Storage issues with the cloud?

the cloud back up is not possible on my Iphone 4S;  error I receive is not enough storage on the cloud - need 3 more more GB available ; but I get a read out of total storage available 5.0 GB; avaialble; 4.7 GB available.

The message means that you need 3 GB more than curriently available - i.e 7.7 GB.  Time to either buy more space on iCloud or remove stuff (like photos/videos) from the phone.
iOS: Improve backup and restore times by importing Camera Roll or Saved Photos

Similar Messages

  • Issue with The Cloud (UK)

    Hoping someone might have come across this....
    I tried to access the cloud today, and it asked for my Phone number again. Which is a bit strange since I've already previously done this.
    I entered my phone number as it requested but it gave an error saying my phone could not be authorised and to contact O2.
    I called O2 and explained the problem and basically, their answer is to keep trying. Has anyone had this problem before and got a fix, its very annoying as I use the cloud a lot and was a significant part of my decision making when I first got the iPhone. I thought O2 would have at least tried to sort it out.
    Anyway if anyone has any tips please let me know. Oh I tried a couple of cloud hotspots with the same issue.

    My understanding was that when first accessing a The Cloud hotspot, I'd be asked for my number to register, and after that it would be automatic. I haven't found this in the past, but have had to enter my number each time, though I've never been denied access once I did this. I took it as a minor irritation, but since I could connect, I didn't bother contacting 02 about it. It seems your problem is more serious, and may not be related to mine. Have you tried ringing The Cloud to see what they have to say about it?
    Have a look at the following which might be helpful:
    http://support.thecloud.net/ics/support/default.asp?deptID=5380

  • HT1766 IPad Backup Issue with The Cloud

    I have a message on my iPad screen that says '"iCloud Backup"  The iPad hasn't been backed up in 4 weeks. Backups happen when this iPad is plugged in, locked and connected to Wi-Fi.'  I click "ok" but message won't go away.  I can't turn off the iPad either or lock the screen, because the dialogue box with this error message in it won't go away, even when I plug it in so it is fully charged and connected to Wi-Fi.

    Try a reset. Hold the Sleep and Home button down (together) for about 10 seconds until you see the Apple logo. Ignore the red slider.

  • CD-ROM drive letter changed to the next available letter after an issue with the Storage appliance.

    Server platform:Windows server 2008 R2 Enterprise.
    Last time we experienced an issue with the storage device we are using to  attach a disk to our server 2008 (virtual). This storage device is also providing storage to the ESX where the server 2008 is hosted.
    The drive configuration in the server was:
    System C:\
    Tools D:\
    Apps E:\
    CD-ROM F:\
    Some hours after the storage appliance issue, we realized the Application on the server was not working and then we restarted the server. After restarting the server we went to the file explorer and realized that the Apps volume had the drive letter F and
    the CD-ROM had the E letter assigned.
    I assume windows lost the Apps disk due to the SAN disconnection. Maybe the CD-ROM was also disconnected and when the Storage appliance was connected again the CD-ROM acquire the next drive letter it found, which was the letter E:. Then the Apps disk was
    also discovered by Windows and it assigned the next available letter, F:.
    I was looking for some MS knowledge base to see how Windows 2008 server assigns the letter to the CD-ROM and how we can permanently fix the letter assigned to the disks and the CD-ROM so that this issue won't happen again. As you know many applications use
    the path including the drive letter.
    I thought that when you set a CD-ROM drive letter, it remains forever as is, and that in case of a SAN disconnection Windows assigns the same letter the drive had before the disconnection.
    Please advice if you have some documentation about this. And let me know if you have any thoughts about what really happened to prevent this in the future.
    Thank you guys!! 

    Hi, for the APP's drive it could had been assigned a new letter if the system did seen it as a new disk/partition.
    The partition was on your esx's LUN on the SAN ? (not an iSCSI connection from inside a VM?)
    Regards, Philippe
    Don't forget to mark as answer or vote as helpful to help identify good information. ( linkedin endorsement never hurt too :o) )
    Answer an interesting question ? Create a
    wiki article about it!

  • Previous computer crashed without my Adobe CS3 Design Standard for Macintosh application being uninstalled, I'm having issues with the CS3 on my new Macintosh laptop. Please help!

    Since the previous computer crashed without my Adobe CS3 Design Standard for Macintosh applications being uninstalled, I'm having issues with the CS3 on my new Macintosh laptop. Please help, I've tried using the online "contact us" with no success, unable to get in contact with a tech support agent that can assist me.

    CS3 is too old to run on a new Macintosh laptop, sorry. You'll have to purchase CS6 or a Creative Cloud subscription.

  • LR5 Issues with the CC Version?

    Hello,
    I've had a few deal-breaking issues with the released version of LR5 for Windows and read about several others.  There seems to be some consistency with the types of issues people are having with, at least, the Windows version of the software.  I think that Adobe is splitting the code stream with LR5 since it is offered as both a stand-alone product and as part of the Creative Cloud.
    Done with LR5
    Spot Removal Mouse Movement
    (several other issues are mentioned within the above threads)
    I am wondering of any Creative Cloud users of LR5 are having the same problems that have been reported in this forum with the stand-alone version.
    Thanks,
    ~Steve

    Experiencing same problems with spot removal in Lightroom CC (2015).
    I'm going to look for a new LR CC thread but posting here for now.
    Using iMac 5K
    4Ghz i7
    16GB Ram
    AMD Radeon R9 M290X 2048 MB
    Wacom Intuos 3. Performance with tablet slower than mouse but still lots of lag with the mouse. Again, slower when 1:1 but also plenty of lag when FIT.
    Anyone having similar experience with LR CC - thoughts much appreciated?

  • HT1766 What if an ipad is the only device you have from Apple? How could you back your things up with the cloud ?

    Hi my issue is that I dropped my ipad, and the screen is now blue. I have tried pressing the power button and the center button (I even pit it on the charger), but the screen is still blue. My questions are am i covered to get a replacement, and how do I back-up my stuff with the cloud if the ipad is my only apple device?

    If you didn't have iCloud backup turned on before you broke it, you are out of luck.
    Accidental damage is not covered by warranty.
    You can get an out of warranty replacement from Apple for around $250.

  • Would a flash storage issue affect the battery being charge?

    I received a notice about my macbook air and defective flash storage. I brought my macbook into an apple store on Saturday to have the firmware updated. Since then my macbook has been unable to charge the battery with the adaptor plugged in. I am wondering if the flash storage has anything to do with this?  I have not had an issue with the battery charging or not charging before this.

    http://discussions.apple.com/thread.jspa?threadID=2474499&tstart=0

  • Frequent issues with the contacts

    Hi,
    Everyday I face issues with the contacts. It does not search the contact I wanted to look and stuck on the first page of the list for few seconds and then move to the searched contact. But when I open that contact,  it shows the contact details of first name of my conact list, not the one I searched. It is irritating and happens everyday.
    Only way to resolve this is by restarting the device or power off and ON it. 
    Does anyone face this. Is there any solution availble for this issue. 

    I am a real estate broker and I have 1200 contacts and when I transferred the contacts from my old BB Torch to z10, the transfer was successful and all my contact fax numbers are listed as fax. BB has announced that they are going to have USB Outlook sync in the future release of BB link. I am eagerly waiting just like you, it is important part of my business and online cloud sync is not an option for me. I currently email my contacts from my desktop to my z10 as a .vcard and update any new contacts.. Same with the calendar. You can also save it on your sd card. A temp solution until the feature is available. or use outlook.com or other cloud service. 
    To add a fax to your contact, open the contact in edit mode, click on add field and select fax.. You also have a choice to set fax work, home , direct or other.

  • Lost connection with the cloud

    Curious, if my StorSimple solution loses internet connection and cannot communicate with the cloud, what would the expected behavior be? Will my volumes go offline or will I still have use of my local data? What happens if a cloud snapshot is in progress? 

    The StorSimple device tiers old data from the local tiers to Azure.  If the device loses connection with Azure, the data on the local disks is accessible to hosts.  However, if a block of data which is present on the cloud is requested by the host,
    the device retries getting the data.  If the data cannot be retrieved within 4 minutes, the volume/lun will be put in an offline state.  If the connection is established within the 4 minute period, the data is fetched from Azure and served to the
    host.
    If a cloud snapshot is in progress the job keeps trying to send the data to Azure and if there is a prolonged outage, the job will be cancelled after 4 hours.

  • Hp Envy X2 issues with the touchpad gestures

    I am experiencing some issues with the touchpad gestures after every time it wakes up. I am already update the drives posted in the hp web site, is anybody out there with the same issues?

    I couldn't find any graphic drivers for that notebook, but here is an updated chipset that is available for your notebook: http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-114872-1&cc=us&dlc=en&lc=en...
    It was released 6 days ago, so it might enable that option for you. It can't hurt to try it out. If not, you might just have to hold out a little bit until they update the driver. 
    -------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

  • Anybody else having issues with the new 1.1??

    For some reason, I have encountered two issues already.. Whenever I'm exporting my galleries as web pages, nothing happens! It creates a null folder that I specify but then doesn't export any photos or html pages.. If I delete the folder and do it again, the exact same way, for some miracle it then begins to export.. There is no logical explanation and its clear that its a bug..
    Also, when exporting multiple images into CS2, that also fails for me.. It only opens up one picture and even though the others are selected, it doesn't seem to do the trick.. Its not my computer because i have a brand new quad w/ 4 gigs of memory.. I didn't encounter either of these issues with the older version..
    Anybody else??

    I tried both, and was successfull both times.
    External Edit:
    1. I selected 2 images (D200 RAW images).
    2. Right clicked to get the contextual menu and selected Open with External Editor (I have my prefs set up for Photoshop).
    3. Both images opened in Photoshop.
    I can't image it being system specific. What camera and file type are you using?

  • Issues with the Surface Pro 3's pen in Photoshop CS6

    I used photoshop CS6 with no problems on my old computer that was connected to a graphics tablet.
    However, I recently bought a new windows computer called the Surface Pro 3. Everything works perfectly with the trackpad and touch, but I've had some issues with the Surface pen.
    The pen can draw on the canvas, but whenever I click something on any of the windows with the pen, the entire application freezes and I would have to click the computer's taskbar at the bottom to unfreeze the application.
    It's impossible to work like this. Is there any solution to fix this problem? It says that the version of photoshop I have is Adobe Photoshop Version: 13.1.2

    If you have Photoshop CS6 version 13.1.2 which is the Subscription version of Photoshop,  You shoule  Isstall Photoshop CC 2014 on your surface Pro 3.  It will work without problems on the surface Pro 3 and you will also have the option have the option to use Photoshop CC 2014 preference 2x UI to scale Photoshop's UI up in size on your Surface Pro 3.
    If you do not have a subscription the Perpetual version of windows CS6 should be version 13.0.1.3.  In that case the only way to scale Photoshop UI is to have windows do it. You would need to to update your windows 8.1 registry and add an external Photoshop manifest file in your Photoshop CS6 folder.  To get the Surface Pro 3 pen to work with Photoshop you would need to install NTig pen device drivers the support the wintab APIs.
    You will not be able to use Photoshop without a keyboard popping up the windows onscreen keyboard is too cumbersome.  You can use a utility like Touchkey to create Overlay touch keys on Photoshop and use Photoshop without a keyboard.
    The differece betweek Adobe 2XUI scaling an windows scaling ise windows scaling scalet the image areas as well as the Photoshops UI
    A couple of touchkey overlat keyboards could look something like this

  • Is there a recommended limit on the number of custom sections and the cells per table so that there are no performance issues with the UI?

    Is there a recommended limit on the number of custom sections and the cells per table so that there are no performance issues with the UI?

    Thanks Kelly,
    The answers would be the following:
    1200 cells per custom section (NEW COUNT), and up to 30 custom sections per spec.
    Assuming all will be populated, and this would apply to all final material specs in the system which could be ~25% of all material specs.
    The cells will be numeric, free text, drop downs, and some calculated numeric.
    Are we reaching the limits for UI performance?
    Thanks

  • Design issue with the multiprovider

    Design issue with the multiprovider :
    I have the following problem when using my multiprovider.
    The data flow is like this. I have the info-objects IobjectA, IobjectB, IobjectCin my Cube.(Source for this data is s-systemA)
    And from another s-system I am also loading the masterdata for IobjectA
    Now I have created the multiprovider based on the cube and IobjectA.
    However, surprisingly join in not workign in multiprovider correctly.
    Scenario :
    Record from the Cube.
    IObjectA= 1AAA
    IObjectB = 2BBB
    IObjectC = 3CCC
    Records from IobjectA =1AAA.
    I expect the record should be like this :
    IObjectA : IObjectB: IObjectC
    1AAA       :2BBB       :3CCC
    However, I am getting the record like this:
    IObjectA : IObjectB: IObjectC
    1AAA       :2BBB       :3CCC
    1AAA         : #             :#
    In the Identification section I have selected both the entries for IobjectA still I am getting this error.
    My BW Version is 3.0B and the SP is 31.
    Thanks in advance for your suggestion.

    May be I was not clear enough in my first explanation, Let me try again to explain my scenario:
    My Expectation from Multi Provider is :
    IObjectA
    1AAA
    (From InfoObject)
    Union
    IObjectA     IObjectB     IObjectC
    1AAA     2BBB     3CCC
    (From Cube)
    The record in the multiprovider should be :
    IObjectA     IObjectB     IObjectC
    1AAA     2BBB     3CCC
    Because, this is what the Union says .. and the Definition of the multiprovider also says the same thing :
    http://help.sap.com/saphelp_bw30b/helpdata/EN/ad/6b023b6069d22ee10000000a11402f/frameset.htm
    Do you still think this is how the behaviour of the multiprovider.. if that is the case what would be the purpose of having an infoobject in the multiprovider.
    Thank you very much in advance for your responses.
    Best Regards.,
    Praveen.

Maybe you are looking for