STO - Two plants within Different Company Codes

Hello,
Kindly help me out with this case, i want to create a STO for two plants within DIFFERENT company codes, so i've created all the required configuration and master data including creating the supplying plant as a vendor and the ordering plant as a customer, also all master data is maintained in both plants and i tried the scenario on the IDES system and it works okay so i know i'm on the right procedures. The problem is that i create the PO, but when i go to Transaction Code VL10B to create the delivery it gives me an error ( Delivery with no Line item not allowed ) even though there is more than enough stock in the storage location. Kindly help me out.

17.01.2010     Stock                            10.500,000      0,000      10.300,000
13.01.2010     Order     Totals record     100,000-     100,000      10.300,000
13.01.2010     Deliv.     Totals record     100,000-     100,000      10.300,000
17.01.2010     StLcSt     SLFR     10.500,000      0,000      10.300,000
13.01.2010     Order     Totals record     100,000-     100,000      10.300,000
13.01.2010     Deliv.     Totals record     100,000-     100,000      10.300,000
17.01.2010     BtchSt     123     10.500,000      0,000      10.400,000
13.01.2010     Deliv.     Totals record     100,000-     100,000      10.400,000
17.01.2010     BStLoc     123       /SLFR     10.500,000      0,000      10.400,000
13.01.2010     Deliv.     Totals record     100,000-     100,000      10.400,000
This is the whole table.
This is what i got. i believe that it is an availability check problem, i just can't see what is the solution.
SLFR is the Storage location of the issuing plant.

Similar Messages

Stock Transfer Between two plants within same company code

Hello,
We are using scenario-'Stock transfer between two plants within same company code. Scenaro is like Plant A is receving plant and Plant B is delivering Plant.
Plant A release PO for 100 nos to Plant B
Plant B issues 100 nos (via delivery) to Plant A
But Plant A receives only 50 nos physically so they do Goods receipt for 50 nos , but document got generated for 100 nos (when plant B issues material).
Now Plant A do not want to receive remaining 50 nos physically, but wants to reduce material document which got created when goods issue posted by plant B
Now stock in transis (mb5t) is 50 nos.
How to reduce this material document. or any another alternative solution for this?
Thanks,
Shailesh

Hi There
Reversal of partial is not possible ,
But you can use the Mov Type 557 and 558 to do the adjustments in Stock in transit qty
Few more details on STO adjustments
Hi There
it can be settle in many ways,,,
1. Receive the goods as 100 and Scrap the 50 nos from the received plant,,- If the receiving plant is responsible
2.Revert the PGI/Transfer movement(Vl09) and send the 50 nos again from the supplying plant- of the Supplying plant is responsible,
3.Also we have the movement type 557 and 558 without doing the above two steps you can correct the qty from stock in transit itself,,
4. also you can check the below similar thread
STO - material lost during tranfer from plant A to plant B
5. If above are not ok, then receive the goods as 100, And raise the STO as your plant as supplying plant and receiving plant is (Supplied 50 nos less) plant,, Do the process without sending the material.. in this way that 50 nos can be adjusted,,
6.Here is some more details
557 Issue from stock in transit (adjustment posting)
Only use this movement type (also the reversal movement type) under the following circumstances:
Using movement type 557, you can correct purchase-order-independent stock in transit if
- a good receipt cannot be posted to a purchase order without stock in transit, even though there is still stock in transit according to the purchase order history
- stock in transit still exists, even though there are no open stock transfer orders for the particular material
This movement type may ONLY be used in the cases mentioned above after careful analysis, to correct stock in transit that has rounding errors.
This movement type may not be copied.
Note!
Before using this movement type, note the following:
- 392205 Analysis stock in transit / Correction if split valuation
Possible special stock indicators:
E, Q
7. As previous post says if you have the note for this issue you can use that also
You can use any one of the way to solve the issue, Hope it helps
Cheers
Senthil P

Stock transfer between two plants within same company code at price

Hello,
Hello
I have a scenarios. One plant is selling a part to other plant at a margin. Both plants belongs to the same legal entity.
How can I map this scenario in SAP?
What will be the cost of my part in these two plants?
What mechanism I would use to transfer the stock from supplying plant to the buying plant?
Your urgent reply is appreciated.
Thanks,

Hi Pream
You can do it through Intra Company STO, but in this scnerio the libility never gets generated to the receiving plant because it is transfer from one pocket to other. but you can always transfer the goods on the assessable valu. you have to maintain the ***. value in J1ID, then while bill system picks the same ***. value in UTXJ condition.
But if you want to salel at a margin then use SO-PO i.e. create PO from receiving plant and against sale order, do the delivery of the material to the respective plant.
I think this will help you.
In case of any qurty feel free to contact
Girish

Price in stock tranfer order between plants within a company code

hi, expert,
may i input a price different from valuation price whent create a STO between plants within a compayn code?
please give me some clue? thx.
Best wishes,
David

Hi David,
What is ur query exactly?
If u want to give any rate in STO, u can configure the condition type used in STO pricing procedure accordingly.
If u give conditin category as "G" in condition type, then only system will pick up the valuated price of the item. If u want to create STO with any other rate, maintain condition category as "H" and make "manual entries possible" in condition type
If ur two plants are in India, as per the Indian Excise Law, there should be some value addition when u do stock transfer from one plant to another plant. That is the reason, we normally give value addition also in the pricing procedure
Hope this will resolve ur query

Urgent: Maintain std cost for plants under different company codes

Hi all,
Company code(s)/Plant(s): C1/P1, C2/P2, ..., CnPn
BOMs and Routings are maintained under P1. I believe that unlike BOM routing can't be made available across plants. So how does one maintain std cost across plants under different company codes?
Thanks.

Hi,
You have to maintain individual BOM, Routing and varaint for all plants.
Best Regards
Ashish Jain

Single Purchase Order for different Plants of Different Company Codes

Hi Experts,
I have a scenario, My Client has 3 Company Codes (1000, 2000, 3000 )
Company Code 1000 has 2-Plants    ( A001 and A002 )
Company Code 2000 has 1-Plant      ( B001 )
Comapny Code 3000 has 3-Plants   ( C001, C002, C003 )
All these 3-Company codes has centralised purchase organisation.
My Client requirement is to raise a single purchase order for external vendor, for all the plants A001, A002 which is in one company code and similarly in same Purchase Order for B001 plant which belongs to 2000 Company Code and Similarly for same purchase order for C001, C002, C003 plant which belongs to 3000 Company Code.
1)Is it possible to raise a Single Purchase to External Vendor for plants of Different Company Codes ?
2)Does it affect the accounting document ?
3)How to inward and where to inward these goods ? with respect to plant wise ?
Please Guide with Valuable inputs.
Thanks in Advance
Best Regards
Javeed
Best regards
Javeed Ahamed

1) How about Profit Centre ? We have Framed each Profit Centre with respect to Plant
Why should there be a problem?
2)In Case of Migo does we have to be careful and do stepwise MIGO with respect to different Plants ?
of course people have to be careful when performing transactions.
if you have multiple items in a PO then you can easily receive all items in one go. So people have to careful and need to check if they really received each of the PO items. Especially if people have authorization for many plants, then the user who is usually performing the receipts for plant A can easily post the receipts of plant B too.
3) How to Process MIRO ? Can we process Partial MIRO"S with respect to Line-items of those particular Plants ?
MIRO allows to post the invoice like it is send to you from your vendor. If it is just for a part of your PO then this is just a fact and MIRO allows to post this kind of invoices too.

Can we give same Excise Group to two diff. Plant within same company code

Hi,
Can anyone please tell that whether we can assign same Excise Group to two different plants within the same company code in SAP.
Regards,

Yes you can use but, you shouldn't use same excise group for two different plants in one company code, if their physical location is different.
As many excise report are fetched on the basis of excise group, there it will show combined values for both plants, whcih may not be acceptable to exices authorities.
Regards,
Sachendra Singh

Same WareHouse Assigned to different plants under different company codes

Hi Guys,
I assigned a warehouse to two different storage location under two plants under two different company codes. I did do the movement in one plant and i could do TR and TO
but when i post a material movement in other one. I cant c the TR created for the next one.
Any idea y?
thanks a bunch

Yes i did extend the material master for both the plants and extended to the warehouse too...
pls help
thanks a bunch for the reply

Stock transfer between two plants in same company code at price

Hello,
Hello,
I have a scenarios. One plant is selling a part to other plant at a margin. Both plants belongs to the same legal entity.
How can I map this scenario in SAP?
What will be the cost of my part in these two plants?
What mechanism I would use to transfer the stock from supplying plant to the buying plant?
Your urgent reply is appreciated.
Thanks,

Prem,
Yes, for this scenario, you will have to implement EC-PCA. This is different from CO-PA.
Detailed information can be found in http://help.sap.com/saphelp_erp2005vp/helpdata/en/eb/13759643c411d1896f0000e8322d00/frameset.htm
The Stock valuation is different from MM and PCA point of view. Stock Transfer within Co Code does not have any effect on the Stock value from MM point of view. The Stock value changes only from the PCA point of view. The solution works the same way with Standard Cost also. Your Standard Cost can remain the same in both the Plants.
The PCA entries are triggered by the Profit Centre data in Material Master. The Profit Centres should be different for both the Plants.
Hope this clarifies.
Thanks

How to create group bom for multiple plants with different company codes

Dear all,
In my current scenario we have 5 Company codes with a plant with each company. The same kind of materials exist in all the 5 plants, so what i want is when i create any BOM, that BOM has to extend in all the company codes, as with GROUP BOM i can able to extend the same in only one company code.
So how to do this?
Thanks in Advance
Bhushan

For that first extend all the materials to all the plants... In one plant create a BOM for the material..
In all other polants in CS01, click COpy from .. There you mention the matreial and the plant in which the BOm is alerady available..
karthick

Plants within a company code

Hi
Please tell me the table to get the plants assigned to a given company code?
Thanks & Best Regards
Rupesh

Check table T001K
Assign plant (valuation area) to company code
Cheers
Dheeraj

Billing in Stock Transfer between two plants of two different company codes

Hi Friends,
I am doing the scenario of stock transfer between two plants of different company codes.
I have some issues in Billing for this..
What are the settings do i need to to for Pricing in SD point of view.
Ex:
Supplying         /         Receiving
Com.Code:2000     /        CompanyCode:1000
Plant:2100              /         Plant:1100
SA:2000/10/00      /          SA:1000/10/00
I created Customer 5555 w.r.t sales area of supplying company code (2000/10/00)
I created Vendor 7777 and assigned Supplying Plant 2100 in add purchasing data.
In IMG Settings:
Define Shipping Data for Plants: In Receving Plant i assigned customer 5555 and sales area blank
                                                    In Supplying Plant i assigned customer blank and sales area as 2000/10/00
Create Checking Rule: Standard(B SD Delivery)
Define Checking Rule: Standard(Avallability-01assigned to checking rule B)
Assign Delivery Type and Checking rule: Document type(NB)-Supplying Plant(2100)-Delivery Type(NLCC)-Checking Rule-(B)
Assign Doc Type:Supplying Plant(2100)-Receving Plant(1100)-Doc type(NB)
What are Pricing settings in SD i have to do?????????
Process:
ME21N->VL10B->VL02N(PGI)->VF01(IV)->MIGO->MIRO
I have gone through many threads in Forum but confusion in Pricing Part..
Some are mixing with the inter company sales proces..
Pls guide me..
With Regards

Do the following steps for STO Customizing:-
1. Create a customer master record for the issuing plant.
2. Create a vendor master record for the issuing plant, and enter customer account number in the Customer field on the Control screen.
3. Repeat steps 1 and 2 for the receiving plant.
4. Assign the plants to the customer master record in Customizing for Materials Management (MM), by choosing Purchasing <Purchase Order < Set Up Stock Transport Order< Plants.
The Process Flow would be as follows :-
Create a stock transport order, following the standard procedure, and send the order to the issuing plant.
Issuing plant has processes your order, and when it is ready to ship,the storeperson at the issuing plant issues the goods using a transfer posting. The excise clerk there creates an excise invoice.The excise supervisor verifies and posts the excise invoice.It then sends the goods to you, together with the excise invoice.
Once the goods arrive, you follow the standard procedure for incoming excise invoices:
The excise clerk captures the excise invoice, using the stock transport order as the reference document. The storeperson enters the goods receipt, again using the stock transport order as the reference document.Alternatively, you can first enter the goods receipt and then capture the excise invoice.
The excise supervisor then posts the excise invoice.
Best Regards,
Ankur

Can Equipment No same for 2 Equip in different Plants of same company code?

Hi Gurus,
            Please tell me if there is any possibility of having same Equipment No for 2 Equipments in Different Plants.
            The 2 plants are in the Same Company code.
            e.g. Equip           Plant                Company Code
               1) Equip_DIE    Plant1              A
               2) Equip_DIE    Plant2              A
           If it is possible how the Equipment histroy and Breakdown history is updated in the PMIS.
           Also tell me the advantages and Disadvantages of keeping same Equipment no for 2 diiferernt Equipments or otherwise keeping different equipment no.
With best regards,
Narendra Dere

Hi Pete ,
          Thanks for your valuable reply.
          Actually I am doing implementation for 5 plants within same Company Code.
          They are geographically distant (say 50km from each Other.)
          The Finish Product is same but the method is different.
          They have already assigned some Equipment Numbers in the Plant for Regular Maintenance Activities.
          Since Planning and Maintenance can be done at the different Plant and team of the MAintenance is different, they dont hv anyproblem if equipment number is same. Otherway they wll have the added advantage that they can continue with there own Equipment no which can be same in differnt Plant.
       e.g 800TONPRESS - Plant1
            800TONPRESS - Plant 2.
   With best regards,
   Narendra Dere

Inter company STO wtih two different company codes

Hello expert,
I am doing inter company stock transfer between two plants that belongs to two different company code. Can someone tell me if my settings are correct
Plant-A (S.org- X, DC-10, D-00) and CC-A
Plant- B (S.org-Y, DC-10, D00) and CC-B
Deinfe shipping data for Plant u2013A
u2022     Plant u2013A
u2022     Customer u2013B
u2022     Sales Org-X
u2022     DC 10
u2022     D 00
u2022     Under Control data tab, Vendor = A
Define shipping data for plant u2013B
u2022     Plant u2013B
u2022     Customer u2013A
u2022     Sales Org-Y
u2022     DC 10
u2022     D 00
u2022     Under control data tab, Vendor = B
Customer Master for Plant -A
u2022     Customer-A
u2022     CC-B
u2022     S.org-Y
u2022     DC -10
u2022     D-00
Customer Master for Plant -B
u2022     Customer-B
u2022     CC-A
u2022     S.org-X
u2022     DC -10
u2022     D-00
Vendor Master for Plant u2013A
u2022     Vendor u2013A
u2022     CC- B
u2022     P.org = 1000
u2022     Additional purch data/Extrac = A
u2022     Under control tab, Customer = A
Vendor Master for Plant u2013B
u2022     Vendor u2013B
u2022     CC- A
u2022     P.org = 1000
u2022     Additional purch data/Extrac = B
u2022     Under control tab, Customer = B
When i try to create a STO with document type NB, it says shipping data can't be determinded. Ofcourse , the material is being maintained for both plant with sales data. thank you so much for ur help.

this is because of of shipping point is not determined, maintain shipping point for the following combination
1)The shipping conditions from the customer master record (Shipping screen)
2) The loading group from the material master record (Sales/Plant Data screen)
3)The delivering plant
Regards,
Bala

STO-Within same company code and same sales organisation

hi freinds
i need steps for STO Within same company code and same sales organisation "xyz" with different plant "X " and " Y"
with regards
dinesh

Hi,
Sales organization is linked to sending plant. It does not matter if receiving plant is using the same or different sales organization. The setup from sending plant is independent from that.
As for the STO standard setup, I suggest you search SDN first. Below example link.
STO setup article link:
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/c05e2251-91f0-2c10-4e91-e919468e4687
Regards,
Dominik Modrzejewski

STO - Two plants within Different Company Codes

Similar Messages

Maybe you are looking for