STO Delivery problem with VL10B.

Dear All,
As my client required the cross-company STO. We have configured all the setting as required. But now after creating PO. While creating the Delivery with VL10B system gives below mentioned error.
Diagnosis                                                                               
When the system checked whether saving delivery was                 
    permitted, it determined that the requirements stored in             
    Define Incompletion Procedures for this document do not              
    allow this subsequent function.                                                                               
System response                                                                               
The system does not permit this subsequent function.                                                                               
Procedure                                                                               
o   If this message appears during online processing, you            
        can edit the document by choosing Edit -> Log of                 
        incomplete items.                                                
    o   If the message appeared during background processing,            
        you can analyze the problem by regenerating the                  
        delivery.                                                                               
Furhter, client is not getting any error for inter company STO.It's most required,Plz give the answer.....
Thanks.
SPT

Dear STP,
What is the error?
Post the complete System Error Log, alon with Message No.
in Your post, except Error Description, every thing is provided.
Diagnosis
When the system checked whether saving delivery was
permitted, it determined that the requirements stored in
Define Incompletion Procedures for this document do not
allow this subsequent function.
System response
The system does not permit this subsequent function.
Procedure
o If this message appears during online processing, you
can edit the document by choosing Edit -> Log of
incomplete items.
o If the message appeared during background processing,
you can analyze the problem by regenerating the
delivery.
Before Diagnosis, Error-Description along with Message No. must be there.
Best Regards,
Amit

Similar Messages

  • STO delivery date and VL10B delivery

    I'm trying to run VL10B to create a delivery for a STO item that is in stock, but no  delivery is created.
    The STO item, however, has a delivery date prior to the current date.  If I change this delivery date on the STO to a future date, the VL10B then picks up the item and creates a Delivery.
    I suspect this is related to an availability check not being performed by VL10B.  Surely I should not have to go back to STO items each time and change the delivery date.  Thoughts??

    Hi Chad
    when you try to create run VL10B, system will check with STO (Purchase Order)  delievry date. If date is falling within Delivery creation date, it will allow you to create.
    regards
    Srinivas

  • DVCProHD 720P60 delivery/problems with QT Converter settings

    Hi, I'm looking for some guidance on meeting my delivery requirements.
    Footage is DVCProHD 720p60, shot on Panasonic HVX200.
    Imported into FCP easysetup for 720p60, sequence at 23.98, anamorphic not checked.
    Clips are 23.98, 960x720, not labled as anamorpic.
    Delivery specs are: 1920x1080, 16:9
    29.97, 2:1 Interlaced
    My concerns are with maintaining the 16:9 ratio during export, changing my frame from 960x720 to 1920x1080, and the change in frame rate. I've done several test outputs using QT Conversion; the DVD I burned looked poor on my tv (jagged edges, a little choppy), and if I import the QT back into my project, the frame is 4:3. I'm fairly certain that I'm just missing the correct combination of settings in QT Converter. Any advice would be very much appreciated! Thank you!

    We are editing a 2 hour feature at 23.98 DVCPRO HD 1080i60 right now, on my 8 core. The source material was shot on the new Arrie 416 ( awesome super 16 camera, result was a print that looked shot on 35) then transfered to DVCPRO HD 1920x1080 progressive 23.98 using the DVCPRO HD 1080i60 codec and were delivered as QT movie files from the telecine house. And I believe will go back out to film.
    Since 23.98 and 29.97 both run at the same speed, I'm not sure I see the need to set the frame controls, for 23.98 projects. (which doubles or triples the conversion time) If you gave the sound mixers or composer, a 23.98 project and they set their session to 29.97, they would be in sync. Some of the frame boundaries will be different, but they will play at the same speed.
    To do a basic 29.97 conversion for sound mixing and the composer, I've found it faster to output my reels to either a QT self-contained or reference movie. and then bring those into compressor and submit it using a virtual cluster. I use the default DV NTSC settings, which has Frame Controls set to "Automatically selected: Off" and it works just fine. A 22 min reel takes less than 7 mins to convert. With FC on the conversion for a 20 min reel is anywhere between 20 to 30 mins.
    I've also used the Photo-jpeg and Apple ProRes 422 settings for better quality conversions. I just duplicated the default settings, the changed the frame rate to 29.97, set Frame controls to Automatically selected: Off, and set the frame size and aspect. Again the conversion time is about 5 to 8 mins for a 20 min reel.

  • Delivery problems with Apple Store mailing address

    Hello all,
    I just sent the following letter to Apple; I'm just wondering if anyone else has experienced the same problem (missing mailing address lines) ?
    Dear Apple,
    I'd like to point out a potential problem in Apple Store mailing addresses.
    During the past two years, I have now witnessed three (3) separate occasions, where the shipping address I give in my Apple Store order does not correctly end up in the actual mailing label.
    The most recent case was today, when I (by sheer luck) received my Logic Pro 7.2 upgrade. The address I originally gave in my order was like this:
    John Doe
    My Home Street 123
    MyCompany Ltd.
    Helsinki, 00440
    Finland
    The first line is my name, the second line the street address, the third line my company, and the last line city and zip code.
    However, the address that was in the envelope goes like this:
    John Doe
    MyCompany Ltd.
    Helsinki, 00440
    Finland
    So the problem is, that the street address never made it to the mailing label. The envelope came addressed to me and my company; no street address at all. Fortunately the local post office knew where to find us.
    I've seen this happen at least two times before, and it's always either the company name or the street address that's missing. They are not only missing from the mailing label in the envelope, they are also missing from the actual Apple Delivery Note that's inside the package. So it seems, that somewhere in your mailing process (at least for Finland) one of the address lines simply gets deleted.
    I haven't (yet) lost anything valuable, but I'm getting really uncertain if I have the courage to order anything more valuable from your web store.
    I hope you can fix this A.S.A.P. (or at least remove the extra address line from the order form, so that users won't put any crucial information into it).
    G5   Mac OS X (10.4.4)  

    You may want to give Apple a call directly in Finland at (358) 0800 96162. Posts in this forum won't usually get forwarded to the correct people, as this is merely a user to user support forum.
    Brian

  • Problem with Delivery due list VL10b for STO's - Orders not disappearing

    Hi
    We have a problem where some 'Stock Transfer orders' are not disappearing from the delivery due list VL10b
    Collective processing of documents due for delivery - Purchase orders
    hence we have had two deliveries created for one STO order, which in turn has been goods receipted
    Any ideas on what the cause of this problem could be ?
    The quantities have not been changed on the STO
    Please help
    Thanks
    Tony

    Hi
    Checked OVLP   item category     NLN    standard stock Trans item      IS relevant for picking
    Over delivery Option is blank currently - what will happen if i change to B ?
    Thanks
    Tony
    Edited by: Tony Lannon on Aug 5, 2009 3:33 PM
    Edited by: Tony Lannon on Aug 5, 2009 3:34 PM

  • Not able to do GR for STO delivery with packing.

    Hi All,
    Hi All,
    I am not able to do GR for STO delivery.
    I am getting the following error:
    Data for creating a delivery is incomplete (Vendor)
    Message no. M7279
    Business scenario:
    STO between two plants of same company code with packing material.
    Sales Org(Supp)-4444
    Sales Org(Rec)- 3333
    Plant(Supp)-2003
    Plant(Rec)-2002
    ME21N->VL10B->PGI->VF01(Proforma)->MIGO w.r.t outbound delivery(error)
    Note: PGI with packing material-separate line item generated for packing material-movement type for main material-641 and for packing material-601)
    with regards
    Azeez.Mohd

    Hi,
    When the stock is going to be moved between two plants or two storage locations that are under single company code called as stock transfer order business process. Receiving plant raises the purchase order with supplying plant; supplying plant delivers the goods to the receiving plant by raising sales order.
    Config Steps
    Create Vendor: Transaction code: XK01
    Assign Plant to Vendor
    Go to change mode of Vendor [XK02]
    Specify Vendor number that we created in the previous step
    Define shipping data for plants
    Create material by maintaining u201CPurchasingu201D view: Transaction code: MM01
    Extend the material from XXXX to YYYY plants
    As we are extending material from plant XXXX into YYYY plant, system copies all the data into the new plant.So that we have to change the delivering plant in delivering plant field as YYYY in Sales: Sales organization data 1 view.
    Create Purchase order: Transaction code: ME21N
    Activities due for Shipping (Purchase order fast display): Transaction code: VL10B
    Display stock in transit: Transaction code: MB5T
    Goods receipt: Transaction code: MIGO
    Stock movement types: INTRAand INTER
     INTRA
    Stand order type (Document type) = UB
    Delivery type = NL
    Determination of document type:
    Supplying plant + Receiving plant = UB
    Supplying plant + UB = NL
    Movement types:
                      Issuing plant Receiving plant
    Single step    647                        101
    Two step        641                        101
     INTER
    Standard order type (Document type) = NB
    Delivery type = NLCC
    Determination of document type:
    Supplying plant + Receiving plant = NB
    Supplying plant + NB = NLCC
    Movement types:
                            Issuing plant Receiving plant
    Single step              645               101
    Two step                 643                101
    PBXX is the Gross price condition type for Stock Transfer Order
    Vendor = Supplying plant
    Customer = Receiving plant
    NOTE: In single step method updations takes place in both plats simultaneously.
    In two-step method updations should takes place manually.

  • Problem with IDoc for an outbound delivery

    Dear All,
    I am facing a problem with the IDoc defined for an outbound delivery.
    Scenario:
    Implementation of a small enhancement for an IDoc (DESADV, DELVRY01) created for an outbound delivery (in VL02N).
    What I did:
    I implemented the EXIT_SAPLV56K_002 exit in the V56K0001 enhancement, activated in SMOD, assigned V56K0001 component in CMOD and acivated it. Then I put a breakpoint on the ZXTRKU02 include. For me everything in SMOD and CMOD looks OK.
    I have also created a partner profile, port, outbound message config. (message DESADV, basic type DELVRY01, application V2, output message type LAVA, process code DELV. function module used for this process code is IDOC_OUTPUT_DELVRY).
    What I can do:
    I can issue an IDoc message, it looks ok and contains the standard data.
    Problem:
    It seems that the enhancement does not work. Finally I put there only one line of code to avoid a program bug and just to check . The system does not stop at the breakpoint (set on the ZXTRKU02 include in the EXIT_SAPLV56K_002 exit).
    Am I using the proper exit? I appreciate any suggestions.
    Thanks,
    Grzegorz Skorus

    Hello Grzegorz
    Not an expert on this, but noone is responding so I thought let me try and help you. You seem to be doing the right things as mentioned in OSS note 1498409.
    Firstly since this can be called form Shipment Idoc also, you may need to make a differentiation by the interface parameter 'MESSAGE_TYPE' or segment name. See the attached OSS note, though it belongs to older releases,  it may help you.
    Also help says 'The callup of this function module is programmed for each enhancement of the internal table for the IDoc (in other words, when you add an extra segment'. So may be you need to add an extra segment/field to make it work.
    Futher  the user exits are replaced by BADIs. May be you should use exit_badi_v56k.
    Hope this helps and others will pitch in.
    1498409 - Valuation Type unavailable when creating deliveries using IDOC
    631913 - Exit after formatting delivery IDoc type DELVRY

  • Problem with MM Scheduling Agreement Inbound Delivery

    Hello all Gurus,
    I have a problem with inbound delivery. Whenever I am trying to create inbound delivery in VL31N with the total open quantity of MM scheduling agreement, I am getting a warning message as below
    "Notified quantity less than goods receipt quantity".
    If the quantity was less then 80, then I should get this message.
    But the total open quantity in MM Scheduling agreement in ME38 is 80. So when I am creating the inbound delivery for 80, why system is giving me this warning message????
    Kindly advise whether we have to maintain any settings anywhere or am I missing something here.
    Thanks and Regards,
    Umakanth.

    Got the result.

  • TS3276 problem with mail delivery

    has anyone else gotten a "problem during delivery processing" message with each outgoing message? it just randomly started happening to me this morning.  it says my message was sent but the reason:  Error in sieve filter: Notify mailto: recipient is not a valid address
    one comes from postmaster@mac and one comes from Internet Mail Delivery....

    My Wife and I both have an Ipad and an iPhone, I use an iMac and my wife a MacBook Pro.
    I have this problem with all my devices.
    My wife has NOT got this problem.
    We both use a [email protected] email acount.
    Just compared the settings:
    For "Incoming server" I have p03-imap.mail.me.com
    My Wife has p02-imap.mail.me.com .... and has not got this problem.
    I have setup a new rule for incoming mails (for the meantime):
    move all incoming emails from [email protected] to trash and delete it.
    Works fine for now,......until APPLE deals with the problem.
    Message was edited by: RTONLINE

  • Problems within VL10b (delivery is NOT created)

    Hi guys,
    I'm experiencing problems within VL10b.
    I created a cross-company purchase order with all the necessary data. If I open VL10b and select the order (by date or order number... both works) it is shown just fine. BUT when I click the button for background creation, it doesn't work.
    There's no log or error-message, just nothing which would give me a hint about what's the problem.
    Anybody got any ideas what to check in order to find out where's the problem?
    Any input is greatly appreciated... thx & regards,
    Bobby

    Jürgen,
    I checked the log already beforehand (and got disappointed).... here is what the system says:
    Diagnosis
        An error has occured while delivering the order items in the
        background that cannot be processed in the program.
    System Response
        The system does not generate any deliveries.
    Procedure
        Try to correct the error, described in the next error
        message, or try to deliver order  that has caused it with
        ship-to party .
    Procedure for System Administration
    Regards,
    B.

  • Problem with Delivery IDOC staus 51

    Hi all,
    I have problem with Delivery IDOC.
    An IDOC is sent from the logistics provider with reference to a manually created delivery, which creates another IDOC & another partial delivery.
    The second IDOC created then confirms the partial delivery created by the first IDOC.
    When IDOC try to confirm this delivery, it goes to status 51 with error " Delivery does not exist".
    In some case IDOC was correctly processed & confirmed the delivery.
    In some cases it went wrong.
    Any ideas regarding this?

    Hi Suneel,
    It seems there is timing issue between the first IDoc and second IDoc.
    When the first IDoc has not yet commit to DB then the second IDoc tries to process with reference to the first IDoc.
    Is there any that can distinguish between 1st and 2nd IDocs?
    In other word, can you post the second IDoc within minutes delay?
    Just my two cents.
    Regards,
    Ferry Lianto

  • Problem with Submit statement into print program for delivery

    Hi all,
    i got a problem with the SUBMIT statement that i put into a print program associated to a delivery output message.
    If i print the message by VL02N or VL71, everything works.
    But if i associate the output with RV56ABST, the SUBMIT instruction isn't accepted and i get the message
    "Processor ABAP: POSTING_ILLEGAL_STATEMENT"
    There is any solution to this situation?
    Why i cannot use the SUBMIT statement in this case?

    Hi Simone,
    you could try to do the operation in a separate task (call a function in starting new task). This will decouple your current process from the new task.
    Cheers,
    Stefan.

  • Mail delivery error with 5510 e-print. updates and connection are ok. friend has same problem.

    I have checked all of the updates and connections for my new printer.  As far as I can tell, I've checked everything that needs to be checked and all is good.  But, I still get the Mail Delivery error when e-printing.  And my friend has the same problem with her new 5510 b111a.  What could possibly be the problem?  Regular printing, scanning and so on work fine with my wireless connection.
    This question was solved.
    View Solution.

    So it sounds like it may be an Issue with the provided Email Address from your internet service provider, you are sending from ,
    What i would suggest as a test is to create a Email account either with g mail and or yahoo, and try to send the email to your eprint account/Email, and see if it accepts the email also, make sure you have your printer set to Accept email from all users you can do this by logging into Eprint Center and then going into these settings and selecting that option
    I am an HP employee.
    __ if this Solution has helped Please Mark as Resolved and feel free to Provide a Kudos__

  • Stock transfer order (STO) Without delivery and With delivery?

    Hi experts,
    Could any body explain step by step procedure
    Stock transfer order (STO) Without delivery and With delivery?
    Thanks
    Reddy

    Hi
    Stock Transport Order Without SD Delivery.
    U dont have to maintian sales view for the materials.
    1. Extend the material to those 2 plants.
    2. Create UB purch document.
    3. Goods issue wrt to the STO in the supplying plant ( 351 mvt type).
    4. Good Receipt in the receiving plant ( 101 mvt type ).
    5. Invoice verified (MIRO).
    U should have specific pricing procedure for STO. In MEK0 u have to choose the appropriate pricing procedure with the accrual key linked for freight charges.
    Vishal...

  • Problems with Mac email. Friends getting failed delivery notifications.

    Hi. Just logging into Apple community for the first time. I have a Mac Book Air. Contacts are saying that they have problems emailing me. I'm just using the standard Mac email. They say they are getting failed delivery messages. Is there anything I can do?

    Welcome!
    This is most probably a problem that should be addressed to your mail service provider. I doubt very much it is a problem with your Mac.
    You could try sending yourself an email. If that "bounces" back to you as undeliverable it would be useful information to give your MSP.
    Good luck.

Maybe you are looking for