Strange Behavior from iTunes 7.2
Running itunes - 7.2Recently had my itunes library “corrupted” or non functional.
Spent a long, long time rebuilding the library (see below) and noticed some strange behavior that has me terrified that itunes is corrupted and I am going to loose all the hard work, etc..
1. I have about 100 GB of music in various formats (apple protected/itunes store, mp3 (128 to 320), apple lossless, wav) and when I tried to rebuild the library by clicking on add to library it only added about 65 GB of the 100 GB. I had to go through and figure out what was missing and manually choose the specific folder when I added it.
Major pain and very time consuming.
So it is not adding songs correctly, but through way too much effort able to work around this.
2. About ½ of the itunes store tunes I purchased are no longer apple protected format. Somehow they were converted to mp3 at 192kbs. Some of the songs play fine others are now not as crisp and make a poping sound or skip. How could this happen? Are these files corrupted? Will I loose them?
3. At the top center of itunes the information bar, where the read out is for what song is playing and how much time has elapsed in the song, is not working. When I click on a song it starts playing but the elapsed time bar and counter never move, and when the next song starts playing the information never changes. It is stuck on what ever song you initiate play with by clicking on it and the information stays frozen.
4. itunes randomly stops playing at the end of a song….If listening to an album it is usually after three or four songs and when listening to a play list it is usually after one song.
I am afraid itunes is corrupted and will not function correctly and I am going to loose the hard work I put in trying to recover from the last crash.
Any suggestions??
Can’t wait for time machine. I hope it works as advertised. If so I could just go back in time to the last time iTunes worked correctly and go from there.
First of all I hope that you have a good b/u of all your tunes - either on ext HD or on DVD. Don't forget to b/u the iTunes Library and .xml files at the same time.
Have you tried to reinstall iTunes? Drag the app to the trash and remove the iTunesX.pkg from HD>Library>Receipts>iTunesX.pkg. Using a fresh .dmg of iTunes 7.2 reinstall.
Have you repaired permissions with Disk Utility?
Is your Quicktime up to date? At least version v7.1.5.
MJ
Similar Messages
-
Strange behavior from a PB G4 (Part 2)
On to my next issue. Often when I'm typing the insertion point will jump to someplace other than where it should be or just disappear all together. I'm not doing anything to cause it to do this. I've been being really carefull to not to do anything wrong. I'ts often enough to be a real nuisance. It happened 7 times during my first post (Strange behavior from a PB G4) and 3 times during this one. Please help. Thanks.
Igor_G5 wrote:
... I thought about putting in a larger drive but when I looked up instructions for it i was surprized at how difficult it was.
Did you use the iFixit website? It has excellent pictures and instructions that are easy to follow.
Replacing any hard disk drive will be challenging for a paraplegic, but with someone's help it can be done fairly inexpensively. There are many tiny fasteners that require tiny tools. Use an egg carton to store them, separated by their location in the PowerBook.
Earlier PowerBooks are easier to work on than later ones.
I still use a PowerBook G4 on occasion, mostly for importing video for editing in iMovie. I upgraded its original 60 GB HD to a much larger one. If you were to do this you would need to locate the PowerBook's original System Install DVD to install and subsequently update OS X and all its original programs.
If you ensure at least a few gigabytes free space, I think most of your problems will be fixed. When free disk space gets down to a few hundred megabytes or less, performance will suffer dramatically. You don't want it to ever get anywhere near that low. Strange things start to happen.
Keep the number of icons on the Desktop to a minimum also. That makes a difference, for reasons that I do not fully understand. -
Strange behavior from a TextInput
Hello there. I have a strange behavior from a TextInput
component and i want a little help. I have created a movieclip
within. Inside is just a simple textinput component. When i'm
dragging the clip from the library to the stage a test the movie
everything is ok. When i', attaching the movie dynamicaly to the
stage and try to click within the textinput i' m not getting the
bar cursor, an d i cannot write within the textinput !!! Why this
happends? Any ideas?
I'm working in Flash 8.I think it could be the version problem. It is working in
Flash 8. -
Can anyone Reproduce This screencast? Strange behavior from Mac
https://drive.google.com/file/d/0B5LXJD4aR7maZng4cnl6Z2UxS28/edit?usp=sharing
1. Open finder and click go
2. go to /var
3. click on var alias and go to at file
After you open the /var/at folder there is a file called at.deny
4. Click on the file called at.deny and open with other application
You can only open it with Imessage, applemail or text edit. Notice in the screen cast that it automatically sends the at.deny file to any address that I type in I message.
5. You can also click on chron.deny and you can send that file automatically in Imessage or applemail. IS THIS NORMAL.
I AM PRETTY MUCH A NOVICE, BUT THIS MAC HAS SOME STRANGE BEHAVIORS. COULD THIS BE WHAT THEY CALL A BACKDOOR????APPLE JUST SCRATCHES THEIR HEAD??????]This is a file that is located at /var/db/caches/opendirectory/cache_mbr
Does any other mac users have this type of file -
Received a strange email from iTunes;
Reads as follows;
Dear iTunes Customer,
Thank you for downloading the movie The Three Flavours Cornetto® Trilogy. Unfortunately, the movie you received may have had some noticeable quality issues. We have corrected the problem and a new copy is available to download, free of charge. To receive the new version, please re-download the title from your iTunes purchase history.
For information on how to remove the current version, go to:
How to delete content you've downloaded from the iTunes Store, App Store, iBooks Store, or Mac App Store
For information on how to download the new copy, go to:
Downloading past purchases from the iTunes Store, App Store, and iBooks Store
Regards,
iTunes Support Team
http://www.apple.com/support/itunes/ww/
I don't tend to click on unsolicited links and sure as heck don't remember ordering this movie. I have figured it to be a phishing scam.
Anyone else?Dear ed2345 and Nadine_brizuela,
As a Network Administrator I understand how these emails at first glance appear to be legitimate. Everything about them seems legitimate. That is why before commenting further, I waited for a response from Apple concerning this matter before confirming my worst fear. And as MiniBeast has stated: "I have figured it to be a phishing scam.", "it raised red flags immediately", "it's definitely a Phishing Scam to steal info." turns out to be correct and the word needs to get out to Apple customers as soon as possible, before any damage may be done.
As confirmed by Apple it is indeed an Phising scam. The links appear to be legitimate. They seems to point to Apple and above all, the very worst part is that they appear to be emailed from a legitimate Apple email server, when in fact it was not sent from Apple, as confirmed by the following response from Itunes support.
It is indeed a confirmed scam sent by hackers who could have only pulled this off by a DNS poisoning attack, but for me still seems fishy because of whois confirmation, but Apple confirms it did not come from them.
What is DNS poisoning: http://www.computer-network-security-training.com/what-is-a-dns-poisoning-attack /
For me, when I got this email, it seemed fishy to me as well, I opened it and it went to Apple, I closed out that browser and opened a different browser and went to Apple and reset my password and contacted support and then responded to this post above. With DNS poisoning it seems that the links are real because your browser says apple.com/... when in fact the links are completely fake sending you to a completely different server. And it even appears to be emailed from Apple, which, as confirmed by Apple, it was not.
The word needs to get out especially to all Apple customers, that this particular email is fake and a Phishing attack designed to get the users Apple ID login. I would not have believed it myself unless confirmed by Apple.
RESPONSE FROM APPLE SUPPORT BELOW:
Thanks for choosing Apple.
Greetings from iTunes Store Customer Support. My name is Mohammed and I am happy to assist you today.
I understand that you receive two emails from Apple about the movie. I know you must be eager to get this resolved. I will provide the necessary information.
I looked into this and found that neither the email nor its sender are affiliated with Apple. The email appears to be a phishing attempt, designed to trick users into visiting a website.
If you still have the email, please forward it to [email protected] so we can investigate it. If the email contains links or attachments, please don't open them.
Apple will only send you an email asking you to verify an email address in these situations:
- When you first set up an account
- Immediately after you add or change a contact email address for an Apple ID
Also, an email from Apple will never ask you for your password, Social Security Number, or full credit card number.
If you haven't already done so, I recommend following the suggestions in this article:
Apple ID: Security and your Apple ID
http://support.apple.com/kb/ht4232
Also, here are other articles that you might find helpful:
Identifying fraudulent "phishing" email
http://support.apple.com/kb/HT4933
Identifying legitimate emails from the iTunes Store
http://support.apple.com/kb/HT2075
I hope the information provided above is helpful.
if you have any further queries regarding iTunes Store, please reply to this email. I will be happy to assist you. Thank you for being a valued member of the iTunes family.
Have a nice day!
Sincerely,
iTunes Store Customer Support
http://www.apple.com/support/itunes/ww/ -
Hello All,
I have a form portlet and a report portlet on the same tabbed page. The form portlet receives the input parameters for the report portlet. The form portlet is based on a stored procedure. The values are passed to the stored procedure and the stored procedure is executed. After the procedure is executed, I place the following code in the on success box in the form:
htp.p('<script language="JavaScript1.3">');
htp.p('javascript:history.go(-1)');
htp.p('</script>');
This causes the browser to return to the previous screen which at this point has the data from the procedure execution(procedure populates temp table, report is run off of the temp table) displayed in the report. The problem is that all of this works perfectly from MY computer. However, when viewing this from other machines the browser simply blinks(refreshes super fast) and does nothing and the user is left there looking at the initial page with their parameters still in the form.
I noticed this behavior also in another tabbed page where there is a form based on a table and a report which uses the values from the form stored in the session object. That also works perfectly from my machine and one other machine but does not work from other desktop PCs. I am out of ideas as to how to solve this. I set the top level page to Don't Cache thinking this it would solve the problem but it did not.
Does anyone have any suggestions or have seen this problem before?I would suggest checking the following things:
* browser versions - different browser versions may behave slightly differently for the same javascript
* also check the cache settings of the browser - there is a setting in IExplorer about page caching (Internet Options-> general tab -> Temp files -> Settings -> "check for newer versions of the page") which should be "Every visit to the page" - I have seen similar strange behaviour when that is not so (default is "automatically" which may decide that it will just use the last cached version) -
Strange behaviors from SG300-10MP
Hi, everyone. Was hoping to get some advice and assistance regarding two issues with a brand new SG300-10MP our company recently bought.
1. I've been having difficulty getting a proper trunk port to work on this, as compared to the Cisco Catalyst 2960's. My office has temporarily been relocated to another space in our building. The core switch in this side of the building is a 2960 series. This room has a single network jack in it. That jack is plugged into the 2960 directly on a trunk port with no explicit vlans as native, allowed or disallowed. Pretty much the config of the port is "Switchport mode trunk" and that's it. I'm sharing this space with another person on the IT team and we both have multiple computers and VoIP phones, so we've placed a NetGear FS726TP switch in here that has 12 PoE ports (for the VoIP phones) and 12 non-PoE for everything else. Port 25 on this switch appears to be configured as a trunk port with all VLANs being tagged. The VLANs on this switch are (1, 3, 6, 10, 11, 1001 and 2). VLAN 6 is for PC's, 11 is for VoIP phones, 1001 is for management, and 1 is the default VLAN and also is the PVID for port 25. Everything plugged into the NetGear is working as expected. The SG300-10MP's port 9 is plugged into the NetGear's port 26. I've configured port 26 identically to port 25, so as far as the NetGear is concerned, that should be a trunk port. I've attempted to configure the SG300-10MP's port 9 as a trunk, but I've found that first I need to manually create all my VLANs on it that I want to use on the switch (in this case, 1, 6, 10, 11 and 1001), and then for the trunk to actually work as expected, I have to explicitly allow the VLAN's on port 9 ("switchport trunk allowed vlan add all"). I've configured GE1-8 to be access ports on VLAN 6. The strange thing is, every 5 minutes I get this message on the console: "%CDP-W-NATIVE_VLAN_MISMATCH: Native VLAN mismatch detected on interface gi9." This only occurs if I have a computer plugged into GE1 on the SG300. The computer also has a second connection into the NetGear, so I suspect it might be an issue with spanning tree, although how the switch is communicating through my PC is unknown. When I first unboxed the SG300 and plugged my computer into a port, it was grabbing a valid DHCP address for VLAN 6 somehow through my PC. Does anyone have any idea why I keep getting this? I'd done a "sh cdp n detail" and this is what it gives me:
Device-ID: 2960-06-TrunkSw5590.XXXX.XXXXX.local
Advertisement version: 2
Platform: cisco WS-C2960S-24TS-S
Capabilities: Switch IGMP
Interface: gi9, Port ID (outgoing port): GigabitEthernet0/15
Holdtime: 151
Version: Cisco IOS Software, C2960S Software (C2960S-UNIVERSALK9-M), Version 12.2(55)SE5, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Co
Duplex: full
Native VLAN: 1
SysObjectID: 0.0
VTP Management Domain: XXX
Primary Management Address: IP 10.100.100.125,
Addresses:
IP 10.100.100.125
Device-ID: SEP08000F77571D
Advertisement version: 2
Platform: Mitel 5330e,DN 2890
Capabilities: Host Phone
Interface: gi9, Port ID (outgoing port): Port 1
Holdtime: 125
Version: M6020006
Duplex: full
Power drawn: 6100 milliwatts
SysObjectID: 0.0
Addresses:
IP 10.2.2.60
Device-ID: SEP08000F8E7773
Advertisement version: 2
Platform: Mitel 5330e,DN 2643
Capabilities: Host Phone
Interface: gi9, Port ID (outgoing port): Port 1
Holdtime: 125
Version: M6020006
Duplex: full
Power drawn: 6100 milliwatts
SysObjectID: 0.0
Addresses:
IP 10.2.2.25
Device-ID: 5067ae3ccc29
Advertisement version: 2
Platform: Cisco SG300-10MP (PID:SRW2008MP-K9)-VSD
Capabilities: Switch IGMP
Interface: gi9, Port ID (outgoing port): gi1
Holdtime: 121
Version: 1.3.5.58
Duplex: full
Native VLAN: 6
SysName: switch3ccc29
SysObjectID: 0.0
Addresses:
IP 10.200.1.55 (this is the IP for Management of the SG300 on VLAN1001)
So, CDP appears to be working, seeing itself, the two VoIP phones and the core switch, but getting nothing from the NetGear (obviously). The Native VLAN on the core switch is 1 and the PVIDs on both trunk ports on the NetGear are also 1, the default VLAN on the NetGear is 1, all packets are tagged on ports 25 and 26, and I've even set GE9 on the SG300 as native vlan 1, but still getting these errors. Is this just a warning that's being caused by having that NetGear between the two Cisco switches or something else?
2. Whenever I make any changes to the VLANs on the switch from the command line, it always gives me this message: "Please ensure that the port through which the device is managed has the proper settings and is a member of the new management interface. Would you like to apply this new configuration? (Y/N)[N]" As mentioned above, VLAN 1001 is our management VLAN and I've assigned IP address 10.200.1.55, subnet mask 255.255.255.0 to interface VLAN1001. After I set that, if I make any changes to the VLANs, whether it be adding a new VLAN interface, or changing the IP address or removing an IP address, I'll get that message, choose "YES", and then I'll lose all IP connectivity to the rest of the VLAN1001 subnet. I look at the config and even if I was working with a VLAN other than 1001, the IP address I assigned to interface VLAN1001 will be gone. Also, the default gateway will be removed. So, every time I make any change to the VLANs, I have to go and re-do these things. Is this normal behavior for the configuration to blow itself up like this?
Help!Looks like Cisco small business products dont support the cisco network assistant. I have tried the web console with both Internet Explorer and Firefox.
-
Hmmm...Strange behavior by iTunes
When trying to import a CD (a bunch of them) I get a message saying unknown error occurred (-1401).
I am running itunes ver 6.0.1.3
Windows xp home
My itunes files are on a network drive
Anybody have any ideas what an error -1401 is?Christian,
Is this behavior seen in all applications? Or just
one?
Here is the log file from Page Sender (print-fax utility) showing the reoccuring doc title; however, this was not the name of the document I "printed" the fax from.
efax: 47:48 sent -> /Users/xtian/Library/Page Sender/Out/5B05E9DC-3786-11DB-AFBD-000393599154/design cards_21b.tiff
When you reinstalled the O/S, did you make a new
filesystem? or
just overlay the previous one?
I don't undertand your question. First I backed it up, then did a "archive and install". This didn't fix the roiginal trouble, so I erased the disk and reinstalled. I coppied the user folder minus the library and applications from the backup using DnD.
Are all users affected, or just one?
1 user only -
[SOLVED]strange behavior from pipe to wgetpaste
I noticed today that when I pipe a command into wgetpaste or my sprunge function I see what looks like terminal colour codes
inxi -Fc 1 | wgetpaste
http://bpaste.net/show/170458/
here is another with the same
http://bpaste.net/show/170455/
also one on sprunge
http://sprunge.us/eUhM
I normally use zsh but have tested from bash & I still get the same also I use terminator so I tried urxvt but alas the same happens!
I have no clue as to what is causing this, do you?
thanks for any help & if you need to see a config file please ask & I will try to get it for you.
Last edited by t0m5k1 (2014-01-21 21:55:43)That's not strange, it's what I would expect. inxi is using escape sequences to tell the terminal what colors to use. It doesn't know you're piping the output to wgetpaste. If you don't want escape sequences in your output, use "-c0" as in
inxi -Fc0 | wgetpaste
http://bpaste.net/show/170695/
Last edited by 2ManyDogs (2014-01-21 20:49:00) -
Strange behavior from TMG 2010
Hi all,
I have a strange issue in accessing internet behind TMG 2010 from random users. Sometimes internet works fine and sometimes not. I have checked the monitor section and I found this alert "Global denied packets rate limit: The number of denied TCP and
non-TCP packets per second exceeded the system limit. As a result, Forefront TMG reduced the number of records of denied packets that are written in the log."
I did the following:
Increase the number of TCP and non-TCP requests in Flood Mitigation Settings.
Add the range of my subnet in the exception section to allow all users.
Disable Mitigation flood attacks and worm propagation.
And the warning still exist and it is not directed to certain host.
Thanks in advance.Hi,
>>Sometimes internet works fine and sometimes not
Is there any error in TMG logging when the internet not work?
Please try to increase the number of denied packets by Specify how many denied packets trigger an alert
in flood mitigation settings.
Best Regards,
Joyce
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected] -
Strange Behavior From SwingWorker Class
I've been using the SwingWorker class to perform binary file parsing of a file that's supposed to be formatted a particular way and updating the user interface with the status as the file parses. Whenever I detect an anomolous event in the file, I save the even to an array and once execution is complete, in the done() method, I save the array to a user selected log file on disk.
If the user doesn't select an output log file, I just want the program to process the input file and show the usual on-screen information it displays. However, when I try to catch an IO exception upon attempting to create the log file in the runInBackground() method, not only doesn't it catch the exception but it transfers execution immediately to the done() method.
I can't include the entire file, but here are some snippets...
Log file definition:
private File logFile = null;...
Log file exception block in runInBackground(). It transfers execution to the done() method immediately after the try portion (?)
//Open the log file
try {
logFileOut = new BufferedWriter (new FileWriter (logFile.getPath()));
logFileOut.write ("Log file for bit shifted HCR frame scan \n");
logFileOut.write ("Scan conducted on file: " + loadFile.getPath() + "\n");
catch (FileNotFoundException e) {
//***User likely didn't enter a file name
jLabel5.setText("Scan Underway, no log file...");
catch (IOException f) {
jLabel5.setText("Unknown File Error");
}The code doesn't catch an exception on this block in the done() method:
try {
logFileOut.write ("Frame # " + frameText + " shifted " + shiftText + " bits at byte " + byteText + "\n");
} catch (IOException ex) {
finalStatusText = "Scan completed - no log file specified!";
catch (NullPointerException e) {
finalStatusText = "Scan completed - no log file specified!";
} And finally, it catches a nullPointerException upon attempting to close the file:
try {
logFileOut.close();
} catch (IOException ex) {
//*** User failed to provide a log file
finalStatusText = "Scan completed - no log file specified";
catch (NullPointerException e) {
finalStatusText = "Scan completed - no log file specified";
}Does anyone know why this is happening and why it's not catching the exceptions I expect it to? I'm starting to think this is a bug in the swingWorker class because I encountered a similar very strange situation when trying to use a linked list, which transferred execution to the done() method upon adding the first element. I had to use an array in that situation.For anyone who looked at this topic, I think I found the answer to my question:
When I tried to create a file with a blank file name, it threw a null pointer exception, which I wasn't looking for (as you can see from my sample code). I guess the swingWorker class catches any uncaught exceptions from overriding it's functions and immediately executes the done() method, hence the jump into the done() method.
Moral of the story is that I used an if-statement to detect if the file was still NULL and if it was, then I skipped the file write completely. Apparently if-statements execute much quicker and are preferred to catching exceptions. -
[SOLVED] Pacman strange behavior from last system upgrade
Hi,
From last august, pacman complains when I try a system update.
He says that a lot of local packages are more recent than proposed:
# pacman -Syu
:: Synchronisation des bases de données de paquets...
core est à jour;
extra est à jour;
community est à jour;
:: Début de la mise à jour complète du système...
Avertissement: a52dec: la version locale (0.7.4-5) est plus récente que extra (0.7.4-4)
... #the full stdout is @ the end
Avertissement: usbutils: la version locale (004-1) est plus récente que core (0.87-1)
:: Remplacer util-linux par core/util-linux-ng ? [O/n] o
A depency error occurs if I answere 'O':
Avertissement: vde2: la version locale (2.3.1-1) est plus récente que extra (2.3-1)
... #the full stdout is @ the end
Avertissement: zlib: la version locale (1.2.5-4) est plus récente que core (1.2.5-2)
résolution des dépendances...
recherche des conflits entre paquets...
Erreur: la préparation de la transaction a échoué (la satisfaction des dépendances a échoué)
:: mkinitcpio: requiert util-linux>=2.19
The last good upgrade is on 2011.08.30:
[2011-08-18 22:32] Running '/usr/bin/pacman -Syu'
[2011-08-18 22:32] synchronizing package lists
[2011-08-18 22:32] starting full system upgrade
... #the full stdout is @ the end
[2011-08-30 23:43] Running '/usr/bin/pacman -Syu'
[2011-08-30 23:43] synchronizing package lists
[2011-08-30 23:44] starting full system upgrade
[2011-08-30 23:44] upgraded imagemagick (6.7.1.6-1 -> 6.7.2.1-1)
[2011-08-30 23:44] upgraded lzo2 (2.05-1 -> 2.06-1)
[2011-08-30 23:44] Running '/usr/bin/pacman -Scc'
Here is the full stdouts:
# pacman -Syu
:: Synchronisation des bases de données de paquets...
core est à jour;
extra est à jour;
community est à jour;
:: Début de la mise à jour complète du système...
Avertissement: a52dec: la version locale (0.7.4-5) est plus récente que extra (0.7.4-4)
Avertissement: aalib: la version locale (1.4rc5-8) est plus récente que extra (1.4rc5-6)
Avertissement: acl: la version locale (2.2.51-1) est plus récente que core (2.2.49-1)
Avertissement: acpi: la version locale (1.5-1) est plus récente que extra (1.4-2)
Avertissement: acpid: la version locale (2.0.10-2) est plus récente que extra (1.0.10-3)
Avertissement: acpitool: la version locale (0.5.1-3) est plus récente que community (0.5.1-1)
Avertissement: alsa-lib: la version locale (1.0.24.1-1) est plus récente que extra (1.0.23-1)
Avertissement: alsa-utils: la version locale (1.0.24.2-3) est plus récente que extra (1.0.23-2)
Avertissement: apr: la version locale (1.4.5-1) est plus récente que extra (1.4.2-1)
Avertissement: apr-util: la version locale (1.3.12-2) est plus récente que extra (1.3.9-4)
Avertissement: artwiz-fonts: la version locale (1.3-6) est plus récente que extra (1.3-5)
Avertissement: aspell: la version locale (0.60.6.1-1) est plus récente que extra (0.60.6-4)
Avertissement: atk: la version locale (2.0.1-1) est plus récente que extra (1.30.0-1)
Avertissement: attr: la version locale (2.4.46-1) est plus récente que core (2.4.44-1)
Avertissement: audacity: la version locale (1.3.13-1) est plus récente que extra (1.3.12-3)
Avertissement: aufs2-util: la version locale (20110314-1) est plus récente que extra (20100517-1)
Avertissement: autoconf: la version locale (2.68-1) est plus récente que core (2.66-2)
Avertissement: automake: la version locale (1.11.1-2) est plus récente que core (1.11.1-1)
Avertissement: avahi: la version locale (0.6.30-5) est plus récente que extra (0.6.25-3)
Avertissement: babl: la version locale (0.1.4-1) est plus récente que extra (0.1.2-1)
Avertissement: bash: la version locale (4.2.010-1) est plus récente que core (4.1.007-1)
Avertissement: bash-completion: la version locale (1.3-2) est plus récente que extra (1.2-1)
Avertissement: bin86: la version locale (0.16.18-1) est plus récente que core (0.16.17-4)
Avertissement: binutils: la version locale (2.21.1-2) est plus récente que core (2.20.1-3)
Avertissement: bison: la version locale (2.5-1) est plus récente que core (2.4.2-1)
Avertissement: bluez: la version locale (4.96-1) est plus récente que extra (4.69-1)
Avertissement: boost-libs: la version locale (1.47.0-1) est plus récente que extra (1.43.0-1)
Avertissement: bzip2: la version locale (1.0.6-1) est plus récente que core (1.0.5-5)
Avertissement: cabextract: la version locale (1.4-1) est plus récente que extra (1.2-2)
Avertissement: ca-certificates: la version locale (20110502-1) est plus récente que core (20090814-3)
Avertissement: cairo: la version locale (1.10.2-2) est plus récente que extra (1.8.10-1)
Avertissement: cairomm: la version locale (1.10.0-1) est plus récente que extra (1.8.4-1)
Avertissement: cdparanoia: la version locale (10.2-3) est plus récente que extra (10.2-2)
Avertissement: cdrkit: la version locale (1.1.11-1) est plus récente que extra (1.1.10-1)
Avertissement: chromium: la version locale (13.0.782.215-1) est plus récente que extra (5.0.375.99-1)
Avertissement: clamav: la version locale (0.97.2-1) est plus récente que extra (0.96.1-1)
Avertissement: compositeproto: la version locale (0.4.2-1) est plus récente que extra (0.4.1-1)
Avertissement: coreutils: la version locale (8.12-3) est plus récente que core (8.5-2)
Avertissement: cracklib: la version locale (2.8.18-1) est plus récente que core (2.8.16-1)
Avertissement: cryptsetup: la version locale (1.3.1-2) est plus récente que core (1.1.3-1)
Avertissement: ctags: la version locale (5.8-2) est plus récente que extra (5.8-1)
Avertissement: curl: la version locale (7.21.7-1) est plus récente que extra (7.21.0-1)
Avertissement: damageproto: la version locale (1.2.1-1) est plus récente que extra (1.2.0-1)
Avertissement: dash: la version locale (0.5.7-2) est plus récente que core (0.5.6.1-1)
Avertissement: db: la version locale (5.2.28-1) est plus récente que core (4.8.26-2)
Avertissement: dbus: la version locale (1.4.14-1) est plus récente que extra (1.2.24-1)
Avertissement: dbus-core: la version locale (1.4.14-1) est plus récente que core (1.2.24-1)
Avertissement: dbus-glib: la version locale (0.94-2) est plus récente que extra (0.86-1)
Avertissement: dcron: la version locale (4.5-2) est plus récente que core (4.4-2)
Avertissement: ddrescue: la version locale (1.14-1) est plus récente que extra (1.11-1)
Avertissement: desktop-file-utils: la version locale (0.18-1) est plus récente que extra (0.16-1)
Avertissement: device-mapper: la version locale (2.02.88-1) est plus récente que core (2.02.70-1)
Avertissement: dhcpcd: la version locale (5.2.12-1) est plus récente que core (5.2.5-1)
Avertissement: dia: la version locale (0.97.1-4) est plus récente que extra (0.97.1-1)
Avertissement: dialog: la version locale (1.1_20110707-1) est plus récente que core (1.1_20100428-1)
Avertissement: diffutils: la version locale (3.1-1) est plus récente que core (3.0-1)
Avertissement: django: la version locale (1.3-1) est plus récente que extra (1.2.1-1)
Avertissement: dmxproto: la version locale (2.3.1-1) est plus récente que extra (2.3-1)
Avertissement: dnsutils: la version locale (9.8.0.P4-1) est plus récente que core (9.6.1-3)
Avertissement: dosfstools: la version locale (3.0.11-1) est plus récente que extra (3.0.9-1)
Avertissement: dvdauthor: la version locale (0.7.0-1) est plus récente que extra (0.6.14-7)
Avertissement: e2fsprogs: la version locale (1.41.14-1) est plus récente que core (1.41.12-1)
Avertissement: ed: la version locale (1.5-2) est plus récente que core (1.4-2)
Avertissement: eject: la version locale (2.1.5-7) est plus récente que extra (2.1.5-4)
Avertissement: encfs: la version locale (1.7.4-5) est plus récente que community (1.6-1)
Avertissement: enchant: la version locale (1.6.0-3) est plus récente que extra (1.6.0-1)
Avertissement: epdfview: la version locale (0.1.8-1) est plus récente que extra (0.1.7-5)
Avertissement: eventlog: la version locale (0.2.12-2) est plus récente que core (0.2.12-1)
Avertissement: exiv2: la version locale (0.21.1-2) est plus récente que extra (0.19-1)
Avertissement: exo: la version locale (0.6.2-1) est plus récente que extra (0.3.107-1)
Avertissement: expat: la version locale (2.0.1-6) est plus récente que core (2.0.1-5)
Avertissement: faad2: la version locale (2.7-2) est plus récente que extra (2.7-1)
Avertissement: fakeroot: la version locale (1.17-1) est plus récente que core (1.14.4-2)
Avertissement: ffmpeg: la version locale (20110724-1) est plus récente que extra (24460-1)
Avertissement: ffmpegthumbnailer: la version locale (2.0.6-1) est plus récente que community (2.0.2-2)
Avertissement: file: la version locale (5.08-1) est plus récente que core (5.04-2)
Avertissement: filesystem: la version locale (2011.08-1) est plus récente que core (2010.02-4)
Avertissement: findutils: la version locale (4.4.2-3) est plus récente que core (4.4.2-2)
Avertissement: firefox: la version locale (6.0-1) est plus récente que extra (3.6.8-1)
Avertissement: firefox-i18n: la version locale (6.0-2) est plus récente que extra (3.6.8-1)
Avertissement: fixesproto: la version locale (5.0-1) est plus récente que extra (4.1.1-1)
Avertissement: flac: la version locale (1.2.1-3) est plus récente que extra (1.2.1-2)
Avertissement: flashplugin: la version locale (10.3.183.7-1) est plus récente que extra (10.1.53.64-1)
Avertissement: flex: la version locale (2.5.35-4) est plus récente que core (2.5.35-3)
Avertissement: fontsproto: la version locale (2.1.1-1) est plus récente que extra (2.1.0-1)
Avertissement: freerdp: la version locale (0.8.2-3) est plus récente que community (0.7.2-1)
Avertissement: freetype2: la version locale (2.4.6-1) est plus récente que extra (2.4.1-1)
Avertissement: fuse: la version locale (2.8.5-1) est plus récente que extra (2.8.4-2)
Avertissement: gamin: la version locale (0.1.10-5) est plus récente que community (0.1.10-2)
Avertissement: gawk: la version locale (4.0.0-1) est plus récente que core (3.1.8-1)
Avertissement: gc: la version locale (7.1-3) est plus récente que extra (7.1-1)
Avertissement: gcc: la version locale (4.6.1-4) est plus récente que core (4.5.0-6)
Avertissement: gcc-libs: la version locale (4.6.1-4) est plus récente que core (4.5.0-6)
Avertissement: gdbm: la version locale (1.8.3-8) est plus récente que core (1.8.3-7)
Avertissement: geany: la version locale (0.20-1) est plus récente que community (0.19-1)
Avertissement: gegl: la version locale (0.1.6-1) est plus récente que extra (0.1.2-1)
Avertissement: gen-init-cpio: la version locale (2.6.36-1) est plus récente que core (2.6.32-1)
Avertissement: gettext: la version locale (0.18.1.1-3) est plus récente que core (0.18.1.1-1)
Avertissement: ghostscript: la version locale (9.04-5) est plus récente que extra (8.71-3)
Avertissement: giflib: la version locale (4.1.6-4) est plus récente que extra (4.1.6-3)
Avertissement: gimp: la version locale (2.6.11-6) est plus récente que extra (2.6.9-1)
Avertissement: git: la version locale (1.7.6.1-1) est plus récente que extra (1.7.2-1)
Avertissement: glade: la version locale (3.10.0-2) est plus récente que extra (3.6.7-1)
Avertissement: glib2: la version locale (2.28.8-1) est plus récente que core (2.24.1-1)
Avertissement: glibc: la version locale (2.14-5) est plus récente que core (2.12-4)
Avertissement: glibmm: la version locale (2.28.2-1) est plus récente que extra (2.24.2-1)
Avertissement: gmp: la version locale (5.0.2-3) est plus récente que core (5.0.1-1)
Avertissement: gnome-disk-utility: la version locale (3.0.2-1) est plus récente que extra (2.30.1-1)
Avertissement: gnome-icon-theme: la version locale (3.0.0-2) est plus récente que extra (2.30.3-1)
Avertissement: gnupg: la version locale (1.4.11-3) est plus récente que extra (1.4.10-2)
Avertissement: gnutls: la version locale (3.0.1-1) est plus récente que extra (2.8.6-1)
Avertissement: gobject-introspection: la version locale (0.10.8-1) est plus récente que extra (0.6.14-1)
Avertissement: gpicview: la version locale (0.2.2-1) est plus récente que community (0.2.1-3)
Avertissement: gpm: la version locale (1.20.6-6) est plus récente que core (1.20.6-5)
Avertissement: grep: la version locale (2.9-1) est plus récente que core (2.6.3-1)
Avertissement: groff: la version locale (1.21-1) est plus récente que core (1.20.1-4)
Avertissement: grub: la version locale (0.97-20) est plus récente que core (0.97-17)
Avertissement: gsl: la version locale (1.15-1) est plus récente que extra (1.14-1)
Avertissement: gstreamer0.10: la version locale (0.10.35-1) est plus récente que extra (0.10.29-1)
Avertissement: gstreamer0.10-base: la version locale (0.10.35-1) est plus récente que extra (0.10.29-1)
Avertissement: gtk2: la version locale (2.24.5-3) est plus récente que extra (2.20.1-2)
Avertissement: gtk-engines: la version locale (2.20.2-1) est plus récente que extra (2.20.1-1)
Avertissement: gtkmm: la version locale (2.24.2-1) est plus récente que extra (2.20.3-1)
Avertissement: gtksourceview2: la version locale (2.10.5-1) est plus récente que extra (2.10.4-1)
Avertissement: gtk-vnc: la version locale (0.4.3-2) est plus récente que extra (0.3.10-1)
Avertissement: gv: la version locale (3.7.2-1) est plus récente que extra (3.7.1-1)
Avertissement: gvfs: la version locale (1.8.2-1) est plus récente que extra (1.6.3-1)
Avertissement: gvfs-smb: la version locale (1.8.2-1) est plus récente que extra (1.6.3-1)
Avertissement: gvim: la version locale (7.3.266-1) est plus récente que extra (7.2-1)
Avertissement: gzip: la version locale (1.4-2) est plus récente que core (1.4-1)
Avertissement: hdparm: la version locale (9.37-1) est plus récente que core (9.28-1)
Avertissement: hexedit: la version locale (1.2.12-4) est plus récente que extra (1.2.12-2)
Avertissement: hgsvn: la version locale (0.1.8-3) est plus récente que community (0.1.8-1)
Avertissement: hunspell: la version locale (1.3.2-1) est plus récente que extra (1.2.12-1)
Avertissement: hyphen: la version locale (2.7.1-2) est plus récente que extra (2.5-1)
Avertissement: icon-naming-utils: la version locale (0.8.90-2) est plus récente que extra (0.8.90-1)
Avertissement: icu: la version locale (4.8.1-1) est plus récente que extra (4.4.1-1)
Avertissement: imagemagick: la version locale (6.7.2.1-1) est plus récente que extra (6.6.2.10-1)
Avertissement: initscripts: la version locale (2011.07.3-1) est plus récente que core (2010.07-1)
Avertissement: inkscape: la version locale (0.48.2-1) est plus récente que extra (0.47-4)
Avertissement: inputproto: la version locale (2.0.2-1) est plus récente que extra (2.0-1)
Avertissement: intel-dri: la version locale (7.11-1) est plus récente que extra (7.8.2-1)
Avertissement: iproute2: la version locale (2.6.39-1) est plus récente que core (2.6.34-2)
Avertissement: iptables: la version locale (1.4.12-2) est plus récente que core (1.4.8-1)
Avertissement: iputils: la version locale (20101006-1) est plus récente que core (20100214-2)
Avertissement: ipython: la version locale (0.11-1) est plus récente que community (0.10-4)
Avertissement: jack: la version locale (0.121.2-2) est plus récente que extra (0.118.0-3)
Avertissement: jasper: la version locale (1.900.1-6) est plus récente que extra (1.900.1-5)
Avertissement: jdk: la version locale (7-3) est plus récente que community (6u20-1)
Avertissement: jre: la version locale (7-3) est plus récente que community (6u20-1)
Avertissement: kbd: la version locale (1.15.3-1) est plus récente que core (1.15.2-1)
Avertissement: kbproto: la version locale (1.0.5-1) est plus récente que extra (1.0.4-1)
Avertissement: lcms: la version locale (1.19-1) est plus récente que extra (1.18-3)
Avertissement: less: la version locale (444-1) est plus récente que core (436-1)
Avertissement: libao: la version locale (1.1.0-1) est plus récente que extra (1.0.0-2)
Avertissement: libarchive: la version locale (2.8.4-2) est plus récente que core (2.8.4-1)
Avertissement: libass: la version locale (0.9.13-1) est plus récente que extra (0.9.9-1)
Avertissement: libasyncns: la version locale (0.8-3) est plus récente que community (0.8-2)
Avertissement: libcanberra: la version locale (0.28-1) est plus récente que extra (0.23-1)
Avertissement: libcap: la version locale (2.22-1) est plus récente que core (2.19-1)
Avertissement: libcups: la version locale (1.4.8-2) est plus récente que extra (1.4.4-1)
Avertissement: libdatrie: la version locale (0.2.4-1) est plus récente que extra (0.2.3-1)
Avertissement: libdmx: la version locale (1.1.1-1) est plus récente que extra (1.1.0-1)
Avertissement: libdrm: la version locale (2.4.26-1) est plus récente que extra (2.4.21-1)
Avertissement: libdvdcss: la version locale (1.2.10-2) est plus récente que extra (1.2.10-1.1)
Avertissement: libedit: la version locale (20110802_3.0-1) est plus récente que extra (20090923_3.0-1)
Avertissement: libevent: la version locale (2.0.12-1) est plus récente que core (1.4.14b-1)
Avertissement: libexif: la version locale (0.6.20-1) est plus récente que extra (0.6.19-1)
Avertissement: libfetch: la version locale (2.33-3) est plus récente que core (2.32-1)
Avertissement: libffi: la version locale (3.0.10-1) est plus récente que extra (3.0.9-1)
Avertissement: libfontenc: la version locale (1.1.0-1) est plus récente que extra (1.0.5-1)
Avertissement: libftdi: la version locale (0.19-1) est plus récente que extra (0.18-1)
Avertissement: libgcrypt: la version locale (1.5.0-1) est plus récente que core (1.4.6-1)
Avertissement: libgl: la version locale (7.11-1) est plus récente que extra (7.8.2-1)
Avertissement: libglade: la version locale (2.6.4-2) est plus récente que extra (2.6.4-1)
Avertissement: libgnome-keyring: la version locale (3.0.3-1) est plus récente que extra (2.30.1-1)
Avertissement: libgpg-error: la version locale (1.10-1) est plus récente que core (1.7-3)
Avertissement: libgssglue: la version locale (0.3-1) est plus récente que core (0.1-2)
Avertissement: libice: la version locale (1.0.7-1) est plus récente que extra (1.0.6-1)
Avertissement: libid3tag: la version locale (0.15.1b-6) est plus récente que extra (0.15.1b-5)
Avertissement: libldap: la version locale (2.4.26-3) est plus récente que core (2.4.22-1)
Avertissement: libmad: la version locale (0.15.1b-5) est plus récente que extra (0.15.1b-4)
Avertissement: libmpc: la version locale (0.9-2) est plus récente que core (0.8.2-2)
Avertissement: libmpeg2: la version locale (0.5.1-3) est plus récente que extra (0.5.1-1)
Avertissement: libnotify: la version locale (0.7.4-1) est plus récente que extra (0.4.5-1.1)
Avertissement: libogg: la version locale (1.3.0-1) est plus récente que extra (1.2.0-1)
Avertissement: libpcap: la version locale (1.1.1-2) est plus récente que core (1.1.1-1)
Avertissement: libpciaccess: la version locale (0.12.1-1) est plus récente que extra (0.11.0-1)
Avertissement: libpng: la version locale (1.4.8-1) est plus récente que extra (1.4.3-1)
Avertissement: libproxy: la version locale (0.4.7-1) est plus récente que extra (0.3.1-1)
Avertissement: librsvg: la version locale (2.34.0-1) est plus récente que extra (2.26.3-1)
Avertissement: libsamplerate: la version locale (0.1.8-1) est plus récente que extra (0.1.7-1)
Avertissement: libsasl: la version locale (2.1.23-7) est plus récente que core (2.1.23-4)
Avertissement: libsigc++: la version locale (2.2.10-1) est plus récente que extra (2.2.8-1)
Avertissement: libsm: la version locale (1.2.0-1) est plus récente que extra (1.1.1-1)
Avertissement: libsndfile: la version locale (1.0.25-1) est plus récente que extra (1.0.21-1)
Avertissement: libsoup: la version locale (2.34.3-1) est plus récente que extra (2.30.2-1)
Avertissement: libsoup-gnome: la version locale (2.34.3-1) est plus récente que extra (2.30.2-1)
Avertissement: libtasn1: la version locale (2.9-1) est plus récente que extra (2.6-1)
Avertissement: libtextcat: la version locale (2.2-8) est plus récente que community (2.2-6)
Avertissement: libthai: la version locale (0.1.15-1) est plus récente que extra (0.1.14-1)
Avertissement: libtiff: la version locale (3.9.5-1) est plus récente que extra (3.9.4-1)
Avertissement: libtirpc: la version locale (0.2.2-2) est plus récente que core (0.2.1-1)
Avertissement: libtool: la version locale (2.4-4) est plus récente que core (2.2.10-1)
Avertissement: libusb: la version locale (1.0.8-1) est plus récente que core (0.1.12-4)
Avertissement: libva: la version locale (1.0.14-1) est plus récente que extra (0.31.0_p13-2)
Avertissement: libvdpau: la version locale (0.4.1-1) est plus récente que extra (0.4-1)
Avertissement: libvorbis: la version locale (1.3.2-1) est plus récente que extra (1.3.1-1)
Avertissement: libvpx: la version locale (0.9.7.p1-1) est plus récente que extra (0.9.1-1)
Avertissement: libwmf: la version locale (0.2.8.4-8) est plus récente que extra (0.2.8.4-7)
Avertissement: libwpd: la version locale (0.9.2-1) est plus récente que extra (0.8.14-1)
Avertissement: libx11: la version locale (1.4.4-1) est plus récente que extra (1.3.4-1)
Avertissement: libxau: la version locale (1.0.6-1) est plus récente que extra (1.0.5-1)
Avertissement: libxaw: la version locale (1.0.9-1) est plus récente que extra (1.0.7-1)
Avertissement: libxcb: la version locale (1.7-2) est plus récente que extra (1.6-1)
Avertissement: libxcomposite: la version locale (0.4.3-1) est plus récente que extra (0.4.2-1)
Avertissement: libxcursor: la version locale (1.1.12-1) est plus récente que extra (1.1.10-1)
Avertissement: libxdmcp: la version locale (1.1.0-1) est plus récente que extra (1.0.3-1)
Avertissement: libxext: la version locale (1.3.0-1) est plus récente que extra (1.1.2-1)
Avertissement: libxfce4util: la version locale (4.8.1-2) est plus récente que extra (4.6.2-1)
Avertissement: libxfixes: la version locale (5.0-1) est plus récente que extra (4.0.5-1)
Avertissement: libxfont: la version locale (1.4.4-1) est plus récente que extra (1.4.2-1)
Avertissement: libxft: la version locale (2.2.0-1) est plus récente que extra (2.1.14-1)
Avertissement: libxi: la version locale (1.4.3-1) est plus récente que extra (1.3-2)
Avertissement: libxinerama: la version locale (1.1.1-1) est plus récente que extra (1.1-1)
Avertissement: libxkbfile: la version locale (1.0.7-1) est plus récente que extra (1.0.6-1)
Avertissement: libxml2: la version locale (2.7.8-1) est plus récente que extra (2.7.7-1)
Avertissement: libxmu: la version locale (1.1.0-1) est plus récente que extra (1.0.5-1)
Avertissement: libxpm: la version locale (3.5.9-1) est plus récente que extra (3.5.8-1)
Avertissement: libxrandr: la version locale (1.3.2-1) est plus récente que extra (1.3.0-1)
Avertissement: libxslt: la version locale (1.1.26-2) est plus récente que extra (1.1.26-1)
Avertissement: libxss: la version locale (1.2.1-1) est plus récente que extra (1.2.0-1)
Avertissement: libxt: la version locale (1.1.1-1) est plus récente que extra (1.0.8-1)
Avertissement: libxtst: la version locale (1.2.0-1) est plus récente que extra (1.1.0-1)
Avertissement: libxv: la version locale (1.0.6-1) est plus récente que extra (1.0.5-1)
Avertissement: libxvmc: la version locale (1.0.6-1) est plus récente que extra (1.0.5-1)
Avertissement: libxxf86dga: la version locale (1.1.2-1) est plus récente que extra (1.1.1-1)
Avertissement: libxxf86vm: la version locale (1.1.1-1) est plus récente que extra (1.1.0-1)
Avertissement: licenses: la version locale (2.8-1) est plus récente que core (2.6-1)
Avertissement: linux-api-headers: la version locale (3.0.1-1) est plus récente que core (2.6.34-1)
Avertissement: linux-firmware: la version locale (20110727-1) est plus récente que core (20100623-2)
Avertissement: lirc-utils: la version locale (1:0.9.0-6) est plus récente que extra (0.8.6-3)
Avertissement: logrotate: la version locale (3.8.0-2) est plus récente que core (3.7.8-1)
Avertissement: lpsolve: la version locale (5.5.2.0-1) est plus récente que extra (5.5.0.15-1)
Avertissement: lshw: la version locale (B.02.15-1) est plus récente que community (B.02.14-2)
Avertissement: lsof: la version locale (4.84-3) est plus récente que extra (4.83-1)
Avertissement: lua: la version locale (5.1.4-6) est plus récente que extra (5.1.4-5)
Avertissement: lvm2: la version locale (2.02.88-1) est plus récente que core (2.02.70-1)
Avertissement: lzo2: la version locale (2.06-1) est plus récente que core (2.03-1)
Avertissement: lzop: la version locale (1.03-1) est plus récente que extra (1.02rc1-4)
Avertissement: m4: la version locale (1.4.16-1) est plus récente que core (1.4.14-2)
Avertissement: make: la version locale (3.82-3) est plus récente que core (3.81-5)
Avertissement: man-db: la version locale (2.6.0.2-2) est plus récente que core (2.5.7-1)
Avertissement: man-pages: la version locale (3.32-1) est plus récente que core (3.25-1)
Avertissement: mdadm: la version locale (3.2.2-3) est plus récente que core (3.1.2-2)
Avertissement: meld: la version locale (1.5.2-1) est plus récente que extra (1.3.1-2)
Avertissement: mercurial: la version locale (1.9.2-1) est plus récente que extra (1.6-1)
Avertissement: mesa: la version locale (7.11-1) est plus récente que extra (7.8.2-1)
Avertissement: mime-types: la version locale (8-1) est plus récente que extra (1.0-3)
Avertissement: mkinitcpio: la version locale (0.7.2-1) est plus récente que core (0.6.7-1)
Avertissement: mkinitcpio-busybox: la version locale (1.18.5-1) est plus récente que core (1.16.2-1)
Avertissement: mlocate: la version locale (0.24-1) est plus récente que core (0.22.4-1)
Avertissement: moc: la version locale (20110528-3) est plus récente que extra (2.4.4-2)
Avertissement: module-init-tools: la version locale (3.16-1) est plus récente que core (3.11.1-2)
Avertissement: mpfr: la version locale (3.0.1.p4-2) est plus récente que core (3.0.0-1)
Avertissement: mpg123: la version locale (1.13.3-2) est plus récente que extra (1.12.3-1)
Avertissement: mplayer: la version locale (34007-1) est plus récente que extra (31774-1)
Avertissement: namcap: la version locale (3.1-1) est plus récente que extra (2.6-1)
Avertissement: nano: la version locale (2.2.6-1) est plus récente que core (2.2.4-1)
Avertissement: nbd: la version locale (2.9.23-1) est plus récente que community (2.9.15-1)
Avertissement: ncurses: la version locale (5.9-1) est plus récente que core (5.7-3)
Avertissement: neon: la version locale (0.29.6-2) est plus récente que extra (0.29.3-2)
Avertissement: netpbm: la version locale (10.47.24-1) est plus récente que extra (10.47.16-1)
Avertissement: net-tools: la version locale (1.60-18) est plus récente que core (1.60-14)
Avertissement: nmap: la version locale (5.51-1) est plus récente que extra (5.21-2)
Avertissement: nspr: la version locale (4.8.9-1) est plus récente que extra (4.8.4-1)
Avertissement: nss: la version locale (3.12.11-1) est plus récente que extra (3.12.6-3)
Avertissement: ntfs-3g: la version locale (2011.4.12-1) est plus récente que extra (2010.5.22-1)
Avertissement: obconf: la version locale (2.0.3.git20100309-2) est plus récente que extra (2.0.3-3)
Avertissement: openbox: la version locale (3.5.0-4) est plus récente que extra (3.4.11.2-1)
Avertissement: openssh: la version locale (5.8p2-9) est plus récente que core (5.5p1-1)
Avertissement: openssl: la version locale (1.0.0.d-1) est plus récente que core (1.0.0.a-2)
Avertissement: orc: la version locale (0.4.14-1) est plus récente que extra (0.4.6-1)
Avertissement: p7zip: la version locale (9.20.1-4) est plus récente que extra (9.13-2)
Avertissement: pacman: la version locale (3.5.4-4) est plus récente que core (3.4.0-2)
Avertissement: pacman-mirrorlist: la version locale (20110816-1) est plus récente que core (20100621-1)
Avertissement: pam: la version locale (1.1.4-1) est plus récente que core (1.1.1-1)
Avertissement: pango: la version locale (1.28.4-3) est plus récente que extra (1.28.1-1)
Avertissement: pangomm: la version locale (2.28.1-1) est plus récente que extra (2.26.2-1)
Avertissement: parted: la version locale (3.0-3) est plus récente que extra (2.3-1)
Avertissement: patch: la version locale (2.6.1-2) est plus récente que core (2.6.1-1)
Avertissement: pciutils: la version locale (3.1.7-4) est plus récente que core (3.1.7-1)
Avertissement: pcmciautils: la version locale (018-1) est plus récente que core (017-1)
Avertissement: pcre: la version locale (8.13-2) est plus récente que core (8.10-1)
Avertissement: perl: la version locale (5.14.1-3) est plus récente que core (5.10.1-5)
Avertissement: perl-error: la version locale (0.17016-2) est plus récente que extra (0.17016-1)
Avertissement: perl-xml-parser: la version locale (2.41-1) est plus récente que extra (2.36-6)
Avertissement: perl-xml-simple: la version locale (2.18-3) est plus récente que extra (2.18-2)
Avertissement: pixman: la version locale (0.22.2-1) est plus récente que extra (0.18.2-1)
Avertissement: pkg-config: la version locale (0.26-1) est plus récente que core (0.25-2)
Avertissement: polkit: la version locale (0.101-2) est plus récente que extra (0.96-2)
Avertissement: poppler: la version locale (0.16.7-1) est plus récente que extra (0.14.0-1)
Avertissement: poppler-data: la version locale (0.4.4-1) est plus récente que extra (0.4.2-1)
Avertissement: poppler-glib: la version locale (0.16.7-1) est plus récente que extra (0.14.0-1)
Avertissement: popt: la version locale (1.16-3) est plus récente que core (1.16-2)
Avertissement: powertop: la version locale (1.13-2) est plus récente que community (1.11-2)
Avertissement: ppl: la version locale (0.11.2-2) est plus récente que core (0.10.2-3)
Avertissement: procinfo-ng: la version locale (2.0.304-2) est plus récente que core (2.0.304-1)
Avertissement: procps: la version locale (3.2.8-4) est plus récente que core (3.2.8-1)
Avertissement: psmisc: la version locale (22.14-1) est plus récente que core (22.11-1)
Avertissement: pv: la version locale (1.2.0-1) est plus récente que community (1.1.4-4)
Avertissement: pygobject: la version locale (2.28.6-1) est plus récente que extra (2.21.3-1)
Avertissement: pygtk: la version locale (2.24.0-2) est plus récente que extra (2.17.0-1)
Avertissement: pygtksourceview2: la version locale (2.10.1-3) est plus récente que extra (2.10.1-1)
Avertissement: python: la version locale (3.2.1-1) est plus récente que extra (2.6.5-3)
Avertissement: python-lxml: la version locale (2.3-1) est plus récente que extra (2.2.6-1)
Avertissement: python-pexpect: la version locale (2.3-4) est plus récente que community (2.3-3)
Avertissement: python-pychart: la version locale (1.39-5) est plus récente que community (1.39-4)
Avertissement: python-pypdf: la version locale (1.13-1) est plus récente que community (1.12-4)
Avertissement: python-reportlab: la version locale (2.5-1) est plus récente que community (2.4-1)
Avertissement: python-virtualenv: la version locale (1.6.4-1) est plus récente que extra (1.4.9-1)
Avertissement: pyxml: la version locale (0.8.4-8) est plus récente que extra (0.8.4-6)
Avertissement: qemu-kvm: la version locale (0.15.0-2) est plus récente que extra (0.12.4-2)
Avertissement: randrproto: la version locale (1.3.2-1) est plus récente que extra (1.3.1-1)
Avertissement: raptor: la version locale (2.0.4-1) est plus récente que extra (1.4.21-1)
Avertissement: rasqal: la version locale (1:0.9.27-1) est plus récente que extra (0.9.19-2)
Avertissement: rdesktop: la version locale (1.7.0-2) est plus récente que extra (1.6.0-5)
Avertissement: readline: la version locale (6.2.001-2) est plus récente que core (6.1.002-1)
Avertissement: recode: la version locale (3.6-6) est plus récente que extra (3.6-5)
Avertissement: recordproto: la version locale (1.14.1-1) est plus récente que extra (1.14-1)
Avertissement: redland: la version locale (1:1.0.14-1) est plus récente que extra (1.0.10-2)
Avertissement: renderproto: la version locale (0.11.1-1) est plus récente que extra (0.11-1)
Avertissement: rsync: la version locale (3.0.8-2) est plus récente que extra (3.0.7-1)
Avertissement: ruby: la version locale (1.9.2_p290-1) est plus récente que extra (1.9.1_p429-1)
Avertissement: run-parts: la version locale (4.0.2-1) est plus récente que core (3.2.3-1)
Avertissement: sakura: la version locale (2.4.2-1) est plus récente que community (2.3.8-1)
Avertissement: schroedinger: la version locale (1.0.10-1) est plus récente que extra (1.0.9-1)
Avertissement: scrnsaverproto: la version locale (1.2.1-1) est plus récente que extra (1.2.0-1)
Avertissement: sdl: la version locale (1.2.14-7) est plus récente que extra (1.2.14-5)
Avertissement: sdparm: la version locale (1.06-1) est plus récente que core (1.05-1)
Avertissement: sed: la version locale (4.2.1-3) est plus récente que core (4.2.1-2)
Avertissement: sg3_utils: la version locale (1.30-1) est plus récente que extra (1.29-1)
Avertissement: shadow: la version locale (4.1.4.3-2) est plus récente que core (4.1.4.2-3)
Avertissement: shared-mime-info: la version locale (0.90-1) est plus récente que extra (0.71-1)
Avertissement: slim: la version locale (1.3.2-5) est plus récente que extra (1.3.1-7)
Avertissement: slock: la version locale (0.9-6) est plus récente que community (0.9-3)
Avertissement: smbclient: la version locale (3.6.0-8) est plus récente que extra (3.5.4-1)
Avertissement: soundtouch: la version locale (1.6.0-1) est plus récente que extra (1.5.0-1)
Avertissement: sox: la version locale (14.3.2-3) est plus récente que extra (14.3.1-2)
Avertissement: sqlite3: la version locale (3.7.7.1-1) est plus récente que core (3.6.23.1-1)
Avertissement: squashfs-tools: la version locale (4.2-1) est plus récente que extra (4.0-3)
Avertissement: sshfs: la version locale (2.3-1) est plus récente que extra (2.2-3)
Avertissement: startup-notification: la version locale (0.12-1) est plus récente que extra (0.10-1)
Avertissement: stunnel: la version locale (4.39-1) est plus récente que community (4.33-1)
Avertissement: subversion: la version locale (1.6.17-6) est plus récente que extra (1.6.9-5)
Avertissement: sudo: la version locale (1.8.2-1) est plus récente que core (1.7.3-1)
Avertissement: sysfsutils: la version locale (2.1.0-6) est plus récente que core (2.1.0-5)
Avertissement: syslinux: la version locale (4.04-2) est plus récente que extra (4.02-1)
Avertissement: syslog-ng: la version locale (3.2.4-3) est plus récente que core (3.1.1-1)
Avertissement: sysvinit: la version locale (2.88-2) est plus récente que core (2.86-5)
Avertissement: talloc: la version locale (2.0.5-1) est plus récente que extra (2.0.1-1)
Avertissement: tar: la version locale (1.26-1) est plus récente que core (1.23-3)
Avertissement: tcpdump: la version locale (4.1.1-2) est plus récente que extra (4.1.1-1)
Avertissement: tcp_wrappers: la version locale (7.6-12) est plus récente que core (7.6-11)
Avertissement: tdb: la version locale (1.2.9-1) est plus récente que extra (1.2.1-1)
Avertissement: texinfo: la version locale (4.13a-5) est plus récente que core (4.13a-4)
Avertissement: thunar: la version locale (1.2.2-3) est plus récente que extra (1.0.2-1)
Avertissement: thunar-archive-plugin: la version locale (0.3.0-1) est plus récente que extra (0.2.4-6)
Avertissement: thunar-volman: la version locale (0.6.0-2) est plus récente que extra (0.3.80-1)
Avertissement: transcode: la version locale (1.1.5-5) est plus récente que extra (1.1.5-4)
Avertissement: transmission-gtk: la version locale (2.33-1) est plus récente que extra (2.03-1)
Avertissement: tree: la version locale (1.6.0-1) est plus récente que extra (1.5.3-1)
Avertissement: ttf-dejavu: la version locale (2.33-1) est plus récente que extra (2.30-2)
Avertissement: ttf-freefont: la version locale (20100919-1) est plus récente que extra (20090104-2)
Avertissement: tzdata: la version locale (2011h-1) est plus récente que core (2010j-1)
Avertissement: udev: la version locale (173-3) est plus récente que core (160-1)
Avertissement: udisks: la version locale (1.0.4-1) est plus récente que extra (1.0.1-4)
Avertissement: uml_utilities: la version locale (20070815-4) est plus récente que extra (20070815-3)
Avertissement: unrar: la version locale (4.0.7-1) est plus récente que extra (3.9.10-1)
Avertissement: usbutils: la version locale (004-1) est plus récente que core (0.87-1)
:: Remplacer util-linux par core/util-linux-ng ? [O/n] o
Avertissement: vde2: la version locale (2.3.1-1) est plus récente que extra (2.3-1)
Avertissement: videoproto: la version locale (2.3.1-1) est plus récente que extra (2.3.0-1)
Avertissement: vim-runtime: la version locale (7.3.266-1) est plus récente que extra (7.2-1)
Avertissement: vpnc: la version locale (0.5.3.svn457-1) est plus récente que core (0.5.3-2)
Avertissement: vte: la version locale (0.28.2-1) est plus récente que extra (0.24.3-1)
Avertissement: wget: la version locale (1.13.1-1) est plus récente que core (1.12-2)
Avertissement: which: la version locale (2.20-4) est plus récente que core (2.20-3)
Avertissement: wine: la version locale (1.3.27-1) est plus récente que community (1.2-1)
Avertissement: wireless-regdb: la version locale (2010.11.24-1) est plus récente que core (2009.11.25-1)
Avertissement: wireless_tools: la version locale (29-4) est plus récente que core (29-3)
Avertissement: wpa_supplicant: la version locale (0.7.3-3) est plus récente que core (0.6.10-2)
Avertissement: wxgtk: la version locale (2.8.12.1-1) est plus récente que extra (2.8.11-1)
Avertissement: x11vnc: la version locale (0.9.12-1) est plus récente que extra (0.9.10-1)
Avertissement: x264: la version locale (20110617-1) est plus récente que extra (20100722-1)
Avertissement: xarchiver: la version locale (0.5.2-4) est plus récente que extra (0.5.2-1)
Avertissement: xaw3d: la version locale (1.5E-3) est plus récente que extra (1.5E-2)
Avertissement: xbitmaps: la version locale (1.1.1-1) est plus récente que extra (1.1.0-1)
Avertissement: xcb-proto: la version locale (1.6-2) est plus récente que extra (1.6-1)
Avertissement: xdg-utils: la version locale (1.1.0rc1-3) est plus récente que extra (1.0.2.20100618-1)
Avertissement: xextproto: la version locale (7.2.0-1) est plus récente que extra (7.1.1-1)
Avertissement: xf86-input-evdev: la version locale (2.6.0-3) est plus récente que extra (2.4.0-1)
Avertissement: xf86-input-keyboard: la version locale (1.6.0-2) est plus récente que extra (1.4.0-2)
Avertissement: xf86-input-mouse: la version locale (1.7.1-1) est plus récente que extra (1.5.0-2)
Avertissement: xf86-input-synaptics: la version locale (1.4.1-1) est plus récente que extra (1.2.2-2)
Avertissement: xf86-video-fbdev: la version locale (0.4.2-4) est plus récente que extra (0.4.2-1)
Avertissement: xf86-video-intel: la version locale (2.15.0-2) est plus récente que extra (2.12.0-1)
Avertissement: xf86-video-vesa: la version locale (2.3.0-5) est plus récente que extra (2.3.0-2)
Avertissement: xf86vidmodeproto: la version locale (2.3.1-1) est plus récente que extra (2.3-1)
Avertissement: xfconf: la version locale (4.8.0-2) est plus récente que extra (4.6.2-1)
Avertissement: xineramaproto: la version locale (1.2.1-1) est plus récente que extra (1.2-1)
Avertissement: xkeyboard-config: la version locale (2.2.1-1) est plus récente que extra (1.8-1)
Avertissement: xorg-docs: la version locale (1.6-1) est plus récente que extra (1.5-1)
Avertissement: xorg-fonts-encodings: la version locale (1.0.4-1) est plus récente que extra (1.0.3-1)
Avertissement: xorg-font-utils: la version locale (7.6-2) est plus récente que extra (7.5-2)
Avertissement: xorg-server: la version locale (1.10.3.901-1) est plus récente que extra (1.8.1.902-1)
Avertissement: xorg-server-utils: la version locale (7.6-2) est plus récente que extra (7.5-4)
Avertissement: xorg-twm: la version locale (1.0.7-1) est plus récente que extra (1.0.4-3)
Avertissement: xorg-utils: la version locale (7.6-7) est plus récente que extra (7.6-2)
Avertissement: xorg-xauth: la version locale (1.0.6-1) est plus récente que extra (1.0.4-1)
Avertissement: xorg-xinit: la version locale (1.3.0-3) est plus récente que extra (1.2.1-1)
Avertissement: xproto: la version locale (7.0.22-1) est plus récente que extra (7.0.17-1)
Avertissement: xterm: la version locale (271-1) est plus récente que extra (259-1)
Avertissement: xvidcore: la version locale (1.3.2-1) est plus récente que extra (1.2.2-1)
Avertissement: xz: la version locale (5.0.3-1) est plus récente que core (4.999.9beta-5)
Avertissement: zenity: la version locale (3.0.0-2) est plus récente que extra (2.30.0-1)
Avertissement: zip: la version locale (3.0-2) est plus récente que extra (3.0-1.1)
Avertissement: zlib: la version locale (1.2.5-4) est plus récente que core (1.2.5-2)
résolution des dépendances...
recherche des conflits entre paquets...
Erreur: la préparation de la transaction a échoué (la satisfaction des dépendances a échoué)
:: mkinitcpio: requiert util-linux>=2.19
# cat pacman.log
[2009-11-24 23:34] installed filesystem (2009.07-1)
[2011-08-18 22:32] Running '/usr/bin/pacman -Syu'
[2011-08-18 22:32] synchronizing package lists
[2011-08-18 22:32] starting full system upgrade
[2011-08-18 22:36] upgraded nettle (2.1-1 -> 2.2-1)
[2011-08-18 22:36] upgraded gnutls (2.12.7-2 -> 3.0.0-2)
[2011-08-18 22:36] upgraded libcups (1.4.8-1 -> 1.4.8-2)
[2011-08-18 22:36] upgraded freerdp (0.8.2-2 -> 0.8.2-3)
[2011-08-18 22:36] upgraded glib-networking (2.28.7-1 -> 2.28.7-4)
[2011-08-18 22:36] upgraded gtk-vnc (0.4.3-1 -> 0.4.3-2)
[2011-08-18 22:36] >>>
[2011-08-18 22:36] >>> If you use the LILO bootloader, you should run 'lilo' before rebooting.
[2011-08-18 22:36] >>>
[2011-08-18 22:36] >>> Updating module dependencies. Please wait ...
[2011-08-18 22:36] >>> Generating initial ramdisk, using mkinitcpio. Please wait...
[2011-08-18 22:36] ==> Building image from preset: 'default'
[2011-08-18 22:36] -> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux.img
[2011-08-18 22:36] ==> Starting build: 3.0-ARCH
[2011-08-18 22:36] -> Parsing hook: [base]
[2011-08-18 22:36] -> Parsing hook: [udev]
[2011-08-18 22:36] -> Parsing hook: [sata]
[2011-08-18 22:36] -> Parsing hook: [encrypt]
[2011-08-18 22:36] ==> Generating module dependencies
[2011-08-18 22:36] ==> Creating gzip initcpio image: /boot/initramfs-linux.img
[2011-08-18 22:36] 10623 blocks
[2011-08-18 22:36] ==> Image generation successful
[2011-08-18 22:36] ==> Building image from preset: 'fallback'
[2011-08-18 22:36] -> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux-fallback.img -S autodetect
[2011-08-18 22:36] ==> Starting build: 3.0-ARCH
[2011-08-18 22:36] -> Parsing hook: [base]
[2011-08-18 22:36] -> Parsing hook: [udev]
[2011-08-18 22:36] -> Parsing hook: [sata]
[2011-08-18 22:36] -> Parsing hook: [encrypt]
[2011-08-18 22:36] ==> Generating module dependencies
[2011-08-18 22:36] ==> Creating gzip initcpio image: /boot/initramfs-linux-fallback.img
[2011-08-18 22:36] 10623 blocks
[2011-08-18 22:36] ==> Image generation successful
[2011-08-18 22:36] upgraded linux (3.0.2-1 -> 3.0.3-1)
[2011-08-18 22:36] upgraded linux-headers (3.0.2-1 -> 3.0.3-1)
[2011-08-18 22:36] >>> PLEASE READ FOR KVM USAGE!
[2011-08-18 22:36] >>> Load the correct KVM module, you will need a KVM capable CPU!
[2011-08-18 22:36] >>> Add yourself to the group 'kvm'.
[2011-08-18 22:36] >>> Use 'qemu-kvm -enable-kvm' to use KVM.
[2011-08-18 22:36]
[2011-08-18 22:36] upgraded qemu-kvm (0.15.0-1 -> 0.15.0-2)
[2011-08-18 22:36] upgraded wireshark-cli (1.6.1-1 -> 1.6.1-2)
[2011-08-18 22:36] upgraded wireshark-gtk (1.6.1-1 -> 1.6.1-2)
[2011-08-18 22:37] Running '/usr/bin/pacman -Scc'
[2011-08-18 22:37] Running '/usr/bin/pacman -Syu'
[2011-08-18 22:37] synchronizing package lists
[2011-08-18 22:37] starting full system upgrade
[2011-08-19 23:24] Running '/usr/bin/pacman -Syu'
[2011-08-19 23:24] synchronizing package lists
[2011-08-19 23:24] starting full system upgrade
[2011-08-19 23:24] upgraded thunar (1.2.2-1 -> 1.2.2-2)
[2011-08-19 23:40] Running '/usr/bin/pacman -Scc'
[2011-08-20 23:41] Running '/usr/bin/pacman -Syu'
[2011-08-20 23:41] synchronizing package lists
[2011-08-20 23:41] upgraded pacman (3.5.4-3 -> 3.5.4-4)
[2011-08-20 23:41] Running '/usr/bin/pacman -Syu'
[2011-08-20 23:41] synchronizing package lists
[2011-08-20 23:41] starting full system upgrade
[2011-08-20 23:44] upgraded linux-api-headers (2.6.39.1-1 -> 3.0.1-1)
[2011-08-20 23:44] Generating locales...
[2011-08-20 23:44] fr_FR.UTF-8... done
[2011-08-20 23:44] fr_FR.ISO-8859-15@euro... done
[2011-08-20 23:44] fr_FR.ISO-8859-1... done
[2011-08-20 23:44] Generation complete.
[2011-08-20 23:44] upgraded glibc (2.14-4 -> 2.14-5)
[2011-08-20 23:44] upgraded zlib (1.2.5-3 -> 1.2.5-4)
[2011-08-20 23:44] upgraded binutils (2.21.1-1 -> 2.21.1-2)
[2011-08-20 23:44] upgraded isl (0.06-1 -> 0.06-2)
[2011-08-20 23:44] upgraded gcc-libs (4.6.1-2 -> 4.6.1-3)
[2011-08-20 23:44] upgraded gmp (5.0.2-2 -> 5.0.2-3)
[2011-08-20 23:44] upgraded cloog (0.16.2-1 -> 0.16.2-2)
[2011-08-20 23:44] upgraded eject (2.1.5-5 -> 2.1.5-7)
[2011-08-20 23:44] upgraded mpfr (3.0.1.p4-1 -> 3.0.1.p4-2)
[2011-08-20 23:44] upgraded libmpc (0.9-1 -> 0.9-2)
[2011-08-20 23:44] upgraded ppl (0.11.2-1 -> 0.11.2-2)
[2011-08-20 23:44] upgraded gcc (4.6.1-2 -> 4.6.1-3)
[2011-08-20 23:44] upgraded sudo (1.8.1.p2-1 -> 1.8.2-1)
[2011-08-21 20:20] Running '/usr/bin/pacman -Syu'
[2011-08-21 20:20] synchronizing package lists
[2011-08-21 20:21] starting full system upgrade
[2011-08-21 20:21] upgraded gnutls (3.0.0-2 -> 3.0.1-1)
[2011-08-21 20:21] Running '/usr/bin/pacman -Scc'
[2011-08-21 23:32] Running '/usr/bin/pacman -U wit-svn-2941-1-i686.pkg.tar.xz'
[2011-08-21 23:32] installed wit-svn (2941-1)
[2011-08-21 23:35] Running '/usr/bin/pacman -Rsn wit-svn-2941-1'
[2011-08-21 23:35] Running '/usr/bin/pacman -Rsn wit-svn-2941'
[2011-08-21 23:35] Running '/usr/bin/pacman -Rsn wit-svn'
[2011-08-21 23:35] removed wit-svn (2941-1)
[2011-08-22 01:05] Running '/usr/bin/pacman -Rsn john'
[2011-08-22 01:05] removed john (1.7.8-3)
[2011-08-22 22:39] Running '/usr/bin/pacman -Syu'
[2011-08-22 22:39] synchronizing package lists
[2011-08-22 22:40] starting full system upgrade
[2011-08-22 22:41] upgraded ghostscript (9.04-3 -> 9.04-4)
[2011-08-22 22:41] upgraded mplayer (33805-2 -> 34007-1)
[2011-08-22 22:41] upgraded soundtouch (1.5.0-1 -> 1.6.0-1)
[2011-08-22 22:41] upgraded usbutils (003-1 -> 004-1)
[2011-08-25 00:57] Running '/usr/bin/pacman -Syu'
[2011-08-25 00:57] synchronizing package lists
[2011-08-25 00:57] starting full system upgrade
[2011-08-25 01:02] upgraded nspr (4.8.8-1 -> 4.8.9-1)
[2011-08-25 01:02] upgraded nss (3.12.10-1 -> 3.12.11-1)
[2011-08-25 01:02] upgraded chromium (13.0.782.112-2 -> 13.0.782.215-1)
[2011-08-25 01:02] upgraded device-mapper (2.02.87-1 -> 2.02.88-1)
[2011-08-25 01:02] upgraded fakeroot (1.16-1 -> 1.17-1)
[2011-08-25 01:02] upgraded gamin (0.1.10-4 -> 0.1.10-5)
[2011-08-25 01:02] upgraded ghostscript (9.04-4 -> 9.04-5)
[2011-08-25 01:02] upgraded libsamplerate (0.1.7-2 -> 0.1.8-1)
[2011-08-25 01:02] upgraded libssh2 (1.2.7-2 -> 1.2.9-1)
[2011-08-25 01:02] upgraded lvm2 (2.02.87-1 -> 2.02.88-1)
[2011-08-25 01:02] upgraded pcre (8.13-1 -> 8.13-2)
[2011-08-25 01:02] upgraded xulrunner (6.0-1 -> 6.0-2)
[2011-08-25 01:03] Running '/usr/bin/pacman -Scc'
[2011-08-25 01:03] Running '/usr/bin/pacman -Syu'
[2011-08-25 01:03] synchronizing package lists
[2011-08-25 01:03] starting full system upgrade
[2011-08-26 22:59] Running '/usr/bin/pacman -Syu'
[2011-08-26 22:59] synchronizing package lists
[2011-08-26 22:59] starting full system upgrade
[2011-08-26 23:01] upgraded devtools (0.9.23-1 -> 0.9.27-1)
[2011-08-26 23:01] upgraded flashplugin (10.3.183.5-1 -> 10.3.183.7-1)
[2011-08-26 23:01] upgraded git (1.7.6-1 -> 1.7.6.1-1)
[2011-08-26 23:01] upgraded libffi (3.0.9-1 -> 3.0.10-1)
[2011-08-26 23:01] upgraded obconf (2.0.3.git20100309-1 -> 2.0.3.git20100309-2)
[2011-08-26 23:01] upgraded rasqal (1:0.9.26-1 -> 1:0.9.27-1)
[2011-08-26 23:01] upgraded smbclient (3.6.0-1 -> 3.6.0-4)
[2011-08-26 23:01] upgraded thunar (1.2.2-2 -> 1.2.2-3)
[2011-08-26 23:01] upgraded udisks (1.0.3-6 -> 1.0.4-1)
[2011-08-26 23:01] upgraded xarchiver (0.5.2-2 -> 0.5.2-4)
[2011-08-26 23:03] Running '/usr/bin/pacman -Scc'
[2011-08-26 23:03] Running '/usr/bin/pacman -Syu'
[2011-08-26 23:03] synchronizing package lists
[2011-08-26 23:03] starting full system upgrade
[2011-08-27 14:38] Running '/usr/bin/pacman -Syu'
[2011-08-27 14:38] synchronizing package lists
[2011-08-27 14:40] Running '/usr/bin/pacman -Syu'
[2011-08-27 14:40] synchronizing package lists
[2011-08-27 14:40] starting full system upgrade
[2011-08-27 14:44] upgraded avahi (0.6.30-4 -> 0.6.30-5)
[2011-08-27 14:44] upgraded isl (0.06-2 -> 0.07-1)
[2011-08-27 14:44] upgraded cloog (0.16.2-2 -> 0.16.3-1)
[2011-08-27 14:44] upgraded gcc-libs (4.6.1-3 -> 4.6.1-4)
[2011-08-27 14:44] upgraded gcc (4.6.1-3 -> 4.6.1-4)
[2011-08-27 14:44] upgraded gdk-pixbuf2 (2.23.5-1 -> 2.24.0-1)
[2011-08-27 14:44] upgraded logrotate (3.8.0-1 -> 3.8.0-2)
[2011-08-27 14:44] upgraded wine (1.3.26-1 -> 1.3.27-1)
[2011-08-27 14:44] upgraded wireshark-cli (1.6.1-2 -> 1.6.1-3)
[2011-08-27 14:44] upgraded wireshark-gtk (1.6.1-2 -> 1.6.1-3)
[2011-08-28 11:55] Running '/usr/bin/pacman -Syu'
[2011-08-28 11:55] synchronizing package lists
[2011-08-28 11:55] starting full system upgrade
[2011-08-28 11:55] upgraded mercurial (1.9.1-1 -> 1.9.2-1)
[2011-08-28 11:55] upgraded smbclient (3.6.0-4 -> 3.6.0-6)
[2011-08-28 11:55] Running '/usr/bin/pacman -Scc'
[2011-08-29 01:49] Running '/usr/bin/pacman -Syu'
[2011-08-29 01:49] synchronizing package lists
[2011-08-29 01:49] starting full system upgrade
[2011-08-29 01:50] upgraded libnotify (0.7.3-1 -> 0.7.4-1)
[2011-08-29 01:50] upgraded smbclient (3.6.0-6 -> 3.6.0-7)
[2011-08-29 23:59] Running '/usr/bin/pacman -Syu'
[2011-08-29 23:59] synchronizing package lists
[2011-08-29 23:59] starting full system upgrade
[2011-08-30 00:00] upgraded run-parts (3.4.4-1 -> 4.0.2-1)
[2011-08-30 00:00] upgraded ca-certificates (20110421-3 -> 20110502-1)
[2011-08-30 00:00] upgraded openbox (3.5.0-3 -> 3.5.0-4)
[2011-08-30 00:00] upgraded smbclient (3.6.0-7 -> 3.6.0-8)
[2011-08-30 00:00] upgraded vte-common (0.28.1-1 -> 0.28.2-1)
[2011-08-30 00:00] upgraded vte (0.28.1-1 -> 0.28.2-1)
[2011-08-30 00:16] Running '/usr/bin/pacman -Scc'
[2011-08-30 23:43] Running '/usr/bin/pacman -Syu'
[2011-08-30 23:43] synchronizing package lists
[2011-08-30 23:44] starting full system upgrade
[2011-08-30 23:44] upgraded imagemagick (6.7.1.6-1 -> 6.7.2.1-1)
[2011-08-30 23:44] upgraded lzo2 (2.05-1 -> 2.06-1)
[2011-08-30 23:44] Running '/usr/bin/pacman -Scc'
[2011-10-05 12:20] Running '/usr/bin/pacman -Syu'
[2011-10-05 12:20] synchronizing package lists
[2011-10-05 12:20] starting full system upgrade
Last edited by Lacsap (2011-10-05 21:40:13)Ok, I used https://www.archlinux.org/mirrorlist/ to generate a mirror list and retained the best score:
## Arch Linux repository mirrorlist
## Sorted by mirror score from mirror status page
## Generated on 2011-10-05
## Score: 1.8, France
#Server = http://distrib-coffee.ipsl.jussieu.fr/pub/linux/archlinux/$repo/os/$arch
## Score: 1.8, France
#Server = http://miroir.ezvan.fr/archlinux/$repo/os/$arch
## Score: 1.9, France
#Server = http://mir1.archlinux.fr/archlinux/$repo/os/$arch
## Score: 1.9, France
#Server = http://mir.archlinux.fr/$repo/os/$arch
## Score: 1.9, France
#Server = http://archlinux.polymorf.fr/$repo/os/$arch
## Score: 2.0, Switzerland
#Server = http://archlinux.puzzle.ch/$repo/os/$arch
## Score: 5.6, France
Server = http://archlinux.mirrors.ovh.net/archlinux/$repo/os/$arch
I ran the command:
# pacman -Syyu
:: Synchronisation des bases de données de paquets...
core 59,5K 158,3K/s 00:00:00 [######################] 100%
extra 886,5K 28,4K/s 00:00:31 [######################] 100%
community 454,4K 24,0K/s 00:00:19 [######################] 100%
:: Début de la mise à jour complète du système...
:: Remplacer pygobject par extra/python2-gobject2 ? [O/n] O
résolution des dépendances...
recherche des conflits entre paquets...
Suppression (1): pygobject-2.28.6-1
Taille totale des paquets (suppression): 1,83 Mo
Cibles (167): glib2-2.30.0-1 atk-2.2.0-1 glibmm-2.30.0-1 atkmm-2.22.5-1
xorg-server-common-1.10.4-1 xorg-server-1.10.4-1 zenity-3.2.0-1
Taille totale des paquets (téléchargement): 321,72 Mo
Taille totale des paquets (installation): 1371,45 Mo
Procéder à l'installation ? [O/n]
I will update tonight but my problem seems to be set ...
See you tonight. -
Strange behavior from Weblogic web server
This doesn't seem to be an EJB issue so I'm responding to the servlet
newsgroup. Also, why don't you try posting a simple example of the type of
html/javascript you are serving and/or open a support case with BEA Customer
support. Additionally, this link might help:
http://www.weblogic.com/docs51/classdocs/javadocs/weblogic/html/ScriptElement.html
Thanks,
Charlie
The views expressed in this posting are solely those of the author, and
BEA Systems, Inc. does not endorse any of
these views.
BEA Systems, Inc. is not responsible for the accuracy or completeness
of the information provided
and assumes no duty to correct, expand upon, delete or update any of
the information contained in this posting.
dwang wrote:
Hi:
I am using Weblogic web server to serve up my html/jsp pages. I also
have a javascript function to open up another window if I click on the
button. But when I click on the button, the index.html file from httpd
root directory is always displayed on the browser and the javascript
function is never being excuted completly(I have put an alert statement
on it and it only excuted the first line of statement). Can someone tell
me why?
Many thanks,
David -
Strange behavior from this forum?
Hello all,
did anybody ever experience this? I subscribes to a post because I wanted to see people's responses. I have now received three messages telling me that there are new posts on that entry. When I go to the post there ain't any.
The other weird thing about it is that it says that the question is answered and that there are two helpful responses. But I cannot see either of these.
Can someone please comment on this?
Thank you
Mireillethis particular post has no replies whatsoever.
There is little or no connection between those two points. What appears to have happened in that thread is that the OP marked it as answered without replying to the thread, either because it was never intended to be a question or the OP answered it without assistance from a Discussions member. When this happens, neither of the two available helpful ratings nor the solved can be awarded, and all of these are still listed as being available.
(28706) -
Strange behavior from script when dismounting content databases via PowerShell script
So, this is my first time posting a question here. I have taught myself PowerShell and for the most between friends, co-workers, or internet forums, I have been able to pick through most of the issues I have seen. This one has me stuck.
So, a little background, I have a script that goes through each web app in a farm, finds the database that hosts the root site, and detaches all other content databases from the farm. It also writes a csv file so that a process can come along after the
fact to re-attach the databases. I use this for patching so psconfig does not take quite as long as we have more than 50 content databases. Here is the odd part. After the first content database is detached, the second one is skipped, but
the remainder are detached. So, I have two databases left per web app. One that holds the root site and whatever the second database is after the first detach. If I comment out the line that actually does the detach, this does not happen.
Now, using ISE and adding break points, what I have found is that when I initially populate the array with the content databases ($var=$webapp.contentdatabase) all databases are in there. When I start the foreach, all databases are in there. Right
up to the point that I detach the first database, all databases are still in the array variable. As soon as I detach that database, the database that I detached gets removed from the array. It does this even if I set the variable to read only.
It only happens with the first database detached in each web app. I will try to explain this again with an example. This test farm has 4 databases. DB1, DB2, DB3, and DB4. DB1 holds the root site. The logic pulls the webapp info.
It gets the URL of the webapp. It takes that info and finds the site collection with that name (the root site). Finds the database name from there. It then gets a list of all databases in the webapp and starts to loop through. So the
first one in the list is DB1. It has the root site, so logic says do not delete. It comes back to the loop with the next database DB2. At this point, the array still has all 4 databases in the array. DB2 does not host the root site,
so the logic gathers information and calls dismount-spcontentdatabase. As soon as that is called, that database is removed from the array. So, at this point, we have processes postion 0 and position 1 in the array. Since the original position
1 has been removed, DB3 is now at postion 1. So, the loop continues. Sine we have now skipped DB3, we find DB4 and dismount. Now, we have in the array DB1,DB3, and DB4. My test environment has more and all are still there except for
the first one removed. I have banged my head against the desk with this one. If someone has some insight, I would appreciate it.
Here is the code that does it.
get-spwebapplication | foreach-object {
$webapp=$_
$waname=$webapp.displayname
$waurl=$webapp.url
$cdbs=$webapp.contentdatabases
$rsite=get-spsite $waurl -erroraction silentlycontinue
$rsitedb=$rsite.contentdatabase
$rsitedbn=$rsitedb.name
foreach ($cdb in $cdbs) {
$cdbs=$cdbs2
$cdbname=$cdb.name
#Write-Host "$cdbname" -foregroundcolor red
if ($cdbname -ne $rsitedbn) {
$warn=$cdb.warningsitecount
$max=$cdb.maximumsitecount
$current=$cdb.currentsitecount
$dbserver=$cdb.server
Write-output "$waname,$cdbname,$dbserver,$warn,$max,$current" >> $outfile
Write-host "dismounting $cdbname" -foregroundcolor green
dismount-spcontentdatabase -identity $cdbname -confirm:$false
else {
Write-host "$cdbname holds root site. No action." -foregroundcolor yellowwhat about keeping an array of all the non-root collections (may be database name) instead of dismounting them in the foreach loop of all the databases? After we have all the databases that need to be deleted, in a for loop starting with 0 and
counting to the number of databases, check the name of the database for each index and dismount that database
pseudo code would be
$dbstobedismounted = @()
foreach($cdb in $cdbs)
$dbstobedismounted + = $cdb.Name //instead of actually dismounting
for(int i=0;i<$webapp.ContentDataBases.Count;i++)
$dabasename = $webapp.ContentDataBases[i].Name
foreach($dbtobedismounted in $dbstobedismounted)
if($databasename -eq $dbtobedismounted )
dismount-spcontentdatabase -dentty $webapp.ContentDataBases[i]
I'm sure you might have to do some modifications to make it work, but the point I'm making is instead of dismounting in the foreach loop, have a list and dismount in another for loop. Hope it helps.
rani
Maybe you are looking for
-
Remote app on iPad connects to iTunes but then loses connection.
Hi, Basically, I can get the app on my iPad to connect to iTunes, but if I then start doing something else on my iPad, or my computer goes to sleep, then the remote won't connect again. Even if I wake my macbook and try to connect it again. If I pre
-
"communication error" when trying to print on an EPSON Stylus Photo R360
I have set up the printer on my n-basestation. It's visible through Bonjour. All drivers are installed, and Macbook Pro restarted. But, when I try to print my mac gives a "communication error" and nothing happens on the printer. I then installed Gute
-
Is there a way to submit a pdf form without redirecting my web page?
I have a fillable pdf form inside of a web page. When a user clicks on a submit button I have the pdf calling the submitform method. This redirects the web page to the url I specified inside of my pdf document. I don't want the web page to be redi
-
IPod won't connect to wifi, "Unable to connect to _____"?
I have an iPod that is a little under a year old. I got it in January of last year. I have 4.2.1 on it now, but shortly before I installed it my iPod wouldn't connect to any different wifi. I took it to a library and it wouldn't connect there, and it
-
How get LR5 from desktop to laptop with no disc drive
How can I get my LR5 loaded on my iMac copied to my MacBook Pro which has no disc drive?