Strange behavior when I try to match a mpeg2 video with the menu size image

hello all,
got a strange behavior when I try to match a mpeg2 video with the menu size image,
menu size is 1920 x 1080 (photoshop file)
mpeg2 video 1920 x 1080 (1second 19 frames)
the idea is to go from the menu link to the next sub menu with a video as transition, using the same image on the video as the menu and then zooming in (in my case through a door) to end up after the zoom in the next level menu.
I try to achieve a smooth change from the first play menu picture to the video image into the next level menu picture,
everything works good but when I watch it on the preview mode on the left and right side of the video it shows a black bar at least 15 to 25 pixel wide, that means the video image appears smaller and it causes a little jump what is preety disturbing and can not be sold as a professional work.
why encore treats the video size and picture differently?
it's gratful appreciated if somebody who got experience in a transition I mentioned obove posting any solution,
thankl you all

Hi all
I'm having a very similar problem with Encore. My menu items are distorting (a minor but infuriating squashing top and bottom) when previewed.
Using Encore,PS,AE CS4
DVD format SD PAL DV widescreen
I created 3 menu frameworks and 3 video transistions to link them in AE. On the final frame of each transistion in AE I saved the frame with Composition>Save Frame to> Photoshop Layers. In PS i added the button functionality and saved.
In Encore I use Dynamic link to import AE transistions as timelines and imported each PS menu twice, once as "menu" and once as an asset.
When I link the timeline transistions to the menu and preview at the point the menu begins the whole image is squashed. When the next transistion is activated the image returns to its original size.
Thinking it was the use of PS that was causing the menus to distort I used the menu asset directly in the time line. Obviously no menu functionality but also no distortion. The AE transistion flowed straight into the "menu" just as I expected.
In the properties panel the menu Aspect Ratio 16:9
The AE transistions PAR is SD PALwidescreen 1.4587.
I did try the Blu Ray suggestion above but the same distortion was apparent.
Any suggestions short of squashing the video to match the menu would be welcomed.
Thanks

Similar Messages

  • My iphone 4s well not change. I had a new battery put in. when i try and plug it comes up with the low batter siqn

    my iphone 4s well not change. I had a new battery put in. when i try and plug it comes up with the low batter siqn

    thebee88 wrote:
    I had a new battery put in.
    Who did that? I'm assuming not Apple, correct? Take the phone back to whoever replaced the battery & have them fix things.
    Be aware: Apple does not sell iPhone parts or batteries, thus there is no legitimate source for such.

  • HT4623 My iPad 1 keeps freezing when I try to set up an account with the apple store .Insert all details including payment details. The screen turns grey colour and then freezes. Help,,,,,,

    My iPad 1keeps freezing every time I try to access apple store. I complete all the information including payment account details lithe screen turns grey colour and then freezes . Help please.

    App store or Apple store

  • When I try to make a new video, a window comes up that says,"The operation could not be completed," and then under it, it says,"No other information is available about the problem," what is happening and how do I fix it?

    when I try to make a new video, a window comes up that says,"The operation could not be completed," and then under it, it says,"No other information is available about the problem," what is happening and how do I fix it?

    Hi
    And without info - it's near to impossibly to help. Try my general troubleshooting note:
    Troubleshooting note
    When iMovie doesn't work as intended this can be due to a lot of reasons
    iMovie Pref files got corrupted - trash it/they and iMovie makes new and error free one's
    problem in iMovie Cache folder - trash Cache.mov and Cache.plist
    Creating a new User-Account and log into this
    This forces iMovie to create all pref. and cache files new and error free
    Event or Project got corrupted - try to make a copy and repair
    a Codec is used that doesn't work (even though iMovie and/or iDVD tries to / they fail in the end)
    version miss match of QuickTime Player / iMovie / iDVD
    preferences are wrong - Repair Preferences
    other hard disk problem - Repair Hard Disk (Disk Util tool - but start Mac from ext HD or DVD)
    External hard disks - MUST BE - Mac OS Extended (hfs) formatted to work with Video
    ( UNIX/DOS/FAT32/Mac OS Exchange - works for most other things - but not for Video )
    USB-flash-memories - usually do not work
    Net-work connected hard disks - usually do not work (most often not fast enough and WRONGLY FORMATTES as DOS etc)
    iPhoto Library got problems - let iPhoto select another one or repair it. Re-build this first then try to re-start iMovie. When iMovie starts-up it first look trough this iPhoto library and if faulty it all Halt’s.
    This You do by
    First -  close iPhoto
    Secondly - on start up of iPhoto - Keep {cmd and alt-keys down}
    Thirdly - now select all five options presented
    THEN - WAIT a long long time (>20 hours are not strange)
    free space on Start-Up (Mac OS) hard disk to low (<1Gb) - I never go under 25Gb free space for SD-Video (4-5 times more for HD)
    external devices interferes - turn off Mac - disconnect all of them and - Start up again and re-try
    GarageBand fix - start GB - play a few notes - Close it again and now try iMovie
    Screen must be set to million-colors
    Third-party plug-ins doesn't work OK
    Run "Cache Out X", clear out all caches and restarts the Mac
    Let Your Mac be turned on during one night. At about midnight there is a set of maintenance programs that runs and tidying up. This might help
    Turn off Your Mac - and disconnect Mains - for about 20-30 minutes - at least this resets the FireWire port.
    In QuickTime - DivX, 3ivx codec, Flip4Mac, Perian etc - might be problematic - temporarily move them out and re-try
    (I deleted the file "3ivxVideoCodec.component" located in Mac HD/Library/Quicktime and this resolved my issue.)
    buenrodri wrote
    I solved the problem by removing the file: 3ivxVideoCodec.component. after that, up-dated iMovie runs ok.
    Last resort: Trash all of iMovie and re-install it
    Yours Bengt W

  • I recently updated to the latest version of Itunes (11.1) and when i try to play music or tv shows, the sound lasts only for a second before going completely mute, anyone know how to fix this?

    recently updated to the latest version of Itunes (11.1) and when i try to play music or tv shows, the sound lasts only for a second before going completely mute, anyone know how to fix this?

    Check this thread out -> iTunes 10.4 & Multimedia Keyboard
    It doesn't look like there is a fix yet, but some people in the thread are pointing to this workaround:
    pikot wrote:
    Following some suggestion i seem to have found a solution for the problem and my play/pause, next and previous buttons work with iTunes 10.4.1
    - You need to open a text editor (like notepad) as an administrator.
    - Open the SetPoint players.ini file (C:\Program Files\Logitech\SetPointP\players.ini)
    - Edit the line under the [Players] section to match the line bellow (bold is the wndClass which is to be changed)
    iTunes=wac,iTunes.exe,ITWindow,xxx,xxx,xxx,xxx,xxx,xxx,xxx,0,1,iTunes
    - Save the file
    - Restart the SetPoint and hopefully play/pause, next and previous buttons should work (at least they work for me)

  • HT5621 I bought my iMac from someone. Everything was changed over to my name however when I try to update programs it only shows the old users apple ID and I can't update. How do I change this so I can update the applications and have everything fully und

    I bought my iMac from someone. Everything was changed over to my name however when I try to update programs it only shows the old users apple ID and I can't update. How do I change this so I can update the applications and have everything fully under me?

    The first thing to do with a second-hand computer is to erase the internal drive and install a clean copy of OS X. You — not the previous owner — must do that. How you do it depends on the model, and on whether you already own another Mac. If you're not sure of the model, enter the serial number on this page. Then find the model on this page to see what OS version was originally installed.
    1. You don't own another Mac.
    If the machine shipped with OS X 10.4 or 10.5, you need a boxed and shrink-wrapped retail Snow Leopard (OS X 10.6) installation disc from the Apple Store or a reputable reseller — not from eBay or anything of the kind. If the machine has less than 1 GB of memory, you'll need to add more in order to install 10.6. Preferably, install as much memory as it can take, according to the technical specifications.
    If the machine shipped with OS X 10.6, you need the installation media that came with it: gray installation discs, or a USB flash drive for some MacBook Air models. For early MBA models, you may need a USB optical drive or Remote Disc. You should have received the media from the previous owner, but if you didn't, order replacements from Apple. A retail disc, or the gray discs from another model, will not work.
    To boot from an optical disc or a flash drive, insert it, then reboot and hold down the C key at the startup chime. Release the key when you see the gray Apple logo on the screen.
    If the machine shipped with OS X 10.7 or later, you don't need media. It should boot into Internet Recovery mode when you hold down the key combination option-command-R at the startup chime. Release the keys when you see a spinning globe.
    2. You do own another Mac.
    If you already own another Mac that was upgraded in the App Store to the version of OS X that you want to install, and if the new Mac is compatible with it, then you can install it. Use Recovery Disk Assistant to create a bootable USB device and boot the new Mac from it by holding down the C key at the startup chime. Alternatively, if you have a Time Machine backup of OS X 10.7.3 or later on an external hard drive (not a Time Capsule or other network device), you can boot from that by holding down the option key and selecting it from the row of icons that appears. Note that if your other Mac was never upgraded in the App Store, you can't use this method.
    Once booted in Recovery, launch Disk Utility and select the icon of the internal drive — not any of the volume icons nested beneath it. In the Partition tab, select the default options: a GUID partition table with one data volume in Mac OS Extended (Journaled) format. This operation will permanently remove all existing data on the drive.
    After partitioning, quit Disk Utility and run the OS X Installer. You will need the Apple ID and password that you used to upgrade. When the installation is done, the system will automatically reboot into the Setup Assistant, which will prompt you to transfer the data from another Mac, its backups, or from a Windows computer. If you have any data to transfer, this is usually the best time to do it.
    Then run Software Update and install all available system updates from Apple. To upgrade to a major version of OS X newer than 10.6, get it from the Mac App Store. Note that you can't keep an upgraded version that was installed by the previous owner. He or she can't legally transfer it to you, and without the Apple ID you won't be able to update it in Software Update or reinstall, if that becomes necessary. The same goes for any App Store products that the previous owner installed — you have to repurchase them.
    3. Other issues
    If you see a lock screen when trying to boot from installation media or in Recovery mode, then a firmware password was set by the previous owner, or the machine was remotely locked via iCloud. You'll either have to contact the owner or take the machine to an Apple Store or another authorized service provider to be unlocked. You may be asked for proof of ownership.
    If the previous owner "accepted" the bundled iLife applications (iPhoto, iMovie, and Garage Band) in the App Store so that he or she could update them, then they're linked to that Apple ID and you won't be able to download them without buying them. Reportedly, Mac App Store Customer Service has sometimes issued redemption codes for these apps to second owners who asked.
    If the previous owner didn't deauthorize the computer in the iTunes Store under his Apple ID, you wont be able to  authorize it immediately under your ID. In that case, you'll either have to wait up to 90 days or contact iTunes Support.
    When trying to create a new iCloud account, you might get a failure message: "Account limit reached." Apple imposes a limit of three iCloud account setups per device. Erasing the device does not reset the limit. You can still use an account that was created on another device, but you won't be able to create a new one. Contact iCloud Support for more information.

  • My iphone is no longer working I have black screen with a picture of the itunes logo and a USB cable.  When I try to connect my iphone to itunes the device is not detected, can anyone help me? I desperatley need my phone back

    My iphone is no longer working I have black screen with a picture of the itunes logo and a USB cable.  When I try to connect my iphone to itunes the device is not detected, can anyone help me? I desperatley need my phone back

    I have had a 3GS for 2+ years.  After upgrading to IOS 4 (now 4.3.5) I began having problems.  In the past week, my screen went to the itunes logo and USB cable twice -- unprovoked -- just found it sitting there like that!  I connected to itunes and it did restore from a backup but it is a major inconvenience.  I am also searching for answers, but better back-up regularly!

  • Firefox freezes when I try to open my emails and use the internet, what can I do?

    Use Mozilla Firefox to see my emails and use the internet from about one week when I try to see my emails or use the internet it takes me to another wed site or gets freezes I am worry about because I don't know what's going up. This is the first time it happening to me. It says Firefox can not work properly it will close and I can lose some information, or click to star a new session but it never starts again it got freeze and I have to shut down the computer.

    Use internet explorer as your default until this issue is resolved. Under Firefox, hotmail live will not load my email folders. No problem using internet explorer.

  • I redeemed a gift card, the amount shows up in the top right corner but when I try to purchase music it goes to the account that I have loaded. How do I use the gift card?

    I redeemed a gift card, the amount shows up in the top right corner of my account but when I try to purchase music it goes to the account that I have loaded previously. How do I use the gift card?

    If the amount of the purchase is close to $21.07, then you need to take into account taxes may be added.
    If you go beyond the credit from a gift card the balance will be billed to your credit card account.

  • I have 2 accounts in my family and would like to purchase some of the same songs for both accounts, however when I try to purchase a duplicate song from the second account the song says play instead of purchase. How can I get some of the same songs?

    I have 2 accounts in my family and would like to purchase some of the same songs for both accounts, however when I try to purchase a duplicate song from the second account the song says play instead of purchase. How can I get some of the same songs?

    Drrhythm2 wrote:
    What's the best solution for this? I
    Copy the entire /Music/iTunes/ folder from her old compouter to /Music/ in her account on this new computer.

  • When i try to set up my icloud account the system says it is sending me an email to verify.  I never get the email and it is not in my spam filter.  How can i get set up??

    when i try to set up my icloud account the system says it is sending me an email to verify.  I never get the email and it is not in my spam filter.  How can i get set up??

    Make sure that your Apple ID is your email address and you do not have any other or old IDs associated with you. Go to www.appleid.apple.com and confirm this info. Make sure that the email address you are trying to sign up with is your primary one.

  • I have all my music cd's on a hard drive as wav files when I try to add them to I tunes the files get there but no album info I end up with a bunch of track 1's by unknown artists. Is there a way to transfer each album over so it shows up like a normal CD

    I have all my music cd's on a hard drive as wav files when I try to add them to I tunes the files get there but no album info I end up with a bunch of track 1's by unknown artists. Is there a way to transfer each album over so it shows up like a normal CD

    Try posting in a more appropriate forum, as this has noting to do with itunes U - the place where University/college/museums post education material.

  • TS1702 When I try and access March 2013 in Calendar the app simply closes.  This happens if I click March in the month tape at bottom of screen or if I try swiping from February or April. Is there a fix, I've tried restarting the app and the iPad to no af

    When I try and access March 2013 in Calendar the app simply closes.  This happens if I click March in the month tape at bottom of screen or if I try swiping from February or April. Is there a fix, I've tried restarting the app and the iPad to no affect

    See this discussion with the exact same issue:
    https://discussions.apple.com/thread/4690697?tstart=0

  • My Photoshop CS 5 has some strange actions when I copy a portion of a photo using the clone stamp  to transfer to another part of the image. It carries the entire layer (not just the stamps selection) across the screen and I cannot place it where I need t

    My Photoshop CS 5 has some strange actions when I copy a portion of a photo using the clone stamp  to transfer to another part of the image. It carries the entire layer (not just the stamps selection) across the screen and I cannot place it where I need to. It appears as if I selected the entire layer on purpose (which I did not)
    The below items appeared when I opened Photoshop CS 5:
    “Photoshop has encountered a problem with the display driver and has temporarily disabled G & U enhancements. Check the video card malfunctions website for latest software. GPU enhancements can be enabled in the performance panel of preferences.”
    (I believe this started after the automatically updated Windows was applied. It was coincident with the before mentioned problem . . . but I don’t really know if it had anything to do with it. )

    For the Clone Stamp problem, check the Clone Source panel and Clipped is probably unchecked.
    If so, check Clipped and see if that makes a difference.
    (Window>Clone Source)
    As to the video card problem:
    Which version of windows are you using?
    What is the make and model of your graphics card?
    Do you know which update windows installed?

  • After installing a new version of Firefox, I get the error message "The procedure entry point JS_GetOperationLimit could not be located in the dynamic link library js3250.dll" when I try to start firefox. Elsewhere in the forum a complete reinstall is su

    After installing a new version of Firefox, I get the error message "The procedure entry point JS_GetOperationLimit could not be located in the dynamic link library js3250.dll" when I try to start firefox. Elsewhere in the forum a complete reinstall is suggested; however, I can't do that because of my company's IT policies. Is there any way to solve this problem WITHOUT a complete reinstall? Thank you!
    == This happened ==
    Every time Firefox opened
    == I installed a new version ==
    == User Agent ==
    Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 5.1; GTB6; .NET CLR 1.1.4322; .NET CLR 2.0.50727; .NET CLR 3.0.04506.30; .NET CLR 3.0.04506.648)

    If you can't reinstall Firefox yourself then you need to contact your IT department and ask them to check the Firefox installation.
    It is possible that some files got broken with the latest update.

Maybe you are looking for

  • How to deploy an application in OC4J standalone?

    I'm trying to deploy Jspell 2004 in a standalone OC4J 10g. All my attempts have failed thus far, as I admit, I don't really know what I am doing. I've found several articles, including those from Jspell, and they all start with 'deploy the war file'

  • Cropping not maintained from Bridge to PS when batch processing

    This is the oddest thing, because it has never happened before. I am sending images that are cropped in Bridge to a Photoshop batch process (just image resize and sharpening), but they are showing up in the new folder un-cropped. Anybody seen this be

  • Adobe muse like feature in Reflow

    When can we expect to have adobe muse like features e.g., widgets, library etc to be included in reflow? One thing I don't like about muse that I like about reflow is that it export somewhat sematic html, css, So, its re usable. Having muse like widg

  • Xml file with Attachment-- File Adapter

    HI, I have a zip file which has an XML and a corresponding pdf file, with these files I need to create a target xml structure which is the original XML+ Additional tag containing the <bas64> of the pdf. I intend to write a module which could parse th

  • Transaction variant for ME22N

    Dear Expert, I have created transaction variant using SHD0 from the original transaction ME22N ( change Purchase order) , my purpose to do this is i want to create new transaction code ZME22N which only the delivery schedule date can be changed, whil