Stock Type X Quality Inspection in Production Orders

Hello,
I have the material 123EDFXXX that the Production order has set the Stock Type =X (Quality Inspection)...
We don´t know how was that set!! since that material has not active the QM Views in the material master.
There is another master data (prod version, route) or something else that is coping that value??

Hi Marco,
1.Pl check if QM was active before the creation of order.If so you need to delete all Material and accounting documents
2. Check in the work scheduling view in material master if the inspection stock is active box is active.then this could be the reason.
Regards
George

Similar Messages

  • Default stock type as quality inspection when i create Stock transport orde

    I want default stock type as quality inspection when i create Stock transport order with T-code Me21n.All the settings in he material master are maintained for inspection type 08. (donot wnat to change the  stock type manually,it should come as default)Please provide solution.

    Hi
    This is not QM setting this is Achieved by MM setting in SPRO.
    SPRO>MM>purchasing>PO>define screen layout at document level>select UBF(STO) or ME21n>overview>GR/IR control>
    select Qulaity inspection--> decheck the Opt Entry click on Display.
    This will solve your problem
    Regards
    Sujit

  • Problem in BAPI for stock posting from quality inspection  to unrestricted usage

    Hi all,
    I am using BAPI_GOODSMVT_CREATE for  stock posting from quality inspection  to unrestricted usage Stock against quality inspection lot(not by MB1B) using mvt type 321.The material doc gets created by the BAPI,but actual stock posting is not taking place ie.the stock doesn’t get reflected in QA33/32 and QA11 also .Can any one suggest what must be wrong?The inputs given are as follows:
    GOODSMVT_HEADER:
    PSTNG_DATE =30/07/2014, DOC_DATE = 30/07/2014, REF_DOC_NO = INSP LOT NO.
    GOODSMVT_CODE:
    GM_CODE:  ‘04’ .
    GOODSMVT_ITEM:
    MATERIAL = MATERIAL NO
    PLANT = PLANTCODE
    STGE_LOC = ‘WIP’
    BATCH = BATCHNO
    MOVE_TYPE   = ‘321’
    ENTRY_QNT = 100
    ENTRY_UOM =  ‘EA’
    ORDERID =  Prd ord no.
    After executing this I used BAPI_TRANSACTION_COMMIT also. I am able to see the posted qty in MMBE,but it is not reflecting in QA11/33/32.
    Kindly help me.

    Hi Naveen,
    Thanks for the reply. Even after using FM QAVE_PROCESS_AUTO_UD,when i execute
    BAPI_GOODSMVT_CREATE, the same thing is happening.I am unable to see the stock deducted in QA33.
    Is there any input in the goods mvt bapi where we can provide inspection lot no since i believe that the goods mvt has to get connected with the inspection lot.

  • Assign Delivery Type to Quality Inspection

    Dear All,
    As in my Export cycle , I create 2 deliveries but in first delivery ,it never shows an incompletion log regarding the Quality Inspection of that material.But in last Delivery,it asks for Quality Inspection.
    So where we assign the Delivery Type for Quality inspection.
    Kindly Suggest.
    Best Regards,
    Ankur

    hi
    follow the path
    SPRO-----Quality Management--Quality Inspection--Inspection Lot Creation--Inspection at Shipping-Assign Inspection Lot Origin to Delivery Type
    HERE YOU have to assign the inspection type to delivery type

  • Backflush Semifinished product and stock post to quality inspection stock

    Dear Experts,
    Please advise is it possible for the below in SAP. How to do?
    When backflush "Semifinished product", system automatically post to quality inspection stock. Then it is skip for 9 lots. The 11th lot again post to quality inspection stock.
    1st backflush posting -> post to quality inspection stock
    2nd until 10th backflush posting -> post to unrestricted stock (skip)
    11th backflush posting -> post to quality inspection stock
    Thanks.
    Regards,
    Wong

    Dear Experts,
    Let me further explain what I want.
    Production people produce semifinished product, but quality inspection people not inspect all the product. For example they will inspect 1st and 11th batch of product only.
    So I propose when backflush the semifinished product, system post the stock to quality inspection stock. Then production people know this batch of product need to be inspected and pass to quality inspection people. Once quality inspection people complete the inspection, they will release the material (UD) to unrestricted stock.
    I have no idea on how to configure and maybe it is not possible in SAP. Please advise.
    Question: Is it we should manually create inspection lot for each transaction (eg. backflush or material movement)?
    Thanks in advance.
    Regards,
    Wong

  • PTP - Change to stock type field status configuration in Purchase Order

    When creating or changing a PO for direct material - or even during goods receipt, the stock type field which by default is "X - Quality Inspection" can be changed to "Unrestricted Use" by the purchasing personnel.  This is not in line with QA requirements where the change from QI to Unrestricted use can only be done by QA personnel.
    Need to configure the system not to allow purchasing personnel to change the status.
    Please tell me  where i need to configure the above requirement.
    Regards
    Sreekanth

    HI,
    You will need to change screen layout at document level in ME21N and ME22N. Follow below steps
    SPRO -> Mateial Management -> Purchasing -> Purchase Order -> Define Screen Layout at Document levle -> ME21N -> Look for Quality Inspection (I believe this is the field, I did not test it) and make it Display only. By default it comes as Optional entry.
    Regards,

  • Moving Stock out of Quality Inspection

    Hi Guys,
    I have a slight issue that I need help with.
    First, let me explain the situation.
    I have a client that wants to use a 3rd party for their Inventory postings. They DO NOT want SAP Quality to move stock. Currently they have an Interface in place that sends the Stock postings via EDI. They never had Quality Management in place until now.
    So, now when they do a MIGO Goods Receipt on a Purchase Order it generates an 01 type inspection lot. I have turned off the movement on the Usage Decision so that SAP can't move the stock out of Quality when they close the lot. They want the Interface to move the stock from Quality to Unrestricted. Currently it errors out and says "can't move stock need to use QM only"....
    My question is......Besides updating the Inspection Lot via QA12. Is there ANY configuration settings I can work with to fix this? or Allow the "321" movement?
    Thanks so much

    No.  Stock must be moved via the inspection lot.  For a third party interface like that you'll have probably look at building something using the FM used by the external interfaces to SAP QM such as LIMS.
    This PDF file might help you.
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/1ebb1361-0b01-0010-56aa-c780c5446963?quicklink=index&overridelayout=true
    FF

  • Quality Records and Production Orders

    Is there a way that if a Production Order contains a quantity of 4 and I have 1 inspection lot number with using inspection type 3 that I can still record the values for quality as a per unit basis without creating a serial number?
    Please let me know.
    Thanks.
    Bobbie

    Also, could I still be able to trace as a per unit if a serial number is not generated?

  • Open TRs show in LL01 for Mvmt type 261, wrong SL on production order

    Hi all,
    I have the following issue
    We have roughly 2000 open transfer requirements related to movement type 261 GI to order. They all show up as critical processes in LL01 (Warehouse Activity Monitor)
    I have looked at the production orders being created and some of the components in those production orders show the wrong storage locations, which I am almost sure is the reason for the stranded TRs
    But I cannot seem to find out where that list of wrong storage locations is getting populated from!! I have checked the material master and the storage types where these materials are stored in WM. In all these places the storage location is correct. Yet in the production orders some components show the right SL and some don't..
    Does anyone know what could be the reason?

    Hi,
    What i have understood is Open requirement has created for wrong storage location which u donot trace.
    U can see the that incorrect storage location at Component Overview of Production order.
    The possible area from which the issue storage location can flow.
    1.Issue storage location defined for Bom components at Header Material Bom.
    2. if header material has production version , check wirh issue storage location at Pv.
    3. Default supply area defined at workcenter related that component.
    4.stock determination Group  at MRP view.
    i hope this will help u to fix your problem
    Pradeep

  • Quality Inspection before Production

    Hi All,
    We are using Production resource tools(PRT) in Production Order. We want to do the quality inspection of the PRT before one day of Production.
    How can we map the following scenario so that Quality check can be done for PRT before Production??
    Thanks,
    Sanjay

    Dear
    1) Create Equipment under the category Test Equipment (Q)
    2) Go to inspection plan and assign the PRT in the opertion overview. When you click on PRT normaly it will ask for material, you can choose equipment and then add the Equipment there. You can assign multiple PRTs
    3) In inspection characteristic - make sure that Test Equip is ticked in the control indicator of the mic
    4) In inspection charactertistic overview for each mic you can select and the PRTs maintained in the operation view is visible here and you select the one which is require
    Refer : Re:PRT Inspection
    Regards
    JH

  • Non stock material and quality inspection

    Hi All,
    We are using a material short text for a material procurement. System allows me to post the goods receipt with mvt type 101 into quality inspection stock.
    However once posted to QI stock, we can not enter 321 movement with reference to GR document.
    But i can enter rejection for full or partial quantity using movement type 122,with reference to GR document.
    Can any one suggest the method to transfer the stock from QI stock to consumption. SAP doesnot allow consumption from QI stock. How to handle the process.
    Prashant

    Hi,
    When you do GR at that time only system books the consumption of material quantity and value immediately. Since there is not any material master (Material text purchase)
    The quality lot generated is for keeping the record of the materials Usage Decision and Result Recording and to generate the COA. It is not related with Stock Posting since there is not any stock after GR.

  • Inspection for production order

    hi all,
        While I tried to generate inspction lot for production order automatically, i get an error message : inspction lot create fail. I've done these steps, is there any mistake here :
    1. in material master, i set inpection type 03 and choose prefered inspect type and active options.
    2. I've create an inspction plan with usage '1'(Produc) and status '4'(Release) and inspect operations with control key 'QM01', also aign MICs into them.
    3. when i create product order with TCode 'CO01' and release this order, it can't create any inspection lot automatically, when i try to do this manually with menu, i get that error message.
    Did i missing any setting?
    thank u very much.

    Dear,
    In Material master, QM view in the insp type 03 details
    check box-insp with material specification
    Check box-insp with task list
    In the above check box, which one ticked?
    If both are ticked then you need to maintian material specification in QS61, or remove this tick from check box-insp with material specification in material master
    So for inspection type 03 use routing with usage as 1 and status as 4 and control key as PP04 to specify the inspection characteristics.
    when u cofirm that perticular operation it will ask to record the results. Inspection lot get genarated during order release this we can see in the order header data assignment tab. PP04 assignement says this operation is relevent for inprocess inspection and we need to assign MIC's for this which are relevent created in QS21 for this also sampling procedure created in QDV1
    Also refer this link,
    QM - 03 TYPE INSPECTION
    Hope it will help you.
    Regards,
    R.Brahmankar

  • Defaulting Valuation type of header material in production order

    Hi PP users,
    I have a scenario where a Semi-finished material SF is subject to split valuation as per valuation type = In-House & Export.
    However, the production of SF is always done in MTS environment and client wants that each production order for this SF should be posted for GR (through order confirmation) with valuation type = In-House. When they will have the requirements for SF to be exported, then they will be doing MB1B/309 for SF from valuation type = In-House to Export and then sale from valuation type = Export.
    Now I have seen that for split valuated SF or FG, when you create production order then in the GR tab of order, a field is autoamtically made available for Valuation type. This field is not a mandatory one and hence can be left blank also.
    At the time of order confirmation for SF, the valuation type field is open for input under 'Goods Movements' details. So, even though it is intended to do GR for valuation type = In-House, user can by mistake put valuation type = Export.
    Is there any way in SAP whereby the valuation type (whenever applicable as per header material) field in production order is made mandatory or even defaulted with desired valaution type (in our case, valuation type = In-House)?
    Once either of the two options will become possible, I will be using transaction variant for order confirmation transaction to make the field Valuation type for Output only (not ready for input).
    Thanks in advance,
    PP_HKV...

    Hi
    The field - Valuation type can be made mandatory in T-code MIGO. There is a setting in customizing as Enjoy Setting in Material Management. Using this you can make the field mandatory in MIGO (GR).
    Similarly bu using screen variant you can also make the field mandatory in Order confirmation - Goods movement. (CO11N).
    For making the valuation type as default, there might be a solution in BAdI. Please check with your ABAPer.
    Regards
    Amit parkhi

  • Transaction code to know stock lying in quality inspection(for UD)

    Hi,
    Pl let me know transaction code to know stock agaisnt materials lying under quality inspection ( for UD ) for more than one materials or plant wise or pgrp wise or sloc wise ....
    Thanks
    Arul Murugan

    Hi,
    In QA33 Transcation code ,Enter the lot creation ,In list settings select ,Only lots without usage decision and execute.
    In the layout select Quantity to be posted(Quality stock).This will give the list of Inspection lots against the material to be posted to Unrestricted or blocked stock.
    Manoj.N

  • Automatic Quality Inspection in Purchase Order

    Hi all,
    If i create a purchase order for a material with QM avtive, automatically the system put the value of Quality Inspection into field INSMK. Is it possible to avoid this, even if the material is managed by QM?
    Can you help me, please?
    Thanks and regards
    Luca

    Hi,
    Check on it.
    Re: how we may by pass quality inspection during PO creation
    pherasath

Maybe you are looking for

  • Getting ORA-00904 whle running a procedure!

    hi , the following procedure is meant for getting the details which has name of the user tables alone along with number of columns,but am getting -ERROR IN BLOCK:::ORA-00904: "tablename": invalid identifier. DECLARE v_cols NUMBER:=0; cursor c is SELE

  • [SOLVED] screen brightness too low when switching tty

    I have autologin enabled in LightDM, so when I boot I am taken to my MATE desktop automatically. This happens in the default tty (tty1). Sometimes I want to switch to a different virtual terminal (e.g., by pressing Control+Alt+F2) without ending my s

  • Suddenly my MBP can't find my TC-airport anymore

    Hello I recently got a new MBP (13"). I immediately upgraded to SL with migrating files from my recent MBP on the Time-Machine-Backup on my Time Capsule. Everything seemed to be fine. I later upgraded to 10.6.1 . That also didn't seem to cause troubl

  • HELP in Select box

    Hi all, I have 3 select boxes in a single JSP page.Like First Select box <select name="animal> <option>Cat</option>      <option>Dog</option>      <option>Donkey</option>      <option>Monkey</option>      </select> Second select box      <select name

  • How to manually insert a jumper multisim

    hi i want to transfer my circuit to ultiboard but i need a jumper how do i add it on multisim my version does not support automatic insertion.