Still connecting... in iPhoto 5.0.4 to order book

I have the not uncommon problem of trying to order a book...the book pages load; I get the "connecting" blue and white barber shop bar...and it never happens. I tried asking support, and they told me to try a hard line instead of wireless--nothing. Then I went to these boards, and took the advice to throw out the preferences...I'm still trying to rebuild my library from that little stunt. SO now I have two questions:
-1-
Can people really order books still from iphoto 5.0.4, and if so how? My 1-click is active, etc.
-2-
Did I lose my book as I'd spent days laying it out forever by taking advice from this board? If not, how do I get it back? I am currently reloading everything through "add to library..." and taking everything in the pictures folder into i photo...no books or albums have yet appeared.

Bookish
Welcome to the Apple user discussion forums
Can people really order books still from iphoto 5.0.4, and if so how? My 1-click is active, etc.
Yes - lots of people do it all the time with no problems
Then I went to these boards, and took the advice to throw out the preferences...I'm still trying to rebuild my library from that little stunt
Specifically what advice did you follow and what did you do? I'v not seen any advice here that would cause library corruption causing you to have to rebuild your library. Certainly deleting the iPhoto preferences will not corrupt your library - it will not have any affect of any sort on your library. Any corruption problems you have would have been caused by something else.
Did I lose my book as I'd spent days laying it out forever by taking advice from this board?
Again nothing I've seen here will cause you to lose anything - except your preference settings which are easily reset.
If not, how do I get it back?
Again - that depends on what you did and what you are seeing.
I am currently reloading everything through "add to library..." and taking everything in the pictures folder into i photo...no books or albums have yet appeared
Again - "add to library" is not a part of any of the instructions I have seen here - depending on what you did and what you have there may be ways to save your library with its projects (books, etc) - but add to library will not include your projects
what did you do?
what are you seeing?
How did you rebuild your library?
Why are you adding to library now?
LN

Similar Messages

  • I tried to download video from RCA Small Wonder EZ201 to my new macbook pro.  Macbook pro recognizes the device but then message appears that device was improperly ejected when it is still connected. How can I download these videos?

    When I connect the RCA Small Wonder to my MacBook Pro, the device is recognized in finder as EZ201.  I tried to copy the video files in the folder but within a minute or two, I receive a message that the disk was ejected improperly, even though the device is still connected.  I was able to download the first few videos before it stopped working and was able to play them using Perian.  However, when I tried to connect the device again, it froze my system and I had to force a shut down by turning the computer off. Why is the device initially recongized but then shows as improperly ejected when it is still connected? How can I download the videos if the MacBook Pro won't allow the device to stay connected?

    A picture of a screen that suggests my new MBP Retina never connects to the "Macbook Pro backup ("StefanTimeCapsule")
    This is the one that has the files for the backups procured by the Time Machine program. But it can't "connect"-- You 'll see int he sideways pic (sorry!) that the options STILL says "connecting"
    Do i have to make these Time Machines more open to connection?

  • Firefox has suddenly stopped connecting on one of three user accounts on the same computer. That account still connects with Safari - but not Firefox. A clean-install has not solved the problem. Help?

    Three user accounts on the same computer all link to a single copy of Firefox 3.6.8 - but one of them has suddenly lost its ability to use the program. Firefox opens in that account, but it cannot connect to the Internet. 'Done' appears at the lower left of a blank Firefox page [it's set to load a blank page initially], as though a page had finished downloading ... but Firefox does not actually generate any Internet activityx.
    Previously, the Firefox connection for this account was smooth and reliable. I haven't added, upgraded or downloaded any new programs, nor made any other computer changes in recent weeks or months.
    Puzzlingly - that same account still connects successfully to the Internet via Safari. And the other accounts on the same computer continue to use Firefox with no problem - including a test user-account that I set up today to help troubleshoot the problem. The blockage is restricted solely to Firefox with that one user account.
    Following your Support page instructions, I did a clean-install of Firefox 3.6.8, removing both the existing Firefox 3.6.8 and the Library/Application Support/Firefox folder. Going the extra mile, I checked all accounts to be certain that no Firefox folders remained in any of them - then emptied the Trash and restarted before installing a freshly downloaded 3.6.8. But blimey - the blockage still persists for that one user account.
    Firefox shows no visible cookies that might influence the connection. [It's set to delete all cookies upon closing anyway.] And I see no obvious instructions in Mac's firewall or any software program to refuse access to Firefox. The computer is stand-alone, not networked. And in any case, Firefox works just fine in the two other user accounts.
    Deleting the hobbled user account is not feasible. So what is causing this roadblock? Did I miss a step in the clean-install? How can that account resume using Firefox?
    Thanks in advance for your advice.

    If files already have been downloaded then remove the files in the updates and updates\0 folder.
    You can also delete active-update.xml and possibly updates.xml (stores the update history).
    * http://kb.mozillazine.org/Software_Update (Software Update not working properly)
    C:\Users\<user>\AppData\Local\Mozilla\Firefox\Mozilla Firefox\updates
    (%LOCALAPPDATA%\Mozilla\Firefox\Mozilla Firefox)

  • HT5706 trouble staying connected to air play with Apple TV even though my device is still connected to the internet and playing.

    I am having trouble staying connected to air play with Apple TV even though my device is still connected to the internet and playing.

    Troubleshoot the network connectivity issues.
    Power cycling the ATV and router is generally a good place to start.

  • Can someone please tell me a simple but effective method for burning a slideshow to DVD? Now that the connection between iPhoto and iDVD no longer exists, I can't figure out a way to get there with an acceptable quality result.

    Can someone please tell me a simple but effective method for burning a slideshow to DVD? Now that the connection between iPhoto and iDVD no longer exists, I can't figure out a way to get there with an acceptable quality result.

    Export the slideshow out of iPhoto as a QT movie file via the Export button in the lower toolbar.  Select Size = Medium or Large.
    Open iDVD, select a theme and drag the exported QT movie file into the open iDVD window being careful to avoid any drop zones.
    Follow this workflow to help assure the best qualty video DVD:
    Once you have the project as you want it save it as a disk image via the File ➙ Save as Disk Image  menu option. This will separate the encoding process from the burn process. 
    To check the encoding mount the disk image, launch DVD Player and play it.  If it plays OK with DVD Player the encoding is good.
    Then burn to disk with Disk Utility or Toast at the slowest speed available (2x-4x) to assure the best burn quality.  Always use top quality media:  Verbatim, Maxell or Taiyo Yuden DVD-R are the most recommended in these forums.
    If iDVD was not preinstalled on your Mac you'll have to obtain it by purchasing a copy of the iLife 09 disk from a 3rd party retailier like Amazon.com: ilife 09: Software or eBay.com.  Why, because iDVD (and iWeb) was discontinued by Apple over a year ago. 
    Why iLife 09 instead of 11?
    If you have to purchase an iLife disc in order to obtain the iDVD application remember that the iLife 11 disc only provides  themes from iDVD 5-7.  The Software Update no longer installs the earlier themes when starting from the iLIfe 11 disk nor do any of the iDVD 7 updaters available from the Apple Downloads website contain them. 
    Currently the only sure fire way to get all themes is to start with the iLife 09 disc:
    This shows the iDVD contents in the iLife 09 disc via Pacifist:
    You then can upgrade from iDVD 7.0.3 to iDVD 7.1.2 via the updaters at the Apple Downloads webpage.
    OT

  • A few days ago i small piece of plastic got stuck and subsequently fell out the charger hole of my ipod classic, although it still connects to itunes and syncs itunes says it has synced but there is nothing on my ipod! Nothing seems to work! HELP! :/

    A few days ago i small piece of plastic got stuck and subsequently fell out the charger hole of my ipod classic, although it still connects to itunes and syncs itunes says it has synced but there is nothing on my ipod! I have done this a few times and nothing seems to work! HELP! :/

    Transfer all of your content to the computer:
    Tunes Store: Transferring purchases from your iPhone, iPad, or iPod to a computer
    http://support.apple.com/kb/HT1848
    Then try turning the device off and on again. I'd leave it off for 10-15 minutes, but that is up to you:
    http://support.apple.com/kb/HT1430
    If the item is still there, you may need to restore the device:
    http://support.apple.com/kb/HT1414
    Hope that helps . Worst case scenario, you may need to write into iTunes support to see if they can also help!!

  • My camera Canon G3 (i know it's old) no longer connects to iPhoto (8.1.2) on my iMac, I have checked with my friends iMac same model iPhoto version and it works fine using my cable, I would appreciate any help getting this sorted

    My camera Canon G3 (i know it's old) no longer connects to iPhoto (8.1.2) on my iMac, I have checked with my friends iMac same model iPhoto version and it works fine using my cable, I would appreciate any help getting this sorted

    As a Test:
    Hold down the option (or alt) key and launch iPhoto. From the resulting menu select 'Create Library'
    Import a few pics into this new, blank library. Is the Problem repeated there?

  • Alright, so my ipod touch stopped working, but I can still connect it to itunes, but my friend gave me his old nano. I was wondering how I could get my more updated songs from my ipod touch onto the shuffle. My laptop crashed whish had all my new music

    Alright, so my ipod touch stopped working, but I can still connect it to itunes, but my friend gave me his old nano. I was wondering how I could get my more updated songs from my ipod touch onto th nano. My laptop crashed whitch had all my new music, and im afraid if I sync my Ipod touch to the desktop with all my old songs, ill lose all my newer ones which I dont want to happen because I want them on my nano. Im sorry for the confusing topic im just so lost.

    All you have to do is connect your new iPod to the computer that has the library for your old iPod.
    When iTunes comes up, click on your new iPod under Devices.
    At the top of the Summary Page click Music.
    Click Synch Music.
    Do the same thing for Photos, Apps, Movies and so on...
    Now just synch the iPod.

  • I created a book on iPhoto. I click on the buy button, and I get a connecting message with a blue striped rectangle. I am connected to the internet and I have made books before without any problems. I have tried for the past two weeks at various times.

    I created a book on iPhoto. I click on the buy button, and I get a  message that says Connecting with a moving blue striped rectangle. I am connected to the internet and I have made books before without any problems. I have tried for the past two weeks at various times and I get this same message each time. Any ideas about what is going on? 

    First confirm that you can create a PDF file of your book as described in this Apple document: iPhoto '11: Preview a book, card, or calendar before you order or print it. Post back with the results.
    OT

  • I lost my phone and i got an unlocked 4s from my gf she used it before an its still connected to her icloud is there a way i can restore my icloud back up to replace hers without messing up the unlock also my latest backup isnt showing on my pc help plz!!

    i lost my phone and i got an unlocked 4s from my gf she used it before an its still connected to her icloud is there a way i can restore my icloud back up to replace hers without messing up the unlock also my latest backup isnt showing on my pc help plz!!

    Please please help me, if you know how.

  • IPhone 3G still connecting to 2.4 GHz N network. How is that possible?

    I have an Extreme N that is set to 2.4 GHz N and extended with an Express N. Question is, how is it possible that my iphone 3G and touch are still connecting to WiFi? Should they not even see my N network since the are both G?

    Kind of odd... Mine did the same thing with my extreme. I have it set to 2.4 N only and yet my iphone picked it up and connected with no problems. Are we certain that they didn't stuff an N card in there? I know what the specs say but it clearly saw and connected to the router. I'm a network engineer and know what mine is set to. In fact, I checked it.

  • My App Store is connected to another account. I've tried to alter all my settings through iTunes, The App Store on both the phone and my Mac but it is still connected to the original owner's apple ID. Is there something I can do?

    My App Store is connected to another account. I've tried to alter all my settings through iTunes, The App Store on both the phone and my Mac but it is still connected to the original owner's apple ID. Is there something I can do?

    Turn off Find My iPhone in iCloud on the iDevice.
    Log out of iMessage, Facetime, remove Apple ID from iTunes & App Store.
    Use Settings > Reset > Erase All Content and Settings.
    Then set it up as a new iPhone with your own Apple ID.

  • I need advice:  I love my apple TV.  But my laptop at home, only has a 750gig hard drive.  Is there a possibility of having all my media on an external hardrive to still connect to the Apple TV?

    I need advice:  I love my apple TV.  But my laptop at home, only has a 750gig hard drive.  Is there a possibility of having all my media on an external hardrive to still connect to the Apple TV?
    Is there like in a hard drive of which iTunes can read the media, which will not require me to add and delete media onto iTunes, because of a lack of space on my laptop?

    just get an ext HD, and point your itunes library to that drive so now you'll just keep all your media on this ext

  • After 2.0 update, WiFi still connects, but won't load pages or any internet

    So I had just used the IPod touch to hit some web pages, look at weather, stocks, youtube etc... an hour later....
    installed the 2.0 update with the New York Times app, now I still connect to my access point, renewing IPs still work, It IS connected to the AP, but Internet based apps time out.
    Example error: Safari could not open the page because the server stopped responding.
    I have rebooted, restarted, restored, and all the other things I've seen mentioned, but still can't get internet traffic. At one point I even tried connecting to the AP management, was prompted for ID and password, but then blank page.
    any help appreciated

    Exactly the same here. Just noticed this in my local coffee shop (Neros) where I used to be able to log on to BT Openzone. Now, since updating to 2.0 version, I get the same error message as you i.e. I can find and attach to the WiFi host but cannot get any further than "Safari can't open the page because it is not connected to the internet" Tried re-booting to no avail. My WiFi works just fine at home, though. Really annoying. Any ideas ?

  • When going to a website from the desktop I get the followi ng message. "There was a problem sending the command to the program" Even though I get this messge, it still connects with the website/

    When going from the desktop to a website, I get the following message. "There was a problem sending the command to the program" Even though I get this message, I still connect to the website.

    As reported in earlier replies, the annoyance disappeared after I upgraded to Roboform 7.5.6, from 7.5.4.
    Regards, Steve

Maybe you are looking for

  • BPM and OSB

    If customer has Oracle BPM 11g license, does that also mean he automatically has Oracle soa 11g license as well ? Or is oracle soa sepearte license one needs to buy apart from BPM ? also, have webcenter 11g. so do automatically get to use OWSM ? or i

  • Forcing a skin updateDisplayList ?

    Having got over my previous HSlider trackSkin issue, I have a new problem. I want to redraw my track skin in response to the sliders value change. If I derive my own class from HSlider I can see the slider's updateDisplayList function gets called whe

  • Mechanical Engineering CAD Softwares in Macbook Pro

    I would like to buy a MacBook pro for my personal & official use. First of all I want to introduce myself, I'm Karthik mohankumar working as design engineer in hydraulics. Will MacBook pro run CAD software's such as Creo 2.0, Solidworks, Auto CAD, Ca

  • Personal hotspot disappeared in iphone4s!?

    Hi, I have an Iphone 4s and the new Ipad mini. I could always set a personal hotspot on my iphone to connect with my ipad, but after the updates to IOS8 this option has disappeared. Apparently, this personal hotspot option is not available any more f

  • Authentication dialog disappears

    Some time after upgrading to 10.4.6 (on my G4 mirrored doors), and on a couple of G4 QuickSilvers with 10.4.5 I get very strange behavior: every time a new software update or new application is installed and the system asks for administrator password