Strange characters showing up in Essbase Server pick list

I have one user, that is logging into her Essbase spreadsheet addin and seeing all kinds of strange characters following each server name in the Server drop down list within the Essbase System Login window. Any ideas what would cause this?
What we have found is the Server names and strange characters are showing up in the registry key: "HKEY_CURRENT_USER\Software\Hyperion Solutions\Essbase\Login". Normally you would see something like this in this key:
(Default)    Reg_SZ    (Value not set)
Server        Reg_SZ    ServerName1
Server1      Reg_SZ    ServerName2
Server2      Reg_SZ    ServerName3
etc.
What is showing now, is the original list of servers, with 10 or so new ones that repeat the server names that were already there followed by strange characters. There were 10 extra entries in this particular persons drop down list. We deleted them from the Registry and she was good for a few minutes and then they came back!! Anybody seen this before? We are running 11.1.2.1 of the Oracle Essbase Spreadsheet Add-in. Excel 2010. Windows 7. She is also using the In2HypEssbase ribbon, but so are many others, and she is the only one experiencing this problem.
Thanks,
Mike

Sorry, I forgot to mention that we did delete them from the registry and they did disappear from the drop down list. But a little while later it happened again! They seem to keep coming back and we don't know why. Again, she is the only person in the company that has had this issue. I have had her shutdown everything and reboot her pc with no luck as well, just to make sure there wasn't something quirky going on in the memory of the pc.
Mike

Similar Messages

Essbase server not listed in Shared Services

Hello,
Installed and configured 11.1.2.3 successfully on Windows Server 2008R2.(Essbase, Planning and WebAnalysis)
In Shared Services it is showing Shared Services, Studio and Reporting only.
Its not showing Essbase. I just gone through essbase log and deleted essbase.sec file and again configured but no use, still its not showing. after that restarted the system also.
I am able to login to EAS console, i can create users in essbase but not in EAS. create and disply user options are greyed out.
Can you please let me know how to resolve this issue?
Thanks,
Prathap

Hello John,
Its not standalone installation. Below error log for yesterday.
[Tue Jul 16 08:30:07 2013]Local/ESSBASE0///2212/Error(1051683)
Attempt to retrieve connection information from the registry failed. Please check reg.properties file and try again.
[Tue Jul 16 08:30:08 2013]Local/ESSBASE0///2212/Info(1056797)
Incremental security backup started by SYSTEM. The file created is [C:\Oracle\Middleware\user_projects\epmsystem1\EssbaseServer\essbaseserver1\bin\ESSBASETS_1373988608.BAK]
[Tue Jul 16 08:30:08 2013]Local/ESSBASE0///2212/Info(1051051)
Essbase Server - started
[Tue Jul 16 08:30:08 2013]Local/ESSBASE0///2212/Error(1051549)
Can not convert Essbase to Shared Services mode when Essbase is not configured with Shared Services or the initialization process has failed
[Tue Jul 16 08:30:08 2013]Local/ESSBASE0///2212/Warning(1056822)
Failed to migrate Essbase to HSS security mode during startup. Check SharedServices_Security_client.log. May need to remove essbase.sec and any of the newly migrated Essbase applications from HSS, then rerun configuration tool.
[Tue Jul 16 08:30:08 2013]Local/ESSBASE0///2212/Info(1056800)
Validation of back up file [C:\Oracle\Middleware\user_projects\epmsystem1\EssbaseServer\essbaseserver1\bin\ESSBASETS_1373988608.BAK] completed with status 0
And today removed essbase.sec and reconfigured... and in log it is showing
[Wed Jul 17 00:43:43 2013]Local/ESSBASE0///2236/Info(1051283)
Retrieving License Information Please Wait...
[Wed Jul 17 00:43:43 2013]Local/ESSBASE0///2236/Info(1051286)
License information retrieved.
[Wed Jul 17 00:43:43 2013]Local/ESSBASE0///2236/Info(1051227)
No JVM location specified in essbase.cfg. Will try to load from library path
[Wed Jul 17 00:43:44 2013]Local/ESSBASE0///2236/Info(1311019)
Classpath during JVM initialization: [;C:\Oracle\Middleware\EPMSystem11R1\common\jlib\11.1.2.0\epm_j2se.jar;C:\Oracle\Middleware\EPMSystem11R1\products\Essbase\EssbaseServer\java\essbase.jar;C:\Oracle\Middleware\EPMSystem11R1\products\Essbase\EssbaseServer\java\essbaseRegistry.jar]
[Wed Jul 17 00:43:56 2013]Local/ESSBASE0///2236/Error(1051223)
Single Sign On function call [css_init] failed with error [CSS Error: CSS method invocation error: getInstance: Failed to get CSSSystem instance, please check SharedServices_Security_Client.log for more information]
[Wed Jul 17 00:43:56 2013]Local/ESSBASE0///2236/Info(1051198)
Single Sign-On Initialization Failed !
[Wed Jul 17 00:43:56 2013]Local/ESSBASE0///2236/Info(1056815)
Essbase 64-bit - Release 11.1.2 (ESB11.1.2.3.000B4412)
[Wed Jul 17 00:43:56 2013]Local/ESSBASE0///2236/Info(1051232)
Using English_UnitedStates.Latin1@Binary as the Essbase Locale
[Wed Jul 17 00:43:56 2013]Local/ESSBASE0///2236/Error(1051683)
Attempt to retrieve connection information from the registry failed. Please check reg.properties file and try again.
[Wed Jul 17 00:43:57 2013]Local/ESSBASE0///2236/Info(1056797)
Incremental security backup started by SYSTEM. The file created is [C:\Oracle\Middleware\user_projects\epmsystem1\EssbaseServer\essbaseserver1\bin\ESSBASETS_1374047037.BAK]
[Wed Jul 17 00:43:59 2013]Local/ESSBASE0///2236/Info(1051051)
Essbase Server - started
[Wed Jul 17 00:43:59 2013]Local/ESSBASE0///2236/Info(1056800)
Validation of back up file [C:\Oracle\Middleware\user_projects\epmsystem1\EssbaseServer\essbaseserver1\bin\ESSBASETS_1374047037.BAK] completed with status 0
[Wed Jul 17 00:44:21 2013]Local/ESSBASE0///3544/Info(1042059)
Connected from [fe80::6963:3165:951c:f79d]
Thanks,
Prathap

Strange characters starting to pop up everywhere, why?

so ive been using arch for quite a while now but recently ive noticed something very strange, that never occured before
why are theese strange characters showing up all over the place?
(in the password box it used to have ******* , now it has YYYYYYY, wtf?)
Last edited by tjwoosta (2009-04-04 02:00:19)

molom wrote:That's obviously a font problem, change your font and see if the same thing happens.
BTW does it only happen on Firefox?
hmm
its just strange because ive been using the same font ever since installing but ive never seen theese characters
and afaik yes its only with firefox
edit: also i just noticed but its all like that in the firefox menus too, but not in any other programs menus
Last edited by tjwoosta (2009-04-04 02:14:56)

Sales Order in Pick List

Hi all
How to display the Sales Order Document Number in Pick List to show in a Pick List User Defined Title field?
Kedalene

Hi Kedalene,
If i understand u correctly then Sales Order no is already in Pick List form.
If that Column is not visible then activate from Form Setting of Pic List. Column Name is Doc No which will show Sales Order no of Pick List.
If i am not understanding then Please explain more.
Thanks
Regards::::
Atul Chakraborty

Excel shows strange characters over Remote desktop

Hi,
Experiencing this weird issue were when I RDP to my computer , the characters in excel sheet display weird characters
For instance the letter A looks squished
When opening the same excel sheet locally, the normal text is displayed.
Repaired office, looked for updates and nothing seems to fix it.
All your help will be greatly appreciated.

First of all.   I did not say we only had the problem with Server 2008 R2.   We DO NOT have any problem at all with Server 2008 R2.   The only problem is when using RDP to run an application on either Server 2003 or Server 2008.
That means the original version, the 32-bit version of Server 2008.
We have just tried various clients. The clients tried include XP, Win 7 and Win 8.1.   On Win 8.1 the RDP version is 6.3.9600.   On XP the RDP version is 6.0.6001.   I am not sure which RDP was being used on Win 7.
All of these clients had the same problem that I am posting about.   Strange characters.   They almost look like an incorrect character set.
The very same application that is giving us problems via RDP was tried by running directly via the LAN and WAN. When this app is run in this manner everything looks fine and there are no strange character issues. Just in case anyone wants to
suggest that we run this app in that manner, forget it!   The reason we run using terminal services is because the performance is way too slow of the WAN link if we try to run direct. I also want to point out that this app has been running,
using terminal services for several years now and there has not been an issue.
As for screen shots, I'm working on that.

Essbase server is not showing in the windows services (11.1.2.1)

Hi All,
Essbase server is not showing in the windows services 11.1.2.1. when I checked the processes from task manager it is there.
Regards,

The windows service for essbase in 11.1.2.x is an OPMN service "Oracle Process Manager..."
Cheers
John
http://john-goodwin.blogspot.com/

Shared Services doesnt show my Essbase server

Hi, im wondering if anyone out there can help.
I have been working on a new System9 Installation.
I have installed all of the Foundation software (Shared Services), Web analysis on a windows 2003 32 bit server and installed the Essbase application on a windows 64bit. I have gone through the configuration process and registered all of the products with shared services, however when i connect to shared services through http://SERVER:port/interop/ and sign in i cant see the essbase server? im really lost with this and not sure what to try.
I have set up my SQL databases and shared severices is talking to them i guess as SS works. (HSS, BIPLUS)
On all the setups i left the standard defualt credentials as the same. so on the essbase install the user name is admin and password, password for instence. Does this make a difference?
Any help will be greatly appreciated as i am very lost with this.

Hi,
You won't see the essbase server in shared services until you convert essbase to shared services security mode.
If you log into EAS and connect to your essbase server, expand the server and right click security, choose "Externalize Users", then follow the options to convert to shared services security, more detailed information available at :- http://download.oracle.com/docs/cd/E10530_01/doc/epm.931/html_eashelp/sec_mode.htm
Cheers
John
http://john-goodwin.blogspot.com/

[SOLVED] Font problem. Zsh prompt shows strange characters.

I am seeing strange characters in Zsh prompt only, bash works fine. I probably did not follow the font configuration section of Arch Beginner's Guide properly during installation. Earlier I had problems with login consoles too (tty2, tty3, all those black screens you can go to using CTRL+ALT+F2/F3 etc.) But I fixed those problems by creating /etc/vconsole.conf.
Zsh problem still remains. I am using oh-my-zsh.
I am out of ideas as to what to do. Please help.
Last edited by Hindol (2013-04-23 08:37:47)

What happens if you remove all the oh-my-zsh stuff?
From your screenshot it looks like you are in X: you might want to change your thread title as it is a little misleading.
Check your locale while you are at it.

Strange characters on report from field overrun

We have a report, created with Cystal Reports 10, that is now giving us an issue. It is displayed via web browser.
When displayed using Crystal Enterprise 10, it looks fine. But when displayed with CR XI r2 JRC, we get strange characters after the field when the field on the report is overrun. The field on the report is not formatted wide enough for all data but this has not been an issue in the past, the overrun just displayed fine.
The display we are getting looks like:
For short data we get:
*TEST
For longer data (overrun) we get:
*TEST1瀲瀀猀
That should have displayed *TEST12.
I think I can get around this by formatting the field wider (I have not tried it yet) but we wanted to know if this was a known issue with a root cause / fix.

- The report is only generated and viewed via the web browser. A web screen takes criteria for the report data, does an SQL call to pull the data into a report table, and then calls the CR report viewer to display the data.
- JRC is the java Runtime Component. In CR XI, a package is supplied to install as part of the web server for doing the web report viewing withut having to install CR Enterprise.
- The original .rpt file, the report template, does not have the characters in it nor do they show up in Crystal Reports in any way that I have found to try to test.
- With using the JRC, there is no CE10 database. As noted above, CR Enterprise is not installed. As for the database that contains the report data table, it is MS SQL Server 200 with all appropriate patches applied.
I just tested extending the display field to well longer than the data but it did not help. The strange characters are still being displayed.

A stranger is showing up under "Shared" in my network

A stranger is showing up under "Shared" in my network. "Frank's Macbook Pro." I don't know anyone named Frank and my internet connection (comcast) is secured. I looked under "preferences/sharing" and didn't find a way to "Frank's Macbook Pro" from showing up. Advice? I'm a newbie. Please explain simply. Amy

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. All it does is to collect information about the state of the computer. That information goes nowhere unless you choose to share it. However, you should be cautious about running any kind of program (not just a shell script) at the request of a stranger. If you have doubts, search this site for other discussions in which this procedure has been followed without any report of ill effects. If you can't satisfy yourself that the instructions are safe, don't follow them. Ask for other options.
Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
4. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
5. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
6. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts 51 4 300 25 5120 KiB/s 1024 85 \\b% 20480 1 MB/s 25000 ports 'com.autodesk.AutoCad com.evenflow.dropbox com.google.GoogleDrive' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 ` route -n get default|awk '/e:/{print $2}' ` 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^$[0-9]+$ /,"");n=$0;getline;} $NF=="'${p[45]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n\t(%s)\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}')printf("%s (UID %s) is using %s '${p[$2]}'\n",$0,u,q);} ';};s=(' /^ *$|CSConfigDot/d;s/^ */ /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/\/Users\/[^/]+/~/g ' ' s/^ +//;5p;6p;8p;12p ' ' {sub(/^ +/,"")};NR==6;NR==13&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ s/ *:$//;x;s/\n//;/Apple|Genesy|Intel|SMSC/d;s/\n.*//;/\)/p;};/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;} ' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' '/(sh|ng|ic)$/p' ' $3~/[0-9]:[0-9]{2}$/ { $4="";gsub(" "," ");gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}')print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR==2'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' ' s/^.{52}//;s/ .+//p ' ' /Launch[AD].+\.plist$/;END{if(NR<100)print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$/ { print $3;} ' '/\.(framew|lproj)/d;/plist:|:.+(M.+exec|scrip)/s/:[^:]+//p' '/root/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/;END{if(NR<100)print "/System/"};' '/^\/usr\/lib\/.+dylib$/p' '/\/etc\/(auto_m|hosts[^.]|peri)/s/^\.\/[^/]+//p' ' /\/(Contents\/.+\/Contents|Frameworks)\//d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| ","||kMDItem'${p[35]}'=");sub("^.."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[9]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/ { next;} /%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a)print "CPU: "a;if(b)print "I/O: "b;if(c)print "Net: "c" (KiB/s)";if(d)print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' /lR/ { if($2<='${p[25]}')print $2;} ' ' BEGIN { FS=":";} { n=split($3,a,".");sub(/_2.+/,"",a[n-1]);b=b"\n"$2" "a[n-1]" "a[n]" "$1;c=c$1;} END { d="sort";print b|d;close(d);if(c)print("\n\t* Code injection");} ' ' NR!=4{next} {$NF=int($NF/10240)} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L)f=f"\n\t"$0;} END { F=FILENAME;if(!F)exit;if(!f) f="\n\t[N/A]";"file -b "F|getline T;if(T!~/^(A.+ E.+ text$|POSIX sh.+ text ex)/) F=F" ("T")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n\t...and %s more line(s)\n",l-L);} ' ' BEGIN{FS="= "} /Path/{print $2} ' ' /^ +B/{ s/.+= |(-[0-9]+)?\.s.+//g;p;} ' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' '/:/!p' ' /:/{$0="'"${p[28]}"'"};1;' ' $0;END { if(NR<100)print "com.apple.";} ' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil PlistBuddy whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup );c2=(com.apple.loginwindow\ LoginHook '-c Print /L*/P*/loginw*' '-c Print L*/P*/*loginit*' '-c Print L*/Saf*/*/E*.plist' '~ $TMPDIR.. $ -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' '-c Print\ :'${p[35]}' 2>&1' '-c Print\ :Label 2>&1' '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status '-F bsd -k Sender kernel -k Message CReq "Beac|caug|dead[^l]|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA$|pagin|proc: t|Roamed|rror|ssert|Thrott|timed? ?o|WARN" -k Message Rne "Goog|SMC:" -o -k Sender fseventsd -k Message CReq "SL"' '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/*/*.{BS,Bas,Es,OSXU,Rem}*.bom' '{/,}L*/Lo*/Diag* -type f \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true $ -execdir stat -f:%Sc:%N -t%F {} \;' '-L {/{S*/,},}L*/Lau* -type f' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Compon,Ex,In,iTu,Keyb,Mail/B,P*P,Qu*T,Scripti,Sec,Servi,Spo}* -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto_master,{cron,fs}tab,hosts,{launchd,sysctl}.conf} /usr/local/etc/periodic/*/* .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l );N1=${#c2[@]};for j in {0..8};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n 'syscall::'${p[33+j]}':return {@out[execname,uid]=sum(arg0)} tick-10sec {trunc(@out,1);exit(0)}'";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents launchd Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP RSSI Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear;};for i in 0 1;do eval ' A'$((1+i))'() { v[0]=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "${v[0]}" ]];};A'$((3+i))'() { v[0]=` while read i;do eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "${v[0]}" ]];};A'$((5+i))'() { v[0]=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "${v[0]}" ]];};';done;A7(){ v[0]=$((`date +%s`-v[3]));};B2(){ v[$1]="${v[0]}";};for i in 0 1;do eval ' B'$i'() { unset v[0];((v['$((i+1))']==0))||{ v[0]=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v[0]=` paste -d: <(echo "${v[$1]}") <(echo "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v[0]=`grep -Fv "${v[$1]}"<<<"${v[0]}"`;};C0(){ test "${v[0]}"&&echo "$_";};C1() { [[ "${v[0]}" ]]&&printf "${f[$1]}" "${l[$2]}" "${v[0]}";};C2() { v[0]=`echo ${v[0]}`;[[ "${v[0]}" != 0 ]]&&C1 0 $1;};C3() { v[0]=`sed -E "${s[0]}"<<<"${v[0]}"`&&C1 1 $1;};for i in 1 2;do for j in 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;A0;{ A2 0 $((N1+1)) 2;C0;A1 0 $N1 1;C0;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D22 0 $((N1+4)) 5 4;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;A1 4 19 11;B4 0 0 44;C3 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&D22 11 17 17 20;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 52 0;B4 0 5 54;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 52 6;B4 0 7 54;B3 4 0 22;A3 14 6 52 0;B4 0 8 54;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;A2 4 20 21;B7 6;B2 9;A4 14 7 53 9;B2 10;B6 9 10 4;C3 25;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 53 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;D13 24 24 32 31;A1 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&D13 21 0 32 19;D23 14 1 48 42;D23 14 2 48 43;D13 14 3 49 5;D22 4 4 50 0;D13 4 5 32 1;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D23 22 9 37 7;B1&&D13 10 42 32 40;D23 20 42 32 41;D13 25 37 32 33;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;D22 32 31 43 38;B1&&for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;B1&&D22 29 35 46 39;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
7. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
8. If you see an error message in the Terminal window such as "syntax error," enter
exec bash
and press return. Then paste the script again.
9. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
10. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report the results. No harm will be done.
11. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At or near the top of the results, there will be a line that begins with "System Version." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
12. When you post the results, you might see the message, "You have included content in your post that is not permitted." It means that the forum software has misidentified something in the post as a violation of the rules. If that happens, please post the test results on Pastebin, then post a link here to the page you created.
Note: This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

[SOLVED] nvidia-310.19 and strange characters in eclipse

After system update yesterday (including nvidia-310.19) i got a few strange characters in eclipse source editor window from time to time.
I reverted back to nvidia-304.64 and now problem is gone.
Can someone with nvidia-310.19 check if they also see this problem ?
It may take some time for the strange characters to show up.
Last edited by cleanrock (2012-11-25 07:23:24)

Don't know if this helps, but...
The latest nvidia driver broke my system graphically (couldn't modprobe nvidia), so I rolled back nvidia and nvidia-utils. Then the system loaded xfce OK, but began to display odd chars...some big, some malformed...very goofy. I just now replaced the driver with the "legacy nvidia" driver (extra/nvidia-304xx) and everything is fine. The first install attempt failed due to existing files in place, so I deleted them then ran the install again...Looks great now.
UPDATE: the font corruption came back with a vengeance. Downgrading xorg-server to the previous version seems to have done the trick....
Last edited by purple12 (2012-11-18 02:05:32)

Essbase server not expanding

This is strange , in EAS console I am able to expand essbase server from other env through prod eas server except prod essbase server, though it shows success login.
also if I switch the eas server to dev and add essbase prod server , it expands..
no version mismatch or java mismatch.
same behavior with thick and think client

What does EAS log says ??
Also, are you sure..you have added Prod APS in provider tab...
It may be chance that, at your testing time their may be heavy load on essbase , and as you switched, load decreased..means worth to give test couple of times to make sure ..
Cheers!
Sh!va

Unable to load German characters in NON Unicode Essbase Cube

Hi Guys,
This is what we want to do:
Build a Cube for Germany on our Essbase server in US. Our users will access cube using Excel Add-In from Germany. But since the Essbase server is in US, system environment variable ESSLANG is set to English_UnitedStates.Latin1@Binary.
The version of Essbase we are using is 7.1.3.
What we tried & failed:
To load German characters from our dimension build Text file, we added a header: //ESS_LOCALE German_Germany.Latin1@Default
at the beginning of the dim build Text file hoping the rule file will understand that the file contains German characters & load it correctly. Then using EAS I load the dimensions using its corresponding rule file.
Essbase loads the dimensions correctly, with NO Error, but when it encounters German characters it Replaces it with a Question Mark "?"
Some of the German characters are:ß Ü ü Ö ö Ä ä Å Ä Ö
Lastly, the reason we do not want to build Unicode cube is because Excel Add-In will not work with Unicode cubes.
Its urgent. Please help.
Thanks.

The simple and easy way to check
non-unicode character sets are not supported on unicode system any longer. Am I right?
Transaction code i18N
Select
trouble shooting --> printing test --> smartforms --> multiple scripts, select your output device and see print preview. it will display all supported characters.
I guess, above information will be useful for closing the thread.
Regards,
SaiRam

Crystal Parameter Hierarchy Pick List not showing in Infoview

Hello,
We are having an issue with crystal reports not showing the hierarchy pick list in infoview.
We have 3 environments, Dev, QA, Prod.
Business Objects environments consist of 3 separate servers
Dev
Windows Server 2003 64bit
BOXI 3.1 with Service Pack 2
Integration Kit 3.1 with SP2
Crystal Reports V1 SP2
QA
Windows Server 2003 64bit
BOXI 3.1 with Service Pack 2
Integration Kit 3.1 with SP2
Crystal Reports V1 SP2
Prod
Windows Server 2003 64bit
BOXI 3.1 with Service Pack 2
Integration Kit 3.1 with SP2
Crystal Reports V1 SP2
SAP BW Environments consist of 2 server landscapes, with DEV / QA sitting on 1 and production on its own.
ServerA
Dev and QA
ServerB
Prod
We create a crystal report in Dev BOBJ, and publish to DEV SAP BW system sitting on ServerA.
The picklist shows hierarchy properly in Dev Infoview.
We then LCM the report to QA BOBJ, and Do Not publish to QA SAP BW system sitting on ServerA.
We transport the role that the report was published to, from Dev SAP BW to QA SAP BW
The picklist shows hierarchy properly in QA Infoview.
We then LCM the report to PROD BOBJ, and Do Not publish to PROD SAP BW system sitting on ServerB.
We transport the role from QA SAP BW to Prod SAP BW
The picklist does NOT show hierarchy properly in Prod Infoview.
We are a bit confused on why the picklist works properly on QA Infoview without publishing, but will not work on Production Infoview.
Is it because the repository objects for the picklist contain some server paths? (Since DEV and QA sit on the same server "ServerA")
Do we need to publish in production SAP BW for the hierarchy pick list to function?
Any help would be appreciated,
Thanks!
Nick

Hi Nick,
Did you get this resolved? We are encountering the same issue. We have migrated our report from QA to Prod using BW Transport and then used BW Publisher to publish to BOE. The parameter list shows in InfoView for Dev and QA, but not Prod.
We're using BOE SP2 FP 2.8

Pages document turned to gibberish-strange characters in rectangles. Can't read underlying text (still there)

I use a Pages document (password protected) as a frequent reference. It is 22 pages of text. Suddenly most text was replaced with strange characters, each encased in a little rectangle, so document was unreadable. Selecting a section of text, I could right-click and see that underlying text was still there, just not readable onscreen. Style was "Normal*." I don't know what the " * " means. I selected all and changed style to "Heading 9" on the list. All text reappeared, so my data is ok - for now (though not formatted as I want it). I can't trust Pages, however, and don't know what caused the problem or how to avoid it.
Note that the style now shows "Heading 9*". I don't know why the " * ". I tried selecting all and making "Normal" the global style, but the strange characters wouldn't budge. Switching back to Normal brings back gibberish.
Some text is Verdana; I just noticed that changing font also got rid of gibberish. Changing back to Verdana brought back gibberish.
Note that not every line of text was changed to gibberish; some were just fine.
Other Pages documents are fine - right now. I notice that there are asterisks in Style in other text documents.
I'm an experienced computer user, new to Pages in the fall when it came with my MacBook Air. In this document, format isn't all that important, but I can imagine where this would be a huge disaster for other types of documents.
Any help in figuring out what's going on most appreciated.

Tom -
"That sounds like Apple's Last Resort font, which gets used when for some reason the app forgets about the font being used. Use Fontbook to make sure you don't have duplicate Verdanas on your machine. Also try cleaning your font caches with Onyx or by doing a safe boot"
Wow! Who would have guessed! Thank you for the advice; Fontbook revealed a number of duplicate fonts - ot Verdana, interestingly enough - which I have now resolved. I then switched all text to Trebuchet MS, and everything reverted to normal. I can live with Trebuchet.
This problem appeared on the same day (before or after I wasn't sure) I installed MS Office. Could this have caused the problem?
Thanks for your prompt reply, explanation and solutions.

Strange characters showing up in Essbase Server pick list

Similar Messages

Maybe you are looking for