Stop capture vs stop change set

Hi
i am doing some work with cdc stream, whats the diffrence between stopping capture/apply and disabling change set?
which one is recomended way of stopping the cdc ?
v11.2

Hi
Please share that
What you want to do/Specific requirements?
Oracle MetaLink v11.2
Streams Synchronous Capture 11g New Feature Example [ID 1109293.1]
Edited by: hitgon on Jun 22, 2012 5:18 PM

Similar Messages

  • Capture Now - stops at 31min but system is set to stop at 63min! (?)

    Folks, this one is puzzling me so I would appreciate any suggestions.
    I have "Capture Now" limited to 63 minutes, however, FCP stops capturing around 31mins with the message that it has reached the limit set by the user! I tried with two different tapes with the same result. Have quit FCP and restarted with the same results.
    Any ideas?
    Thanks in advance,
    Ismenio

    Hi Jerry (and anyone interested in this). I've been trying to troubleshoot this for days now and came to a conclusion: I think the problem is with a couple of tapes!
    I checked the capture now settings, as Jerry mentioned, both for time and size and everything looked fine. Size wasn't even checked but I checked it and increased the size anyway, on and off, but getting the same results: the capture always stops at around 31 minutes.
    Then I started capturing other tapes (same brand, recorded in the same camera (Canon HV30)) and no problems there! Oh well! I just manually "glued" the two clips for the same tape that I had to manually adjust so as to capture the rest of the 30min of footage (sorry, don't know the right term!)
    Weird isn't it? It's not like at the 31min mark a scene changes or there was a pause in the filming
    Thanks again for your help Jerry.
    Best regards,
    Ismenio

  • How do I stop iTunes from automatically changing artist, album.....?

    How do I stop iTunes from automatically changing artist, album, and genre names?
    I keep my itunes library folder very organized. You wont find the same artist spelled two different ways in it. But itunes automatically changes the artists, album names, and genres for whatever reason, making it so I have to edit my library all over again.

    No, don't check it!
    That is the only setting that would let itunes change file names. Read right underneath it - itunes will create files & folders based on artist & album name.
    Something else must be changing your files, then - not iTunes.
    Every PC comes with WIndows Media Player. Go into that and uncheck the options to retreive internet info for albums. It's in 2 places, on the Library tab and the Privacy tab.
    Message was edited by: Katrina S.

  • OGG for SQL Server - Extract stops capturing - Bug?

    Hi, all,
    I've found a problem with OGG for SQL Server where the Extract stops capturing data after the transaction log is backed up. I've looked for ways to reconfigure OGG to avoid the problem but couldn't find any reference to options to workaround this problem. It seems to be a bug to me.
    My Extract configuration is as follows:
    EXTRACT ext1
    SOURCEDB mssql1
    TRANLOGOPTIONS NOMANAGESECONDARYTRUNCATIONPOINT
    EOFDELAY 60
    EXTTRAIL dirdat/e1
    TABLE dbo.TestTable;
    I'm using the EOFDELAY parameter for testing purposes only, since it's easy to reproduce the scenario that causes the issue when the extract polling is configured with longer intervals.
    When the Transaction Log backup runs, SQL Server marks all the virtual logs that are older than the primary and secondary truncation points as inactive (status = 0). These virtual logs can then be reused if required. They still contain change records, though, and OGG can read from then if required, before they are overwritten. This situation will never occur if we are not using SQL Replication and have the Extract configured with the parameter MANAGESECONDARYTRUNCATIONPOINT.
    However, I'm trying to simulate a scenario where OGG is used along SQL Replication and the extract is configured with the NOMANAGESECONDARYTRUNCATIONPOINT option. The situation that I've reproduced and caused the Extract to stop capturing is the follow sequence of events:
    1. Extract reads transaction log and capture change up to LSN X
    2. More change are made to the database and the LSN is incremented
    3. Log Reader reads Transaction Log, captures changes up to LSN X+Y and advances the secondary truncation point to that LSN
    4. A transaction log occurs, backs up all the active virtual logs, advances the primary truncation point to a LSN greater than LSN X+Y, and marks all the virtual logs with LSNs <= X+Y as inactive (status = 0)
    5. Changes continue to happen in the database consuming all the available inactive virtual logs and overwriting them.
    6. The extract wakes up again to capture more changes.
    At this point, the changes between LSNs X and X+Y are not in the Transaction Log anymore, but are available in the backups. From what I understood in the documentation the Extract should detect that situation and retrieve the changes from the Transaction Log backups. This, however, is not happening and the Extract becomes stuck. It still pools the transaction log at the configured interval query the log state with DBCC LOGINFO, but doesn't move forward anymore.
    If I stop and restart the Extract I can see from the trace that it does the right thing upon startup. It realises that it requires information that's missing from the logs, query MSDB for the available backups, and mine the backups to get the required LSNs.
    I would've thought the Extract should do the same during normal operation, without the need for a restart.
    Is this a bug or the normal operation of the Extract? Is there a way to configure it to avoid this situation without using NOMANAGESECONDARYTRUNCATIONPOINT?
    The following is the state of the Extract once it gets stuck. The last replicated change occurred at 2012-07-09 12:46:50.370000. All the changes after that, and there are many, were not captured until I restarted the Extract.
    GGSCI> info extract ext1, showch
    EXTRACT EXT1 Last Started 2012-07-09 12:32 Status RUNNING
    Checkpoint Lag 00:00:00 (updated 00:00:54 ago)
    VAM Read Checkpoint 2012-07-09 12:46:50.370000
    LSN: 0x0000073d:00000aff:0001, Tran: 0000:000bd922
    Current Checkpoint Detail:
    Read Checkpoint #1
    VAM External Interface
    Startup Checkpoint (starting position in the data source):
    Timestamp: 2012-07-09 11:41:06.036666
    LSN: 0x00000460:00000198:0004, Tran: 0000:00089b02
    Recovery Checkpoint (position of oldest unprocessed transaction in the data so
    urce):
    Timestamp: 2012-07-09 12:46:50.370000
    LSN: 0x0000073d:00000afd:0004, Tran: 0000:000bd921
    Current Checkpoint (position of last record read in the data source):
    Timestamp: 2012-07-09 12:46:50.370000
    LSN: 0x0000073d:00000aff:0001, Tran: 0000:000bd922
    Write Checkpoint #1
    GGS Log Trail
    Current Checkpoint (current write position):
    Sequence #: 14
    RBA: 28531192
    Timestamp: 2012-07-09 12:50:02.409000
    Extract Trail: dirdat/e1
    CSN state information:
    CRC: D2-B6-9F-B0
    CSN: Not available
    Header:
    Version = 2
    Record Source = A
    Type = 8
    # Input Checkpoints = 1
    # Output Checkpoints = 1
    File Information:
    Block Size = 2048
    Max Blocks = 100
    Record Length = 20480
    Current Offset = 0
    Configuration:
    Data Source = 5
    Transaction Integrity = 1
    Task Type = 0
    Status:
    Start Time = 2012-07-09 12:32:29
    Last Update Time = 2012-07-09 12:50:02
    Stop Status = A
    Last Result = 400
    Thanks!
    Andre

    It might be something simple (or maybe not); but the best/fastest way to troubleshoot this would be to have Oracle (GoldenGate) support review your configuration. There are a number of critical steps required to allow GG to interoperate with MS's capture API. (I doubt this is it, but is your TranLogOptions on one line? It looks like you have it on two , the way it's formatted here.)
    Anyway, GG support has seen it all, and can probably wrap this up quickly. (And if it was something simple -- or even a bug -- do post back here & maybe someone else can benefit from the solution.)
    Perhaps someone else will be able to provide a better answer, but for the most part troubleshooting this (ie, sql server) via forum tends to be a bit like doing brain surgery blindfolded.

  • Automator Stop Capture error

    I was trying to make a screen capture service, but have been hitting errors in the Start Capture and Save Capture actions. I tried to make a service as simple as New Screen Capture > Wait for User Action > Stop Capture, but it gives me an error on the Stop Capture action (even though it does stop the recording). The error just says "can't make missing value into type alias."

    Clicky23 wrote:
    Cool, at least that lets the workflow keep going. It's still not returning the video
    Here's a script that returns the new Quicktime video to the next action, even if the user has already opened other video.
    on run {input, parameters}
        tell application "QuickTime Player" to if exists document 1 then
            try
                set screenRecordingDoc to first document whose its current screen compression's name is not ""
                set allDocs to name of documents
                try
                    stop screenRecordingDoc -- to stop capture
                end try
                repeat 5 times
                    my waitSec(1)
                    if not (exists screenRecordingDoc) then exit repeat
                end repeat
                repeat with tDoc in (get documents)
                    if name of tDoc is not in allDocs and file of tDoc is missing value then -- a new doc name ("Untitled x") in the list of names, and this document is not a file
                        return contents of tDoc -- return the new Quicktime video
                    end if
                end repeat
            end try
        end if
        return {} -- no screen capture or no document
    end run
    on waitSec(n)
        do shell script "sleep " & n
    end waitSec

  • Capture ends randomly - I want to select when to stop capture

    Can Premier be set up to capture continuously?  Why does it randomly stop capture?  I want to capture video until I manually press the"Stop" button.

    It's a long term fault with PRE. There are however some freeware applications that WILL capture until you select to stop:
    For DV:
    WinDV
    Exsate DV Capture Live
    For HDV:
    HDVSplit utility for HDV capturing
    Cheers,
    Neale
    Insanity is hereditary, you get it from your children

  • TS3694 My Ipod is not recognized by Itunes with my Windows 8 PC. Works fine with Windows 7 PC. Device sync test says "No device found". Already performed all of the Ipod device troubleshooting including reload Itunes, stop start Ipod device, changed drive

    Need help? Some of my Ipods are not recognized by Itunes with my Windows 8 PC. (Ipod Nano 4th gen  and Ipod Nano 6th gen), but on my Windows 7 PC, they work fine.  My Ipod 3rd gen and Ipod shuffle work both on Windows 8 and 7 PC's.  On the non-working Ipods, the  Device sync test says "No device found". Already performed all of the Ipod device troubleshooting including reload Itunes, stop start Ipod device, changed drive letter...
    any help is appreciated. Chris4sail

    Hello there, chris4sail.
    The following Knowledge Base article offers up some great step-by-step instructions on troubleshooting your iPod not being recognized in iTunes:
    iPod not recognized in My Computer and in iTunes for Windows
    http://support.apple.com/kb/ts1369
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro.

  • How do i stop my itunes from changing the location of my itunes media.  i have it saved on a external HD and it keeps changing back to my local drive with out being told

    how do i stop my itunes from changing the location of my itunes media.  i have it saved on a external HD and it keeps changing back to my local drive with out being told

    No, an external drive will not always be mounted. If the drive goes to sleep, it can unmount, or it may unmount for other reasons. As Chris said, confim that the drive is mounted and active before launching iTunes.
    Regards.

  • When playing music on my iPhone 4 using earphones when out for a run, I select shuffle and only 3 or 4 songs play then the music stops as if I have set only 3 songs to play. How do I correct this??

    When I am out for a run using earphone and a running APP I set my iphone 4 to shuffle songs but suddenly only 3-4 or 5-6 songs play and then they stop as if I set something to only play a certain number of songs from my playlist, its really irritating as I have to stop and press shuffle again, it happens with all my playlists and never mid song. This is a sudden issue as before I would just select shuffle and run and the music kept playing until I stopped it. Have I set something in error?? have looked at settings in General and in music and I am not sure what to do? any ideas??

    Just realised this happens without earphones and without using the running app. My iphone will only play 2 songs when I select shuffle in any playlist, driving me mad!

  • The finder window for an external USB hard disk suddenly started separating files by time (today, yesterday, etc.) and stopped allowing me to change column width, order, etc. Also the header bar shifted to flat white from gray.

    The finder window for an external USB hard disk suddenly started separating files by time (today, yesterday, etc.) and stopped allowing me to change column width, order, etc. Also the header bar shifted to flat white from gray.
    All was normal until the icon for the disk stopped showing up on the desktop when I would plug it in. I rebooted the computer, and the disk icon now shows up but this new look to the finder window started as a result. The hard disk does not have this problem when I use it on another Mac running Snow leopard. Also, two other external hard disks that I use on this computer running lion 7.4 still have the normal header bars with columns that can be reordered, etc.
    I have tried looking in preferences and other places but have not seen this discussed. 

    Well duh - I finally figured out that somehow in the View options for the hard drive, the "arrange by" option had been changed to "by date" from "none". Not sure how that happened, I had never used the "view options" menu tem before. Changing "arrange by" back to "none" gets the gray column headers and the collapsible folder icons back. 

  • How to stop  the users from changing the Decimal in SAP

    How  to stop  the users from changing User Profile

    Hai,
    It is not possible to restrict SU3 to display, because it has only S_TCODE has the authorization object.
    If you really want to restrict users from changing their profile you have to remove the SU3 access and give SU1 or SU2 which gives access only to Personnel details and Parameters.
    Hope this helps.
    Regards,
    Yoganand.V

  • Stops capturing after a few minutes

    FCut Express 4 importing firewire tape from camcorder. Final Cut stops capturing after a few minutes. Same problem if I use iMovie

    Can you provide details as to how your camera is connected,
    what camera model, is an external drive involved, what type, how is it formatted?
    Al

  • Audio stops playing on page change

    Audio stops playing on page change if horizontal sliding only is checked. But it works when it is unchecked (InDesign CC)  I would like it works in both cases. Is it possible ? I know it was not possible a few months ago...
    Have another question : audio controller doesn't update on page turn even if the audio file is linked to the first one. Any idea ?
    Thanks for your help

    Hi Alexmamba,
    I can't see how you would insert the coding for this option.  You'd need markers for the start and ending of any particular chapter.
    Is this a book related to music?  As a reader, I'm not sure I would want to listen to music the entire time I'm reading, unless there was an option to turn it off.  It's like webpages that automatically play music when you visit the site.  What the author of the site thinks is great music is usually distracting to the reader.
    My intention is not to be rude, by the way.  Just putting the comments out there for consideration.

  • Audio stops playing on page change if horizontal sliding only is checked.

    Audio stops playing on page change if horizontal sliding only is checked. But it works when it is unchecked (InDesign CC)  I would like it works in both cases. Is it possible ? I know it was not possible a few months ago...
    Have another question : audio controller doesn't update on page turn even if the audio file is linked to the first one. Any idea ?
    Thanks for your help

    Find another Mac and check that the A&H works, report back.
    You should also consider a decent external interface, recording off the minijack is the worst choice.

  • I've imported some midi tracks, used the mixer to set pan, volume etc, but when I stop playback and restart it sets every midi track back to '0'. I've been using LE for years, this is a new one, any ideas?

    I've imported some midi tracks, used the mixer to set pan, volume etc, but when I stop playback and restart it sets every midi track back to '0'. I've been using LE for years, this is a new one, any ideas?

    Hi,
    that's because Logic reads the volume information out of the imported MIDI tracks and sets the volume fader according to this information. The MIDI information overrides volume settings you have done, so you have to identify the MIDI events that contain volume (or expression or pan or whatever) information and delete them. You can use the event list editor for this.
    Fox

Maybe you are looking for