Strange behavior after suspend.

Hi,
For some time I have a strange behavior of my system after I awake my computer(after suspend). This problem don't disappear after update.
Ok, so if I suspend my computer, and awake him I can't run any program. Even if i was open some application, this application crashes. I have to restart my machine.
Somebody had similar problem or know how help?
I'm using Arch Linux x64, kernel 3.8, openbox. Suspend by "systemctl suspend".

OK, maybe good idea is paste here my output journal:
# journalctl --since=today | tac | sed -n '/-- Reboot --/{n;:r;/-- Reboot --/q;p;n;b r}' | tac
-- Logs begin at Mon 2012-09-10 20:20:07 CEST, end at Thu 2013-03-28 10:17:18 CET. --
Mar 28 10:10:36 localhost kernel: Freezing user space processes ... (elapsed 0.01 seconds) done.
Mar 28 10:10:36 localhost systemd[1]: Time has been changed
Mar 28 10:10:36 localhost systemd[1]: systemd-tmpfiles-clean.timer: time change, recalculating next elapse.
Mar 28 10:10:36 localhost kernel: Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
Mar 28 10:10:36 localhost dhcpcd[1435]: eth1: carrier lost
Mar 28 10:10:36 localhost kernel: PM: Entering mem sleep
Mar 28 10:10:36 localhost kernel: Suspending console(s) (use no_console_suspend to debug)
Mar 28 10:10:36 localhost kernel: sd 0:0:0:0: [sda] Synchronizing SCSI cache
Mar 28 10:10:36 localhost kernel: sd 0:0:0:0: [sda] Stopping disk
Mar 28 10:10:36 localhost kernel: cfg80211: Calling CRDA for country: PL
Mar 28 10:10:36 localhost kernel: <6>[fglrx] IRQ 46 Disabled
Mar 28 10:10:36 localhost kernel: <6>[fglrx] Preparing suspend fglrx in kernel.
Mar 28 10:10:36 localhost kernel: <6>[fglrx] Suspending fglrx in kernel completed.
Mar 28 10:10:36 localhost kernel: <6>[fglrx] Power down the ASIC .
Mar 28 10:10:36 localhost kernel: PM: suspend of devices complete after 1126.292 msecs
Mar 28 10:10:36 localhost kernel: PM: late suspend of devices complete after 0.263 msecs
Mar 28 10:10:36 localhost kernel: r8169 0000:09:00.0: System wakeup enabled by ACPI
Mar 28 10:10:36 localhost kernel: ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
Mar 28 10:10:36 localhost kernel: PM: noirq suspend of devices complete after 52.988 msecs
Mar 28 10:10:36 localhost kernel: ACPI: Preparing to enter system sleep state S3
Mar 28 10:10:36 localhost kernel: PM: Saving platform NVS memory
Mar 28 10:10:36 localhost kernel: Disabling non-boot CPUs ...
Mar 28 10:10:36 localhost kernel: smpboot: CPU 1 is now offline
Mar 28 10:10:36 localhost kernel: smpboot: CPU 2 is now offline
Mar 28 10:10:36 localhost kernel: smpboot: CPU 3 is now offline
Mar 28 10:10:36 localhost kernel: Extended CMOS year: 2000
Mar 28 10:10:36 localhost kernel: ACPI: Low-level resume complete
Mar 28 10:10:36 localhost kernel: PM: Restoring platform NVS memory
Mar 28 10:10:36 localhost kernel: Extended CMOS year: 2000
Mar 28 10:10:36 localhost kernel: CPU0: Thermal monitoring handled by SMI
Mar 28 10:10:36 localhost kernel: Enabling non-boot CPUs ...
Mar 28 10:10:36 localhost kernel: smpboot: Booting Node 0 Processor 1 APIC 0x4
Mar 28 10:10:36 localhost kernel: CPU1: Thermal monitoring handled by SMI
Mar 28 10:10:36 localhost kernel: CPU1 is up
Mar 28 10:10:36 localhost kernel: smpboot: Booting Node 0 Processor 2 APIC 0x1
Mar 28 10:10:36 localhost kernel: CPU2: Thermal monitoring handled by SMI
Mar 28 10:10:36 localhost kernel: CPU2 is up
Mar 28 10:10:36 localhost kernel: smpboot: Booting Node 0 Processor 3 APIC 0x5
Mar 28 10:10:36 localhost kernel: CPU3: Thermal monitoring handled by SMI
Mar 28 10:10:36 localhost kernel: CPU3 is up
Mar 28 10:10:36 localhost kernel: ACPI: Waking up from system sleep state S3
Mar 28 10:10:36 localhost kernel: ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
Mar 28 10:10:36 localhost kernel: sdhci-pci 0000:07:00.0: MMC controller base frequency changed to 50Mhz.
Mar 28 10:10:36 localhost kernel: sdhci-pci 0000:07:00.0: proprietary Ricoh MMC controller disabled (via firewire function)
Mar 28 10:10:36 localhost kernel: sdhci-pci 0000:07:00.0: MMC cards are now supported by standard SDHCI controller
Mar 28 10:10:36 localhost kernel: PM: noirq resume of devices complete after 133.780 msecs
Mar 28 10:10:36 localhost kernel: PM: early resume of devices complete after 0.127 msecs
Mar 28 10:10:36 localhost kernel: ehci-pci 0000:00:1a.0: setting latency timer to 64
Mar 28 10:10:36 localhost kernel: mei 0000:00:16.0: irq 43 for MSI/MSI-X
Mar 28 10:10:36 localhost kernel: snd_hda_intel 0000:00:1b.0: irq 44 for MSI/MSI-X
Mar 28 10:10:36 localhost kernel: pci 0000:00:1e.0: setting latency timer to 64
Mar 28 10:10:36 localhost kernel: ehci-pci 0000:00:1d.0: setting latency timer to 64
Mar 28 10:10:36 localhost kernel: ahci 0000:00:1f.2: setting latency timer to 64
Mar 28 10:10:36 localhost kernel: snd_hda_intel 0000:02:00.1: irq 45 for MSI/MSI-X
Mar 28 10:10:36 localhost kernel: r8169 0000:09:00.0: System wakeup disabled by ACPI
Mar 28 10:10:36 localhost kernel: <6>[fglrx] Power up the ASIC
Mar 28 10:10:36 localhost kernel: <6>[fglrx] Preparing resume fglrx in kernel.
Mar 28 10:10:36 localhost kernel: Extended CMOS year: 2000
Mar 28 10:10:36 localhost kernel: <6>[fglrx] Resuming fglrx in kernel completed.
Mar 28 10:10:36 localhost kernel: <6>[fglrx] IRQ 46 Enabled
Mar 28 10:10:36 localhost kernel: ata5: SATA link down (SStatus 0 SControl 300)
Mar 28 10:10:36 localhost kernel: ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
Mar 28 10:10:36 localhost kernel: ata2.00: configured for UDMA/100
Mar 28 10:10:36 localhost kernel: usb 2-1.3: reset low-speed USB device number 3 using ehci-pci
Mar 28 10:10:36 localhost kernel: sdhci-pci 0000:07:00.0: Will use DMA mode even though HW doesn't fully claim to support it.
Mar 28 10:10:36 localhost kernel: firewire_core 0000:07:00.3: rediscovered device fw0
Mar 28 10:10:36 localhost kernel: usb 1-1.4: reset high-speed USB device number 3 using ehci-pci
Mar 28 10:10:36 localhost kernel: ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
Mar 28 10:10:36 localhost kernel: ata1.00: configured for UDMA/133
Mar 28 10:10:36 localhost kernel: sd 0:0:0:0: [sda] Starting disk
Mar 28 10:10:36 localhost kernel: PM: resume of devices complete after 2478.795 msecs
Mar 28 10:10:36 localhost kernel: PM: Finishing wakeup.
Mar 28 10:10:36 localhost kernel: Restarting tasks ... done.
Mar 28 10:10:36 localhost kernel: video LNXVIDEO:00: Restoring backlight state
Mar 28 10:10:36 localhost slim[806]: Conky: can't open /sys/class/power_supply/BAT0/uevent: No such file or directory
Mar 28 10:10:36 localhost slim[806]: Conky: can't open /proc/acpi/battery/BAT0/state: No such file or directory
Mar 28 10:10:36 localhost systemd-sleep[4208]: System resumed.
Mar 28 10:10:36 localhost dbus-daemon[800]: dbus[800]: [system] Activating via systemd: service name='org.freedesktop.UPower' unit='upower.service'
Mar 28 10:10:36 localhost dbus[800]: [system] Activating via systemd: service name='org.freedesktop.UPower' unit='upower.service'
Mar 28 10:10:36 localhost su[4307]: (to root) root on none
Mar 28 10:10:36 localhost su[4307]: pam_unix(su:session): session opened for user root by (uid=0)
Mar 28 10:10:36 localhost systemd[1]: Starting Daemon for power management...
Mar 28 10:10:36 localhost su[4307]: pam_unix(su:session): session closed for user root
Mar 28 10:10:36 localhost su[4328]: (to root) root on none
Mar 28 10:10:36 localhost su[4328]: pam_unix(su:session): session opened for user root by (uid=0)
Mar 28 10:10:36 localhost su[4328]: pam_unix(su:session): session closed for user root
Mar 28 10:10:36 localhost systemd[1]: Started Suspend.
Mar 28 10:10:36 localhost systemd[1]: Service sleep.target is not needed anymore. Stopping.
Mar 28 10:10:36 localhost systemd[1]: Stopping Sleep.
Mar 28 10:10:36 localhost systemd[1]: Stopped target Sleep.
Mar 28 10:10:36 localhost systemd[1]: Starting Suspend.
Mar 28 10:10:36 localhost systemd[1]: Reached target Suspend.
Mar 28 10:10:36 localhost systemd-logind[796]: Operation finished.
Mar 28 10:10:36 localhost laptop-mode[4441]: Laptop mode
Mar 28 10:10:36 localhost laptop-mode[4446]: enabled, active [unchanged]
Mar 28 10:10:36 localhost logger[4463]: ACPI action undefined: ACPI0003:00
Mar 28 10:10:36 localhost laptop-mode[4501]: Laptop mode
Mar 28 10:10:36 localhost laptop-mode[4509]: enabled, active [unchanged]
Mar 28 10:10:36 localhost laptop-mode[4534]: Laptop mode
Mar 28 10:10:36 localhost laptop-mode[4539]: enabled, active [unchanged]
Mar 28 10:10:36 localhost laptop-mode[4554]: Laptop mode
Mar 28 10:10:36 localhost laptop-mode[4557]: enabled, active [unchanged]
Mar 28 10:10:36 localhost laptop-mode[4562]: Laptop mode
Mar 28 10:10:36 localhost laptop-mode[4563]: enabled, active [unchanged]
Mar 28 10:10:36 localhost dbus-daemon[800]: dbus[800]: [system] Successfully activated service 'org.freedesktop.UPower'
Mar 28 10:10:36 localhost dbus[800]: [system] Successfully activated service 'org.freedesktop.UPower'
Mar 28 10:10:36 localhost systemd[1]: Started Daemon for power management.
Mar 28 10:10:37 localhost ntpd[1442]: Deleting interface #3 eth1, 192.168.1.6#123, interface stats: received=135, sent=135, dropped=1, active_time=4197 secs
Mar 28 10:10:37 localhost ntpd[1442]: 149.156.70.60 interface 192.168.1.6 -> (none)
Mar 28 10:10:37 localhost ntpd[1442]: 149.156.24.40 interface 192.168.1.6 -> (none)
Mar 28 10:10:37 localhost ntpd[1442]: 46.250.172.2 interface 192.168.1.6 -> (none)
Mar 28 10:10:37 localhost ntpd[1442]: peers refreshed
Mar 28 10:10:38 localhost su[4624]: (to root) root on none
Mar 28 10:10:38 localhost su[4624]: pam_unix(su:session): session opened for user root by (uid=0)
Mar 28 10:10:38 localhost laptop-mode[4653]: Laptop mode
Mar 28 10:10:38 localhost laptop-mode[4654]: enabled, active [unchanged]
Mar 28 10:10:38 localhost dhcpcd[1435]: eth1: carrier acquired
Mar 28 10:10:38 localhost dhcpcd[1435]: eth1: sending IPv6 Router Solicitation
Mar 28 10:10:38 localhost dhcpcd[1435]: eth1: rebinding lease of 192.168.1.6
Mar 28 10:10:38 localhost dhcpcd[1435]: eth1: acknowledged 192.168.1.6 from 192.168.1.1 `TP-LINK'
Mar 28 10:10:38 localhost dhcpcd[1435]: eth1: checking for 192.168.1.6
Mar 28 10:10:38 localhost su[4624]: pam_unix(su:session): session closed for user root
Mar 28 10:10:38 localhost su[4660]: (to root) root on none
Mar 28 10:10:38 localhost su[4660]: pam_unix(su:session): session opened for user root by (uid=0)
Mar 28 10:10:38 localhost su[4660]: pam_unix(su:session): session closed for user root
Mar 28 10:10:38 localhost kernel: EXT4-fs (sda6): re-mounted. Opts: commit=0
Mar 28 10:10:38 localhost kernel: EXT4-fs (sda7): re-mounted. Opts: commit=0
Mar 28 10:10:38 localhost laptop-mode[4694]: Laptop mode
Mar 28 10:10:38 localhost laptop-mode[4695]: enabled, active [unchanged]
Mar 28 10:10:38 localhost logger[4698]: ACPI action undefined: ACPI0003:00
Mar 28 10:10:38 localhost slim[806]: tint2 : invalid option "task_margin",
Mar 28 10:10:38 localhost slim[806]: upgrade tint2 or correct your config file
Mar 28 10:10:38 localhost slim[806]: tint2 : nb monitor 1, nb monitor used 1, nb desktop 1
Mar 28 10:10:38 localhost slim[806]: X Error of failed request: BadWindow (invalid Window parameter)
Mar 28 10:10:38 localhost slim[806]: Major opcode of failed request: 21 (X_ListProperties)
Mar 28 10:10:38 localhost slim[806]: Resource id in failed request: 0x18000b0
Mar 28 10:10:38 localhost slim[806]: Serial number of failed request: 12
Mar 28 10:10:38 localhost slim[806]: Current serial number in output stream: 12
Mar 28 10:10:40 localhost slim[806]: you have no weather alerts
Mar 28 10:10:40 localhost slim[806]: processing complete
Mar 28 10:10:40 localhost slim[806]: gathering data with curl
Mar 28 10:10:40 localhost slim[806]: % Total % Received % Xferd Average Speed Time Time Time Current
Mar 28 10:10:40 localhost slim[806]: Dload Upload Total Spent Left Speed
Mar 28 10:10:40 localhost slim[806]: 0 0 0 0 0 0 0 0 --:--:-- --:--:-- --:--:-- 0curl: (6) Could not resolve host: (nil); Unknown error
Mar 28 10:10:40 localhost slim[806]: not checking for alerts
Mar 28 10:10:40 localhost slim[806]: curl attempt timed out, trying again
Mar 28 10:10:40 localhost slim[806]: % Total % Received % Xferd Average Speed Time Time Time Current
Mar 28 10:10:40 localhost slim[806]: Dload Upload Total Spent Left Speed
Mar 28 10:10:40 localhost slim[806]: 0 0 0 0 0 0 0 0 --:--:-- --:--:-- --:--:-- 0curl: (6) Could not resolve host: (nil); Unknown error
Mar 28 10:10:42 localhost dhcpcd[1435]: eth1: sending IPv6 Router Solicitation
Mar 28 10:10:43 localhost dhcpcd[1435]: eth1: leased 192.168.1.6 for 259200 seconds
Mar 28 10:10:45 dhcppc4 ntpd[1442]: Listen normally on 6 eth1 192.168.1.6 UDP 123
Mar 28 10:10:45 dhcppc4 ntpd[1442]: peers refreshed
Mar 28 10:10:45 dhcppc4 ntpd[1442]: new interface(s) found: waking up resolver
Mar 28 10:10:45 dhcppc4 slim[806]: Traceback (most recent call last):
Mar 28 10:10:45 dhcppc4 slim[806]: File "/home/rlk120/.scripts/gmail.py", line 9, in <module>
Mar 28 10:10:45 dhcppc4 slim[806]: msg=temp.read()
Mar 28 10:10:45 dhcppc4 slim[806]: File "/usr/lib/python3.3/encodings/ascii.py", line 26, in decode
Mar 28 10:10:45 dhcppc4 slim[806]: return codecs.ascii_decode(input, self.errors)[0]
Mar 28 10:10:45 dhcppc4 slim[806]: UnicodeDecodeError: 'ascii' codec can't decode byte 0xc5 in position 375: ordinal not in range(128)
Mar 28 10:10:45 dhcppc4 slim[806]: not checking for alerts
Mar 28 10:10:45 dhcppc4 slim[806]: curl attempt timed out, trying again
Mar 28 10:10:45 dhcppc4 slim[806]: % Total % Received % Xferd Average Speed Time Time Time Current
Mar 28 10:10:45 dhcppc4 slim[806]: Dload Upload Total Spent Left Speed
Mar 28 10:10:46 dhcppc4 slim[806]: [234B blob data]
Mar 28 10:10:46 dhcppc4 dhcpcd[1435]: eth1: sending IPv6 Router Solicitation
Mar 28 10:10:50 dhcppc4 dhcpcd[1435]: eth1: sending IPv6 Router Solicitation
Mar 28 10:10:50 dhcppc4 dhcpcd[1435]: eth1: no IPv6 Routers available
Mar 28 10:11:03 dhcppc4 slim[806]: No protocol specified
Mar 28 10:11:03 dhcppc4 slim[806]: (chromium:4750): Gtk-WARNING **: cannot open display: :0.0
Mar 28 10:11:31 dhcppc4 systemd-logind[796]: System is rebooting.
Mar 28 10:11:32 dhcppc4 systemd[1]: Deactivating swap /dev/sda8...
Mar 28 10:11:32 dhcppc4 systemd[1]: Deactivating swap /dev/sda8...
Mar 28 10:11:32 dhcppc4 systemd[1]: Deactivating swap /dev/sda8...
Mar 28 10:11:32 dhcppc4 systemd[1]: Stopping Sound Card.
Mar 28 10:11:32 dhcppc4 systemd[1]: Stopped target Sound Card.
Mar 28 10:11:32 dhcppc4 systemd[1]: Stopping Daemon for power management...
Mar 28 10:11:32 dhcppc4 systemd[1]: Stopping Authorization Manager...
Mar 28 10:11:32 dhcppc4 systemd[1]: Stopping Graphical Interface.
Mar 28 10:11:32 dhcppc4 systemd[1]: Stopped target Graphical Interface.
Mar 28 10:11:32 dhcppc4 systemd[1]: Stopping Multi-User.
Mar 28 10:11:32 dhcppc4 systemd[1]: Stopped target Multi-User.
Mar 28 10:11:32 dhcppc4 systemd[1]: Stopping ACPI event daemon...
Mar 28 10:11:32 dhcppc4 ntpd[1442]: ntpd exiting on signal 15
Mar 28 10:11:32 dhcppc4 acpid[793]: exiting
Mar 28 10:11:32 dhcppc4 dhcpcd[4810]: sending signal 1 to pid 1435
Mar 28 10:11:32 dhcppc4 dhcpcd[4810]: waiting for pid 1435 to exit
Mar 28 10:11:32 dhcppc4 dhcpcd[1435]: received SIGHUP, releasing
Mar 28 10:11:32 dhcppc4 dhcpcd[1435]: eth1: releasing lease of 192.168.1.6
Mar 28 10:11:32 dhcppc4 dhcpcd[1435]: eth1: removing interface
Mar 28 10:11:33 dhcppc4 slim[806]: Conky: received SIGHUP or SIGUSR1. reloading the config file.
Mar 28 10:11:33 dhcppc4 slim[806]: XIO: fatal IO error 11 (Resource temporarily unavailable) on X server ":0.0"
Mar 28 10:11:33 dhcppc4 slim[806]: after 200200 requests (200197 known processed) with 0 events remaining.
Mar 28 10:11:33 dhcppc4 slim[806]: Conky: received SIGHUP or SIGUSR1. reloading the config file.
Mar 28 10:11:33 dhcppc4 slim[806]: XIO: fatal IO error 4 (Interrupted system call) on X server ":0.0"
Mar 28 10:11:33 dhcppc4 slim[806]: after 226 requests (226 known processed) with 0 events remaining.
Mar 28 10:11:33 dhcppc4 slim[806]: real transparency off.... depth: 24
Mar 28 10:11:33 dhcppc4 slim[806]: xRandr: Found crtc's: 4
Mar 28 10:11:33 dhcppc4 slim[806]: xRandr: Linking output LVDS with crtc 0
Mar 28 10:11:33 dhcppc4 slim[806]: real transparency off.... depth: 24
Mar 28 10:11:33 dhcppc4 slim[806]: xRandr: Found crtc's: 4
Mar 28 10:11:33 dhcppc4 slim[806]: xRandr: Linking output LVDS with crtc 0
Mar 28 10:11:33 dhcppc4 slim[806]: XIO: fatal IO error 11 (Resource temporarily unavailable) on X server ":0.0"
Mar 28 10:11:33 dhcppc4 slim[806]: after 534585 requests (534585 known processed) with 0 events remaining.
Mar 28 10:11:33 dhcppc4 slim[806]: XIO: fatal IO error 11 (Resource temporarily unavailable) on X server ":0.0"
Mar 28 10:11:33 dhcppc4 slim[806]: after 163909 requests (163909 known processed) with 0 events remaining.
Mar 28 10:11:33 dhcppc4 slim[806]: you have no weather alerts
Mar 28 10:11:33 dhcppc4 slim[806]: processing complete
Mar 28 10:11:33 dhcppc4 kernel: cfg80211: Calling CRDA to update world regulatory domain
Mar 28 10:11:33 dhcppc4 kernel: IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
Mar 28 10:11:33 dhcppc4 netcfg-daemon[4777]: :: siec_domowa down [done]
Mar 28 10:11:33 dhcppc4 slim[806]: Server terminated successfully (0). Closing log file.
Mar 28 10:11:33 dhcppc4 laptop-mode[4865]: Laptop mode
Mar 28 10:11:33 dhcppc4 laptop-mode[4866]: enabled, active [unchanged]
Mar 28 10:11:34 dhcppc4 systemd[1]: slim.service: main process exited, code=exited, status=1/FAILURE
Mar 28 10:11:34 dhcppc4 systemd[1]: Stopped SLiM Simple Login Manager.
Mar 28 10:11:34 dhcppc4 systemd[1]: Unit slim.service entered failed state
Mar 28 10:11:34 dhcppc4 systemd[1]: Stopping Permit User Sessions...
Mar 28 10:11:34 dhcppc4 systemd[1]: Stopped Permit User Sessions.
Mar 28 10:11:34 dhcppc4 systemd[1]: Stopping Basic System.
Mar 28 10:11:34 dhcppc4 systemd[1]: Stopped target Basic System.
Mar 28 10:11:34 dhcppc4 systemd[1]: Stopping Dispatch Password Requests to Console Directory Watch.
Mar 28 10:11:34 dhcppc4 systemd[1]: Stopped Dispatch Password Requests to Console Directory Watch.
Mar 28 10:11:34 dhcppc4 systemd[1]: Stopping Forward Password Requests to Wall Directory Watch.
Mar 28 10:11:34 dhcppc4 systemd[1]: Stopped Forward Password Requests to Wall Directory Watch.
Mar 28 10:11:34 dhcppc4 systemd[1]: Stopping Daily Cleanup of Temporary Directories.
Mar 28 10:11:34 dhcppc4 systemd[1]: Stopped Daily Cleanup of Temporary Directories.
Mar 28 10:11:34 dhcppc4 systemd[1]: Stopping Sockets.
Mar 28 10:11:34 dhcppc4 systemd[1]: Stopped target Sockets.
Mar 28 10:11:34 dhcppc4 systemd[1]: Stopping LVM2 metadata daemon socket.
Mar 28 10:11:34 dhcppc4 systemd[1]: Closed LVM2 metadata daemon socket.
Mar 28 10:11:34 dhcppc4 systemd[1]: Stopping Device-mapper event daemon FIFOs.
Mar 28 10:11:34 dhcppc4 systemd[1]: Closed Device-mapper event daemon FIFOs.
Mar 28 10:11:34 dhcppc4 systemd[1]: Stopping Syslog Socket.
Mar 28 10:11:34 dhcppc4 systemd[1]: Closed Syslog Socket.
Mar 28 10:11:34 dhcppc4 systemd[1]: Stopping ACPID Listen Socket.
Mar 28 10:11:34 dhcppc4 systemd[1]: Closed ACPID Listen Socket.
Mar 28 10:11:34 dhcppc4 systemd[1]: Stopping D-Bus System Message Bus Socket.
Mar 28 10:11:34 dhcppc4 systemd[1]: Closed D-Bus System Message Bus Socket.
Mar 28 10:11:34 dhcppc4 systemd[1]: Stopping System Initialization.
Mar 28 10:11:34 dhcppc4 systemd[1]: Stopped target System Initialization.
Mar 28 10:11:34 dhcppc4 systemd[1]: Stopping Load Kernel Modules...
Mar 28 10:11:34 dhcppc4 systemd[1]: Stopped Load Kernel Modules.
Mar 28 10:11:34 dhcppc4 systemd[1]: Stopping Apply Kernel Variables...
Mar 28 10:11:34 dhcppc4 systemd[1]: Stopped Apply Kernel Variables.
Mar 28 10:11:34 dhcppc4 systemd[1]: Stopping Setup Virtual Console...
Mar 28 10:11:35 dhcppc4 systemd[1]: Stopped Setup Virtual Console.
Mar 28 10:11:35 dhcppc4 systemd[1]: Stopping Set Up Additional Binary Formats...
Mar 28 10:11:35 dhcppc4 systemd[1]: Stopped Set Up Additional Binary Formats.
Mar 28 10:11:35 dhcppc4 systemd[1]: Stopping Encrypted Volumes.
Mar 28 10:11:35 dhcppc4 systemd[1]: Stopped target Encrypted Volumes.
Mar 28 10:11:35 dhcppc4 systemd[1]: Stopping Swap.
Mar 28 10:11:35 dhcppc4 systemd[1]: Stopped target Swap.
Mar 28 10:11:35 dhcppc4 systemd[1]: Stopping Local File Systems.
Mar 28 10:11:35 dhcppc4 systemd[1]: Stopped target Local File Systems.
Mar 28 10:11:35 dhcppc4 systemd[1]: Unmounting /home...
Mar 28 10:11:35 dhcppc4 systemd[1]: Unmounting /tmp...
Mar 28 10:11:35 dhcppc4 systemd[1]: Stopping Remote File Systems.
Mar 28 10:11:35 dhcppc4 systemd[1]: Stopped target Remote File Systems.
Mar 28 10:11:35 dhcppc4 systemd[1]: Unmounted /tmp.
Mar 28 10:11:35 dhcppc4 systemd[1]: Unmounted /home.
Mar 28 10:11:35 dhcppc4 systemd[1]: Starting Unmount All Filesystems.
Mar 28 10:11:35 dhcppc4 systemd[1]: Reached target Unmount All Filesystems.
Mar 28 10:11:35 dhcppc4 systemd[1]: Stopping Local File Systems (Pre).
Mar 28 10:11:35 dhcppc4 systemd[1]: Stopped target Local File Systems (Pre).
Mar 28 10:11:35 dhcppc4 systemd[1]: Stopping Remount Root and Kernel File Systems...
Mar 28 10:11:35 dhcppc4 systemd[1]: Stopped Remount Root and Kernel File Systems.
Mar 28 10:11:35 dhcppc4 systemd[1]: Starting Shutdown.
Mar 28 10:11:35 dhcppc4 systemd[1]: Reached target Shutdown.
Mar 28 10:11:35 dhcppc4 systemd[1]: Starting Save Random Seed...
Mar 28 10:11:35 dhcppc4 systemd[1]: Starting Update UTMP about System Shutdown...
Mar 28 10:11:35 dhcppc4 systemd[1]: Started Save Random Seed.
Mar 28 10:11:35 dhcppc4 systemd[1]: Started Update UTMP about System Shutdown.
Mar 28 10:11:35 dhcppc4 systemd[1]: Starting Final Step.
Mar 28 10:11:35 dhcppc4 systemd[1]: Reached target Final Step.
Mar 28 10:11:35 dhcppc4 systemd[1]: Starting Reboot...
Mar 28 10:11:35 dhcppc4 systemd[1]: Shutting down.
Mar 28 10:11:35 dhcppc4 systemd[1]: Hardware watchdog 'iTCO_wdt', version 0
Mar 28 10:11:35 dhcppc4 systemd[1]: Set hardware watchdog to 10min.
Mar 28 10:11:35 dhcppc4 kernel: watchdog watchdog0: watchdog did not stop!
Mar 28 10:11:35 dhcppc4 systemd-journal[131]: Journal stopped
Somebody probably find interesting things in this code.
And here is some fail slim:
# journalctl /usr/lib/systemd/systemd --since=today
-- Logs begin at Mon 2012-09-10 20:20:07 CEST, end at Thu 2013-03-28 10:37:18 CET. --
Mar 28 10:10:36 localhost systemd[1]: Time has been changed
Mar 28 10:10:36 localhost systemd[1]: systemd-tmpfiles-clean.timer: time change, recalculating next elapse.
Mar 28 10:10:36 localhost systemd[1]: Starting Daemon for power management...
Mar 28 10:10:36 localhost systemd[1]: Started Suspend.
Mar 28 10:10:36 localhost systemd[1]: Service sleep.target is not needed anymore. Stopping.
Mar 28 10:10:36 localhost systemd[1]: Stopping Sleep.
Mar 28 10:10:36 localhost systemd[1]: Stopped target Sleep.
Mar 28 10:10:36 localhost systemd[1]: Starting Suspend.
Mar 28 10:10:36 localhost systemd[1]: Reached target Suspend.
Mar 28 10:10:36 localhost systemd[1]: Started Daemon for power management.
Mar 28 10:11:32 dhcppc4 systemd[1]: Deactivating swap /dev/sda8...
Mar 28 10:11:32 dhcppc4 systemd[1]: Deactivating swap /dev/sda8...
Mar 28 10:11:32 dhcppc4 systemd[1]: Deactivating swap /dev/sda8...
Mar 28 10:11:32 dhcppc4 systemd[1]: Stopping Sound Card.
Mar 28 10:11:32 dhcppc4 systemd[1]: Stopped target Sound Card.
Mar 28 10:11:32 dhcppc4 systemd[1]: Stopping Daemon for power management...
Mar 28 10:11:32 dhcppc4 systemd[1]: Stopping Authorization Manager...
Mar 28 10:11:32 dhcppc4 systemd[1]: Stopping Graphical Interface.
Mar 28 10:11:32 dhcppc4 systemd[1]: Stopped target Graphical Interface.
Mar 28 10:11:32 dhcppc4 systemd[1]: Stopping Multi-User.
Mar 28 10:11:32 dhcppc4 systemd[1]: Stopped target Multi-User.
Mar 28 10:11:32 dhcppc4 systemd[1]: Stopping ACPI event daemon...
Mar 28 10:11:34 dhcppc4 systemd[1]: slim.service: main process exited, code=exited, status=1/FAILURE
Mar 28 10:11:34 dhcppc4 systemd[1]: Stopped SLiM Simple Login Manager.
Mar 28 10:11:34 dhcppc4 systemd[1]: Unit slim.service entered failed state
Mar 28 10:11:34 dhcppc4 systemd[1]: Stopping Permit User Sessions...
Mar 28 10:11:34 dhcppc4 systemd[1]: Stopped Permit User Sessions.
Mar 28 10:11:34 dhcppc4 systemd[1]: Stopping Basic System.
Mar 28 10:11:34 dhcppc4 systemd[1]: Stopped target Basic System.
Mar 28 10:11:34 dhcppc4 systemd[1]: Stopping Dispatch Password Requests to Console Directory Watch.
Mar 28 10:11:34 dhcppc4 systemd[1]: Stopped Dispatch Password Requests to Console Directory Watch.
Mar 28 10:11:34 dhcppc4 systemd[1]: Stopping Forward Password Requests to Wall Directory Watch.
Mar 28 10:11:34 dhcppc4 systemd[1]: Stopped Forward Password Requests to Wall Directory Watch.
Mar 28 10:11:34 dhcppc4 systemd[1]: Stopping Daily Cleanup of Temporary Directories.
Mar 28 10:11:34 dhcppc4 systemd[1]: Stopped Daily Cleanup of Temporary Directories.
Mar 28 10:11:34 dhcppc4 systemd[1]: Stopping Sockets.
Mar 28 10:11:34 dhcppc4 systemd[1]: Stopped target Sockets.
Mar 28 10:11:34 dhcppc4 systemd[1]: Stopping LVM2 metadata daemon socket.
Mar 28 10:11:34 dhcppc4 systemd[1]: Closed LVM2 metadata daemon socket.
Mar 28 10:11:34 dhcppc4 systemd[1]: Stopping Device-mapper event daemon FIFOs.
Mar 28 10:11:34 dhcppc4 systemd[1]: Closed Device-mapper event daemon FIFOs.
Mar 28 10:11:34 dhcppc4 systemd[1]: Stopping Syslog Socket.
Mar 28 10:11:34 dhcppc4 systemd[1]: Closed Syslog Socket.
Mar 28 10:11:34 dhcppc4 systemd[1]: Stopping ACPID Listen Socket.
Mar 28 10:11:34 dhcppc4 systemd[1]: Closed ACPID Listen Socket.
Mar 28 10:11:34 dhcppc4 systemd[1]: Stopping D-Bus System Message Bus Socket.
Mar 28 10:11:34 dhcppc4 systemd[1]: Closed D-Bus System Message Bus Socket.
Mar 28 10:11:34 dhcppc4 systemd[1]: Stopping System Initialization.
Mar 28 10:11:34 dhcppc4 systemd[1]: Stopped target System Initialization.
Mar 28 10:11:34 dhcppc4 systemd[1]: Stopping Load Kernel Modules...
Mar 28 10:11:34 dhcppc4 systemd[1]: Stopped Load Kernel Modules.
Mar 28 10:11:34 dhcppc4 systemd[1]: Stopping Apply Kernel Variables...
Mar 28 10:11:34 dhcppc4 systemd[1]: Stopped Apply Kernel Variables.
Mar 28 10:11:34 dhcppc4 systemd[1]: Stopping Setup Virtual Console...
Mar 28 10:11:35 dhcppc4 systemd[1]: Stopped Setup Virtual Console.
Mar 28 10:11:35 dhcppc4 systemd[1]: Stopping Set Up Additional Binary Formats...
Mar 28 10:11:35 dhcppc4 systemd[1]: Stopped Set Up Additional Binary Formats.
Mar 28 10:11:35 dhcppc4 systemd[1]: Stopping Encrypted Volumes.
Mar 28 10:11:35 dhcppc4 systemd[1]: Stopped target Encrypted Volumes.
Mar 28 10:11:35 dhcppc4 systemd[1]: Stopping Swap.
Mar 28 10:11:35 dhcppc4 systemd[1]: Stopped target Swap.
Mar 28 10:11:35 dhcppc4 systemd[1]: Stopping Local File Systems.
Mar 28 10:11:35 dhcppc4 systemd[1]: Stopped target Local File Systems.
Mar 28 10:11:35 dhcppc4 systemd[1]: Unmounting /home...
Mar 28 10:11:35 dhcppc4 systemd[1]: Unmounting /tmp...
Mar 28 10:11:35 dhcppc4 systemd[1]: Stopping Remote File Systems.
Mar 28 10:11:35 dhcppc4 systemd[1]: Stopped target Remote File Systems.
Mar 28 10:11:35 dhcppc4 systemd[1]: Unmounted /tmp.
Mar 28 10:11:35 dhcppc4 systemd[1]: Unmounted /home.
Mar 28 10:11:35 dhcppc4 systemd[1]: Starting Unmount All Filesystems.
Mar 28 10:11:35 dhcppc4 systemd[1]: Reached target Unmount All Filesystems.
Mar 28 10:11:35 dhcppc4 systemd[1]: Stopping Local File Systems (Pre).
Mar 28 10:11:35 dhcppc4 systemd[1]: Stopped target Local File Systems (Pre).
Mar 28 10:11:35 dhcppc4 systemd[1]: Stopping Remount Root and Kernel File Systems...
Mar 28 10:11:35 dhcppc4 systemd[1]: Stopped Remount Root and Kernel File Systems.
Mar 28 10:11:35 dhcppc4 systemd[1]: Starting Shutdown.
Mar 28 10:11:35 dhcppc4 systemd[1]: Reached target Shutdown.
Mar 28 10:11:35 dhcppc4 systemd[1]: Starting Save Random Seed...
Mar 28 10:11:35 dhcppc4 systemd[1]: Starting Update UTMP about System Shutdown...
Mar 28 10:11:35 dhcppc4 systemd[1]: Started Save Random Seed.
Mar 28 10:11:35 dhcppc4 systemd[1]: Started Update UTMP about System Shutdown.
Mar 28 10:11:35 dhcppc4 systemd[1]: Starting Final Step.
Mar 28 10:11:35 dhcppc4 systemd[1]: Reached target Final Step.
Mar 28 10:11:35 dhcppc4 systemd[1]: Starting Reboot...
Mar 28 10:11:35 dhcppc4 systemd[1]: Shutting down.
Mar 28 10:11:35 dhcppc4 systemd[1]: Hardware watchdog 'iTCO_wdt', version 0
Mar 28 10:11:35 dhcppc4 systemd[1]: Reached target Unmount All Filesystems.
Mar 28 10:11:35 dhcppc4 systemd[1]: Stopping Local File Systems (Pre).
Mar 28 10:11:35 dhcppc4 systemd[1]: Stopped target Local File Systems (Pre).
Mar 28 10:11:35 dhcppc4 systemd[1]: Stopping Remount Root and Kernel File Systems...
Mar 28 10:11:35 dhcppc4 systemd[1]: Stopped Remount Root and Kernel File Systems.
Mar 28 10:11:35 dhcppc4 systemd[1]: Starting Shutdown.
Mar 28 10:11:35 dhcppc4 systemd[1]: Reached target Shutdown.
Mar 28 10:11:35 dhcppc4 systemd[1]: Starting Save Random Seed...
Mar 28 10:11:35 dhcppc4 systemd[1]: Starting Update UTMP about System Shutdown...
Mar 28 10:11:35 dhcppc4 systemd[1]: Started Save Random Seed.
Mar 28 10:11:35 dhcppc4 systemd[1]: Started Update UTMP about System Shutdown.
Mar 28 10:11:35 dhcppc4 systemd[1]: Starting Final Step.
Mar 28 10:11:35 dhcppc4 systemd[1]: Reached target Final Step.
Mar 28 10:11:35 dhcppc4 systemd[1]: Starting Reboot...
Mar 28 10:11:35 dhcppc4 systemd[1]: Shutting down.
Mar 28 10:11:35 dhcppc4 systemd[1]: Hardware watchdog 'iTCO_wdt', version 0
Mar 28 10:11:35 dhcppc4 systemd[1]: Set hardware watchdog to 10min.
Last edited by xorgx3 (2013-03-28 10:52:08)

Similar Messages

  • Strange behavior after using NIK plug-ins

    Every once in a while I encounter this strange behavior of Aperture. I first process the NEF's in Aperture (white balance, Exposure, Enhance... and, when needed, Cropping) and then I fine tune the image with the NIK plug-ins; when needed DfIne 2.0, Viveza, Color Efex Pro 3.0 and Sharpener Pro 3.0 Output Sharpener.
    If I look at the processed picture then, I get a perfect presentation of the photo;
    !http://users.skynet.be/fc419085/Aperture-1.jpg!
    But when I press Z to zoom into a 100% preview I get this;
    !http://users.skynet.be/fc419085/Aperture-2.jpg!
    When I select the Loup in the normal view mode I get this;
    !http://users.skynet.be/fc419085/Aperture-3.jpg!
    This doesn't happen with all my pictures, yesterday I processed a series of 8 pictures an 6 of them showed this behavior the other two acted normal and I can't see what I did differently whit these last two.
    When I export the strangely behaving photo's to a Tiff or a Jpeg, I get perfectly normal pictures.
    The original NEF behaves normal. I have seen this behavior with NEF's from a Nikon D200, D2x and a D300. I have Aperture 2.1.2 running on a 2.33 GHz Intel Core Duo MacBook Pro running Mac OS X 10.5.6
    Does anybody know what's happening and if so, how to solve this problem?
    Cheers,
    Ivan

    I did some testing and what I found is too weird to be true.
    First this mashed up look doesn't only happen after using NIK plug-ins, it also happens when making a roundtrip to Photoshop, given that certain conditions are met.
    Give it a try yourself. Crop an image to an uneven pixelcount dimension, for example 4227 x 2797 and make a roundtrip to Photoshop. Then have a 100% view look at the new image in Aperture. You'll have a mashed up view, at least I do.
    Now crop the same original image to an even pixelcount dimension, for example 4228 x 2798 and make an roundtrip to Photoshop once more. When you have a 100% view of the new image now, you'll see a perfectly normal photo.
    Do you think Aperture developers are reading this forum?

  • SQL strange behavior after 11g upgrade

    Hi all,
    After upgrading from 10.2.0.3 to 11.2.0.1 (64-bit RedHat), one of my SQLs behaves very strangely.
    These are the facts:
    - This is upgrade evaluation phase in 'lab' environment
    - First run (after db restart) returns results very quickly (acceptable 0.4 secs)
    - Every consecutive run is very slow (3-4 minutes)
    - Explain Plan did NOT change between runs;
    - Number of 'consistent gets' changed drastically (from few thousands to few millions) ...which would usually lead to inefficient data access plan (index), but again, the explain plan did not change!
    - If I flush shared_pool, next run is quick again, and the story repeats ... flushing shared_poll is possible in test system only, it's out of question for prod system of course
    - All above happens in 'lab' environment, i.e. no multi-user load yet ... practically 'one-session' system
    - I have tried both AMM and ASSM memory management(s) and same problem happens regardless (my old 10g database uses ASSM and I am trying to implement ASM in new 11g db)
    - On same server, the SQL in question performs correctly if I run it in 10g environment;
    - I have updated my 11g Oracle software/db with the latest CPU;
    In addition, I have played with 'result cache' in 11g, and putting 'result_cache' hint in my sql resolved the issue. But that will open a lot of new questions for implementation in real app environment ... so at this moment, I don't want to evaluate result cache ...if I don't have to
    I am thinking to try this on another server and eliminate eventual issue with some kind of faulty memory on existing server ... after that - to open ticket with Oracle ...
    Any similar experience out there? Any thoughts?
    Thanks a lot ...

    Welcome to the forums !
    How to post a tuning request
    HOW TO: Post a SQL statement tuning request - template posting
    When your query takes too long ...
    HTH
    Srini

  • Strange behavior after software update

    I'm working with a 13" MacBook running OS X 10.4.11. Recently, the owner ran Software Update to download the most recent security update. On shutting down before restarting, she was prompted to recover unused space in her Filevault-protected home directory. The recovery process hung, and she was forced to force-restart the Mac. And that's when things got weird ...
    The Mac now exhibits all kinds of odd behavior, including widespread amnesia with regard to its preference files. Several applications - Mail, iChat, Address Book etc. - will randomly 'forget' all their stored data and revert to the 'never used before state'. iTunes repeatedly complains that its library file is corrupt. Mail attachments go missing. The Address Book lost all its data, and it took multiple attempts to get it to re-read the backed-up version of the data file. The Console indicates some errors reading plist files. Downloaded files appear damaged (trying to download the OS X 10.4.11 Combo Update, for instance, resulted in failed verification) although downloading them to another volume seems to work.
    TechTool 3.11 doesn't indicate any problems with the computer, and following the Apple-recommended procedure for verifying a sparse image (i.e. a FileVault home directory) didn't report any errors. However, it's pretty clear that something is very wrong.
    Has anyone seen this issue before, and found a fix? Or is the best solution to nuke and reinstall the OS from zero, then restore all the user's data from backups?

    One other possibility would be to reapply that update and/or the The combo update for Intel-based Macs...
    http://www.apple.com/support/downloads/macosx10411comboupdateintel.html
    Repair Permissions before & after re-install, then reboot again each time.

  • Strange behavior after waking from sleep

    I recently got a Mac Pro 3.33GHz 6-core and put an OWC 60G SSD in as the boot drive. It worked great for the first month or so, but now it's acting strange. Before, when waking from sleep, my computer would immediately come on and be ready to use. Now when I wake it up, it takes a good 20 seconds for me to be able to use. (It's a very long time compared to my computer being awake before I could turn on the monitor.)
    When waking, moving the mouse makes a stuttering motion and its not useable at all until my computer is done with whatever its doing. And, my external firewire drive always crashes like I didn't properly eject it. It never used to do this.
    I've tried waking my computer without the drive on but it still acts the same. I haven't changed or installed anything since it has been doing this. Does anybody know what's going on? Thanks

    Yes that is something I was thinking about mentioning which is called zapping the pram. It will reset some of your settings back to there defaults but no big deal and it does eat up your battery on your logic board so only do it when needed.
    It may get rid of the problem.
    as cscscs said.
    while restarting, hold down option, command, P and R all together, which is supposed to do some kind of restore to hardware (I think)
    Before you hit the power switch hold down the command option p and r keys then hit the power button and hold it down until you here the computer chime twice then let go.
    I found apples instructions here.
    Resetting PRAM and NVRAM
    http://support.apple.com/kb/ht1379
    1. Shut down the computer.
    2. Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
    3. Turn on the computer.
    4. Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
    5. Hold the keys down until the computer restarts and you hear the startup sound for the second time.
    6. Release the keys.
    the other bit he said about holding the boot button with everything unplugged I have not heard before but I would do it then zap the pram and see if your good to go.

  • Strange behavior after waking from sleep, lion

    Not sure how to describe my problem... When I come back to my Mac to resume working after the screensaver has been activated for some time (say 10 minutes or longer), the screen is frozen.... Well, not exactly. As I move my mouse around to wake it, it leaves a "pixelated" trail... Almost like an etch-a-sketch. When I locate my login icon, I then click it and the password window is revealed.
    Note: it takes 10 times longer to wake from sleep than it did with Leopard. The system also feels generally much less snappy and responsive. I booted from an external drive today and ran Disk utility to verify and repair (it found tons of issues) but with no improvement. Also note, I performed  "clean install from scratch" this time.
    Someone please help!!!!!

    Hello Mike,
    I wonder if it's a variation of this...
    Resolution
    Move the mouse or trackpad cursor over the center area of the login window so you can see the user icons. Click on the icon of the user that you would like to login as, type in the user's password, and press Return.
    If the login window is configured to show only the name and password fields, type in the user's name and password into the fields, and press Return (even if you cannot see the rest of the login window).
    Additional Information
    This issue will not occur if the display is not sleeping when the account is logged out. Use the steps below to confirm that the account is not configured to log out automatically while the display is sleeping:
    Open System Preferences > Security & Privacy > General.  Click the padlock to unlock the preference pane and enter your admin password. Click the Advanced button at the bottom, then see if the option "Log out after N minutes of inactivity" (where N is the number of minutes) is enabled.
    Open System Preferences > Energy Saver and configure Display Sleep to occur after the account is logged out, by dragging the slider to a number of minutes that is greater than N was set to in the previous step.
    Important: If automatic log out is not needed, disable "Log out after Nminutes of inactivity" in System Preferences > Security & Privacy > General. This will also prevent the issue.
    http://support.apple.com/kb/TS4135?viewlocale=en_US

  • Strange behavior after granting a role associated to an access policy.

    Greetings.
    I am using OIM 11.1.1.3 and I am using also the DBUM Adapter 9.1.0.4.
    I Defined 3 roles in OIM after that I defined three access policies with the purpose of provision roles at a database.
    Every policy is associated to a role and a DBUM resource.
    At the end I have the following policies.
    Policy Name OIM Role Database Role
    1. Policy Role A - Role A - DBRoleA
    2. Policy Role B - Role B - DBRoleB
    3. Policy Role B - Role C - DBRoleC.
    When a role is granted to OIM User using the Administration Console the correct database role is provisioned at the specified database. But If I revoke a Role from the user and grant the same role again the specified role is not provisioned to the specified database.
    Example: An user have "Role A", "Role B" ,"Role C" at the database the user have DBRoleA, DBRoleB, DBRoleC.
    After revoking "Role A" from the user the database have the correct roles DBRoleB and DBRoleC.
    But if the "Role A" is granted again to the user the DBRoleA is not provisioned at the database.
    I enabled the dbum log file and it looks like the wrong role was chosen and the DBRoleB is the database role to be provisioned. Because we see at the log file when the "Role A" is granted to the user:
    [WLS_OIM1] [TRACE] [] [OIMCP.DBUM] [tid: [ACTIVE].ExecuteThread: '2' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: oiminternal] [ecid: 0000JDjSF5i9h^5prOt1iY1EgfQX0000lD,0] [SRC_CLASS: com.thortech.util.logging.Logger] [APP: oim#11.1.1.3.0] [dcid: 4506c477d760fc7e:26c2d53a:1336a1dbc64:-7ffd-0000000000000d45] [SRC_METHOD: debug] oracle.iam.connectors.dbum.integration.DBUMProvisionManager : getChildFormData : Form Value2011-11-04[2011-11-04T11:37:14.392-05:00] [WLS_OIM1] [TRACE] [] [OIMCP.DBUM] [tid: [ACTIVE].ExecuteThread: '2' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: oiminternal] [ecid: 0000JDjSF5i9h^5prOt1iY1EgfQX0000lD,0] [SRC_CLASS: com.thortech.util.logging.Logger] [APP: oim#11.1.1.3.0] [dcid: 4506c477d760fc7e:26c2d53a:1336a1dbc64:-7ffd-0000000000000d45] [SRC_METHOD: debug] oracle.iam.connectors.dbum.integration.DBUMProvisionManager : getChildFormData : Child form data map received:- {UD_DB_ORA_R_VERSION=0, UD_DB_ORA_R_KEY=3180, UD_DB_ORA_R_UPDATE=2011-11-04, UD_DB_ORA_R_CREATE=2011-11-04, Process Instance.Key=5916, UD_DB_ORA_R_UPDATEBY=6, UD_DB_ORA_R_ROLE=102~*DBRoleB*, Access Policies.Key=183, UD_DB_ORA_R_CREATEBY=6}
    The question is somebody has experienced the same issue?
    Is there another way to provisioning database roles after granting OIM Roles?
    Thanks!
    Ramiro Ortíz

    Finally we opened a Service Request to solve this issue, and it was a bug "OIM SENDING WRONG ENTITLEMENT NAME TO TARGET DURING ADD ENTITLEMENT OPERATION" and Oracle generated the patch 13499465 for DBUM Connector. Oracle had to provide us a new Readme to apply this patch because it wasn't well explained. So far the patch seems to work, we are making some tests now to be sure that the issue is solved. I just want to share that with the OIM community.
    Ramiro Ortiz

  • Strange behavior of the Macbook pro display

    Hi to all
    I'm using my MacBook pro, and notice some strange behavior after open several windows or applications, I don't know how to explain, so here is a photo:
    http://www.flickr.com/photos/[email protected]/
    I have tried: go back to 10.4.6 / create a new account / Hardware test... and Nothing.
    Any suggestions?
    Pedro

    I am having the exact same problem(and no one is replying to my post either), I read in another post of someone who had a somewhat similar issue and someone commented that it was bad VRAM and warranted the logic board to be replaced. I'm hoping this is not the case, or at least hoping the problem does not get worse because I am in school and can't be without this computer for 2 weeks while it gets repaired..I'm hoping I can last til the holidays...
    pictures of my problem:
    http://www.rpi.edu/~neala/pics/display/Messed%20up%20desktop.png
    http://www.rpi.edu/~neala/pics/display/Picture%204.png
    Sometimes I can make it go away by moving windows, and sometimes that makes it worse... this computer is only 100 days old...come on apple..help us out!

  • Strange behavior scrolling LongListSelector - WP8

    I have an app where I save the user's contacts in a local Database, then bind this contacts in a LongListSelector.
    The app has a button that,, when clicked, update the local database (make it
    identical to the devide).
    When there is changes, the LongListSelector has a strange behavior after return from search to the list (view): when I scroll fast or after some time scrolling, a blank space appears in the middle of the list. Then I found out that, apparently, the list
    is cutting some items...
    This behavior happens only when I have a long list, like 50 items or more..
    I bind the items on LongListSelector this way:
    XAML:
    <Grid x:Name="ContentPanelContatos" Grid.Row="1" Margin="0" VerticalAlignment="Stretch" HorizontalAlignment="Stretch" >
    <Grid x:Name="gridContatos" Grid.Row="1" Margin="12,2,12,0" HorizontalAlignment="Stretch" VerticalAlignment="Stretch" >
    <Grid.RowDefinitions>
    <RowDefinition Height="Auto"/>
    <RowDefinition Height="*"/>
    </Grid.RowDefinitions>
    <Grid Grid.Row="0" Margin="0,0,0,12" >
    <TextBox x:Name="tbxSearch" VerticalAlignment="Top" HorizontalAlignment="Stretch" Visibility="Collapsed" TextChanged="TbxSearch_TextChanged" LostFocus="TbxSearch_LostFocus" Style="{StaticResource TextBoxStyle}" />
    </Grid>
    <phone:LongListSelector Grid.Row="1" x:Name="llsContacts" ItemsSource="{Binding}" SelectionChanged="llsContacts_SelectionChanged" >
    <phone:LongListSelector.ItemTemplate>
    <DataTemplate>
    <ListBoxItem local:TiltEffect.IsTiltEnabled="true">
    <Grid Margin="0,0,0,10" >
    <TextBlock Text="{Binding NAME, Mode=TwoWay}" FontFamily="Segoe WP" FontSize="28" Margin="77,0,0,0" />
    <TextBlock Text="{Binding Path=NUMBER, Mode=TwoWay}" FontFamily="Segoe WP Light" FontSize="17" Margin="77,33,0,0"/>
    </Grid>
    </ListBoxItem>
    </DataTemplate>
    </phone:LongListSelector.ItemTemplate>
    </phone:LongListSelector>
    </Grid>
    <!-- more 2 grids with contents -->
    </Grid>
    I was binding the items using ObservableCollection and I was having this problem.. Then I tried to erase the list and bind it again (after the search) this way:
    if (llsContacts.ItemsSource != null)
    llsContacts.ItemsSource.Clear();
    llsContacts.DataContext = daoRd.GetData();
    But I'm still with this problem...
    Does anybody can tell me what is happening?
    Am I doing something wrong?
    Reading this article:
    Frame rate counters in Windows Phone, I noticed that when this problem happens, some of the numbers that are on the side of the screen when debugging, stops changing...
    They stops like this:
    User Interface Thread FPS: 000
    Texture Memory Usage: 007181
    Surface Counter: 050
    Intermediate Texture Counter: 002
    Does this numbers means something?

    have you dumped the contents of what is returned from daoRD.GetData()?   Could be one of the items in the collection has blank strings?   Also I noticed you clear the ItemsSource before setting the DataContext.  That is probably
    not necessary if you are setting the DataContext immediately after that.
    Bret Bentzinger (MSFT) @awehellyeah

  • Strange Client Behavior after upgrading to 10g

    Hello Friends !!!!
    Here is my scenario:
    Oracle Database 10g 10.2.0.3
    Windows 2008 Server SP2
    After upgrading from oracle 9.2.0.1.0 and Windows 2003 Server I'm facing a strange behavior.
    Many times over the days some machines do not release some table resources even having their status "INACTIVE" and the wait event "SQL *Net message from client" and wait class "IDLE".
    Therefore, i got a lot of locked sessions, and users complaining..... until I kill them
    The client machine was as well switched to Oracle 10g client....
    Have you guys got any tips about this scenario?
    Tks for any advice.

    About the lock queue:
    1. blocking session has an exclusive table lock on VENDEDORES table; this is very rare in application because most of the time not needed: application code should try to avoid to take such kind of lock.
    2. blocked sessions request a row share table lock: it looks like that VENDEDORES table is a child table linked to some parent table with a foreign key constraint and that an index on the child table foreign key is missing (this kind of lock is requested if you DELETE from parent table or update parent table primary key).
    About the lock session: this is the blocking session that is waiting since 19 seconds on client: it is likely an application issue: you should try to investigate what the client (aservice.exe) is doing while holding an exclusive table lock.

  • [BUG] Jumbo frames issues after suspend/resume

    I have a 2.66Ghz MacBookPro5,1 which I recently upgraded to Snow Leopard. It's connected to a gigabit LAN and makes use of jumbo frames (MTU 9000).
    Everything was working flawlessly under Leopard, but since the upgrade to 10.6, I've noticed some very strange networking behavior. Essentially, networking goes AWOL as soon as it tries to transfer big data chunks *after a suspend/resume*. Remote sessions (ssh), file tranfers (ftp/afp) are affected.
    AFAICT, small packets work (eg, the output of "uptime" in a ssh session works just fine), but anything "big" (copying a large file over ftp or afp) hangs the connection. It seems that reducing the jumbo frame max size (using "ifconfig en0 mtu <whatever smaller than the previous setting>") temporarily fixes the issue, until the next hang.
    This problem only happens after suspend/resume. Upon cold boot, everything works just fine, so I'm suspecting a driver issue.
    The only difference between previously "working just fine" situation and the current issue is the upgrade from 10.5 to 10.6. I should mention I'm running in 64bit mode.
    HTH
    Message was edited by: thibaut

    If you have found a verified and reproducible bug then report it here: Feedback. The Discussions is not a bug reporting venue. Apple engineers do not read the Discussions.
    If you want help resolving a problem that is the purpose of the Discussions, but you need to post a question.

  • Strange behavior when "trying" to burn a disk.

    At least I think this is strange behavior, following the instructions in the help viewer, topic "Backing up your music to a CD or DVD." One thing for sure, it's not burning a disc and it ain't telling me why.
    I select the playlist and click "Burn Disc"
    Requests a blank disc. I insert one.
    Message "checking media"
    after about a minute, the disc ejects
    Message "checking media" displays another 30 seconds
    No other messages displayed.
    What the ??? Shouldn't it at least display an error message??
    Super-Drive information..... from System Profiler
    MATSHITA DVD-R UJ-845C:
    Firmware Revision: DPP9
    Interconnect: ATAPI
    Burn Support: Yes (Apple Shipped/Supported)
    Cache: 2048 KB
    Reads DVD: Yes
    CD-Write: -R, -RW
    DVD-Write: -R, -RW, +R, +RW
    Burn Underrun Protection CD: Yes
    Burn Underrun Protection DVD: Yes
    Write Strategies: CD-TAO, CD-SAO, DVD-DAO
    Media: No
    Using Sony DVD+R discs.
    Mac Mini   Mac OS X (10.4.8)  

    Whoops, sorry, this was while burning a playlist.
    I've also tried some Pleomax CD disks (Samsung), with no luck. I've tried burning directly from iTunes, and from Toast 7.
    Of the types I've tried, the Sony DVD's have been the best for me. Haven't tried many types though. Maybe I can get disks one at a time until I find a brand my burner likes.
    Still, isn't it strange that there is NO error message? It just quits?
    Mac Mini   Mac OS X (10.4.8)  

  • Strange Behavior from iTunes 7.2

    Running itunes - 7.2Recently had my itunes library “corrupted” or non functional.
    Spent a long, long time rebuilding the library (see below) and noticed some strange behavior that has me terrified that itunes is corrupted and I am going to loose all the hard work, etc..
    1. I have about 100 GB of music in various formats (apple protected/itunes store, mp3 (128 to 320), apple lossless, wav) and when I tried to rebuild the library by clicking on add to library it only added about 65 GB of the 100 GB. I had to go through and figure out what was missing and manually choose the specific folder when I added it.
    Major pain and very time consuming.
    So it is not adding songs correctly, but through way too much effort able to work around this.
    2. About ½ of the itunes store tunes I purchased are no longer apple protected format. Somehow they were converted to mp3 at 192kbs. Some of the songs play fine others are now not as crisp and make a poping sound or skip. How could this happen? Are these files corrupted? Will I loose them?
    3. At the top center of itunes the information bar, where the read out is for what song is playing and how much time has elapsed in the song, is not working. When I click on a song it starts playing but the elapsed time bar and counter never move, and when the next song starts playing the information never changes. It is stuck on what ever song you initiate play with by clicking on it and the information stays frozen.
    4. itunes randomly stops playing at the end of a song….If listening to an album it is usually after three or four songs and when listening to a play list it is usually after one song.
    I am afraid itunes is corrupted and will not function correctly and I am going to loose the hard work I put in trying to recover from the last crash.
    Any suggestions??
    Can’t wait for time machine. I hope it works as advertised. If so I could just go back in time to the last time iTunes worked correctly and go from there.

    First of all I hope that you have a good b/u of all your tunes - either on ext HD or on DVD. Don't forget to b/u the iTunes Library and .xml files at the same time.
    Have you tried to reinstall iTunes? Drag the app to the trash and remove the iTunesX.pkg from HD>Library>Receipts>iTunesX.pkg. Using a fresh .dmg of iTunes 7.2 reinstall.
    Have you repaired permissions with Disk Utility?
    Is your Quicktime up to date? At least version v7.1.5.
    MJ

  • Strange behavior - icon thumbnail instead of image - CC@OSX10.10

    Hi,
    my CC (@OS X 10.10.3) showing a strange behavior using vanishing point filter.
    After defining grid and try to paste the image OS X paste the icon thumbnail instead of the image,
    Many thanks in advance!!
    br
    Joachim

    It is probably related to the fact that you are setting the tables row height in the renderer this will fire a render message when the height changes. One height is applied to all rows of a table. This means that is you have images of different heights you are continually changing the tables row height and therefore continually rendereing.
    My approach would be to have all the images fit into a set size ( say 64*64 ( with scaling if neccesary ) you could then have a popup show the full size image if required.

  • Strange behavior when I try to match a mpeg2 video with the menu size image

    hello all,
    got a strange behavior when I try to match a mpeg2 video with the menu size image,
    menu size is 1920 x 1080 (photoshop file)
    mpeg2 video 1920 x 1080 (1second 19 frames)
    the idea is to go from the menu link to the next sub menu with a video as transition, using the same image on the video as the menu and then zooming in (in my case through a door) to end up after the zoom in the next level menu.
    I try to achieve a smooth change from the first play menu picture to the video image into the next level menu picture,
    everything works good but when I watch it on the preview mode on the left and right side of the video it shows a black bar at least 15 to 25 pixel wide, that means the video image appears smaller and it causes a little jump what is preety disturbing and can not be sold as a professional work.
    why encore treats the video size and picture differently?
    it's gratful appreciated if somebody who got experience in a transition I mentioned obove posting any solution,
    thankl you all

    Hi all
    I'm having a very similar problem with Encore. My menu items are distorting (a minor but infuriating squashing top and bottom) when previewed.
    Using Encore,PS,AE CS4
    DVD format SD PAL DV widescreen
    I created 3 menu frameworks and 3 video transistions to link them in AE. On the final frame of each transistion in AE I saved the frame with Composition>Save Frame to> Photoshop Layers. In PS i added the button functionality and saved.
    In Encore I use Dynamic link to import AE transistions as timelines and imported each PS menu twice, once as "menu" and once as an asset.
    When I link the timeline transistions to the menu and preview at the point the menu begins the whole image is squashed. When the next transistion is activated the image returns to its original size.
    Thinking it was the use of PS that was causing the menus to distort I used the menu asset directly in the time line. Obviously no menu functionality but also no distortion. The AE transistion flowed straight into the "menu" just as I expected.
    In the properties panel the menu Aspect Ratio 16:9
    The AE transistions PAR is SD PALwidescreen 1.4587.
    I did try the Blu Ray suggestion above but the same distortion was apparent.
    Any suggestions short of squashing the video to match the menu would be welcomed.
    Thanks

Maybe you are looking for