Still Can't Load GART drivers & AGP is MIA

This is driving me nuts...
Despite my best efforts, I (still) cannot load the GART drivers which means DX9 is saying AGP Texture Acceleration is "Not Available".
I have flashed my BIOS with the current version, removed all the drivers, downloaded and installed the latest ATI Catalyst drivers and downloaded and semi-installed the latest nVidia drivers. I say "semi-installed" because when I run the nVidia set up, the install wizard pops up, scans my system, and then shuts itself off. So I wind up manually installing only the audio drivers via "Add New Hardware"
So, does it take to get the rest of the nVidia drivers in??
You guys helped me out earlier today, can you work some magic again??

note this for k7n2 delta-L with XP also using nforce unified 5.10 with out audio keys
for to large post here, use the nvmcp.inf keys for audio
sample audio string
%PCI\VEN_10DE&DEV_01B1&SUBSYS_838410DE.DeviceDesc% = NVMPC_Install,PCI\VEN_10DE&DEV_01B1&SUBSYS_838410DE
can try fixing MS to see your hardware correctly by adding these keys in C:\windows\inf\machine.inf
[Manufacturer]
%NVIDIA_MFG%=NVIDIA_SYS
[NVIDIA_SYS]
%PCI\VEN_10de&DEV_01b4.DeviceDesc% = NO_DRV, PCI\VEN_10de&DEV_01b4
%PCI\VEN_10de&DEV_01b4.DeviceDesc% = NO_DRV, PCI\VEN_10de&DEV_0064
%PCI\VEN_10de&DEV_01b4.DeviceDesc% = NO_DRV, PCI\VEN_10de&DEV_00D4
%PCI\VEN_10DE&DEV_01AA.DeviceDesc% = NO_DRV, PCI\VEN_10DE&DEV_01AA
%PCI\VEN_10DE&DEV_01AB.DeviceDesc% = NO_DRV, PCI\VEN_10DE&DEV_01AB
%PCI\VEN_10DE&DEV_01AC.DeviceDesc% = NO_DRV, PCI\VEN_10DE&DEV_01AC
%PCI\VEN_10DE&DEV_01AD.DeviceDesc% = NO_DRV, PCI\VEN_10DE&DEV_01AD
%PCI\VEN_10DE&DEV_01EA.DeviceDesc% = NO_DRV, PCI\VEN_10DE&DEV_01EA
%PCI\VEN_10DE&DEV_01EA&REV_C1.DeviceDesc% = NO_DRV, PCI\VEN_10DE&DEV_01EA&REV_C1
%PCI\VEN_10DE&DEV_01EB.DeviceDesc% = NO_DRV, PCI\VEN_10DE&DEV_01EB
%PCI\VEN_10DE&DEV_01EB&REV_C1.DeviceDesc% = NO_DRV, PCI\VEN_10DE&DEV_01EB&REV_C1
%PCI\VEN_10DE&DEV_01EB.DeviceDesc% = NO_DRV, PCI\VEN_10DE&DEV_01EC
%PCI\VEN_10DE&DEV_01ED.DeviceDesc% = NO_DRV, PCI\VEN_10DE&DEV_01ED
%PCI\VEN_10DE&DEV_01EE.DeviceDesc% = NO_DRV, PCI\VEN_10DE&DEV_01EE
%PCI\VEN_10DE&DEV_01EF.DeviceDesc% = NO_DRV, PCI\VEN_10DE&DEV_01EF
%PCI\VEN_10DE&DEV_01B7.DeviceDesc% = NVIDIAAGP_Install,PCI\VEN_10DE&DEV_01B7
%PCI\VEN_10DE&DEV_01E8.DeviceDesc% = NVIDIAAGP_Install,PCI\VEN_10DE&DEV_01E8
%PCI\VEN_10DE&DEV_00D2.DeviceDesc% = NVIDIAAGP_Install,PCI\VEN_10DE&DEV_00D2
%PCI\VEN_10DE&DEV_01C3.DeviceDesc% = NVENETXP_Install,PCI\VEN_10DE&DEV_01C3
%PCI\VEN_10DE&DEV_0066.DeviceDesc% = NVENETXP_Install,PCI\VEN_10DE&DEV_0066
%PCI\VEN_10DE&DEV_0065.DeviceDesc% = NVHDC_Install,PCI\VEN_10DE&DEV_0065
c:\windows\inf\AGP.inf
[Manufacturer]
%NVIDIA_MFG%=NVIDIA_SYS
[NVIDIA_SYS]
%PCI\VEN_10DE&DEV_01A4.DeviceDesc%=AGP_BRIDGE_DRV,PCI\VEN_10DE&DEV_01A4
%PCI\VEN_10DE&DEV_01A5.DeviceDesc%=AGP_BRIDGE_DRV,PCI\VEN_10DE&DEV_01A5
%PCI\VEN_10DE&DEV_01A6.DeviceDesc%=AGP_BRIDGE_DRV,PCI\VEN_10DE&DEV_01A6
%PCI\VEN_10DE&DEV_01E0.DeviceDesc%=AGP_BRIDGE_DRV,PCI\VEN_10DE&DEV_01E0
%PCI\VEN_10DE&DEV_01E1.DeviceDesc%=AGP_BRIDGE_DRV,PCI\VEN_10DE&DEV_01E1
[Strings]
NVIDIA_MFG = "NVIDIA"
PCI\VEN_10DE&DEV_01A4.DeviceDesc="NVIDIA nForce AGP Host to PCI Bridge"
PCI\VEN_10DE&DEV_01A5.DeviceDesc="NVIDIA nForce AGP Host to PCI Bridge"
PCI\VEN_10DE&DEV_01A6.DeviceDesc="NVIDIA nForce AGP Host to PCI Bridge"
PCI\VEN_10DE&DEV_01E0.DeviceDesc="NVIDIA nForce AGP Host to PCI Bridge"
PCI\VEN_10DE&DEV_01E1.DeviceDesc="NVIDIA nForce AGP Host to PCI Bridge"

Similar Messages

After getting a txt message from bell today saying I went over on my data usage , I can not access my web browsing at all... There is no restrictions on my account. But I still can't load safari

After getting a txt message from bell today saying I went over on my data usage , I can not access my web browsing at all... There is no restrictions on my account. But I still can't load safari... I can still makes calls and send txt messages but I can't send iMessages

Settings > General > Reset > Reset Network Settings.

Can't load mac drivers

When I try to load mac drivers I get the following message" Bootcamp X64 is unsupported on this computer model." Windows installed properly except for this problem. I could run Microsoft Office but I need the Mac drivers to run video applications I presume.
I purchased Windows Home 64bit and was told it would work on my computer. Should have I gone for the 32bit version?
My computer is two year old IMac with following specs: 2.66 GHz Intel Core 2 Duo, 2 GB 1067 MHzDDR3, came with Leopard but I updated to Snow Leopard version 10.6.7 Can someone help me with this?
Thanks.

NA Smith wrote:
This blog looks promising for your issue: http://michael.anastasiou.me/index.php?option=com_content&view=article&id=22:qbo ot-camp-x64-is-unsupported-on-this-computer-modelq-solution&catid=7:how-to&lang = en
Awesome answer.
Rick

STILL CAN'T LOAD ANY WEBSITES IN FF, ALTHOUGH NO PROBLEMS WITH IE OR AOL. I BELIEVE I'VE TRIED EVERYTHING SUGGESTED.

Mozilla FF page loads, but no websites whatsoever will open in FF. I've checked the No Proxy box, I've turned off my Windows Firewall. There is a Firewall for my Norton, but that's been there since day 1. One day I'm doing all of my FF things with no problem; the next morning I turn the computer on & nothing in FF will work. IE works fine; AOL works fine so my internet connection is not the issue. This is the message I get no matter what website I try to open (I also copied the troubleshooting text below this): Thank you for any help - this is truly driving me nuts!
Unable to connect
Firefox can't establish a connection to the server at www.aol.com.
The site could be temporarily unavailable or too busy. Try again in a few moments.
If you are unable to load any pages, check your computer's network connection.
If your computer or network is protected by a firewall or proxy, make sure that Firefox is permitted to access the Web.
Troubleshooting "copy text to clipboard"
Application Basics
Name: Firefox
Version: 33.0.2
User Agent: Mozilla/5.0 (Windows NT 6.1; WOW64; rv:33.0) Gecko/20100101 Firefox/33.0
Multiprocess Windows: 0/1
Crash Reports for the Last 3 Days
All Crash Reports
Extensions
Name: AVG SafeGuard toolbar
Version: 17.1.3.3
Enabled: false
ID: avg@toolbar
Name: InfoAtoms
Version: 1.5.0.0
Enabled: false
ID: [email protected]
Name: Norton Toolbar
Version: 2014.7.8.23
Enabled: false
ID: {2D3F3651-74B9-4795-BDEC-6DA2F431CB62}
Name: PasswordBox
Version: 1.20.0.2308
Enabled: false
ID: [email protected]
Name: RealDownloader
Version: 1.3.3
Enabled: false
ID: {DF153AFF-6948-45d7-AC98-4FC4AF8A08E2}
Name: Skype Click to Call
Version: 6.13.0.13771
Enabled: false
ID: {82AF8DCA-6DE9-405D-BD5E-43525BDAD38A}
Graphics
Adapter Description: Intel(R) G41 Express Chipset
Adapter Drivers: igdumd64 igd10umd64 igdumdx32 igd10umd32
Adapter RAM: Unknown
Device ID: 0x2e32
Direct2D Enabled: true
DirectWrite Enabled: true (6.2.9200.16571)
Driver Date: 2-11-2011
Driver Version: 8.15.10.2302
GPU #2 Active: false
GPU Accelerated Windows: 1/1 Direct3D 11 (OMTC)
Vendor ID: 0x8086
WebGL Renderer: Google Inc. -- ANGLE (Intel(R) G41 Express Chipset Direct3D9Ex vs_3_0 ps_3_0)
windowLayerManagerRemote: true
AzureCanvasBackend: direct2d
AzureContentBackend: direct2d
AzureFallbackCanvasBackend: cairo
AzureSkiaAccelerated: 0
Important Modified Preferences
browser.cache.disk.capacity: 358400
browser.cache.disk.smart_size.first_run: false
browser.cache.disk.smart_size.use_old_max: false
browser.cache.frecency_experiment: 1
browser.places.smartBookmarksVersion: 7
browser.sessionstore.upgradeBackup.latestBuildID: 20141027150301
browser.startup.homepage_override.buildID: 20141027150301
browser.startup.homepage_override.mstone: 33.0.2
extensions.lastAppVersion: 33.0.2
gfx.direct3d.last_used_feature_level_idx: 1
network.cookie.prefsMigrated: true
places.history.expiration.transient_current_max_pages: 103947
plugin.disable_full_page_plugin_for_types: application/pdf
plugin.importedState: true
privacy.sanitize.migrateFx3Prefs: true
Important Locked Preferences
JavaScript
Incremental GC: true
Accessibility
Activated: false
Prevent Accessibility: 0
Library Versions
NSPR
Expected minimum version: 4.10.7
Version in use: 4.10.7
NSS
Expected minimum version: 3.17.1 Basic ECC
Version in use: 3.17.1 Basic ECC
NSSSMIME
Expected minimum version: 3.17.1 Basic ECC
Version in use: 3.17.1 Basic ECC
NSSSSL
Expected minimum version: 3.17.1 Basic ECC
Version in use: 3.17.1 Basic ECC
NSSUTIL
Expected minimum version: 3.17.1
Version in use: 3.17.1
Experimental Features
---------------------

An update: as mysteriously as this began last Fri., it fixed itself (apparently) today. I left my computer on when I went out early this afternoon after again trying to open all kinds of websites in FF with no luck. When I returned from my errands it was back to normal - able to open all websites again. Evidently, the firefox elves snuck into my house while I was out & fixed whatever the issue was. I'd love to know what!

Firefox says that in order to load a webpage, I have to have javascript enabled. When I follow the instructions, it shows that java IS installed, but I still can't load the page. What can I do to fix this?

When I try to load certain webpages, a message says I have to have Javascript enabled with instructions on how to enable Javascript. Javascript IS enabled, but I still get the same message. What can I do to fix this?

To avoid confusion: http://kb.mozillazine.org/JavaScript_is_not_Java
http://kb.mozillazine.org/Java <br />
http://kb.mozillazine.org/JavaScript

Can't load Synaptics drivers in Dell Vostro V13

Hello. I've spent most of the afternoon trying to make my touchpad work as intended, but without any luck. The touchpad works, but without scrolling (of any kind) and I can't disable it with syndaemon, because it complains that there's no synaptic device available.
I did install the synaptic drivers. pacman -Qs synaptic output:
local/xf86-input-synaptics 1.2.1-1 (xorg-input-drivers)
synaptics driver for notebook touchpads
I tried both methods available in the wiki (xorg and hal), but none worked for me. This is the output of some (I hope) relevant commands:
/proc/bus/input/devices/
I: Bus=0017 Vendor=0001 Product=0001 Version=0100
N: Name="Macintosh mouse button emulation"
P: Phys=
S: Sysfs=/devices/virtual/input/input0
U: Uniq=
H: Handlers=mouse0 event0
B: EV=7
B: KEY=70000 0 0 0 0 0 0 0 0
B: REL=3
I: Bus=0011 Vendor=0001 Product=0001 Version=ab83
N: Name="AT Translated Set 2 keyboard"
P: Phys=isa0060/serio0/input0
S: Sysfs=/devices/platform/i8042/serio0/input/input1
U: Uniq=
H: Handlers=kbd event1
B: EV=120013
B: KEY=500f 2902002 8380307c f910f001 feffffdf ffefffff ffffffff ffffffff
B: MSC=10
B: LED=7
I: Bus=0010 Vendor=001f Product=0001 Version=0100
N: Name="PC Speaker"
P: Phys=isa0061/input0
S: Sysfs=/devices/platform/pcspkr/input/input2
U: Uniq=
H: Handlers=kbd event2
B: EV=40001
B: SND=6
I: Bus=0019 Vendor=0000 Product=0005 Version=0000
N: Name="Lid Switch"
P: Phys=PNP0C0D/button/input0
S: Sysfs=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input3
U: Uniq=
H: Handlers=event3
B: EV=21
B: SW=1
I: Bus=0019 Vendor=0000 Product=0001 Version=0000
N: Name="Power Button"
P: Phys=PNP0C0C/button/input0
S: Sysfs=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input4
U: Uniq=
H: Handlers=kbd event4
B: EV=3
B: KEY=100000 0 0 0
I: Bus=0019 Vendor=0000 Product=0003 Version=0000
N: Name="Sleep Button"
P: Phys=PNP0C0E/button/input0
S: Sysfs=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input5
U: Uniq=
H: Handlers=kbd event5
B: EV=3
B: KEY=4000 0 0 0 0
I: Bus=0019 Vendor=0000 Product=0001 Version=0000
N: Name="Power Button"
P: Phys=LNXPWRBN/button/input0
S: Sysfs=/devices/LNXSYSTM:00/LNXPWRBN:00/input/input6
U: Uniq=
H: Handlers=kbd event6
B: EV=3
B: KEY=100000 0 0 0
I: Bus=0003 Vendor=05c8 Product=030b Version=0106
N: Name="Laptop_Integrated_Webcam_1.3M"
P: Phys=usb-0000:00:1a.7-2/button
S: Sysfs=/devices/pci0000:00/0000:00:1a.7/usb1/1-2/1-2:1.0/input/input7
U: Uniq=
H: Handlers=kbd event7
B: EV=3
B: KEY=100000 0 0 0 0 0 0
I: Bus=0003 Vendor=413c Product=8161 Version=0111
N: Name="HID 413c:8161"
P: Phys=usb-0000:00:1a.0-1.1/input0
S: Sysfs=/devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.1/3-1.1:1.0/input/input8
U: Uniq=
H: Handlers=kbd event8
B: EV=120013
B: KEY=10000 7 ff800000 7ff febeffdf f3cfffff ffffffff fffffffe
B: MSC=10
B: LED=7
I: Bus=0019 Vendor=0000 Product=0006 Version=0000
N: Name="Video Bus"
P: Phys=LNXVIDEO/video/input0
S: Sysfs=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input10
U: Uniq=
H: Handlers=kbd event9
B: EV=3
B: KEY=3f000b 0 0 0 0 0 0 0
I: Bus=0001 Vendor=10ec Product=0269 Version=0001
N: Name="HDA Digital PCBeep"
P: Phys=card0/codec#0/beep0
S: Sysfs=/devices/pci0000:00/0000:00:1b.0/input/input11
U: Uniq=
H: Handlers=kbd event10
B: EV=40001
B: SND=6
I: Bus=0011 Vendor=0002 Product=0001 Version=0000
N: Name="PS/2 Generic Mouse"
P: Phys=isa0060/serio2/input0
S: Sysfs=/devices/platform/i8042/serio2/input/input12
U: Uniq=
H: Handlers=mouse1 event11
B: EV=7
B: KEY=70000 0 0 0 0 0 0 0 0
B: REL=3
xinput list
⎡ Virtual core pointer id=2 [master pointer (3)]
⎜ ↳ Virtual core XTEST pointer id=4 [slave pointer (2)]
⎜ ↳ Macintosh mouse button emulation id=7 [slave pointer (2)]
⎜ ↳ PS/2 Generic Mouse id=8 [slave pointer (2)]
⎣ Virtual core keyboard id=3 [master keyboard (2)]
↳ Virtual core XTEST keyboard id=5 [slave keyboard (3)]
↳ AT Translated Set 2 keyboard id=6 [slave keyboard (3)]
↳ Laptop_Integrated_Webcam_1.3M id=9 [slave keyboard (3)]
↳ HID 413c:8161 id=10 [slave keyboard (3)]
↳ Sleep Button id=11 [slave keyboard (3)]
↳ Power Button id=12 [slave keyboard (3)]
↳ Video Bus id=13 [slave keyboard (3)]
↳ Power Button id=14 [slave keyboard (3)]
I can't see anywhere a synaptic device, what I'm missing? I'm sure that's something really stupid and yet I can't realize what I'm doing wrong.
Does anyone can give me a hint? Thanks for reading.

X.Org X Server 1.7.6
Release Date: 2010-03-17
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.33-ARCH i686
Current Operating System: Linux paradox 2.6.33-ARCH #1 SMP PREEMPT Thu May 13 12:06:25 CEST 2010 i686
Kernel command line: root=/dev/disk/by-uuid/dc7b3829-cad4-4785-b704-e6e6b32cab35 ro vga=792
Build Date: 01 April 2010 05:35:33PM
Current version of pixman: 0.18.2
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Tue Jun 8 17:21:52 2010
(II) Loader magic: 0x81e4c60
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 6.0
X.Org XInput driver : 7.0
X.Org Server Extension : 2.0
(--) using VT number 7
(--) PCI:*(0:0:2:0) 8086:2a42:1028:042b Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller rev 7, Mem @ 0xfe000000/4194304, 0xd0000000/268435456, I/O @ 0x00001800/8
(--) PCI: (0:0:2:1) 8086:2a43:1028:042b Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller rev 7, Mem @ 0xfe400000/1048576
(==) Using default built-in configuration (30 lines)
(==) --- Start of built-in configuration ---
Section "Device"
Identifier "Builtin Default intel Device 0"
Driver "intel"
EndSection
Section "Screen"
Identifier "Builtin Default intel Screen 0"
Device "Builtin Default intel Device 0"
EndSection
Section "Device"
Identifier "Builtin Default vesa Device 0"
Driver "vesa"
EndSection
Section "Screen"
Identifier "Builtin Default vesa Screen 0"
Device "Builtin Default vesa Device 0"
EndSection
Section "Device"
Identifier "Builtin Default fbdev Device 0"
Driver "fbdev"
EndSection
Section "Screen"
Identifier "Builtin Default fbdev Screen 0"
Device "Builtin Default fbdev Device 0"
EndSection
Section "ServerLayout"
Identifier "Builtin Default Layout"
Screen "Builtin Default intel Screen 0"
Screen "Builtin Default vesa Screen 0"
Screen "Builtin Default fbdev Screen 0"
EndSection
(==) --- End of built-in configuration ---
(==) ServerLayout "Builtin Default Layout"
(**) |-->Screen "Builtin Default intel Screen 0" (0)
(**) | |-->Monitor "<default monitor>"
(**) | |-->Device "Builtin Default intel Device 0"
(==) No monitor specified for screen "Builtin Default intel Screen 0".
Using a default monitor configuration.
(**) |-->Screen "Builtin Default vesa Screen 0" (1)
(**) | |-->Monitor "<default monitor>"
(**) | |-->Device "Builtin Default vesa Device 0"
(==) No monitor specified for screen "Builtin Default vesa Screen 0".
Using a default monitor configuration.
(**) |-->Screen "Builtin Default fbdev Screen 0" (2)
(**) | |-->Monitor "<default monitor>"
(**) | |-->Device "Builtin Default fbdev Device 0"
(==) No monitor specified for screen "Builtin Default fbdev Screen 0".
Using a default monitor configuration.
(==) Automatically adding devices
(==) Automatically enabling devices
(WW) The directory "/usr/share/fonts/Type1" does not exist.
Entry deleted from font path.
(==) FontPath set to:
/usr/share/fonts/misc,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/TTF
(==) ModulePath set to "/usr/lib/xorg/modules"
(II) Cannot locate a core pointer device.
(II) Cannot locate a core keyboard device.
(II) The server relies on HAL to provide the list of input devices.
If no devices become available, reconfigure HAL or disable AutoAddDevices.
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.7.6, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.7.6, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions/libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 1.7.6, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions/librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.7.6, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions/libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.7.6, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
compiled for 1.7.6, module version = 1.1.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "intel"
(II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
(II) Module intel: vendor="X.Org Foundation"
compiled for 1.7.4.901, module version = 2.10.0
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 6.0
(II) LoadModule: "vesa"
(II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
(II) Module vesa: vendor="X.Org Foundation"
compiled for 1.7.5, module version = 2.3.0
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 6.0
(II) LoadModule: "fbdev"
(WW) Warning, couldn't open module fbdev
(II) UnloadModule: "fbdev"
(EE) Failed to load module "fbdev" (module does not exist, 0)
(II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
4 Series, G45/G43, Q45/Q43, G41, B43, Clarkdale, Arrandale
(II) VESA: driver for VESA chipsets: vesa
(II) Primary Device is: PCI 00@00:02:0
(WW) Falling back to old probe method for vesa
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 8, (OK)
drmOpenByBusid: Searching for BusID pci:0000:00:02.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 8, (OK)
drmOpenByBusid: drmOpenMinor returns 8
drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
(II) intel(0): Creating default Display subsection in Screen section
"Builtin Default intel Screen 0" for depth/fbbpp 24/32
(==) intel(0): Depth 24, (--) framebuffer bpp 32
(==) intel(0): RGB weight 888
(==) intel(0): Default visual is TrueColor
(II) intel(0): Integrated Graphics Chipset: Intel(R) GM45
(--) intel(0): Chipset: "GM45"
(==) intel(0): video overlay key set to 0x101fe
(II) intel(0): Output VGA1 has no monitor section
(II) intel(0): Output LVDS1 has no monitor section
(II) intel(0): found backlight control interface /sys/class/backlight/acpi_video0
(II) intel(0): Output DP1 has no monitor section
(II) intel(0): Output TV1 has no monitor section
(II) intel(0): Output VGA1 disconnected
(II) intel(0): Output LVDS1 connected
(II) intel(0): Output DP1 disconnected
(II) intel(0): Output TV1 disconnected
(II) intel(0): Using exact sizes for initial modes
(II) intel(0): Output LVDS1 using initial mode 1366x768
(II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
(==) intel(0): DPI set to (96, 96)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules/libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.7.6, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) UnloadModule: "vesa"
(II) Unloading /usr/lib/xorg/modules/drivers/vesa_drv.so
(==) Depth 24 pixmap format is 32 bpp
(II) intel(0): [DRI2] Setup complete
(**) intel(0): Tiling enabled
(**) intel(0): SwapBuffers wait enabled
(==) intel(0): VideoRam: 262144 KB
(II) intel(0): Attempting memory allocation with tiled buffers.
(II) intel(0): Tiled allocation successful.
(II) UXA(0): Driver registered support for the following operations:
(II) solid
(II) copy
(II) composite (RENDER acceleration)
(II) put_image
(==) intel(0): Backing store disabled
(==) intel(0): Silken mouse enabled
(II) intel(0): Initializing HW Cursor
(II) intel(0): No memory allocations
(II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
(==) intel(0): DPMS enabled
(==) intel(0): Intel XvMC decoder enabled
(II) intel(0): Set up textured video
(II) intel(0): [XvMC] xvmc_vld driver initialized.
(II) intel(0): direct rendering: DRI2 Enabled
(--) RandR disabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) AIGLX: enabled GLX_MESA_copy_sub_buffer
(II) AIGLX: enabled GLX_SGI_make_current_read
(II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
(II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
(II) AIGLX: Loaded and initialized /usr/lib/xorg/modules/dri/i965_dri.so
(II) GLX: Initialized DRI2 GL provider for screen 0
(II) intel(0): Setting screen physical size to 361 x 203
(II) config/hal: Adding input device AT Translated Set 2 keyboard
(II) LoadModule: "evdev"
(II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
compiled for 1.7.3, module version = 2.3.2
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 7.0
(**) AT Translated Set 2 keyboard: always reports core events
(**) AT Translated Set 2 keyboard: Device: "/dev/input/event1"
(II) AT Translated Set 2 keyboard: Found keys
(II) AT Translated Set 2 keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "es"
(II) config/hal: Adding input device Macintosh mouse button emulation
(**) Macintosh mouse button emulation: always reports core events
(**) Macintosh mouse button emulation: Device: "/dev/input/event0"
(II) Macintosh mouse button emulation: Found 3 mouse buttons
(II) Macintosh mouse button emulation: Found relative axes
(II) Macintosh mouse button emulation: Found x and y relative axes
(II) Macintosh mouse button emulation: Configuring as mouse
(**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5
(**) Macintosh mouse button emulation: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE)
(**) Macintosh mouse button emulation: (accel) keeping acceleration scheme 1
(**) Macintosh mouse button emulation: (accel) acceleration profile 0
(II) Macintosh mouse button emulation: initialized for relative axes.
(II) config/hal: Adding input device PS/2 Generic Mouse
(**) PS/2 Generic Mouse: always reports core events
(**) PS/2 Generic Mouse: Device: "/dev/input/event11"
(II) PS/2 Generic Mouse: Found 3 mouse buttons
(II) PS/2 Generic Mouse: Found relative axes
(II) PS/2 Generic Mouse: Found x and y relative axes
(II) PS/2 Generic Mouse: Configuring as mouse
(**) PS/2 Generic Mouse: YAxisMapping: buttons 4 and 5
(**) PS/2 Generic Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "PS/2 Generic Mouse" (type: MOUSE)
(**) PS/2 Generic Mouse: (accel) keeping acceleration scheme 1
(**) PS/2 Generic Mouse: (accel) acceleration profile 0
(II) PS/2 Generic Mouse: initialized for relative axes.
(II) config/hal: Adding input device Laptop_Integrated_Webcam_1.3M
(**) Laptop_Integrated_Webcam_1.3M: always reports core events
(**) Laptop_Integrated_Webcam_1.3M: Device: "/dev/input/event7"
(II) Laptop_Integrated_Webcam_1.3M: Found keys
(II) Laptop_Integrated_Webcam_1.3M: Configuring as keyboard
(II) XINPUT: Adding extended input device "Laptop_Integrated_Webcam_1.3M" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "es"
(II) config/hal: Adding input device HID 413c:8161
(**) HID 413c:8161: always reports core events
(**) HID 413c:8161: Device: "/dev/input/event8"
(II) HID 413c:8161: Found keys
(II) HID 413c:8161: Configuring as keyboard
(II) XINPUT: Adding extended input device "HID 413c:8161" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "es"
(II) config/hal: Adding input device Sleep Button
(**) Sleep Button: always reports core events
(**) Sleep Button: Device: "/dev/input/event5"
(II) Sleep Button: Found keys
(II) Sleep Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "es"
(II) config/hal: Adding input device Power Button
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event4"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "es"
(II) config/hal: Adding input device Video Bus
(**) Video Bus: always reports core events
(**) Video Bus: Device: "/dev/input/event9"
(II) Video Bus: Found keys
(II) Video Bus: Configuring as keyboard
(II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "es"
(II) config/hal: Adding input device Power Button
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event6"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "es"
(II) AIGLX: Suspending AIGLX clients for VT switch
(II) AIGLX: Resuming AIGLX clients after VT switch
(II) intel(0): No memory allocations
(II) intel(0): EDID vendor "CPT", prod id 6100
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1366x768"x0.0 75.44 1366 1425 1464 1560 768 773 782 806 +hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "1366x768"x0.0 50.29 1366 1425 1464 1560 768 773 782 806 +hsync -vsync (32.2 kHz)
(II) AT Translated Set 2 keyboard: Device reopened after 1 attempts.
(II) Macintosh mouse button emulation: Device reopened after 1 attempts.
(II) PS/2 Generic Mouse: Device reopened after 1 attempts.
(II) Laptop_Integrated_Webcam_1.3M: Device reopened after 1 attempts.
(II) HID 413c:8161: Device reopened after 1 attempts.
(II) Sleep Button: Device reopened after 1 attempts.
(II) Power Button: Device reopened after 1 attempts.
(II) Video Bus: Device reopened after 1 attempts.
(II) Power Button: Device reopened after 1 attempts.
Thanks for your interest!

Can't load Epson Drivers

I am not able to load any Epson print drivers from the Epson website onto my iBook. I reloaded the software using the combi choice, reparired permissions, and restarted numerous times. Still no go.
I have no problems loading the same drivers on a G4 Power Mac with the same version of software. Does anyone have any idea what's going on?
Thanks,
Lou

I now have Epson drivers. I was doing something really stupid. I did not have the printer connected to the computer when I tried to add the print drivers. Duh.
Lou

Still can't load Apple OS X

My problem is after first screen where you choose your language a yellow warning triangle comes up and says you cannot load apple on this computer. At this stage there is the usual row of options on the top of the screen. You cannot access these until you quit the warning message.
I am at my wits end with this.Any help would be very gratefully appreciated.
P.S. I did not install windows it was already installed when I bought the Macbook.

There are at least 3 variables to your problem. The hard drive, the ram, and the optical drive. You need to change one of them to see where the problem points to. I don't think the order of the change will make much difference. Problems are always found at the last place you look
To get rid of the variables on your existing drive you could try to install Leopard to an external hard drive that is properly partitioned with the right Partition Scheme for your CPU and formatted as HFS+ Journaled. If that works you can SuperDuper! clone the new OS onto the old boot partition on your original drive. This would leave the existing Windows partition alone.
If you can't install to an external drive, then I suspect any 3rd party ram is getting in the way or the optical drive is having problems reading the DVD.
If it's 3rd party ram, it can usually be removed during installation and replaced later (your profile doesn't say how much you have). The installer seems to be more sensitive than the actual OS.
If it's the optical drive you can try to use the drive in your iMac by booting it in target mode and connecting it to your Laptop.

Can't load HP612c Drivers

I just reinstalled Window 7 & upgraded to SP1.
I have a old Paralell port HP Deskjet 612C connected to a Print Server [ Linux ]
I am unable to Install the Drivers.
The Print Server does not push the drivers to my workstation
I have to manually select the driver
The DeskJet 612C [or even 610c] is not listed in the HP offerings.
It used to be there
The website does not allow to download
The printer is not USB capable [it's that old]
The NT drivers that came with the Printer won't work.
Any Ideas???

Hi, Dave.
It may be too late, but I found Realtek drivers here that work for my 845E Max-L under Windows 98.
HTH.
regards, Andy

Can't load any webpages but internet works

I ran into an odd issue on a work computer running OS X Mavericks 10.9.2.
Every morning when I come in, the computer is unable to load any webpages using Chrome or Safari. Other things that rely on an internet connection (but are not accessed through the browser) still work (i.e. LogMeIn Hamachi, Accessing a remote file server, etc).
I don't think it's a DNS issue. I am able to successfully ping any website. AFP requests that rely on DNS lookup also go through. But I am unable to access any website, located on the internal network or the internet even if I know the IP address.
I tried manually setting the DHCP settings and rotating the DNS servers. Still can't load webpages.
I also tried restarting mDNSresponder and it still didn't work. The only thing that works is restarting the computer.
This happens every once in a while on other computers in the office, too.
I'm stumped. Any ideas?
Thanks in advance.

Log out under the Apple in the Menu bar.
Log into Guest
Open Safari and see if you see the same behavior
If no, it's an issue in your User's folder.
If yes, it's an base issue.
Even though you are fully updated, running the combo updater can help.
MORE INFO ON WHY RUNNING COMBO FIXES ISSUES
Apple updates available from the Software Update application are incremental updates. Delta updates are also incremental updates and are available from Apple Downloads (software updates are generally smaller than delta updates). The Combo updates contain all incremental updates and will update files that could have become corrupted.
Combo updaters will install on the same version as they're applying--no need to roll back or do a clean install.
"Delta" updaters can only take you from one version to the next. For example: 10.9.3 to 10.9.4. If somehow the 10.9.3 is missing something it should have, and that something isn't changed between 10.9.3 and 10.9.4 it will still be stale after the delta update.

Can't load drivers for KT4A-V with Sempron 2800

I have a kt4a-v board with Sempron 2800 chip
256mb geforce FX5500-TD256 TV DVI AGP card
also 512 Mb PC2700 DDR
Loading windows 98SE works fine until I try to load the drivers that come with the motherboard.
Windows will then not load in anything other than safe mode.

Hello,
Memory module, 1 of them could be faulty but I know windows 98se does not like a lot of memory.
This website says it is made worse with large memory video cards.
http://www.dewassoc.com/support/win98/win9x_512memory.htm
Try this then out the other stick in.
http://support.microsoft.com/?kbid=304943
If you swap the sticks around what happens?
Here is a program that can test the memory.
http://www.memtest.org/download/1.51/memtest86+-1.51.floppy.zip
Download, extract it to a folder, run the install.bat and it will make a memtest bootdisk.

Updating ojdbc drivers Can't load IA 32-bit .so on a IA 32-bit platform

I ran into some problems updating the Oracle OCI client and drivers; I downloaded the basic instant client package version 11.1.0.7.0 from the oracle website, then updated my maven pom file to fetch the ojdbc5 jar file (11.1). Then when I packaged and deployed it on my tomcat server I ran into this error when requesting from the server:
Caused by: java.lang.UnsatisfiedLinkError: /home/tongz/apache-tomcat-5.5.27/webapps/ROOT/WEB-INF/lib/libocijdbc11.so: Can't load IA 32-bit .so on a IA 32-bit platform
This error seems to stem from version compatibility issues / permissions; however even after I changed permissions to r/w on all oracle related lib files and checked that my java version is compatible (1.5.0_11), I still get the same error and don't know what could be the cause. Please advise. Thanks.
Edited by: user9272841 on Mar 10, 2010 11:49 AM
Edited by: user9272841 on Mar 10, 2010 11:58 AM

Thanks for the quick reply Chris.
You're right. When I run file libttclient.so on the different client files, I see the version 5 one is 64-bit but the version 6 one is 32-bit.
Version 5 fie: libttclient.so: ELF 64-bit LSB shared object, AMD x86-64, version 1 (SYSV), not stripped
Version 6 file: libttclient.so: ELF 32-bit LSB shared object, Intel 80386, version 1 (SYSV), not stripped
The SysAdmin says they don't have 64-bit versions. Oh dear! And the developers aren't keen on changing their code to use a 32-bit JVM.
Ah well, thanks for the response.
Best wishes!

My iphoto9 has not been able to open for over 10 days!! I can't load my Christmas pics, etc. I know the pics are still there because I can access them through a round about way. Can anyone help me to OPEN iPHOTO!?

My iphoto9 has not been able to open for over 10 days!! I can't load my Christmas pics, etc. I know the pics are still there because I can access them through a round about way. Can anyone help me to OPEN iPHOTO!?

To re-install iPhoto
1. Put the iPhoto.app in the trash (Drag it from your Applications Folder to the trash)
2a: On 10.5: Go to HD/Library/Receipts and remove any pkg file there with iPhoto in the name.
2b: On 10.6: Those receipts may be found as follows: In the Finder use the Go menu and select Go To Folder. In the resulting window type
/var/db/receipts/
2c: on 10.7 they're at
/private/var/db/receipts
A Finder Window will open at that location and you can remove the iPhoto pkg files.
3. Re-install.
If you purchased an iLife Disk, then iPhoto is on it.
If iPhoto was installed on your Mac when you go it then it’s on the System Restore disks that came with your Mac. Insert the first one and opt to ‘Install Bundled Applications Only.
If you purchased it on the App Store or have a Recent Mac you can find it in your Purchases List.

Can't load drivers for Canon MP610 onto new iMac since loading Leopard

Hello, all you amazingly helpful folks.
Bought new iMac + Canon MP610 yesterday. Successfully installed printer on 3 Macs and a PC, and all was well.
Then--discovered that Leopard DVD was hiding in the box. So, installed Leopard uneventfully. Then--found that scanner wouldn't respond to any commands, and subsequently, I could no longer print from the new iMac ONLY (other Macs still printing fine).
So--I deleted all Canon printer-related folders on the new iMac, and tried to re-load the drivers from the Canon CD. MP Drivers won't load. Keep getting FAILURE message. Tried re-booting, unplugging, in all combinations. Printer still works from the other Macs. Maybe loading Leopard after the original MP610 installation confused things??
What to do next?
Also--NO DRIVERS available for MP610 on Canon web page.
Any assistance much appreciated!!!
Thank you.

You may have already done this so forgive me if you have, but I would try deleting the contents of the /Library/Printers/Canon/BJPrinters folder. I would then navigate to the /Library/Receipts and delete the Canon MP610 xxx.pkg file.
Then control-click on the Printers list in Print & fax and click on "Reset printing system..."
Then empty the Trash, unplug the MP610 USB and restart the iMac.
Then I would install the MP610 v6.91 OS X driver. I found it via the Canon Australia web site (http://www.canon.com.au/products/allin_one_printers/all_in_one_printers/mp610support.aspx).
Once the installation is complete, reconnect the MP610 to the iMac and wait. The printer should automatically appear in the Print & Fax application.
Also, in future, you should be posting this on the Leopard printing forum...

I did erase my iphone Erase all content and setting since 4 hours and still it is loading ?????? what can i do ?????????????????

I did Erase my iphone Erase all content and setting since 4 hours and still it is loading ??????
what can i do ???????????????
i am using iphone 4

Hi soulhaib elroumi,
If you haven't already done so, does restarting or resetting the iPhone help the issue?
iPhone, iPad, iPod touch: Turning off and on (restarting) and resetting
http://support.apple.com/kb/HT1430
If not, you may want to restore your iPhone in recovery mode using a computer with iTunes.
iOS: Unable to update or restore
http://support.apple.com/kb/HT1808
Thanks,
Matt M.

Still Can't Load GART drivers & AGP is MIA

Similar Messages

Maybe you are looking for