Storage class not allowed in storage type
Hi All,
I am getting this error while confirming the TO.
It stays Storage class is not allowed in Storage type but how can this be configured in OMM2.
or do we need to define any sequence in OMLY.
Hi
Have u defined your material as Hazardous material? is so, yes, u have to do settings in OMLY.
"Storage class: Classifies hazardous materials with regard to their storage conditions. A check can be carried out to find out whether hazardous materials that belong to a specific storage class may be placed into a particular storage type".
Rgds
Ramesh
Similar Messages
-
Storage bin not found (enter storage type) L3398
Hi,
We have an very critical issue. We have gone live on 14th , only one day before. Now our system is showing the message
"Storage bin not found (enter storage type) L3398.""
We have defined Open storage type in our system where , mix storage is allowed. There are 10 bins in this storage type. There is not capacity check for these bins. Now system is not searching bin from Open storage and we have stucked with TO creation. System is not allowing us to created any TO.
KIndly do the help
I will be very thankful if reply fast.
Regards,
Manish IHi MANISH,
Though there exists many storage bins , the system is not able to find these bins because proper storage unit type is not defined.
System identifies the destination based on the following criteria :
Activate Storage Type Search
Activate Storage Section Search
Activate Storage Bin Type Search
Go through the below customising for better understanding :
SPROLogistics ExecutionWarehouse Management--Strategies
Maintain the Warehouse Management 2 view of Material master with Palletization data .
Thanks,
Swamy H P -
*IT 0017 Error Combination of vehicle type & class not allowed*
Hi
I jus have moved my config from developement to quality. Here when i m trying to save IT 0017 Travel Privilege m gettin this error as Combination of vehicle type & class not allowed for reimbursment. Cause of that m nto able to save this infotype.
I checked my config in both client its same but onlt in quality m not able to save this IT. I checked whole cycle in Development its workin properly there.
Thanks in advance.
NehaHi
in my case it ws tranport request prob. Request was not getting transported properly. so i opened th client n created table entries for vehicle. U also once again check those vehicle type tables again. M sure that table entries are missing so its givin that error.
Regards
Neha -
When you purchase extra cloud storage, does that allow more storage for music, apps, and so forth to be downloaded?
So only documents? it doesnt store pictures, videos, or any of that stuff? or it doesnt store settings to your applications? I just want to know how exactly iCloud can effectively help me with storage because I only have a 16 gb ipod 4s. I have already decided I will not download any music onto it or videos
-
When i try to download an update from the appstore the dropdown menju automatically inserts my apple id (which is wrong). It's in gray and will not allow me to type in the correct id. How do i stop the auto insert so that i can enter the correct id?
the original apple id was entered incorrectly. Apple says it must be a email address. My email address is correct but the letter ( t ) somehow got added to the (.com) so that when i try to enter my id it is automaticly loaded with the email address the ends ( .comt ) . According to Apple this is not a "legal" email id. But it appears on my dropdown in gray and i cannot alter it or delete it, thus preventing me from downloading software updates.
-
Set type COMM_PR_UNIT is not allowed for product type
Hello all, I am working in SRM 7.0 and when I try to replicate service master (DNL_CUST_SRVMAS) I have this error:
Set type COMM_PR_UNIT is not allowed for product type
What can I do? I think that is an ABAP problem
Thanks in advance
Rosa RodríguezRosa,
This note is something different and nothing to do with the issue. Can you share how did you resolve the DNL_CUST_SRVMAS issue? We are also getting same error.
Thanks,
Jagadish -
Value 'defaultNs:AddBP2Type' is not allowed for attribute 'type'
Hi All,
I created the wsdl for mobile and I tried to send a SOAP request from Altova XMLSpy. However when I geive the wsdl in 'wsdl file location' I receive the following.
File http://127.0.0.1:8080/B1iXcellerator/exec/dummy/com.sap.b1i.vplatform.scenarios.setup/vPac.sap.B1Mobile/001sap0003_sap.B1Mobile.wsdl is not valid.
Invalid XML schema: 'Value 'defaultNs:AddBP2Type' is not allowed for attribute 'type'.'
Error location: wsdl:definitions / wsdl:types / xs:schema / xs:element / @type
Any Idea?
VangelisHi,
it seems that Altove did not cope with defaultNs prefix that is used for marking default namespace.
just look up in your <xs:schema > tag what namespace prefix is used for your namespace - you shall find there something like this
<xs:schema xmlns:ns0="your.namespace.com" xmlns:xs="http://www.w3.org/2001/XMLSchema" elementFormDefault="qualified"
and replace prefix defaultNs with prefix of your namespace (in example above it would be ns0)
There might be several usages of defalutNs iside of WSDL (at least in my case were two) so replace it everywhere using same approach
Best regards, Artem -
Transaction CLM1 not allowed for notification type QL
Hello guys,
one of our user try to open the transaction CLM1/CLM2/CLM3 he getting error message Transaction CLM1 not allowed for notification type QL
please any one give solution for this issue.
find the error screen shot for your reference.
Thanks
SuryaHello Surya,
Have you done Basic configuration for Claims processing in SAP Project System.
SPRO > Project System > Claim > Notification - Claim > Notification creation
Also check config for Settings for Claims.
Refer sap help for more details
SAP Library - Claim Management
Regards
Tushar -
Transaction QM03 not allowed for notification type MQ
HI Dears,
The following error is appearing when i want to view my notification created through defects
Transaction QM03 not allowed for notification type MQ
How to rectify it ?
AlagesanHi,
Check IQS3 transaction also....
Cheers,
Tushar -
My typing cursor frequently goes crazy, not allowing me to type and jumping from place to place, deleting letters. Suddenly, a line I have typed will be highlighted and deleted at will. Also, mouse cursor moves at will, opening multiple pages in seconds. Help! What could be causing this, and how can I stop it?
I've had my Macbook pro for over a year and it has never done this before. Restarting the computer fixes the problem temporarily.My first thought was the hard drive and OS has a built in Sudden Motion Sensor whcih will stop the hard drive heads from crashing into the platters when the computer is moved suddenly. This does work most of the time and could cause some of the tings you are seeing.
But then after reading more of your first post it seems your system and drive is doing some very strange things.
It would be best to first take it into an Apple Genius Bar and have it looked at. They can run tests on it and since it is still in the original 1 year warranty this should not cost you anything even if something needs to be replaced.
You can also run the Apple Hardware Test on it your self by connecting it to the Net by Ethernet cable and booting holding down the d key or the Command+d keys. That will boot the computer from the Apple internet servers and load the AHT.
Good Luck. -
if i purchase an app today can i download it on my ipad next week when i buy the ipad.....also i noticed on another purchase attempt the site would not allow me to type in my 3 digit security code? what next??
Saw this on another post.
Applecare Senior Advisor Txx Bxxx (I have his contact info in an email he just sent) just confirmed with me that the problem people are having with the App Store not loading is an apple issue with there servers, ITS NOT YOUR IPAD so don't go restoring it! It's not happening to everyone however but they are looking into it, its really hit or miss.
In the meantime ...........
The Complete Guide to Using the iTunes Store
http://www.ilounge.com/index.php/articles/comments/the-complete-guide-to-using-t he-itunes-store/
Can't connect to the iTunes Store
http://support.apple.com/kb/TS1368
iTunes: Advanced iTunes Store troubleshooting
http://support.apple.com/kb/TS3297
Best Fixes for ‘Cannot Connect to iTunes Store’ Errors
http://ipadinsight.com/ipad-tips-tricks/best-fixes-for-cannot-connect-to-itunes- store-errors/
Try this first - Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
This works for some users. Not sure why.
Go to Settings>General>Date and Time> Set Automatically>Off. Set the date ahead by about a year.Then see if you can connect to the store.
Cheers, Tom -
when using more than one tab, once I have opened a .pdf using firefox my laptop will not allow me to type or click in another tab unless I drag the .pdf into it's own window? not a major problem just irritating.
I found the cause but no solution, it's actually a plugin that does that: divx plus weblpayer (it gets installed when you install DivX on your system), if you disable it and restart firefox it all works again. But I want that plugin... so DivX need to fix this, unless it is a Firefox bug in its own core... anyway these two together creates the problem.
(I'm running Firefox 9.x on OSX Lion)
I also wish firefox tab tear out tab worked more like chrome's tab tear out, much friendlier... -
My MacbookPro will not allow me to type in the password to open the computer, the keys make a donging noise when I try to use them ?
If the normal restart doesn't work, and you restart on the recovery hard drive, from the choices of things to do window that appears, select Terminal, and in the Terminal window type: resetpassword and then press enter. You will have a window with the users to choose from to reset the password. Select the one you want and you will be able to reset the password, double entry of course.
-
Status profile not allowed for object type
hi
i had created a status profile (for having 2 statuses before production order release) and assigned in the order type.
but while creating the production order i receive the following error.
Message no - CO622
status profile not allowed for object type
please provide your inputs
regards
RameshRamesh,
once you cerate a Status profile in BS02 and add status to the same. in the tollbar you will see OBJECT TYPE push button, select teh obejcts like PP/PM order header / operation /comepeoent and PRT ect where that staus can be applied.
Then assign the statsu profile to order type. -
Requisition doc. type RV not allowed with doc. type
Using the tcode ME51n, I created an Outline agreement(Doc type RV) and when i go to ME31K to create a contract and select With Ref to Purchase requisition and enter the Purchase requisition #, I get the error message Requisition doc. type RV not allowed with doc. type.
I tried changing the settings for doc types for contract, but it doesnt seem to be working. Any solutions will greatly beappreciated.This is the settings in PR: SPRO-MM-Purchasing-PR-Define document type
Doc type: RV Outl. agmt. requisn. 10 01 02 RVB R
once above is correct than
select the doc type RV and click on the allowed item category
where can see as below
Item cat Text item category
Standard
K Consignment
D Service
select the doc type RV and click on the Link purchase requisitio in left side
MK Quantity contract M Material unknown Standard
WK Value contract Standard Standard
WK Value contract K Consignment Standard
WK Value contract M Material unknown Standard
WK Value contract W Material group Standard
Now go to contract doe type
you will see
MK Quantity contract 10 02 AZ SAP MKK
WK Value contract 10 02 AZ SAP WKK
select any doc type and click on allowed item category
here you would see
Standard
K Consignment
L Subcontracting
M Material unknown
D Service
than click on link purchase requisition by selecting doc type MK or WK
RV Outl. agmt. requisn. Standard Standard
RV Outl. agmt. requisn. Standard K Consignment
RV Outl. agmt. requisn. Standard M Material unknown
RV Outl. agmt. requisn. K Consignment K Consignment
RV Outl. agmt. requisn. D Service D Service
once you have all this set up than you can create the contract based on the RV reqs
Maybe you are looking for
-
How to print fax call log on hp laserjet pro mfp m375
There should be a way to print fax call log on hp laserjet pro mfp m375. Not sure whether to go in "tools", "fax", "settings" or what! Can somebody please give me instructions ASAP. Does anybody else find HP's tech support - if your warranty runs
-
I want to get my albums showing in a list format. How do I do that?
I want to have my albums show in a list format, How do I do that?
-
How to start with crystal reports
Dear Experts, I am new to crystal reports, request you to kindly provide any tutorials or How to guides, so that I can start with Crystal reports. Also tell what would be the Software/Hardware required to start with crystal reports. Currently we are
-
Hi gurus, Here i have to extract data related to ACCOUNTS PAYBLE OPEN ITEM DATA for that i have to extract Header data , item data, and vendor data, bank details.....so pls advice me from how many tables i have to take data ... I knew some
-
SAP_COLLECTOR_FOR_PERFMONITOR job failed
Hi Basis gurus, This job is failing with short dump EXPORT_TOO_MUCH_DATA ABAP; program, "RSORAT6M", had to be terminated because one of the statements could not be executed at runtime. I would like add one more information, it gets cancelled at parti