Storage Reports Management question

I am trying to modify the values of certain parameters within the storage reports. For example I am trying to generate a report based on files by owner. Currently the "Maximum number of owners per report" is 10 and the "Maximum number
of files per owner per report" is 100. We have about 1000 users with about 1 million files so the report that gets generated does not cover everyone or their files. Using powershell I have been able to increase the number of users to 100.
If I try to increase the number of users to say 1000 I get an error message stating
"Value of 1000 is not valid for 'Value'. 'Value' should be between 'Minimum' and 'Maximum'. Parameter name 'Value'."
This is the same case for the "Maximum number of files per owner per report". I am trying to figure out what the minimum and maximum are but it is not evidently clear. I am on a Windows 2012R2 clustered file server. Any help would be
appreciated.
Thanks,
Rene

Hi Rene,
Storage Report has the max limitation which is 100 since first version. I saw several threads with same concern about that limitation in past years.
I can log this as a customer requirement as well. With enough requirements it may be changed with an update or in further version.
Thank you for your time!
Please remember to mark the replies as answers if they help and un-mark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Similar Messages

Storage Reports aren't finding known file types

I have a Windows Server 2008R2 file server and I've configured a "Files by File Group" report to find audio/music and image files on a specific drive. The report isn't finding all of the WMA and JPEG/JPG files on the drive. I manually
ran a search for the WMAs and came up with 3,963 WMA files (16GB), whereas the Storage Report Manager report only showed one file. I'm trying to determine why the report isn't finding these (and possibly) file types.
Any thoughts?

Hi,
Currently I cannot help testing this behavior. I assume you are using FSRM for doing this job. Please check if .WMA and .JPG (or JPEG) is added in "audio/music and image files" groups. There should be a button to add file type to a group.
Please remember to mark the replies as answers if they help and un-mark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Storage Foundation Manager

Hi,
Sorry if this is the wrong forum for this question - if so please advise.
I've installed Storage Foundation Basic on some of my servers, and Storage Foundation Manager on one Solaris box to manage all the storage.
I easily got VEA on the manager to connect to the otehr hosts and do some basic volume management on them, but I cannot seem to get the actual Storage Foundation Manager web gui (on port 8443) to recognise my hosts. The inventory on there is full of 0s, and I can't see any obvious menu items to let me connect to my hosts or "discover them".
Has anyone used Storage Foundation Manager in a Solaris environment? Any advice welcome.
Cheers,
GXW

After installiing the SFM packages on the central server, you have to go to each of the managed hosts and migrate the managed host to report to the central server.
try these steps
-login to the manage host
- cd /opt/VRTSmh/bin
-./migrate central_mode -d <central server FQHN> -p <you agent password>
SFM 2.0 is releasing in a couple of days and there is no need to do anything on the managed host to get this reporting except installing the managed host package. You just install the CS packages on the central server and the managerd host package on the MH and you can add the MH to the CS using the webgui.

PeopleSoft Report Manager does not show up reports

Folks,
Hello. I am using Peopletools 8.49.
The Report Manager has 4 tabs: List, Explorer, Administration, Archives
After I run reports using Process Scheduler, nothing shows up under the above 4 tabs and this message comes up:"Invalide or missing parameter in request" under List tab.
I have followed "Process Scheduler Documentation" - Chapter 5 "Using Report Manager" to configure it, but it's not working out.
The following solution is for PeopleTools 8.44:
http://peoplesoft.ittoolbox.com/groups/technical-functional/peopletools-l/report-manager-nothing-showing-under-list-1011644
Can any folks tell me how to solve this problem in PeopleTools 8.49 ?

Folks,
Hello Thanks a lot for replying.
1) The default local node (PT_LOCAL) has been set a password that is login user password.
2) I think I define the Report node correctly under "PeopleTools>ProcessScheduler>ReportNodes" as follows:
Http Information is selected.
URL: http://127.0.0.1/psp/ps/psreports
(psp is Domain name, ps is Site name while configure Webserver. psreports is a folder in C:\)
URI Host: http://127.0.0.1
URI Port: 80
URI Source: don't need this since Scheduler and Webserver are in the same machine.
Logi ID: PSADMIN
Password:PSADMIN
Under Intergration Broker, I have done the follows:
1) Gateway, Domain, Pub/Sub Server are running.
2) Service Operations: PSRF_FOLDER_CREATE, PSRF_REPORT_CREATE, PSRF_REPORT_DATE_CHANGE AND PSRF_REPORT_DELETE are set "active" and "Asynchronous One Way".
3) Login User PSADMIN are granted Roles "Report Super User" and "Report Dist Administrator".
But Report Manager still cannot display Reports by this point.
The only problem is that under "PeopleTools>IB>Configuration>Service Configuration>UDDI Configuration", when Ping the Inquiry URL and Publish URL, I got such an error message: "External System Contact error."
Inquiry URL: http://PTNTAS28/UDDI/INQUIRY
Publish URL: HTTP://PTNTAS28/UDDI/PUBLISHING
I think the "External System Contact error" cause Report Manager cannot display Reports. This problem is caused by "Gateway" or "UDDI Server" not running correctly.
Thus, I have 3 questions:
First, Do I need to change 4 Service Operations from "Asynchronous One-way" to "Request/Response" ? What is Receiver node for routings ?
Second, do I need to set up UDDI Server and configure it ?
Third,, where to set up single signon for the default local node (PT_LOCAL) ?

Server Error in '/Report Manager' Application: System.IO.IOException: The file exists. When trying to export a completed report.

I am using SQL Server 2005. I run a report which runs and renders perfectly. But I am unable to export it into any format. It fails with the following error:
Server Error in '/Reports' Application.
The file exists.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.IO.IOException: The file exists.
Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
Stack Trace:
[IOException: The file exists.
Microsoft.Reporting.WebForms.ServerReport.ServerUrlRequest(Boolean isAbortable, String url, Stream outputStream, String& mimeType, String& fileNameExtension) +489
Microsoft.Reporting.WebForms.ServerReport.InternalRender(Boolean isAbortable, String format, String deviceInfo, NameValueCollection urlAccessParameters, Stream reportStream, String& mimeType, String& fileNameExtension) +924
Microsoft.Reporting.WebForms.ServerReportControlSource.RenderReport(String format, String deviceInfo, NameValueCollection additionalParams, String& mimeType, String& fileExtension) +84
Microsoft.Reporting.WebForms.ExportOperation.PerformOperation(NameValueCollection urlQuery, HttpResponse response) +153
Microsoft.Reporting.WebForms.HttpHandler.ProcessRequest(HttpContext context) +75
System.Web.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute() +303
System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously) +64
I have seen this question asked several years ago, but have never seen a response that suggests what the issue may be.
I would really appreciate any help in resolving this problem.\
The application has been running from quite some time and this problem started just recently.
Thank You.
-Rick

Hi Rick,
According to your description, the exception “System.IO.IOException: The file exists.” is thrown out when you export the report on report manager.
Generally, the exception is thrown out because there are more than 65535 files without deleting previous temporary files in our temporary directory. Based on my research, it has reported the same issue when exporting the report on report manager, and deleting all
temp files from C:\Windows\Temp could resolve the issue. I would also suggest you remove the temporary files from C:\Users\<username>\AppData\Local\Temp. Please refer to the first comment at this link:
System.IO.IOException: The file exists
Reference:
Path.GetTempFileName Method
If you have any question, please feel free to ask.
Best regards,
Qiuyun Yu
Qiuyun Yu
TechNet Community Support

Error while running script HyperV - Dash Board - VM and Storage Report

Hi Team,
I am getting below error while running HyperV dashoboard monitor & storage report script from Technet script library.
HyperV - Dash Board - VM and Storage Report
Finished processing VM - xxxx
Processing VM - xxxxx
Get-VHD : Unable to cast COM object of type 'System.__ComObject' to interface type 'System.Management.IWbemServices'.
This operation failed because the QueryInterface call on the COM component for the interface with IID
'{9556DC99-828C-11CF-A37E-00AA003240C7}' failed due to the following error: The requested object does not exist.
(Exception from HRESULT: 0x80010114).
At C:\Scripts\HyperV-DashBoard-v2.1.ps1:210 char:10
+ If (Get-VHD -VMID $vmDetails.VMID -ComputerName $cNodes.Name[$i])
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : NotSpecified: (:) [Get-VHD], InvalidCastException
+ FullyQualifiedErrorId : Unspecified,Microsoft.Vhd.PowerShell.GetVhdCommand
Get-VMNetworkAdapter : Unable to cast COM object of type 'System.__ComObject' to interface type
'System.Management.IWbemServices'. This operation failed because the QueryInterface call on the COM component for the
interface with IID '{9556DC99-828C-11CF-A37E-00AA003240C7}' failed due to the following error: The requested object
does not exist. (Exception from HRESULT: 0x80010114).
At C:\Scripts\HyperV-DashBoard-v2.1.ps1:238 char:12
+ If ((Get-VMNetworkAdapter -VMName $vmDetails.Name -ComputerName $cNodes.Na ...
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : NotSpecified: (:) [Get-VMNetworkAdapter], InvalidCastException
+ FullyQualifiedErrorId : Unspecified,Microsoft.HyperV.PowerShell.Commands.GetVMNetworkAdapterCommand

Hi ,
I found that the problem had been solved in the script blog by your self :
http://gallery.technet.microsoft.com/scriptcenter/HyperV-Dash-Board-VM-Disk-299bac7d/view/Discussions#content
Best Regards
Elton Ji
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

SQL Server 2012 Reporting Services Report Manager using non-HTTPS URLs on part of site

For potential ease of understanding, I am seeing the same issue as this person
here.
Currently, my site is successfully using HTTPS in all areas of the /Reports site, with a single exception. If you drill down to a report and go to "Manage", the following links are all http://, not https://:
Parameters
Data Sources
Subscriptions
Processing Options
Cache Refresh Options
Report History
Snapshot Options
Security
These remain regardless of the configuration combinations I enter in Reporting Services Configuration Manager. I'm not sure what makes this part of Report Manager special. Even if I only enable https in the Report Manager URL settings, these links all stay
as http (port 80). I can find no references in config files to this.
Any assistance is welcome. Obviously having non-encrypted links is not acceptable.

Hi SteveKSM,
According to your description, you specify the report manager URL as https://. When you open the child items on report manager, the URL change to the http://.
In your scenario, since you want to set SSRS to require all SSL connections, you need to change the SecureConnectionLevel value to 3 in RSReportServer.config file (located in C:\Program Files\Microsoft SQL Server\MSRS11.MSSQLSERVER\Reporting Services\ReportServer).
It means that all communication must use secure connections. So please specify this attribute like below:
<Add Key="SecureConnectionLevel" Value="3"/>
Reference:
Configuring the Report Server for SSL Communication and Internet Deployment:
https://msdn.microsoft.com/en-us/library/cc304416.aspx
Report Manager Links with SSL
If you have any question, please feel free to ask.
Best regards,
Qiuyun Yu
Qiuyun Yu
TechNet Community Support

SSRS 2012 - Groups in Report Manager aren't present when exported to Excel

Hi all, hope somebody can help with this issue, as I cant seem to find any other posts about it
I have a report in SSRS2012. It was copied from SSRS2005 quite recently, as we have upgraded. The SQL developer said that it didn't need any code changes, as he had some kind of tool to test code problems between the two versions.
The report has a table, with 5 row groups, and one detail row. The table is setup as follows:
Name                                         Sales
Costs       Profit
Group1
   Group2
      Group3
         Group4
            Group5
               DetailsRow
When I run this report using the Report Manager website from SSRS2005, and then export to Excel 2013, I get the 6 row groups in Excel, no problem whatsoever. I can drill into each group in Excel, using the group drilldown column on the left hand side. This
works the same as the Report Manager website.
If I run the exact same report from the Report Manager website in SSRS2012, the Report Manager result is the same as SSRS2005 - all the row groups are present, and the drilldown works fine. However, the export to Excel has issues with the groups. There are
only 3 row groups showing in Excel, along with a column group added for no apparent reason. Drilling into each group shows inconsistent details, and there is no apparent logic as to what is shown within each group.
Hopefully, someone has seen this issue before, and can help, because I have no idea what to do, having spent a couple of days trying to figure it out. I should also mention, that this issue with groups is seen on all my reports which have groups, not just
this report
Thanks for any and all help
Naz

Hi Naz,
According to your description, the report works correctly in SSRS 2005 while the same report doesn’t work in SSRS 2012 when exporting to a Excel file.
In your scenario, please make sure you are migrating the report from SSRS 2005 to SSRS 2012 instead of copying the .rdl directly. Generally, we are using Reporting Services Migration Tool to migrate reports between report server. Please refer to this article:
SQL Server Reporting Services: Migrating SSRS reports, data sources and subscriptions from one server to another.
After migrating the report successfully, you should upgrade the report definition in SQL Server Data Tools to upgrade the .rdl file. Please refer to this article:
Upgrade Reports.
If you have upgraded the report but the issue still persists, please provide report design for our analysis. If possible, please provide some screenshots about the preview result and Excel render result.
If you have any question, please feel free to ask.
Best regards,
Qiuyun Yu
Qiuyun Yu
TechNet Community Support

How to show unhidden parameter in linked report in report manager in ssrs ?

Hi,
in my ssrs report1 i have added a image,if i click on that image it will redirect to report2 and it will take parameters from report1 automatically and all parameters are in report2 are hidden because it will consider report1 parameters,but here my requirement
is
in report2 i have total six parameters and all are hidden,i want to show the one of the hidden parameter(LOB) in report,so, i was set visibility property to visible, now i am able to see that one parameter(LOB).
but after deploying the report in report manager,when i click on the image it is not showing the parameter(LOB)
Do i need to change anything in image properties?please let me know
Please help me with this issue how to show the that one particular parameter(LOB) in report manager which is unhidden?, it is an urgent requirement.
here we are building reports on cube.
Please let me know if you need more information.
Thanks in advance,
Naveen

Hi Naveen,
As per my understanding, since the purpose of a drill-through report is to pass the parameters from main report to the details report, we wouldn't want users to see or modify the parameters in the details report. Therefore, by default, the parameter pane
is automatically hidden in the details report.
In this scenario, we can try to use “Go to URL” instead “Go to report” option to work around this issue. If the parameters are multi-value parameters, we can use the expression to like below:
="javascript:void(window.open('http://server_name/reportserver?/Report_folder/Report_name&A=" &Join(Parameters!B.Value,"&A=") & "','_blank'))"
If the three parameters are single-value parameters, we can use the expression to like below: ="javascript:void(window.open('http://server_name/reportserver?/Report_folder/Report_name&A=" & Parameters!B.Value & "','_blank'))"
If there are any other questions, please feel free to ask.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

Recieving Error Viewing Reports in Report Manager

I am receiving the following error trying to view a report in Report Manager and Reporting Services: "
Your browser does not support scripts or has been configured not to allow scripts" I have ensured that scripting is enabled and added the site to my trusted sites and still does not work. What am I missing? I am using SQL Server 2008
R2. My reports work fine in a test windows application, but not in the browser.
I can see the header and footer of the report and the toolbar, but the body is empty. It's only when I select view source that I see the error.
Here is the complete error when I View Source:
<noscript>
 Your browser does not support scripts or has been configured not to allow scripts.
</noscript><span id="ctl31_ReportViewer"><div id="ctl31" onclick="if ($get('ctl31_ctl04') != null && $get('ctl31_ctl04').control != null) $get('ctl31_ctl04').control.HideActiveDropDown();" onactivate="if ($get('ctl31_ctl04') != null && $get('ctl31_ctl04').control != null) $get('ctl31_ctl04').control.HideActiveDropDown();" style="height:100%;width:100%;">
<div id="ctl31_HttpHandlerMissingErrorMessage" style="border-color:Red;border-width:2px;border-style:Solid;padding:10px;display:none;overflow:auto;font-size:.85em;">
<h2>
Report Viewer Configuration Error
</h2><p>The Report Viewer Web Control HTTP Handler has not been registered in the application's web.config file. Add <add verb="*" path="Reserved.ReportViewerWebControl.axd" type = "Microsoft.Reporting.WebForms.HttpHandler, ReportingServicesWebUserInterface, Version=10.0.0.0, Culture=neutral, PublicKeyToken=89845dcd8080cc91" /> to the system.web/httpHandlers section of the web.config file, or add <add name="ReportViewerWebControlHandler" preCondition="integratedMode" verb="*" path="Reserved.ReportViewerWebControl.axd" type="Microsoft.Reporting.WebForms.HttpHandler, ReportingServicesWebUserInterface, Version=10.0.0.0, Culture=neutral, PublicKeyToken=89845dcd8080cc91" /> to the system.webServer/handlers section for Internet Information Services 7 or later.</p>
I even get these errors in a test web application, even though scripting is enabled and my httpHandlers are defined in my web config for both system.web and system.webserver.

Hi Christie Tremblay,
Based on your description, you are experiencing the issue when you trying to view a report in Report Manager and Report Server, you got the error message ”Your browser does not support scripts or has been configured not to allow scripts” and “The Report
Viewer Web Control HTTP Handler has not been registered in the application's web.config file”, but the report work fine in the test in the test windows application, right?
If you use IIS 7.0 in Integrated mode, you must keep the HTTP handler that applies to your IIS version in its respective section. If you remove or modify the HTTP handler configuration settings, the ReportViewer Web server control in your Web form will display
the error message ”The Report Viewer Web Control HTTP Handler has not been registered in the application's web.config file” that tells you to add it back to the respective section in the web.config file.
In your scenario, the issue may occur due to one of the following factors:
Incorrect Web.config settings for ReportViewer control
Incorrect report path typed into the ReportViewer control
Improper Managed pipeline mode of the Application Pool
Open the IIS Manager, verify the Managed pipeline mode is set to Classic not Integrated.
For the error “your browser does not support scripts or has been configured not to allow scripts” can be caused by the browse you are using not support to open the Report Server and Report Manager:
http://msdn.microsoft.com/en-us/library/ms156511(v=sql.105).aspx
Article about details information for your reference:
Verify the Web.config settings for ReportViewer:
http://msdn.microsoft.com/en-us/library/ms251661(v=vs.100).aspx
If the Report Viewer control is configured to run in remote processing mode, please ensure the report server URL or the report path are correct. For more information, please see:
http://msdn.microsoft.com/en-us/library/ms252075(v=vs.100).aspx
Similar threads which already resolved for your reference:
https://social.msdn.microsoft.com/Forums/sqlserver/en-US/e515595c-7c63-4852-a9c4-bc4254341453/report-viewer-controls-are-disabled?forum=sqlreportingservices
https://shahjadatalukdar.wordpress.com/2013/08/05/rdlc-web-config-settings-for-reportviewer/
If you still have any question, please feel free to ask.
Regards
Vicky Liu

Cannot download .rdl files in SSRS Report Manager 2012.

I am unable to download .rdl reports in report manager 2012.
I am able to create reports using report builder and I am able to run /view reports that I create.
However , the drop down box does not work work when I attempt to access drop down menu that is to the right of the report.
I am running this report manager on my local machine. I am an administrator on my local machine.
Under "site settings" I have set up my user account, which is administrator, I have checked the System Administrator box and System User box.
Under "folder settings" I have checked all of the boxes. for my user account, I have all of the boxes selected. Browser, Content Manager, My Reports, Publisher, Report Builder.
My account is also sysadmin on the database.
After checking all of this, I still cannot access the drop down menu in order to download .rdl files. The menu does not activate at all when I click it.
What are some things that I can further check/confirm?
[email protected]

Hi wayne,
According to your description, you are unable to access the dropdown menu of a report so that you can't download the .RDL file directly from Report Manager. Right?
In this scenario, it can be many reasons to cause this problem, even the current user has enough authority to do anything on Report Manager. Please try to do trouble shooting as below:
Run the browser as an Administrator.
Add the Report Manager URL as Compatibility View settings.
Use http://<servername>/reports instead of using Localhost.
If the steps above still can't make you see the dropdown menu, it might caused by corrupt reportingservices.js file. Please try to restore this file on server.
Reference:
SSRS 2008 - Report Manager - Drop-Down menu gone missing
can not open the drop-down arrow besides the report in SSRS report manager to add subscription
If you have any question, please feel free to ask.
Best Regards,
Simon Hou

ICloud storage and backup question

According to the most answers that I have been searched here in iCloud ,I found out that iCloud didn't back up all the photos on my photos stream (which I couldnt restore them later -_-") but pictures will be keep in iCloud photos stream just for only 30days Then will be deleted forever. As I experienced updating iOS recently,my phone was cracked during upgrading and I have to restore everything in my iPhone as a default factory setting. once I backup my photos from iCloud,I got only photos that I clicked back-up manually since 2012 :"( and all my new photos were not appeared forever. In this case,that iCloud didn't keep those photos,why my iCloud storage is showing full?? Any idea...pls advice..

Your iCloud backup only includes photos (and videos) in your camera roll. It doesn't included any photo stream photos. You are correct that photo stream photos only remain in iCloud for 30 days. If you have photo stream photos that are not in your camera roll that you want included in your iCloud backup, you have to save them to your camera roll before performing the backup.
Zushee wrote:
As I experienced updating iOS recently,my phone was cracked during upgrading and I have to restore everything in my iPhone as a default factory setting. once I backup my photos from iCloud,I got only photos that I clicked back-up manually since 2012 :"( and all my new photos were not appeared forever. In this case,that iCloud didn't keep those photos,why my iCloud storage is showing full?? Any idea...pls advice..
Sorry but I don't understand what you're asking here. If your question is why is your iCloud storage full, you can find out by going to Settings>iCloud>Storage & Backup>Manage Storage to find out what is using your iCloud space.

Website Storage Settings Manager

I can't access my Website storage settings manager. I am thinking one of my kids messed this up somehow.... My old FB games are just not opening at all, but new ones will work. I can't access the Local storage because the game won't load at all, so there is no image to click on. When I go to the Website storage settings manager, it says I need flash to view the magager - ooooookaaaay. when i click on install (which I know I don't need cause I have a Chromebook) it says I don't need it cause I have a chromebook. Ooooookaayyyy. ??????

I came here looking for an answer to that same question. I'm running Windows XP HE, 32-bit, using google chrome browser. Would love to see someone help with this.

Cannot upload report to report manager 2008R2 : The underlying connection was closed: An unexpected error occurred on a receive

Hi all,
I cannot upload a report to our report manager. The message returned in report manager is: The underlying connection was closed: An unexpected error occurred on a receive
I have checked the report server log file and found the below...
Any assistance greatly appreciated.
Thanks, Clay
-------Details--------
System.Net.WebException: The underlying connection was closed: An unexpected error occurred on a receive. ---> System.IO.IOException: Unable to read data from the transport connection: An existing connection was forcibly closed by the remote host. --->
System.Net.Sockets.SocketException: An existing connection was forcibly closed by the remote host
   at System.Net.Sockets.NetworkStream.Read(Byte[] buffer, Int32 offset, Int32 size)
   --- End of inner exception stack trace ---
   at System.Net.Sockets.NetworkStream.Read(Byte[] buffer, Int32 offset, Int32 size)
   at System.Net.PooledStream.Read(Byte[] buffer, Int32 offset, Int32 size)
   at System.Net.Connection.SyncRead(HttpWebRequest request, Boolean userRetrievedStream, Boolean probeRead)
   --- End of inner exception stack trace ---
   at System.Web.Services.Protocols.WebClientProtocol.GetWebResponse(WebRequest request)
   at System.Web.Services.Protocols.HttpWebClientProtocol.GetWebResponse(WebRequest request)
   at Microsoft.ReportingServices.UI.Global.RSWebServiceWrapper.GetWebResponse(WebRequest request)
   at System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(String methodName, Object[] parameters)
   at Microsoft.SqlServer.ReportingServices2005.ReportingService2005.CreateReport(String Report, String Parent, Boolean Overwrite, Byte[] Definition, Property[] Properties)
   at Microsoft.SqlServer.ReportingServices2005.RSConnection.CreateReport(String Report, String Parent, Boolean Overwrite, Byte[] Definition, Property[] Properties)
   at Microsoft.ReportingServices.UI.ImportPageCtrl.ApplyChanges()
   at Microsoft.ReportingServices.UI.BaseApplyPage.ApplyBtn_Click(Object sender, EventArgs e)
   at Microsoft.ReportingServices.UI.ScriptButton.RaisePostBackEvent(String eventArgument)
   at System.Web.UI.Page.RaisePostBackEvent(IPostBackEventHandler sourceControl, String eventArgument)
   at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)

Hi clay,
Per my understanding that you got some error when you upload reports in the report manager, right?
I have checked the log and the issue can be caused by many factors.
It can be caused by the size of the report is too big which will sent the request in its entirety and got a TCP ACK-FIN or RST from server to close the connection, without a response from server when uploading the reports. We can follow these steps
to increase the request size to resolve the issue:
Add the following registry key with the following value:
Key: HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\HTTP\Parameters
Value: DWORD "MaxRequestBytes" set it to a value of 5242880 (5MB). (This number is alterable).
Stop the SRS Windows Service.
From a cmd prompt run "net stop http" then "net start http".
Try and upload your report.
Details information please reference to this similar thread:
http://stackoverflow.com/questions/2238494/cant-deploy-or-upload-large-ssrs-2008-report-from-vs-or-ie
If the above didn't help, please also check below information:
configure the rsreportserver.config file and make the SecureConnectionLevel value set to 0 to solve the problem. By default, the file is under the path:
C:\Program Files\Microsoft SQL Server\MSRS10_50.MSSQLSERVER\Reporting Services\ReportServer
You can refer to the code below:
< Add Key="SecureConnectionLevel" Value="0"/>
The SecureConnectionLevel property allows values of 0,1,2,3, with 0 indicating that Secure Socket Layer is not required for any of the Web service methods. And a positive integer indicates Secure Socket Layer is required for all the Web service methods.
If you still have any problem, please feel free to ask.
Regards
Vicky Liu
Vicky Liu
TechNet Community Support

Oracle Report Manager - Please help

Just a quick question for anyone familiar with this product. We have Oracle Applications/Financials 16.1, 10.7 SC and run on DG-UX. It looks like Report Manager is only available for NT and Solaris.... will the Solaris version work on the DG-UX platform as well?
Thanks in advance,
Darius

hello Thiru
thank u for ur help.
here i donot find necessity of using Distinct and groupby clause.
as the docnos are unique in the table i was referring,further
iam not using any function so as to use groupby clause.
Ofcourse i will try with LOV by calling reports from forms.
This particular table contains 12000 records ,each record has 1
doc no assigned to it.That means i want all the 12000 docs to be
viewed in the parameter so that i can select one doc no to view
that particular report.
regards

Storage Reports Management question

Similar Messages

Maybe you are looking for