Storage bin 916 0085192173 is currently blocked

Dear All
I Save VT02 (shipment), I have error message "Storage bin 916 0085192173 is currently blocked"
Please help me
thanks
imron
Edited by: Muhammad Nur Imron on Sep 30, 2010 5:34 AM

This error appears from the warehouse associated with the plant.
storage type 916 is for outbound dispatch and the bin 085192173 is the associated delivery number. There seems to be some problem in the storage type (negative stock, perhaps)
I assume you are creating the shipment for a delivery that has not been PGI'ed yet.
Please check that there are no open transfer orders linked to the storage bin (use LT04 to identify open TOs). If there are, then confirm them using LT12.
Normally the storage bin should not exist after PGI is done. If it exists, please check the stock position of the storage bin (use  LS03N for this).
All the best!
Regards,
Aroop

Similar Messages

  • Storage Bin Blocked

    Hi ,
    I am trying to do a transfer posting with 311 from Storage location to Storage location. One sloc is warehouse managed and the other one is not warehouse managed. When i am doing that it is giving me an Hardstop error message " Storage Bin 000 Example is currently blocked".
    Please advice what needs to be done on this issue. 
    Thanks,
    Saakithyan.

    Go to LS03N transaction check in static tab transfer order.If it is open then confirm the transfer order.It seems open TO stopping you transfer the material .

  • Inspection lot creation on storage bin

    Hello all,
    I am wanting to learn how to create an inpection lot of stock within a storage bin.
    I ask because we have many storage bins in our warehouse location storing the same material.
    If I do a MIGO 322 transaction in inspection lot there is no where to specify bin location, it looks at the warehouse as 1 storage location.
    In the lower half of the migo screen there is a 'storage bin' section but it is blocked out and I cannot identify which storage bin I am wanting to inspect within that storage location.
    I know I can create a transfer through LT01 however this still doesn't appear in QA32 inspection lots.
    I want the bin location to stay in the same storage location but be flagged for quality inspection.
    Thanks,
    Chris
    Edited by: gmanwizo on May 7, 2011 5:58 AM

    Hi,
    It seems you have both MM and WM activated. You have to assign storage locations to warehouse numbers in customizing, definition of organization step. Then when you do a 322, transfer requirements will be created by the system and you can transfer the material to a storage bin by turning the requirement into a transfer order. Assignment of new storage locations to warehouses may be tricky, you better ask for consulting on this matter.

  • How to Unblock a Storage Bin With an Inventory Active Flag

    Hi,
    I have a storage bin that shows as being blocked by an Inventory active flag, but the inventory document has been canceled. I can't even view this document since it was canceled. Anyone have any suggestions?
    Thanks,
    Das.

    Hi,
    You should be able to click on the bin master data (click on bin # and go to inventory tab) and take the recent inventory doc # then go to li02 and delete the inv. doc. That will solve your problem.
    You could also try LX22: Edit > Deactivate.
    Reward points if found helpfull..
    Cheers,
    Chandra Sekhar.

  • Putaway Block in Storage Bin for any specific Material Code

    Hi Experts,
    We have a problem, we have allowed mix storage, addition to stock in the storage type, our requirement is this, that we want to block one bin aa-01-01 for some specific material code xxxxx, but we want to allow putaway other material codes to that bin.
    How can we achieve this. Can we use LS07 or some other solution. Please suggest at the earliest.
    Regards
    Ishu

    Hi,
    In standard system, you can block one specific bin for the specific material with Putaway strategy "Fixed bin" by maintaining this bin in material master. It is unclear that you set "allowed mix storage" and again required material specific putaway in bin.
    You can change "Mixed storage" indicator to blank. Which explains "___"  Mixed storage is not allowed
           All storage units in a storage bin must contain the same material and batch (one quant).
    If you don't want to change any of current setting you'll need to use the user exit and maintain custom table where you can maintain specific bin for the material for the warehouse. After determination of the bin to putaway in the standard code you can check if it is conflicting to the entry in your custom table.
    Hope this'll help.
    Regards,
    Sudhir

  • Blocking Storage Bin

    Hi experts,
    I have question about following situation.
    I storage goods in more than one storage bin. My storage strategy find storage bin automaticly. If the first storage bin full, strategy find second storage bin. I want that, system block the first storage bin automaticly till the first storage bin will be empty. System doesnt allow add new goods that quant.
    how can i do that?
    Thank your support.

    Hi Manish,
    I explain what i need with example;
    I have 2 storage bin for my material. All this bin's capacity is 5 pcs. Now first good issue with PO about 5 pcs. this material putaway first bin. then other good issue 3 pcs. This material putaway 2nd bin. Then i remove material 3 pcs in 1st bin. As a result, i have 2 pcs material 1st bin and 3 pcs material seceond bin. My capacity is 3 pcs 1st bin and 2pcs 2nd bin.
    Now, if there is good issue same material, system doesn't allow putaway this materials to 1st bin. System block this 1st bin automaticlly. This block is automatically deleted after the last storage unit has been removed from stock (picked from the row).
    By the way, am i need batch management to implement this strategy for this material?
    Thanks for advice..

  • Inventory block is active in storage bin altough there is no open inventory

    Hello,
    We're using continuous inventory method in our warehouse. Sometimes, we see that inventory block is active in a storage bin, altough the all inventory documents regarding this bin are cleared and there is no open inventory document for the related bin. Do you have an idea how could this happen ?
    Thanks in advance...

    Hi,
    This kind of issues occurs due to some inconsistencies during the processing of inventory processes.
    I request you to check all the tables regarding the inventory statuses for LINK, LINV, LINP etc.
    Also please check whether the quant also is cleared correctly in the table LQUA.
    If only the LAGP-SKZSI is active. Then you have to remove this flag manually in debugging via SE16 for this field.
    Kind Regards,
    ALV Ramana

  • WM -Storage bin 3000711133 ( nothing but TO no)  blocked for stock removal

    Dear Friends,
    1.User has created TO for 2 qty.
    2.While confirming it , he has put 1 qty in qty diff - could be by mistake,
    3.Now this one qty is went to stock differnece - Storage type 999 and the storage bin as "TO" number.
    4.I suggested them to clear the differnces through LI21 , but they dont want to do it , as it will heat financial accounts too.
    5.They want to transfer this one qty from 999 storage type to the required storage type
    6.I tried with LT01 - user mvt type 999 , & also 201 , and used souce storage type as 999 and storage bin as TO no, but i am getting message -Storage bin 3000711133 ( this is nothing but TO no)  blocked for stock removals
    7.even i tried with LT09 - but it dosent work...
    It should allow to move the material from 999 through lt01 , in our case it is not allowing, could you please help me to resolve this issue, if i need to do some customisation changes then where i have to do?
    Thanks & Appreciates your earlier response.

    Hello Om,
    I request few corrections for my last post.
    As understood now, you picked quantity was 2 pcs , while confirming user has mistakenly put 1 pc in qty difference field.
    Here when user has entered 1 (reduced quantity that the delivery quantity in outbound delivery) then he has to enter difference indicator for reduced quantity which must have been configured in the system.
    Now say that you have deliver the 1 pc which was confimred in TO to customer, at the same time your delivery must ahve been updated with pick and pack quantity as 1.
    But still 1 qty lies in interim storage type (XXX) with stoareg bin as trsnfer order number.
    Now to put this stock back in original stoarge type and bin.
    You please try LT01 with movement type as 999 which is warehouse supervision.
    Now in next screen you enter the stoare type (XXX) and stoareg bin i.e. your transfer order number in source data
    and destination storage type and bin will be automatically picked.
    Now Press Enter . 'You will get warning message as check you entries' ignore that message and save
    Hope this will help you. Also if you are getting any erro message with above please give us the detailed escription of erro message
    Br,
    Tushar

  • How to block storage bin transfer

    Dear experts,
    I have an issue. Fo example, a material is already been flagged for deletion. All transfer from plant level up to storage location is already blocked. But I can still do bin transfer using LT01. Can we block LT01 as well?
    Please advise.
    Best Regards,
    Hasniza

    Hi
    In that case if the storage bin is getting blocked then it will affect the postings of other materials , so better to go with material level
    Do one cycle in your development/quality server and ensure that it is working fine as per the clients requirement, take care of other exceptional scenarios also if any.
    Regards
    Amuthan M

  • WMS: Config to block an occupied storage bin

    Dear All,
    I have got a user requirement where by upon stock placement, system should always propose the next empty bin available.
    Besides that, a block should be applied on that bin immediately once stock placement is done. The block is to ensure, no further stock placement can be done into the storage bin, even though there is space available. It should not prevent picking.
    The block should be removed, when the storage bin is empty.
    From the above requirement, the stock placement strategy should be - Next Empty bin (L).
    What about the blocking mechanism ? Is there any config that will acheive the requirement above.
    Yes - at the storage type definition, there is a config called "block upon stock placement". However the block is only activated during stock placement. Once the TO is confirmed, the blocking is removed.
    Appreciate if anyone out there could share their experience.
    Thanks in advance.

    You can use the Capacity check method on the storage type.
    2     Check based on palletization accord. to SUT 1
    Maintain the Storage Unit type 1 in the material master and upon received, it will block.
    Or
    You can use the remaining capacity based on your process.

  • Re: Materials stuck in Storage Type 916

    Hi all,
    I am having a situation which I am unable to figure out the cause.
    In our current environment, we have implemented SAP WM.
    Now in a normal Sales cycle (Sales Order > Delivery > Invoice), a WM TO is required to do the Picking after a Delivery Document is created.
    When a WM TO is created it picks up the stock from a Fixed bin & Storage type XYZ (based on the search strategy) & then puts it into the Storage Type 916 & Storage Bin= Delivery Document Number.
    Once the Delivery is shipped (PGI) then this stock is removed from Storage type 916. This works fine.
    However there are many deliveries which have been shipped in the system, but the stock for that material is still in 916 storage type. I am unable to understand how to go about this situation.
    Kindly guide me through the initial probe for this situation.
    Thanks
    Vinit

    Hi
    I have checked all the status.
    The Goods Movement status of the delivery is C
    Also the delivery has been invoiced.
    When I analysed the same in LT22
    TO#       Item    Material  Stor. Typ  Source Bin   Qty Unit   Plnt           Created On         Typ   Dest. Bin        Dest.target qty   
    159173   0001  Material#    009        MTS01        1    EA      US89        10/07/2009        916  0080080207             1
    168198   0001  Material#    916   0080080207    1    EA      US89         10/07/2009       009   MTS01                     1
    180051   0001  Material#    009       MTS01         1    EA      US89         10/12/2009        916 0080080207              1
    Now the 1st entry is of the WM TO when the Delivery Picking takes place.
    Then the remaining 2 TO are created by some business user using Movement type 999.
    Hence I am not sure if a transaction has triggerred it or has he done it on purpose.
    My final objective is to have this stock hanging in storage type 916 - Dyanamic bin, to move out of the system as the delivery is already shipped.
    Can anyone guide me so as to how can I acheive the same effect to the system as that of movement type 601.
    Thanks

  • Picking from another storage bin

    During picking TO creation the system automatically determines the source storage bin from where the materials should be picked. Lets say the items to be picked are not there and cannot be picked. In this case the operator should be enabled to pick from another storage bin, however the system does not allow this. (This is via mobile data entry and in a bulk SU manages st. type).
    Is there a way to allow picking from another storage bin? If not, can the TO be created without any source determination? Even if I switch off picking strategy, the system expects entry of source bin at TO creation.

    Hi,
      With out a source storage bin , pick TO cannot be created currently. If at all you want a different source bin, you have to cancel the TO, block the current bin and then recreate the TO. That is an exceptional case and should be handled inside the system.
    Thanks
    Vinod.

  • How to remove storage bin stock

    our current client wants to empty out stock from storage bin. In inventory management there is no stock exist in storage location, but it is there in storage bin.
    Pls suggest ASAP

    Hey,
    Have a look at LX23 .. might be able to help ?!
    thanks,
    A
    Short text
    Stock Comparison Inventory Management / Warehouse Management
    Description
    Using this report you can generate an inventory comparison between the IM System (Inventory Management) and the WM System (Warehouse Management).
    On the selection screen, you can limit the area for comparison by entering the plant / storage location, plant / warehouse number or only the warehouse number.
    In addition to specifying the area, you can also determine the extent of information to be issued.  Here you have three options:
    1. "With bin inventory"
    In addition to generating the corresponding stock figures, you can also have a list of the corresponding WM bin quantities included.
    2. "All data on material"
    Even if only one difference occurs in one of the listed combinatations of material / batch / special stock indicator / supplier, all material combinations are listed. This can be very helpful when searching for errors.
    3. "Clear differences"
    If you mark this field, the system will generate a batch input session. By starting the batch input session, the differences to be cleared are removed in the IM system.  Negative WM stock figures and stock differences in returns will not be cleared.
    If you want to have a batch input file generated for the purpose of clearing the differences, it is important, for consistency reasons, that the materials in the respective warehouse are blocked in order that postings affecting stock figures can be prevented.
    CAREFUL: If you generate this session, all the material stocks belonging to the respective warehouse number are blocked completely, that is, for the duration of the program, no postings affecting the stock in the warehouse will be possible!
    Prerequisites
    The comparison is also possible for warehosue numbers managed on a decentralized basis.
    Output
    You receive a list with various materials. The list contains the following information, for example:
    The first line contains the plant, storage location, warehouse number, material number, total stock in inventory management, total stock in the warehouse, and the difference between the stocks.
    The following line contains the first combination of batch / special stock indicator / supplier (or sales document and item number for sales order stock) and stock category (Q,R,S, ), the stock figures in Inventory Management, in Warehouse Management, and the difference.
    If a batch input session is to be generated, the list contains a note in the log as to whether or not a session has been generated or behind the pushbutton "non-postable stocks", which materials could not be cleared because of negative stock figures or because they belong to returns stock.

  • Wide materials in storage bins how to configure?

    Hi experts,
    98% of the time I am dealing with the classic 1 pallet per storage bin sceanrio so I have my storage bins set up A001A, A001B, A001C, A001D and so on....and this works great.
    However, every so often I get a really wide item in such as a sofa which would take up A001A, A002A and A003A. This would then mean that storage bins A001A, A002A, A003A are no longer available for putaway.
    The simplest solution would be to have 1 storage bin A001A that was wide enough to store the sofa and forego A002A and A003A. The problem, as I see it is that I would be doing that for only 2% of the time, also the labels A002A and A003A would be above the storage bins so it may be confusing. 98% of the time I would benefit from having A001A. A002A and A003A defined as seperate storage bins.
    What would be the best set-up to deal with this situation?
    Thanks in advance for your help
    John

    Your current set up seems pretty OK ,  considering you get the Big sofas only 2% of the times.  
    Are the 3 Bins actually just 3 logical partitions of a larger  space?   If such is the case and the volume  of transactions is low,  then you can Putaway the Sofa in A001A  and   at the same Time Put a Manual Posting block on the other 2 Bins by LS06  (you may try and automate this blocking by  user exit) .  when the Sofa is issued, remove the blocks on the 2 other bins.  this is just a suggestion, you may find better solutions in the WM forum.

  • Storage bin Capacity utilization is greater than 100%

    Hi,
    Via LS03N, I can found that some capacity utilization is greater than 100%, this must be incorrect, what's the reason? is there any report to update the capacity utilization for storage bin?
    Kindly please advise.
    Thanks

    For the capacity checks, the remaining capacities or the used weight in the storage bin master data are updated with every putaway or picking. If you change the inspection method in the current operations or you change capacity or weight data of materials or storage unit types, you then need to make a comparison of the data. You can make this comparison with report RLS10200. First read the documentation before you start the report.

Maybe you are looking for

  • Iphone pre-order exchange

    So I was one of the first people to order the white 32gb model at my local best buy. Later on throughout the day I was reading numerous reports about the white iphone not being available so I went back and changed my order to black. The way the best

  • TABLE OF VARCHAR2(500) problem

    Hi All I'm developing a web app using jdeveloper 11.1.2. I have created a TABLE OF VARCHAR2(500) variable in the databse. (CREATE OR REPLACE TYPE TRADE_EXCEPTIONS_TAB IS TABLE OF VARCHAR2(500); ) when I run the project using IDE this array returns va

  • HTML5 export

    Hi there, We've got an question regarding Indesign CS6 an the ability to export your interactive document to HTML5 through the 'Preview HTML5 in Browser' option. In the following video you'll clearly see this option although it isn't available in Ind

  • 'friendship' movie trailor keeps crashing iMovie - any ideas why???

    I have iMovie '11 and for some reason, whenever I'm in the friendship themed movie trailor, it keeps freezing iMovie.  I'm almost done with it; I've imported all my video clips and just need the last text slide to be edited and yet, I can't seem to k

  • How to start up my laptop that don't to start up

    i want to start up my windows 7 laptop and recover all files but its not starting up , any time i try to start it up the screen became white and then do the same thing over and over . my question is how to get my laptop start and gainig back all my f