Stock posting in block stock after grn for source inspection

Hi All,
I have following scenario
I am doing source inspection at vendor site i have maintained control key 0005 in material master & necessary certificate with certificate check required at GRN & UD stage
i am creating a source inspection lot for a release po through t.code qi07 & then processing that lot before GRN
Now when i am doing GRN for same PO it is giving me the following message  stage
<b>A category ZC01(user sp. category) inspected certificate is required</b>
Message no. QA312
Diagnosis
An inspected certificate must exist at the first goods receipt for a purchase order item.
Procedure
Check whether a suitable certificate exists for the purchase order and delivery, and create a certificate record with the status "Certificate checked and stored".
If there is no certificate or no suitable certificate, this does not comply with the requirements in the material master record. If there is no inspection lot for this goods movement, the system posts the quantity to blocked stock or does not post the goods receipt.
If you have created an inspection lot, the system marks the certificate check with the status "In lot". You must confirm the availability of an inspected certificate by the time you make the usage decision.
after doing the GRN stock is being posted to block stock
if i do not process the source inspection lot then the stock is posted to quality stock but this does fulfill the requirement of source inspection
plz suggest soultion
It's urgent
Regards
Ashutosh Shende
9860681314

Hello Ashutosh,
In the material master you have defined certificate type with the customizing setting indicator for  'Enhanced Certificate Processing' active.
If you set this indicator, extended certificate processing is active for
this certificate type. You can then manage the inbox for quality        
certificates independent of the goods receipt.                          
The electronic inbox of certificates for the purchase order is only     
possible if this indicator is set.                                                                               
This means you have to create a certificate in QM (Transaction QC51),   
before you can update your PO with cert. enclosed.  
If you do not want the enhanced certificate processing you have change  
the indicator into inactive.    
Another problem known here is if you have activated the 05 Inspection type in the material master, that it is not activated in all plants relevant although QM in Procurement is set in all plants.                                        
I hope that this resolves the described issue.
Regards,
Isabelle

Similar Messages

  • How to Block GR after Rejection in Source Inspection - SAP QM

    Hi All,
    How to Block GR after Rejection in Source Inspection ? I have done a source inspection and rejected the inspection lot - but still I am able to do a GR for that PO.

    Dear,
    As per my view, It is not possible in partly quantity of purchase order.
    But when your Good receipt is done for your purchase order total quantity it set default delivery complete indicator in purchase order.
    But it is not match with your requirement.
    Please contact your ABAP team for your requirement.
    Regards,
    Mahesh Wagh

  • Stock Transfer of Blocked Stock Plant-to-Plant

    Hi..
    I have an issue regarding Stock Transfer of blocked stock from one Plant-to-Plant.
    I realize that blocked stock cannot be transfered directly.
    But the issue here is that if we cannot transfer the blocked stock directly, that means we have to do transfer posting from blocked stock to unrest use then stock transfer using mov type: 301. Then in the destination plant, we transfer again to blocked stock.
    If this is applied, then it will potentially raise other issues related to incorrect stock transfer by the other users once the material is released to unrest. use.
    So, in short, that's why we need to have direct stock transfer scenario for this issue.
    Kindly have your assistance
    Thanks in advance
    Albert

    Hello Albert,
    You are correct. We can not transfer blocked stock from one plant to another and you have to follow the same steps which you already mentioned.
    As per the business logc, We can not move "Blocked" (Business term: Rejected/scrapped/spoiled) material out of our business unit except Retrun to Vendor or Scrap it. so it is also not logical to move "THAT kind of Stock" to another plant.
    Hope this helps.
    Regards,
    Arif Mansuri
    Reward if answer is helpful.

  • Blocked stock and GR Block stock

    Can anyone please let me know the difference between Blocked stock and GR blocked stock.  How to post stock to these both stock type and how valuation matters to those.
    Also for transfer posting from Stock type Blocked Stock  to Quality Inspection Stock or Unrestricted-use Stock, whether accounting document will generate or not....
    Please clarify me on this.
    Thank you
    Shreek

    Can anyone please let me know the difference between Blocked stock and GR blocked stock. How to post stock to these both stock type and how valuation matters to those.
    GR Blocked stocks means if you have doubt about the stock you can post these stocks to GR Blocked stock with mvt type 103.In this case no accounting documents generated.Once you gets clarified the doubt about stock you can move the stock to your stock with mvt 105.Once you post the document with 105 you can get accounting documents will be generated.
    Also for transfer posting from Stock type Blocked Stock to Quality Inspection Stock or Unrestricted-use Stock, whether accounting document will generate or not...
    Blocked stock is you are blocked these stocks for other movements This stock you can transfer mvt 343 & 344 blocked to unrestricted or unrestricted to block.In this cas you are moving the stocks with in storage location in single plant so thesre is no accounting generated.only stock status changed..
    Hope this will clarifies,
    JS

  • MM Stock transfer from blocked stock between plants

    Dear friends ,
    Could I transfer material from Blocked stock between plants but in Blocked stock ?
    I not found this movement types in ECC.
    best regards,
    Ale

    It is not possible to move blocked stock between plants.
    You have to transfer the stock into unrestricted- then you can move it to the other plant- then again a transfer posting into blocked stock.

  • "Blocked stock" vs "GR Blocked stock".

    hi,
    please give some detailed info about "Blocked stock" vs "GR Blocked stock".
    rgrds
    Piyush

    hi,
    GR to the GR Blocked stock:
    1.     The material document is generated.
    2.     As the GR blocked stock is non-valuated stock, the no accounting document is generated.
    3.     The PO history gets updated and the open PO quantity is not reduced as a result.
    Can display GR blocked stock at:
    1.     Stock overview(At plant level)
    2.     PO history
    BLOCKED STOCK: Neither available for MRP nor for consumption...
    Hope it helps..
    Regards
    Priyanka.P

  • Block goods receipt if open inspection lot for source inspection (SAP QM)

    hello!
    i would like to block the goods receipt for a purchase order item, if there is an open inspection lot for source inspection. i know how to block, if it rejected, but not what to do in this case.
    thanks!
    matthias

    Hi matthias,
    can you tell me how to block GR if inspection is rejected in source inspection??? as you said u know. please let me know.
    Thanks!!
    vinay

  • Supplier relationship status for Source inspection

    Is it not possible to intiate supplier relationship status in quality info record for source inspected material???, please advice..
    I already assigned no GR inspection in Quality info..

    Hi,
    Please go through the below links.
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/e0c680d3-0706-2e10-4a9a-a5c67d6c4321?QuickLink=index&overridelayout=true
    http://help.sap.com/saphelp_46c/helpdata/en/2d/351149448c11d189420000e829fbbd/content.htm
    Regards
    Hari

  • Quality Mgt - can I create a new inspection type for source inspection

    I want to create a new inspection type for surce inspection and I will assign it to Miscellaneous insp lot origin.
    What is the application of vendor inspection lot origin ? Can be used for source inspection ?

    HI,
    For source inspection.
    If existing insp types are not going to solve your purpose , you can create insp type & assign it to insp lot origin 01.
    But before that , check whether you can use  the existing insp type 01 / 0130.
    You need to assign that inspection type in the Q-info record , in the source insp field of insp control.
    Also go through the help tips provide by SAP
    Inspection Type for Insp. Lot Origin (Source Inspection)
        Inspection type for the source inspection
    Use
        If you enter an inspection type for inspection lot origin 01 in this  field, you can create an inspection lot for the source inspection within the lead time before the (scheduled) delivery date.
    Dependencies
        The inspection type must be active in the inspection setup (Quality Management view) of the material master.
        If a status profile is stored in the quality info record for the supply  relationship, a goods receipt inspection takes place instead of a source  inspection.
    Regards
    K.M.Arun

  • Sample size calculation for Source Inspection

    Dear Gurus,
    I have an issue regaring sample size calculation for Source Inspection.
    I created a PO for 500 nos.
    The sampling procedure assigned in the Quality Plan is %age based (10%).
    When Inspection lot is created, system is caluating the Sample size as 500 and not 50.
    Moreover, when I go to Result Recording, the Inspection qty for the MIC is shown as 1. If the system is calculating sample size as 500, then the inspection qty for the MIC should also be 500. Moreover, the sample size should be 50 only.
    Please provide your inputs on this.
    Regards,
    Nitin

    Thanks Sujit!
    Your are correct. It works in the same way as u told.
    Assigned you the points for the answer.
    Closing the thread.
    Regards,
    Nitin

  • T code QA11, quantity can not be posted to blocked stock

    For Inspection lot with system status is   INSP RREC SPRQ, when user tries to perform QA 11 to post stock to blocked stock the system does not allow as "to blocked stock field" is greyed out and also can not chnage the storage location on that screen.
    I have checked the material already exists in the WH/storage location also inspection charachterstics are corrct not sure what else to check.please advise.

    Does not seem like authorisation restriction since user is able to process other QA11 for the same plant/WH and storage location. Does not seem like customisation either since all " Quantity to be posted "options and storage location are greyed out under inspection lot stock Tab
    After Accept atleast system should allow posting to "unrestricted stock " but thats not available either.
    For the same material/plant/WH, I am able to sucessfully post stock when system status is -REL  CALC SPRQ but in this case the status is -INSP RREC SPRQ, what does this signify.Please help

  • Transfer posting to block stock through quality notification

    Dear QM Experts,
    I am trying to post the material from unrestricted use to block stock through quality notification type Q2. Following are the details.
    1.     Material is batch managed
    2.     Storage location is managed by warehouse management and has storage bin.
    3.     Material has split valuation
    When I click on link transfer post unrestrictedblock system asks to put storage type and storage bin. Here I enter the appropriate details. When I press enter system throws error message as Enter valuation type as the material has split valuation active. Surprisingly I do not find the option to put this valuation type in Q2 notification screen.
    On the contrary when I try to do 344 movment manually through MB1B system gives pop up to select appropriate valuation type.
    Requirement is movement 344 should happen through quality notification considering above constraints. How the valuation type to be entered in Q2 notification?
    I would be grateful, if someone can throw some light on this.
    Thanking you,
    Anand Rao

    Which valuation category do you use in material master accounting view?
    In my experience..
    Normally a company use the batch management for split valuation and a valuation type should be input automatically by transaction in batch master.
    Therefore when you input a material, plant, batch in notification screen, a valuation type would be selected in background by system.
    Anyway try below..
    At transaction MSC2N you input a valuation type into batch master then try to transafer posting through notification.
    I'm not sure why your batch master does not have a valuation type.
    Regards
    Luke

  • Weird Problem in QM stock posting from Quality Stock to Unrestricted

    Hi all,
    Today I hit a weird problem in SAP and struck there for the past 5 hours. The problem is,
    I have a batch managed material, for which QM view is available. 01 inspection type is activated along with the "Post to Inspection Stock indicator" for that material in material master.
    Now I am creating a Purchase order and doing a goods receipt in MIGO. Then it creates a inspection lot of type 01
    for this material and puts the stock in to Quality stock (I checked in MMBE).
    Now as per standard SAP behaviour, if I want to move the stock from Quality to Unrestricted, I can only do it in QA11 trasaction through Inspection stock tab. If I try to do 321 (Quality to Unrestricted) movement in MIGO, the system will send an error message "Change the inspection stock of material XXXXXXX in QM only"
    But in my case, I am not getting this error message, the system is still allowing me to move the stock from Quality to Unrestricted thorugh MIGO using 321 movement. This is not standard and I don't want this.
    This behavior is seen in 04 and 08 inspection lots also (with post to insp stock indicator).
    The aftermath of this problem, if I do a MIGO transfer posting of say 100 PC through 321. The system is correspondingly updating the MMBE transaction by moving this 100 PC from Quality stock to Unrestricted. But if I go to QA11 and check, the QM still shows that 100 PC to be in Quality stock itself, thus creating a mis-match between actual stock situation and the stock situation in QM.
    I already checked and most of the SPRO nodes and I am left clueless. One more thing, Usage Decision is not yet done for the inspection lot and it is just REL status. Also thee are no developments or enhancements in QM module in my project. Only 1 enhancement relating to custom sample label and rest of all the functionality is standard.
    Sorry for the long post. How to correct this? Please help me!
    Thanks in advance,
    Vinodh

    I don't know why this happenned.  Look at the QM view of the material master and see if the "inspection setup" flag on the QM view is clicked on.  That is usually greyed out and is set by having an inspection type activated.  You can't manually set that once an inspection type is added.  But that is the indicator I believe is used to determine if regular stock movements are allowed for QM stocks.
    I would try to first clear all your inspection lots first.
    Then delete all the inspection types from the material.  And I mean actually go in and delete them. 
    Then use QA08 to reactivate the ones you need.
    Then see if this solves the problem.
    FF

  • Reversing stock directly to blocked stock from prodcution order

    Hi Guys,
    Scenario is like this
    Good issue(say Material X -10 qty) is made to a prodcution order
    Now the requirement is reverse the stock of material X from the production order directly to Blocked stock & not Unrestricted use
    By 262 it will go only to unrestricted & not blocked stock
    Please explain me in detail how to configure this
    Thanks in advance,
    SVP

    Hi,
    "Reverse" means that you do the opposite of your first action. You consumed the raw materials by 261 form unrestected, when you reverse it, the components will get back to unrestricted.
    There's no mvt designed for the purpose you want (in standard SAP) - as per my best knowledge.
    So, you have to reverse the consumption and then block the stock.
    Regards,
    Csaba
    Edited by: Csaba Szommer on Oct 15, 2008 8:13 AM

  • Withdraw stock from vendor blocked stock

    Hi
    There are stocks at vendor in Restricted status.
    I wanted to withdraw this stock for scrapping.  But movment type 555 do not have option to withdraw from vendor restricted stock.
    Can you please help me to remove the stock ? to unristricted/scrapping.
    Warm Regards
    Chetan.

    hi chetan,
    As per u narrated the stock is at vendor but in restricted stock. it means under vendor liabilities.. but now u want to scrapp it correct??
    as per my knolwedge the restricted stock should have liabilities at your side then only u can scrapp it. for that u have to move the vendor stock to unres. one and then receive it to scrap.
    please find your self and try.
    regards,
    ninad kshirsagar

Maybe you are looking for