Strange problem with AIX server and windows clients

I am having a real bizzare problem with WLS 7.0.1 running on AIX 5.1 and
clients on windows. We have J2SE Swing application as a client.
If the client is w2k or XP, the first client gets good response. If I start
another client the second client is horribly slow (2 sec vs 16 sec). Even if
I kill the first client the second client continues to be slow. If I have 2
clients open together, the first one continues giving 2 sec response while
the second one continues with 16 sec. For that matter if I start another
client after shutting down first one I get slow (16 sec) response.
If the client is NT client I always get good and consistent response from
the server. Irrespective of how many client I have on the NT machine, I keep
getting good response. NT and W2K laptops are seating right next to each
other on the same n/w and infact the NT is a much slower and lessor memory
machine than W2K.
We did similar tests keeping server on Solaris or NT server or W2K server,
and the clients "behave" normally i.e I get consistent repsponse time (it
may be slow or fast, but it is consistent and is consistent b/w NT and W2K).
We even tried putting my laptop on the same network as the AIX server, but
it did not help. Unfortunately some of our clients will be using AIX and
W2K.
HELP!!!!

"Cameron Purdy" <[email protected]> wrote in message
news:[email protected]..
Sounds like a reverse DNS lookup or similar network timeout.Thanks for the suggestion, but then why would the first client on w2k or XP
get a better performance and the subsequent clients get worse performance?
>
Peace,
Cameron Purdy
Tangosol, Inc.
http://www.tangosol.com/coherence.jsp
Tangosol Coherence: Clustered Replicated Cache for Weblogic
"vinay moharil" <[email protected]> wrote in message
news:[email protected]..
I am having a real bizzare problem with WLS 7.0.1 running on AIX 5.1 and
clients on windows. We have J2SE Swing application as a client.
If the client is w2k or XP, the first client gets good response. If Istart
another client the second client is horribly slow (2 sec vs 16 sec).
Even
if
I kill the first client the second client continues to be slow. If I
have
2
clients open together, the first one continues giving 2 sec response
while
the second one continues with 16 sec. For that matter if I start another
client after shutting down first one I get slow (16 sec) response.
If the client is NT client I always get good and consistent responsefrom
the server. Irrespective of how many client I have on the NT machine, Ikeep
getting good response. NT and W2K laptops are seating right next to each
other on the same n/w and infact the NT is a much slower and lessor
memory
machine than W2K.
We did similar tests keeping server on Solaris or NT server or W2Kserver,
and the clients "behave" normally i.e I get consistent repsponse time(it
may be slow or fast, but it is consistent and is consistent b/w NT andW2K).
We even tried putting my laptop on the same network as the AIX server,
but
it did not help. Unfortunately some of our clients will be using AIX and
W2K.
HELP!!!!

Similar Messages

[SOLVED] Routing problems with ssh server and openvpn client

My current setup is an arch box behind my wireless router. My wireless router is running scripts to update the dynamic dns for my internet connection and forwarding incoming requests to port 22 on the arch box. Simple so far.
Now I'd like to setup OpenVPN on the arch box to connect to a 3rd party vpn service but still listen for ssh connections. This way I can have my arch box always connected to the vpn but be able to access it from anywhere. I believe the problem is that openvpn sets up a default route to send all outgoing traffic out over the tunnel, but I don't know enough about routing to make this work. I saw another solution in the forum was running virtualbox and I find that so inelegant. I'm planning on eventually learning more about ip route and iptables but I was also hoping that a networking guru could help me get this set up quickly in the meantime.
ip route while not connected to vpn
default via 192.168.1.1 dev eth0 metric 202
192.168.1.0/24 dev eth0 proto kernel scope link src 192.168.1.11 metric 202
ip route while connected to vpn
0.0.0.0/1 via 10.120.62.9 dev tun0
default via 192.168.1.1 dev eth0 metric 202
10.120.62.1 via 10.120.62.9 dev tun0
10.120.62.9 dev tun0 proto kernel scope link src 10.120.62.10
23.29.126.102 via 192.168.1.1 dev eth0
128.0.0.0/1 via 10.120.62.9 dev tun0
192.168.1.0/24 dev eth0 proto kernel scope link src 192.168.1.11 metric 202
Last edited by ricka (2012-11-05 17:14:48)

First, meop, thanks for your reply. I did not use that method to solve the issue, but I'm going to do some more research into it (I'll speak to why I went another direction after the solution).
My solution so far has come from this resource http://forum.linode.com/viewtopic.php?t=8737
Since my server is behind a router, I do not have to worry about the public IP address changing and I was able to use the private IP in the route statements. Therefore, in my case, the solution was these three lines:
ip rule add from 192.168.1.11 table 128
ip route add table 128 to 192.168.1.0/24 dev eth0
ip route add table 128 default via 192.168.1.1
Keep in mind, as the article states, that applies to all ports (not just ssh). If you want to block other traffic, you need some extra iptables entries.
This also solves my end goal: Being able to connect to this 3rd party VPN with a simple ssh redirect from my always connected server. I can now ssh -D <port> <myhost>, set up chrome to use <port> as a proxy, and have everything redirecting over this VPN connection without any hassle.
meop, this setup is connecting to a 3rd party VPN service and they provided the config scripts for the client. I considered tinkering with that, but found this solution to work and I'm going to do some more reading about each solution to figure out which is the best overall.
enovak, I grepped dmesg and did not see any entries about martian source.
Now another question that comes to mind: What if this server were actually NOT behind a firewall and it's public IP changed? I think you'd somehow have to have a script to check to see if your Dynamic IP address changed and also have a route that only that script would use (send everything else out the VPN route). Then, if your IP address changed, you'd have to change these routes around. I'll leave that solution to someone else :-)

Problems with games server and client

Hi! I am making an MMORPG game and I have problems with the server and client connection.
I can connect to the server, but when a second player does, the server console tells me this:
java.net.SocketException: Connection reset
After that, all clients disconnect.
Which is the problem?
How can I solve it?
Thank you so much

Here is how my sever work. I took some of this code from a book called Killer Programming Games in Java. If you google for it, you will find it for sure.
TourGroup tg = new TourGroup(); // this object stores information about all clients connected to the server
    try {
      ServerSocket serverSock = new ServerSocket(PORT);
      Socket clientSock;
      while (true) {
        System.out.println("Waiting for a client...");
        clientSock = serverSock.accept();
        new TourServerHandler(clientSock, tg).start(); // this is the thread that monitors each client
    catch(Exception e)
    { System.out.println(e); }
} This is some code of TourServerHandler
public TourServerHandler(Socket s, TourGroup tg)
    this.tg = tg;
    clientSock = s;
    name= "?";
    cliAddr = clientSock.getInetAddress().getHostAddress();
    port = clientSock.getPort();
    System.out.println("Client connection from (" +
                 cliAddr + ", " + port + ")");
public void run()
// process messages from the client
    try {
      // Get I/O streams from the socket
      BufferedReader in = new BufferedReader(
   new InputStreamReader( clientSock.getInputStream() ) );
      PrintWriter out =
new PrintWriter( clientSock.getOutputStream(), true );
// and here goes the rest... The TourServerHandler thread uses this code to send messages:
tg.broadcast(msg); tg.broadcast works like this:
synchronized public void broadcast(String cliAddr, int port, String msg)
// broadcast to everyone but original msg sender
    TouristInfo c; // this object stores info about the client
    for(int i=0; i < tourPeople.size(); i++) {
      c = (TouristInfo) tourPeople.get(i);
        c.sendMessage(msg);
} This is the error part
public void sendMessage(String msg)
PrintWriter out;
    out.println(msg);
      System.out.println("OK");
} I can't find any error but I still get that Connection reset exception...

Problem with national characters on windows client

Hello there,
I'am having problem with national characters on windows client.
All national data stored in NVARCHAR2 colums, applications (.net) works fine,
but in sqlplus:
select city from test_table;
- everything ok, sqlplus shows national characters
select dump(N'<national symbols>') from dual
- returns
Typ=96 Len=12: 0,191,0,191,0,191,0,191,0,191,0,191
select * from test_table where city = N'<national symbols> '
- always returns nothing
As i understand the problem in
sql query text (and national literals) convertion
to servers "WE8ISO8859P1" encoding, Is it possible
to solve the issue?
Thanks in advance
PS.
Console in right mode (chcp=1251)
sqlplus shows russian messages well
Server (oracle 9 on solaris):
select * from nls_database_parameters
NLS_NCHAR_CHARACTERSET AL16UTF16
NLS_SAVED_NCHAR_CS WE8ISO8859P1
NLS_LANGUAGE AMERICAN
NLS_TERRITORY AMERICA
NLS_CURRENCY $
NLS_ISO_CURRENCY AMERICA
NLS_NUMERIC_CHARACTERS .,
NLS_CHARACTERSET WE8ISO8859P1
NLS_CALENDAR GREGORIAN
NLS_DATE_FORMAT DD-MON-RR
NLS_DATE_LANGUAGE AMERICAN
NLS_SORT BINARY
NLS_TIME_FORMAT HH.MI.SSXFF AM
NLS_TIMESTAMP_FORMAT DD-MON-RR HH.MI.SSXFF AM
NLS_TIME_TZ_FORMAT HH.MI.SSXFF AM TZH:TZM
NLS_TIMESTAMP_TZ_FORMAT DD-MON-RR HH.MI.SSXFF AM TZH:TZM
NLS_DUAL_CURRENCY $
NLS_COMP BINARY
NLS_LENGTH_SEMANTICS BYTE
NLS_NCHAR_CONV_EXCP FALSE
NLS_RDBMS_VERSION 9.2.0.6.0
Client (windows server 2003, oracle client 10):
NLS_LANG = RUSSIAN_CIS.CL8MSWIN1251

N'<national symbols>', being part of an SQL statement, will be converted to the database character set (WE8ISO8859P1) before being parsed. Only if the client and the database are both 10.2 or higher, the client can encode the literal appropriately so that it survives this conversion.
In earlier versions, you can do the encoding yourself. Instead of the N'<national symbols>' literal use the UNISTR function: UNISTR('\xxxx\yyyy\zzzz'), where U+xxxx, U+yyyy, U+zzzz are Unicode code points of your national characters.
-- Sergiusz

Problem With Captivate 4 and Windows 8

Hi,
I've a problem with Captivate 4 on Windows 8 projects :
The mouse is not tracked.
I've applied the last patch for this version (11/15/2011).
Is there another patch for this ?
Thanks a lot.

Hi there
I know this will come off as sounding snarky, but please know it's honestly not intended that way,
Windows 8?
I never was able to make Captivate 4 run successfully on Windows 7. So I'm not the least bit surprised to hear it has issues with Windows 8!
Personally, I'm thinking you are due for an upgrade to Captivate if you want it to work on Windows 8. But then again, I'm not even certain if Captivate 6 is Windows 8 compatible.
Cheers... Rick
Helpful and Handy Links
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcerStone Blog
Captivate eBooks

Problems with captivate 8 and windows 8

I´m using captivate 8 and windows 8, and I am having problems with the visualization and publication of my projects. For visualization, there is a message of an error with syntax of the files ou directory, and nothing happens. For publication, I can´t see the project published in the browser. It opens only a text file, with the codes. Is there anyone thar can help me with that?

Acrobat 8 is not certified for Win7, particularly the x64 version. If you got the installation to go, the first step is to update AA8 to at least AA8.2. The x64 with XP required at least AA8.2 and I suspect that has not changed. I would suggest updating to the latest, either from the help menu (until no more updates are available) or by downloading the updates from the adobe.com>downloads page. For the latter, download ALL updates after your current version and install them in ORDER. They are not cummulative in most cases. You only need to reboot after the final update. The updates may get you going. If not, you may simply have to upgrade to AA9 or search for what others have been able to do in your situation.

Problems with Acrobat 8 and Windows 7 64 bit

Hi all
I need help with Acrobat 8 and Windows 7.
During the installation I'm asked to locate the file AdobePDF.dll on the disk. Selected the file in C:\Program Files (x86)\Adobe\Acrobat 8.0\Acrobat\Xtras\AdobePDF\AMD64.
The installation finishes without any other problem.
The problem arises when I want to create a pdf from a Word document. I'm using Office 2007. When I select he option to create a pdf from a file, I get message in the attached image.
If I try to used the Adobe PDF printer from within Word, nothing happes. The small printer icon apprears in the Windows task bar, but that is all. If I double click on the icon, I can see the print job, but that's all. There is no dialog box that asks me to save the file.
Assistance will be apppreciated.

Acrobat 8 is not certified for Win7, particularly the x64 version. If you got the installation to go, the first step is to update AA8 to at least AA8.2. The x64 with XP required at least AA8.2 and I suspect that has not changed. I would suggest updating to the latest, either from the help menu (until no more updates are available) or by downloading the updates from the adobe.com>downloads page. For the latter, download ALL updates after your current version and install them in ORDER. They are not cummulative in most cases. You only need to reboot after the final update. The updates may get you going. If not, you may simply have to upgrade to AA9 or search for what others have been able to do in your situation.

Flash Player 10, strange problem with emdedded fonts and movieclips

Hello, developers! I have a big problem with font embedding
and I can not debug it myself. So I need you help.
I' ve done a simple list of attached movieclips with
textfields inside them, with embedded fonts. I have no problem with
flash player 9 in order to see the list, but in flash player 10 I
can't see it. The font is very common, Arial actually so you can
test it very easily. I am using a font symbol in the library, a
class and an xml file for my data.
Also you can see it online in (if you have flash player 10
you can't see a thing)
http://www.forestonfire.com//research/flash/fontproblem/index.html
I have compiled the file as an exe projector in order to see
it as I do in flash player 9
http://www.forestonfire.com//research/flash/fontproblem/fontinflash9.zip
I have zipped also the source code in order to compile it
yourself.
http://www.forestonfire.com/research/flash/fontproblem/fontembedded.zip
and the same example without embedded fonts (I have the same
problem there so perchaps are not the fonts)
http://www.forestonfire.com/research/flash/fontproblem/fontnotembed.zip
Please, check it and tell me if there is a solution
available. Thank you in advance.

I've included also a much more simple example without the xml
and the font symbol, only the class and a movieclip from the
library, but I can't still see it on flash player 10
http://www.forestonfire.com/research/flash/fontproblem/simplyfied.zip
I have no clue about this problem.

Problems with mail server and clients

I have set up OS X server on my iMac with 2 MacBook Pros as clients. I have set up the server to be a mail server.
I have two problems.
1. I can successfully send and receive emails between the server and one MacBook Pro but neither send or receive mail on the other even though the settings are identical. I get the standard dialog box 'cannot connect using Port 25'.
2. On the MacBook Pro that will send mail I can also send mail out of the LAN but mail sent to me is bounced back to the sender.
Any help would be greatly appreciated. I am new to OS server my learning curve over the past week has been vertical!!!

You are not alone. I have started a current thread because of the same problem, http://discussions.apple.com/thread.jspa?threadID=1278072&tstart=0.
Another thread ended with the poster claiming to have things working after a clean install, but I have had no such luck with any of my installations so far.
Do you have only one domain on your server, or are you hosting virtual domains also?
/Lars

Problem (and resolution) with VI Server and Windows Firewall

I have recently implemented a version of the "Rendezvous" VI's that work over the network using the VI Server. Essentially, I wrote wrapper functions using "Call by Reference" for each of the VI's in the Rendezvous palate. I have an isolated subnetwork that all the machine are on (i.e. no internet, no DNS). The VI's work great on the local machine, or on networked machines when the Windows Firewall is turned off. However, when the Windows Firewall is on for the CLIENT machine, I get an error trying to access the VI Server on the Server machine. My understanding is that the windows firewall is inbound only? Regardless, I entered "exceptions" for all possible ports that LabVIEW should be using as listed in:
http://digital.ni.com/public.nsf/allkb/2ED134294484FB4E86257212005951DA
I'm running the VI Server on port 3362, so I also included that one. I included the exceptions on both the client and the server machine. I also made sure to include exceptions for the applications on both the client and the server machine. None of that made any difference: with the windows firewall on the client machine, it could not connect to the server machine with the VI Server.
Using the "netstat" command (windows xp). I was able to see that the host machine was trying to connect to the client machine on a port around 1044 (can't remember exactly). With each instance that the client tried to connect to the host, the host would increment the port by 1. i.e. 1044, 1045, 1046, etc....Just to test this out, I included and exceptions for three ports above 1046 on the client: 1047, 1048, 1049. The client could connect for these instances, but once it got to 1050, it gave me the connection error again. How in the world can you deal with this in the end application? no firewall?
Regardless, I found out another solution: include entries for all the client machines in the "hosts" file on the server machine.
This windows version of the "lmhosts" file resides at: [WINDOWS]\system32\drivers\etc
The "lmhosts.sam" file contains documentation on entries in the "hosts" file.
Incidentally, I also discovered that client entries in the "hosts" on the host machine drastically reduce timeouts associated with using the datasockets server on networks with no dedicated DNS. (I believe datasockets tries to do a reverse lookup and has to time out, with the hosts entry the lookup executes immediately)
Enjoy!

I have no entries in the "hosts" file on the client side. I only made entries to the "hosts" file on the server. That's the weird part! The client firewall blocks the connection unless the server has and entry for it in the "hosts" file!
I haven't really used the shared variable that much and haven't tried it. If I had to speculate, I would guess that it may affect it similarly. It did seem to have a positive effect in shortening the long duration timeouts that I was having with datasockets.

Problems with Outlook 2013 and Windows 8.1 with Exchange 2013

Hello Guys,
I just got started with testing Exchange 2013. My lab consists of 2 Exchange 2013 Servers, the Installation Media is the Exchange 2013 SP1 from MSDN, Server 2012 R2 and 2 Windows 8.1 Clients with Office 2013 SP 1 with all updates installed. I have configured
some mailboxes in Exchange and I want now to configure Outlook. So at the initial startup Outlook displays the correct Name and Mail Address. When I click next I make it to Logging on the mail server and then I am getting the Error : The connection to Microsoft
Exchange is unavailable. Your Network adapter does not have a default Gateway. All servers are in the network 192.168.5.0 /24. Any suggestions how can I fix this problem ?
Thank you

Hi there and thanks for Posting!
You can correct the issue by disabling outlook connection optimism.
Full details can be found from link below.
http://blogs.technet.com/b/rmilne/archive/2014/03/27/outlook-unable-to-connect-to-exchange-_1320_default-gateway-not-found.aspx
Happy Testing :)
Farhad

Still having problems with UAG SP4 and Windows 8.1

Hello,
This must be one of many threads on this topic but I'm stuck.
Because of the incompatibility with 8.1 and UAG2010 we've updated to SP4. Now, out-of-the-box 8.1 no longer wants to install the client components via ActiveX. I can log in, but the client isn't compliant so not all functions are available.
I actually had to manually get the client components from our UAG server. After installing I compared the System Information window with that of my 8.0 / IE10 installation and the only difference is that I can't see the version of the Device Session Cleanup
and SSL Application Tunneling gives me a "red X" in 8.0 and says "not detected" in 8.1. I did notice some .NET 3.5 components missing in 8.1 so I installed those too.
Compatibility mode does not help and switching to IE9 mode using the developer console is a workaround, not a solution.
What am I not seeing here?

Hi,
maybe the same problem we've faced:
http://social.technet.microsoft.com/Forums/forefront/en-US/2e8d916f-d694-42de-a96f-ad2b8761775c/no-activex-uag-client-install-golden-bar-on-ie11-after-upgrading-to-uag-sp4?forum=forefrontedgeiag
Regards,
Chris

[T410] discrete gfx - Problem with Video Card and Windows Aero -anyone using 4Gb memory modules?

[3/3/2010 Update]
There's a issue of using 4Gb sticks on T410 currently that results in video output artifacts and aero interface problems when using Lenovo supplied drivers v8.16.11.8825. I think I can call it confirmed (Three people including me face this issue).
Possible workaround is to install modified EliteBook 8440p video driver (read along this thread) comes with a BIG drawback of not being able to change brightness level within Windows 7. To sweeten it a little bit - you can set luminance level at POST screen, when computer boots up.
[Original Message]
Encountered strange behavoir of my T410.
I have a T410 with 256Mb of Video Memory and 1440x900 display, a T61 with 128Mb of Video Memory and 1400x1050 dsplay and external monitor HP w2338h with 1920x1080 resolution.
If I connect external monitor to my T410 and launch Visual Studio 2010 Beta 2 - image blinks and comes back with Aero disabled. Looking through event logs reveals the lack of memory. Entry information can be found further.
Now If I do the same with my old Thinkpad T61, connect the same monitor using the same cable - I can open as many Visual Studio 2010 Beta 2 instances I like (tried 5) and nothing blinks and Aero stays enabled.
Actually I find ridiculous, a notebook with more VRAM cannot archive the same performance as notebooks with less.
Does anyone know what path should I pursue to solve this issue?
UPDATE: Simply running multiple instances of Visual Studio 2010 Beta 2 without external monitor causes Aero disabled as well.
Log Name:      Application
Source:        Desktop Window Manager
Date:          2/4/2010 7:32:21 PM
Event ID:      9020
Task Category: None
Level:         Error
Keywords:      Classic
User:          N/A
Computer:
Description:
The Desktop Window Manager has encountered a fatal error (0x8007000e)
Error 2/4/2010 7:32:21 PM Desktop Window Manager 9020 None
Solved!
Go to Solution.

mat3y wrote:
I have the same problem with T410 and aero disabled. I am not using VS and I get this error anyway.
The Desktop Window Manager has encountered a fatal error (0x8007000e).
This must be buggy drivers, on Lenovo download site is just the one and the only initial driver for T410 graphics card.
What software were you actively using when this error occured?
Thinkpad T500-2081 CTO | T9400 2.53GHz | 8 GB RAM | ATI HD3650 + Intel GM45 | 15.4" LED WXGA+ | Windows 8 | ATI Catalyst 13.1 (non-switchable)
Thinkpad 390x | PII 333 | 256mb ram | NeoMagic 256AV | SVGA LCD | OS/2 v4.52

Problems with Active Directory and Windows 2003

Hello,
I'm using Mac OS X Server 10.4.9 with Active Directory bound to a Windows 2003 Active Directory Domain. I can bind successfully to the domain using the graphical interface. Then in Samba I can access shared directories using Windows users. However, after some time somehow there are problems and Windows users aren't authenticated anymore on the Mac. I've looked at the firewall and there are no denied packets from the Mac. There are two servers in the domain, all clocks are synchronized and domain information is up to date. When I unbind the Mac, I can see the machine account being deleted on both domain servers and created too on both machines when I bind to the domain.
Problems occur when I try login in using ssh or samba do I think this is a problem with the AD module.
I turned on debugging messages on DirectoryServices:
sudo killall -USR1 DirectoryService
When in Windows, using the Administrator user I try:
net use \\10.0.0.1 /user:domain\Administrator
Where 10.0.0.1 is the Mac.
In the Mac I get from
tail -f /Library/Logs/DirectoryService/DirectoryService.debug.log |grep ADPlug
2007-06-27 10:48:37 CDT - ADPlugin: Calling GetRecordList
2007-06-27 10:48:37 CDT - ADPlugin: 16784372 - Calling GetRecordList Routine
2007-06-27 10:48:37 CDT - ADPlugin: Search Records called in ADSWrapper
2007-06-27 10:48:37 CDT - ADPlugin: Searching attribute: dsAttrTypeStandard:RecordName
2007-06-27 10:48:37 CDT - ADPlugin: Searching domain domain.com.mx for User administrator
2007-06-27 10:48:37 CDT - ADPlugin: Failed getting credentials at line 2687 in ADSEngine.mm
2007-06-27 10:48:37 CDT - ADPlugin: Returning 0 Results
2007-06-27 10:48:37 CDT - ADPlugin: 16784372 - Put 0 records in Buffer for RecordList
2007-06-27 10:48:37 CDT - ADPlugin: Calling AttributeValueSearch
2007-06-27 10:48:37 CDT - ADPlugin: Search Records called in ADSWrapper
2007-06-27 10:48:37 CDT - ADPlugin: Searching attribute: dsAttrTypeStandard:RealName
2007-06-27 10:48:37 CDT - ADPlugin: Adding Search for Attribute displayName containing DOMAIN\administrator
2007-06-27 10:48:37 CDT - ADPlugin: Did DC search with queryFilter = (&(objectCategory=cn=person,cn=schema,cn=configuration,dc=domain,dc=com,dc=mx)( displayName=DOMAIN\\administrator)), limit 1
2007-06-27 10:48:37 CDT - ADPlugin: Failed getting credentials at line 2687 in ADSEngine.mm
2007-06-27 10:48:37 CDT - ADPlugin: 16784372 - Put 0 records in Buffer for AttributeValueSearch
2007-06-27 10:48:37 CDT - ADPlugin: Calling GetRecordList
2007-06-27 10:48:37 CDT - ADPlugin: 16784372 - Calling GetRecordList Routine
2007-06-27 10:48:37 CDT - ADPlugin: Search Records called in ADSWrapper
2007-06-27 10:48:37 CDT - ADPlugin: Searching attribute: dsAttrTypeStandard:RecordName
2007-06-27 10:48:37 CDT - ADPlugin: Searching domain domain.com.mx for User administrator
2007-06-27 10:48:37 CDT - ADPlugin: Failed getting credentials at line 2687 in ADSEngine.mm
2007-06-27 10:48:37 CDT - ADPlugin: Returning 0 Results
2007-06-27 10:48:37 CDT - ADPlugin: 16784372 - Put 0 records in Buffer for RecordList
2007-06-27 10:48:37 CDT - ADPlugin: Calling AttributeValueSearch
2007-06-27 10:48:37 CDT - ADPlugin: Search Records called in ADSWrapper
2007-06-27 10:48:37 CDT - ADPlugin: Searching attribute: dsAttrTypeStandard:RealName
2007-06-27 10:48:37 CDT - ADPlugin: Adding Search for Attribute displayName containing domain\administrator
2007-06-27 10:48:37 CDT - ADPlugin: Did DC search with queryFilter = (&(objectCategory=cn=person,cn=schema,cn=configuration,dc=domain,dc=com,dc=mx)( displayName=domain\\administrator)), limit 1
2007-06-27 10:48:37 CDT - ADPlugin: Failed getting credentials at line 2687 in ADSEngine.mm
2007-06-27 10:48:37 CDT - ADPlugin: 16784372 - Put 0 records in Buffer for AttributeValueSearch
2007-06-27 10:48:37 CDT - ADPlugin: Calling GetRecordList
2007-06-27 10:48:37 CDT - ADPlugin: 16784372 - Calling GetRecordList Routine
2007-06-27 10:48:37 CDT - ADPlugin: Search Records called in ADSWrapper
2007-06-27 10:48:37 CDT - ADPlugin: Searching attribute: dsAttrTypeStandard:RecordName
2007-06-27 10:48:37 CDT - ADPlugin: Searching domain domain.com.mx for User ADMINISTRATOR
2007-06-27 10:48:37 CDT - ADPlugin: Failed getting credentials at line 2687 in ADSEngine.mm
2007-06-27 10:48:37 CDT - ADPlugin: Returning 0 Results
2007-06-27 10:48:37 CDT - ADPlugin: 16784372 - Put 0 records in Buffer for RecordList
2007-06-27 10:48:37 CDT - ADPlugin: Calling AttributeValueSearch
2007-06-27 10:48:37 CDT - ADPlugin: Search Records called in ADSWrapper
2007-06-27 10:48:37 CDT - ADPlugin: Searching attribute: dsAttrTypeStandard:RealName
2007-06-27 10:48:37 CDT - ADPlugin: Adding Search for Attribute displayName containing domain\administrator
2007-06-27 10:48:37 CDT - ADPlugin: Did DC search with queryFilter = (&(objectCategory=cn=person,cn=schema,cn=configuration,dc=domain,dc=com,dc=mx)( displayName=DOMAIN\\ADMINISTRATOR)), limit 1
2007-06-27 10:48:37 CDT - ADPlugin: Failed getting credentials at line 2687 in ADSEngine.mm
2007-06-27 10:48:37 CDT - ADPlugin: 16784372 - Put 0 records in Buffer for AttributeValueSearch
2007-06-27 10:48:37 CDT - ADPlugin: Calling GetRecordList
2007-06-27 10:48:37 CDT - ADPlugin: 16784372 - Calling GetRecordList Routine
2007-06-27 10:48:37 CDT - ADPlugin: Search Records called in ADSWrapper
2007-06-27 10:48:37 CDT - ADPlugin: Searching attribute: dsAttrTypeStandard:RecordName
2007-06-27 10:48:37 CDT - ADPlugin: Locating User with Query (&(objectCategory=person)(|(cn=administrator)(sAMAccountName=administrator)(dis playName=administrator)(mail=administrator)(userPrincipalName=administrator)(use rPrincipalName=administrator@*)))
2007-06-27 10:48:37 CDT - ADPlugin: Failed getting credentials at line 2687 in ADSEngine.mm
2007-06-27 10:48:37 CDT - ADPlugin: Failed getting credentials at line 2687 in ADSEngine.mm
2007-06-27 10:48:37 CDT - ADPlugin: Returning 0 Results
2007-06-27 10:48:37 CDT - ADPlugin: 16784372 - Put 0 records in Buffer for RecordList
2007-06-27 10:48:37 CDT - ADPlugin: Calling AttributeValueSearch
2007-06-27 10:48:37 CDT - ADPlugin: Search Records called in ADSWrapper
2007-06-27 10:48:37 CDT - ADPlugin: Searching attribute: dsAttrTypeStandard:RealName
2007-06-27 10:48:37 CDT - ADPlugin: Adding Search for Attribute displayName containing ADMINISTRATOR
2007-06-27 10:48:37 CDT - ADPlugin: Did DC search with queryFilter = (&(objectCategory=cn=person,cn=schema,cn=configuration,dc=domain,dc=com,dc=mx)( displayName=administrator)), limit 1
2007-06-27 10:48:37 CDT - ADPlugin: Failed getting credentials at line 2687 in ADSEngine.mm
2007-06-27 10:48:37 CDT - ADPlugin: 16784372 - Put 0 records in Buffer for AttributeValueSearch
2007-06-27 10:48:37 CDT - ADPlugin: Calling GetRecordList
2007-06-27 10:48:37 CDT - ADPlugin: 16784372 - Calling GetRecordList Routine
2007-06-27 10:48:37 CDT - ADPlugin: Search Records called in ADSWrapper
2007-06-27 10:48:37 CDT - ADPlugin: Searching attribute: dsAttrTypeStandard:RecordName
2007-06-27 10:48:37 CDT - ADPlugin: Locating User with Query (&(objectCategory=person)(|(cn=ADMINISTRATOR)(sAMAccountName=ADMINISTRATOR)(dis playName=ADMINISTRATOR)(mail=ADMINISTRATOR)(userPrincipalName=ADMINISTRATOR)(use rPrincipalName=ADMINISTRATOR@*)))
2007-06-27 10:48:37 CDT - ADPlugin: Failed getting credentials at line 2687 in ADSEngine.mm
2007-06-27 10:48:38 CDT - ADPlugin: Failed getting credentials at line 2687 in ADSEngine.mm
2007-06-27 10:48:38 CDT - ADPlugin: Returning 0 Results
2007-06-27 10:48:38 CDT - ADPlugin: 16784372 - Put 0 records in Buffer for RecordList
2007-06-27 10:48:38 CDT - ADPlugin: Calling AttributeValueSearch
2007-06-27 10:48:38 CDT - ADPlugin: Search Records called in ADSWrapper
2007-06-27 10:48:38 CDT - ADPlugin: Searching attribute: dsAttrTypeStandard:RealName
2007-06-27 10:48:38 CDT - ADPlugin: Adding Search for Attribute displayName containing ADMINISTRATOR
2007-06-27 10:48:38 CDT - ADPlugin: Did DC search with queryFilter = (&(objectCategory=cn=person,cn=schema,cn=configuration,dc=domain,dc=com,dc=mx)( displayName=ADMINISTRATOR)), limit 1
2007-06-27 10:48:38 CDT - ADPlugin: Failed getting credentials at line 2687 in ADSEngine.mm
2007-06-27 10:48:38 CDT - ADPlugin: 16784372 - Put 0 records in Buffer for AttributeValueSearch
2007-06-27 10:48:38 CDT - ADPlugin: Calling GetRecordList
2007-06-27 10:48:38 CDT - ADPlugin: 16784372 - Calling GetRecordList Routine
2007-06-27 10:48:38 CDT - ADPlugin: Search Records called in ADSWrapper
2007-06-27 10:48:38 CDT - ADPlugin: Searching attribute: dsAttrTypeStandard:RecordName
2007-06-27 10:48:38 CDT - ADPlugin: Locating User with Query (&(objectCategory=person)(|(cn=administrator)(sAMAccountName=administrator)(dis playName=administrator)(mail=administrator)(userPrincipalName=administrator)(use rPrincipalName=administrator@*)))
2007-06-27 10:48:38 CDT - ADPlugin: Failed getting credentials at line 2687 in ADSEngine.mm
2007-06-27 10:48:38 CDT - ADPlugin: Failed getting credentials at line 2687 in ADSEngine.mm
2007-06-27 10:48:38 CDT - ADPlugin: Returning 0 Results
2007-06-27 10:48:38 CDT - ADPlugin: 16784372 - Put 0 records in Buffer for RecordList
2007-06-27 10:48:38 CDT - ADPlugin: Calling AttributeValueSearch
2007-06-27 10:48:38 CDT - ADPlugin: Search Records called in ADSWrapper
2007-06-27 10:48:38 CDT - ADPlugin: Searching attribute: dsAttrTypeStandard:RealName
2007-06-27 10:48:38 CDT - ADPlugin: Adding Search for Attribute displayName containing ADMINISTRATOR
2007-06-27 10:48:38 CDT - ADPlugin: Did DC search with queryFilter = (&(objectCategory=cn=person,cn=schema,cn=configuration,dc=domain,dc=com,dc=mx)( displayName=administrator)), limit 1
2007-06-27 10:48:38 CDT - ADPlugin: Failed getting credentials at line 2687 in ADSEngine.mm
2007-06-27 10:48:38 CDT - ADPlugin: 16784372 - Put 0 records in Buffer for AttributeValueSearch
2007-06-27 10:48:38 CDT - ADPlugin: Calling GetRecordList
2007-06-27 10:48:38 CDT - ADPlugin: 16784372 - Calling GetRecordList Routine
2007-06-27 10:48:38 CDT - ADPlugin: Search Records called in ADSWrapper
2007-06-27 10:48:38 CDT - ADPlugin: Searching attribute: dsAttrTypeStandard:RecordName
2007-06-27 10:48:38 CDT - ADPlugin: Locating User with Query (&(objectCategory=person)(|(cn=ADMINISTRATOR)(sAMAccountName=ADMINISTRATOR)(dis playName=ADMINISTRATOR)(mail=ADMINISTRATOR)(userPrincipalName=ADMINISTRATOR)(use rPrincipalName=ADMINISTRATOR@*)))
2007-06-27 10:48:38 CDT - ADPlugin: Failed getting credentials at line 2687 in ADSEngine.mm
2007-06-27 10:48:38 CDT - ADPlugin: Failed getting credentials at line 2687 in ADSEngine.mm
2007-06-27 10:48:38 CDT - ADPlugin: Returning 0 Results
2007-06-27 10:48:38 CDT - ADPlugin: 16784372 - Put 0 records in Buffer for RecordList
2007-06-27 10:48:38 CDT - ADPlugin: Calling AttributeValueSearch
2007-06-27 10:48:38 CDT - ADPlugin: Search Records called in ADSWrapper
2007-06-27 10:48:38 CDT - ADPlugin: Searching attribute: dsAttrTypeStandard:RealName
2007-06-27 10:48:38 CDT - ADPlugin: Adding Search for Attribute displayName containing ADMINISTRATOR
2007-06-27 10:48:38 CDT - ADPlugin: Did DC search with queryFilter = (&(objectCategory=cn=person,cn=schema,cn=configuration,dc=domain,dc=com,dc=mx)( displayName=ADMINISTRATOR)), limit 1
2007-06-27 10:48:38 CDT - ADPlugin: Failed getting credentials at line 2687 in ADSEngine.mm
2007-06-27 10:48:38 CDT - ADPlugin: 16784372 - Put 0 records in Buffer for AttributeValueSearch
2007-06-27 10:48:38 CDT - ADPlugin: Calling GetRecordList
2007-06-27 10:48:38 CDT - ADPlugin: 16784372 - Calling GetRecordList Routine
2007-06-27 10:48:38 CDT - ADPlugin: Search Records called in ADSWrapper
2007-06-27 10:48:38 CDT - ADPlugin: Searching attribute: dsAttrTypeStandard:RecordName
2007-06-27 10:48:38 CDT - ADPlugin: Searching domain domain.com.mx for User administrator
2007-06-27 10:48:38 CDT - ADPlugin: Failed getting credentials at line 2687 in ADSEngine.mm
2007-06-27 10:48:38 CDT - ADPlugin: Returning 0 Results
2007-06-27 10:48:38 CDT - ADPlugin: 16784372 - Put 0 records in Buffer for RecordList
2007-06-27 10:48:38 CDT - ADPlugin: Calling AttributeValueSearch
2007-06-27 10:48:38 CDT - ADPlugin: Search Records called in ADSWrapper
2007-06-27 10:48:38 CDT - ADPlugin: Searching attribute: dsAttrTypeStandard:RealName
2007-06-27 10:48:38 CDT - ADPlugin: Adding Search for Attribute displayName containing DOMAIN\administrator
2007-06-27 10:48:38 CDT - ADPlugin: Did DC search with queryFilter = (&(objectCategory=cn=person,cn=schema,cn=configuration,dc=domain,dc=com,dc=mx)( displayName=DOMAIN\\administrator)), limit 1
2007-06-27 10:48:38 CDT - ADPlugin: Failed getting credentials at line 2687 in ADSEngine.mm
2007-06-27 10:48:38 CDT - ADPlugin: 16784372 - Put 0 records in Buffer for AttributeValueSearch
2007-06-27 10:48:38 CDT - ADPlugin: Calling GetRecordList
2007-06-27 10:48:38 CDT - ADPlugin: 16784372 - Calling GetRecordList Routine
2007-06-27 10:48:38 CDT - ADPlugin: Search Records called in ADSWrapper
2007-06-27 10:48:38 CDT - ADPlugin: Searching attribute: dsAttrTypeStandard:RecordName
2007-06-27 10:48:38 CDT - ADPlugin: Searching domain domain.com.mx for User administrator
2007-06-27 10:48:38 CDT - ADPlugin: Failed getting credentials at line 2687 in ADSEngine.mm
2007-06-27 10:48:38 CDT - ADPlugin: Returning 0 Results
2007-06-27 10:48:38 CDT - ADPlugin: 16784372 - Put 0 records in Buffer for RecordList
2007-06-27 10:48:38 CDT - ADPlugin: Calling AttributeValueSearch
2007-06-27 10:48:38 CDT - ADPlugin: Search Records called in ADSWrapper
2007-06-27 10:48:38 CDT - ADPlugin: Searching attribute: dsAttrTypeStandard:RealName
2007-06-27 10:48:38 CDT - ADPlugin: Adding Search for Attribute displayName containing domain\administrator
2007-06-27 10:48:38 CDT - ADPlugin: Did DC search with queryFilter = (&(objectCategory=cn=person,cn=schema,cn=configuration,dc=domain,dc=com,dc=mx)( displayName=domain\\administrator)), limit 1
2007-06-27 10:48:38 CDT - ADPlugin: Failed getting credentials at line 2687 in ADSEngine.mm
2007-06-27 10:48:38 CDT - ADPlugin: 16784372 - Put 0 records in Buffer for AttributeValueSearch
2007-06-27 10:48:38 CDT - ADPlugin: Calling GetRecordList
2007-06-27 10:48:38 CDT - ADPlugin: 16784372 - Calling GetRecordList Routine
2007-06-27 10:48:38 CDT - ADPlugin: Search Records called in ADSWrapper
2007-06-27 10:48:38 CDT - ADPlugin: Searching attribute: dsAttrTypeStandard:RecordName
2007-06-27 10:48:38 CDT - ADPlugin: Searching domain domain.com.mx for User ADMINISTRATOR
2007-06-27 10:48:38 CDT - ADPlugin: Failed getting credentials at line 2687 in ADSEngine.mm
2007-06-27 10:48:38 CDT - ADPlugin: Returning 0 Results
2007-06-27 10:48:38 CDT - ADPlugin: 16784372 - Put 0 records in Buffer for RecordList
2007-06-27 10:48:38 CDT - ADPlugin: Calling AttributeValueSearch
2007-06-27 10:48:38 CDT - ADPlugin: Search Records called in ADSWrapper
2007-06-27 10:48:38 CDT - ADPlugin: Searching attribute: dsAttrTypeStandard:RealName
2007-06-27 10:48:38 CDT - ADPlugin: Adding Search for Attribute displayName containing DOMAIN\ADMINISTRATOR
2007-06-27 10:48:38 CDT - ADPlugin: Did DC search with queryFilter = (&(objectCategory=cn=person,cn=schema,cn=configuration,dc=domain,dc=com,dc=mx)( displayName=DOMAIN\\ADMINISTRATOR)), limit 1
2007-06-27 10:48:38 CDT - ADPlugin: Failed getting credentials at line 2687 in ADSEngine.mm
2007-06-27 10:48:38 CDT - ADPlugin: 16784372 - Put 0 records in Buffer for AttributeValueSearch
2007-06-27 10:48:38 CDT - ADPlugin: Calling GetRecordList
2007-06-27 10:48:38 CDT - ADPlugin: 16784372 - Calling GetRecordList Routine
2007-06-27 10:48:38 CDT - ADPlugin: Search Records called in ADSWrapper
2007-06-27 10:48:38 CDT - ADPlugin: Searching attribute: dsAttrTypeStandard:RecordName
2007-06-27 10:48:38 CDT - ADPlugin: Locating User with Query (&(objectCategory=person)(|(cn=administrator)(sAMAccountName=administrator)(dis playName=administrator)(mail=administrator)(userPrincipalName=administrator)(use rPrincipalName=administrator@*)))
2007-06-27 10:48:38 CDT - ADPlugin: Failed getting credentials at line 2687 in ADSEngine.mm
2007-06-27 10:48:38 CDT - ADPlugin: Failed getting credentials at line 2687 in ADSEngine.mm
2007-06-27 10:48:38 CDT - ADPlugin: Returning 0 Results
2007-06-27 10:48:38 CDT - ADPlugin: 16784372 - Put 0 records in Buffer for RecordList
2007-06-27 10:48:38 CDT - ADPlugin: Calling AttributeValueSearch
2007-06-27 10:48:38 CDT - ADPlugin: Search Records called in ADSWrapper
2007-06-27 10:48:38 CDT - ADPlugin: Searching attribute: dsAttrTypeStandard:RealName
2007-06-27 10:48:38 CDT - ADPlugin: Adding Search for Attribute displayName containing ADMINISTRATOR
2007-06-27 10:48:38 CDT - ADPlugin: Did DC search with queryFilter = (&(objectCategory=cn=person,cn=schema,cn=configuration,dc=domain,dc=com,dc=mx)( displayName=administrator)), limit 1
2007-06-27 10:48:38 CDT - ADPlugin: Failed getting credentials at line 2687 in ADSEngine.mm
2007-06-27 10:48:38 CDT - ADPlugin: 16784372 - Put 0 records in Buffer for AttributeValueSearch
2007-06-27 10:48:38 CDT - ADPlugin: Calling GetRecordList
2007-06-27 10:48:38 CDT - ADPlugin: 16784372 - Calling GetRecordList Routine
2007-06-27 10:48:38 CDT - ADPlugin: Search Records called in ADSWrapper
2007-06-27 10:48:38 CDT - ADPlugin: Searching attribute: dsAttrTypeStandard:RecordName
2007-06-27 10:48:38 CDT - ADPlugin: Locating User with Query (&(objectCategory=person)(|(cn=ADMINISTRATOR)(sAMAccountName=ADMINISTRATOR)(dis playName=ADMINISTRATOR)(mail=ADMINISTRATOR)(userPrincipalName=ADMINISTRATOR)(use rPrincipalName=ADMINISTRATOR@*)))
2007-06-27 10:48:38 CDT - ADPlugin: Failed getting credentials at line 2687 in ADSEngine.mm
2007-06-27 10:48:38 CDT - ADPlugin: Failed getting credentials at line 2687 in ADSEngine.mm
2007-06-27 10:48:38 CDT - ADPlugin: Returning 0 Results
2007-06-27 10:48:38 CDT - ADPlugin: 16784372 - Put 0 records in Buffer for RecordList
2007-06-27 10:48:38 CDT - ADPlugin: Calling AttributeValueSearch
2007-06-27 10:48:38 CDT - ADPlugin: Search Records called in ADSWrapper
2007-06-27 10:48:38 CDT - ADPlugin: Searching attribute: dsAttrTypeStandard:RealName
2007-06-27 10:48:38 CDT - ADPlugin: Adding Search for Attribute displayName containing ADMINISTRATOR
2007-06-27 10:48:38 CDT - ADPlugin: Did DC search with queryFilter = (&(objectCategory=cn=person,cn=schema,cn=configuration,dc=domain,dc=com,dc=mx)( displayName=ADMINISTRATOR)), limit 1
2007-06-27 10:48:38 CDT - ADPlugin: Failed getting credentials at line 2687 in ADSEngine.mm
2007-06-27 10:48:38 CDT - ADPlugin: 16784372 - Put 0 records in Buffer for AttributeValueSearch
2007-06-27 10:48:38 CDT - ADPlugin: Calling GetRecordList
2007-06-27 10:48:38 CDT - ADPlugin: 16784372 - Calling GetRecordList Routine
2007-06-27 10:48:38 CDT - ADPlugin: Search Records called in ADSWrapper
2007-06-27 10:48:38 CDT - ADPlugin: Searching attribute: dsAttrTypeStandard:RecordName
2007-06-27 10:48:38 CDT - ADPlugin: Locating User with Query (&(objectCategory=person)(|(cn=administrator)(sAMAccountName=administrator)(dis playName=administrator)(mail=administrator)(userPrincipalName=administrator)(use rPrincipalName=administrator@*)))
2007-06-27 10:48:38 CDT - ADPlugin: Failed getting credentials at line 2687 in ADSEngine.mm
2007-06-27 10:48:38 CDT - ADPlugin: Failed getting credentials at line 2687 in ADSEngine.mm
2007-06-27 10:48:38 CDT - ADPlugin: Returning 0 Results
2007-06-27 10:48:38 CDT - ADPlugin: 16784372 - Put 0 records in Buffer for RecordList
2007-06-27 10:48:38 CDT - ADPlugin: Calling AttributeValueSearch
2007-06-27 10:48:38 CDT - ADPlugin: Search Records called in ADSWrapper
2007-06-27 10:48:38 CDT - ADPlugin: Searching attribute: dsAttrTypeStandard:RealName
2007-06-27 10:48:38 CDT - ADPlugin: Adding Search for Attribute displayName containing ADMINISTRATOR
2007-06-27 10:48:38 CDT - ADPlugin: Did DC search with queryFilter = (&(objectCategory=cn=person,cn=schema,cn=configuration,dc=domain,dc=com,dc=mx)( displayName=administrator)), limit 1
2007-06-27 10:48:38 CDT - ADPlugin: Failed getting credentials at line 2687 in ADSEngine.mm
2007-06-27 10:48:38 CDT - ADPlugin: 16784372 - Put 0 records in Buffer for AttributeValueSearch
2007-06-27 10:48:38 CDT - ADPlugin: Calling GetRecordList
2007-06-27 10:48:38 CDT - ADPlugin: 16784372 - Calling GetRecordList Routine
2007-06-27 10:48:38 CDT - ADPlugin: Search Records called in ADSWrapper
2007-06-27 10:48:38 CDT - ADPlugin: Searching attribute: dsAttrTypeStandard:RecordName
2007-06-27 10:48:38 CDT - ADPlugin: Locating User with Query (&(objectCategory=person)(|(cn=ADMINISTRATOR)(sAMAccountName=ADMINISTRATOR)(dis playName=ADMINISTRATOR)(mail=ADMINISTRATOR)(userPrincipalName=ADMINISTRATOR)(use rPrincipalName=ADMINISTRATOR@*)))
2007-06-27 10:48:38 CDT - ADPlugin: Failed getting credentials at line 2687 in ADSEngine.mm
2007-06-27 10:48:38 CDT - ADPlugin: Failed getting credentials at line 2687 in ADSEngine.mm
2007-06-27 10:48:38 CDT - ADPlugin: Returning 0 Results
2007-06-27 10:48:38 CDT - ADPlugin: 16784372 - Put 0 records in Buffer for RecordList
2007-06-27 10:48:38 CDT - ADPlugin: Calling AttributeValueSearch
2007-06-27 10:48:38 CDT - ADPlugin: Search Records called in ADSWrapper
2007-06-27 10:48:38 CDT - ADPlugin: Searching attribute: dsAttrTypeStandard:RealName
2007-06-27 10:48:38 CDT - ADPlugin: Adding Search for Attribute displayName containing ADMINISTRATOR
2007-06-27 10:48:38 CDT - ADPlugin: Did DC search with queryFilter = (&(objectCategory=cn=person,cn=schema,cn=configuration,dc=domain,dc=com,dc=mx)( displayName=ADMINISTRATOR)), limit 1
2007-06-27 10:48:38 CDT - ADPlugin: Failed getting credentials at line 2687 in ADSEngine.mm
2007-06-27 10:48:38 CDT - ADPlugin: 16784372 - Put 0 records in Buffer for AttributeValueSearch
2007-06-27 10:48:38 CDT - ADPlugin: Calling OpenDirNode
2007-06-27 10:48:38 CDT - ADPlugin: Opening Specific Node domain.com.mx
2007-06-27 10:48:38 CDT - ADPlugin: Calling GetRecordList
2007-06-27 10:48:38 CDT - ADPlugin: 16833877 - Calling GetRecordList Routine
2007-06-27 10:48:38 CDT - ADPlugin: Search Records called in ADSWrapper
2007-06-27 10:48:38 CDT - ADPlugin: Searching attribute: dsAttrTypeStandard:RecordName
2007-06-27 10:48:38 CDT - ADPlugin: Locating User with Query (&(objectCategory=person)(|(cn=administrator)(sAMAccountName=administrator)(dis playName=administrator)(mail=administrator)(userPrincipalName=administrator)(use rPrincipalName=administrator@*)))
2007-06-27 10:48:38 CDT - ADPlugin: Failed getting credentials at line 2687 in ADSEngine.mm
2007-06-27 10:48:38 CDT - ADPlugin: Failed getting credentials at line 2687 in ADSEngine.mm
2007-06-27 10:48:38 CDT - ADPlugin: Returning 0 Results
2007-06-27 10:48:38 CDT - ADPlugin: 16833877 - Put 0 records in Buffer for RecordList
2007-06-27 10:48:38 CDT - ADPlugin: Calling CloseDirNode
2007-06-27 10:48:42 CDT - ADPlugin: Calling OpenDirNode
2007-06-27 10:48:43 CDT - ADPlugin: Opening Specific Node domain.com.mx
2007-06-27 10:48:43 CDT - ADPlugin: Calling GetRecordList
2007-06-27 10:48:43 CDT - ADPlugin: 16833881 - Calling GetRecordList Routine
2007-06-27 10:48:43 CDT - ADPlugin: Search Records called in ADSWrapper
2007-06-27 10:48:43 CDT - ADPlugin: Searching attribute: dsAttrTypeStandard:RecordName
2007-06-27 10:48:43 CDT - ADPlugin: Locating User with Query (&(objectCategory=person)(|(cn=administrator)(sAMAccountName=administrator)(dis playName=administrator)(mail=administrator)(userPrincipalName=administrator)(use rPrincipalName=administrator@*)))
2007-06-27 10:48:43 CDT - ADPlugin: Failed getting credentials at line 2687 in ADSEngine.mm
2007-06-27 10:48:43 CDT - ADPlugin: Failed getting credentials at line 2687 in ADSEngine.mm
2007-06-27 10:48:43 CDT - ADPlugin: Returning 0 Results
2007-06-27 10:48:43 CDT - ADPlugin: 16833881 - Put 0 records in Buffer for RecordList
2007-06-27 10:48:43 CDT - ADPlugin: Calling CloseDirNode
I really don't know what to do. The Windows Event log shows no messages. The link used to work and there have been no changes in the domain servers.
The key line seems to be:
2007-06-27 10:48:43 CDT - ADPlugin: Failed getting credentials at line 2687 in ADSEngine.mm
But I don't know what that ADSEngine.mm is.
XServe G5 Mac OS X (10.4.9)

Hello.
Thanks for your reply.
I tried the net use with a drive letter with and without the /user switch. When I use a domain user domain\user1 I can't connect. When I use a user local to the XServe it works.
When I use
net use x: \\10.0.0.1\share /user:domain\user1
I get prompted for a password, but it doesn't work.
I checked the firewall and all packets to or from the mac are accepted, no denied or dropped packages.
I already went through the MS document on fw ports. Before I opened to Kerberos ports the binding failed. No the binding work OK.
Some users who were authenticated yesterday still can access files using the Windows domain accounts. It's new users trying to connect those who have problems.
This is what the Samba log.smbd log shows:
[2007/07/04 14:58:45, 2] /SourceCache/samba/samba-100.7/samba/source/smbd/sesssetup.c:setupnew_vcsession(662)
setupnew_vcsession: New VC == 0, if NT4.x compatible we would close all old resources.
[2007/07/04 14:58:45, 2] /SourceCache/samba/samba-100.7/samba/source/smbd/sesssetup.c:setupnew_vcsession(662)
setupnew_vcsession: New VC == 0, if NT4.x compatible we would close all old resources.
[2007/07/04 14:58:46, 0] /SourceCache/samba/samba-100.7/samba/source/auth/authutil.c:make_server_infoinfo3(1138)
makeserver_infoinfo3: pdbinitsam failed!
[2007/07/04 14:58:46, 0] pdbods.c:odssamgetsampwnam(2329)
odssam_getsampwnam: [0]getsam_recordattributes dsRecTypeStandard:Users no account for 'user1'!
[2007/07/04 14:58:46, 2] /SourceCache/samba/samba-100.7/samba/source/auth/auth.c:checkntlmpassword(367)
checkntlmpassword: Authentication for user [user1] -> [user1] FAILED with error NTSTATUS_NO_SUCHUSER
This is what the DS log shows:
2007-07-04 14:58:46 CDT - ADPlugin: 16892201 - Calling GetRecordList Routine
2007-07-04 14:58:46 CDT - ADPlugin: Search Records called in ADSWrapper
2007-07-04 14:58:46 CDT - ADPlugin: Searching attribute: dsAttrTypeStandard:RecordName
2007-07-04 14:58:46 CDT - ADPlugin: Locating User with Query (&(objectCategory=person)(|(cn=user1)(sAMAccountName=user1)(displayName=user1)( mail=user1)(userPrincipalName=user1)(userPrincipalName=user1@*)))
2007-07-04 14:58:46 CDT - ADPlugin: Failed getting credentials at line 2687 in ADSEngine.mm
2007-07-04 14:58:46 CDT - ADPlugin: Failed getting credentials at line 2687 in ADSEngine.mm
2007-07-04 14:58:46 CDT - ADPlugin: Returning 0 Results
2007-07-04 14:58:46 CDT - ADPlugin: 16892201 - Put 0 records in Buffer for RecordList
XServe G5 Mac OS X (10.4.9)

Please help! Strange problem with HTTPD.Conf and OC4J (I think)

Hi,
We have been trying to configure the 10g "infrastructure" Apache server/instance to work with our own authentication module, and as part of this, we need to configure a directory alias containing some of our JSPs. To do this, the only thing that we did was that we took the standard HTTPD.CONF file that got installed with the 10g AS installation, and added a small section at the end.
However, we are finding that if our addition to the HTTPD.CONF is included, instead of the JSPs in our aliased directory being processed, Apache seems to be just serving the JSPs as text pages :(..
If we remove the section at the end of the HTTPD.CONF, and point a browser to the unaliased path, the JSPs get processed correctly.
I was wondering if anyone here might take a look at our HTTPD.CONF below, and tell me if you can see something there that might be causing this behavior? The section that we added is at the very end. We think that the problem might be something like the "order" of the directives, etc. in the HTTPD.CONF file may be such that the alias is taking priority ahead of the OC4J, or something like that.
Thanks in advance, and apologies for the long message.
Jim
=====================================================
ServerType standalone
ServerRoot "/orad59/10gAS/infrastructure/Apache/Apache"
PidFile /orad59/10gAS/infrastructure/Apache/Apache/logs/httpd.pid
ScoreBoardFile /orad59/10gAS/infrastructure/Apache/Apache/logs/httpd.scoreboard
Timeout 300
KeepAlive On
MaxKeepAliveRequests 100
KeepAliveTimeout 15
MinSpareServers 5
MaxSpareServers 20
StartServers 5
MaxClients 150
MaxRequestsPerChild 0
LoadModule onsint_module libexec/mod_onsint.so
LoadModule mmap_static_module libexec/mod_mmap_static.so
LoadModule vhost_alias_module libexec/mod_vhost_alias.so
LoadModule env_module libexec/mod_env.so
LoadModule define_module libexec/mod_define.so
LoadModule config_log_module libexec/mod_log_config.so
LoadModule agent_log_module libexec/mod_log_agent.so
LoadModule referer_log_module libexec/mod_log_referer.so
LoadModule mime_magic_module libexec/mod_mime_magic.so
LoadModule mime_module libexec/mod_mime.so
LoadModule negotiation_module libexec/mod_negotiation.so
LoadModule status_module libexec/mod_status.so
LoadModule info_module libexec/mod_info.so
LoadModule includes_module libexec/mod_include.so
LoadModule autoindex_module libexec/mod_autoindex.so
LoadModule dir_module libexec/mod_dir.so
LoadModule cgi_module libexec/mod_cgi.so
LoadModule asis_module libexec/mod_asis.so
LoadModule imap_module libexec/mod_imap.so
LoadModule action_module libexec/mod_actions.so
LoadModule speling_module libexec/mod_speling.so
LoadModule userdir_module libexec/mod_userdir.so
LoadModule alias_module libexec/mod_alias.so
LoadModule access_module libexec/mod_access.so
LoadModule auth_module libexec/mod_auth.so
LoadModule anon_auth_module libexec/mod_auth_anon.so
LoadModule dbm_auth_module libexec/mod_auth_dbm.so
LoadModule digest_module libexec/mod_digest.so
LoadModule proxy_module libexec/libproxy.so
LoadModule cern_meta_module libexec/mod_cern_meta.so
LoadModule expires_module libexec/mod_expires.so
LoadModule headers_module libexec/mod_headers.so
LoadModule usertrack_module libexec/mod_usertrack.so
LoadModule unique_id_module libexec/mod_unique_id.so
LoadModule setenvif_module libexec/mod_setenvif.so
LoadModule perl_module libexec/libperl.so
LoadModule fastcgi_module libexec/mod_fastcgi.so
<IfDefine SSL>
LoadModule ossl_module libexec/mod_ossl.so
</IfDefine>
LoadModule wchandshake_module libexec/mod_wchandshake.so
ExtendedStatus On
Port 7777
Listen 7777
User oracle
Group dba
ServerAdmin [email protected]
ServerName ge1ssd04.test.com
DocumentRoot "/orad59/10gAS/infrastructure/Apache/Apache/htdocs"
<Directory />
Options FollowSymLinks MultiViews
AllowOverride None
</Directory>
<Directory "/orad59/10gAS/infrastructure/Apache/Apache/htdocs">
Options Indexes FollowSymLinks MultiViews
AllowOverride None
Order allow,deny
Allow from all
</Directory>
<IfModule mod_userdir.c>
UserDir public_html
</IfModule>
<IfModule mod_dir.c>
DirectoryIndex index.html
</IfModule>
AccessFileName .htaccess
<Files ~ "^\.ht">
Order allow,deny
Deny from all
</Files>
UseCanonicalName On
<IfModule mod_mime.c>
TypesConfig /orad59/10gAS/infrastructure/Apache/Apache/conf/mime.types
AddEncoding x-compress Z
AddEncoding x-gzip gz tgz
AddLanguage ar .ar
AddLanguage da .dk .da
AddLanguage nl .nl
AddLanguage en .en
AddLanguage et .ee
AddLanguage fi .fi
AddLanguage fr .fr
AddLanguage de .de
AddLanguage el .el
AddLanguage es .es_ES .es
AddLanguage he .he .iw
AddLanguage hu .hu
AddCharset ISO-8859-8 .iso8859-8
AddLanguage it .it
AddLanguage ja .ja
AddCharset ISO-2022-JP .jis
AddLanguage ko .ko
AddLanguage kr .kr
AddCharset ISO-2022-KR .iso-kr
AddLanguage nn .nn
AddLanguage no .no
AddLanguage pl .po
AddCharset ISO-8859-2 .iso-pl
AddLanguage pt .pt
AddLanguage pt-br .pt_BR .pt-br
AddLanguage ltz .lu
AddLanguage ca .ca
AddLanguage sk .sk
AddLanguage sv .sv
AddLanguage th .th
AddLanguage tr .tr
AddLanguage cz .cz .cs
AddLanguage ro .ro
AddLanguage ru .ru
AddLanguage zh-cn .zh_CN
AddLanguage zh-tw .zh_TW
AddCharset Big5 .Big5 .big5
AddCharset WINDOWS-1251 .cp-1251
AddCharset CP866 .cp866
AddCharset ISO-8859-5 .iso-ru
AddCharset KOI8-R .koi8-r
AddCharset UCS-2 .ucs2
AddCharset UCS-4 .ucs4
AddCharset UTF-8 .utf8
<IfModule mod_negotiation.c>
LanguagePriority ar en da nl et fi fr de el it ja ko kr no pl pt pt-br ro ru ltz ca es sk sv th tr zh-cn zh-tw zh-cn
</IfModule>
AddType application/x-tar .tgz
</IfModule>
DefaultType text/plain
<IfModule mod_mime_magic.c>
MIMEMagicFile /orad59/10gAS/infrastructure/Apache/Apache/conf/magic
</IfModule>
HostnameLookups Off
ErrorLog "|/orad59/10gAS/infrastructure/Apache/Apache/bin/rotatelogs /orad59/10gAS/infrastructure/Apache/Apache/logs/error_log 43200"
LogLevel warn
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
LogFormat "%h %l %u %t \"%r\" %>s %b" common
LogFormat "%{Referer}i -> %U" referer
LogFormat "%{User-agent}i" agent
CustomLog "|/orad59/10gAS/infrastructure/Apache/Apache/bin/rotatelogs /orad59/10gAS/infrastructure/Apache/Apache/logs/access_log 43200" common
ServerSignature On
<IfModule mod_alias.c>
Alias /icons/ "/orad59/10gAS/infrastructure/Apache/Apache/icons/"
Alias /jservdocs/ "/orad59/10gAS/infrastructure/Apache/Jserv/docs/"
Alias /javacachedocs/ "/orad59/10gAS/infrastructure/javacache/javadoc/"
<IfModule mod_perl.c>
Alias /perl/ "/orad59/10gAS/infrastructure/Apache/Apache/cgi-bin/"
</IfModule>
<Directory "/orad59/10gAS/infrastructure/Apache/Apache/icons">
Options Indexes MultiViews
AllowOverride None
Order allow,deny
Allow from all
</Directory>
ScriptAlias /cgi-bin/ "/orad59/10gAS/infrastructure/Apache/Apache/cgi-bin/"
<Directory "/orad59/10gAS/infrastructure/Apache/Apache/cgi-bin">
AllowOverride None
Options None
Order allow,deny
Allow from all
</Directory>
</IfModule>
<IfModule mod_autoindex.c>
IndexOptions FancyIndexing
AddIconByEncoding (CMP,/icons/compressed.gif) x-compress x-gzip
AddIconByType (TXT,/icons/text.gif) text/*
AddIconByType (IMG,/icons/image2.gif) image/*
AddIconByType (SND,/icons/sound2.gif) audio/*
AddIconByType (VID,/icons/movie.gif) video/*
AddIcon /icons/binary.gif .bin .exe
AddIcon /icons/binhex.gif .hqx
AddIcon /icons/tar.gif .tar
AddIcon /icons/world2.gif .wrl .wrl.gz .vrml .vrm .iv
AddIcon /icons/compressed.gif .Z .z .tgz .gz .zip
AddIcon /icons/a.gif .ps .ai .eps
AddIcon /icons/layout.gif .html .shtml .htm .pdf
AddIcon /icons/text.gif .txt
AddIcon /icons/c.gif .c
AddIcon /icons/p.gif .pl .py
AddIcon /icons/f.gif .for
AddIcon /icons/dvi.gif .dvi
AddIcon /icons/uuencoded.gif .uu
AddIcon /icons/script.gif .conf .sh .shar .csh .ksh .tcl
AddIcon /icons/tex.gif .tex
AddIcon /icons/bomb.gif core
AddIcon /icons/back.gif ..
AddIcon /icons/hand.right.gif README
AddIcon /icons/folder.gif ^^DIRECTORY^^
AddIcon /icons/blank.gif ^^BLANKICON^^
ReadmeName README
HeaderName HEADER
IndexIgnore .??* *~ *# HEADER* README* RCS CVS *,v *,t
</IfModule>
<IfModule mod_setenvif.c>
BrowserMatch "Mozilla/2" nokeepalive
BrowserMatch "MSIE 4\.0b2;" nokeepalive downgrade-1.0 force-response-1.0
BrowserMatch "RealPlayer 4\.0" force-response-1.0
BrowserMatch "Java/1\.0" force-response-1.0
BrowserMatch "JDK/1\.0" force-response-1.0
</IfModule>
<Location /server-status>
SetHandler server-status
Order deny,allow
Deny from all
Allow from localhost ge1ssd04.test.com ge1ssd04
</Location>
SetEnv PERL5LIB "/orad59/10gAS/infrastructure/perl/lib/5.6.1:/orad59/10gAS/infrastructure/perl/lib/site_perl/5.6.1"
<IfModule mod_perl.c>
PerlModule Apache
PerlModule Apache::Registry
<Location /perl>
SetHandler perl-script
PerlHandler Apache::Registry
AddHandler perl-script .pl
Options +ExecCGI
PerlSendHeader On
</Location>
</IfModule>
<DirectoryMatch /WEB-INF/>
Order deny,allow
Deny from all
</DirectoryMatch>
<IfModule mod_fastcgi.c>
Alias /fastcgi/ "/orad59/10gAS/infrastructure/Apache/fastcgi/"
ScriptAlias /fcgi-bin/ "/orad59/10gAS/infrastructure/Apache/Apache/fcgi-bin/"
<Directory "/orad59/10gAS/infrastructure/Apache/Apache/fcgi-bin">
AllowOverride None
Options None
Order allow,deny
Allow from all
SetHandler fastcgi-script
<IfModule mod_ossl.c>
SSLOptions +StdEnvVars
</IfModule>
</Directory>
</IfModule>
PassEnv ORACLE_HOME
PassEnv LD_LIBRARY_PATH
PassEnv NLS_LANG
PassEnv TNS_ADMIN
<IfModule mod_oprocmgr.c>
<Location /oprocmgr-service>
SetHandler oprocmgr-service
Order deny,allow
Deny from all
Allow from localhost ge1ssd04.test.com ge1ssd04
</Location>
<Location /oprocmgr-status>
SetHandler oprocmgr-status
Order deny,allow
Deny from all
Allow from localhost ge1ssd04.test.com ge1ssd04
</Location>
</IfModule>
include "/orad59/10gAS/infrastructure/Apache/Apache/conf/mod_oc4j.conf"
include "/orad59/10gAS/infrastructure/Apache/Apache/conf/dms.conf"
LoadModule rewrite_module libexec/mod_rewrite.so
include "/orad59/10gAS/infrastructure/Apache/Apache/conf/ssl.conf"
include "/orad59/10gAS/infrastructure/Apache/Apache/conf/mod_osso.conf"
include "/orad59/10gAS/infrastructure/Apache/Apache/conf/oracle_apache.conf"
# MY ADDITIONS TO HTTPD.CONF GO BELOW HERE....
LoadModule my_auth_module /opt/myagent/apache/lib/libmy_apache_agent_mod_ssl.so
AddModule my_apache_mod.c
<IfModule my_apache_mod.c>
MYAgentRoot /opt/myagent/apache
</IfModule>
<IfModule my_apache_mod.c>
<Location />
AuthType Basic
Require valid-user
AuthName MYAUTH
</Location>
</IfModule>
<IfModule my_apache_mod.c>
Alias /mydir/ "/orad59/10gAS/infrastructure/j2ee/OC4J_SECURITY/applications/sso/web/jsp/myagentdir/"
<Directory "/orad59/10gAS/infrastructure/j2ee/OC4J_SECURITY/applications/sso/web/jsp/myagentdir/">
AuthType Basic
Require valid-user
AuthName MYAUTH
</Directory>
</IfModule>

Hi,
I wanted to post what we found on this.
As indicated in my original msg, we had an Alias directory in the httpd.conf. However, after thinking about the problem a bit, I think that the Alias was not the right thing to do.
The Alias tells Apache to map a URL fragment to a FILESYSTEM location. Well, obviously, Apache only SERVES pages... it doesn't process JSPs.
We switched to using a Redirect directive instead of the Alias, and things worked a little better, but we've run into a bit of a problem with "Redirect looping", but that's a different story :)...
Jim

Strange problem with AIX server and windows clients

Similar Messages

Maybe you are looking for