Strange difficulites with WRT160n

I have added a WRT160n rev3 to my system at home.
The wireless is working fine. Problem is the wired port. I have updated the router to the latest firmware and the NIC is a Atheros L1 Gigabit Ethernet with the latest driver.
I am running Windows 7 and the problem is:
When I turn on the system the NIC produces a (!) from the start.
If you disable and reenable the network from the OS the NIC will work.
I am using Verizon internet.
The router is to set to DCHP and the others are defaulted.
I did have another linksys router attached before putting on the WRT160n.
Any suggestions?

The exclamation mark means that the device's driver isn't properly installed, or that its misconfigured or BIOS not assigning resources correctly.Check this link.

Similar Messages

Strange issue with WEBI schedule Report

Hi All,
I have a strange issue with schedule WEBI reports, a schedule report runs for Hours , i reschedule it again by deleting the instance and the schedule report never got succeed even after running for hours.
Any idea???
regards

Hi Manoj,
1. Try to put some filters in the report and then run the report. if it takes less time, then probably your query is fetching very large data.
2. MDX query error may be the reason , this error come when a query runs endless, please try running the query 2-3 times, or when load on server is less.
Hope this will help,
Anamika.

Strange issue with RAM upgrade: It works but it doesn't! Please help.

Hello Everyone,
I have a very strange issue with my iMac since upgrading my RAM from 4 to 12 gig. When I first installed the new RAM it booted up and ran great. The next time I went to boot the iMac up it swtiched on but didn't get as far as the first white boot up screen. I tried turning it off and on a few times using the power on/off button but still no success. I decided to remove the RAM and reseat it. The computer then booted up again fine. Here's the problem though: when I went to switch my iMac on the next day it wouldn't boot up. Again, I took the RAM out and put it back in and the iMac booted up fine. I've checked the status of the RAM in the system profiler and it reports that everything is OK. So, I'm at a loss. Obviously, I don't want to go through this process every time I want to start up my Mac. Any ideas/solutions would be very gratefully received.
Many thanks in advance.

I completely agree with you. It will be one of the 3 issues you outline. The machine was bought brand new and has never given me a problem. It is just the introduction of the new RAM that has started a problem. However, I did just risk a restart and it booted up fine. I don't know if a restart is any different to shutting down and then pressing the on/off button to start the computer. Maybe my last reseating has done the trick or maybe my thinking is flawed because restarting involves a different process to booting up by pressing the on/off button. I don't know.
In the part of the world I'm sitting in it's night time now so I will leave the diagnostics running and check the results in the morning. I hope the issue is now resolved anyway. This sort of thing takes me back to my dark PC days although in this case I know it's probably not the Mac's fault.
Thanks again. Very much appreciated.

Strange issue with rights of account, used by SSIS (Foreach Loop Container does not return file names without Admin rights on server)

Hello everyone.
Faced very strange issue with account, which is used to run SSIS package.
The specific package uses Foreach Loop Container to retrieve file names within the specified folder, and put them into Import file task.
The package is set up to run under specific service account. This service account is given all permissions (Full control) to the folder where source files reside.
So the issue is: SSIS package fails to execute this task (Foreach Loop Container and then Import), and shows that no files are found in the directory (although files ARE there).
Once we're adding the service account into local Administrators group on the SQL Server, it works! Removing - does not work again. We cannot leave the service account as SQL server's admin as it's prohibited by our IT policies, and is just a bad practice.
Any ideas, please?
MCP

Here's the real log output:
Date 16.04.2014 12:47:09
Log Job History (RU-BW: Update)
Step ID 1
Server Server
Job Name RU-BW: Update
Step Name bw_import_cust_master_data
Duration 00:00:02
Sql Severity 0
Sql Message ID 0
Operator Emailed
Operator Net sent
Operator Paged
Retries Attempted 0
Message
Executed as user: service_account Microsoft (R) SQL Server Execute Package Utility Version 10.50.4286.0 for 64-bit Copyright (C) Microsoft Corporation 2010. All rights reserved. Started: 12:47:09 Error: 2014-04-16 12:47:11.45
Code: 0xC0202070 Source: bw_import_cust_master_data Connection manager "Input" Description: The file name property is not valid. The file name is a device or contains invalid characters. End Error Error:
2014-04-16 12:47:11.47 Code: 0xC0202070 Source: bw_import_cust_master_data Connection manager "Input" Description: The file name property is not valid. The file name is a device or contains invalid characters. End
Error Error: 2014-04-16 12:47:11.48 Code: 0xC0202070 Source: bw_import_cust_master_data Connection manager "Input" Description: The file name property is not valid. The file name is a device or contains invalid
characters. End Error Error: 2014-04-16 12:47:11.48 Code: 0xC020207E Source: Import file Flat File Source [1] Description: The file name is not valid. The file name is a device or contains invalid characters.
End Error Error: 2014-04-16 12:47:11.48 Code: 0xC004701A Source: Import file SSIS.Pipeline Description: component "Flat File Source" (1) failed the pre-execute phase and returned error code 0xC020207E.
End Error DTExec: The package execution returned DTSER_FAILURE (1). Started: 12:47:09 Finished: 12:47:11 Elapsed: 2.324 seconds. The package execution failed. The step failed.
MCP

Strange Problems With Display and Permissions Since 10.5.1 update.

Since I've done the 10.5.1 update I have been having a strange problem with my desktop and dock displays. On my desktop I have these strange lines that appear any time I log in or open any application, the lines never go away and change locations on the screen once I open an application or move a window. My dock has the reflective shelf for about half of it, the rest is a dull grey. I've also had problems with verifying and repairing my permissions. I can never actually complete either permissions task. I've used some third party apps, they always fail as well. The only time I can actually repair my permissions is by booting in to single user mode and doing a fsck -f command. When I boot back in to Leopard and try to use the Disk Utility to repair, it continues to fail.
I'm not sure if the video problem I am having stems from a permissions issue or possibly a corrupt video driver. Either way, I've done a lot research and haven't found anyone with the same problems I have been having so I thought I would give these forums a shot.
I am using a PowerMac G4 Quicksilver with dual 800Mhz, 1.5gb RAM, and a GeForce4 Ti 4600 128mb video card.
Here is a screen shot of the line and dock problem.
Here is a screen shot of my "About This Mac.
If anyone could lend some light on this issue, I would greatly appreciate it.
Thanks
Jeff

you can pile it on this: http://discussions.apple.com/thread.jspa?threadID=1246649&tstart=0
btw - no solution yet.

Strange issue with external monitor, only working when external speakers plugged in (using Thunderbolt to VGA adaptor)

Hey – I am having a very strange issue with my external monitor; where it only works if my external speakers are plugged in and connected.
I am using a late 2011 Macbook pro, running Mavericks 10.9.4, along with an MBox 2 (USB Audio Interface), and two powered speakers (KRK Rokit 5). This setup has had no issues. I have just acquired an external monitor (Benq T2200HD), which I am using with a thunderbolt to VGA adaptor (a cheap Chinese knockoff adaptor).
To start - I plugged the monitor in with the thunderbolt adaptor, and it powers up and works fine. However, there is a nasty buzz coming from the speakers. I did some research and it looks like a simple ground loop issue. I did a bit of troubleshooting, and this is where things get weird.
What I found is - If I unplug the MBox, the monitor loses signal from the computer (displaying ‘No Signal Detected!’). Further, if I keep the MBox plugged in, however unplug both the cables from the MBox to the speakers, the monitor loses signal. It doesn’t matter if the speakers are turned off, however they need to be plugged in (or the monitor loses signal). Weirder still, I can unplug the MBox, however the monitor will work if I plug in the speakers through my macs headphone jack.
Simply put, the monitor only works if there is a direct connection between the computer, the speakers, and the power source. What is going on here? Is the monitor grounding through the computer port, to the speakers (I don’t know how this works, is this possible?). Could it somehow be the cheap VGA adaptor I am using?
Some other information:
- Everything is plugged into the same multi-box for power. I have tried plugging things into separate sources, and the result is the same.
- If I unplug the thunderbolt adaptor, then the speaker noise disappears straight away.
- The ground noise doesn’t appear in my headphones, which are plugged into the MBox.
Any information would be great – am I missing something here, or is this genuinely weird?

Well, I went back into Best Buy to test on 3 other laptops (2 Asus, and their floor model for this Sony). It seems to be doing the same problem so at least I was able to rule out broken hardware issue on my particular laptop.
Here's what I did to test:
Since I couldn't really install Adobe Premiere on their machines, I used the DVIO software (http://www.carr-engineering.com/dvio.htm) and a 5 min clip I captured. I transferred onto their machines, hooked up my Sony D8, and attempted to play the video. It would play for 15 seconds and then stop and jitter with a loud noise (like it does on my laptop). I even tried changing each machine's firewire driver to the legacy one and same results. I pulled a brand new 4 pin to 4 pin firewire cable off their shelf and still the same problem.
I think I've nailed it down to Win7x64 bit Home Edition not playing nice with Firewire driver. Very annoying. I can't find any concrete evidence of this from other users on any of the forums that have my particular problem, but from my own testing, it's all I can conclude.
I have 2 other things I can try:
1. Opening the laptop and looking at the firewire to maybe find appropriate driver (ugh, I don't want to have to open this thing up).
2. Upgrading to Win7x64bit Pro and possibly testing with XP on the new MS Virtual PC (http://www.microsoft.com/windows/virtual-pc/). I can't do it with my Home edition apparantly.
Who needs to view video on an external TV anyways....sheeesh...(scarcasm).
Tim

I am having strange issue with my apple tv...i set up pictures to scroll through to the tv using home sharing. Now album covers are interspersed with my pictures. I have been using apple tv for a while and never had this happen before

I am having strange issue with my apple tv...i set up pictures to scroll through to the tv using home sharing. Now album covers are interspersed with my pictures. I have been using apple tv for a while and never had this happen before

Are you watching this content though iCloud or though from iTunes on your local computer? If it is from iCloud have you tried downloading the content to iTunes and watching it on ATV from that source to see if it still happens? This is geerally a much more reliable way to view the content. Easer to fast forward and rewind too.
- I have a stable internet connection
Clearlly you don't
>(Ive tested on other devices)
Which does not tell you anything about the specific connnection from ATV to iCloud.
>I am able to stream Netflix problem free from my AppleTV without so much as a hicup
Again which does not tell you anything about the specific connnection from ATV to iCloud.
>- I am able to download the episodes to my phone, ipad, and computer without any issues
Again which does not tell you anything about the specific connnection from ATV to iCloud. It does remove your ISP throattly traffice as a possible cause though. So that is good.
Have you checked your wireless rounter? Tried doing the factory restor on it? Upgrading it's firmware? Is it and or ATV getting extreamly hot when this problme happens?

Strange problem with Adobe Acrobat X (crash without a trace)

Hi,
I have a strange problem with Adobe Acrobat. It happens totally randomly, it leaves no signs in system logs.
What is happening: during my work Adobe Acrobat sudennly crashes. After a crash I cannot run it again - system seems to do something for a second, but then nothing happends. When i look into taks manager - there are no processes of Acrobat.exe. It just doesn't want to run. What I need to do is to reinstall whole Adobe Acrobat - which requires restart.
I've already tried to restart system after crash, it doesn't help - reinstall is required.
Sometimes everyting is fine for a 3 months, sometimes crash happens a week after the previous one. It also happens in very different situations (somtimes while opening a file, sometimes when doing something simple, sometimes in more complex tasks).
Has anyone encountered a similar problem?
Acrobat version: 10.1.1
System info: Windows 7 64 bit

Hi Kelvin,
Please let me know what OS version you are using.
The error also shows OS requirements not met.
Futher please try the steps below :
> Enable the hidden Admin Account on Windows 7 ( Ref : http://www.howtogeek.com/howto/windows-vista/enable-the-hidden-administrator-account-on-wi ndows-vista/ )
> Disable all Non-Microsoft Startup Services. (Ref : http://helpx.adobe.com/x-productkb/global/disable-startup-items-services-windows.html )
> Disable all the Antivirus softwares like CA, Norton,Mc Afee etc. temporarily from the computer.
Reboot and try installing in the new enabled Admin user account and check.
Please refer the Kb Doc : http://helpx.adobe.com/creative-suite/kb/error-exit-6-exit-7.html.
Also see Troubleshoot with install logs | CS5, CS5.5, CS6 - http://helpx.adobe.com/creative-suite/kb/troubleshoot-install-logs-cs5-cs5.html for information on how to review your installation logs
Regards,
Rave

Strange behaviour with Safari.

Very strange behaviour with Safari this morning. Pages loading piecemeal or partially. The content only becomes viewable after the cursor has passed over the area. Have cleared caches and reported it but I'm wondering if this is a local matter here in the UK. Anyone suffering similar problems? Firefox is responding perfectly normally.

I see a reply has come back via a previous post. As I am trying to get a response to this one I shan't reply there but I should point out that for me, this is an isolated problem. I do use open DNS but with no track history of problems there , I can't blame that.
In the last few minutes normality has returned.

Strange problem with Subviews on 1.0 Beta

Hi,
I'm having a strange problem with SubViews on 1.0 Beta. I'm not sure If I'm being stupid and have done something wrong, or if there's a problem here.
My application is directly based on one of the examples, so the structure etc is almost identical. I've simplified the files below to avoid confusing the issue.
The default landing page (greeting.jsp) looks like this:
<%@ taglib declarations for HTML and CORE taglibs %>
<HTML>
<HEAD><title>Insulation Layer Demo</title></HEAD>
<body bgcolor="white">
<f:view>
<jsp:include page="sysstatus.jsp" />

</f:view>
</body>
</HTML>
sysstatus.jsp looks like this:
<%@ taglib declarations for HTML and CORE taglibs %>
<f:subview id="SystemStatusView">
<h:form id="systemStatusForm">
<h:selectboolean_checkbox id="System1Available" value="#{SystemStatus.system1Available}"/>System 1 
<h:selectboolean_checkbox id="System2Available" value="#{SystemStatus.system2Available}"/>System 2
<h:command_button id="submit" action="success" value="submit" />
</h:form>
</f:subview>When I view this page, the checkboxes all seem to work okay (in that their state is preserved across calls etc), but the formatting is very screwy. The resulting page looks something like:
<chkbox1> <chkbox2> <Submit>
System 1
System 2
<Other HTML content from greeting.jsp>When I look at the HTML source code being generated, it is genuinly being generated as above, that is, all the form tags first, and then the rest of the content. Interestinly, I tried adding a ${SystemStatus.system2Available} into the body text, and it was rendered as literal text (i.e. not evaluated as EL), which is very curious -- makes me wonder if the included file is included as text, rather than JSP, although the custom taglibs and <f:form> tags etc are not in the generated HTML.
If I lift all the content between the <h:form> tags (inclusive) out of sysstatus.jsp and put it in greeting.jsp in place of the <jsp:include> tag, all is well.
Any ideas? All help gratefully recieved!
Thanks,
Paul

Personally, I think it is a bug in the rendering model of JSF itself because if you include any non-JSF tags, they don't get rendered according to my understanding of the what the spec says (in the location the tags are written).
The only workaround that I could come up with is to use straight JSF tags in all of your layers. Things are then rendered the way that they "should" be rendered.
You could try wrapping all of your HTML tags in <f:verbatim> tags and see if that helps.
Good luck!
David

Strange problem with the mail app on an iPad

I've got a bit of a strange problem with the mail app on an iPad - it's sending and receiving mail ok but won't let you delete mail. If you keep at it, it appears as if you have deleted mail (though takes a very long time as you just have to keep deleting it over and over again) - but the size of the app still keeps going up - reached 600mb so far, even though there is hardly any mail or attachments (goes up quite a lot each time you try to delete anything) - any idea what's causing this and how I can fix it?
It occasionally comes up with a dialogue panel saying to check my account settings, but I have checked those and they are fine. The little 'loading' icon just keeps spinning constantly too.

go to Settings > Mail > your account > Advanced > Move Discarded Messages Into
and make sure that Deleted Mailbox is ticked, and not Archive Mailbox
You can also adjust how long the deleted mail stays in the trash immediately below that.
If you are talking about a gmail account, you may also have to login to your account on the gmail server and update the settings there. This is what Barney previously posted about that:

Strange problem with ACLs

Hi,
I have just migrated an oracle database from 11.1.0.7 on Win Server 2003 to 11.2 on Linux 64 bit. I am having a strange problem with ACLs - I can create the ACL but when I perform either of the following two commands:
SELECT * FROM DBA_NETWORK_ACLS
or
SELECT * FROM NET$_ACL
I get no rows returned. The ACL exists somehow because if I try and create it again I get the error that it exists. Has anyone got any advice here? Something is out of sync and I need to know how to fix it up.
Thanks
Adam

BEGIN
DBMS_NETWORK_ACL_ADMIN.CREATE_ACL (
acl => 'email_server_acl.xml',
description => 'Network connection Email Server',
principal => 'MAIL',
is_grant => TRUE,
privilege => 'connect');
END;
PL/SQL procedure successfully completed.
select * from DBA_NETWORK_ACLS;
(no rows)
BEGIN
DBMS_NETWORK_ACL_ADMIN.CREATE_ACL (
acl => 'email_server_acl.xml',
description => 'Network connection Email Server',
principal => 'MAIL',
is_grant => TRUE,
privilege => 'connect');
END;
ORA-31003: Parent /sys/acls/ already contains child entry email_server_acl.xml
ORA-06512: at "SYS.DBMS_NETWORK_ACL_ADMIN", line 252
ORA-06512: at line 2
Edited by: Adam J. Sawyer on 15/04/2011 17:08

Strange issue with external monitor, only working when external speakers plugged in

Hey – I am having a very strange issue with my external monitor; where it only works if my external speakers are plugged in and connected.
I am using a late 2011 Macbook pro, running Mavericks 10.9.4, along with an MBox 2 (USB Audio Interface), and two powered speakers (KRK Rokit 5). This setup has had no issues. I have just acquired an external monitor (Benq T2200HD), which I am using with a thunderbolt to VGA adaptor (a cheap non-apple adaptor).
To start - I plugged the monitor in with the thunderbolt adaptor, and it powers up and works fine. However, there is a nasty buzz coming from the speakers. I did some research and it looks like a simple ground loop issue. I did a bit of troubleshooting, and this is where things get weird.
What I found is - If I unplug the MBox, the monitor loses signal from the computer (displaying ‘No Signal Detected!’). Further, if I keep the MBox plugged in, however unplug both the cables from the MBox to the speakers, the monitor loses signal. It doesn’t matter if the speakers are turned off, however they need to be plugged in (or the monitor loses signal). Weirder still, I can unplug the MBox, however the monitor will work if I plug in the speakers through my macs headphone jack.
Simply put, the monitor only works if there is a direct connection between the computer, the speakers, and the power source. What is going on here? Is the monitor grounding through the computer port, to the speakers (I don’t know how this works, is this possible?). Could it somehow be the cheap VGA adaptor I am using?
Some other information:
- Everything is plugged into the same multi-box for power. I have tried plugging things into separate sources, and the result is the same.
- If I unplug the thunderbolt adaptor, then the speaker noise disappears straight away.
- The ground noise doesn’t appear in my headphones, which are plugged into the MBox.
Any information would be great – am I missing something here, or is this genuinely weird?

Hello cgoldberg11
Please go to the below link to test if you are having a speaker hardware failure.
Testing for Hardware Failures (Windows 7)
This will rule out hardware failure, let me know how that goes.
Thanks
If I have solved your issue, please feel free to provide kudos and make sure you mark this thread as solution provided!
Although I work for HP, my posts and replies are my own opinion and not those of HP. .....
Reguards,
Mo

Some strange problem with Flash/As3

Hi,
I am having some strange problem with my flash cs3.
Whatever script I write in as3 doesn't work, even a stop() function doesn't work . But when I change my publish setting to as2 it works fine.
Not sure about the root cause, may be some setting or preference or my cs3 is corrupted.
Can anybody please advise.
Thanks,
Kishor

try this
create a new fla as3,
select frame 1
open the actions panel
paste in the following code
var squares:Array = new Array;
setup();
function setup():void {
 for (var i = 0; i < 25; i++) {
 var square:Sprite = new Sprite();
 //square.name = "square" + i;
 square.graphics.beginFill(Math.random() * 0xffffff);
 squares.push(square);
 squares[i].graphics.drawRect(0, 0, 100, 100);
 squares[i].x = i*3;
 squares[i].y = i*3;
 squares[i].filters = [];
 square.graphics.endFill();
 stage.addChild(squares[i]);
for (var j = 0; j < squares.length; j++) {
 squares[j].addEventListener(MouseEvent.MOUSE_DOWN, dragMovie);
 squares[j].addEventListener(MouseEvent.MOUSE_UP, dropMovie);
 squares[j].buttonMode = true;
function dragMovie(event:MouseEvent):void {
 event.target.startDrag();
function dropMovie(event:MouseEvent):void {
 event.target.stopDrag();

Strange problem with my ipod 2g after upgrade to os 4.2

Strange problem with my ipod 2g after upgrade to os 4.2
the problem with volume some times when i switch on the ipod i hear the sound
alarm rings it's work too i can hear it .. but the problem i cant hear anything else as yourtube or music i cant hear buttons sound when i typing
i hope i get help

I would try in order:
- Reset the iPod:
Reset iPod touch: Press and hold the On/Off Sleep/Wake button and the Home
button at the same time for at least ten seconds, until the Apple logo appears.
- Restore the iPod from backu via iTunes.
- Restore the iPod to factory defaults/new iPod.

Strange difficulites with WRT160n

Similar Messages

Maybe you are looking for