Strange bug when sending messages in parallel with same sender component

We have one sender business system sending messages to two different interfaces in parallel using an asynchronous soap channel : Interface1 and Interface2.  In this scenario the Interface1 messages appear to be conflicting in some way with the Interface2 messages.  A certain percentage of the Interface1 messages incorrectly receive a receiver system which equals the receiver configured for Interface2.  This causes the Interface1 messages to fail since there is no defined mapping our routing channel to the Interface2 receiver system for that interface.
We have confirmed that this bug only exists when the same sender business system is used.  We ran a test using different sender systems and all the messages went through successfully.  Today we ran a test moving both interfaces over to a different sender.  This test reproduced the issue but in a slightly different way.  This time the Interface2 messages were corrupted with the receiver from Interface1.
We also ran some load tests to see how many messages need to be sent before the symptoms occur.  We are able to reproduce the problem with as little as 15 messages for each interface.  10 messages for each interface works.
We have noticed that the messages that fail can't seem to load the sender agreement.  We think this might be where the problem might be.  I pulled the trace message below for the error cases:
<Trace level="1" type="T">Reading sender agreement</Trace>
<Trace level="1" type="T">Message does not contain a sender agreement</Trace>
<Trace level="1" type="T">Inbound validation by Integration Engine does not take place</Trace>
For the successful messages the trace looks like:
<Trace level="1" type="T">Reading sender agreement</Trace>
<Trace level="3" type="T">Validation Mode = No Validation</Trace>
Has anyone ever seen this behavior?  We have put in a ticket for the SAP support team, but I'm hoping someone here might have seen this and can tell me if there is patch.
Thanks,
Kevin

Hello,
We have one sender business system sending messages to two different interfaces in parallel using an asynchronous soap channel : Interface1 and Interface2.
You have to create two soap sender comm channels and two sender agreements. The reason for this is that interface1 is already binded using your sender agreement. Therefore, you will get an error/conflict for interface2 because it is not the interface expected by your only sender agreement.
Hope this helps,
Mark

Similar Messages

  • WDA Personalization bug when running multiple instances of the same WDA component

    I have found an issue relative to WDA personalization that it seems to be a bug for me.
    Scenario:
    In my scenario, I have a Web Dynpro component A which has two usages of the same Web Dynpro Component B (USAGE1 and USAGE2).There is a WDA application APPL_A defined to fire WDA component A. I have defined a component configuration COMP_CONF1 for WDA component B and an application configuration APP_CONF1 for WDA application APPL_A. This application configuration applies the same component configuration COMP_CONF1 to both usages USAGE1 and USAGE2.
    Runtime behaviour:
    At runtime, I execute application APPL_A using the application configuration APP_CONF1. When I personalize something in the USAGE1 of WDA component B, the effects does not appear in USAGE2 until a page refresh is done. Obviously, as both usages uses the same component configuration at rutime the effects of personalization should be applied to both, but WDA configuration framework fails to apply the changes instantaneously to USAGE2.
    Have you expermiented this behaviour? Is there any workaround for this?

    I have found an issue relative to WDA personalization that it seems to be a bug for me.
    Scenario:
    In my scenario, I have a Web Dynpro component A which has two usages of the same Web Dynpro Component B (USAGE1 and USAGE2).There is a WDA application APPL_A defined to fire WDA component A. I have defined a component configuration COMP_CONF1 for WDA component B and an application configuration APP_CONF1 for WDA application APPL_A. This application configuration applies the same component configuration COMP_CONF1 to both usages USAGE1 and USAGE2.
    Runtime behaviour:
    At runtime, I execute application APPL_A using the application configuration APP_CONF1. When I personalize something in the USAGE1 of WDA component B, the effects does not appear in USAGE2 until a page refresh is done. Obviously, as both usages uses the same component configuration at rutime the effects of personalization should be applied to both, but WDA configuration framework fails to apply the changes instantaneously to USAGE2.
    Have you expermiented this behaviour? Is there any workaround for this?

  • Suddenly cannot send messages from ipad. Can send from iPhone and they show up on messages but when sending from ipad a they say not delivered

    Suddenly cannot send messages from ipad. Can send from iPhone and they show up on messages but when sending from ipad a they say not delivered

    Using FaceTime http://support.apple.com/kb/ht4319
    Troubleshooting FaceTime http://support.apple.com/kb/TS3367
    The Complete Guide to FaceTime + iMessage: Setup, Use, and Troubleshooting
    http://tinyurl.com/a7odey8
    Troubleshooting FaceTime and iMessage activation
    http://support.apple.com/kb/TS4268
    iOS: FaceTime is 'Unable to verify email because it is in use'
    http://support.apple.com/kb/TS3510
    Using FaceTime and iMessage behind a firewall
    http://support.apple.com/kb/HT4245
    iOS: About Messages
    http://support.apple.com/kb/HT3529
    Set up iMessage
    http://www.apple.com/ca/ios/messages/
    iOS and OS X: Link your phone number and Apple ID for use with FaceTime and iMessage
    http://support.apple.com/kb/HT5538
    How to Set Up & Use iMessage on iPhone, iPad, & iPod touch with iOS
    http://osxdaily.com/2011/10/18/set-up-imessage-on-iphone-ipad-ipod-touch-with-io s-5/
    Set Up Alert Sounds
    http://www.quepublishing.com/articles/article.aspx?p=1873027&seqNum=3
    Extra FaceTime IDs
    http://tinyurl.com/k683gr4
    Troubleshooting Messages
    http://support.apple.com/kb/TS2755
    Troubleshooting iMessage Issues: Some Useful Tips You Should Try
    http://www.igeeksblog.com/troubleshooting-imessage-issues/
    Setting Up Multiple iOS Devices for iMessage and Facetime
    http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
    FaceTime and iMessage not accepting Apple ID password
    http://www.ilounge.com/index.php/articles/comments/facetime-and-imessage-not-acc epting-apple-id-password/
    Fix Can’t Sign Into FaceTime or iMessage iOS 7
    http://ipadtutr.com/fix-login-facetime-imessage-ios-7/
    FaceTime, Game Center, Messages: Troubleshooting sign in issues
    http://support.apple.com/kb/TS3970
    Unable to use FaceTime and iMessage with my apple ID
    https://discussions.apple.com/thread/4649373?tstart=90
    iOS 7 allows you to block phone numbers or e-mail addresses from contacting you via the Phone, FaceTime, or Messages
    http://howto.cnet.com/8301-11310_39-57602643-285/you-can-block-people-from-conta cting-you-on-ios-7/
    How to Block Someone on FaceTime
    http://www.ehow.com/how_10033185_block-someone-facetime.html
    My Facetime Doesn't Ring
    https://discussions.apple.com/message/19087457#19087457
    How to watch FaceTime calls on the big screen with Apple TV
    http://www.imore.com/daily-tip-ios-5-airplay-mirroring-facetime
    Send an iMessage as a Text Message Instead with a Quick Tap & Hold
    http://osxdaily.com/2012/11/18/send-imessage-as-text-message/
    To send messages to non-Apple devices, check out the TextFree app https://itunes.apple.com/us/app/text-free-textfree-sms-real/id399355755?mt=8
    How to Send SMS from iPad
    http://www.iskysoft.com/apple-ipad/send-sms-from-ipad.html
    How to Receive SMS Messages on an iPad
    http://yourbusiness.azcentral.com/receive-sms-messages-ipad-16776.html
    Apps for Texting http://appadvice.com/appguides/show/apps-for-texting
    You can check the status of the FaceTime/iMessage servers at this link.
    http://www.apple.com/support/systemstatus/
     Cheers, Tom

  • I have 2 hotmail accounts. They worked fine the first month or so, now about 20 seconds after I sign on, it goes to an send message screen but I cannot send. When I go back to inbox, it resets to the send screen again. HELP.

    I have 2 hotmail accounts. They worked fine the first month or so, now about 20 seconds after I sign on, it goes to an send message screen but I cannot send. When I go back to inbox, it resets to the send screen again. HELP.

    Here you can see how you can setup your Hotmail accounts in the Mail App on the iPad; http://convert-dvd-ipad.com/dvdipad/setup-hotmail-microsoft-exchange-ipad-2/

  • I bought an unlocked iphone 4s and it is not sending messages or emails with pictures taken with it.  What do I have to do?

    How do I send messages and emails with pictures attached from my iphone 4 s?

    Contact your Carrier and check you MMS enabled on your Plan.

  • I can connect to 3G, but cannot send messages or call with my iphone 4.

    I can connect to 3G, but cannot send messages or call with my iphone 4.

    SMS and calls are carrier features.  Check with your carrier

  • I am having problems sending messages.. Once I send it, it just beeps and says it failed to send and I have perfectly good service. Why is this happening??

    I am having problems sending messages.. Once I send it, it just beeps and says it failed to send and I have perfectly good service. Why is this happening??

        Hello llm007!
    That is quite a strange issue. What make & model phone do you have? When did this begin? Are you able to make & receive calls? You can troubleshoot this issue http://vz.to/12TLCsR on our website to get things working as quickly as possible.
    Thank you,
    MichelleH_VZW
    Follow us on Twitter @VZWSupport

  • My imessage isn't working when i send messages to people with iphones that have imessage it works with very few people, now it's starting to stop working with those people. help please.

    my imessage doesn't work between my friends and i. i have a new iphone 5. my messages only work with some people. with others imessage doesn't work in the first place and now its starting to stop working with other people help please.
    &amp; yes we all have imessage on.

    Hi there,
    I see that you are having IMessage problems. Some of the problems might be:
    - Your friends IMessage is not activated (you have to activiate it with your apple id)
    - Your IMessage is not activated
    Here is some links to another person`s Imessage problems:
    https://discussions.apple.com/message/17301880#17301880
    https://discussions.apple.com/message/20142285#20142285
    https://discussions.apple.com/message/18988318#18988318
    Hope that helps!

  • Why can't send message to friends with imessage?

    I tried to send messages to my friends with my touch, but after i typed in my friend's Apple ID (email address), it said this user has not registered. I have tried several other friends, but it did not work either. However, friend succeeeded in sending me a message. What is the problem? What is wrong?

    Hello,
    if you didnt find a solution yet, i'd like to ask if you enabled iMessage on your device? to enable it, you must first disable it, then enable again, just once, then you can use it, you friend should also do it...
    i had this problem at first too, then searched on the web, and saw that we had to do this first...

  • When send message it's says " messagae send failure" but message already send.why?

    when send message it's says " message send failure" but message alredy send.why?

    Go through the troubleshooting steps under "If you see 'Waiting for Activation'..." in this article: http://support.apple.com/kb/ts4268.

  • Sending Message Type from the same Logical System to 2 different ports

    Hi,
    I need to transfer the same message type 'DEBMAS' in the same logical system,
    to 2 differenet port - directly to XI (as an IDOC) and to function (as a PROXY),
    In XI this are 2 different interfaces.
    I see in we21 that when adding message type in outbound I can also write message code or message function so I tried adding an additional row of DEBMAS with message code but it did not work.
    Thanks,
    Naama

    Hey,
    This question should not be posted here, but in the XI forum,
    anyways,you can do it in 2 ways
    1) You can send the message to XI, and in XI it should be configured to send to
    two different places, which can be done in the Receiver Communication Channel, one would be IDoc Receiver and another would be a SOAP Receiver. ( here you send one message to XI and XI will send it to the PROXY )
    2) You can specify the settings in your Partner profile (we21)and while generating the Port (we20).
    Regards,
    Samson Rodrigues.

  • I keep trying to send messages but they won't send no matter how many times I try

    I keep trying to send messages on my iPad and they are sending. It was working yesterday

    Are you sure you have a good wifi/internet connection?
    Using FaceTime http://support.apple.com/kb/ht4319
    Troubleshooting FaceTime http://support.apple.com/kb/TS3367
    The Complete Guide to FaceTime + iMessage: Setup, Use, and Troubleshooting
    http://tinyurl.com/a7odey8
    Troubleshooting FaceTime and iMessage activation
    http://support.apple.com/kb/TS4268
    Using FaceTime and iMessage behind a firewall
    http://support.apple.com/kb/HT4245
    iOS: About Messages
    http://support.apple.com/kb/HT3529
    Set up iMessage
    http://www.apple.com/ca/ios/messages/
    Troubleshooting Messages
    http://support.apple.com/kb/TS2755
    Setting Up Multiple iOS Devices for iMessage and Facetime
    http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
    FaceTime and iMessage not accepting Apple ID password
    http://www.ilounge.com/index.php/articles/comments/facetime-and-imessage-not-acc epting-apple-id-password/
    Unable to use FaceTime and iMessage with my apple ID
    https://discussions.apple.com/thread/4649373?tstart=90
    For non-Apple devices, check out the TextFree app https://itunes.apple.com/us/app/text-free-textfree-sms-real/id399355755?mt=8
     Cheers, Tom

  • Sending messages . I can't send messages from iPad air. Can anyone help

    I cannot send messages from my iPad . Can anyone help

    1. Messages on the iPad can only be sent to other iDevices
    2. The receiving party must also be registered with iMessage
    Note: The two above conditions must be met.

  • TS2755 I am having difficulty sending messages on my iPad. the send button will not activate. Can someone help?

    My ipad will not send messages using imessage. I works and then stops as if it is locked up. My iphone works well as does my macpro. Any suggestions?

    Did you try downloading the movie from iTunes on your iPad?  I know it takes longer but I'd try that. 
    Also try to reset all settings. 
    Settings > General > Reset. Reset all settings. 

  • Can i send pdf 15mb file with adobe send?

    Can i send a 15mb PDF file with adobe send please? At the moment i'm having to send my PDF file as an attachment to email and it takes ages to send. i'm looking for a quicker and cheap way to send my PDF files please can you help?

    Hi there,
    Thanks for posting! A 15 MB file should be easy to send with Adobe Send. Here's a little information on how to get started: https://forums.adobe.com/docs/DOC-4474
    If you need any more specific instructions, just let me know and I'll be happy to help.
    Best,
    Rebecca

Maybe you are looking for