Still image size limit?

Is there a pixel count limit for still images one wishes to use in iMovie '09? I want to do a long Ken Burns from top to bottom over a piece of art around 10,000 pixels tall.

I couldn't get the tall image (10800 pixels tall--a credit roll) to even enter the timeline. So I shrank it to 7200 pixels tall and it did enter the timeline and I could do a looooong KB move. It animated okay, but the image of the letters was fuzzy junk. There must be some unpublished internal limit and it would be nice to know what that is for more normal KB moves...

Similar Messages

  • Image size limit in Lr 5.3-64 and Ps CC-64

    What is image size limit in Lightroom 5.3 - 64 bit And Ps CC - 64 bit?

    I believe the maximum image size in Lightroom is 64kpixels X 64kpixels.
    I don't know what it is for Photoshop, but I'll bet that Google thing can find out.

  • Image size limit

    Hi all,
    is there an image size limit in JSP ?
    or any setting I have to change in TOMCAT 3.2 ?
    I have a problem to load a image at size 550 x 60. When i change it into smaller size, there is no problem.
    This is the error message from the TOMCAT :
    "2001-11-29 11:47:06 - Ctx( ): IOException in: R( + /images/abc.gif + null) Sof
    tware caused connection abort: socket write error "
    Please help me
    Richard

    Hi
    I tried reproducing the error but I was able to load much larger images also. Could you check to see if the file name is correct including the extension. Sometimes even the file extension can be case sensitive.
    What OS are you using. I tested Tomcat 3.2.3 on both Solaris 8 and Windows 2000.
    Let me know
    Good Luck!
    Eshwar Rao
    Developer Technical Support
    Sun microsystems
    http://www.sun.com/developers/support

  • This is about the still image size changing from what I see on the computer monitor and what the burned DVD shows on the TV

    I have Prem.El 12 and have used PE4 for years.  I have a new PC that runs Win7Pro.  The still images on the computer monitor are within the "safe margins".  The still images after the movie has been burned to a disk are MUCH smaller on the TV screen.  Is this an issue of 16:9 vs 4:3 ratios?  My TV is 4:3.  Can I tell PE12 to make the movie a 4:3?

    retchemteach
    Although I have seen your post of today in my Inbox Email Notifications, that post has not yet appears in this thread. It will probably will sooner or later. But, to keep things moving along....this is a copy of what I am seeing as your message of today in my Indox Email Notifications
    Thank you for your patience in the time it is taking me to get back to you.
    I am still trying to buy some DVD-RW discs and will hopefully do that in a
    bit.  Meanwhile, I have more info for you and some simple (I hope)
    questions.  If you want to insert your answers, that would be fine.
    My camera (for stills and video) is set to the 4:3 ratio.  It is capable of
    being set to a 16:9 ratio if I wanted to do that.  I looked in its TOOLS
    menu and saw this info.
    My TV is definitely a 4:3 TV.  (I measured it with my tape measure and
    divided W/L to get 1.33)  The TV can show a 16:9 movie and just adds the
    black bars on the top and bottom.  Question: What will my old 4:3 movies
    look like on a 16:9 TV whenever we buy one of those?
    It seems to me that I want to set PE12 to the NTSC DV Standard you
    mentioned.
    I do NOT know how to “size your photos so that each has a 4:3 aspect”,
    unless you mean doing that in Photoshop Elements, which I know how to do
    (*see below)
    I had NOT considered that I would need to watch the preset for the
    ‘Publish+Share’ step; so that’s good to know (I copied and pasted your info
    for later use).
    BTW, years ago when I had difficulties with my XP computer working on PE4
    (had only 2 GB RAM), an Adobe tech told me to resize my photos * to have a
    720 pixel width (the height would be automatically adjusted) to lower the
    file size to something my computer could handle without crashing.  (That
    was back in the good ol’ days when Adobe support would actually talk with
    their customers and try to help them in the first month)
    My new computer has 16GB RAM.  Do you think I still need to reduce file
    size?  One does lose some sharpness in the resizing process…..however,
    these videos I’m making are travelogues and are for a fun way to view pics
    and videos of a trip…nothing Earth shattering….and just a hobby to keep me
    off the streets.
    I truly appreciate the time you take to help me (and others).  I was even
    tempted to try to install my old PE4 on my new computer just to be able to
    enjoy my hobby again.
    My reply to the above....
    1. If you camera is giving you 4:3 photos and your Premiere Elements 12/12.1 is running on Windows 7, 8, or 8.1 64 bit, then leave
    the photos as is unless you have a lot of photos and each has pixel dimensions sizes way over 1920 x 1080 pixels that are giving your computer resource issues. If you have to down size them because of computer resources, then copy the photos to a computer desktop folder and also create an empty folder on the computer desktop.
    a. Photoshop Elements Editor, File Menu/Process Multiple Files.
    Process Files form Folder
    Source - browse to and select the computer desktop folder with photos to be resized
    Destination - browse to and select the empty computer desktop folder
    Image Size
                 Check Mark Next To Resize Images
                (no check mark next to Constrain Proportions)
                Type in Width = 1000  (set units for pixels)
                Type in Height = 750 (set unites for pixels)
    File Size
               Check Mark Next to Convert Files To
               Set for JPEG High Quality
    The above should work fine for a NTSC DV Standard project with a burn to DVD disc with preset NTSC_Dolby DVD (4:3 video).
    2. With regard to the TV Set and 16:9 video....when you have the DVD-player attached to the TV, do you have the opportunity to bring up a display of menus with
    controls for Picture and Aspect Ratio? From what you have written so far, it looks like the answer is no. I am not sure how your TV DVD
    player will handle 16:9.
    Best do a mini test run
    1. Project preset set manually to NTSC DV Widescreen (please refer to post 1 link)
    A few photos sized for 1600 x 1200
    In the Premiere Elements project, use the Safety Margins inner rectangle for text placement
    Publish+Share/Disc/DVD disc with preset = NTSC_Widescreen_Dolby DVD.
    See what that looks like on your TV DVD player.
    If you discovered that your current TV DVD player can be set for a 16:9 display, then I have a preferred workflow for
    NTSC DV Widescreen which typically gives best possible results. Hints of things to come.
    Please review and consider. Thanks for the follow ups.
    ATR

  • Still image sizes in Premiere Pro CS5.5

    I've been looking for quite a while on Adobe's help pages, these forums, and also the PDF manual, but can't find the info I'm looking for.
    I'm moving from Final Cut Studio to the Adobe suite of video production for various reasons. I've purchased (though not yet received) the Production Premium upgrade. I have a new project I'm starting, and want to correctly size my images for Premiere Pro. For instance, Final Cut Studio has this handy chart:
    The video sequence frame size
    If you are using this format                               is                    Use graphics with this frame size
    CCIR 601 NTSC 4:3                                  720 x 486                             720 x 547
    CCIR 601 NTSC 16:9 anamorphic               720 x 486                             853 x 486
    DV NTSC 4:3                                            720 x 480                             720 x 540
    DV NTSC 16:9 anamorphic                        720 x 480                              853 x 480
    CCIR 601/DV PAL 4:3                               720 x 576                              768 x 576
    CCIR 601/DV PAL 16:9 anamorphic            720 x 576                             1024 x 576
    720p HD                                                  1280 x 720                            1280 x 720
    1080i or 1080p HD                                   1920 x 1080                          1920 x 1080
    So for a standard 4:3 DV NTSC video, I make my still images 720 x 540 pixels. 16:9 anamorphic, 853 x 480.
    For whatever reason, this type of information is completely missing in the manuals for CS5.5. I did however find this information related to Premiere Pro 4:
    4:3 DV (NTSC) or ATSC SD—create and save the square-pixel file at 720x534.
    4:3 D1 (NTSC)—create and save the square-pixel file at 720x534.
    4:3 DV or D1 (PAL)—create and save the file at 788x576.
    16:9 DV (NTSC)—create and save the file at 864x480.
    16:9 D1 (NTSC)—create and save the file at 872x486.
    16:9 DV or D1 (PAL)—create and save the file at 1050x576.
    16:9 1080i HD—create and save the file at 1920x1080.
    16:9 720p HD—create and save the file at 1280x720.
    So did this apply to CS5.5 as well? Meaning if I'm creating a standard 4:3 DV NTSC video, my still images should be 720 x 534, and 16:9 anamorphic 864 x 480? Not quite sure what the distinction is between DV and D1, other than the anamorphic sizes are different.
    I also know these are different from Final Cut Studio. In Apple's manuals, they come right out and say the pixel sizes FCS uses for stills are different from most video editing software. So I'm not surprised to see 720 x 534 for for 4:3 NTSC in Premiere Pro rather than Apple's size of 720 x 540.
    Thanks.

    The list is valid if you save the file in square pixels.
    However, I believe there is an easier way if one has
    Photoshop.
    In Photosohop, you can change the image pixel
    aspect ratio directly.  The drop down for that parameter lists common video formats.
    Change the PAR first (e.g., 1.33)  and then, using the crop tool set for the frame dimensions, e.g., 1440 x 1080.  Save the file.  Premiere will recognize the image format.  There's no reason to keep track of what the square pixel frame size is.
    You can create Photoshop Actions to somewaht automate this process.

  • IDVD image size limit

    I see that iDVD8 indicates higher resolution pictures can be used.
    What is the limit for iDVD6 ? I can not seem to locate the information or just looking/searching incorrectly.

    It says "iDVD now allows you to use higher quality photos in your slideshows, which means you’re in for an even more impressive show on that big screen TV."
    Perhaps they are talking about 16:9 format images - EXCEPT - such images are supported in iDVD 6
    See: iDVD 7.0 Help (iLife '08) - Preparing images for iDVD slideshows at http://docs.info.apple.com/article.html?path=iDVD/7.0/en/6675.html wich are the same recommendations as for iDVD 6.
    It IS possible in iDVD '08 to combine video with still images in slideshows.
    It could just be advertising hype.

  • Still image size when importing to Premiere Pro CS3

    I was wondering if someone could help me.  I do a lot of Still Image Slide shows with music and all that jazz and I used to use Premiere 6.5.  When I would import the still images I could just lock the aspect ratio and it would automatically size the picture to fit the screen.  I recently upgraded to CS3 and when I try to import a photo it imports it at actual image size so if the pic to too big it just looks zoomed in.  I'm wonder if there is a setting in I can adjust so it autosizes the pic like it did in version 6.5?  It may sound lazy but I do these with a lot of picture and I don't have time to adjust the size of each photo in Photoshop prior to import.
    I have figured out a temporary workaround where I import the files into 6.5 and then open the existing project in CS3 but my new computer runs Vista and it's not allowing me to install 6.5 on it.  I would appreciate any help.
    Thanks.

    I copied this from the help.
    Scale assets automatically
    1 Choose Edit > Preferences > General (Windows) or Premiere Pro > Preferences > General
    2 Select Default Scale To Frame Size.(Mac OS).
    3 Click OK.

  • Still image size for 16:9 video

    I want to crop and resize my images before bringing them in to PE10 on my iMac running lion. What pixel dimensions are best? The preview of my first image in the playback viewer is terrible. I used 1920 wide by 1080 high in my export settings for the image editer (Lightroom).
    Thanks,
    Mike

    Mike,
    I Scale and Crop all of my Still Images in Photoshop (PSElements works well too), to exactly the pixel x pixel dimensions of my Project's Frame Size. If one needs to Pan on a Zoomed Out Still Image, then I would calculate the Pan, and Scale/Crop to that size. You do not want to have overly-large Still Images. This ARTICLE goes into much more detail, and will show how to Automate to>Batch with Actions in PS/PSE.
    Good luck,
    Hunt

  • What is the optimum still image size for use in Premiere Pro?

    I'm pretty new to Premiere Pro so please excuse any extreme stupidity.
    I'm creating a film comprised of various interview footage. I intend to drop in stills (and possibly scan and pan around on them). The still images are coming from various sources and will have been shot on various formats.
    I requested high res images but have been asked what size I want the images to be in mm. Can anyone advise?
    The resulting film will be shown on Vimeo and on a website, but there is also further scope for high def projection possibly.  The film is HD 1080x1920
    Any advice greatly appreciated.
    Thanks

    Make sure that whoever is supplying stills is measuring them in PIXELS. Not MM, not Inches, not DPI - but PIXELS. Nothing else matters in video.
    Your "canvas" in Premiere will be 1920x1080 pixels (for 1080 HD), so that is the minimum size any still ought to be in order to fill the frame without having to scale it up (quality loss). Of course, if the image is portrait-style, then it will NOT fill the frame, but rather will have black on the sides, or replacement background as others have suggested. In that case, make sure that the height is then at least 1080 pixels (width will be narrower than 1920).
    You said you wanted to pan and scan, like Ken Burns, so then you'd want images larger than the 1920x1080, such as the 3456x2304 that was suggested. This allows you to zoom in to some degree using available pixels in the image without actually upscaling the image at all. The more you wish to zoom in, the more pixels you need to accomplish that without degrading the quality by "blowing up" the image.
    Good luck
    Jeff Pulera
    Safe Harbor Computers

  • CS6 Save for Web image size limit (Retina)

    I have been designing for a lot of mobile sites these days, in particular: iphone retina display (640w).  Most of the time these designs can be long in the tooth with the height of these documents - exceeding 8000 pixels at times.  I noticed that 8000 pixels is the threshold limit for the "save for web" export.  Anything greater than 8000 pixels will be downgraded in quality on retina devices by scaling the image.  The jpg will still be the correct height and width, but when viewed on an iphone, you can easily see the degradation.   Images and text are blurry.  This is no bueno when trying to show a client what their site will look like on an iphone.
    So my question is, is there a work around?  A preference to be changed?  Am I missing something to get the full quality of my design comp in order to preserve retina display quality?

    Justin, what about your screenshot that I'm posting here:
    You posted that as an example of SFW downsizing to 78% to make its output be no taller than 8192 px, resulting in a width of 500 px. The iPhone will scale a 500 px wide image to make it fit the screen's 640 px width.
    And my CS6 SFW set to progressive JPEG (or anything else) refuses to allow a dimension to be greater than 8192 px. Here's the message when I try to make it larger:
    Likewise, the scale percentage cannot be made greater than the value which produces a dimension of 8192 px.
    Anyway, I'm glad you found a solution.

  • FCP still image size limits? Working with still panoramics.....

    Hi all,
    I am working on a project with panoramic stills. Usually I make panos with more than 1 picture hight, lets say something like an array of 3x4 pictures, that ends in a typical resolution of something like 15.000 x 5.000. I like to make some motion with the pictures inside FCP since they are great situations to show entirely. Those pictures goes into FCP without problem, but when I tried to render them (in order to show them) get a "General Error" window......
    I tried later to test different heights in order to find if there was a limit. Initially I made them smaller and limited them up to 1080 pixels (since I am working at full HD) and they work without a problem with motion TAB inside FCP. Later I tried to make them bigger and up to 2000, 1500 and 1200 pixels height and they NOT worked, but with a test up to 1150 they worked and FCP could render them.
    Somebody knows this issue or limit?
    Is there other way to work with moving panos at FCP?
    Thanks!!

    I did several tests with different height and wide pixels and found that for wide it up to 15.000 pixels the pictures can be motioned as panos in FCP without problems.
    However, no more than 1.100 pixels wide is possible since that anoying window error just saying "General Error", as you get usually at windows OS systems.
    So the 4.000 x 4.000, from my "on field" experiencie, it is not a limit, moreover the height on those kind of pictures indeed put a limit in my panos.
    Any advice or tip?
    Appreciate!!

  • Still image sizes?

    I'm editing an HD video with several formats, 1920x1080, 1440x1080 and 1280x720. I was asked what format (TIFF, PNG, J-peg?) and size some graphics and pictures should be that will be created for the video. I would appreciate any advice.
    Thanks.

    Make the graphics the same size as your project resolution (1080 or 720 square pixels).
    You really don't have to resize the photos but if you have a lot of them it might make editing easier. If you do resize, for stills without pans and zooms make one dimension the same as the project frame size (width for landscape and height for portrait) and with pans/zooms, I'd do double the project frame's width or height.
    Russ

  • Still image size?

    Hello, Can someone please tell me the best file size and type of picture to use in a standard DV 4:3 project? Should I resize my pictures to 720x480 and if so what resolution, 72dpi or higher? Also when I capture in FCP it tells me that my audio capture does not match the project. My camera audio is set to 16bit. How do I set my project to match? It tells me that the audio might not match the video but it seems to be spot on. Thanks for your help.
    One more thing, I just installed FCS 2. When I used compressor I noticed that I get that beach ball when I try to do just about anything. Seems like every click of the mouse from one location to another causes the system to think a bit. Anyone else notice this? thanks again!

    This might help:
    http://www.dc.umich.edu/groundworks/Docs/video/importStillsFCPiMovie.pdf
    As to the install, did you do a reformat and clean install?

  • Question:  How can I change still image sizes in Program Monitor

    All of a sudden, when I create a new title, it saves it as 1920 x 1080.  But my video is only 720 x 480.  I had hoped it was just the view in the Program monitor, but I saved the project, exported it and viewed it, and sure enough, my full page titles fill the entire screen, but my video is a tiny box in the middle of it.  I have tried to change the titles properties but can't figure out how.  I then changed the export size to 720 x 480, but it didn't help.

    Correct your sequence settings or create a new sequence with the correct settings and import your existing sequence into it.

  • Still image sizes for iDVD 6 slideshows

    Here is what http://docs.info.apple.com/article.html?path=iDVD/6.0/en/17.html says about Preparing images for DVD slideshows
    If you want your images to fit the DVD window exactly, use an image-editing application to crop and resize the images to the following dimensions:
    720 x 540 pixels for standard video in NTSC format
    854 x 480 pixels for widescreen in NTSC format
    768 x 576 pixels for standard video in PAL format
    1024 x 576 pixels for widescreen in PAL format

    Thank you for the information. I will be making DVDs of photos that I take of some sports in my daughter's elementary school. These DVDs will be given to all the members on the different sports teams. What should I crop them? Thanks again.

Maybe you are looking for