Strange behavior when shutting down - only works once

Hi there,
I'm taking advice from around the forum to create a shutdown button for my VI. When the user sends the shutdown command, the loop stops all processes running and turns off all heaters. Then when this is complete it passes a shutdown variable to all loops allowing them to close. This seems to work perfectly once, but when I hit run again and test it again, it fails. If I abort the VI and restart again, the shutdown works. I can't quite figure out what the behavior is doing here.
Attached is my program, it's a little messy but everything works, and it has to be added to by someone who isn't me, so I tried to keep everything clear and seperate. If anyone's got any ideas as to what is causing this strange behavior I'd love to hear it.
Thanks,
Chris.
Attachments:
Main VI.vi ‏259 KB

First of all, your event loop should look something more like this.  Otherwise you won't exit the loop until another event comes through.
Secondly, I think you are writing to the wrong control here (this is in your timed loop).  I have no clue what is in the subVI, but I don't think it should be looking at the Shutdown PB control.  That control should be in it's event case.  But here you are trying to cause the shutdown event, but you are writing to the wrong control.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines
Attachments:
Event Structure issue.png ‏10 KB
wrong property node.png ‏3 KB

Similar Messages

  • Strange Beep When Shutting Down

    Today, when shutting down Windows, I received a strange beep from my MSI Mega 865.  I checked the temp, and it's only 48C.  Any ideas on what would make it beep when it shuts down?
    Note:  This noise came as soon as I chose to shut down, and prior to any shut down routines actually running, not towards the end of shutting down.
    Might be hyper sensitivity on my part, but any strange noise from this Mega PC is highly disconcerting for me.

    You guys are going to think I'm beep happy here  , but tonight, when emptying the trash bin, I got another strange beep.  The sound is very low, hard to hear, but it is there.
    Would my HardDrive firing up / spinning cause some type of system beep?  Cause that sucker spun up pretty hard/fast when I emptied the recycle bin.

  • Purchased Lion, installed it - once I log in - i get the curtain and message to hold the power button till it shuts down.  Worked with the disk repair utility - fixed permissions - still can't get past the "black curtain of death"  any suggestions?

    purchased Lion, installed it - once I log in - i get the curtain and message to hold the power button till it shuts down.  Worked with the disk repair utility - fixed permissions  to hold the power button till it shuts down.  Worked with the disk repair utility - fixed permissions - still can't get past the "black curtain of death"  any suggestions?
    My machine was patched to date 10.x.x.  I was lucky to get an internet connection and I selected the option to re-download Lion... its curruently being downloaded.  What if that doesn't work?
    Any thougths would be appreciated.
    Joe

    And you have a workstation? not a notebook. 
    Usually a driver or hardware, nothing that Disk utility will fix.
    You know of course what a Prohititory Sign is?
    prohibitory sign, kernel panic
    Forum devoted to Lion:
    Mac OS X v10.7 Lion Communities
    Tips and FAQs
    FAQ kernelpanic
    Resolving Kernel Panics
    Avoiding eliminating Kernel panics
    Lion App Compatibility Table - RoaringApps
    RoaringApps Mac OS X Lion Application Compatibility
    did you make sure your apps, drivers, and hardware support Lion?

  • R500 Restarts when shutting down

    i have a R500 that has windows 7 on it when i goto shutdown it shutsdown and then 2-3 sec later it starts back up on its own.  i have flashed bios, set bios defaults,  ran diagnostics and everything checks out ok.  i have also reinstalled windows 7 and im still getting getting same problem. 
    Any suggestions would be appreciated...this is racking my mind

    i was able to start up my mini after a unpluges the power cord. then was also able to shut it down in the regular fasion.
    im going to do that after this post to be sure and i will edit this post and let you know it it still shuts down as it should........be back in a few!
    applesinafton
    Edit
    Ok, i guess it only worked once for me which it not a solutioin. tried to shut down and it rebooted. I should have tried twice from the get go but did not.
    if anyone, or the great folks @ Apple can come up with a fix im sure i will gwt a email from the forum if someone posts something!
    sorry fellas!
    Applesinafton

  • Strange behavior when I try to match a mpeg2 video with the menu size image

    hello all,
    got a strange behavior when I try to match a mpeg2 video with the menu size image,
    menu size is 1920 x 1080 (photoshop file)
    mpeg2 video 1920 x 1080 (1second 19 frames)
    the idea is to go from the menu link to the next sub menu with a video as transition, using the same image on the video as the menu and then zooming in (in my case through a door) to end up after the zoom in the next level menu.
    I try to achieve a smooth change from the first play menu picture to the video image into the next level menu picture,
    everything works good but when I watch it on the preview mode on the left and right side of the video it shows a black bar at least 15 to 25 pixel wide, that means the video image appears smaller and it causes a little jump what is preety disturbing and can not be sold as a professional work.
    why encore treats the video size and picture differently?
    it's gratful appreciated if somebody who got experience in a transition I mentioned obove posting any solution,
    thankl you all

    Hi all
    I'm having a very similar problem with Encore. My menu items are distorting (a minor but infuriating squashing top and bottom) when previewed.
    Using Encore,PS,AE CS4
    DVD format SD PAL DV widescreen
    I created 3 menu frameworks and 3 video transistions to link them in AE. On the final frame of each transistion in AE I saved the frame with Composition>Save Frame to> Photoshop Layers. In PS i added the button functionality and saved.
    In Encore I use Dynamic link to import AE transistions as timelines and imported each PS menu twice, once as "menu" and once as an asset.
    When I link the timeline transistions to the menu and preview at the point the menu begins the whole image is squashed. When the next transistion is activated the image returns to its original size.
    Thinking it was the use of PS that was causing the menus to distort I used the menu asset directly in the time line. Obviously no menu functionality but also no distortion. The AE transistion flowed straight into the "menu" just as I expected.
    In the properties panel the menu Aspect Ratio 16:9
    The AE transistions PAR is SD PALwidescreen 1.4587.
    I did try the Blu Ray suggestion above but the same distortion was apparent.
    Any suggestions short of squashing the video to match the menu would be welcomed.
    Thanks

  • White screen flash when shutting down after a suspend

    If I have suspended my laptop at any time during its uptime, when shutting down the screen flashes white, but it turns off as usual. This only happens if I have suspened.
    There are no issues as far as I can tell, I see nothing much in journalctl when comparing a suspeded shutdown vs no suspend.
    Im using nouveau, and I'm up-to-date as of now.
    Google hasnt returned much,
    Anyone else seeing this?

    Create a new account, name it "test" and see how your apps work in that User acct? (That will tell if your problem is systemwide or limited to your User acct.) This account is just for test, do nothing further with it.
    Open System Preferences >> Accounts >> "+" make it an admin account.
    If the problem is present in the test account also, then it is systemwide. In this case try repairing this with the 10.5.2 Combo Update This is a fuller install, as opposed to an incremental "delta" update so it should overwrite any files that are damaged or missing. It does not matter if you have applied it before.
    Remember to Verify Disk before update and repair permissions after update from /Applications/Utilities/Disk Utility.
    If the problem does not appear in the test account try starting in "Safe Mode" (It will take a bit more time to startup because it runs a directory check first).
    If that works go to System Preferences >> Accounts >> Login Items and remove them. Boot normally and test. If there are still problems, go to ~(yourHome)/Library/Contextual Menu Items and move whatever is there to the desktop. Then do the same with /Library/Contextual Menu Items. Lastly, try moving /Users/Home)/Library/Fonts to your desktop and restarting.
    Log out/in or restart, if that sorts it start putting items back one at a time until you find the culprit.
    Let us know.
    -mj

  • Firefox exe application error the instruction at 0x60177757 referenced memory at "0x00000004" the memory could not be read- happens when shutting down the system

    This happens every time when shutting down the system?

    Sometimes a problem with Firefox may be a result of malware installed on your computer, that you may not be aware of.
    You can try these free programs to scan for malware, which work with your existing antivirus software:
    * [http://www.microsoft.com/security/scanner/default.aspx Microsoft Safety Scanner]
    * [http://www.malwarebytes.org/products/malwarebytes_free/ MalwareBytes' Anti-Malware]
    * [http://support.kaspersky.com/faq/?qid=208283363 TDSSKiller - AntiRootkit Utility]
    * [http://www.surfright.nl/en/hitmanpro/ Hitman Pro]
    * [http://www.eset.com/us/online-scanner/ ESET Online Scanner]
    [http://windows.microsoft.com/MSE Microsoft Security Essentials] is a good permanent antivirus for Windows 7/Vista/XP if you don't already have one.
    Further information can be found in the [[Troubleshoot Firefox issues caused by malware]] article.
    Did this fix your problems? Please report back to us!

  • MacMini Hangs When Shutting Down

    Hi all.
    I've tried looking up the answers to this but I have a slightly different issue from others who had issues when shutting down.
    This started a few months ago.  What happens is when I click to shut down the computer, everything starts closing out.  The top menu bar disappears but then nothing else happens.  I'm basically looking at my wallpaper with nothing on it but my dock will still be up.  When I look on my dock the only thing that appears to be active is the "Finder" folder.  When I click on it nothing happens, however, if I right click it says that the application is not responding and gives me the option to relaunch, but nothing happens.  So it seems like there's something going on with the "Finder" folder that is preventing it from shutting down.
    For what it's worth, I did run "Verify Disk" from Disk Utilities that said everything came back okay.  I unplugged any external devices hooked up via USB like my USB hub to see if there was something going on there.
    I have a 2012 Mac Mini.
    In the past, I have let it go all night to see if it would eventually shut down and it won't.  I have to force shut it down.  Ideally, I don't want to do this.  Has anyone else had this issue?
    Thanks!

    These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad and start typing the name.
    Step 1
    For this step, the title of the Console window should be All Messages. If it isn't, select
              SYSTEM LOG QUERIES ▹ All Messages
    from the log list on the left. If you don't see that list, select
              View ▹ Show Log List
    from the menu bar at the top of the screen.
    In the top right corner of the Console window, there's a search box labeled Filter. Initially the words "String Matching" are shown in that box. Enter "BOOT_TIME" (without the quotes.)
    Each message in the log begins with the date and time when it was entered. Select the BOOT_TIME log message that corresponds to the last boot time when you had the problem. Now clear the search box to reveal all messages. Select the ones logged before the boot, during the time something abnormal was happening. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
    For example, if the system was unresponsive or was failing to shut down for three minutes before you forced a restart, post the messages timestamped within three minutes before the boot time, not after. Please include the BOOT_TIME message at the end of the log extract—not at the beginning.
    If there are long runs of repeated messages, please post only one example of each. Don’t post many repetitions of the same message.
    When posting a log extract, be selective. A few dozen lines are almost always more than enough.
    Some private information, such as your name, may appear in the log. Anonymize before posting.
    Please don't indiscriminately dump thousands of lines from the log into this discussion.
    Please don't post screenshots of log messages—post the text.
    Step 2
    In the Console window, select
              DIAGNOSTIC AND USAGE INFORMATION ▹ System Diagnostic Reports
    (not Diagnostic and Usage Messages) from the log list on the left. If you don't see that list, select
              View ▹ Show Log List
    from the menu bar.
    There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points down. You'll see a list of reports. A crash report has a name that begins with the name of the crashed process and ends in ".crash". A panic report has a name that begins with "Kernel" and ends in ".panic". A shutdown stall report has a name that ends in ".shutdownstall". Select the most recent of each, if any. The contents of the report will appear on the right. Use copy and paste to post the entire contents—the text, not a screenshot. It's possible that none of these reports exists.
    I know the report is long, maybe several hundred lines. Please post all of it anyway.
    If you don't see any reports listed, but you know there was a crash or panic, you may have chosen Diagnostic and Usage Messages from the log list. Choose DIAGNOSTIC AND USAGE INFORMATION instead.
    In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.)
    Please don’t post other kinds of diagnostic report—they're very long and rarely helpful.

  • Running Widows Vista system, every time I try to copy and paste from Firefox DEP shuts down Word Works

    I am using a HP desk top with Windows Vista. When ever I try to copy and paste from Mozilla Firefox, the DEP system shuts down
    Microsoft Works Word Processor. I have tried turning off DEP for Works but it still shuts down the Program.

    This is might because of your prior change in softwares. so first you have to do run '''sfc''' in run command. and then you see the specific problem which causes this . Since System File Checker (sfc) scan will make Windows replace corrupt or missing system files on your computer.
    * Click Start>All Programs>Accessories>right-click Command Prompt, and select Run as Administrator.
    * Click Continue or supply Administrator credentials if prompted.
    * In the Command Prompt window type the following, and press Enter:
    sfc /scannow
    Refer this KB article for more information:
    http://support.microsoft.com/kb/929833
    See this is not a problem of firefox till now. You can check more with microsoft answers site.

  • Kernal panic when shutting down

    I've had 3 kernal panics in the past week when shutting down my macbook pro. Its a mid 2012 macbook pro with mountain lion. Here is the report log [which is the same for all 3 panics]
    panic(cpu 1 caller 0xffffff802ceb7b95): Kernel trap at 0xffffff802ce46084, type 13=general protection, registers:
    CR0: 0x0000000080010033, CR2: 0x00007fff7e8ecfc8, CR3: 0x000000000bade032, CR4: 0x00000000001606e0
    RAX: 0xdeadbeefdeadbeef, RBX: 0xffffff7fae9ee148, RCX: 0xffffff80407c10b0, RDX: 0x0000000000000000
    RSP: 0xffffff811cff2940, RBP: 0xffffff811cff2940, RSI: 0xffffff7fae9ee360, RDI: 0xffffff803f4bc550
    R8:  0xffffff803f9d9ba0, R9:  0x0000000000000000, R10: 0xffffff80407c10b0, R11: 0xffffff811cff39d8
    R12: 0x0000000000000001, R13: 0xffffff803f9d9ba0, R14: 0xffffff803f9d9ba0, R15: 0xffffff80407c10b0
    RFL: 0x0000000000010282, RIP: 0xffffff802ce46084, CS:  0x0000000000000008, SS:  0x0000000000000010
    Fault CR2: 0x00007fff7e8ecfc8, Error code: 0x0000000000000000, Fault CPU: 0x1
    Backtrace (CPU 1), Frame : Return Address
    0xffffff811cff25e0 : 0xffffff802ce1d5f6
    0xffffff811cff2650 : 0xffffff802ceb7b95
    0xffffff811cff2820 : 0xffffff802cece4ad
    0xffffff811cff2840 : 0xffffff802ce46084
    0xffffff811cff2940 : 0xffffff802cf0f9a6
    0xffffff811cff2950 : 0xffffff7fae9ed011
    0xffffff811cff29b0 : 0xffffff7fae9ec46b
    0xffffff811cff3a30 : 0xffffff802d140db1
    0xffffff811cff3a90 : 0xffffff802cef5666
    0xffffff811cff3ae0 : 0xffffff802cf09311
    0xffffff811cff3b90 : 0xffffff802cefbb09
    0xffffff811cff3c40 : 0xffffff802cefc3e2
    0xffffff811cff3f50 : 0xffffff802d1e17da
    0xffffff811cff3fb0 : 0xffffff802cececf3
          Kernel Extensions in backtrace:
             com.avast.AvastFileShield(1.0.1)[573200C9-0B31-8BA4-099E-1DDEFCDE4C88]@0xffffff 7fae9eb000->0xffffff7fae9f0fff
    BSD process name corresponding to current thread: launchd
    Mac OS version:
    12A269
    Kernel version:
    Darwin Kernel Version 12.0.0: Sun Jun 24 23:00:16 PDT 2012; root:xnu-2050.7.9~1/RELEASE_X86_64
    Kernel UUID: 8D5F8EF3-9D12-384B-8070-EF2A49C45D24
    Kernel slide:     0x000000002cc00000
    Kernel text base: 0xffffff802ce00000
    System model name: MacBookPro9,2 (Mac-6F01561E16C75D06)
    System uptime in nanoseconds: 43895918140405
    last loaded kext at 21278221950502: com.apple.filesystems.msdosfs          1.8 (addr 0xffffff7faea23000, size 65536)
    last unloaded kext at 21874079173392: com.apple.iokit.IOUSBMassStorageClass          3.5.0 (addr 0xffffff7fae9fa000, size 69632)
    loaded kexts:
    com.avast.PacketForwarder          1.3
    com.avast.AvastFileShield          1.0.1
    com.apple.driver.AudioAUUC          1.60
    com.apple.iokit.IOBluetoothSerialManager          4.0.9f8
    com.apple.driver.X86PlatformShim          1.0.0
    com.apple.driver.AGPM          100.12.69
    com.apple.driver.AppleMikeyHIDDriver          122
    com.apple.driver.AppleHDA          2.3.0f2
    com.apple.filesystems.autofs          3.0
    com.apple.driver.AppleMikeyDriver          2.3.0f2
    com.apple.driver.AppleUpstreamUserClient          3.5.10
    com.apple.driver.AppleBacklight          170.2.3
    com.apple.driver.AppleMCCSControl          1.0.33
    com.apple.driver.AppleIntelHD4000Graphics          8.0.0
    com.apple.driver.AppleSMCPDRC          1.0.0
    com.apple.driver.AppleLPC          1.6.0
    com.apple.iokit.BroadcomBluetoothHCIControllerUSBTransport          4.0.9f8
    com.apple.driver.AppleSMCLMU          2.0.2d0
    com.apple.iokit.IOUserEthernet          1.0.0d1
    com.apple.Dont_Steal_Mac_OS_X          7.0.0
    com.apple.driver.ApplePolicyControl          3.2.6
    com.apple.driver.AppleIntelFramebufferCapri          8.0.0
    com.apple.driver.SMCMotionSensor          3.0.2d6
    com.apple.driver.AppleUSBTCButtons          235.4
    com.apple.driver.AppleUSBTCKeyboard          235.4
    com.apple.driver.AppleIRController          320.15
    com.apple.AppleFSCompression.AppleFSCompressionTypeDataless          1.0.0d1
    com.apple.AppleFSCompression.AppleFSCompressionTypeZlib          1.0.0d1
    com.apple.BootCache          34
    com.apple.iokit.SCSITaskUserClient          3.5.1
    com.apple.driver.XsanFilter          404
    com.apple.iokit.IOAHCIBlockStorage          2.2.0
    com.apple.driver.AppleFWOHCI          4.9.5
    com.apple.driver.AppleUSBHub          5.1.6
    com.apple.iokit.AppleBCM5701Ethernet          3.2.5b3
    com.apple.driver.AirPort.Brcm4331          600.15.20
    com.apple.driver.AppleSDXC          1.2.2
    com.apple.driver.AppleAHCIPort          2.4.0
    com.apple.driver.AppleUSBEHCI          5.1.5
    com.apple.driver.AppleUSBXHCI          1.1.0
    com.apple.driver.AppleEFINVRAM          1.6.1
    com.apple.driver.AppleSmartBatteryManager          161.0.0
    com.apple.driver.AppleACPIButtons          1.6
    com.apple.driver.AppleRTC          1.5
    com.apple.driver.AppleHPET          1.7
    com.apple.driver.AppleSMBIOS          1.9
    com.apple.driver.AppleACPIEC          1.6
    com.apple.driver.AppleAPIC          1.6
    com.apple.driver.AppleIntelCPUPowerManagementClient          196.0.0
    com.apple.nke.applicationfirewall          4.0.39
    com.apple.security.quarantine          2
    com.apple.driver.AppleIntelCPUPowerManagement          196.0.0
    com.apple.iokit.IOSerialFamily          10.0.6
    com.apple.driver.DspFuncLib          2.3.0f2
    com.apple.iokit.IOAudioFamily          1.8.9fc9
    com.apple.kext.OSvKernDSPLib          1.6
    com.apple.kext.triggers          1.0
    com.apple.driver.X86PlatformPlugin          1.0.0
    com.apple.driver.AppleHDAController          2.3.0f2
    com.apple.iokit.IOHDAFamily          2.3.0f2
    com.apple.driver.AppleSMBusController          1.0.10d0
    com.apple.driver.AppleSMBusPCI          1.0.10d0
    com.apple.driver.IOPlatformPluginFamily          5.2.0d16
    com.apple.driver.AppleBacklightExpert          1.0.4
    com.apple.iokit.AppleBluetoothHCIControllerUSBTransport          4.0.9f8
    com.apple.iokit.IOFireWireIP          2.2.5
    com.apple.iokit.IOSurface          86.0.2
    com.apple.iokit.IOBluetoothFamily          4.0.9f8
    com.apple.driver.AppleGraphicsControl          3.2.6
    com.apple.iokit.IONDRVSupport          2.3.4
    com.apple.iokit.IOGraphicsFamily          2.3.4
    com.apple.driver.AppleSMC          3.1.3d11
    com.apple.driver.AppleUSBMultitouch          235.7
    com.apple.iokit.IOUSBHIDDriver          5.0.0
    com.apple.driver.AppleThunderboltDPInAdapter          1.8.5
    com.apple.driver.AppleThunderboltDPAdapterFamily          1.8.5
    com.apple.driver.AppleThunderboltPCIDownAdapter          1.2.5
    com.apple.driver.AppleUSBMergeNub          5.1.5
    com.apple.driver.AppleUSBComposite          5.0.0
    com.apple.iokit.IOSCSIMultimediaCommandsDevice          3.5.1
    com.apple.iokit.IOBDStorageFamily          1.7
    com.apple.iokit.IODVDStorageFamily          1.7.1
    com.apple.iokit.IOCDStorageFamily          1.7.1
    com.apple.iokit.IOAHCISerialATAPI          2.5.0
    com.apple.iokit.IOSCSIArchitectureModelFamily          3.5.1
    com.apple.iokit.IOFireWireFamily          4.5.5
    com.apple.driver.AppleThunderboltNHI          1.6.0
    com.apple.iokit.IOThunderboltFamily          2.0.3
    com.apple.iokit.IOEthernetAVBController          1.0.2b1
    com.apple.iokit.IO80211Family          500.15
    com.apple.iokit.IONetworkingFamily          3.0
    com.apple.iokit.IOUSBUserClient          5.0.0
    com.apple.iokit.IOAHCIFamily          2.2.0
    com.apple.iokit.IOUSBFamily          5.1.6
    com.apple.driver.AppleEFIRuntime          1.6.1
    com.apple.iokit.IOHIDFamily          1.8.0
    com.apple.iokit.IOSMBusFamily          1.1
    com.apple.security.sandbox          220
    com.apple.kext.AppleMatch          1.0.0d1
    com.apple.security.TMSafetyNet          7
    com.apple.driver.DiskImages          344
    com.apple.iokit.IOStorageFamily          1.8
    com.apple.driver.AppleKeyStore          28.18
    com.apple.driver.AppleACPIPlatform          1.6
    com.apple.iokit.IOPCIFamily          2.7
    com.apple.iokit.IOACPIFamily          1.4
    com.apple.kec.corecrypto          1.0

    Note that, though Linc is certainly correct about Avast, and about many other anti-virus programs, his is an extreme sentiment that, like most extreme sentiments, is not entirely accurate.  Some Mac anti-virus software is quite well behaved, such as ClamXav and Sophos.  Whether you need it or not is not for someone else to tell you.  You should let your personal tastes, behaviors and requirements dictate whether you use anti-virus software, within the framework of an educated protection plan.  See my Mac Malware Guide for more information that can help you figure all that out.

  • Beeps when Shutting down

    Hi,
    Can somebody help me with this questions:
    Problem no 1. (But I don´t know if it´s a problem.) Is there enybody who have a sound of short beeps when shutting down the computer.
    Problem no 2. Small (white light) flickering lines across the screen when the harddisk is working
    I have following system:
    K7N2G-L
    Athlon XP 1900+
    Kingston ValueRam 2 * 256 mb (slot1 and slot 3)
    PSU 350W (qtec)
    bios versin 3.4
    Nforce drivers 2.41
    FSB ratio Dram 1:1
    Hopefully
    carljo

    carljo,
    Three things.
    First, Kingston ValueRam is hit or miss with nForce. That could be your problem.
    Second, your Power Supply could be the problem if it is not giving out enough juice.
    Third, are the beeps more like a siren as if it is warning you your CPU is too hot and the comp shuts down.
    Take Care,
    Richard

  • REP-0178 When Shutting Down a Single Report Server

    Reports 9.0.4.2 Dev Suite
    Win XP
    I constanly receive a REP-0178 when shutting down my Report Server. I have read other posts that indicate this happens on systems with multiple Report Servers running. I have only a single Rep Server in use.
    Any ideas?

    this might indicate that there is something wrong with your OSAGENT process. usually that happens with mutliple servers, but since all those servers bind to the same OSAGENT, shutting down the first server will shut down the OSAGENT and all subsequent shutdowns will fail
    are you sure you are not runnig an in-process server (set up by default) that you are not aware of. check the rwservlet.properties and see if IN_PROCESS is set to YES or NO.
    thanks,
    ph.

  • Pinch zoom-in/out only works once in Safai

    Outside of Safari, the pinch gesture works normally. In Preview it will zoom in or out as deep as I need. But when I try and use the gesture in Safari, it will only work once until I 'CMD' + '0' or click "Actual Size" in the View tab. It doesn't zoom on a gradient either. Pinch-open is the equivalent of 'CMD' + '+' and pinch-close is the the equivalent of 'CMD' + '-'. After I make the gesture once, I can pinch all I want and nothing happens. I need to revert the page to its original size for the gesture to work again (still only once).
    I have an i7 Macbook Pro running 10.6.8. Can anybody help me out?

    Sorry, I didnt do a good enough job explaining my issue/bug above. I can't attach a screen shot becuase of where I work and what this content is so I will do the best I can explaining it in text.
    I have a row of buttons created in InDesign that have no effects, no rollovers and lets just call them Apple In, Apple Out, Orange In, Orange Out, Banana In, Banana Out, etc.
    The Apple In button invokes an animation called Apple Fade In. Apple Out simply fades out the content animation. All of the other buttons function the same way. In my exported .swf I can click Apple In and I get my content as expected, I click Apple Out and away it goes. All other buttons work the same way, as expected. If I go through all my fruit and now I want to go back and display the Apples again. I click Apple In and NOTHING happens! If I click Apple Out the fade out animation works just fine, as many times as I want to click it, I get a flash of the content and it fades right out. The "In" buttons no longer work for any of the fruit after the initial "In" animation plays.
    In the Animation Panel I have the animations set to Play Once and Dont Hide. In the Layers Panel I have a layer called Apple Fade. In that Layer Group/Set I have Apple Fade Hack which consists of a native ID square no stroke and no fill grouped with my Apple content on "the stage." Also in that Layer Group/ Set is a collection of bitmap images, text, and vectors called Apple. I created the content first on a layer Apple, when I created the group with the blank square ID bumped the original content group under the parent layer and added another sub-layer called Apple Fade Hack. These two are indented and under the top level Apple Layer. I could probably get away with attaching a screen shot of the timing, layer, and animation panels if I had to.
    Thanks

  • MacBook pro won't shut down only after sync with iTunes?

    MacBook pro stays on blue screen with spinning gear when I try to shut down only if I have synced either an iPhone or iPad with iTunes. If i have not synced with iTunes the shut is ok.
    Any suggestions would be great :)

    I had the same problem and just fixed it.
    What I did:
    - Launch Disk Utility > Select Macintosh HD > Verify Disk
    Let the Verify run until it's done
    - If you are seeing any error try the Repair disk
    It's possible you need to restart (holding cmd+r while restarting)
    - Next I did a verify disk permissions and a repair disk permissions
    - reboot
    After this the shutdown issue was gone!
    Hope this solves your problem as well.

  • After installing Mavericks my MacBook Pro and my MacMini can't shut down, only a grey screen and finish. Must be killed by the power button. Why?

    After installing Mavericks my MacBook Pro and my MacMini can't shut down, only a grey screen and finish. Must be killed by the power button. Why?
    Nach der Installation von Mavericks kann ich weder das MacBook Pro (2 x 2.4 GHz) noch den MacMini (2 x 2.66 GHz) herunterfahren. Es bleibt ein dauerhafter grauer Bildschirm. Nach 20 min habe ich einen erzwungenen Neustart durchgeführt.
    Ausserdem startet die Macs wesentlich langsamer als mit OS X 10.6.8.

    same here...  sometimes it works, most of the time it doesn't!!

Maybe you are looking for