Stop and start at same point?

I want to be able to stop and start at one point in a song.
As it is, when I press "play" from, for example, bar 3, then I hit stop at bar 6. I want to start again at bar 3, NOT bar 6. But for some reason Logic continues - like "scrolling" in ProTools.
I do not want to use my mouse to click back bar 3.
How do I stop / start at the same measure ?

glankrudolph wrote:
Here is what I need:
Say I'm starting at measure 20. I place the playhead at measure 20. I press play and it plays for a few measures. I press stop, maybe at measure 24. Now, when I press play again, I want it to start at measure 20, like in ProTools.
hi glank .. you need to get into the use of Markers. This will easily solve your issue:
1 - Look up the Key Command for Create Marker at Playhead ( ie without Rounding)
2 - Look up KC for "Go to Next Marker" & "Go to Previous Marker".
3 - Place Playhead at measure 20. Press KC for "Create Marker without Rounding"
4 - Play for a few measures and stop whenever you want to.
5 - Now press the KC for "Go to previous marker" - with one stroke you are back at measure 20
6 - Press Play
If this is not quick and easy enough for you, I will eat my hat
best
m s

Similar Messages

  • Task created to stop and start Health service not working.

    We have multiple servers being grayed out so we created a task to stop and start the health service on SCOM 2007 R2. We have created two tasks one to stop and another task to start. The STOP task works but the START tasks keeps running but there is no result
    as well as when i check in Services.msc it is still stopped. Below are the screen shots .
    Task created to STOP the health service which is running.
    Screen shot of service start task creation which is NOT working
    The same was created for another service windows audio. Which worked for both stop and stop (Created separate tasks).
    We also tried the recycle health service and chche which is also failing.
    Can any one please help. The issue is on both SCOM 2007R2 and 2012 R2 both. Is there any other way to touch the health service.
    We are facing the issue only with Healthservice.

    Hi All,
    Thank you for all your answers.
    @ dktoa -
    You are right we have to concentrate on the servers to determine why do they go grey (all in one site). But before we do that i felt i find a temporary solution. Then go deep investigation to solve the issue.
    @Yan LI: As per the likn provided above you. I overrided the servers but still the health services were not starting or restarting. When i created a custom group and added the servers to that  group in that site and then  enabled the override on Restart
    Health Service for a specific group and pointed towards that group then it worked.
    Thanks All.

  • HT202159 How to resume interrupted downloads when it stops and starts during the download process?

    I have a 2011 25inch iMac desktop and it when I download a game app from the App store, it keeps on stoping and starting at certian points (these are random and do not stop in the same spot if I restart the download) Ive only gotten as far as 6.22GB out of 8:55GB before the download progress stops and goes back to the begining all by itself. I have plenty of space on my hard drive to install it so why is it constently doing this. Its taken me a week and a half to get to about 6.22GB and its still not letting me finished the instalation. Also why is the Calulating times keeps going up and down some times it says like 1 hour and 55 minutes when its progressing but then when it stops it goes all the way up to like 15 days, 14 hours and 60 minutes until it starts up again and then it goes back down to 1 hour and 54 minutes when it starts up the instalation progress again. The Game app is Trainz Railroad Simulator 2.

    Hi Mattew ..
    Disable anti virus softwrare if installed
    Make sure the firewall is turned off in System Preferences > Security & Privacy > Firewall
    Make sure Gatekeeper is enabled
    Open System Preferences > Security & Privacy then select the General tab.
    Make sure either Mac App Store or Mac App Store and identified developers is selected. If that area is grayed out, click the padlock icon to proceed.
    OS X: About Gatekeeper
    If nothing above helped, try contacting the Trainz Railroad Sim 2 app developer >  Trainz Portal - Powered by Kayako Fusion Help Desk Software
    If you do not hear back within three business days, contact Apple > Apple - Mac App Store - Contact Support

  • WHENEVER i SURF THE WEB AND PLAY ITUNES MUSIC, THE ITUNES MUSIC STICKS AND SKIPS AND STOPS AND STARTS. i HAVE BRAODBAND COnNECTION AND AN ADEQUATE MODEM

    WHENEVER i SURF THE WEB AND PLAY ITUNES MUSIC, THE ITUNES MUSIC STICKS AND SKIPS AND STOPS AND STARTS. i HAVE BRAODBAND COnNECTION AND AN ADEQUATE MODEM

    I am experiencing the same problem, not being able to access internet at the same time as streaming iTunes music through an Airport Express.
    Our configuration consists ot; an iMac G5 and an AirPort Express connected to a cable modem.
    This problem first occurred using iTunes 7.0, now updated to iTunes 7.0.1, along with OS X 10.4.8
    I have followed the Apple troubleshooting guide - without success to this point. The internet can be accessed (although slower than usual). However when the AX is set, using the AirPort Admin Utility to provide an AX provided IP address to the computer, the internet disappears, but iTunes can play over the network via the AX station.
    I am suspecting a damaged preference file, or something of that nature, but am not sure what file(s) to be searching for.
    Any help here would be appreciated.
    thanx

  • SSRS Report queries begin running slowly, have to stop and start report server to restore performance

    We have had a production issue crop up twice now where reports begin running slowly seemingly at random.  
    When this happens we can see from running SQL Profiler that the report queries are taking an extremely long time to execute.  The same queries when run directly in management studio run quickly.  
    Initially I suspected parameter sniffing, and tried using OPTION (RECOMPILE) in the reports, as well as clearing out the particular query from the plan cache and running the SQL in SSMS to try and get a better plan etc but no amount of jiggery pokery by
    me could get the queries to run any faster.
    The really weird thing - is that stopping and starting the report server via the reporting services configuration manager instantly cures the problem.  
    I'd really love to know - why this might be?  Is it something to do with the report server closing and re-opening its connections to the database? That's the only sort of thing I can think of...any ideas? Anyone? Any suggestions would be much appreciated.
    LucasF

    Hi LucasF,
    In your scenario, usually we can monitor the execution log in Report Database. If you run below query, you can get the results how long the report takes to render (TimeRendering), how long to process the report(TimeProcessing) and how long to retrieve data
    from Database(TimeData). You can check the starttime and endtime to know the total time for executing a report.
    SELECT TOP1000 *FROM[ReportServer].[dbo].[ExecutionLog2]
    More details information, please reference to similar thread below:
    Steps for troubleshooting a slow SSRS 2014 server
    Troubleshooting Reports: Report Performance
    In SQL Server Reporting Services, a job will be created by SQL Server Agent if any of the following processes is underway:
    query execution on a remote or local database server
    report processing
    report rendering
    To cancel a job that is running on the report server, we can cancel the job directly or reduce the report execution time-out value in the SQL Server Management Studio and then will stop query execution. Please refer to the steps below:
    Open SQL Server Management Studio, and connect to "Reporting Services".
    Under the Report Server node, right-click on the "Jobs" folder and select "Refresh". Then, right-click on "Jobs" again and click "Cancel All Jobs".
    Right-click on the Report Server node and open the "Server Properties" dialog.
    Click the "Execution" option, and set the "Limit report execution to the following number of seconds:" to a much smaller number. After this issue is resolved, this configuration should revert to the previous state.  
    Reference:
    Managing a Running Process
    Setting Time-out Values for Report and Shared Dataset Processing
    In addition, we can also use the KILL Transact-SQL statement to terminate a normal connection by terminating the transactions that are associated with the specified session ID. For the details information, you can refer to:
    KILL (Transact-SQL)
    If you still have any problem, please feel free to ask.
    Regards,
    Vicky Liu
    Vicky Liu
    TechNet Community Support

  • How to stop and start process SAPOSCOL

    Hi, i have a problem with write access for saposcol program. I see that the file saposcol is read the file but its unable to wirte the same.
    Collector           : running
    Start time coll.    : Mon May 21 17:49:49 2007
    Current Time        : Mon Jun 11 13:27:51 2007
    Last write access   : Tue May 29 06:23:46 2007
    Last Read  Access   : Mon Jun 11 13:26:24 2007
    When i try to stop the saposcol i get the following error:
    igzadm> saposcol -k
    Setting Stop Flag :
    13:24:44 11.06.2007   LOG: ==== Stop Flag was set by saposcol (kill_collector()).
    13:24:44 11.06.2007   LOG: ====  The collection process will stop as soon as possible
    can't kill process 409656.
    kill: No such process
    ERROR:No reaction from collecting process 409656.
          Please kill collecting process.exes.
    Am doing this command through SID<ADM> from change directory /run.
    Please help me how to check the permission of the SIDADM to stop the services.
    I also try the same from root user but now use..
    Please guide me how to stop and start the SAPOSCOL in AIX 5.3.
    Advance Thanks.
    Suri Tyson

    Hi, i have the following permission for saposcol
    imserv:/ # ps -ef | grep saposcol | more
        root  118842  528422   0 14:02:17  pts/2  0:00 grep saposcol
    I have changed the ownership as you mentioned....
    imserv:/usr/sap/IGZ/SYS/exe/run # ./saproot.sh igz
    Preparing /usr/sap/IGZ/SYS/exe/run/brbackup ...
    Preparing /usr/sap/IGZ/SYS/exe/run/brarchive ...
    Preparing /usr/sap/IGZ/SYS/exe/run/brconnect ...
    Preparing /usr/sap/IGZ/SYS/exe/run/brtools ...
    Preparing saposcol ...
    Preparing icmbnd ...
    done
    However, i still get the error as:
    igzadm> saposcol -k
    Setting Stop Flag :
    14:12:13 11.06.2007   LOG: ==== Stop Flag was set by saposcol (kill_collector()).
    14:12:13 11.06.2007   LOG: ====  The collection process will stop as soon as possible
    can't kill process 409656.
    kill: No such process
    ERROR:No reaction from collecting process 409656.
          Please kill collecting process.
    Now the permission are set in my system as:
    igzadm> ps -ef |grep saposcol|more
      igzadm  729196  983058   0 14:13:25  pts/2  0:00 grep saposcol

  • Stops and starts in video streaming from iphone to tv using apple tv and airplay.Both devices have latest software and are capable.

    When try to stream content (specifically, videos from Acorn.com) to my TV through my apple TV from my iphone 5,The video  freezes, stops and starts continually, even though it is playing smoothly on the screen of my iphone.  both iphone, Apple TV  are capable models and have latest software updates.
    What's wrong here?

    Not necessarily, but right now you don't have a stable network and there are a lot of factors that can compromise that. I didn't say ethernet was the only option, again you can get a report of your network to see the status.  Would have to change things in order to strengthen the wifi signal (i.e. router location, channel,placement of ATV etc). I am running on wireless without issue, same as most users, and if you took it to a controlled environment (like Apple) you would see similar results.

  • Stop and start the system via the SAP GUI

    ........ although I don't know the answer!
    We have SAP running on an iSeries/DB2 format.
    And we of course have stopped and started our SAP systems many times before via an iSeries screen.
    One thing we have never had to do, is stop and start the system via the SAP GUI.
    Is this possible? If so, how is it done?
    Surprisingly difficult to find a solution online.
    Edited by: Juan Reyes on Aug 10, 2010 11:10 AM

    Paui,
    You can also do a soft shutdown, which waits till the active users/sessions are logged out (Draing out the sesstions) and no more new users are allowed to login during that time.
    Goto SM51, select the instace/server you want to stop then menu --> Goto --> Server Name --> Administration --> Shut Down Server (soft).
    Here you can also select a hard shutdown if the situation demands by following the same menu path.
    Even though your question is answered but I still wanted to update you the options to select.
    -Mahesh

  • Stop and Start Essbase 11.1.2.2 services

    Hi All
    How to stop and start essbase 1.1.2.2 services? Do I just stop and start OPMN service? Or got to start menu and Oracle EPM System and Essbase to stop and start? Will both work?
    Thanks

    Yes you can just stop and start the OPMN service, the start menu option will do pretty much the same thing, for more information have a read of http://docs.oracle.com/cd/E17236_01/epm.1112/epm_install_1112200/ch12s02s08.html
    Cheers
    John
    http://john-goodwin.blogspot.com/

  • The sequence to stop and start xMII?

    Hi, good afternoon:
    Could anybody provide the sequence to stop and start xMII?
    Is it different from xMii11.* to xMii12.*?
    Thanks!

    Yes, the steps are same as what I suggested before.
    You can find plenty of material on SDN like blogs, articles, best practices and so on...
    The best place would be to start with is [MII WIKI|https://wiki.sdn.sap.com/wiki/pages/viewpage.action?pageId=15601]
    Below are few other very useful links,
    [Blogs|Weblogs related to SAP xMII; ( you can also find many blogs under category Manufacturing, xapps, mii etc.. on SDN)
    [Best Practices Guide|MII 12.X Best Practice Guide is now available;
    And also can find loads of threads on MII 12.x, 11.x installations/configurations/troubleshooting simply use large search date range.
    Hope this helps!!
    Regards,
    Adarsh

  • How to stop and start IGS(internet graphic server)

    Hi Techies
    How to stop and start IGS(internet graphic server) in Solaries
    IGS is 7.0 1patch
    Is this the command to stop and start IGS
    stopigs and startigs
    If this correct will there be any issues if i stop the IGS from the above command
    Thank You
    Haroon

    Hoi Haroon
    On base 6.40 there were stopigs/startigs scripts, yes. When we upgraded our systems to 7.0 I encountered the same problem, the igs could be stopped, but not started anymore (externally). Can you check, if the startigs/stopigs-scripts are 7.0 or 6.40.
    I then opened an oss and got as answer:
    "To start and to stop the igs there's only the offical way by stopping and starting the sap system".
    However I found a solution to start and stop:
    start:
    nohup /sapmnt/<SID>/exe/igswd_mt -mode=profile pf=/usr/sap/<SID>/SYS/profile/<Instaneprofile> &
    e.g.:
    nohup /sapmnt/P72/exe/igswd_mt -mode=profile pf=/usr/sap/P72/SYS/profile/P72_DVEBMGS01_migzmc10 &
    stop:
    --> stopigs, therefore the 6.40-stopigs script has to remain in the exe directory.
    Hope this helps.
    Regards Patrick

  • Sometimes when listening to music or a podcast, it will stop and start in rapid fire.  I have a 4th gen iPod Touch.

    Sometimes when listening to music or a podcast, it will stop and start in rapid fire.  I have a 4th gen iPod Touch.  A Genius suggested something went wrong during the transfer from my MBP to my iPod, but I tried resyncing it, and it seems to happen haphazardly.  Even if a podcast plays oddly one time, it might play perfect the next - so it can't have been the sync that went bad. 

    - First try a reset. Nothing will be lost.
    Reset iPod touch:  Press and hold the On/Off Sleep/Wake button and the Home
    button at the same time for at least ten seconds, until the Apple logo appears.
    - Next restore from backup
    - The restore to factory defaults/new iPod

  • Problem stop and start the ias 6.0

    Hi all,
    i have a problem when i stop and start the ias 6.0 sp2. The problem
    apparent is that when i stop the ias the IAS web connector plugin stop,
    then i start the ias and when i try to connect to a servlet in my ias
    the page i find in my brwser tell me "The documento contained no
    data.Try later again ..". Afte this i see that the IAS web plugin begin
    to start and then the same connect to the servlet works.
    Somebody can help me.
    Thanks in advance.
    Ignacio Ramos Garcia
    Division TSO
    Area de Telecomunicaciones
    Tecsidel
    C/ Enrique Jardiel Poncela, 6
    28016 Madrid
    Tel: (+34) 91 353 08 19
    Fax: (+34) 91 353 08 81
    <mailto:[email protected]>
    www.tecsidel.es

    Hi,
    This really looks like a problem, kindly let me know the following...
    - The O/S version & the web server with the service pack
    - What method are you using to start & stop the application & web
    server ?
    - What application are you invoking to see this error ?
    Regards
    Raj
    Ignacio Ramos Garcia wrote:
    Hi all,
    i have a problem when i stop and start the ias 6.0 sp2. The problem
    apparent is that when i stop the ias the IAS web connector plugin stop,
    then i start the ias and when i try to connect to a servlet in my ias
    the page i find in my brwser tell me "The documento contained no
    data.Try later again ..". Afte this i see that the IAS web plugin begin
    to start and then the same connect to the servlet works.
    Somebody can help me.
    Thanks in advance.
    Ignacio Ramos Garcia
    Division TSO
    Area de Telecomunicaciones
    Tecsidel
    C/ Enrique Jardiel Poncela, 6
    28016 Madrid
    Tel: (+34) 91 353 08 19
    Fax: (+34) 91 353 08 81
    <mailto:[email protected]>
    www.tecsidel.es

  • HT6058 I have updated my I pad dut I'm still having problems my iPad seems to freeze and when I go to put in my pin it take a few seconds before the numbers go in and my games stop and start and stop and start for a bit before they run properly

    I have updated my I pad dut I'm still having problems my iPad seems to freeze and when I go to put in my pin it take a few seconds before the numbers go in and my games stop and start and stop and start for a bit before they run properly

    Try this  - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) No data/files will be erased.
     Cheers, Tom

  • Flash player stops and starts intermittently

    Does anyone know why videos stop and start intermittently. It becomes frustrating to watch and I eventually give up.

    op sys win 7 adobe flash player 10
    I have the same problem.  it seems related to bandwidth.
    i am limited in my data plan to 256 kb/sec
    i did not have this problem a year ago.  but had it when i used win xp as well.  Today noticed a site where i could choose low speed, medium speed or high speed bandwith. i chose the low speed 265 kb and the video played flawlessly without stopping and starting
    I claim no expertise and eagerly await some informed advice on whether it is possible change a setting within flash player to accomadate us low bandwith users.

Maybe you are looking for

  • NTLM is not working with EP 6 SP 9 on Windows 2003 with IIS 6.

    I installed EP 6 SP 9 on windiows 2003 server with IIS version 6. Configures IisProxy.xml for redirection for filter irj. When  I make a call to default website, it in turn calls server with irj filter. Portal page comes up and requesting me to enter

  • Is it possible to transfer files (music) from an ipod touch to itunes

    Is it possible to transfer files (music) from an ipod touch to itunes

  • 306 error

    For some unknow reason, iTunes would not open.  Many attempts to "fix" failed and the last resolution was to create a new user ID for my desktop computer. iTunes and assoctiated programs were deleted in the proper order I turned off my firewall prote

  • Why do the connected devices to the router have the smae IPV6 address?

    Hi, Now I meet the issue The operation steps on router (WRVS4400N): 1.Set the IP mode as Dual-stack IP and then save 2.Disable the IPV4 DHCP server 3.Use other deivces to connect the router. The connected devices have the same IP address(2005:123:456

  • Call a Program

    Hi everyone, I created batch input program for sap banking that create massive loans and edit this loans for the loan type 33D. now I want to Call again the start of selection part of my program. how can I do that? Thanks in advanced, Fidel Peralta