Stickies

I hold lists of figures on stickies. Is there a way of totaling these figures without recourse to the calculator? A bit of nifty software perhaps? Any ideas welcome. Many thanks
G4 ibook Mac OS X (10.3.2)
Cube Mac OS 9.0.x
G4 Cube Mac OS 9.0.x

Use the Find option in the Edit menu to replace all instances of a carriage return with the + symbol, select all the text in the sticky, and then press the Shift, Command, and 8 keys simultaneously. To place a carriage return into the Find dialog box, click just before the start of one line, and press the Shift key while clicking just after the end of the previous line.
If you want to preserve the original text as well, copy it to the clipboard before pressing the keys, and paste it back in afterwards.
(14839)

Similar Messages

Firefox can't open normally without going through the "this is embarrassing" routine; nor does it close down properly; it also sticks frequently, i.e. screen freezes for a minute or more; should I uninstall and re-install to try and debug?

Firefox can't open normally without going through the "this is embarrassing" routine; nor does it close down properly; I get the "end program" message and have to say "end now"it also sticks frequently, i.e. screen freezes for a minute or more; should I uninstall and re-install to try and debug?
- I've used Firefox exclusively for around 2 years.
- My outlook express has no problems
- other programs seem unaffected; it seems peculiar to Firefox.
- my main use is surfing the net, primarily entering competitions on line via specialist competition sites.
- every day at some stage(s) I have to switch computer off as Firefox has got very slow/sticky/freezes.
I'm not techy by any means, but I can only thing of un- and re-installing to hopefully start with a clean slate.

Sounds like something is keeping Firefox from closing properly. See this: <br />
https://support.mozilla.com/en-US/kb/Firefox+hangs#Hang_at_exit

Can no longer write to USB stick when formatted as FAT/FAT32

I had about 2GB worth of mixed content on an 8GB stick, which I use daily on my Mac (OS X 10.6.2) and at work (XP).
I copied all the files off it onto a folder on my Mac so I could use it to transfer some big files to my mum's laptop (Windows 7).
Having finished the job, I formatted the stick in OS X as FAT, but when I tried to copy my files back, I got an Error Code -36 when writing one of them. I tried formatting the stick in Windows 7 as FAT32, and got the exact same problem.
I then formatted it as Mac OS Extended in OS X (after doing a Verify & Repair), and this time the files all copied across to it perfectly. However when I plug the stick into Windows 7 now, it doesn't show up.
I tried formatting as FAT again in OS X, but again the files won't copy and give an Error Code -36
Any ideas?
Thanks

markmc78 wrote:
I formatted the stick in OS X as FAT, but when I tried to copy my files back, I got an Error Code -36 when writing one of them.
Two things to try: (1) On your Mac in Disk Utility, verify that the "Partition Map Scheme" of the USB drive is set to "Master Boot Record". If it's not, repartition the drive to have that scheme. (2) Format that USB drive in Windows.

System Preferences no longer stick after 10.10.1 update

I've upgraded from OS X 10.10 to 10.10.1 today.
The upgrade caused various system preferences to change, and now I cannot change them back.
While System Preferences.app seems to accept my changes, they are reverted after I quit and restart System Preferences.
For example:
Language & Region:
- I used to have various languages in the list of my preferred languages. Since the update, only German remains in the list. Adding other languages does not stick.
- My Region is set to Germany - English, which causes german text but english number formats to be used. Changing the number format to german does not stick.
General:
- When I click the scroll bar, this now causes the document to move by one page. I used to have the other setting (move to that location), but cannot reenable that.
- Windows are now closed upon quitting applications. I don't want this, but removing the check box does not stick.
Does anybody have an idea what the root cause may be and how to fix this?
With kind regards
Piers Walter

Back up all data before proceeding.
This procedure will unlock all your user files (not system files) and reset their ownership, permissions, and access controls to the default. If you've intentionally set special values for those attributes on any of your files, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. Do so only after verifying that those settings didn't cause the problem. If none of this is meaningful to you, you don't need to worry about it, but you do need to follow the instructions below.
Step 1
If you have more than one user, and the one in question is not an administrator, then go to Step 2.
Triple-click anywhere in the following line on this page to select it:
sudo find ~ $TMPDIR.. -exec chflags -h nouchg,nouappnd,noschg,nosappnd {} + -exec chown -h $UID {} + -exec chmod +rw {} + -exec chmod -h -N {} + -type d -exec chmod -h +x {} + 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window by pressing command-V. I've tested these instructions only with the Safari web browser. If you use another browser, you may have to press the return key after pasting.
You'll be prompted for your login password, which won't be displayed when you type it. Type carefully and then press return. You may get a one-time warning to be careful. If you don’t have a login password, you’ll need to set one before you can run the command. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
The command may take several minutes to run, depending on how many files you have. Wait for a new line ending in a dollar sign ($) to appear, then quit Terminal.
Step 2 (optional)
Take this step only if you have trouble with Step 1, if you prefer not to take it, or if it doesn't solve the problem.
Start up in Recovery mode. When the OS X Utilities screen appears, select
Utilities ▹ Terminal
from the menu bar. A Terminal window will open. In that window, type this:
res
Press the tab key. The partial command you typed will automatically be completed to this:
resetpassword
Press return. A Reset Password window will open. You’re not going to reset a password.
Select your startup volume ("Macintosh HD," unless you gave it a different name) if not already selected.
Select your username from the menu labeled Select the user account if not already selected.
Under Reset Home Directory Permissions and ACLs, click the Reset button.
Select
 ▹ Restart
from the menu bar.

Making a Windows 7 Installation USB Stick

This is a discussion of making a bootable Windows 7 Installation USB-stick Media. It might apply to making other USB connected "Disks" like Smartcards bootable too.
I recently had to do this (a Laptop with no build-in DVD drive and no USB DVD drive around). And it turned out to be surprisingly simple, using nothing but build in Windows tools from the Disk. I only found
this german langauge guide and nothing in english (but I might just have searched after the wrong terms, google has been wierd regarding langauge lately), so I thought I write it up (along with some problems I ran into).
Making a USB-Stick into a bootable Windows 7 (and propably Vista) Media is a 3 step process:
1. Create a Active, Primary, FAT32 Partition of 4+ GB on the stick
2. use bootsect.exe from Windows Disk to create the MBR and Partition Boot Record for that Partition
3. Copy all files from the Disk to said Partition
4. Test if it boots
Detail analysis:
Step 1 is so simple I doubt it needs explanations. Create enough free space on the USB disk (at worst delete all previous Partitions). Make a Priamry Partition of 4+ GiB. Mark it as Active. Format it in FAT32. The Guide used Diskpart,
but this step can be done with any Partition Tool under any Windows, Linux, UNIX or DOS.
While the choice of FAT32 seems a bit outdated, theye propably did not gave the relevant bootlaoder the ability to read NTFS. Or maybe they just though FAT32 is enough for a media that is mostly read. I have not tried what happens if I format it in NTFS, but
it might be possible.
Step 2 was the only tricky part. You need the programm "boot\bootsect.exe" from the Installation Media. It also must be run on a non-UEFI booted OS (otherwise it cancels out).
I had a Windows 8 on a new Laptop so I had a UEFI booted system. Luckily I also had a VMWare Windows 7 lying around. I just assigned the Windows 7 ISO image to the Windows 7 VM, then connected the USB drive to the host.
Once you have the USB stick in a a proper Windows mount the Parttion you created under 1 under any driveletter (should happen automatically under Windows), and open a console as Administrator (asumes DVD is drivletter is D: and the USB stick's partition
ins Driveletter E:):
//Go into the boot directory on the Install DVD
D:
cd boot
//You should see a command promt like "D:\BOOT>"
//Run bootsect.exe
bootsect.exe /nt60 d:
Step 3 is to either copy the contents of the DVD media (copy and paste) or the Image (Mount into Virtual DVD Drive and copy/paste, unpack ISO images contents) into the partition.
How does this compare to other Distribution ways?
To DVD:
There is no need for a DVD drive. Even if a bootable USB-DVD drive is avalible, the Stick or Card will only need only USB port (most USB drives need 2 Ports due the 1 Ampere energy need of the drives).
Flash Media has no seek times and much better throughput (the old weakpoint of any Disk and DVD/CD in particular)
A FAT32 partition is inherently writeable. So modifications to the "Installation media" like Implementing Service Packs and other Windwos Updates, Modifying ei.cfg/preactivation/setup answer files, implementing special Disk/RAID drivers into the Windows
PE or adding stuff that should be installed with Windows is easy (and do not requrie reburning a 4 GiB Image file).
Since it only needs a 4 GiB partition, on a big USB stick there would still be place for other Data Partitions
Since it relies on old techniques (Generic Bootloader + Active Primary Partition + partition boot loader), multiple Installation media on a big enough stick might be feasible (with a more advanced bootloader like GRUB). Have to test that part.
However, the cost/media is a lot higher then a DVD. So if you need multiple Medias it will propably be cheaper to use the old DVD approach.
Due to the needs of bootsec.exe, first creating the media can be more difficulty then just burning an image. But once it is bootable this programm is no longer needed.
To PXE/network Distrubution:
If you have the nessesary setup already (DHCP/PXE Server, powerfull network), the USB stick is likely inferior. The USB stick should beat a 100 MBIT Network easily, but will propably be beaten by a 1 GBIT Network. Network isntallation uses existing infrastructure
(that you need for other reasons anyway) so the cost per media is even lower then the DVD.
The PXE way also has even better modifyability - sending out different answer files or even automatically booting different images based on the Compuers MAC adress are tried techniques.
If you lack the nessesary setup, the USB stick is a lot easier to implement and a lot easier to transport.
Advanced things:
Need to check if the partition could be formated as NTFS. I prefer a Journalling Filesystem for my USB-sticks.
Need to check if using a advanced boot manager techniques (like Grub or modifciations to the BCD of the Windows PE) allows me to put multiple install media on one Stick (with one primary partition per "media"). Especially combining the x32/x86 and
x64 Windows Installation Media would be worthwhile. As would be inlcuding a Window 8 or Vista installation media.
Current Step 3 and 2 can propably be switched. I see no reason bootsect could not run from the USB stick as it runs from the DVD (it only accesses the MBR and
VBR of the Disk, areas not in use by Windows)
Steps 1 through 3 might be possible from the Windows PE environment. If so, only a computer with legacy BIOS boot would be nessesary (no actuall installation).
Windows 7 can be installed on a (U)EFI system, but I have not checked if I can use the boot from teh stick on such a Computer. Latest for Windows 8 Media UEFI compatibilty is nessesary.
Let's talk about MVVM: http://social.msdn.microsoft.com/Forums/en-US/wpf/thread/b1a8bf14-4acd-4d77-9df8-bdb95b02dbe2 Please mark post as helpfull and answers respectively.

Advanced things:
Need to check if the partition could be formated as NTFS. I prefer a Journalling Filesystem for my USB-sticks.
Windows 7 can be installed on a (U)EFI system, but I have not checked if I can use the boot from teh stick on such a Computer. Latest for Windows 8 Media UEFI compatibilty is nessesary.
I converted the stick to NTFS using the convert.exe and it continued booting. So chances are high they only choose FAT32 in the example because no feature of NTFS was per nessesary in a "almost only reading" scenario like installation media.
The second part depends on the BIOS. I have a more advanced one where I can choose legacy boot options (like USB stick) in the boot option menu even when the default setting is UEFI, as long as I don't need Secure boot (wich I do not).
Another question arose: Windows 7 has the Kernel/BCD level ability to boot from .VHD Files. The only thing preventing version below corporate from using this feature is a license check that is run just before the login (so way after the booting has been
completed).
Starting with 3.0 Windows PE is based on the kernel of Windows 7. So the instlaltion system might have the ability to boot from .VHD too and might have no such check in place. If so, I could put both versions of the Windows 7 installer into .VHD, reducing the
need to have physical primary partitions for those.
Windows bootprocess vs. Linux boot process under BIOS:
The BIOS goes over all the boot media. If it finds one with a MBR, that one is executed and the BIOS part of the boot process is officially over.
-> Under Windows the MBR contains the "generic boot loader". A simple piece of code as old as BIOS (25 Years) that looks for the primary partition with "Active" Flag on "it's" disk. If it finds one, the Partition Boot Record of that parition is executed.
The MBR has done it's part
    -> NTLDR (NT too 2000), this one reads the boot.ini file and gives/executeds apropirate options
    -> BOOTMGR (Vista, 7), this one reads the BCD files
      -> Since Windows 7 BOOTMGR can also chainload the Partition Boot Record that is inside a .VHD File
    -> Wicher was used in Windows 3.X/95/98/ME
Higher versions can chainload lower versions, but must be designed for this and (re)installed in the proper "order".
The sometimes odd behavior that Windows 7 tries to keep 100 MiB in a seperate primary partition is there to have proper places for later additions to the BOOTMGR settings. Specifically it allows multiple BOOTMGR OS to use/edit the same BOOTMGR instace without
running into problems with "whose partition is active?" (since it is always the System Reserved one). It's not disimilar to having an extra /boot partition in Linux or how a GRUB's stage 2 works.
-> Under a typical Grub Legacy the MBR contains the Stage 1. It directly reads the Stage 2 from the proper partition/file system with a hardcoded path, but due to size limit of the MBR cannot do more. In some cases it starts a stage 1.5 wich has more
space to do work (63 sectors between MBR and first partition), but I never used this Setup
    -> Stage 2 loads the Grub Configuration from the disk. From here it depends on what OS you want to boot.
        -> For Linux or Unix the kernel is started directly.
        -> Any Windows OS up to 7 can be booted using the chainloader command. For the OS this is identical to having the partition choosen by the Generic Bootloader.
While it can be chainloaded by the Generic Bootloader from the active primary partition, GRUB and thus Linux has no
requirement for any Primary Partitions. Stage 1 is designed to directly access the specific File System containng the Stage 2. In fact it does not even need to reside on the same disk (as the Generic Bootloader has to).
If one does not need the Active Flag to control the Generic Bootloader (because a proper Stage 1 is installed in MBR) it is adviseable to mark wichever Windows Partition is chainloaded as active (up to Vista at least I had very odd behavior if the Windows boot
partition was not marked active, down to randomly shredded Partition boot managers).
After running a Windows Setup usually the Stage 1 has to be restored, as Windwos Setup will always write it's Generic Bootloader in the MBR. In order to get "rid" of a Grub all one has to do is overwrite the MBR with the Generic Bootloader and set the active
flag properly.
Let's talk about MVVM: http://social.msdn.microsoft.com/Forums/en-US/wpf/thread/b1a8bf14-4acd-4d77-9df8-bdb95b02dbe2 Please mark post as helpfull and answers respectively.

USB Stick Won't Appear on Desktop or Disk Utilities

Hi there,
One of my USB sticks doesn't seem to appear on my iMac. I have looked in disk utility and it doesn't appear there so I can't format it, and I have plugged it into another Mac and have had the same issue.
My external hard drive still appears and continues to back up using time machine, and I have tried the other USB ports in case one was faulty.
Has anyone come across this? Any tips?
Thanks a lot.

I have plugged it into another Mac and have had the same issue.
It is possible the stick has failed since you are having problems on 2 computers and not getting the correct response from what arthur suggested.

1,1 running Lion with XP Boot (re-install and what should i use for recovery disk or usb stick)?

i am trying to give my 1,1 mac pro a little love and would like to keep this machine running lion. i also have a boot camp installation of XP on it.
1. can anyone give me instructions on how/whether i can basically do a fresh install of Lion on this machine and minimize the system so it is not cluttered up with all my previous software etc, etc while still maintaining the original XP boot camp partition which i really need to have?
2. can anyone clarify for me what i should have on hand /if/ i need to boot into recovery mode or some other safe boot mode? i recently ran into an issue where i may have had to use the old Disk Utility format function and there was a reference to booting using the DVD install disks. however i am really confused as to what i should have on hand. ALSO the last time i had to do something on this machine i was told to boot into the Recovery Partition and it appears for some reason (perhaps because i had a "non-standard" windows 7 boot camp installation on the drive at the time??) that there was no recovery partition created when i upgraded to Lion.
- /anyway/ i am finding that i have the two ORIGINAL install disks for the mac pro on hand, a Max OS X Leopard and a mac OS X Snow Leopard DVD on hand but i am thinking that i should be creating some kind of USB stick similar to the one i created with yosemite? actually, i am not even sure what this USB stick for yosemite is for but i guess i can use it to boot into safe mode or something?
THANKS for any help as i'd like to get this business under control a little better in case i have an issue.
i'd also like to install Lion so that there is a Recovery Partition if possible and i think this may be possible if i don't have the windows 7 partition in the machine when i do a fresh install. any help would be great. thanks.

You have to go out of your way to build the Installer Disk yourself. But this tool makes it easy, and this site contains instructions:
http://diskmakerx.com
the bootable installer is basically to re-install the OS if i have to
Yes.
the recovery partition is somehow for fixing a problem
Recovery can go and get you the software and re-download it and start the Install, and allows the use of Disk Utility and can reset passwords.
or is there some overlap?
Yes. Both give you access to the Utilities that used to be on the Installer DVD. Disk Utility to Repair or initialize and a few other tools that can allow you to set up to install on an otherwise-bare disk or change your password.
is "Safe Mode" something completely different
Safe Mode is a way to start the fully-Installed Operating System in a special way. It first does one pass of Disk Utility (Repair Disk) against the Boot Drive. [Normally this would require booting from a different drive to make repairs.] Then it loads a minimal set of Apple-only kernel extensions, and uses a one-size-fits-all screen resolution. Then it demands your Username and password to proceed.
From there you can fix settings, use the Finder to add or delete things, and check operation with minimal extensions versus all your daily-use extensions. Very helpful for debugging extension conflicts and graphics settings problems, and fixing damaged settings. The next Restart builds a new extensions cache.

Can I install Windows 8.1 as Bootcamp partition from OSX Mountain Lion using a USB stick?

I have the following:
Bootable USB stick with Windows 8.1 - 64 bit
MacBook Pro with Mountain Lion 10.8.5 - it's probably 3-4 years old.
The Bootcamp partition currently has Windows 7 installed.
I want to know whether I can install Windows 8.1 from a USB stick into a Bootcamp partition. Apple's article on the topic refers to Bootcamp 5.1, but my OSX install has Bootcamp 5.0 - I am assuming 5.1 comes with the Mavericks version. I don't want to upgrade to Mavericks because I am running out of space as it is on the OSX partition.
Thus my question. So can I?

Your laptop has a DVD drive, right? If so you need to burn your ISO to a disc, will not work off USB

HT5639 Can I use usb internet sticks and/ or printers which don't speak apple with boot camp and win 7/ 8?

Hello all,
As a reference point for my technological skills, I work in international development and in timber framed building construction and repair. Beyond Ford full- size pick-ups pre 1993, I mostly employ 19th century systems.
This MacBook Pro is marvelous, but won't read or accept some older printers and usb internet sticks. There is also a problem with windows 8 on many of these international and older/ cheaper US devices. Will a MacBook Pro be able to communicate with them in windows 7 running on Boot Camp, or on any of the other Windows on Mac platforms? Does one work better with old stuff than another? Are any of them simpler/ more intuitive to use than others? Any informtion or suggestions, no matter how basic would be appreciated.
Thanks,
Rob

I have tried it with all 3 options. I tried the first two options with the printer plugged into port 1 on the adapter and the third option with the printer plugged into port 2. This means that I may have effectively installed all 3 options/scripts. Do I need to throw them away and start again?
Running the Choose Serial Port script writes a file that is used in processing print jobs. If you run the script a second time, it will replace the existing file with a new file.
Do I also need to configure these ports in the network settings under System Preferences?
No.
I notice too that no 'location' is given for the Stylewriter II, whereas a location is given for my other (Lexmark) printer, which is connected to the G5 iMac directly via a USB cable.
That is of no consequence. Use of the Location field is optional.
I would suggest you proceed as follows:
1. Go to the /Library/Receipts folder at the root of your hard drive. Delete the item Foomatic for StyleWriter.pkg.
2. Start the installation over from the beginning. Install the Foomatic for StyleWriter software.
3. Run the Choose Serial Port for StyleWriter script. Upon further reflection of your possible use of two Keyspan adapters, I would suggest you choose the serial port with the format USA28X...P1.1 rather than KeySerial1.
4. Run the Add StyleWriter to Printer List.
Try printing a document. If it still does not work, download a troubleshooting script from my website http://webpages.charter.net/mbroughtn/downloads/Test7Stylewriter.command.zip Run the script. Copy and paste the contents of the Terminal window in a reply. That should point to what is going wrong.
Matt

Problem that starts with *apparent* sticking caps lock key

I have a mid-2009 MacBook Pro (two weeks outside of AppleCare, of course!). Last night, it appeared the caps lock key was sticking. It would type in all caps even when I hit the button and the green indicator light went off. Moments later, I noticed that the option that shows you all the windows on the same screen was suddenly going very, very slow. I tried to restart but it started in safe mode - twice. It finally started correctly on the third or fourth reboot. I hoped it was a fluke.
Unfortunately it's happening again and rebooting doesn't seem to fix it - I can't put in my password to login because it thinks I'm typing in all caps.
Any ideas, please? Thanks.

This may enter the Apple Hall of Fame for stupid posts. I spent a couple hours last night restarting the computer, trying restore etc....and really doing anything I could from clinton's link in order to identify the problem. I'd even called our local store to let them know I would be there first thing in the morning (I'm boarding a plane in a few minutes and really needed my laptop for this trip).
So after doing all of those things + removing the caps lock key to see if it was somehow manually stuck, I go the store this morning. Virtual panic. I needed a presentation off the laptop for a workshop tomorrow and I hadn't backed up since I created it...
I enter the store, I begin to explain the situation in detail, I open up the laptop....
And the guy at the store says "Did you notice your shift key is stuck down?". Why No, I hadn't noticed that! With a tiny wiggle and a tap, that key popped back into place and the computer worked fine. The Safe Mode was happening because the shift key was down.

I am trying to download photos stored on a memory stick to my imac, but two of the files are saying unreadable. Why? Are these two sets of photos never going to be copied onto my Mac? If so, how can I get them onto my iphoto folder. Desperate. Glen

I am trying to put photos stored in a memory stick onto my Mac computer. But there are two folders that will not move. I get an error message saying - volumes/FLASH DRIVE/desktop. ini - can someone help me please? The photos are from my windows computer. Please answer back assuming I am a total drip - I am a lot older than you I should imagine !! Thanks Glenys

Can you double click on them on the memory stick, see if preview opens them, then save them to your Mac?
...JER

Please Help! I don't want images to "stick" to the outside of CS3! I want them to float!

I have CS3 and I like having my images float without "sticking" to anything over the whole screen. As it is now, they like to grab onto the edge of the application when I move them outside its boundaries. I did this all the time in CS2 and I like it a lot. This new thing is very annoying and I want desperately to TURN IT OFF. Please! I am asking could someone please tell me how to turn the image stickiness to the edge of the app OFF? Thanks so much in advance!
Nothing I've tried thus far has worked and I've lost three days trying to figure it out. Why is this not a clickable option to turn off in preferences???

You can't.
The Mail.app displays all image/photo and single page PDF attachments inline or viewed in place within the body of the message by default - sending and receiving.
You can control-click on a viewed in place attachment and select View as Icon but the icon for the attached file will remain in the body of the message. Regardless, depending on the recipient's email client and available preference settings, such attachments may appear inline or viewed in place when the message is opened by the recipient (as with the Mail.app when receiving such attachments) or as attached files only which must be opened separately to be viewed for which the sender has no control over.
This was a minor adjustment for me at first but I now prefer such attachments being displayed inline since I have confirmation that I selected the correct file or file names as attachments before the message is sent.

Warranty void stick

Hi,
I just purchased my creative zen touch a matter of hours ago. it has finished its first charge and i have gotten a few songs uploaded. However, i recently discovered that the warranty void sticker on the bottom of the device is now half covering the front and back sections. It is on the back cover only but there are symbols etched into it.
The packaging was fine. it was sealed and brand new.
Could someone shed some light on my confusion?
Thanks

Sounds like a question only Creative Support can answer, and there's no guarantee you'll get an answer from them here (as per the disclaimer at the top of the forum).

Cursor moves when in tablet mode (screen touching the pointing stick on an X220T)

Hi there,
when I put my X220T in tablet mode, the screen moves just enough to move the pointing stick in the middle of the keyboard to cause the cursor to move. I can't rest my hand on the screen without causing the cursor to move all the way accross the screen.
Am I missing a driver that would disable the nub when the screen is turned over it, or is this a design oversight? I've got the latest BIOS.
Cheers,
Kimmo
http://vanhavirta.fi/
Solved!
Go to Solution.

Nevermind, I was too hasty: https://forums.lenovo.com/t5/X-Series-Tablet-ThinkPad-Laptops/X220-TrackPoint-Wandering-in-Tablet-Mo...
http://vanhavirta.fi/

How to make text formatting stick on book cover when sent to Apple or to PDF?

In iPhoto '11 (version 9), one can format text on book covers and in text blocks by selecting the text and right clicking. Font, size, color, and shadowing can be selected and changed. All of this displays correctly and sticks when the book is saved, etc. However, if the book is "previewed" or exported to a PDF (which I believe is the format sent to Apple for actual printing) some of the formatting is lost, permanently. It just goes away. Why? And, more importantly, how can I make this formatting stick? I'm mainly interested in shadowing as it gives the text a 3d look. All shadowing is lost - font and size do stick. I have successfully done this shadowing in several previous releases of iPhoto, and actually had it printed by Apple. Any ideas out there? Or is this another wonderful "feature" ?
Thanks for playing.

Sorry LN, but that is the problem. When I do either the preview or the export to PDF, the shadow formatting disappears. There is another forum discussion where some person discovered this only after receiving their three hard cover books. I'm pretty sure it is a bug. I have Snow Leopard and iPhoto '11 (v9) both with latest updates.
One other note - when applying the text shadow, anytime I adjust either of the three shadow sliders, the shadow disappears and I must click on the main shadow button to make the adjusted shadow reappear. As I said, it does then stick until I do either the preview or PDF as described in the article you referenced. Very, very, very annoying.
Will try to contact Apple today, although I have had very poor luck with ever getting them to admit to any problem in the past. ( pride goeth before the fall....). Hope they will listen, but I have a close deadline on this book.

10.9.2 install Bootcamp win7 64bit iMac mid 2010 no bootable device - external superdrive, USB Stick

Hey all,
big problem here.
Trying to install Bootcamp on my iMac 27" mid 2010.
The thing is, during the installation, i get the "no bootable device" black screen, and i think i know why... but i need help.
System, a mid 2010 imac, 2TB HD ( Original) and an SSD Samsung 1TB at the Optical Drive SATA connection.
2TB HD is empty atm. OSX Installed on the SSD.
Bootcamp Assistant. Problem nr. 1.
He first did not want to let me create an USB drive. after hacking the assistat, deleting the "Pre" thing in the info.plist, that worked so far.
https://discussions.apple.com/thread/5479879?start=105&tstart=0 and several other postings got me so far.
Then when using the assistant, after choosing partition and so, when the iMac restarts, i get the "no bootable device" notice.
Read a lot, and it seems, that older iMacs, that originaly came with an internal superdrive only can install win 7 from that internal superdrive.
I have the problem, that i had it removed to put the SSD there.
So, when doing an EFI Boot, choosing the win USB Stick or the Win in my External Superdrive, - "no bootable...."
So i searched more. rEFIt should help. Installed, and all, doesnt work, same thing. As soon as i want to boot Win from the CD or Thumpdrive, doesnt work. :-(
In one of the many posts, someone wrote something about starting Shell in rEFIt first, etc... didnt work as well.
then i found this post:
http://www.andrewsavory.com/blog/2011/2156
sounded promissing. Somehow getting win installation files onto the Created Bootcamp partion with Virtual Mashine. But it didnt work for me.
The VW Fusion ware is different, and non of the steps he discribes works.
So how can i get it working.. it seems like it is somehow blocked to access something from the USB Ports.
Logicaly i would have to get the installation files onto a Internal drive. i Tried to create a partition and copy the Win 7 USB Thump using Disk Util Progeam onto a seperate, internal partition.. but he just does not what to do that... errormessages when trying to copy it, recreate the drive, etc.
So, i do have a 2TB internal HD, which i can use, an external superdrive, USB.Sticks. any gameplan?
And for Error-excluding: i have an original Win 7 64 bit CD, a burnd one and controled the Hash of the loaded ISO, which i downloaded for the USB-Stick.
Any help? pls!!!

Hi Sam, the Mini Optical may draw too much USB power.
Can you restore that .iso to the Flash Drive as a CD/DVD instead of an image file?

Stickies

Similar Messages

Maybe you are looking for