Strange legacy data migration problem to SAP CProjects

Dear all,
I am new to CProjects and currently working on migrating legacy data to CProjects through XML. I am facing some strange problems when migrating project data with multiple phases. If the project already exists in Cprojects, the XML import transaction hangs indefinitely and a timeout exception is thrown. While on the other hand, if I upload a new project (with same set of phases), it is readily imported without any problems.
Kindly help!
Thank you all!

Hi Vivek,
If the project already exists, the system creates a simulation from the imported data. You then need to move the simulation to your operational project by performing a reconcilliation. You can't simply overwrite an operational project via an import.
I have included some links below from SAP help which may help (cProjects 3.1).
http://help.sap.com/saphelp_cpro31/helpdata/en/26/cb8740f8aacf62e10000000a155106/content.htm
http://help.sap.com/saphelp_cpro31/helpdata/en/b0/d562404fb6cd01e10000000a155106/content.htm
Regards,
Lashan

Similar Messages

SAP Legacy data Migration Starategy/Process

Hi Friends
I would request you, if anybody let me knwo the process of legacy data migration into sap. What are steps I have to follow while doing legacy data migration. My questions are:
1) How to upload GL balances from legacy to SAP
2) How to upload Vendor and Customer open items into sap
3) Asset balances How to upload
4) what is the use of Migration clearing accounts.
Kindly provide if any documents for legacy data migration into sap.
Thanks in advance
Rao

Dear Rao,
Just check the bwlow link you can understand easly to upload the balances.
http://www.saptechies.com/sap-pdf-books-download/SAP_Go_live_strategy11248141773.pdf
Check the bwlow procedure for the same way do it.
First create 5 Dummy GL codes. These GL code should be zero at the end of uploading balances.
1     GL Offset Account               Dr
          Asset Offset Account          Cr
          AP Offset Account          Cr
          Sales          Cr
          Other GL's          Cr
2     Cash               Dr
     Consumption               Dr
     Asset Offset Account               Dr
     AR Offset Account               Dr
     Material Offset Account               Dr
     Other GL's               Dr
          GL Offset Account     x     Cr
3     AP Offset Account               Dr
          Vendor 1          Cr
          Vendor 2          Cr
          Vendor 3          Cr
4     Customer 1               Dr
     Customer 2               Dr
     Customer 3               Dr
          AR Offset Account          Cr
5     Fixed Asset 1               Dr
     Fixed Asset 2               Dr
          Asset Offset Account          Cr
          Acc. Depreciation Account          Cr
6     Stock Inventory Account               Dr
          Material Offset Account          Cr
Regards,

Legacy Data Migration

Source : SAP R/3
Target : SAP ECC
Data to be moved : GL Open Items
We need to migrate our Legacy data into SAP ECC.
Tel me the efficient way to do data transfer.
Any standard programs available for this ?
Or any technique should I have to follow for this upload.
Guide me please !
RJ

Hi,
Please close the thread if your problem is solved.
or else let us know.
<<text removed by moderator - it's true what you said, but it's too close to asking>>
Thanks & Regards,
Sudheer
Edited by: Matt on Nov 14, 2008 4:23 PM

Legacy Data Migration - GL Open Items

Source : SAP R/3
Target : SAP ECC
Data to be moved : GL Open Items
We need to migrate our Legacy data into SAP ECC.
Tel me the efficient way to do data transfer.
Any standard programs available for this ?
Or any technique should I have to follow for this upload.
Guide me please !
RJ

Hi,
Standard SAP tools for the upload are LSMW or BDC. Search this forum, you will find a lot of threads regarding this theme.
Regards,
Eli

Data migration Tally to SAP B1

Hi Friends
I need a information about data migration from tally to sap business one.
can anybody guide me how to do ?
regards
kamlesh

> Hi Friends
>
> I need a information about data migration from tally
> to sap business one.
> can anybody guide me how to do ?
>
> regards
>
> kamlesh
Hi Kamlesh,
AFAIK, there's no standar tool released by SAP to do the data migration from Tally directly. The possible is export the legacy data to MS Excel, format into DTW format, and import into Business One via DTW.
DTW - Data Transfer Workbench.
I don't know if any partner has developed add-on for this purpose.
Regards,
Chris

Legacy Data Migration - question on conversion

Hello All,
We are trying to build a generic tool which could help the conversion process in data migration.
For eg, If the material name in legacy starts with AB (AB6790), the same has to be referred in SAP as SQ6790.
So its replacing initial few characters during the conversion process.
Like this, I am expected to collect possible scenarios and
develop a generic tool, which can cover some possible conversion conditions.
Can you please help me with such scenarios, which you may have come across in project needs.
Thank you.
Meenakshi

Rahul,
I strongly suggest you do a search in the CRM General & Framework Forum on this topic. If you are looking for specific objects to migrate there are several posts on the major data elements in crm (transactions, business partners, products).
In general the technique is to use the LSMW combined with the XIF-IDOC adapter to convert data into the CRM system.
My blog here will explain the general process:
/people/stephen.johannes/blog/2005/08/18/external-data-loads-for-crm-40-using-xif-adapter
Thank you,
Stephen

Data migration tools in sap

hi,
i am newbie to s.a.p nd i got ma project related to data migration. we are taking data from legacy system to sap database. we are using a tool called cransoft. what about the future of this tool. how to plan my career in this data migration.need help from experienced persons. im a sap abap resource actually. im having practically no work using abap in this project.im very much concerned about ma career.help me out...
thank you

>>will my career depend on the tool im working in or it depends on data migration only
That is something which depends upon how much and what kind of experience you have, if you are an expert in one tool, then your career basically depends on it, but if you understand the concept and have good experience in multiple tools, then you will have broader domain.
In consulting, it is much easier to be an expert in one tool, you are not tied to one client and can find project somewhere else.
But if you are a permanent employee, then it helps to adjust your skillset as per the changing environment.
Having said that, you don't have to go after every tool in the market, try to diversify as per your interests and the market need.
Talking specifically about BODS, i have seen quiet a few clients using or planning to use it so its future looks bright, but then again, future can always change.
Thanks
Aamir

Data Migration help in SAP

Hi All
Can anyone suggest good datamigration tool,Actually we are migrating our data from Microsoft sql to ORACLE(SAP 4.7) and I have never done this kind of data migration.
I would appreciate small help also.
Thanks in advance.
Regards
Sukrut s

you need to get an OS/DB-Migration service to get support after migration. The migration itself on the production system must be done by a certified migration consultant.
Check
http://service.sap.com/osdbmigration
Markus

HT4889 Data migration problems

I have gotten half way through data migration from my MacBook to my new MacBook Pro. It has taken an overwhelming length of time to get this far but the process has not progressed for 24 hours. How do I get out of this process without damaging my computers or the data?

Hello Mongoi and welcome to  Discussions.
The new Intel's cannot connect with some of the older iMacs via Firewire. I had the same problem, so instead I connected the two via File Sharing (Connect to Server using the Intel to connect to my old G4) and moved things across manually.
Click on this link for some detailed information about the differences between your old and new system, keeping in mind you will need to move things across manually.
A Basic Guide for Migrating to Intel-Macs by Kappy
Have fun with your new iMac!
Message was edited by: roam

Performance Management - Legacy data migration

We are going live in mid-feb. We would like to migrate the legacy appraisal data (non-SAP) into SAP Performance Management
How do we do this?
Is it possible to create the VB , VC objects by a report. I am considering creating a transition appraisal document for this migration.

Hi Guys
Setting of the STATUS is possible via BAPI.
Once you create the Project definition you can then use the GUID and set the status of the newly created project.
I you want to set the STATUS to anything other than RELEASE. Make sure to set it to RELEASE 1st then to wat ever you choose. You can do both all of the above before you COMMIT
Below is some nasic code which worked for me.
*& Report YYPY001_TEST
REPORT YYPY001_TEST.
data i_trans type BAPI_TS_BUSINESS_TRANSACTION.
data e_return type BAPIRET2 OCCURS 0.
data e_return1 type BAPIRET2 OCCURS 0.
i_trans-BUSINESS_TRANSACTION = 'RELEASE'.
CALL FUNCTION 'BAPI_BUS2172_SET_STATUS'
EXPORTING
    project_definition_guid       = '44BDF2BDF5BB2075E1000000CB195E30'
IV_STATUS_PROFILE             =
    IS_BUSINESS_TRANSACTION       = i_trans
TABLES
    RETURN                        = e_return
CALL FUNCTION 'BAPI_CPROJECTS_COMMIT_WORK'
TABLES
    return        = e_return1

Data migration problems using Firewire

Hi everybody, this is my first post.
I have just bought an Intel-based iMac 20" 2.4 GHz running Leopard.
I tried to transfer data from an old (year 2000) iMac DV 450 MHz running OS 9.0.4, connecting the two machines by Firewire ports and using the Migration Assistant.
Everything was OK, in the sense that the Firewire icon with HD of the old Mac was correctly displayed, but was completely empty (no file/folder in it).
At the same time the Migration Assistant seemed to be blocked on "waiting for disks appearing", with no possibility to continue.
Any advice on how to solve this problem ? Have I to allow more time for the files to appear, or something wrong happened ?
Thanks a lot for you help.

Hello Mongoi and welcome to  Discussions.
The new Intel's cannot connect with some of the older iMacs via Firewire. I had the same problem, so instead I connected the two via File Sharing (Connect to Server using the Intel to connect to my old G4) and moved things across manually.
Click on this link for some detailed information about the differences between your old and new system, keeping in mind you will need to move things across manually.
A Basic Guide for Migrating to Intel-Macs by Kappy
Have fun with your new iMac!
Message was edited by: roam

Arabic data migration problem

I'm using SQL developer to migrate from SQL server 2005 database (whose encoding is Arabic) to and Oracle database (whose encoding is UTF16). The arabic data are migrated successfully but appear as ?????? marks. Is there a way to migrate the data successfully?
thx all

We are using 3 data base for the appllication developed in java.
One of our common table containing all the country location ( post code / zip ) details. Problem is that this details are insert to the data base using SQL*PUS or Sql command line available while installing oracle 10g / 10g express data base.
But when we run sql script with special characters like МП Летище Бургас ( Bulgarien )
INSERT INTO beoatlas2.OPTION(LANGUAGE,VERSION,TYPE,module,CODE,description,bemerkung,description2,description3) VALUES('DE','SCPRLD','122','ALL','BG001002','МП Летище Бургас','','','ext');
or Β΄ ΘΕΣΣΑΛΟΝΙΚΗΣ ( Griechenland - greece )
INSERT INTO beoatlas2.OPTION(LANGUAGE,VERSION,TYPE,module,CODE,description,bemerkung,description2,description3) VALUES('DE','SCPRLD','122','ALL','GR002002',N'Β΄ ΘΕΣΣΑΛΟΝΙΚΗΣ','','','ext');
it returns as ?????? marks . i set NLS_LANG to AL32UTF8 using command set NLS_LANG=AMERICAN_AMERICA.AL32UTF8
then also it displaying as ???????
I need to insert these details properly in Linux and windows Os using sql command line .
Any sujections are appreciated . Its very urgent .
Thanks & Regards
Shibin Thomas
[email protected]

Bank statement legacy data migration

Hi,
Has anyone migrated legacy bank statement data without migrating the FI line items?
Thanks & regards,
Tony

No, but I think that can be possible uploading EBS files but not posting them.

Legacy Data Migration - Correct Order

Can anyone tell me a relatively complete process for what order data has to be loaded into SAP?
Some information I have, but would like confirmation, is:
1 a - SAP Org (Client)
2     a - Chart(s) of Accounts
     b - SAP Org (Company)
3     a - Chart of Depreciation
     b - SAP Org (Controlling Area)                                                               c - SAP Org (Plant)
4     a - SAP Org (Purchasing Organization, Purchasing Group)          b - SAP Org (Storage Location)
     c - SAP Org (Depreciation Area)                                                          d - SAP Org (Cost Accounting Area)
5     a - SAP Org (Warehouse structure: storage type, area, bin)          b -
     c - SAP Org (Cost Center hierarchy; Cost Center; Cost Element)          d - SAP Org (Asset Class)
6      a - Material Master (n views)
     b - Asset Master
     c - Vendor Master
7      a - Purchase Requisition: open items
     b - Purchase Requisitions corresponding to POs: open items          c - Purchase Requisitions corresponding to AP: open items          d - Inventory balances
     e - Transfer Orders: open items
8     a - Purchase Order: open items
     b - Purchase Orders corresponding to Accounts Payable: open items     c - Material Reservations
9     a - Goods Receipts corresponding to Accounts Payable: open items
10     a - Accounts Payable: open items
11            a - AR: open items

Bumped.
Do I need to be asking my question a different way?
Regards

Data migration problems...

Hi,
I am trying to migrate the database from SQL Server environment to Oracle 10g database.
I am using SQL developer for the same.
On converting the captured model to oracle model , i am getting lots of migration errors and that is mostly in the stored procedures .
The general error is something like this :
Stored Procedure 'usp_CONTMGTDWRCreateDWR' has language id of 'MSTSQL' so will not output for generation .
And when i copy the MS-SQl code in the scratch editor and press the translate button , i am predominantly getting these two errors :
1) cannot translate null
2)cannot translate > Unknown object : unxepected end of tree : Line 0 Column 0
Can anyone tell me what do these errors mean and how can i go about correcting them??
Thanks in advance.
Shishir.

Hello Mongoi and welcome to  Discussions.
The new Intel's cannot connect with some of the older iMacs via Firewire. I had the same problem, so instead I connected the two via File Sharing (Connect to Server using the Intel to connect to my old G4) and moved things across manually.
Click on this link for some detailed information about the differences between your old and new system, keeping in mind you will need to move things across manually.
A Basic Guide for Migrating to Intel-Macs by Kappy
Have fun with your new iMac!
Message was edited by: roam

Strange legacy data migration problem to SAP CProjects

Similar Messages

Maybe you are looking for