Stop processing of current iteration in the loop
Hi all,
In pl/sql how can i skip the rest of the loop body when a condition occurs and go to the next iteration?
just like 'continue' statment in c.
Thank you,
Glen.
Please read the following link - i think you will get your answer -
Re: "Continue" in plsql loop
Regards.
Satyaki De.
Similar Messages
-
I have found that my Mac Book Pro late 2011 15 inch is slower than I expected with certain downloads, or working with iPhoto than expected compared to my previous Windows 7 PC. Would adding RAM be of any value in speeding up the process?
how to tell if your mac needs more ram
-
Guys what is the command to go to the beginning of the loop.Example
int var = 0;
while(var <= 10){
var = var + 1;
if (var == 5){
go back to while loop
do something a
do something b
do something c
do something d
}break goes to the bottom of the loop (it ends the loop), continue goes to the top of the loop (interrupts the current iteration of the loop and goes to the next iteration).
-
Need new result file for each iteration of a loop
I am using TestStand 2010 SP1. I have a main sequence that essentially does the following:
Initialize the test equipment and set up the test environment [Sequence Call]
Start Loop
Run Tests [Sequence Call]
End Loop
Because testing can continue for hours, the resultant report file is enormous and difficult to evaluate. I need to create a new result file for each loop iteration. I know that starting a new execution of “Run Tests” will create a result file for each iteration of the loop, but the new execution will not have access to the handles to the test equipment that were made during initialization. The testing is time critical, therefore initializing the test equipment and setting up the test environment must occur outside of the loop.
How can I programmatically create a new result file at the beginning of the loop and close the result file at the end of the loop? I am open to any other suggestions. Thank you in advance for your help!Hi,
You could modify your process model by making a copy of Test UUTs entry point. Then make the loop that usually tests multiple UUTs into your loop. Take the loop and init out of your sequence. You can init in PreUUTLoop or the other pre loop sequence, and maybe store your references in runstate.root.Locals and pass them to MainSequence. Then you can use Report Options to set it for separate report files.
cc -
The attached file is work inprogress, with some dummy data sp that I can test it out without having to connect to equipment.
The second tab is the one that I am having the problem with. the output array from the replace element appears to be starting at the index position of 1 rather than 0 but that is ok it is still show that the new data is placed in incrementing element locations. However the main array that I am trying to build that is suppose to take each new calculation and place it in the next index(row) does not ap
pear to be working or at least I am not getting any indication on the inidcator.
Basically what I am attempting to do is is gather some pulses from adevice for a minute, place the results for a calculation, so that it displays then do the same again the next minute, but put these result in the next row and so on until the specifiied time has expired and the loop exits. I need to have all results displayed and keep building the array(display until, the end of the test)Eventually I will have to include a min max section that displays the min and max values calculated, but that should be easy with the min max function.Actually I thought this should have been easy but, I gues I can not see the forest through the trees. Can any one help to slear this up for me.
Attachments:
regulation_tester_7_loops.vi 244 KBI didn't really have time to dig in and understand your program in depth,
but I have a few tips for you that might things a bit easier:
- You use local variables excessively which really complicates things. Try
not to use them and it will make your life easier.
- If you flowchart the design (very similar to a dataflow diagram, keep in
mind!) you want to gather data, calculate a value from that data, store the
calculation in an array, and loop while the time is in a certain range. So
theres really not much need for a sequence as long as you get rid of the
local variables (sequences also complicate things)
- You loop again if timepassed+1 is still less than some constant. Rather
than messing with locals it seems so much easier to use a shiftregister (if
absolutely necessary) or in this case base it upon the number of iterations
of the loop. In this case it looks like "time passed" is the same thing as
the number of loop iterations, but I didn't check closely. There's an i
terminal in your whileloop to read for the number of iterations.
- After having simplified your design by eliminating unnecessary sequence
and local variables, you should be able to draw out the labview diagram.
Don't try to use the "insert into array" vis since theres no need. Each
iteration of your loop calculates a number which goes into the next position
of the array right? Pass your result outside the loop, and enable indexing
on the terminal so Labview automatically generates the array for you. If
your calculation is a function of previous data, then use a shift register
to keep previous values around.
I wish you luck. Post again if you have any questions. Without a more
detailed understanding of your task at hand it's kind of hard to post actual
code suggestions for you.
-joey
"nelsons" wrote in message
news:[email protected]...
> how do I create a 1d array that takes a single calculation and insert
> the result into the first row and then the next calculation the next
> time the loop passes that point and puts the results in thsecond row
> and so on until the loop is exited.
>
> The attached file is work inprogress, with some dummy data sp that I
> can test it out without having to connect to equipment.
> The second tab is the one that I am having the problem with. the
> output array from the replace element appears to be starting at the
> index position of 1 rather than 0 but that is ok it is still show that
> the new data is placed in incrementing element locations. However the
> main array that I am trying to build that is suppose to take each new
> calculation and place it in the next index(row) does not appear to be
> working or at least I am not getting any indication on the inidcator.
>
> Basically what I am attempting to do is is gather some pulses from
> adevice for a minute, place the results for a calculation, so that it
> displays then do the same again the next minute, but put these result
> in the next row and so on until the specifiied time has expired and
> the loop exits. I need to have all results displayed and keep building
> the array(display until, the end of the test)Eventually I will have to
> include a min max section that displays the min and max values
> calculated, but that should be easy with the min max function.Actually
> I thought this should have been easy but, I gues I can not see the
> forest through the trees. Can any one help to slear this up for me. -
Displaying data in chart for each iteration of FOR loop
Hi Flex experts,
I'm coding an Actionscript routine that has a series of
complex calculations within a for loop. I would like to display
some of the calculation results in a Flex chart at the end of each
iteration of the loop. Thus far, I can only get the chart to
display the results from the last iteration, but not any of the
preceding iterations.
Any tips or pointers would be greatly appreciated.
Thanks,
DeanPlease have look at callLater method. You can call your
chart-updating method thru callLater and that might help.
Otherwise, can you share some of your code in the loop?
ATTA -
Output Server stops processing files (seemingly) at random
We use Adobe Central Output Server 5.5.0.308 to process Invoices/POs and the like from CommerceCenter (An Epicor/Prophit 21 product). We have three isntances of it running on three seperate terminal servers.
It has been working pretty well for years. Sometimes it would fail to process a certain file or it would stop responding and need to be restarted, but nothing serious and never very often.
Suddenly in the last couple of months it has stopped processing files at random during the day. To get it to start again we have to open the Control Center and go to Control -> Start Server. Then it will process everything in the queue just fine. It has been happening on both of our older 2003 terminal servers fairly often (at least 4 times a week) and just happened for the first time on our new 2008 R2 terminal server.
None of us here know much about Output Server and there is nothing in the Server log or the Event Viewer that indicates any sort of issue, so we are at a loss.
I don't really even know where to begin as the documentation of the relationship between CommerceCenter and Output Server is non-existent.
I'm really looking for any ideas... Maybe somebody has run into this issue before?cnorris63,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://forums.novell.com/ -
Inside Loop, how to stop processing the current record but the next one?
We want to know which statement/command that can exit the current record processing in a loop and start to process the next record in the loop?
We've tried exit, but it jumps out the whole loop. We have tried Resume, but this command doesn't exist in ABAP.
Any idea?
Thanks!Hi,
Use CONTINUE.
Thanks,
Sriram Ponna. -
How to use no of iteration of for loop as the input for the for loop
hi all,
i wanna need some help here..
i'm using for loop to iterate to ceratin no of iteration.. then, i would like to use back the no of iteration as the input of 'N' for the next iteration..
in other word, eg:
1st run:
i insert a control to 'N', let say 80
then the iteration run until 80-1 = 79..
2nd run:
i need to insert the no of "N", let say a control of 120.. i want the loop run for "120 - 79", where the 79 is the no of previous run..
easy to say,
how can i connect the "i' as a control to ''N''
n how to make a "run' or ' GO' and ''stop'' button in the front panel and block diagram after the first run without using the stop and run from the labview window
thanks..Jim
You're entirely bonkers. But I'll tell you a secret. All the best people are. ~ Alice
Attachments:
Untitled 2.vi 9 KB -
Initializing the iterator in a loop - pointing to the first value
I have two iterators defined as given below. And I am trying to find if they have the same words remove it. It is working fine with the first set of words from the next. When I complete my fist loop and start the second one, I need to initialize the first one to the "0" position. When it finishes with the stop words list and takes the next word from the text, it just starts from the next word in the stop word list. How do I do that ? since Iteratort does not have any further methods than hasNext, next and remove ? what can be done here to point the iterator to the frist position. (As mentioned in the code with the comments).
Thanks in advance. Please advise.
Iterator itrText1 = alText.iterator();
Iterator itrWords1 = alOfStopWords.iterator();
while (itrText1.hasNext())
Object text = itrText1.next();
System.out.println("Entering first while \t" + text);
//Need to make the iterator go to the initial position
while (itrWords1.hasNext())
Object sWords = itrWords1.next();
System.out.println("Entering inner while \t"+ "Comparing words are " +
sWords + "\t" + text);
if (text.equals(sWords))
System.out.println("Entering if");
itrText1.remove();
System.out.println("Removed" + text);
break;
}// first if
System.out.println("Exiting if");
}// inner while
System.out.println("Exiting inner while");
}//outer while
System.out.println("Exiting outerwhile");If I understand what you are asking, you need to move the initialization of the second interator inside the first loop, as follows:
Iterator itrText1 = alText.iterator();
while (itrText1.hasNext())
Object text = itrText1.next();
System.out.println("Entering first while \t" + text);
//Need to make the iterator go to the initial position
Iterator itrWords1 = alOfStopWords.iterator();
while (itrWords1.hasNext())
Object sWords = itrWords1.next();
System.out.println("Entering inner while \t"+ "Comparing words are " +
sWords + "\t" + text);
if (text.equals(sWords))
System.out.println("Entering if");
itrText1.remove();
System.out.println("Removed" + text);
break;
}// first if
System.out.println("Exiting if");
}// inner while
System.out.println("Exiting inner while");
}//outer while
System.out.println("Exiting outerwhile"); -
How to Stop the process chain if it in the middle of the process?
Hi,
Is there anyway that i can stop the process chain if it is in the middle of the process already?
Raj"Hi,
First and foremost let me advice you to be very careful while doing this.
You can start from SM37, find the process WID/PID then go to SM50 or SM51 and kill it. Once its done come back to RSMO and check the request, it should be red but again manually force to red and save by clicking on the total status button in the status tab. This shuld ensure that the process is killed properly.
The next step will be to go to targets that you were loading and remove the red requests from those targets.
Note: For source system loads you may have to check if the request is running in the source system and kill if needed and pull it again.
But for BW datamart delta loads u may have reset the datamarts in case u are going to pull the delta again.
Different Ways to stop process chain
1)SM37 -->Kill Job
2)SM50/sm66- ->Kill process
3)RSPC>Job Log>Make the process RED forecefully.
4)RSPC>Process chain> main Menu"Remove from Scheduling" OR
5)se37-->RSPC_API_CHAIN_INTERRUPT
give RFC BW system name(technical) and process chain name(technical)
Steps 1 -3 stops the chain running in process
Steps 4-5 stops the chain AFTER the current job which is running is completed as sucessful or Failure by nature.
Rationale - 4-5
This function will only remove the jobs from schedule, which did not yet run. It will not kill running jobs, as this may leave the system in an inconsistent state, moreover killing processes is possible for synchronous processes only anyhow. This means, that there will be no errors with interrupted chains, which on the other
hand means an interrupted chain is not restartable. So for a running chain this function is intended to be an emergency break only. You can use it, however, to remove a scheduled chain from schedule, such that it does not start except by your product.
Re: Kill a Job
Re: Killing a process chain.
How to stop a process in a process chain?
Regards,
JituK -
My iMessage stopped working when I did the latest update on my phone. I have literally tried everything to reset it. I am currently not in the US, but my iMessage has always worked when I was in wifi and my phone is still activated. I have tried to reset my network settings, my location, and even the reset all settings. When I click on my settings and iMessage it says that it is still waiting for activation... and my phone number is grayed out. I am able to recieve an iMessage to my email and that could work for right now but i'm not sure how to start a conversation the defaults to being sent from my email and not my cell phone number. please help!
Hi shanny202.
Really strange problem you have there. I have a few questions though.
Please try again and try to make the phone as a new without restoringen with you iCloud-data or backup-data from iTunes. Maybe it is something wrong with the data (strange).
Anyway, i think you should call Apple Support or visit an Apple Store, don't forgot to make a Genius Bar reservation.
You locate the nearest Apple Store here: http://www.apple.com/retail/storelist/
And here is Apples phone numbers around the world for support: http://support.apple.com/kb/HE57 -
Since upgrading to Mavericks, my Canon MP980 printer no longer works. I've tried deleting the printer and adding it again. I've downloaded the driver software from Canon. My Mac dropbox tells me "the selected printer software is available from Apple", but when I click to download it, the process ends with my mac saying the software is not currently available from the software update server.
Open Finder and click on Go > Go to Folder. Then type
/Library/Printers/Canon
and press Enter. This will show the BJPrinter and iJScanner folders. You could try moving or trashing this folder and then installing the driver that you downloaded from Canon again. -
My Apple ID is not letting me download apps it tells me to enter account details then it says that the payment processing is currently unavailable. I don't know what's wrong but can anybody help me out here
Hello nayanika_cool_gal,
The article linked below details a number of steps that can help restore the App Store's connection to the iTunes Store.
Can't connect to the iTunes Store
http://support.apple.com/kb/TS1368
Cheers,
Allen -
Not Breaking the loop but how to continue with the next iteration in a For
Hi all
i have the following piece of code
Please let me know, what is the /*some construct*/ which will not break the loop but goes to the next iteration skipping Login b
Loop
Login A
/*some construct*/
Login B
End loop;
P.S
I should do this without Label or Exception ... I am using oracle 8i
Thanks
Hariharan
TAn [url http://www.oracle.com/pls/tahiti/tahiti.tabbed?section=48911]IF statement?
loop
login_a;
if false
then
login_b;
end if;
end loop;Regards,
Rob.
Maybe you are looking for
-
Error while amending PO in ME22N ... Messages: FICUSTOM 201 and 06 119
Hello, I am facing one problem. I have a PO with 30 items. In one item, GR is prepared and so DCGR is also prepared. Now this GR is cancelled by mvmt 102. In this case, it did not reverse DCGR document. Now this item is deleted. (Marked for deletion)
-
Looking for download file of Photoshop 7.0.
My computer crashed and I lost my install file for Photoshop 7.0. My Adobe shows my purchase date and serial number, but no download link. Can you help me find where to get the download again? Thank you, Chris Catterton
-
Quality control--any utilities or checking functions
I've run into enough bad media that checking each DVD before shipment becomes a necessity. Anyone seen an automated way to examine a burned DVD for 'disk damage' or errors or malfunctions? thanks, Scott
-
How to switch between desktop applications?
Hello Guys, I'm not familiar with windows application development but I'm working on a PC Standalone game in which I want user to make payment through my game and for this he/she is directed to paypal which open in a browser. Now here I want is that
-
Each song plays for one minute and then nano shuts down, what to do?
What to do about nano shutting down after one minute of play?