Strange issue in Family dependents details

We are implementing ESS/MSS for India country grouping.
ESS Personnel Information -->>> Family dependents service allows the employee to add new spouse at anytime. It means the New Spouse button is always available in WDJ screen even though a spouse already been added.
Ideally, New spouse button has to be disabled. I have checked the WD iview personalization and no luck found. These buttons come from spro customization settings in ECC backend.
I have checked -
>>>> Determine Active Subtypes and Make Settings. The check box "New Button Always Available on overview" is a mandatory field and it a time constraint value 2.
Furthermore, I have checked "Determine Active Subtypes and Make Settings" for Infotype 0021 and subtype 1 with Use case "B2" (button shouldn't be available once an infotype record exists).
Anyone has gone through this problem ? How to disable the button ? Any inputs in this regards would be greatly help.
Regards,
Anil Kumar

Please do not give answers just for sake of getting points.
As I already mentioned, we are implementing ESS/MSS for India country grouping and you are telling to give the following entries
08 0021 1 A1
08 0021 2 B3
in View V_T7XSSPERSUBTYP where 08 stands for United Kingdom. Now, why is the entry for 08 (UK) required here ?
By the way, the issue has been resolved. It was related to time constraint issue and the solution is in spro customization itselfs.
Personnel Management --->>> Personnel Administration -->> Personal data --->>> Family --->>> Personal data --->> Define family types.
Just unchecked the required option here.
Thanks for your time.

Similar Messages

Strange issue when synching Iphone

Hi,
Had a strange issue and wondered if anyone could explain what could possibly have happened?
I purchased an album from iTunes on Saturday on my MacBook Pro. My iTunes library is actually stored on my time capsule, but everything was fine.
However today at work (so separated from my Time Capsule) I plugged in my iPhone to recharge. As standard it tried to synch - and this is when the issue occurred:
A message appeared stating that there were purchased items on my iPhone that were not in my iTunes library, that I must authorise the machine else the items would be removed. When clicking on the authorise button, the authorisation / iTunes store login screen appeared - containing the username [email protected] - which is completely unknown to me. I have absolutely no idea who this person is and I have never seen that email address before.
I changed the login to my details and signed in - where the system said that my machine was already authorised for my account - so the synch continued normally (apart from the usual messages when disconnected from my time capsule).
How the **** did my machine think it was attached to wesley patt's account? Has this happened to anybody else?
Cheers for any help
Darren

I just tried to sync my wife's iphone and the same name [email protected] came up. This can not be a coincidence. This has to be a virus of some sort. My wife is unable to make purchases from her computer right now even though the account detail works. Did this happen to either of you? I'm reporting this to apple and referencing this board.

Strange issue with speaker - stays on after a call has ended

Hi all,
I have the latest iOS version (7.1) on my iPhone 5.
I haven't had any hardware issues before, but 2 days ago something strange has began happening.
Strange issue with speaker - it stays on after a call has ended and plays the sounds that it gets from the microphone.
Only way to stop it is to make another call and hang up.
Any ideas?

oops...we're in the same boat....look m8 that ios 7.1 is rubish i recently after updating mine the ear stop working i called apple customer care we went throu wiv that adviser we restore the phone up 2...3 times nofin happen then da guy told me finally it was not a software problem....but hardware problem and they booked me up 2 take it 2 the near apple store because it is only from apple u can get da matter fixed however if your phone where unlocked outside your network provider or again from the coner street tech....? 4get cos once those form street unlock your phone you just have the same cover or boby let say it ....but your IMEI and all manufacture detail will changed........the good news is if your phone still have manufacture waranty iz free from apple if your waranty run out? apple will ask you 2 pay up 290£.....
hope this replay may hel you m8
stay bless

Strange issue with WEBI schedule Report

Hi All,
I have a strange issue with schedule WEBI reports, a schedule report runs for Hours , i reschedule it again by deleting the instance and the schedule report never got succeed even after running for hours.
Any idea???
regards

Hi Manoj,
1. Try to put some filters in the report and then run the report. if it takes less time, then probably your query is fetching very large data.
2. MDX query error may be the reason , this error come when a query runs endless, please try running the query 2-3 times, or when load on server is less.
Hope this will help,
Anamika.

HT201080 How do I edit a family members details?

How do I edit a family members details?
I have set up family sharing in iCloud and accidentally saved an incorrect birthdate. Can I edit these details?

Move their iTunes library to it, launch iTunes with the Shift key held down and choose it, log out of your iTunes Store account, and then into theirs. If the library contains rented movies, those won't play.
(122612)

Files transferred to external HD end up in trash - very strange issue

Hi,
I seem to be having a very strange issue, hopefully somebody can help or has seen this before.
Hardware: MacBook Air, Western Digital Passport external HD, 250gb, formatted NTFS.
Software: OSX 10.7 Lion, Paragon (allows me to write to an NTFS formatted HD)
Issue Summary: I copy something to the external HD; I empty trash; the file I copied is deleted from the external HD. It doesn't happen every time.
I do also seem to have a persistent folder in trash called "WD Sync Data" that won't go away unless I re-delete it as it's also in the root of the drive. Not sure if this is related somehow.
Recently I copied 3 video files inside a folder to the HD, then disconnected the HD. When I reconnected it a while later and noticed that inside the "WD Sync Data" folder in trash were the 3 files I'd copied. I then looked inside the same folder on the root of the drive and the files were there, instead of inside the folder that I'd copied to the drive, which had vanished. If I hadn't noticed and had emptied the trash, those files would've been deleted.
It's definitely happened more than once; last time I actually deleted the files from my computer after copying, then emptied trash, and they were gone from the external HD also.
I've only found one person who seemed to be experiencing a similar problem back in 2010. It sounds similar though it could've been user error: http://www.mac-forums.com/forums/apple-notebooks/188224-weird-external-hard-driv e-trash-problem-help-please.html
Has anyone experienced this or have any suggestions?

Quick update: I ran a verify then a repair in Disk Utility as there were a couple of errors. Hopefully this has solved the issue, however it'd still be interesting to know if anyone's come across this before and what caused it?

Oracle Identity Manager 9.1.0.2 & WebLogic Strange Issue

Hello,
I am running OIM 9.1.0.2 (new installation) and WebLogic 10.3.3 in a clustered environment. I am having a strange issue where the resolution is eluding me.
This install is running on Windows 2008 x64 Standard and using the x64 JRockit Java.
What's happening is when I configure the managed server to run as a windows service, OIM isn't detected on the server. I can bring up xlWebApp but an unable to log into that or the Design Console. When launching the Diagnostic Dashboard it statest that OIM isn't installed.
If I stop the service and log into WebLogic and start the managed server from within the Admin Console in WebLogic, everything works just fine.
Any thoughts on how to troubleshoot this and ultimately resolve this? The service correct startes the managed server as I can watch it start up in the admin console but when it starts that way, OIM isn't detected. Very odd.
Thanks,
Andrew

Oracle confirmed with us that it is certified for 10.3.3 though it may not be published yet.
At any rate I figured out the problem today. The script I used to create the service was missing the JAVA_OPTIONS section from the xlStartManagedServer.cmd file. Once I added that and re-created the service, all is well.
Thanks

Windows Vista and BPS0 - Strange issue

I just got a new HP Pavilion laptop with Vista and I have a strange issue:
All transactions work (SE80, RSA1, ...) except BPS0. The moment I enter TCode BPS0, I get completely logged out (all sessions). No error messages, no dumps. It just logs me out silently.
Is this happening only to me?
I use Windows Vista Home Premium edition and AMD Turion processor 64x2.
Any suggestions appreciated.
Thanks

i too recently bought hp pavillion and my problem is i cant able to logon it gives me error of 10054, connection broken, can you tell me which things restrict me to log on. any settings are there to be performed. do mail me, i have been trying from 2 week my id is [email protected]

Strange issue with RAM upgrade: It works but it doesn't! Please help.

Hello Everyone,
I have a very strange issue with my iMac since upgrading my RAM from 4 to 12 gig. When I first installed the new RAM it booted up and ran great. The next time I went to boot the iMac up it swtiched on but didn't get as far as the first white boot up screen. I tried turning it off and on a few times using the power on/off button but still no success. I decided to remove the RAM and reseat it. The computer then booted up again fine. Here's the problem though: when I went to switch my iMac on the next day it wouldn't boot up. Again, I took the RAM out and put it back in and the iMac booted up fine. I've checked the status of the RAM in the system profiler and it reports that everything is OK. So, I'm at a loss. Obviously, I don't want to go through this process every time I want to start up my Mac. Any ideas/solutions would be very gratefully received.
Many thanks in advance.

I completely agree with you. It will be one of the 3 issues you outline. The machine was bought brand new and has never given me a problem. It is just the introduction of the new RAM that has started a problem. However, I did just risk a restart and it booted up fine. I don't know if a restart is any different to shutting down and then pressing the on/off button to start the computer. Maybe my last reseating has done the trick or maybe my thinking is flawed because restarting involves a different process to booting up by pressing the on/off button. I don't know.
In the part of the world I'm sitting in it's night time now so I will leave the diagnostics running and check the results in the morning. I hope the issue is now resolved anyway. This sort of thing takes me back to my dark PC days although in this case I know it's probably not the Mac's fault.
Thanks again. Very much appreciated.

Strange issue with rights of account, used by SSIS (Foreach Loop Container does not return file names without Admin rights on server)

Hello everyone.
Faced very strange issue with account, which is used to run SSIS package.
The specific package uses Foreach Loop Container to retrieve file names within the specified folder, and put them into Import file task.
The package is set up to run under specific service account. This service account is given all permissions (Full control) to the folder where source files reside.
So the issue is: SSIS package fails to execute this task (Foreach Loop Container and then Import), and shows that no files are found in the directory (although files ARE there).
Once we're adding the service account into local Administrators group on the SQL Server, it works! Removing - does not work again. We cannot leave the service account as SQL server's admin as it's prohibited by our IT policies, and is just a bad practice.
Any ideas, please?
MCP

Here's the real log output:
Date 16.04.2014 12:47:09
Log Job History (RU-BW: Update)
Step ID 1
Server Server
Job Name RU-BW: Update
Step Name bw_import_cust_master_data
Duration 00:00:02
Sql Severity 0
Sql Message ID 0
Operator Emailed
Operator Net sent
Operator Paged
Retries Attempted 0
Message
Executed as user: service_account Microsoft (R) SQL Server Execute Package Utility Version 10.50.4286.0 for 64-bit Copyright (C) Microsoft Corporation 2010. All rights reserved. Started: 12:47:09 Error: 2014-04-16 12:47:11.45
Code: 0xC0202070 Source: bw_import_cust_master_data Connection manager "Input" Description: The file name property is not valid. The file name is a device or contains invalid characters. End Error Error:
2014-04-16 12:47:11.47 Code: 0xC0202070 Source: bw_import_cust_master_data Connection manager "Input" Description: The file name property is not valid. The file name is a device or contains invalid characters. End
Error Error: 2014-04-16 12:47:11.48 Code: 0xC0202070 Source: bw_import_cust_master_data Connection manager "Input" Description: The file name property is not valid. The file name is a device or contains invalid
characters. End Error Error: 2014-04-16 12:47:11.48 Code: 0xC020207E Source: Import file Flat File Source [1] Description: The file name is not valid. The file name is a device or contains invalid characters.
End Error Error: 2014-04-16 12:47:11.48 Code: 0xC004701A Source: Import file SSIS.Pipeline Description: component "Flat File Source" (1) failed the pre-execute phase and returned error code 0xC020207E.
End Error DTExec: The package execution returned DTSER_FAILURE (1). Started: 12:47:09 Finished: 12:47:11 Elapsed: 2.324 seconds. The package execution failed. The step failed.
MCP

Strange issue in custom Success/Failure captions

Hi,
I have a strange issue in my custom Success/Failure caption. If I use 'S' letter in my customized caption .bmp file, it is not showing properly in the captivate. Attached file is for your reference. I tried converting text into image in photoshop, still it shows the same thing. Any thoughts??
Thanks in Advance,
-Ajay

OK. That's what I thought.
So what I think is going on here is due to the way Captivate assembles text captions that can stretch to any size based on the component images. I think your corner image that contains the text is being stretched right at the point where the S character is located on the end of Congratulations. Captivate is achieving the resizable text caption by repeating the last few pixels of each background image.
If you want to test my theory, just make your Congratulations text slightly shorter (use a condensed font or make the font size smaller) and I think your issue will go away.

Strange issue in Report Builder

Hi All,
I am facing a strange issue in Report Builder.
I am having a report which is currently in production. when i am opening that report and just saving it without making any changes, then also the size of the report is reducing from 238 to 204 kb.
When i am executing this report in production then it is giving me the error "Invalid Body size"
Please hlep me or else have to ask God to save me.
Thanks
Aryan

Hi Hussien,
I tried thart solution but it not worked. i put some debug statement in Before Parameter form, after Parameter form, before report triggers. When i am running that report i am getting the debug statement of Before and After Parameter triggers but it is failing somewhere in Before Report Trigger.
I removed everything from Before Report Trigger and still the result is same "Invalid Body Size".
Please Hussien give me a some pointer which stage is processed between After Parameter Form trigger and Before Report Trigger.
Thanks
Aryan

Strange issue with external monitor, only working when external speakers plugged in (using Thunderbolt to VGA adaptor)

Hey – I am having a very strange issue with my external monitor; where it only works if my external speakers are plugged in and connected.
I am using a late 2011 Macbook pro, running Mavericks 10.9.4, along with an MBox 2 (USB Audio Interface), and two powered speakers (KRK Rokit 5). This setup has had no issues. I have just acquired an external monitor (Benq T2200HD), which I am using with a thunderbolt to VGA adaptor (a cheap Chinese knockoff adaptor).
To start - I plugged the monitor in with the thunderbolt adaptor, and it powers up and works fine. However, there is a nasty buzz coming from the speakers. I did some research and it looks like a simple ground loop issue. I did a bit of troubleshooting, and this is where things get weird.
What I found is - If I unplug the MBox, the monitor loses signal from the computer (displaying ‘No Signal Detected!’). Further, if I keep the MBox plugged in, however unplug both the cables from the MBox to the speakers, the monitor loses signal. It doesn’t matter if the speakers are turned off, however they need to be plugged in (or the monitor loses signal). Weirder still, I can unplug the MBox, however the monitor will work if I plug in the speakers through my macs headphone jack.
Simply put, the monitor only works if there is a direct connection between the computer, the speakers, and the power source. What is going on here? Is the monitor grounding through the computer port, to the speakers (I don’t know how this works, is this possible?). Could it somehow be the cheap VGA adaptor I am using?
Some other information:
- Everything is plugged into the same multi-box for power. I have tried plugging things into separate sources, and the result is the same.
- If I unplug the thunderbolt adaptor, then the speaker noise disappears straight away.
- The ground noise doesn’t appear in my headphones, which are plugged into the MBox.
Any information would be great – am I missing something here, or is this genuinely weird?

Well, I went back into Best Buy to test on 3 other laptops (2 Asus, and their floor model for this Sony). It seems to be doing the same problem so at least I was able to rule out broken hardware issue on my particular laptop.
Here's what I did to test:
Since I couldn't really install Adobe Premiere on their machines, I used the DVIO software (http://www.carr-engineering.com/dvio.htm) and a 5 min clip I captured. I transferred onto their machines, hooked up my Sony D8, and attempted to play the video. It would play for 15 seconds and then stop and jitter with a loud noise (like it does on my laptop). I even tried changing each machine's firewire driver to the legacy one and same results. I pulled a brand new 4 pin to 4 pin firewire cable off their shelf and still the same problem.
I think I've nailed it down to Win7x64 bit Home Edition not playing nice with Firewire driver. Very annoying. I can't find any concrete evidence of this from other users on any of the forums that have my particular problem, but from my own testing, it's all I can conclude.
I have 2 other things I can try:
1. Opening the laptop and looking at the firewire to maybe find appropriate driver (ugh, I don't want to have to open this thing up).
2. Upgrading to Win7x64bit Pro and possibly testing with XP on the new MS Virtual PC (http://www.microsoft.com/windows/virtual-pc/). I can't do it with my Home edition apparantly.
Who needs to view video on an external TV anyways....sheeesh...(scarcasm).
Tim

I am having strange issue with my apple tv...i set up pictures to scroll through to the tv using home sharing. Now album covers are interspersed with my pictures. I have been using apple tv for a while and never had this happen before

I am having strange issue with my apple tv...i set up pictures to scroll through to the tv using home sharing. Now album covers are interspersed with my pictures. I have been using apple tv for a while and never had this happen before

Are you watching this content though iCloud or though from iTunes on your local computer? If it is from iCloud have you tried downloading the content to iTunes and watching it on ATV from that source to see if it still happens? This is geerally a much more reliable way to view the content. Easer to fast forward and rewind too.
- I have a stable internet connection
Clearlly you don't
>(Ive tested on other devices)
Which does not tell you anything about the specific connnection from ATV to iCloud.
>I am able to stream Netflix problem free from my AppleTV without so much as a hicup
Again which does not tell you anything about the specific connnection from ATV to iCloud.
>- I am able to download the episodes to my phone, ipad, and computer without any issues
Again which does not tell you anything about the specific connnection from ATV to iCloud. It does remove your ISP throattly traffice as a possible cause though. So that is good.
Have you checked your wireless rounter? Tried doing the factory restor on it? Upgrading it's firmware? Is it and or ATV getting extreamly hot when this problme happens?

Huawei E220 strange issue running 10.6.2

Hi, I'm testing the Huawei E220 with a brand new Macbook Air running 10.6.2.
My provider is Vodafone IT.
I have a very strange Issue:
If I start the connection the Macbook Air suddenly shuts down a few seconds after the connection has been established. If I leave the modem connected to the usb port without activating a connection nothing happens.
Has anyone had this same problem??
This mac works perfectly with any other HSPDA usb modem.
Vodafone posted a new software for mac (Vodafone Mobile Broadband 3.04.10.00). This link can be useful (not only for Italy) because it is constantly updated:
http://www.business.vodafone.com/site/bus/public/enuk/support/10productsupport/laptop_connectivity/40_software/software/10_latest/pmac.jsp

my friends 13" mbp is also having trackpad problems. I plugged in an old usb trackball and that seems to to at least get me so I can run a hardware test off the applications dvd.

Strange issue in Family dependents details

Similar Messages

Maybe you are looking for