Stock issue at zero price

Hello,
I am facing one problem. Price control indicator in material master is S. I have uploaded stock with quantity 5 at zero price. After uploaded, i set the standard price to Rs. 15/-in material master. While issuing the material from stock for delivery i require to issue it at zero cost, whether it is possible? I don't want to change my standard price.
Plz. help me whether it is possible to do this and if yes how to do it.
Suitable answer will be rewarded.
Thanks
Veena

Hi
If requirement generation is at different WBS element then how can you issue the stock from other WBS element in a single transaction? This is not possible. However try with requirement grouping (4th level to 3rd level) concept.

Similar Messages

Change stock level to zero

Hello to all,
I wanted to change stock level in SAP to 0. This is for test purposes and replication of issue that I have. Can anyone help? Thanks.
Regards.

Hi,
Identify a cost centre.
1. Create a reservation using MB21 with 201 mvt type and the identified cost centre with quanity equal to the stock availability
2. Create a MB1A ( Goods issue ) with respect to the reservation and note down the material document number.
3. Test your scenario ( as the stock will be zero )
4. Once the test is over, go to MIGO and select cancellation with material document number option and give the document number noted down in step 2 and check and post the transaction.
Regards,
DilliB

Last Date on which stock Qty was zero

Dear Gurus,
LIS structure S032 can tell us the date of last GR,Cons., Iss. & movement date. is there any field which tell us the last date on which stock qty was zero ?
Regards,
FR

Dear Bijay Pradhan,
Thank you so much for your response, actualy we are using MCBA to desing a report by which we are determining the data since then the nmaterial has not consumed but we are facing the problem when consuption made and after consumption stock was zero and after 4 or 5 month only GR made but no consumption made so when we generate report then system shows that the material has not consumed since last 4 or 5 months whcih is wrong because if no consumption made after the stock was zero then system should consider GR date for our report.
can you plz guide me how to resolve the issue?
Thanks & regards,
FR

Stock Issue/Receipt Values in 0IC_C03 not matchin with MC.9

Hi Experts,
We are facing a certain mismatch problem in our Inventory Cube
(0IC_C03) stock issue and receipt values. They are showing a huge
difference with the issue and receipt values in ECC Report MC.9.
Also please note that the Quantities in the cube are matching exactly
with MC.9 but not values.
On further search , we also noted that the Plant wise Values and
quantities in BW are exactly matching with certain infostructures
(S031, S033) but not with MC.9 in ECC Production.
Can anyone please let us know how can we check the plant wise
issue/Receipt values ?
Also, We replicated the same senario in Quality system and did an
inventory
cube Reload . But it still showed the same discrepencies from MC.9 for the given material and period.
Regards

Dear AL,
There is not failed request and the cube, and the loading is correct.
Also we replicated the same on Quality, and did a complete Reload for the cube and it still gave the same difference.
Kindly let me know how can we check the issue and recept values from PSA of Revaluations Extractor??
Dear Shashank,
We are using standard logistics extractor 2LIS_03_UM for the cube.
Along with 2LIS_03_BX & 2LIS_03_BF.
Regards,
Edited by: BhaminiJ on Aug 3, 2011 1:33 PM

PO with zero price

Hi All,
Is there a way to create PO with zero price?? I don't want to tick "Free" check box.
Regards
Karan

Not possible ,you can create Consignment PO with item category K with Zero price other than Free goods check.

Bapi_salesorder_createfromdat2, zero price in conditions

Hi,
I create salesorder with bapi_salesorder_createfromdat2 and give price for material in ORDER_CONDITION_IN table. When price is >0 it works OK. But I need in some cases to create orderline with 0 (zero) price. When entering 0 in COND_VALUE field it is not taken into account, instead SAP takes listprice for this line.
When using VA01 to manually change item price to zero, it works OK.
Does anybody have experience with this?
br,
erki

I usually do not send ORDER_CONDITIONS_INX (or any .._INX) at all. But I tried with:
ORDER_CONDITIONS_INX-COND_VALUE = 'X'.
ORDER_CONDITIONS_INX-UPDATEFLAG = 'X'.
and just
ORDER_CONDITIONS_INX-COND_VALUE = 'X'.
and it makes no difference. Always when COND_VALUE is zero listprice is taken.
Any more suggestions?

Zero Price Item In Shopping Cart - where is IR flag in Shopping Cart?

HI,
I am relatively new SRM user.
I am interested in knowing how can I manually post the shopping cart with zero price to create a free of charge PO in back end? I believe there is IR flag in Shopping cart but I am not able to get where that IR flag is in shopping cart.
Please help me with the transaction & steps for removing IR flag in shopping cart.
Thanks
Nim

Hello Nim,
As written previously, if you created a Shopping Cart with a zero total value, as Invoice Receipt Expected flag comes from vendor data, according to vendor purchasing organization (tab 'Vendor Data' in "Manages Business Partner" web transaction), you won't be able to create Purchase Order if this flag is set: error message BBP_PD 045 will be displayed.
So, you have two alternatives.
a- First, you unset the flag for the concerned vendor. However, doing this, you won't be able to create purchasing document with total value upper than zero (same error message BBP_PD 045 will be raised)
b- Second, as no BAdI allows to manage further procurement information such as 'Invoice Receipt Expected', you will have to make some standard modifications.
Regards.
Laurent Burtaire.

Require ability to enter a zero price on service line items

We have a need to create a service purchase order (item category 'D') with one line item using account assignment 'P'. We're creating as a 'limit' Purchase order and intend to create more than one service entry sheet. For example - the total expected services on the PO can be $20,000, and we will post service entry sheets weekly until the $20,000 is depleted.
Each service entry sheet will have multiple lines... some lines will include a price, and a some will need to have a zero price since the particular service was free and we'd like to acknowledge it as such. When entering a zero price on the line item on the service entry sheet, error message SE316 appears and we are forced to enter a price. When attempting to modify the line type to 'informatory' the 'informatory' radio button is grayed out and we do not have the option to change.
Please let me know if the scenario above is possible, and if so, please provide recommendation on how to accomplish.
Thank you
Marita Hernandez

HI,
you can not create free service PO in sap
for more check following link
[http://forums.sdn.sap.com/thread.jspa?threadID=1405217]
Regards
Kailas Ugale

Stored Procedure for Zero Price in GRPO

Hi all,
Can anybody let me know the required stored procedure for restricting zero price in the GRPO transaction .
Thanks in advance ,
Aditya

Use this in your SBO_SP_TransactionNotification
IF @transaction_type = 'A' AND @object_type = '20'
BEGIN
IF EXISTS (SELECT T0.ItemCode FROM [dbo\].[PDN1\] T0
WHERE (T0.Price = 0 OR T0.Price IS NULL) AND T0.DocEntry = @list_of_cols_val_tab_del
BEGIN
SELECT @Error = 1, @error_message = 'Item without Price'
END
END
Suda

Issue of zero bonds 04J Negative balance TRQ0001

In FTR_CREATE I do a sale (transaction 200 Zero bond -Sale)/ issue of zero bonds 04J. I get error:
"Per 19.02.2012 a negative balance of 100.000,00- PLN Nominal exists
Message no. TRQ0001". I allowed short sales for the company code.

Hi,
Dont use prodcut type 04j for issue of bond. Use product type 04X (Issue: Fixed Interest Bonds) and 04Y (Issue: Variable Interest Bonds) for issue of bond with proper transaction type 300 and 400.
Regards
Brijendra

Purchase order with zero price

hello
is i possible to create pos with zero price. i have a scenario that i need to create po with out paying to vendor.
please help
regards

Hi,
If yours is a Free Goods Scenario. Then Mark the Free Item Tab ( Next to Returns) in the Purchase Order detail tab.
Now you can create a Purchase order with Zero Price. By the time GR thru. 511 Mov. Type (Material receipt with out charge) you can receive the material.
Reg,
Ashok
Rewards Welcome.

Stock issued to consumption

dear friends,
how can we see the stock/quantity issued to cost centre.
i.e if we issue 10nos.(quantity) to a particular cost centre, then how to ensure that the number of quantity is there in the cost centre.
thanks

thanks sanjay,
that was very helpful.
But i am running a scenario where i am getting the material directly to the production line. i have maintained cost centre as supply areas. now when the vendor sends me material, i can directly issue it to the cost centre i.e it is directly going to the production line.
Through MB51 i can c the stocks in the respective cost centre.
I WANT TO KNOW
1) " whether the stocks issued to cost centre are updated...?" or are they considered as consumed
2) further the material(X) issued to cost centre is a component for material(Y). now when i take the material in for material (Y), i.e when i confirm the production order for material(Y) and receive goods through MB31, does the material(X) disappears from the cost centre.
thanks

OPENING STOCK ISSU

Dear All
One of my client had feeded the opening stock at wrong unit price,now he realised that,so to rectify i suggest him to nullfy the entry by entering qty in minus with same wrong unit price but here it is considering the current cost even giving the unit price manually in opening stock.
I kindly suggest hw to resolve this.
Regards
M Auditya

Hi Auditya,
    You can see the JE of First time entered Opening Balance, Also you can see JE which you had rectified by Minus Qty.
    There should be one Inventory G/L, It was Debited at first OB transaction by 100 INR,
    And second should be Suspense G/L, It was Credited by 100 INR,
Now,
    When you rectified OB by minus Qty. at that time bellow JE may be done,
     Suspense A/c. was Debited by 110 INR
     And Inventory A/c. was Credited by 110 INR,
So you have to pass one manual JE with reference to above transaction like -
     Suspense A/c. will Credited by 10 INR and Inventory A/c. will Debited by 10 INR
After that all now you have to add new actual OB for that item
Regards,
Siddique Shaikh.

Issue with items that really do have a 0 (zero) price.

If we have items that have a price of 0. SAP allows us to enter this in price lists but does not agree when we use this item on an order because it does not accept that the price is 0.
Please tell us what we should do. I do not like the solution of putting a price of 0.01 in because it will look messy on our invoices if we have to apply a 100% discount to put it at 0.

Hi,
What item is that in your Sales Order that has zero value?
It is recommended that you should use Free Goods Pricing for this item in your sales order as Allen have suggested.
This would solve your problem..
Thanks.
Rgds.

Billing document from delivery document has zero price

Hi. Any ideas on how I can correct this?
I have a scenario where I generate a Sales Order, create a project and assign the project to the sales order. We then assign materials to the project and generate PRs which we convert to POs and then post GR making it a project stock.
These materials upon receipt are delivered to clients via the process in CNS0 (delivery from project). We then carry out a picking and post goods issue. Next we bill based on the delivery document created earlier when goods issue is posted.
When the billing documents is generated, it has no prices even though prices are maintained in the sales order. How do I get the delivery document to determine prices from the sales order created earlier?

Hi
Its seems that your sales order quantity billing issue has been solved.If it is solved then kindly share with us,how the problem has been solved.As there prices are not picking in the billing document, so please check the pricing type that has been maintained in the VTFL copy control.Secondly also check in VOV7 wheather item category is relevant for pricing has been maintained or not.
You get the delivery document to determine prices from sales order to delivery through copy controls.
Regards
Srinath

Stock issue at zero price

Similar Messages

Maybe you are looking for