Stops and starts in video streaming from iphone to tv using apple tv and airplay.Both devices have latest software and are capable.

When try to stream content (specifically, videos from Acorn.com) to my TV through my apple TV from my iphone 5,The video  freezes, stops and starts continually, even though it is playing smoothly on the screen of my iphone.  both iphone, Apple TV  are capable models and have latest software updates.
What's wrong here?

Not necessarily, but right now you don't have a stable network and there are a lot of factors that can compromise that. I didn't say ethernet was the only option, again you can get a report of your network to see the status.  Would have to change things in order to strengthen the wifi signal (i.e. router location, channel,placement of ATV etc). I am running on wireless without issue, same as most users, and if you took it to a controlled environment (like Apple) you would see similar results.

Similar Messages

  • Trying to transfer a video clip from iPhone to iPad using transfer app it says device not found, I have used this before wifi is fine and both  devices are connected ?

    Trying to transfer a video clip from iPhone to iPad using transfer app it says device not found, I have used this before wifi is fine and both  devices are connected ?

    That does not involve iPhoto for the Mac in any way - try the iPad forum
    I will request your post be moved
    LN

  • HT1386 Can i sync multipler iOS devices like iPad, iPhones on the same iTunes? Can each iOS device have different contents which are subsets of the iTunes complete library

    Can i sync multipler iOS devices like iPad, iPhones on the same iTunes? Can each iOS device have different contents which are subsets of the iTunes complete library

    You can share a library with as many devices as you want but they cannot have seperate subsets like you wish. They would all have access to all information in the library. You could "Manually" sync content to each device by doing the following:
    On Mac: iTunes > Preferences > Devices Tab > Put a check in the box next to sentence that says "Prevent iPods, iPhones, and iPads from syncing automatically > Then click ok.
    On Pc: Edit > Preferences > Devices Tab > Put a check in the box next to sentence that says "Prevent iPods, iPhones, and iPads from syncing automatically > Then click ok.
    To manually sync data from iTunes to devices see article below:
     http://support.apple.com/kb/HT1351
    If you do not want all devices to have access to all the media from the main library, you would need to create a library for each device. See the article below for more info:
     http://support.apple.com/kb/HT1495
    Hope this helps.

  • Capturing, timestamping and saving a video stream from a webcam ?

    Hello everybody,
    Glad to be in this forum.
    I got to do a program in java doing :
    - a capture of a video stream from a webcam
    - adding time and date on it
    - saving the video stream in a video format compatible with linux and windows
    Is it possible to do that in java (using JMF I guess) ?
    Could anyone help me to progress on my project ?
    thx a lot
    agussi

    Hi agussi, yes, it's possible to do that in Java using JMF.
    I'm not a JMF expert, but I've found this code very useful: http://forum.java.sun.com/thread.jspa?threadID=570463&tstart=50
    This piece of code shows the webcam stream and you can take snapshots with it. With a little tweak you can do what you are expecting.
    I hope this helps.
    Ivan

  • Video streaming from iPhone to Apple TV only plays the sound.  How can I fix this?

    Video Streaming using AirPlay from iPhone(5s) to Apple TV only plays the sound.   The TV screen goes blank when I choose AirPlay but only the sound plays.   How can I fix this?

    Is this using a specific app or apps?  Not all apps support video out over AirPlay, the option is up to the app developer.

  • Having the same problem with my music videos streaming from the icloud.  Used to work fine.  Music streams OK

    My apple TV no longer will stream the music videos, especially when in shuffle mode.  Music is fine.  Music Videos from the computer library work just fine.
    All was well until about 3 weeks ago
    Appears from reading the different communites the problem is widespread
    Anyone found a solution
    I even purchased another Apple TV thinking the original may have been defective

    Welcome to the Apple Community.
    I believe you can only wait for Apple to resolve this issue.

  • Why is music streamed from my MacBook Pro to Apple TV via AirPlay choppy?

    I'm trying to stream music from iTunes on my MacBook Pro to my new Apple TV via AirPlay, but the music is extremely choppy, cutting in and out. It's completely unlistenable. However, I can use AirPlay to stream from my Macbook Pro to my Pioneer VSX 1021 AirPlay enabled receiver with no issues. Additionally, I can stream from my iPhone or iPad to the Apple TV without these issues. Therefore it would appear wifi bandwidth is not the root cause. I'm stumped. Help!

    Intermittent problems are often a result of interference. Interference can be caused by other networks in the neighbourhood or from household electrical items.
    You can download and install iStumbler (NetStumbler for windows users) to help you see which channels are used by neighbouring networks so that you can avoid them, but iStumbler will not see household items.
    Refer to your router manual for instructions on changing your wifi channel or adjusting your multicast rate.
    There are other types of problems that can affect networks, but this is by far the most common, hence worth mentioning first.

  • Do I have to change my IPhone 4S Name after restore backup from IPhone 3GS?Or is it irrevelant if two devices have the same name?

    Hey people,
    question above. I hope you can help me. I don´t want to crash my new 4S.
    Thanks.

    Thank you

  • Am unsuccessful getting my iMac iTunes library synced to my iPad and iPhone. all devices are authorized and have latest software. the device icon is not shown in my toolbar as the tutorial indicates. what next?

    can not get my iMac iTunes library synced to my iPad and iPhone using USB. all devices have latest software. There is no device icon on my IMAC toolbar as indicated it should be in the support FAQs. What advise does anyone have?

    Hello Luckyone1,
    Thanks for using Apple Support Communities.
    If your iOS devices are note being recognized in iTunes on your Mac, please follow the steps in the article linked to below.
    iOS: Device not recognized in iTunes for OS X - Apple Support
    Take care,
    Alex H.

  • Why is my ipad2 not buffering videos streaming from web as quickly as it can play them and keep making my videos stop playing?

    When I try watching videos streaming from itunes or u tube or any streaming source the ipad2 does not buffer the videos as fast as they are being played. This makes the videos stop playing within a few seconds after they start and I have to continuously hit the play button to watch videos in bits and pieces. This makes the streaming of videos on this device virtually impossible.

    You may be having some problem in your local network or your internet connection is not fast enough to properly stream the videos.
    What type of internet connection are you using (cable, DSL, etc?)
    What sort of local network do you have? router make/model, etc.
    What other traffic is on your network?

  • I tried to download picture/video files from iPhone 5S to MacBook Pro but it won't stop importing and I don't have phone connected.  I need to shut down the computer and I can't stop the import from spinning

    I tried to import picture/video files from iPhone 5S to MacBook Pro Aperature.  It appeared to be trying to download every picture I have ever taken even tho I checked do not import duplicates.  The phone is not connected to lap top.  It has been spinning for 1/2 day.  I can't stop it. I can't shut down the computer. How do I stop the import and shut computer down.

    Hey L. DENISE,
    I recommend that you use the following article to help you address this issue:
    OS X: How to quit an unresponsive application using Force Quit
    http://support.apple.com/kb/ht3411
    Thanks for being a part of the Apple Support Communities!
    Regards,
    Braden

  • Cannot see my picture stream on iPad with IOS 8.1.3. Pics from iPad are uploaded and visible on picture stream on iPhone 4, IOS 7. Is this a bug?

    I cannot see my picture stream on iPad with IOS 8.1.3. The pictures  from iPad are uploaded and visible on picture stream on iPhone 4, IOS 7. Is this a bug with IOS 8.1.3?

    Try:
    - Reset the iOS device. Nothing will be lost      
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    iOS: Troubleshooting Messages
      iOS: Troubleshooting FaceTime
    - Sign out and then sign back into Messages and FT. Note you will lose all messages presently on the iPod
    - Reset all settings                            
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                               
    iOS: Back up and restore your iOS device with iCloud or iTunes      
    - Restore to factory settings/new iOS device.                       

  • Adobeflash player ver. 11.8.800.94.0 keeps stopping and starting during video. How do I correct this

    The newly downloaded version of Adobe Flash player 11.8.800.94.0 keeps stopping and starting during video presentation.  I have to keep mouse cusor moving on the screen to prevent the video stopping. The previous version I had did not have this problem. Nothing else has changed on my system.  What is wrong here and how do I correct it?

    Uninstall your Shockwave plugin (from the Control Panel)
    Download and reinstall it: http://get.adobe.com/shockwave/

  • IPhoto 9.2 and video import from iPhone with iOS5.

    From the moment I have upgraded iPhoto 11 to version 9.2 and iPhone 4 to iOS5 I have this problem.
    While importing iPhoto show me in the new photo area all the new photo to import (correct) and all the video in the iPhone, either if they are still in the library!
    Looking for the mistake I find that the file in the library and the file on the iPhone have the same movie, the same name, the same size, but date & time different. It seems like the older iOS (or the older iPhoto as well) use the end of the movie for date & time while the new version use the start of the movie.
    Any suggestion?

    Option 1
    Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Rebuild iPhoto Library Database from automatic backup.
    If that fails:
    Option 2
    Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
    Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one. .
    Regards
    TD

  • IIS7 configuration, blocked broadcast video stream from third party host

    I have a client that recently replaced a windows server 2003 with windows server 2008 R2 as their webserver.  This was a big change to IIS7.  An application that I developed for them has stopped working and I believe this is related to the IIS7
    configuration.  The application uses SilverLight technology to display a broadcast video along with some powerpoint slides.
    Here is the URL going to the server from a link on an html page. 
    http://iiscast.wlf.org/vod/broadcast/sctr01/0/start.html?media=http://iiscast.wlf.org/vod/broadcast/unit2.asx
    The iiscast.wlf.org is the public name for the IIS server.  When we click on the link it does properly display the start.html content but fails to connect to the video stream.  The video stream is hosted by a third party and the contents of the
    unit2.asx file has the url for that video stream.  When a put the
    http://iiscast.wlf.org/vod/broadcast/unit2.asx portion in IE it does properly display the video stream on mediaplayer.   All this worked prior to moving to the new server.   When I use F12 in IE to debug this, I see a brief message appear
    in the debugger that it is opening unit2.asx.  After that the debugging is very limited except I know I’m getting an exception in the silverlight and the video doesn’t display.   Other similar Silverlight apps on the same server that display
    archived video are working.
    Here is the content of unit2.asx
    <asx version = "3.0">
      <Title>Unit2 Bdct</Title>
      <entry>
        <ref href = "http://easylink.playstream.com/winlive/wlforg2.wvx"/>
      </entry>
    </asx>
    Playstream is a video stream hosting company.  When someone links to them, it pulls the video stream from my clients media server broadcast point. 
    wlforg2.wvx contains the link back to the media server broadcast point at my client.
    We have a lot of connections going on but keeping in mind that  http://iiscast.wlf.org/vod/broadcast/unit2.asx will display the video and
    http://iiscast.wlf.org/vod/broadcast/sctr01/0/start.html?media=http://iiscast.wlf.org/vod/broadcast/unit2.asx
    Is not displaying the video although all this worked on the old server.
    My guess is that something in the IIS7 is blocking this process.
    FYI the old server completely died so I can’t look into its configuration which was done in 2004 by someone else.

    This was entered in the iis.net forum as suggested.  The problem has been resolved.  The hosting service determined they had an edge server that was faulting.  Their edge servers were automatically assigned by geography which meant
    that depending on how/where we accessed the system for troubleshooting we used a different edge server.  Hence some tests always failed and others always passed.  FYI the hosting service had this problem for over a month and did not detect it
    themselves.  Fortunately we connected with a dedicated service technician late on a Saturday night and he figured it out.  

Maybe you are looking for

  • Populating application item when updateable query report item is changed

    I have been looking at the help for cascading LOVs posted here. Unfortunately, I am not able to get it to work, and so am backing up with baby steps. I have a sql updateable report. It has a column (IN_STATE) that is a LOV sql query that pulls up a l

  • Multi Media Key Board

    The  multi media keys on my HP HID wireless Multi Media keyboard no longer work although the rest of the keys are O.K.. I think I did something wrong when I went into the 'properties' as I can no longer see the 'BUTTONS'  listed there. Can anybody he

  • How to identify a data reference

    Hi, Probably a very simple question, but i was not able to find the answer (yet). Hopefully you can help me. I have a data reference, which is a TYPE REF TO data In some cases the reference can point to a table and in the other cases it points to a s

  • Fade In/Out not working

    Hi Applying Fade Ins or Outs seemed to have stopped working. Using either the crossfade tool or specifying them in the Inspector, they appear graphically correct, but audio-wise, no fade. Crossfading between regions is working fine. Using ordinary un

  • Print with HP laserjet CP 1025 color and Mac Lion 10.7.3

    I have an HP laserjet CP1025 color and I am trying to print with Mac Book Pro 10.7.3. I updated the printer firmware to LJCP1020_FWupdate and also update my laptop with HPPrintersDrivers2.8 Still I dont know how to print. The printer doesnot appear a