.com, videos must be put into an album and then a link to the album can be shared as described above in “Sharing Links to Albums”
Video is not yet supported in the Mac and Windows 8 versions of Revel.
GROUP LIBRARIES (Recipient must have a Revel account)
Revel users have the ability to create additional libraries, and the option to maintain them collaboratively with selected trusted users. This feature allows multiple users to login to Revel and access a "GROUP" library. The owner invites other users to participate in his/her group library by email invitation. Users who participate in a group library will have access to the library when they login to their own accounts. They can add and edit files, and remove files that they have added, but cannot delete files that others have added.
See this link for a great overview to get started with Revel. Note the tab for apple vs windows platforms:
http://www.adobe.com/support/revel/gettingstarted/revel_gs.html
Revel 1.10 for Mac
Share individual photos
On a Mac, you can export or copy versions of the photo to use in other applications. Click the actions icon and select export current version or export original. In addition, in full screen view (loupe view) for one photo, click the actions icon, and select share on Facebook, Twitter, Flickr, message, or Airdrop.
Share an album
Share a link to an album: From Album view, click on the sharing icon and click Share This Album > Copy Link. You can enable downloads by setting the Allow Downloads slide to on.
Invite others to participate in a Group Library
In Mac version 1.10, click on the gear to bring up the library listing. Click on the > symbol inside the blue circle. In the SHARING WITH section, click on the + in the green circle to add a user. Just insert the email (adobeID) that they use to log into Revel. This will send them an invitation to participate in the group library and once they accept, it will appear in their revel library list .
Revel 2.1 for iOS- (iPad, iPhone, & iTouch)
Share individual photos
On an iPad or iPhone, you can share a photo on Facebook, Twitter, or through email. Tap the arrow in the rectangle icon and choose share, then select either email, facebook, or more for options.
Share an album
From Album view, tap on the arrow icon and then tap on Album Settings. Slide to turn Share via adoberevel.com ON. You can enable downloads by setting the slide to ON. Then, click Share Link... You can share via email, message, or twitter (if logged in) or copy the link to send to anyone.
Alternately, click 'View in Browser' to copy the URL for sharing. After clicking 'view in browser', you must tap on the browser bar to see the link, then tap again on the url to highlight it in the browser bar. Choose 'copy' and you can then paste it into your destination (email, facebook, twitter, text message, etc...)
Share a video
Tap on the video you want to share to bring up full screen view (loupe view). Tap on the arrow in the top right corner and select "share". Select message, facebook, twitter, or email.
Invite others to participate in a Group Library
ON iphone/ipad version 2.1:
If you are in a library or album, then click the icon of 3 parallel lines to get to the library listing. Tap the 'i' with the circle around it next to the name of the library that you want to invite others to join.
In the SHARING WITH section, click on the "+" in the green circle to invite users to join this library. Just insert the email (adobeID) that they use for logging into Revel. This will invite them to participate in the group library. It will show in their library list when they login and accept the invitation, and they will be able to add files to it and view it's contents.
Windows 8 Revel version 1.0
Share individual photos
When viewing photos in either a library or album, swipe down or right-click on one or more photos to select them. If it is not already visible, swipe up from the bottom of the screen or right-click to display the App bar. Tap or click Share to Facebook on the App bar. Alternately, you can share photos through email or other apps already installed on your device. To share, swipe from the right edge or scroll your mouse to bottom right and the share charms will appear. Click share and all of the apps available for sharing from your device will be displayed. Tap on the app to choose where to share your photos/videos.
Share an album
Tap or click on the word albums to get to album view. From the album view, tap or click on an album to open it. Swipe up or right-click to display the app bar. Tap or click Album Settings. In the Web Share section, you can move the slider to turn Share via adoberevel.com ON. If you wish to enable download, then you can move the slider for Allow downloads to ON. You can then choose from the two options that display, Share Link (which opens share charms) and View in Browser.
Invite others to participate in a Group Library
From the library view, tap on the library settings icon in the bottom right. In the SHARING WITH section, click on the "+" to invite users to join your group library. Insert the email (adobeID) they use to log into Revel. This will invite them to participate in the group library. The group library will show in their library list when they login and accept the invitation, and they will be able to add files and view the library's contents.
Elements 12
Share an album
In the left pane, click the icon next to the album.
Click Start Sharing.
Note down the URL displayed on the next screen. You can email this URL to friends with whom you want to share the album.
Invite others to participate in a Group Library
In the left pane, click the icon next to the library name.
Enter the email address of a collaborator you would like to invite and click Add. Elements adds the new group members and prompts you that the invitation is pending acceptance.
Invite more group library participants if desired.
Click Done.
Premiere Elements 12
Privately share your video on Revel :
Using Premiere Elements 12, you can upload your video story to Revel. Once you have created your project on timeline, you can click on Publish+Share option. Select Private Web album there. Using this option you can upload your edited video story on Revel. You get the link of video on Revel which you can share with your friends and family.
Adoberevel.com from a web browser
Share an album:
From the Album view, click on an album to select it. Click on the globe icon and then on Start Sharing. to share via adoberevel.com. Turn the slide ON if you want to enable downloads. Click on Facebook, Twitter, or Google+ icons to share an album there. Click on View Shared Album to see the album in a web browser and copy the URL to send to others so that they can see your album. After clicking 'view in browser', you must highlight the url in the browser bar and copy it (ctrl c in windows, cmd c in mac) and you can paste it into your destination (email, facebook, twitter, blog, other social media etc...)

Hi Gábor,
It is possible you are sharing the wrong URL. This wouldn't surprise me as the FAQ is terribly confusing. I am going to re-state how to share an album with friends.
To share an album from adoberevel.com:
1. Go into your Library and create an album with whatever images you'd like.
2. While in the album select Share. A dialog displays - select to Start Sharing
3. After that another dialog displays with a short URL. Copy that URL and send it out via email or use one of the share icons that display on that screen. You can also select from that screen if you want people to be able to download images.
You can select to stop sharing the album at any time by going back to that same dialog and select to Stop Sharing.
If you want to share an album through the Revel Desktop:
1. Go into your Library and select the Album icon (or go to File>New Empty Album
2. Enter a name for you album. Select the Share to adoberevel.com checkbox. You can also decide if you want to allow downloads here.
3. A short URL will be generated. You can copy that now if you'd like or come back to it. Select Create button.
4. Add photos to the album.
5. Click on the album in the list and a little " i " will display next to the album name. Click on it and the URL will display. That is the URL that you share.
Again, you can select to stop sharing the album at any time by going back to that same dialog and select to Stop Sharing.
Glenyse

FAQ: Where can I learn tips and tricks about Revel?

Tips, Tricks, and less known features in Revel (iOS)
VIEWING FILES:
From Library view, you can tap on SHOW and select to view the files by grid, dates, events, who they were added by, and by tags.
From Library view, tap and hold on the bar at the top of your screen (where the clock is) to go to the top of the library of photos.
From Library view, tap and hold on the library icon (bottom left icon) to go to the bottom of the library of photos.
From Library view, for dates, events, added by, and tags mode (found by tapping show and selecting one of these options), you can swipe down and near the top of the screen you will see choices for ALL, PHOTOS, VIDEOS. You can display all, just photos, or just videos by selecting the appropriate choice.
SELECTING FILES:
From Library mode, you can easily select several photos in a row. Tap on SHOW and select GRID mode.Tap on the arrow in the top right corner and select add to album, share, save to camera roll, or delete. Then swipe your finger across several photos to select them in a row. You can still scroll up and down and add more.
From Library mode, you can easily select all photos from a particular date. Tap on SHOW and select DATES mode.Tap on the arrow in the top right corner and select add to album, share, save to camera roll, or delete. Then tap on the grid of 9 squares to the right of the number of photos for that date. This will select all photos for that date.
CHANGE THE DATE OF A PHOTO:
From library view, you can touch and hold your finger on a photo to bring up a menu that allows you to change the date of the photo.
SETTING AN ALBUM COVER PHOTO:
- Select album view
- Select album
- In album, long press on a photo (touch and hold)
You will see an option to select the photo as the cover.
EDITING FILES:
After making edits on a photo,
if you touch and hold your finger on a photo after making some changes, you will get a context menu with otions to Cancel Changes, Revert to Original, and Duplicate Photo.
CLEARING CACHE:
If you have uploaded a ton of photos from your ios device, tapped a lot of photos view a larger image, or edited many photos, you might be able to reclaim some space on your device by clearing the cache. You can tap on the 3 parallel lines in the top left corner to get your list of Libraries, tap on the i inside the circle to the right of the library, and tap on CLEAR CACHE to reclaim some space. Your small thumbnails will remain since they don't take up a lot of space and can viewed quickly.
AUTOIMPORT
You can set your iphone or ipad so that it will automatically upload new photos, screenshots, and videos from your camera roll to revel. To set this up, tap on the 3 parallel lines in the top left of the screen. Then, tap on the gear for settings. You will see Import and Upload: Auto-Import. Tap on AUTO-IMPORT and choose which library you want to import into. Choose none to disable this. You have the option to autoimport videos also or to disable that choice. Slide the option to on if you wish to import videos also.
CAPTIONS
When you tap on a photo and go into loupe view, you can tap on the pencil icon to add a caption. This caption will display on the photo when it is viewed.
FAVORITES
When you tap on one photo or video to view it in loupe mode, you will see a heart in the bottom left corner. Tap on this heart icon to indicate that the photo is one of your favorites. If you share a library collaboratively (see link on sharing below) with your family or others, then they will get a notification (if enabled) that you have favorited a photo.
COMMENTS
When you tap on one photo or video to view it in loupe mode, you will see a speech bubble next to the heart in the bottom left corner. Tap on this icon to add a comment on the photo. If you share a library collaboratively (see link on sharing below) with your family or others, then they will get a notification (if enabled) that you have commented on a photo.
To delete a comment, swipe from right to left in the list of comments and then select delete to remove the one you want gone.
EVENTS
If you are in library view in date mode (found by tapping SHOW, DATES) tap the pencil icon to add an event name for the group of photos. When you ask to SHOW by EVENT, these will be displayed.
ACTIVITY VIEW:
If you tap the bullhorn icon on the bottom right of the screen, you will see activity view. This view shows recent activity in a library such as who added new photos, made comments on photos, put photos into an album, or marked a photo as a favorite, and when. This is particulary useful when you share a library collaboratively with family members and you want to see who did what.
Tips, Tricks, and less known features in Revel (adoberevel.com)
SETTING AN ALBUM COVER PHOTO:
For web browser:
- Select album view
- Move cursor over the album
You will see an edit icon appear in the upper right corner
- Select the icon
- Go into album and click on the photo that you want as the cover. It will then become the album cover
KEYBOARD SHORTCUTS:
Adoberevel.com now has keyboard shortcuts in loupe view. Click on a photo to get into loupe view. In most cases when viewing both photos and videos, the following keyboard shortcuts are available:
'f'       toggle favorite
'left'   previous
'right' next
'c'      edit caption
When you play a video, the following video-specific keyboard shortcuts are available:
'space' toggle play/pause
'home'   seek video to start
'0'          seek video to start
'm'         mute video
'='          increase volume
'up'        increase volume
'-'           decrease volume
'down'   decrease volume
Other General Revel How To's
SUBSCRIBE
FAQ: How do I subscribe to Revel Premium?
UPLOAD
FAQ: How do I add (upload) files to Revel?
SHARE
FAQ: How do I share files in Revel?

auzbee,
You can start by taking a look at the "Service and Troubleshooting Guide-ThinkPad T61" and "ThinkPad Safety and Warranty Guide" booklets that come with the machine.
Centex

How can I shuffle a playlist in iTunes for an iPod so my stereo play a large playlist in a seemingly random order

I have an iPod classic that I plug into my car stereo. My car stereo can play playlists, or if just plug it in, it will play every song in alphabetical order. Once plugged in, I cannot use the iPod to "shuffle". I require a pre-shuffled playlist. I have done this before in iTunes 11 will special instructions, but I've since misplaced those instructions. I know how to build a large playlist of all of my songs. Now, how do I shuffle that list of, say, 20,000 songs, and save to a new shuffled playlist? Don't say it can't be done, because I've done it. I know Apple removed the ability to do this quickly and easily, because obviously Apple doesn't really take their customers wants and needs into account. Otherwise, they would see the thousands of complaints after they removed that feature.
So, is there anyone here that can help me? I don't really need to hear that it's not supported or that it used to work. If you know how to shuffle a playlist and save it in that shuffled state, please post the steps for doing this in Windows iTunes 11.
Thank you in advance,
Bluemookie

Just go to Settings, Shuffle, then turn it to Songs. The songs will stay in the same order in the playlist, but they'll switch it up.

Is there a way to create a project with custom audio settings that are NOT only "Stereo" or "Surround"?

Is there a way to create a project with custom audio settings that are NOT only "Stereo" or "Surround"?
Thanks!
-Adrian

the old apps are on my computer but they have had upgrades since they were put on the ipod originally. you think you would get a warning about this when you restored. I was not worried about losing the progress of the apps but i would have been worried about the app it self!!!!!

Is there a way to connect two analog mics recording in stereo to the iPad for recording?

I currently use an M-Audio Mobile Pre to connect two microphones to my MacBook Pro via USB. If I wanted to use my iPad (or even iPhone) instead, is there a way to get the stereo input into the iPad? Would the Line 6 Sonic Port sold via Apple work? Would it take 2 separate inputs and deliver stereo to Garage Band or another recording app? Or is there another way?

Exactly that -- the procedure is described in the online Help: InDesign Help | Text variables
Now every time you insert the variable named "# of potatoes", you'll see the text "50" appear (with a minimal rectangular marker to indicate it's a variable), and when you want another number of potatoes, all you have to do is adjust the text in the Variables dialog.

Is there a stereo bluetooth headset that can pair with more than one device at a time?

Is there a stereo bluetooth headset that can pair, i.e. multipoint, with more than one device at a time?
Are the MacBook and iPhone 4 capable of multipoint bluetooth technoloagy?
The goal is for my wife to be able to watch her Korean TV soap operas on her MacBook and still receive a call on her iPhone 4 via a stereo bluetooth headset.
I was looking at the Motorola S10-HD but after further review saw that it only pairs with one device at a time.
Appreciate any and all input. My Googling has returned no results.
Rick

TeslasBB wrote:
pairing my BB8330 with my blue tooth earphone(TM:jawbone) and my microsoft sync thats in my car simultaneously? if i pair with the car, will i have to pair my jawbone all over again?
You can only pair one device at a time to your 8330, or any other phone for that matter. The "pairings" are saved to the phone, you can use one or the other and you won't have to pair it again. Once you turn your bluetooth device on and the phone is on, they will find each other again.
Hope this helps,
John
Stevie Ray! 1954-1990
** Don't forget to resolve your post with the accepted solution.

After an update, my touch is no longer recognized by iTunes or USB input on car stereo

Formerly I was able to connect my touch to both iTunes (Windows) and through USB on my car stereo (Kenwood). After updating the touch's IOS I cannot connect to either. I am able to connect to the car stereo through blue tooth. I did open an iCloud account for the touch but I doubt that is a factor. I have tried turning the unit completely off and that does not help. I uninstalled iTunes and reinstalled it making certain I used the 64-bit version. It is still not recognized. Any ideas on what to try next?

As it turns out, this was a hardware failure. One of the pins on the bottom connector was bent and caused the problem. What burns me is the problem initially showed itself after updating to ios 5.0.1. I tried a reset over the weekend (including deleletion of my entire music collection) to no avail. I took it in to the local Apple store today and they essentially turned it into a paper weight. After putting it into recovery mode the unit would no longer turn on at all. Unfortunately they wouldn't replace the unit for free because it was 11 days out of warranty. I could have lived with the Touch with all my music on it, but it was worthless after the music was deleted. I feel like they should have replaced it for free. I was planning on upgrading to the next iPhone but this has shaken my confidence (as well as irritating the living **** out of me).
To be fair, Apple did replace the player at a reduced rate. That was better than nothing.

TS3581 After installing OS 7 my iPhone is no longer recognized by car stereo even though it is hard wired in. It doesn't even charge! What gives?

After installing OS 7 my iPhone is no longer recognized by car stereo even though it is hard wired in. It doesn't even charge! What gives?

You clearly did not notice that you have joined a USER TO USER COMMUNITY FORUM
This is NOT Apple ,Apple do not read nor do they therefore respond
So if you would like to wind your neck in ........................
try a reset of iPhone and then a restore,best, as new and if it then functions correctly try restoring with your backup

After iOS5 update, iPod no longer connects to car stereo

Hi,
my husband and I both have an iPod touch 4th generation.
We also have a Dodge Caravan with a car stereo, that lets up hook up the iPods and control them over the display. The cable does not charge the iPods, but we knew that.
I have updatedt my iPod a while ago and never encountered any problems with the car stereo.
My husband updated his iPod to iOS5 today, and the car stereo does not connect via the cable. On the iPods display it just says, an error has ocurred.
Would that be a hardware issue? The iPod is a month or two past warranty. We already tried restarting and resetting the iPod (not to factory settings).
Is there maybe a way, to return the iPod to iOS4?
Thanks for any help

Sometimes, when you cannot "see" your ipod, it is because the drive that was assigned to the ipod, when you connected it, is already being used by the other devise. Your ipod is connected, but is "under" the other item, which means that you have to disconnect that item, so that you can "see" it. It will not be one of the drives that are normally associated with the computer like the C drive, or the ones assigned to your disc drives. It would be a drive that was assigned to an external devise, or another USB devise. This may or may not be your problem, but it is worth a shot.

Car Stereo No Longer Recognizes iPhone after iOS 7.1 Update

I connect my iPhone to my car stereo with via USB (the stereo doesn't have bluetooth) and now after the iOS 7.1 update, it no longers works in my car. My stereo displays an error message of 'iPod err' when I connect it. I've used this same car stereo and USB cable to connect my iPhone for years without any issues, until the 7.1 update a couple days ago.
Anyone else having this issue? This is real frustrating.

In another thread on this issue, Brendan writes:
Turns out restarting my car and/or rebooting my iphone "fixed" the issue. Apparently this was unrelated to the iOS 7.2 upgrade. Honda + iPhone has been rock solid (even if the Honda Fit UI is terrible), so I'm not sure what to make of this problem. Maybe a glitch? Who knows.
Here is the URL for that thread: https://discussions.apple.com/message/25211736?ac_cid=tw123456#25211736
His suggestion worked for me: turn off your car, completely shut-off your phone and let it sit a few minutes. Then reboot phone and start car and try again.
Good luck!

Stereo 3D Revelator

Similar Messages

Maybe you are looking for