Strange behaviour with 'Wait' activities using BPEL 10.1.3

Hi All,
We have just migrated from BPEL 10.1.2 to BPEL 10.1.3 and now we have a weird problem with the Wait activity.
We have a process with several wait activities; end the problem is that the last wait activity is hanging (it should wait for 5 seconds, but it never ends waiting).
After removing the last wait, this problem arises at the previous wait activity.
Therefore I made a seperate BPEL process with only some wait activities with several forms (using hardcoded waittime and using waittime from variables, but those wait times were working correctly).
Note: I have programmed a lot of processes already within BPEL, so it is NOT a beginners fault.
Does someone have an idea what is happening here.

Fixed.
Quote from a response to a ticket.
You may not have enough timer expirationAgent threads...
Try the following...
1. Stop your application server
2 Take a backup copy of the following file:
<Oracle_Home>\bpel\domains\<domain-name>\config\resources-quartz.properties
3 Edit the original resources-quartz.properties
It contains the following property : com.oracle.bpel.expirationAgent.threadCount
It's value is set to 10 by default.
Increase the value, for example: 200.
4 Restart the application server

Similar Messages

Strange behaviour with Safari.

Very strange behaviour with Safari this morning. Pages loading piecemeal or partially. The content only becomes viewable after the cursor has passed over the area. Have cleared caches and reported it but I'm wondering if this is a local matter here in the UK. Anyone suffering similar problems? Firefox is responding perfectly normally.

I see a reply has come back via a previous post. As I am trying to get a response to this one I shan't reply there but I should point out that for me, this is an isolated problem. I do use open DNS but with no track history of problems there , I can't blame that.
In the last few minutes normality has returned.

Strange behaviour with Subjective Assessments comments in SSM10 SP10

Good day community,
We have strange behaviour with Subjective Assessments comments in SSM10 SP10.
We have been using this successfully for 3 quarters.
The scenario is as follows.
Business users capture Subjective Assessment comments successfully and these can be viewed on the scorecard overview for Q3. This can be printed to PDF successfully as well.
A few hours later, when the user accesses the Scorecard Overview, the Q3(March 2014) comments are now replaced with the
Q2(Dec 2013) comments.
This has not happened previously. We have recently deployed Internet Explorer (IE) 10 to some of the machines that previously used IE9 or IE8. Could this be a contributing factor?
This has happened with one database on 2 contexts. Although the database/scorecard in question has been created on SSM10, we have recently upgraded the rest of the organisation onto SSM10 from SSM7.5 but those are completely separate databases.
We have not found a pattern yet, but there is only one assigned administrator for this database and she often has 'funny' things happen on her machine. Could it be possible that there's a virus on her machine? Or maybe there's a sequence or combination of steps that she's doing that could cause this? We have not been able to recreate the situation in our developer offices.
Any ideas on this strange behaviour would be appreciated.
Regards,
Natasha

Hi everyone,
We have since noticed that if you go into the Administrator > Context Management > and change the "Person Responsible" and then save, once you go back to the Scorecard Overview all the Q3 comments have been overwritten with the Q2 comments.
This happened on a different machine so it seems there could be a bug in the Administrator.
Any thoughts on this strange behaviour would be appreciated.
Regards,

Strange behaviour with nested overflow headers

Hi there,
I have a strange behaviour with nested overflow headers. I have a hierarchy with some dynamic tables an several headers for the hierarchy steps. When the table entries lead to an page overflow, I would assume, that all parent headers will be shown. But unfortunatley only the last (the deepest in the hierarchy) defined overflow header will be shown. Here you can see a quick example of it. (http://www.nemonon.de/HeaderProblem.xdp)
Any help would be very welcome.
Thanks and greetings,
Joerg

That will sure work for some requirements and thanks for the ideas. But this would fail for the second table. Perhaps my example xdp only shows the behaviour of the nested overflow headers and it´s structure is reduced to show that. The real situation is a bit different. The parent containers also contain some other content. The Problem is not the table...I've just chosen it to produce some content and another nested header. Just try to uncheck the overflow header of the table. This will lead to, that the next defined header (in this case "HeaderThree" is shown. When you go on by also disabling that header, the next one will be shown...and so on. This shows, that the headers for their own are functional, but they fail in combination.
Greetings,
Joerg

View Master mode strange behaviour with jpg files

Hy all,
I'm using Aperture, and I'm tweakin a lot the SW to discover all secrets ....
I'm really concerned about a strange behaviour of the SW in view mode.
If I open a jpg file, do not apply ANY modification, and apply the "show master" command (pressing M), there's a subtle behaviour :
*the images get sharper !!!!*
It behaves as if an "edge sharpening" was applied !!!!!!
With _RAW files this thing doesn't happen at all._
Even stranger, if I zoom to full definition (by pressing Z), and toggle between normal view and "show master" view, the immage remains the same !
The effect is not so evident with all images, but sometimes it is !!
Anyway, I expect not to have such kind of things with a professional SW.
With professional cameras and good quality files it's really annoying not to beeing sure what's the REAL content of the jpg image.
Has anyone noted this thing ? Is there a reasonable explanation ?
The only one I tried to figure out is the following : may be Aperture applies some kind of resampling algorithm with jpg files (bicubic, bilinear, etc).
May be this resampling is not applied with 100% magnification, as weel as with raw files.
But it's only my guessing. Now, I'm tweaking other viewers and other SW to understand what's the real jpg image stored in the file : the blurer one form normal view or the sharper one with "show master" mode.
I stress once again : of course, the jpg file I'm talking about have no settings at all, just imported and toggled with M button.
Thanks in advance.
Regards,
Enzo

Hy,
I'm afraid I'm not been clear.
The problem is this :
1) jpg image opened in normal view mode, no zoom, (no quick preview, of course) : image with a certain amount of blour
2) jpg image opened in show master mode, no zoom, (no quick previre, of course) : image SHARPER with respect with the previous.
No edit applied from import, so "show master" command shouln't apply any change in rendering, should it ?
The only thing I said on 100% view is that such difference (between normal mode e show mastermode) is not present with 100% magnification.
That was the issue.
Enzo

IPhoto: strange behaviour with preview thumbnails

Is there a simple way in iPhoto 8 to rebuild the thumbnail database?
I recently noticed a strange behaviour iPhoto 8 has with previews: In some of my event categories, iPhoto does not display the correct preview thumbnail of the picture, but a preview thumbnail of another event. When I click on the thumbnail, it reloads the appropriate preview and it does not happen again - with that picture. Also, if I double click an event to open it, the small thumbnail of the event's key photo that is to be displayed in the title bar (next to the All Events button) is not always correct.
Thank you for your help!
Stefan

I have similar problems (lately) with iPhoto 6.0.6 -- thumbnails do not equal the images they 'thumbnail' of.
Sometimes when it opens, it (recently) asked me to rebuild the thumbnails, but not always.
Can I force a thumbnail rebuild using the command you gave - Apple-option while opening iPhoto? In iPhoto 6.0.6 this primarily forces a new selection of a library.

Strange behaviour with Slideshow placement since upgrade to 3.2 from 3.1

Hello, since I upgrade from 3.1 to 3.2, I have some strange behaviours but in particular with the placement of a slideshow on a new page. It is not displaying in the same position as I have in in Design. It is way off and going up over my menus when I look at it in Safari or Chrome. Does anyone know how to fix this or could it be a bug?

Ben,
When you upgrade, only apex_030200 will be created and that will use the tablespace you specify. It does not have to be the same one used by flows_030100.
Scott

KYF exhibits strange behaviour with decimals

Hi everybody,
a DEC-key figure (IOBJ maintenance: additional properties->BEx->decimal places: Nothing Defined) exhibits strange behaviour regarding the treatment of decimals.
When looking at the data in the cube (InfoCube maintenance->content) the value is 2,086.
In the query the result is 2.0900000000 (%).
Now comes the problem: in BPS (in the buffer) the value is 2,08. The system simply truncates the figure! This is the value which is also used in the FOX and produces the wrong result.
I need the system to sensibly round the values correctly to 2 decimals OR work with an additional decimal place. How can this be done?
Thanks for any input,
Martin

Hi,
In the manual planning, while designing the layout, there is a setting in data columns tab called decimals. You have to insert 2 under this. Then in the layout data will be displayed with 2 decimal places.
Hope this helps.
Regards,
Isha

Strange behaviour with firefox

In all my flash movies I've a strange behaviour that happens
only whit Mozilla Firefox.
When I go over a clickable area it just doesn't work and it's
located lower than expected,
with Internet explorer and opera I don't have this problem.
The clickable areas are movieclips with on(release) script
set.
thanks

Are you using a percentage size of the flash object? E.g.
height=100%?
This is known to cause problems. You could omit those by
setting the height of the <body> tag to 100%, too (weird, I
know). Or delete the very first line in the html document, the one
that sets the doctype

Strange behaviour with combo boxes.

Has anyone else noticed strange behaviour of combo boxes with applets?
What happens is that on selecting the combo drop down, the dialogue the combo is sitting on moves behind its parent window. You just end up seeing the combo list, and no dialogue. Select a combo item, and sometimes the dialogue reappears, and sometimes it is still hidden.
I've only seen this whilst running an applet in browsers. In Eclipse I don't see the behaviour.
The behaviour is also very intermittent.
I'm using Java Plug-in 1.6.0_10-rc2, Using JRE version 1.6.0_10-rc2 Java HotSpot(TM) Client VM, on Windows Vista, Google Chrome browser.
I'd raise it as a bug, it certainly seems quite serious, but I don't have a reliable test case.
I have a work around, on all my dialogues with combo's on them, I have setAlwaysOnTop(true). Not really the correct behaviour though.

GeoffTitmuss wrote:
No, I believe I am just using Swing components.Ok, then I'm out of ideas

Strange behaviour with HTTP RFC Connection

Hi Experts,
today I investigated a strange behaviour in our SAP environment. I tried to create a HTTP RFC connection (SM59) from our integration server to a locale integration engine in our test environment.
http:<server>:<port>/sap/xi/engine?type=entry
A few days ago I do the same for the development environment and all works fine.
For test purposes I used my user for the connection but when I tried to test the connection (test button) the authentification fails. After a few attempts my user was locked on the target server. (I called a admin to unlock my user).
My first idea was that there is problem with the URL or something in this way. So I do a test within the browser and type in my user again. The result was - as aspect - a soap message that an empty message can not be processed.
My second idea was that there are troubles with the authorization so I used a system user for the connection. I test the connection and received a message that the user has not enough rights to send messages to the locale integration server.
So I came to the result that I mistyped my password due the first attempt. I try again and I was really very carefully by typing my password. I press the test button and it fails with the message that I could not logged on to the system. I try it many times and it always fails.
Finally I use the system user and attach the required roles to the user.
But has anybody an idea why it was not possible to use my user? I really don't understand it since it works fine in the development environment.
Björn

what is the version of SAP system in dev and test environments.......
Some older version SAP systems(4.6 version) require passwords in CAPITALs....
Edited by: Praveen Gujjeti on Mar 17, 2009 5:05 PM

Strange behaviour with smart music list in iTunes

I don't know how is the name of this list in english. In portuguese iTunes calls "Lista Inteligente". So, I eddited a list to show all musics never played up to 100 months ago. If I click on a music in this list, before it plays, the music disappear from the list as it would be played and nothing will be played. And so one, the next and etc. No date is shown in "last play" but the music isn't anymore to see in this List.
This list works well for many years but suddenly I have this strange behaviour.
could it be something wrong with new update? Now I have iTunes installed 11.3.0.54

Click the gray disclosure triangle in front of the iPod touch name.
Thus I cannot do any functions with the music on my iPod - such as delete songs, update song info, etc.
I would suggest making any changes to songs in iTunes and then transferring the songs to the touch.
You can create playlists and autosync on lythos playlists.
Then add/delete from those playlists, update items in iTunes then plug in the touch to sync it.

Strange problem with SSL Sockets using more than 10 Clients

Hi
I�m using Jsse ( JDK 1.4.2_06 ). I have coded a Client/Server Applikation acting over SSLSockets or over unsecured Sockets. If I use unsecured Sockets everthing works fine, but if I use SSLSockets for the Connection and about 20 Clients, the Clients often can�t connect to the Server and the following Exception was thrown:
java.net.ConnectException: Connection refused: connect
Could it be that there is some strange problem with SSLServerSockets relating to this phenomenon?
If I use only a few Clients the Exception occurs never or only sometimes.
Has anyboby an idea what is happaning there?
Regards Chrisli

Hi
From the description of your scenario, you have coded your own server side of the application. I would advise that you consider moving your application to run under Tomcat framework and test if you still get the same exception.

FF 4 (mac) doesn't display handcursor in all Flash websites. Also all html websites show strange behaviour with cursor. (blinking cursor in nearby div after clicking a button)

I'm running Mac OS 10.6
FF4 doesn't display the hand cursor or type cursor in '''all''' flash websites on links/textfieldss when it should. Highly annoying and disgracing all flashcontent.
Also with html websites I experienced strange cursor behaviour with FF4. Although it's hard to reproduce the problem. It's very inconsistent.
I have the feeling in general FF4 should look into it's cursor behaviour on all possible platforms. Mainly Flash.

I replicated the typing cursor problem on the popular FB. Just click e.g. "x people like this", you'll see you get a blinking type cursor in the "close" button.

Strange behaviour with shorthand null check

Today I had a strange occurance of a NPE with that code:
SomeType type = (person.getType() != null ? TYPE1 : _ TYPE_2);
When person is not null but person.getType() returns null, I always faced a NullPointerException. Changing the code to
SomeType type = (person.getType() == null ? TYPE2 : _ TYPE_1);
solved the problem and worked. I'd like to know if anyone here can explain this strange behaviour.
Regards
PantheraOnca
Edited by: user4174452 on 05.07.2012 22:22

Of course, your right. Wrote the original code in the office and just wanted to explain the "obscurity" by pseudo code.
The original would not have been more explanatory, I think.....
(TYPE_1 and TYPE_2 were originally enums and SomeType a suitable class)
The point is that the check threw a NPE in the first case and worked in the second. You might reproduce this with arbitrary code. Will provide the Java-Version tomorrow....

Strange behaviour with 'Wait' activities using BPEL 10.1.3

Similar Messages

Maybe you are looking for