Storeproc error help...any help appreciated...
Error Executing Database Query.
[Macromedia][Oracle JDBC Driver]Internal error: Net8 protocol error.
The error occurred in C:\Inetpub\wwwroot\Denemeler\Kara_tahta\RMS\NewHire.cfm: line 16
14 :
15 : <cfprocresult
16 : name="NewHire" resultset="1">
17 :
18 : </cfstoredproc>
Some helpful info at the bottom of this link about this error:
http://livedocs.adobe.com/coldfusion/6.1/htmldocs/dataso15.htm
You might also try:
http://www.houseoffusion.com/groups/cf-talk/thread.cfm/threadid:37265
Similar Messages
-
CKF Calculation error - help appreciated!
Hi,
I am using a CKF in report which uses the logic as below.
CKF = (RKF1 - RKF2)*100/RKF2
The CKF is working fine in Development and Quality environment but it is showing wrong values in Test environment.
I have verified the data with the Infoprovider and R/3 data and it is matching perfect.
As I am displaying only the CKF in the report, I am not able to check the other RKFs' values as well.
Is there a way to debug the query in RSRT to stop at the CKF/RKF part?
If not are there any other suggestions?
Thanks in advance.
Prakash CIf query is working fine in Developmemnt and Quality, then I dont see any issue in the query if there were any issues transporting query.
I would try to match the numbers and see if any records are missing in the report. Sometimes it happens that in testing environment master data load or attribute change run is pending and we have filter/variable on the attributes. Due to this reason, trascational data is present in the cube, but they will not appear in the report.
Try to see the possibility and try to drilldown the report as granular as possible to see which records are not appearing in the report.
Other thing you can do is to transport the same query keeping RKF - Hide (Can be shown) to see the RFK value.
But first try to match the data in report and cube and see what are you missing in the report.
- Danny -
When I tried to update my iPad I got an error 9. Now, I am unable to access my iPad. It is in a continuous cycle when I try to update or restore the iPad 2. Plug in to iTunes 12.0.1 (latest version). Click update, told can't update, have to restore. Restore fails with error 9. Any help appreciated.
Here's the cycle:
I plug in my iPad when “cable to iTunes shows on iPad screen. It says "Your iPad can't be updated, you must restore it to factory settings." That bad enough news, but it gets worse.
Click Restore
Extracting software…
Preparing iPad for restore
Waiting for iPad…
Verifying iPad restore with Apple…
(empty bar under the Apple logo…does not show any activity)
“The iPad “iPad” could not be restored. An unknown error occurred (9).”
Notes: I just upgraded to OS X Yosemite 10.10.1 on my iMac (27-inch, Mid 2011) in the last week. It’s the first time I’m tried to backup/update my iPad since the iMac update.
I swapped out the USB cable to a new cable and get the same results.
I also unplugged all other USB devices from the iMac and security on my iPad and still get the same results.
I find it strange that it shows no Serial number for my my iPad 2 when plugged in. It shows “Serial Number: n/a on the screen when it displays: “iPad Recovery Mode To update your iPad without erasing its contents, click Update. To restore your iPad to its factory settings, click Restore iPad.
I prefer to update my iPad, but it displays “Your iPad can’t be updated, you must restore it to factory settings. If you previously backed up the iPad, click Restore Backup after the restore process completes.”
It’s a continuous loop. I get the display on my iPad to plug in the iPad to iTunes, plug it in which ends after going through the above procedure saying an error occurred (9).
So now I cannot use my iPad. When I turn it on I get the display showing me to plug it into iTunes with the cable. Since this is the only option I have I plug it in and the loop begins.
Any advice would be appreciated.
Thanks!Hello jaybearden,
Thanks for the question. After reviewing your post, it sounds like you are not able to restore the iOS device since you get an error 9. I would recommend that you read this article, it may be able to help the issue.
Resolve iOS update and restore errors - Apple Support
Check your security software
Related errors: 2, 4, 6, 9, 1000, 1611, 9006. Sometimes security software can prevent your device from communicating with either the Apple update server or with your device.
Check your security software and settings to make sure that they aren't preventing a connection to the Apple servers.
Thanks for using Apple Support Communities.
Have a nice day,
Mario -
When I attempt to connect to iTunes Store, I receive the following error message: An unknown error has occurred (0x80090318). Any help appreciated!
Hey there Dan256162,
I understand that you are receiving a specific error code when attempting to connect to the iTunes Store, error 0x80090318. I have an article for you that references this code and links you to another article for troubleshooting to address this issue. Here is the article that references the error code:
iTunes: Possible iTunes Store errors - Apple Support
http://support.apple.com/en-us/HT203174
And here is the linked troubleshooting article that will help you resolve the issue:
Apple software on Windows: May see performance issues and blank iTunes Store - Apple Support
http://support.apple.com/en-us/TS4123
Take care, and thanks for visiting the Apple Support Communities.
Cheers,
Braden -
Netweaver 2004s Preview Installation Error - Any Help Appreciated.
Trying to install the Netweaver 2004s Preview Edition.
The following error (in the log file) occurs after pointing to the Java Cryptographic Extension Policy Archive (zip) file and clicking 'next'.
===============================================
ERROR 2007-01-04 00:26:04
FJS-00003 TypeError: this._name has no properties (in script NW_Java_OneHost|ind|ind|ind|ind, line 8987: ???)
ERROR 2007-01-04 00:26:21
FCO-00011 The step collect with step key |NW_Java_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_GetSidNoProfiles|ind|ind|ind|ind|1|0|collect was executed with status ERROR .
===============================================
Any help is appreciated.
Rajendra.Hi,
Drop me a mail to [email protected] I will send you the NW04s installation guide.
regards,
Ranjeet -
Error message: Ipod software update server could not be contacted. I went to control panel, lan settings, clk'd auto detect settings and ok. When i went back to i tunes and clk's update, i got the same error. Any help is appreciated.
Rand221See the previous posts on the right side of this page under the heading "More Like This" that have you same error message.
-
What can I do to get Adobe to download a pdf file it has converted into a doc or docx file? Any help appreciated!
Hi Ebbelby,
You're welcome!
Happy to help
Regards,
Rahul -
I have attempted to upgrade os4 to os7. At the end, it threw an error that i had to turn off "Find my iphone" on my phone, which seems to be impossible at that stage as i could not access beyond the upgrade screen.
I thin chose to set up as new iphone, but icloud has taken an old expired email address for which i do not know the password. icloud will not recognise my current itunes email and password, so i now have os7 but am unable to restore from my itunes back up.
Desperately need help please... Any help appreciated
ThankyouIf you don't know your password, don't know your security questions and don't have a rescue address or don't receive a reset email, you should contact AppleCare who will initially try to assist you with a reset email or if unsuccessful will pass you to the security team to reset your security questions for you.
If you are in a region that doesn't have international telephone support try contacting Apple through iTunes Store Support. -
I can no longer attach files to my outgoing Hotmail emails. I only receive a message where I would expect the Upload to appear that an error has occurred.
I am using a MacBook Pro with Retina, 2 Ghz Intel Core i7, OS X 10.9.4
I have no difficulty attaching files to the outgoing Hotmails on the same account using my iPhone.
Help appreciated.Thanks for this - not an immediate solution I fear but will keep unplugging stuff and restarting stuff.
To try and be clearer about the problem - I have in the last managed to send attachments successfully. Now I can send and receive plain email messages but get the error message when I try to attach an existing file to an email - not just a particular file but it would appear all files are being treated in the same way.
An experiment to send a mail to which an attachment has failed to upload got the following message alongside the SEND button
Files with errors will be removed from the email and not sent.
- but the mail alone was sent and received successfully. Thanks for any pointers you can give me. -
I am having difficulty downloading purchased tunes in iCloud to my PC. I get error code 5000 and a message "not enough access priviledges" I have checked this out and seem to have full rights. I could download tunes before they put them on iCloud. Any help appreciated.
This refers to permissions on your computer which must have been changed. Start by using Disk Utility to repair permissions. Then do the following:
Reset User Permissions and ACLs in Lion/Mountain Lion
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
From the Utilities menu select Terminal. At the Terminal prompt enter: resetpassword. Press RETURN. When the window opens select your startup drive where it says "Select the volume containing the user account:" At the bottom of the window you will see, "Reset Home folder permissions and ACLs." Click on the Reset button. -
Urgent help needed.....any help appreciated....
q, Design and implement a java class called statistics that computes the mean, median, standard deviation. Design and implement a java application called statisticsDriver that generates a list of 50 integers (generated randomly) and prints the statistical measures which are calculated using the Statistis Class. Assume there will be no more then 50 input values. Compute all statical values as floating values.
The above was the question, and below is what i have done so far for the mean part, but it seems to have errors, any help???
p.s I am also confused what it means by driver class, and do i have to do individual classes for the different statistical measures....please helppppp !!!!!!!!!!, any help would be appreciated...thanks.
The class say Mean contains the following method:
public static double mean(double[] data)
double sum=0.0;
for (int index=0; index sum=sum+data[index];
sum=sum/data.length;
return sum;
The driver for this class:
public static void main(java.lang.String[] args) {
double[] myData={2,5,4,6,7,13};
System.out.println("The mean of myData");
System.out.println(Mena.mean(myData));This is my method to work out the mean,median and mode of a set of numbers.
But what i need to do is find the mean, median and mode from a driver class, which generates a list of random numbers, no more then 50. I don't know where to fit this in my method...please help!!!!!!
main:
public static void main(String[] args) {
int[] mainArray = {2,3,6,6,6};
//outputArray( "Original Array: ",mainArray );
System.out.println("average is " + mean( mainArray ));
System.out.println("median is " + median( mainArray ));
System.out.println("mode is " + mode( mainArray ));
//mean
public static double mean(int[] mainArray) {
int sum = 0;
for (int i = 0; i < mainArray.length; i++) {
sum = sum + mainArray;
double average = sum / mainArray.length;
return average;
//median
public static int median(int[] mainArray) {
//double sortList = sort(mainArray);
final int EVEN_NUMBER_OF_ELEMENTS = 0;
int result = mainArray.length % 2;
int median = 0;
// Definition: Median is the Middle number in an odd number of entries array
// Median is the avg of the two number in the center of an even number array
if (result == EVEN_NUMBER_OF_ELEMENTS) {
int rightNumber = mainArray.length / 2;
int leftNumber = rightNumber - 1;
median = (mainArray[rightNumber] + mainArray[leftNumber]) / 2;
else { // Odd number of items, choose the center one
int rightNumber = mainArray.length / 2;
median = mainArray[rightNumber];
return median;
//mode
public static double mode(int[] mainArray)
int mode = 0;
int elements = 0;
int tempMode = mainArray[0];
int temp = 1;
int x;
for( x = 1; x < mainArray.length; x++)
if(mainArray[x-1] == mainArray[x])
temp++;
else
if(temp > elements)
tempMode = mainArray[x-1];
elements = temp;
temp = 1;
else
temp = 1;
if (temp> elements)
tempMode = mainArray[x-1];
mode = tempMode;
return mode;
any help appreciated.. -
Hi, I have bought a later os from app store but am unable to download it, any help appreciated.
Hi, I have bought a later os from app store but am unable to download it, any help appreciated.
I am using 10.6.8 at the moment and have purchased 10.8. from the App Store.
Went through a long process of registering again, twice, sending in a coded number. To be told that the site is busy at the moment.
Not an easy or a straight forward process, with grammatical errors in the wording of documents.
Hey ho, try again tomorrow, day four.
Thanks for replying. -
I deleted the folder System en Macintosh HD and now when i on my mac it says Disk Error Press Any Key To Restart Please HELP !!
Reinstall Mac OS X.
(59450) -
I was trying to sync my 120GB iPod Classic earlier, and it said it couldn't sync as the iPod disk could not be "read" or "written to." I now can't get anything onto my iPod, and I was wondering if it is a hard drive problem? Any help appreciated. Thanks.
Did you go into iTunes to change the location of your media files? if not you will need to go into iTunes and click on preference and select the advance tab then click the iTunes Media folder location. Select the location of your on external hard drive.
-
I have tried many times to restore my new IPod Touch 5G in I Tunes and it will not allow me to do it. My Ipod will not turn on at all even when on a fresh charge. Only displays the arrow leading up to ITunes logo. I have tried the method of holding the home button and on button and this does not work. Any help appreciated.
My I Pod was working fine until the day I updated the software to 6.0.1.Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar
Maybe you are looking for
-
Publishing Problem with WTP and Tomcat 5.5
Hello you all, I've got the problem that my Eclipse does not publish my Hibernate (*.hbm.xml) files. In the concerning folder, I do only find the .class-files. We're using Eclipse (3.3.2), Maven 2, Tomcat 5.5 Urgend help is needed as we have to distr
-
please i forgot my password and i need to reset my phone. please help me
-
I want to buy an Ipad Mini 2, BUT On my mba
Okay, first time here: I am most interested in getting this Ipad Mini 2 but needed to make sure it does what it should do. After all, it is using the same IOS7 as my Iphone5 and MBA where I have no problems getting closed captioning (CC) on both of
-
:O :O :O Youd better go on vacation, or lease a DELL, ive been without mine for over 2 weeks now. I got my Corsair RAM back within 5 days. TWICE. MSI should at least put a "check RMA status" link on their site. Im feeling pretty boned, and by the
-
Is it advisable or feasible to implement polling mechanism in WAS. My purpose is to ping an external server at regular interval, and also to do query on the database table based on certain criteria at regular interval. Or is there any better design d