Storage bin Linkage

Hi,
We had done posting and valid documents are available and we can see the document showing the storage bin.
For a material , storage location can u please share the associated tables link or logic to get the data for pick the storage bin in out put report?
Regards,

Hi Mahesh,
You can link MARC & T001L on WERKS(Plant) to get Material & Storage location.
<b>Reward Points if this helps,</b>
Satish

Similar Messages

  • Linkage between plant and storage bin..

    Dear SAP GURUS,
    I need a calirification , I have 2 plants which we assigned to single warehouse no , now i how i create bins i have to create seperate bins for each plant .  bcs one plant is phycisal plant other one logical plant   .pls help me out.
    where we will link plant with storage bin
    Rgds Madhu

    Hi,
    Basically you assign warehouse to Plant & storage location in Enterprise structure-Assignment-LE-Assign WH number to Plant & storage location
    Under warehouse you will have storage types & under storage types you will have storage bins.
    Bins will be created under storage types & not under plant.Warehouse & storage types will represent for both plants. No separate bins are created for plants.
    Hope you got the answer.
    Regards,
    Prashant

  • Report for Material - Storage Location - Storage Bin

    All SAP Gurus,
    Is there any standard report available in which we can find out the storage bins for list of materials?
    (We have not implimented Warehouse MAnagement)
    Regards,

    HI,
    You need to have Warehouse management in place in order to view the storage bins for materials,
    MMBE of MM cannot give you the idea of storage bins.
    Hope this helps.
    Regards,
    Prasanna
    Award pls if helpful.

  • Storage bin Capacity utilization is greater than 100%

    Hi,
    Via LS03N, I can found that some capacity utilization is greater than 100%, this must be incorrect, what's the reason? is there any report to update the capacity utilization for storage bin?
    Kindly please advise.
    Thanks

    For the capacity checks, the remaining capacities or the used weight in the storage bin master data are updated with every putaway or picking. If you change the inspection method in the current operations or you change capacity or weight data of materials or storage unit types, you then need to make a comparison of the data. You can make this comparison with report RLS10200. First read the documentation before you start the report.

  • Not Printing the source storage bin in the layout

    Hi Gurus
    As i am printing the layout to pick the goods for delivery, in which iam not getting the source storage bin for some deliveries only. sometimes its picking and some times not, what has been the reason behind it. i have take the help of an Ababper to check the conditions if any for that filed. but i cannot find any.
    Please help me,
    Thanks in advance,

    sorted out by setting the SPAD - Device types
    format, just added the zxxx format to this and now it is working

  • T.code for viewing stock at storage bin

    Hi all,
    What is the t. code used for viewing the stock at storge bin?I know this is WM question but your help is appreciated.
    Regards,
    Shailendra

    Hi,
    Following are the T-Codes:
    LS26   Warehouse stocks per material
    LI05    Inventory History for Storage Bin
    LX02   Stock List
    LX03   Bin Status Report
    MB52  List fo warehouse stocks on hand
    Regards,
    Suresh' D.

  • Cancel (reverse) Return Order, PGR not possible due to storage bin in 904

    Hi gurus hope someone can explain in detail with transaction what am I missing since I'm MM guy and dont know very well SD transactions but here's my scenario,
    There is a return order with a delivery (1110500002), then PGI (651), this drive me to process a Tansfer Req to move it from 904 to 010 storage type, and then do the billing, up to here the process is going well.
    The problem comes when trying to reverse the above described process, I start with reverse the bill sith VF11 and then try to cancel the PGI ( PGR) with VL09 but system says "Storage bin 001  904  1110500002  does not exist (Check your entry)"
    This is why I'm trying to fix the issue as MM guy, but I don't know why the error comes, this bins in 904 should be dynamic and create temporaly the bin 1110500002 which is the delivery that was created when the first return order was created.
    I dont know if this error is related to MM movement types or to some config at the delivery type, o maybe the process we are following is not the correct for this because in transaction OMLR for IM 651 there is WM 651 but for 652 IM it's WM counter part is the general GI 255 mvt type so
    Just to mention what I think that need to happen for the reverse of the return process is to cancel the bill then cancel the delivery and at this point negative stock should come into 904 bin 1110500002 and the creation of a TR to move from 010 to 904 after doing this TO then stock in 904 will be zero.
    Please advise on how this process should happen.
    Regards.

    Hi TQ,
    Thanks for your reply, but I didn't understand what you mean with compare material master, compare it with what? And also I am not really sure that this could be the problem because I have this issue only when reversing the return, this means when I do the return the stock actually goes to 904 1110500002 so this means that the material has mantained correctly WM views in the material master.
    Can you elaborate more in detail how you solved your error few months ago?
    Thanks and regards

  • Creation of New storage bins for storage type 007 in Production

    Hi Gurus,
    Coudl you please give me a clairty, storage bins can transport from Qaulity or we have to create seperately from server to server like Qulity and production.
    thx
    r

    Hello,
    As correctly mentioned storage bins never transported from one environment to other. You have to create through LS10 or LS01N.
    The bin structure can get transposted from one environment to other & then you can open the structure & create bins in numbers.The bin structure can be seen through LS10 & created through same transaction.
    Regards,
    Prashant

  • Inspection lot creation on storage bin

    Hello all,
    I am wanting to learn how to create an inpection lot of stock within a storage bin.
    I ask because we have many storage bins in our warehouse location storing the same material.
    If I do a MIGO 322 transaction in inspection lot there is no where to specify bin location, it looks at the warehouse as 1 storage location.
    In the lower half of the migo screen there is a 'storage bin' section but it is blocked out and I cannot identify which storage bin I am wanting to inspect within that storage location.
    I know I can create a transfer through LT01 however this still doesn't appear in QA32 inspection lots.
    I want the bin location to stay in the same storage location but be flagged for quality inspection.
    Thanks,
    Chris
    Edited by: gmanwizo on May 7, 2011 5:58 AM

    Hi,
    It seems you have both MM and WM activated. You have to assign storage locations to warehouse numbers in customizing, definition of organization step. Then when you do a 322, transfer requirements will be created by the system and you can transfer the material to a storage bin by turning the requirement into a transfer order. Assignment of new storage locations to warehouses may be tricky, you better ask for consulting on this matter.

  • Serial Numbers in A Storage Bin

    Dear all,
    In warehouse management we have serial numbers attached to each item in the warehouse and these items are batch managed. During goods receipt serial numbers are scanned using RF scanner and a transfer order is created for each item. We have a customer table to store the details like storage location and storage bin etc when they are first scanned in. There is no problem here.
    If items are transferred from one storage bin to another using a transfer order, system is picking the serial numbers required for the transfer order posting. When corresposing material document is displayed using MB51, there is a tab for serial numbers that are included in this material document.
    Is there any way to get all the serial numbers of the items stored at Storage Bin level?
    Thanks and regards
    Raj

    Hi Christian,
    Thanks for the reply.
    In the mean time I was talking some more people here regarding this problem. Looks like there is no one obvious place where equipment serial numbers are stored.
    Further digging in to SAP I could make out that the serial numbers get distributed to tables SER01 to SER07 based on the activity performed with key in OBJK. I think I will be able to get there.
    I appreciate your time and reply.
    Regards
    Raj

  • Reg:creation of storage bin

    hi,
    i have created storage bin already with two or three coordinates, i  have some  requirement that it is possible to create six coordinate bin. if so then what is the possible standard template for that, and how much we can extend the coordinates. 
    Regards
    Muthuraman.D

    Give examples of the two or three co-ordinates and what you want to extend?

  • More than one Quant in a Storage bin section (Strategy P)

    Dear all,
    We have a Storage type with Putaway strategy P, the SUT check active but no SU Management active, Mixed storage = X and Addition to stock = X.
    For this Storage type, our Storage bin type and SUT we have set up in customizing a Bin sectioning 3 meaning the Storage bin is divided into 3 sections so a maximum of 3 Quants per Storage bin. Note that other Bin sectionings have also been set up.
    During testing I found out a Storage bin section can only contain one Quant at a time.
    Because of Addition to stock = X we can add more quantities of the same Material/Batch to a Storage bin secion that already contains stock of this particular Material/Batch.
    If I try to add a Material/Batch to a Storage bin section that already contains stock of another Material/Batch (so, a different Quant), the system gives me an error:
    Bin item X in storage bin Y already occupied
    Message no. L3063
    Now physically for the mentioned SUT our Storage bin is divided into 3 Storage bin sections/pallet places and on a pallet it should be allowed to put multiple Materials/Batches at a time, that is why we set Mixed storage = X in customizing.
    Now we can only put one Quant (so one Material/Batch) in a Storage bin section at a time;
    We want to be able to put more Quants into a Storage bin section at a time.
    How can we achieve this?
    Note we rather donu2019t want to use Storage Unit Management.
    Thanks for any clues!
    Kind regards,
    Bart

    Hi Bart,
      As a thumb rule you cannot have one quant with multiple Materials. Ofcourse you can keep on adding same material /batch is the same quant i.e. in the same Bin section where you already put the material.
    Quick win for your case is Increase the number of quants allowed say 15. In this case you can keep on storing different material / batches on the same pallet but system will keep on generating sections.
      At any point of time you can easily track how many quants (Mat + quantity)  are stored in that Bin & relevant section.
      For strategy P , SUT check must be activated you cannot skip it.
    If Business is not ready to work with more number of sections , you can always think of mapping another startegy ..you could do more test with Bulk Storage.
      To my knowledge Strategy I i.e. Addition to existing stock with Mixed storage Indicator will work very well here.
      You just need to map appropriate Capacity check as startegy I goes with active capacity.
    Thanks,
    Mahesh

  • Report to see the value of material at storage bin level

    Hi,
    The requirement is to see the quantity and value of material stored at storage bin level.
    Is there any standard report available to see the same.
    thanks

    Hi,
    Check on it:-
    Storage bin should display in MB52
    pherasath

  • Report by Storage Bin

    Hello,
    I uses the Inventory Module not WM.   In the Material Master Record specifically at Plant Data / Storage 1 view, my client used the storage bin field to specify where the material will be storage.
    I need to know if exists a report to display the Warehouse by storage bin.
    I appreciate any help.
    Regards,
    Hector

    Dear,
    As far as I know not possible.
    We developed Z report for similar requirement.
    This storage bin is only significant if you do not use SAP warehouse management. It appears on goods receipt/issue slips.
    Regards,
    Syed Hussain.

  • Report on Stock in storage bin

    Dear Guru
    My client wants a report where in MF60 they will get the required quantity to be transferred from raw storage location  to production location.They want a report in which the stock to be transferred  from raw storage location is in which storage bin.
    Is there any standard report for this
    regards
    sam

    Hi,
    You can also use this report : LS26 to get an overview display per material.
    Or you can use LS03n per WM,storage stpe, storage bin to get history.
    Thanks
    Silas

Maybe you are looking for