Strange behavior in Preps 5 after Security Update 2012-001

After installing Security Update 2012-001 this morning, my Save dialog box no longer appears in Preps 5.0. Another iMac running 10.6.8 that was not updated has no problems. Any ideas how to fix this or a workaround?

Howdy,
Apparently some are reporting that this causes the older PowerPC (PPC) applications that are supported in 10.6 via 'Rosetta' to crash upon attempting to open/save/print using any dialog box, or fail in other similar ways such as simply not printing or quitting, or freezing/hanging/crashing of the application.
You might wish to read:
http://www.macintouch.com/readerreports/snowleopard/index.html#d02feb2012
If you are unsure if you are still using PowerPC apps, if the application is currently running, look under the 'Activity Monitior' (in Applications -> Utilities), or alternatively you could check in the System Profiler, Applications. Check the column "Type".
Here is a fairly simple way you can restore you system and restore you applications functionality again, if you don't have a recent clone or good Time Machine backup that you can restore from. If you do, restore from your backup prior to having installed the Security Update 2012-001.
Time Machine restore: http://support.apple.com/kb/ht1427
If you are restoring a backup made by a Mac to the same Mac
With your backup drive connected, start up your Mac from the Lion recovery partition (Command-R at startup) or Mac OS X v10.6 installation disc. Then use the "Restore From Time Machine Backup" utility. Select the backup prior to your issues, and it will be restored back to the state it was in at that time.
If you can't easily restore from a backup, you can instead do the following:
- You first start by reinstalling your OS X 10.6.x, this will preserve all your user data, your applications, no worries there.
- Then install the Mac OS X 10.6.8 Update Combo v1.1 (links provided below)
- Make sure you're printers are showing up correctly in your system preferences, if not, re-add the printers
- Then finally, run the Apple Software Update (by pulling down the Apple Menu), and install any and all remaining updates, except do not then re-install the Security Update 2012-001. It is possible that you may have to reboot after installing some of the updates, and you may even need to run it a 2nd time to make sure that you've got all updates, except NOT the Security Update 2012-001.
Links for 10.6.8 Update Combo v1.1:
http://support.apple.com/kb/DL1399
or the link to directly download this 1.09GB combo updater:
http://support.apple.com/downloads/DL1399/en_US/MacOSXUpdCombo10.6.8.dmg
Cheers,
Daniel Feldman
=======================
  MacMind
  Certified Member of the
  Apple Consultants Network
  Apple Certified (ACHDS)
  E-mail:  [email protected] 
  Phone:   1-408-454-6649
  URL : www.MacMind.com
=======================

Similar Messages

  • After Security update 2012-001 cannot save any Office 2004 file

    I installed the Office 2012-001 Security Update on a MacBook Pro running Macos 10.6.8
    After that, I opened an attached Excel file from an email (received with Entourage), I performed some formula changes and wanted to save the document with a different name. I saw some changes to the screen as if the File saving Window would appear, but instead the whole program crashed. I could not perform any further changes to the file, basically all of the menus were blank, including the Quit menu. I had to Force quit the program. I thought it was only Excel, but Word also behaves the same. I am able to open any Office file with the corresponding Pages-Numbers program and save the file in the appropriate Office format, but I cannot perform any changes using the Office programs. I am writing this question here on the Apple Support Communities because I am almost sure that this behavior happened after I installed the Security Update 2012-001. After reading some of the latest support questions, I performed a Permissions repair on the StartUp disk but nothing changed.
    Any suggestions will be very much appreciated.

    Also:
    Apparently some are reporting that this causes the older PowerPC (PPC) applications that are supported in 10.6 via 'Rosetta' to crash upon attempting to open/save/print using any dialog box, or fail in other similar ways such as simply not printing or quitting, or freezing/hanging/crashing of the application.
    You might wish to read:
    http://www.macintouch.com/readerreports/snowleopard/index.html#d02feb2012
    If you are unsure if you are still using PowerPC apps, if the application is currently running, look under the 'Activity Monitior' (in Applications -> Utilities), or alternatively you could check in the System Profiler, Applications. Check the column "Type".
    Here is a fairly simple way you can restore you system and restore you applications functionality again, if you don't have a recent clone or good Time Machine backup that you can restore from. If you do, restore from your backup prior to having installed the Security Update 2012-001.
    Time Machine restore: http://support.apple.com/kb/ht1427
    If you are restoring a backup made by a Mac to the same Mac
    With your backup drive connected, start up your Mac from the Lion recovery partition (Command-R at startup) or Mac OS X v10.6 installation disc. Then use the "Restore From Time Machine Backup" utility. Select the backup prior to your issues, and it will be restored back to the state it was in at that time.
    Cheers,
    Daniel Feldman
    =======================
      MacMind
      Certified Member of the
      Apple Consultants Network
      Apple Certified (ACHDS)
      E-mail:  [email protected] 
      Phone:   1-408-454-6649
      URL : www.MacMind.com
    =======================

  • Rosetta Problems after Security Update 2012-001

    My crack team of sys admins and I have devised a method for resolving some of the issues regarding the Security Update 2012-001 and Rosetta.
    http://www.educate-it.org/content.php?130-Rosetta-Issue-after-Security-Update-20 12-001
    Click this link for an Installer that will revert the files necessary for some Rosetta apps to run after the Security Update. This is a band-aid and is only recommended in emergency situations. Apple is currently working on a fix, but until that happens, we are stuck with reverse-engineering their update. I hope this helps those in distress from this update.

    Backup files off the computer (not TimeMachine) and disconnect.
    If you have TM, or a option key bootable clone use that to erase and restore from.
    If not, c boot off the 10.6 disk, use Disk Utility to >Repair Disk and Permissions,  (do not format or erase!!) and simply re--install 10.6 from the disk. Note: Does not touch your files and most programs, but backup your files regardless.
    Note: If Disk Repair gives a error that is not repaired, then you have to consider erasing the drive (with Zeros) and try reinstalling 10.6 fresh or replacing the drive.
    Reboot and log in, update to 10.6.8, it should not include the security update at this time (second pass it might show) because it was just released and they might need to pull it. (they need to pull it)
    When you reboot, make sure to reinstall any programs that installed kext files into OS X, you'll know, they won't work.
    If you get gray screen, hold the shift key and update your installed software so it's compatible with 10.6.8.
    Learn how to clone here
    http://www.bombich.com/get_ready_for_lion.html
    TM help here
    http://pondini.org/OSX/Home.html
    Learn how to make copies of your 10.6 disks here
    http://www.walterjessen.com/make-a-bootable-backup-snow-leopard-install-disc/
    Learn how to make a bootable SL USB
    http://www.maciverse.com/install-os-x-snow-leopard-from-usb-flash-drive.html
    Learn which programs ARE NOT compatible with Lion
    http://roaringapps.com/apps:table
    Long live the Snow Leopard.

  • Mac mini A1176 doesnt start after Security update 2012-001 (10.6.8)

    it has istalled 2Gb RAM insted of original 500Mb but it used to work well before the update

    Also:
    Apparently some are reporting that this causes the older PowerPC (PPC) applications that are supported in 10.6 via 'Rosetta' to crash upon attempting to open/save/print using any dialog box, or fail in other similar ways such as simply not printing or quitting, or freezing/hanging/crashing of the application.
    You might wish to read:
    http://www.macintouch.com/readerreports/snowleopard/index.html#d02feb2012
    If you are unsure if you are still using PowerPC apps, if the application is currently running, look under the 'Activity Monitior' (in Applications -> Utilities), or alternatively you could check in the System Profiler, Applications. Check the column "Type".
    Here is a fairly simple way you can restore you system and restore you applications functionality again, if you don't have a recent clone or good Time Machine backup that you can restore from. If you do, restore from your backup prior to having installed the Security Update 2012-001.
    Time Machine restore: http://support.apple.com/kb/ht1427
    If you are restoring a backup made by a Mac to the same Mac
    With your backup drive connected, start up your Mac from the Lion recovery partition (Command-R at startup) or Mac OS X v10.6 installation disc. Then use the "Restore From Time Machine Backup" utility. Select the backup prior to your issues, and it will be restored back to the state it was in at that time.
    Cheers,
    Daniel Feldman
    =======================
      MacMind
      Certified Member of the
      Apple Consultants Network
      Apple Certified (ACHDS)
      E-mail:  [email protected] 
      Phone:   1-408-454-6649
      URL : www.MacMind.com
    =======================

  • Problems after security update 2012-001, 1.1

    Two troubling occurrences after this install. Downloading software upgrade from Canon.com, I got Error 404. Reported it; rep said he had one other report like that. He was interested to hear I'd just installed the latest sec. update. He had me try several other urls, both of which gave error 404. He hasn't gotten back to me. Yet.
    Second, I applied for the instant credit card from Barclay in order to buy the new iPad. Completed the application and hit submit. The expected "Processing..." mini-window appeared but disappeared within seconds and I was returned to the application screen with no further activity from their side, and no email from them. The site finally timed out.
    Any ideas?

    casey451 wrote:
    I will continue to bug Canon.
    Even the Apple KB site had a problem of this sort at one time…
    It would be surprising if Barclay's, which is directly linked to the Apple site, would be unprepared to receive applications from people using Safari.
    I don't know… Nowadays, when it comes to banks, I'm ready to believe anything.
    Anyway, check their on-line banking help or support pages, they must state what browsers are supported.
    It's perfectly possible that they do support it and the issue is something else -- you may have cookies disabled, or JavaScript turned off, maybe even something related to the update. Again, it's the kind of stuff you should find on their support or help site.

  • After the latest Security Update 2012-001 (Mac OS X 10.6.8) my Adobe Photoshop CS 8, Dreamweaver 8, and InDesign CS programs crash when I try to save a file.

    After the latest Security Update 2012-001 (Mac OS X 10.6.8) my Adobe Photoshop CS 8, Dreamweaver 8, and InDesign CS programs crash when I try to save a file. HELP!!!

    Howdy,
    Apparently some are reporting that this causes the older PowerPC (PPC) applications that are supported in 10.6 via 'Rosetta' to crash upon attempting to open/save/print using any dialog box, or fail in other similar ways such as simply not printing or quitting, or freezing/hanging/crashing of the application.
    I have read of some companies that have indeed submitted proper bug reports to Apple, but that is not a guarantee of a bug-fix being issued.
    You might wish to read:
    http://www.macintouch.com/readerreports/snowleopard/index.html#d02feb2012
    If you are unsure if you are still using PowerPC apps, if the application is currently running, look under the 'Activity Monitior' (in Applications -> Utilities), or alternatively you could check in the System Profiler, Applications. Check the column "Type".
    Here is a fairly simple way you can restore you system and restore you applications functionality again, if you don't have a recent clone or good Time Machine backup that you can restore from. If you do, restore from your backup prior to having installed the Security Update 2012-001.
    Time Machine restore: http://support.apple.com/kb/ht1427
    If you are restoring a backup made by a Mac to the same Mac
    With your backup drive connected, start up your Mac from the Lion recovery partition (Command-R at startup) or Mac OS X v10.6 installation disc. Then use the "Restore From Time Machine Backup" utility. Select the backup prior to your issues, and it will be restored back to the state it was in at that time.
    If you can't easily restore from a backup, you can instead do the following:
    - You first start by reinstalling your OS X 10.6.x, this will preserve all your user data, your applications, no worries there.
    - Then install the Mac OS X 10.6.8 Update Combo v1.1 (links provided below)
    - Make sure you're printers are showing up correctly in your system preferences, if not, re-add the printers
    - Then finally, run the Apple Software Update (by pulling down the Apple Menu), and install any and all remaining updates, except do not then re-install the Security Update 2012-001. It is possible that you may have to reboot after installing some of the updates, and you may even need to run it a 2nd time to make sure that you've got all updates, except NOT the Security Update 2012-001.
    Links for 10.6.8 Update Combo v1.1:
    http://support.apple.com/kb/DL1399
    or the link to directly download this 1.09GB combo updater:
    http://support.apple.com/downloads/DL1399/en_US/MacOSXUpdCombo10.6.8.dmg
    Cheers,
    Daniel Feldman
    =======================
      MacMind
      Certified Member of the
      Apple Consultants Network
      Apple Certified (ACHDS)
      E-mail:  [email protected] 
      Phone:   1-408-454-6649
      URL : www.MacMind.com
    =======================

  • I have Microsoft Office 2004 on my MacBook (2.4 GHz Intel Core 2 Duo).  It is currently up to date with Microsoft updates.  I am running Mac OS 10.6.8.  I just updated my Mac software with "Security Update 2012-001".  I am now unable to print (Epson NX510

    I have Microsoft Office 2004 on my MacBook (2.4 GHz Intel Core 2 Duo).  It is currently up to date with Microsoft updates.  I am running Mac OS 10.6.8.  I just updated my Mac software with "Security Update 2012-001".  I am now unable to print (Epson NX510 printer) from Excel or Word.  When I click on the Print menu item in Excel, there is a flash in the background like it is trying to open the print window, but nothing else.  I am able to print from other programs like TextEdit, Mail or KakeidaGraph.  As far as I know I have the latest Epson print driver.
    Also, I am also unable to open an existing Excel or Word file from the open menu - both programs lock up and do not respond.  I have to force quit.  After I restart Excel or Word I can open an existing file by double clicking on the file, but if I again try to open another file from the open menu, Excel or Word lock up.
    Any similar problems?

    Howdy,
    Apparently some are reporting that this causes the older PowerPC (PPC) applications that are supported in 10.6 via 'Rosetta' to crash upon attempting to open/save/print using any dialog box, or fail in other similar ways such as simply not printing or quitting, or freezing/hanging/crashing of the application.
    I have read of some companies that have indeed submitted proper bug reports to Apple, but that is not a guarantee of a bug-fix being issued.
    You might wish to read:
    http://www.macintouch.com/readerreports/snowleopard/index.html#d02feb2012
    If you are unsure if you are still using PowerPC apps, if the application is currently running, look under the 'Activity Monitior' (in Applications -> Utilities), or alternatively you could check in the System Profiler, Applications. Check the column "Type".
    Here is a fairly simple way you can restore you system and restore you applications functionality again, if you don't have a recent clone or good Time Machine backup that you can restore from. If you do, restore from your backup prior to having installed the Security Update 2012-001.
    Time Machine restore: http://support.apple.com/kb/ht1427
    If you are restoring a backup made by a Mac to the same Mac
    With your backup drive connected, start up your Mac from the Lion recovery partition (Command-R at startup) or Mac OS X v10.6 installation disc. Then use the "Restore From Time Machine Backup" utility. Select the backup prior to your issues, and it will be restored back to the state it was in at that time.
    If you can't easily restore from a backup, you can instead do the following:
    - You first start by reinstalling your OS X 10.6.x, this will preserve all your user data, your applications, no worries there.
    - Then install the Mac OS X 10.6.8 Update Combo v1.1 (links provided below)
    - Make sure you're printers are showing up correctly in your system preferences, if not, re-add the printers
    - Then finally, run the Apple Software Update (by pulling down the Apple Menu), and install any and all remaining updates, except do not then re-install the Security Update 2012-001. It is possible that you may have to reboot after installing some of the updates, and you may even need to run it a 2nd time to make sure that you've got all updates, except NOT the Security Update 2012-001.
    Links for 10.6.8 Update Combo v1.1:
    http://support.apple.com/kb/DL1399
    or the link to directly download this 1.09GB combo updater:
    http://support.apple.com/downloads/DL1399/en_US/MacOSXUpdCombo10.6.8.dmg
    Cheers,
    Daniel Feldman
    =======================
      MacMind
      Certified Member of the
      Apple Consultants Network
      Apple Certified (ACHDS)
      E-mail:  [email protected] 
      Phone:   1-408-454-6649
      URL : www.MacMind.com
    =======================

  • HT1222 Has Apple acknowledged the problems with Security Update 2012-001?

    I've read a multitude of user forum comments about this update breaking user software, but have not found a single comment by an Apple representative.

    Howdy,
    Apparently some are reporting that this causes the older PowerPC (PPC) applications that are supported in 10.6 via 'Rosetta' to crash upon attempting to open/save/print using any dialog box, or fail in other similar ways such as simply not printing or quitting, or freezing/hanging/crashing of the application.
    I have read of some companies that have indeed submitted proper bug reports to Apple, but that is not a guarantee of a bug-fix being issued.
    You might wish to read:
    http://www.macintouch.com/readerreports/snowleopard/index.html#d02feb2012
    If you are unsure if you are still using PowerPC apps, if the application is currently running, look under the 'Activity Monitior' (in Applications -> Utilities), or alternatively you could check in the System Profiler, Applications. Check the column "Type".
    Here is a fairly simple way you can restore you system and restore you applications functionality again, if you don't have a recent clone or good Time Machine backup that you can restore from. If you do, restore from your backup prior to having installed the Security Update 2012-001.
    Time Machine restore: http://support.apple.com/kb/ht1427
    If you are restoring a backup made by a Mac to the same Mac
    With your backup drive connected, start up your Mac from the Lion recovery partition (Command-R at startup) or Mac OS X v10.6 installation disc. Then use the "Restore From Time Machine Backup" utility. Select the backup prior to your issues, and it will be restored back to the state it was in at that time.
    If you can't easily restore from a backup, you can instead do the following:
    - You first start by reinstalling your OS X 10.6.x, this will preserve all your user data, your applications, no worries there.
    - Then install the Mac OS X 10.6.8 Update Combo v1.1 (links provided below)
    - Make sure you're printers are showing up correctly in your system preferences, if not, re-add the printers
    - Then finally, run the Apple Software Update (by pulling down the Apple Menu), and install any and all remaining updates, except do not then re-install the Security Update 2012-001. It is possible that you may have to reboot after installing some of the updates, and you may even need to run it a 2nd time to make sure that you've got all updates, except NOT the Security Update 2012-001.
    Links for 10.6.8 Update Combo v1.1:
    http://support.apple.com/kb/DL1399
    or the link to directly download this 1.09GB combo updater:
    http://support.apple.com/downloads/DL1399/en_US/MacOSXUpdCombo10.6.8.dmg
    Cheers,
    Daniel Feldman
    =======================
      MacMind
      Certified Member of the
      Apple Consultants Network
      Apple Certified (ACHDS)
      E-mail:  [email protected] 
      Phone:   1-408-454-6649
      URL : www.MacMind.com
    =======================

  • Security Update 2012-001 Will Not Install

    When I try runnng Software Update to install Security Update 2012-001 I get "An unexpected error has occured." at the end of the installation process.  I tried downloading the standalone installer but that fails too.
    Any ideas?

    Christopher Chew wrote:
    Tried the above suggestions and none of them worked.
    I tried an re-install of 10.6 from my system disk and upgrading that.  The combo update fails too.
    I tried wiping the partition and doing a complete restore from a Time Machine backup.  Still same error.
    When I have time I could try wiping the parition, reinstalling 10.6 and using Migration Assistant instead of a straight restore.
    One more thing.  I installed a Boot Camp partition about a month ago.  Could that have something to do with this?
    Thanks.
    Possible some  corruption occured to the MBR section of your GPT,  boot sector virus on Windows?
    Bad Bootcamp updated the GPT wrong perhaps?
    Could be OS X on TM is hosed too, can't trust that then.
    Fresh install it is then, cures all ills. Follow on.
    Hold c boot off the 10.6 disk, use Disk Utility there to select your entire internal drive on the far left (you got backups right? because all is going bye bye including Windows)
    Next chose Erase and Security option Zero All Data, come back after lunch. this will check the drive really good for bad bits/sectors, takes a bit of time though.
    Next chose Partiton and Option: GUID, format OS X Extended (J) and give it the same name, click apply. This will rebuilt the GPT in case it was corrupted.
    Install 10.6, reboot and update to 10.6.8., c boot off the 10.6 disk and Repair Disk just in case.
    Prefereably you should clone your pristine 10.6.8 install first to a blank external drive, you can always option boot off of it.
    http://www.bombich.com/get_ready_for_lion.html
    You can then  try restore from TM or just go ahead and install programs from fresh sources and just use Migration Assistant to bring your user back.
    If your problems continue after migration assistant, then option boot and reverse clone. how to cherry pick your files off a corrupt TM drive is no easy matter, may need DataRescue $99.
    Far as cloning Windows bootcamp later when you reinstall it, you need the free WinClone on Macupdate.com.
    you should be fully armed now.
    Good Luck.

  • HT5130 Unable to  install Security Update 2012-001 for Mac OS 10.6.8

    Have just tried to install Security Update 2012-001 for Mac OS 10.6.8 and get message saying cannot download. Download stalls at Zero kB downloaded. Dialog says an error occurred during download.
    Internet connection is fine and first time denial has occurred.

    Looking at all the posts about the deficiencies of this update, you may have just lucked out, especially if you are, like many of us, still running PowerPC programs under Rosetta.

  • I just wanted to chip in with my complaint that I just downloaded the Security Update 2012-001 10.6.8, and now non of my Office 2004 apps work appropriately.  I can open existing word documents, but they won't print) etc. When will apple issue a fix?

    While I wait for apple to fix this issue, is there an easier fix to this than using Time Machine to restore to an earlier version?

    Apple just issued an "update on the update" that seems to have fixed the problem (Security Update 2012.001 v1.1, see:  http://tidbits.com/article/12768).  All my Word 94 apps now seem to function properly.  Haven't checked everything yet, but the ability to print has been restored.
    Thanks Apple!!!!
    (I am once again your loyal fan!!!)

  • Security Update 2012-001 Version 1.1 broke Autodesk Mental Ray?

    I ran Security Update 2012-001 Version 1.1 last night. Now, I can't render using the Mental Ray option in Maya 2011 (Hotfix 3 x64). I had just rendered before I ran the update.

    Hopefully this is a coincidence. If not, then our FIX for the FIX is yet another failure.

  • Today's Security Update 2012-001 is POISON to PowerPC/Rosetta apps  on Snow leopard!

    First time I've ever had a routine Security Update cause me problems with OS-X, ever.
    Today's Security Update 2012-001   is absolutely crashing my PowerPC/Rosetta apps on Snow Leopard .
    Every time to try to OPEN... SAVE or Save as ...PRINT  , you will get an instant hard crash.
    I still use AppleWorks 6 for all my business correspondence , and have quite a few other PPC apps.
    This security update is poison.
    Other forums, such as Macintouch , are reporting this. it seems to be affecting almost everyone , regardless of hardware system.
    It appears enything and everything PPC will crash , even Apple's own older PPC/Rosetta apps .
    SU 2012-001 for Snow Leopard obviously was not tested well, if at all.
    Apple MUST fix this ASAP, no matter how much they want to divorce Rosetta and PPC technology for the OS. There is no excuse for dispatching a system software update that  has such damaging issues. 
    I have no need for Lion 10.7 whatsoever , but I do need my Rosetta apps every day... and Apple just crashed them.
    -dewey
    cody wyoming
    2008 iMac Core2Duo , SL 10.6.8

    Backup files off the computer (not TimeMachine) and disconnect.
    If you have TM, or a option key bootable clone use that to erase and restore from.
    If not, c boot off the 10.6 disk, use Disk Utility to >Repair Disk and Permissions,  (do not format or erase!!) and simply re--install 10.6
    Note: If Disk Repair gives a error that is not repaired, then you have to consider erasing the drive (with Zeros) and try reinstalling 10.6 fresh or replacing the drive.
    Reboot and log in, update to 10.6.8, it should not include the security update at this time (second pass it might show) because it was just released and they might need to pull it. (they need to pull it)
    When you reboot, make sure to reinstall any programs that installed kext files into OS X, you'll know, they won't work.
    If you get gray screen, hold the shift key and update your installed software so it's compatible with 10.6.8.
    Learn how to clone here
    http://www.bombich.com/get_ready_for_lion.html
    TM help here
    http://pondini.org/OSX/Home.html
    Learn how to make copies of your 10.6 disks here
    http://www.walterjessen.com/make-a-bootable-backup-snow-leopard-install-disc/
    Learn how to make a bootable SL USB
    http://www.maciverse.com/install-os-x-snow-leopard-from-usb-flash-drive.html
    Learn which programs ARE NOT compatible with Lion
    http://roaringapps.com/apps:table
    Long live the Snow Leopard.

  • Security update 2012-001 kills adobe creative suite

    I just did an update:
    Remote Desktop Client Update 3.5.2
    Security Update 2012-001 1.0
    And now none of the applications in my Adobe Creative Suite work. I cannot use the "Open" command or the "Savre" command. Tha applications just quit. I make my living with these programs and am not pleased with Apple. Apple knows Mac people use these programs - that's why we'reMac people!!
    I created a new prefs file - no luck.
    I reinstalled Photoshop - no luck.
    I tried a new user profile - no luck.
    Anybody got any suggestions or ideas?
    Thanks

    Same here.  I use Photoshop CS Vers 8. Did security update and *poof*. Constantly crashes when I try to save and save as.
    Tried completely deleting Photoshop and all related preferences and folders in the Library.  Even tried booting in safe mode.  NADA, still bonks out.  Looking to see if can uninstall update if that's even possible.
    Glad (I think) I'm not the only one.
    Mac Pro
    Quad core Duo 3GHz
    12GB Ram
    FIX IT PLZ 10q!
    -Dk

  • Security update 2012-001

    Installing Security Update 2012-001 resulted in the inability to launch iMovie 4 (yes, the PPC version 4 which does run on my Intel iMac).  Please help us undo this update, as iMovie 4 is the heartbeat of my studio.
    Running Intel iMac with 10.6.8

    Backup files off the computer (not TimeMachine) and disconnect.
    If you have TM, or a option key bootable clone use that to erase and restore from.
    If not, c boot off the 10.6 disk, use Disk Utility to >Repair Disk and Permissions,  (do not format or erase!!) and simply re--install 10.6 from the disk. Note: Does not touch your files and most programs, but backup your files regardless.
    Note: If Disk Repair gives a error that is not repaired, then you have to consider erasing the drive (with Zeros) and try reinstalling 10.6 fresh or replacing the drive.
    Reboot and log in, update to 10.6.8, it should not include the security update at this time (second pass it might show) because it was just released and they might need to pull it. (they need to pull it)
    When you reboot, make sure to reinstall any programs that installed kext files into OS X, you'll know, they won't work.
    If you get gray screen, hold the shift key and update your installed software so it's compatible with 10.6.8.
    Learn how to clone here
    http://www.bombich.com/get_ready_for_lion.html
    TM help here
    http://pondini.org/OSX/Home.html
    Learn how to make copies of your 10.6 disks here
    http://www.walterjessen.com/make-a-bootable-backup-snow-leopard-install-disc/
    Learn how to make a bootable SL USB
    http://www.maciverse.com/install-os-x-snow-leopard-from-usb-flash-drive.html
    Learn which programs ARE NOT compatible with Lion
    http://roaringapps.com/apps:table
    Long live the Snow Leopard.

Maybe you are looking for

  • Read only filesystem problem

    Hi, I have a strange problem. After some time of running archlinux the root filesystem suddenly becomes read-only. It happened 3 times yet. I'm using LVM and the root volume is /dev/mapper/VG0-archlinux2 and filesystem type is reiserfs. If i tried to

  • Music on my iPhone 5 won't play and is grayed out. HELP!

    I got my iPhone 5 about a year ago and I never had any problems with my music until now. About 2 hours ago, I wanted to download a new song. So after it downloaded, my 4 most recent songs I had downloaded from iTunes the day before became grayed out

  • Can't add a new user or group in Workgroup Manager

    Here's the error: Error of type eDSRecordNotFound (-14136) on line 1268 of /SourceCache/WorkgroupManager/WorkgroupManager-361.2.1/PMMUGMainView.mm

  • Read File Format Issue

    Hi, I have an input file as below: 12020090707000000000000000000000005|C320|FAI|20000140|FFS000425|10|0 12020090707000000000000000000000005|C320|FAI|20000140|FFS000425|40|0|1234567890 12020090707000000000000000000000006|C320|FAI|20000141|FFS000426|10

  • Message Mapping Issue with data without namespace

    Hi, I have a common xsd imported which has its own target namespace into my SWC namespace. Based on this xsd I have generated a Message Interface and webservice and given the wsdl to third party system for invoking my webservice. The problem is I hav