Stop and Start Communication Channels

Hi All,
I am finding some peculiar entries in my application log which has made my scenario go awry.
I have an AS2 to Proxy scenario. I am receiving the AS2 message successfully and i have to send a synchronous signed MDN back to the sender. I have done the necessary configurations for this and all certificates are loaded and verified.
The strange part is, once i receive the AS2 message and convert it to XML using content conversion, the communication channel is stopped and again restarted. This messages i could find in application log Log entries. This makes the MDN Asynchronous as the existing HTTPS connection with AS2 sender is lost and so the MDN is not delivered as ASYNC MDN method is not set up.
I need to know what are the system processes that can start and stop a communication channel. I am sure i have not set up any availability time planning for these comm channels and also, they are scheduled manually!
Thanks,
Rashmi.

Hi Debashish,
I am using Advantco AS2 Adapter, and they say it is one of the system processes and not anything with their AS2 Adapter.
Thats why this question. Are there any system processes that can start/stop a communication channel? Atleast I have not come across anything like that.
Thanks for your reply,
Rashmi.

Similar Messages

  • Communication Channel Stop and Start

    Hello everyone,
    We are using XI along with MQ for queing messages to our 3rd party logistics. Due to some issues happened in the past, it is decided to stop and restart the MQ channels every weekend. Now the problem is, when the MQ is down, some of the XI communication channels will go down,  and will not start automatically, when the MQ bounces back. Now this had created a manual activity every weekend to stop and start all communication channels.
    Question is, is there any way we can schedule it as a job to stop and start the channels, at a specific time ?

    Hi!
    It is possible in scheduling the messages in XI...
    1.  But before doing this make sure that at what time you want to be schedule ?
    2.  Is that time will be uniform for every week or else is it may varies ?
    3.  If Uniform please make schedule or else if it is varying note the difference between those timings I mean
         If your Messages are flowing for every Tuesday and also every Thursday...., etc..
    4.  You can schedule what ever may be the time it is suppose if those timings are varying weekly once a
         day but in that single day or next day if it was more than once..then better scheduling the
          communication channels to be start for and to be process for that particular 2 days and remaining days
          it wont work I mean stopping Cc
    5. Now when come to process...in scheduling...
    a) Click RWB>Component Monitoring>Communication Channel monitoiing
    b) Right side u can check Availability TIme planning option click that..a seperate window will opens
        THere u can observe these options..
    c) also u can see the log
    I hope it will be useful to you...
    Availability plan--> ONCE /DIALY / WEEKLY/ MONTHLY based on your req select any one...
    Create: to create the scheduling...
    change: to change the existing one
    Save: to save
    Reset if u want toreset alll
    Delete and copy also as u know these..
    While creating you can again see these options 3 main TABS
    details:  --> Corresponding details
    CC: select ur chanel
    OPTION 2
    In XI 3.O you can directly do scheduling there after selecting the radio button of any Comunication channel and there adjacent to Audit log u can see availability time plan other than rt side top corder..
    I hope it will be useful to u
    Regards
    Amar Srinivas Eli

  • Scheduled Stop and Start all PI communication channels

    Hi,
    Is there a way to Schedule Stop all PI communication channels at perticular time and start back at pertuclar date and time?
    or is it only a munual way? stop all sender communication channels? if so, how do i keep track of the channels proprties details? like automatic control, external control off etc?
    Thanks.
    Prema

    Hi Prema,
    You may try the below steps to start and start the channels automatically.
    1> Open page http://<<hostname>>:<<portnumber>>/mdt/channelmonitorservlet
    2> click on "Availability Time Planning" on right top of your page.
    3> click on create. Fill up the requied details. Please note the below example is for the channel for which I want to be up only from Monday to Saturday and for only one hour on these days from 11AM to 12PM.
    Go to "communication channels" tab enter the channel name as below and it will select the channels for which you want this schedule to work.
    Activate this and in communication channel make sure that these channels are in "automatic control". You may do further trial on this and it should serve your purpose if your system has fixed start downtime and fixed start up time.

  • SSRS Report queries begin running slowly, have to stop and start report server to restore performance

    We have had a production issue crop up twice now where reports begin running slowly seemingly at random.  
    When this happens we can see from running SQL Profiler that the report queries are taking an extremely long time to execute.  The same queries when run directly in management studio run quickly.  
    Initially I suspected parameter sniffing, and tried using OPTION (RECOMPILE) in the reports, as well as clearing out the particular query from the plan cache and running the SQL in SSMS to try and get a better plan etc but no amount of jiggery pokery by
    me could get the queries to run any faster.
    The really weird thing - is that stopping and starting the report server via the reporting services configuration manager instantly cures the problem.  
    I'd really love to know - why this might be?  Is it something to do with the report server closing and re-opening its connections to the database? That's the only sort of thing I can think of...any ideas? Anyone? Any suggestions would be much appreciated.
    LucasF

    Hi LucasF,
    In your scenario, usually we can monitor the execution log in Report Database. If you run below query, you can get the results how long the report takes to render (TimeRendering), how long to process the report(TimeProcessing) and how long to retrieve data
    from Database(TimeData). You can check the starttime and endtime to know the total time for executing a report.
    SELECT TOP1000 *FROM[ReportServer].[dbo].[ExecutionLog2]
    More details information, please reference to similar thread below:
    Steps for troubleshooting a slow SSRS 2014 server
    Troubleshooting Reports: Report Performance
    In SQL Server Reporting Services, a job will be created by SQL Server Agent if any of the following processes is underway:
    query execution on a remote or local database server
    report processing
    report rendering
    To cancel a job that is running on the report server, we can cancel the job directly or reduce the report execution time-out value in the SQL Server Management Studio and then will stop query execution. Please refer to the steps below:
    Open SQL Server Management Studio, and connect to "Reporting Services".
    Under the Report Server node, right-click on the "Jobs" folder and select "Refresh". Then, right-click on "Jobs" again and click "Cancel All Jobs".
    Right-click on the Report Server node and open the "Server Properties" dialog.
    Click the "Execution" option, and set the "Limit report execution to the following number of seconds:" to a much smaller number. After this issue is resolved, this configuration should revert to the previous state.  
    Reference:
    Managing a Running Process
    Setting Time-out Values for Report and Shared Dataset Processing
    In addition, we can also use the KILL Transact-SQL statement to terminate a normal connection by terminating the transactions that are associated with the specified session ID. For the details information, you can refer to:
    KILL (Transact-SQL)
    If you still have any problem, please feel free to ask.
    Regards,
    Vicky Liu
    Vicky Liu
    TechNet Community Support

  • Stops and starts in video streaming from iphone to tv using apple tv and airplay.Both devices have latest software and are capable.

    When try to stream content (specifically, videos from Acorn.com) to my TV through my apple TV from my iphone 5,The video  freezes, stops and starts continually, even though it is playing smoothly on the screen of my iphone.  both iphone, Apple TV  are capable models and have latest software updates.
    What's wrong here?

    Not necessarily, but right now you don't have a stable network and there are a lot of factors that can compromise that. I didn't say ethernet was the only option, again you can get a report of your network to see the status.  Would have to change things in order to strengthen the wifi signal (i.e. router location, channel,placement of ATV etc). I am running on wireless without issue, same as most users, and if you took it to a controlled environment (like Apple) you would see similar results.

  • Stop and Start BI Publisher 12c OEM

    How to stop and start BI Publisher which is installed in 12c OEM. OMS is running on OEL 64 bit.
    I need a help in doing this step by step commands. Wherever i read it says Stop BI Publisher using weblogic Administration console which I don't have an idea...
    Please help on this...

    Please post it in Oracle Database community for better audience and responses.

  • Every video or podcast stops and starts every second

    Any help would be appreiciated, using Chrome, Windows XP Pro with SP3, Pentium 4 2.4GHz, with 2GB Ram, with Nvidia Gforce 5200 video card! Too old a system??

    hi, all three are pretty much the same, and its not a buffering issue. I hav Verizon Fios and had a WUGNET speed test show download speed being 11.3 Mbps and upload of 1.24. It was possible the Html was slightly better but not by much.
    Jim
    Date: Thu, 25 Oct 2012 15:22:01 -0600
    From: [email protected]
    To: [email protected]
    Subject: Every video or podcast stops and starts every second
        Re: Every video or podcast stops and starts every second
        created by Chris Campbell in Using Flash Player - View the full discussion
    That should be fine for system specs.  My first guess would be network bandwidth issues.  Does it seem like the video/audio buffers fast enough or does the buffer continue to run out when the item is played? Try these two links out, do either of them play better? HTML5 videoNon-HTML5 video Thanks,Chris
         Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/4801142#4801142
         Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4801142#4801142
         To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4801142#4801142. In the Actions box on the right, click the Stop Email Notifications link.
         Start a new discussion in Using Flash Player by email or at Adobe Community
      For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

  • Order of stop and start of reporting services

    Hi All,
    I am using 11.1.1.3 version in my laptop,i want know the correct order of stop and start the services,please help me on this.
    Thanks
    Hypuser

    The full order list can be found at :- http://download.oracle.com/docs/cd/E12825_01/epm.111/epm_install/ch05s02.html
    Cheers
    John
    http://john-goodwin.blogspot.com/

  • Need to use only one sender and receiver communication channel.

    Hello Experts.
    I have a scenario where in I have to use only one sender and receiver communication channel to push files from different source directories to different receiver directories.
    For Eg;
    Sender                              
    D://dir1/file1 --->                  E://dir1/File1
    F://dir2/file2 ---->                 G://dir2/file2
    H://dir3/file3----->                 I://dir3/file3.
    Can this be achieved by using pass through scenario?
    Please let me know if the requirement is not clear.     
    Thanks in advance.
    Advit Ramesh

    Hi Advit,
    I think it is possible. You have to use the Advanced Selection for Source file in the sender channel to define multiple files to be picked up. Also, the Dynamic configuration must also be enabled and used in the mapping so you can manipulate the target directory and target file name based on your source files.
    For Polling from multiple directories:
    http://wiki.scn.sap.com/wiki/display/XI/File+Sender+Adapter+-+Polling+Multiple+Directories
    Dynamic Configuration:
    Dynamic file name and directory in Receiver File Adapter - summary of possibilities - Process Integration - SCN Wiki

  • Music skips and stops and starts

    Hello, we have just got a nano to replace a 3rd gen iPod.
    I have around 50 gigs of music on a lacie USB drive, and the music plays flawlessly from here in iTunes.
    However once imported into the nano, there is distortion, jumps and clicks in the music and sometimes the song will just stop and start from the beginning.
    Any ideas?

    Gary,
    You chould check out this thread we have going.
    http://discussions.apple.com/thread.jspa?threadID=356911&tstart=0
    Toshiba Satellite P25-609   Windows XP Pro   Media Center Edition iPod Nano 2G (as black as my cold, dead heart)

  • How may I automatically stop and start Mail services at a set time please

    Hi folks. I was wondering if anyone could tell me how to automatically stop and start Mail services (or any other services) at a set time please in Leopard Server? Is there a script someone has created which might help?
    Cheers, David ( a realy newbie when it comes to administering OS X server)

    launchd works through a series of XML documents that define tasks to run, either at launch, on a time schedule, in response to network events, etc.
    So you'll need to create two .plists - one to start the mail server and one to stop it. They should be saved in /Library/LaunchDaemons. I'd suggest something like:
    /Library/LaunchDaemons/local.postfix.stop.plist:
    <?xml version="1.0" encoding="UTF-8"?>
    <!DOCTYPE plist PUBLIC "-//Apple Computer//DTD PLIST 1.0//EN" "http://www.apple
    .com/DTDs/PropertyList-1.0.dtd">
    <plist version="1.0">
    <dict>
      <key>Label</key>
      <string>local.postfix.stop</string>
      <key>ProgramArguments</key>
      <array>
        <string>/usr/sbin/serveradmin</string>
        <string>stop</string>
        <string>mail</string>
      </array>
      <key>StartCalendarInterval</key>
      <dict>
        <key>Hour</key>
        <integer>1</integer>
        <key>Minute</key>
        <integer>00</integer>
      </dict>
    </dict>
    </plist>
    and /Library/LaunchDaemons/local.postfix.start.plist:
    <?xml version="1.0" encoding="UTF-8"?>
    <!DOCTYPE plist PUBLIC "-//Apple Computer//DTD PLIST 1.0//EN" "http://www.apple
    .com/DTDs/PropertyList-1.0.dtd">
    <plist version="1.0">
    <dict>
      <key>Label</key>
      <string>local.postfix.start</string>
      <key>ProgramArguments</key>
      <array>
        <string>/usr/sbin/serveradmin</string>
        <string>start</string>
        <string>mail</string>
      </array>
      <key>StartCalendarInterval</key>
      <dict>
        <key>Hour</key>
        <integer>4</integer>
        <key>Minute</key>
        <integer>00</integer>
      </dict>
    </dict>
    </plist>
    You'll need to either use launchctl load /Library/LaunchDaemons/local.postfix.stop (or start) to load the tasks, or reboot your server.
    I'm curious, though, as to why you want to do this. Mail is typically one of the services that people want to run 24/7 so they don't miss out on any emails (even though SMTP can tolerate this). Why do you want to shut yours down?

  • MacBook Pro hard disk stops and starts

    Why does the hard disk on MacBook Pro stop and start every 15 minutes or so? All operations suddenly stop for five to ten seconds during the spin down. I don't recall this happening in OS 10.5. The preference "Put the hard disk to sleep when possible" is NOT ticked, therefore the drive should never spin down.
    Any ideas?

    Try resetting your SMC.   Resetting the System Management Controller  >>
    17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G + 120G OCZ Vertex 3 SSD Boot HD 

  • APEX 4.2 aligning issue of Stop and Start Grid Layout item

    My APEX application application is in the process of moving from 4.0 to 4.2.  I am experiencing an issue with aligning (left margin justified) of Stop and Start Grid Layout items that have a border around them.  Earlier I had an issue with the border itself not showing up in the 4.2 application.  I was able to resolve that with a workaround by adding inline code in the CSS section of the page: #P23_OFFICE_START_TBL {width:682; border:1px solid #369; margin:5px;}. This created the border which I needed, but there are 2 Stop and Start Grid Layout items that are indented and not aligning with the border of the previous line.  I have tried a number of different things but none of them have worked.  This seems like a very simple issue to fix but I am having a tough time resolving it.
    I tried to put the item in question in a different grid, which corrected the indention but then I lost the border around the item.  It seems that the above CSS code does not work on the new grid.  I also tried to put attributes such as margin-left:5px; float: left; clear: left; float: left, in the CSS code but that did not work, too.
    Any suggestions?
    Thanks
    Ajay K

    I deleted and added back the Stop and Start Grid Layout items not aligning properly.  This worked.  Apparently, the 4.0 to 4.2 upgrade did not handle/convert these items properly.  Deleting and adding them back resolved the issue.

  • Burned DVD issues in DVD player not reading or music issues stop and start

    I'm a PC converted to a MAC (less than a month) and love it so far. I have been able to create and burn a DVD. The problem I'm having is one DVD player will not read the DVD (Hitachi). The other DVD player will play it, but the music stops and starts when it transitions (twirl) to another picture (Panasonic DVD/VHS combo). I'm using a DVD R Memorex. Neither one of the player are new. Would love to use this to make the Grandparent's a DVD of the grandchildren from birth to present as Christmas present. What do I need to use or do to be able to watch on any DVD player as well as the computers?
    Message was edited by: me01

    Hi me01
    Welcome to apple discussions. Try using 99 photos / less to avoid issues with audio fades / drops. Also do a search for Memorex on this forum and you'll see it's not the first choice of dvd's for most users. Instead try Verbatim, Maxell, or Taiyo Yuden and burn at 4x from a disc image for best results. Wish you luck and feel free to post back with results or any further questions.
    Disclaimer: Apple does not necessarily endorse any suggestions, solutions, or third-party software / products that may be mentioned in this topic. Apple encourages you to first seek a solution at Apple Support. The following links are provided as is, with no guarantee of the effectiveness or reliability of the information. Apple does not guarantee that these links will be maintained or functional at any given time. Use the information above at your own discretion.
    Message was edited by: SDMacuser

  • Srvctl on 11.2.0.3 does not stop and start listeners

    I recently installed the Grid software under the "grid" user on RH5. Clusterware and ASM run under GRID_HOME, the single instance database runs under ORACLE_HOME. I have created 2 listeners on non-default ports (manually using entried in listener.ora) and then added to srvctl (srvctl add listerner -l LISTENER_XPT -o /app/oracle/product/dhome_1 -p "TCP:1523" -- in ORACLE_HOME.
    When stopping the listener using:
    oracle@#####>srvctl stop listener -l LISTENER_XPT -- note starting with oracle user in ORACLE_HOME. Below is from "/app/grid/product/11.2.0/grid/log/server_name/agent/ohasd/oraagent_grid/oraagent_grid.log
    2012-06-12 12:48:00.549: [ora.LISTENER_XPT.lsnr][1125030208] {0:0:1233} [check] (:CLSN00010:) TNS-00511: No listener
    2012-06-12 12:48:00.549: [ora.LISTENER_XPT.lsnr][1125030208] {0:0:1233} [check] (:CLSN00010:) Linux Error: 111: Connection refused
    2012-06-12 12:48:00.549: [ora.LISTENER_XPT.lsnr][1125030208] {0:0:1233} [check] (:CLSN00010:)Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1523)))
    2012-06-12 12:48:00.549: [ora.LISTENER_XPT.lsnr][1125030208] {0:0:1233} [check]
    **********FROM TAILING THE listener LOG ****************************
    TNS-01190: The user is not authorized to execute the requested listener command
    12-JUN-2012 12:44:12 * (CONNECT_DATA=(CID=(PROGRAM=)(HOST=v01orarac01w)(USER=grid))(COMMAND=status)(ARGUMENTS=64)(SERVICE=LISTENER_XPT)(VERSION=186647296)) * status * 0
    TNS-01195: Listener rejected registration of endpoint "(ADDRESS=(PROTOCOL=TCP)(HOST=10.5.87.5)(PORT=1523)(IP=FIRST))"
    12-JUN-2012 12:50:02 * (CONNECT_DATA=(CID=(PROGRAM=)(HOST=v01orarac01w)(USER=grid))(COMMAND=status)(ARGUMENTS=64)(SERVICE=LISTENER_XPT)(VERSION=186647296)) * status * 0
    TNS-01190: The user is not authorized to execute the requested listener command
    12-JUN-2012 15:12:58 * (CONNECT_DATA=(CID=(PROGRAM=)(HOST=v01orarac01w)(USER=grid))(COMMAND=status)(ARGUMENTS=64)(SERVICE=LISTENER_ADMIN)(VERSION=186647296)) * status * 0
    12-JUN-2012 15:12:58 * version * 0
    12-JUN-2012 15:12:58 * service_register * LsnrAgt * 1195
    TNS-01195: Listener rejected registration of endpoint "(ADDRESS=(PROTOCOL=TCP)(HOST=********)(PORT=1524)(IP=FIRST))"
    12-JUN-2012 15:12:59 * (CONNECT_DATA=(CID=(PROGRAM=)(HOST=********)(USER=grid))(COMMAND=status)(ARGUMENTS=64)(SERVICE=LISTENER_XPT)(VERSION=186647296)) * status * 0
    12-JUN-2012 15:13:05 * (CONNECT_DATA=(SID=PRDRAC01)(CID=(PROGRAM=perl)(HOST=********)(USER=oracle))) * (ADDRESS=(PROTOCOL=tcp)(HOST=*******)(PORT=41398)) * establish * PRDRAC01 * 0
    Why wouldnt the Oracle user not be able to start/stop a resource from ORACLE_HOME ? Any assistance would be helpful

    I just removed the listener out of the ORACLE_HOME and added it using srvctl to the GRID_HOME. Now I am able to stop and start.
    Still the question, why cant oracle user start an oracle_home managed resource. But the oracle user could start and stop using lsnrctl stop/start
    Below if the results from ps (note I just started listener from GRID_HOME):
    grid@PRODBLD:+ASM>ps -ef |grep lsnr
    grid 9114 1 0 09:40 ? 00:00:00 /app/grid/product/11.2.0/grid/bin/tnslsnr LISTENER_ADMIN -inherit
    grid 10348 1 0 Jun12 ? 00:00:00 /app/grid/product/11.2.0/grid/bin/tnslsnr LISTENER -inherit
    grid 20234 21990 0 09:49 pts/2 00:00:00 grep lsnr
    oracle 29926 1 0 Jun12 ? 00:00:00 /app/oracle/product/11.2.0/dbhome_1/bin/tnslsnr LISTENER_XPT -inherit

Maybe you are looking for

  • Error while running QTD using TODATE

    Hi All, I am having two tables TIME_DIM (YEAR->Quarter->Month) with ID Iam having a sales fact table (ID,TIME_ID,Sales). I have a time dimension with Year at root level and Month as ChronologicalKey. I have made a aggregation rule as sum on Sales col

  • Using iPod in Target Disk Mode

    Hi all. I have a Powerbook G4 and am being asked to fix a friend's iBook G4. I want to connect the PB and iB together via firewire and boot the iB in target disk mode. My question is, could I back up the contents of their hard drive to my iPod hooked

  • Trouble with flash and image links

    Hi I have been using Dreamweaver for a while, but only for simple websites. I have now started on a new site, using a template based on css, with two sidebars. I am new to using css, and are "learning by doing" I wanted to use flash to make navigatio

  • Exporting a video

    What is the best format for exporting a video with an H.264 codec?

  • Update was terminated: maintain output device. How to avoid?

    Hi, I created a smartform, and when it is printed, we get the error: Please maintain an output device in your user master data. The client wants to avoid this error, without having to maintain the output device in the user master data. So I look for