Strange problem with CachedRowSet

Hi, I got I an strange problem, I got two CachedRowSet in two different classes, it works without problem, but now I need to create more classes that will receive a RowSet, but the problem is that it don't execute, I got a NullPointerException, but when I get this code and put it in the class that works the Cached is executed and the data is displayed right.
I don't know what's wrong cause the classes are equal, the only difference is the query.
I tried renaming the beans, but it still doesn't work.
Help me, please.
Thanks.

Suggest to check the server.log for the stack trace of the Null pointer exception.
If this doesn't help find the problem then try debugging the application by setting a breakpoint where the Null pointer occurs and check the local variables and/or set some watches.
If still no avail, you can post the Null pointer stack trace here
John

Similar Messages

Strange Problems With Display and Permissions Since 10.5.1 update.

Since I've done the 10.5.1 update I have been having a strange problem with my desktop and dock displays. On my desktop I have these strange lines that appear any time I log in or open any application, the lines never go away and change locations on the screen once I open an application or move a window. My dock has the reflective shelf for about half of it, the rest is a dull grey. I've also had problems with verifying and repairing my permissions. I can never actually complete either permissions task. I've used some third party apps, they always fail as well. The only time I can actually repair my permissions is by booting in to single user mode and doing a fsck -f command. When I boot back in to Leopard and try to use the Disk Utility to repair, it continues to fail.
I'm not sure if the video problem I am having stems from a permissions issue or possibly a corrupt video driver. Either way, I've done a lot research and haven't found anyone with the same problems I have been having so I thought I would give these forums a shot.
I am using a PowerMac G4 Quicksilver with dual 800Mhz, 1.5gb RAM, and a GeForce4 Ti 4600 128mb video card.
Here is a screen shot of the line and dock problem.
Here is a screen shot of my "About This Mac.
If anyone could lend some light on this issue, I would greatly appreciate it.
Thanks
Jeff

you can pile it on this: http://discussions.apple.com/thread.jspa?threadID=1246649&tstart=0
btw - no solution yet.

Strange problem with Adobe Acrobat X (crash without a trace)

Hi,
I have a strange problem with Adobe Acrobat. It happens totally randomly, it leaves no signs in system logs.
What is happening: during my work Adobe Acrobat sudennly crashes. After a crash I cannot run it again - system seems to do something for a second, but then nothing happends. When i look into taks manager - there are no processes of Acrobat.exe. It just doesn't want to run. What I need to do is to reinstall whole Adobe Acrobat - which requires restart.
I've already tried to restart system after crash, it doesn't help - reinstall is required.
Sometimes everyting is fine for a 3 months, sometimes crash happens a week after the previous one. It also happens in very different situations (somtimes while opening a file, sometimes when doing something simple, sometimes in more complex tasks).
Has anyone encountered a similar problem?
Acrobat version: 10.1.1
System info: Windows 7 64 bit

Hi Kelvin,
Please let me know what OS version you are using.
The error also shows OS requirements not met.
Futher please try the steps below :
> Enable the hidden Admin Account on Windows 7 ( Ref : http://www.howtogeek.com/howto/windows-vista/enable-the-hidden-administrator-account-on-wi ndows-vista/ )
> Disable all Non-Microsoft Startup Services. (Ref : http://helpx.adobe.com/x-productkb/global/disable-startup-items-services-windows.html )
> Disable all the Antivirus softwares like CA, Norton,Mc Afee etc. temporarily from the computer.
Reboot and try installing in the new enabled Admin user account and check.
Please refer the Kb Doc : http://helpx.adobe.com/creative-suite/kb/error-exit-6-exit-7.html.
Also see Troubleshoot with install logs | CS5, CS5.5, CS6 - http://helpx.adobe.com/creative-suite/kb/troubleshoot-install-logs-cs5-cs5.html for information on how to review your installation logs
Regards,
Rave

Strange problem with Subviews on 1.0 Beta

Hi,
I'm having a strange problem with SubViews on 1.0 Beta. I'm not sure If I'm being stupid and have done something wrong, or if there's a problem here.
My application is directly based on one of the examples, so the structure etc is almost identical. I've simplified the files below to avoid confusing the issue.
The default landing page (greeting.jsp) looks like this:
<%@ taglib declarations for HTML and CORE taglibs %>
<HTML>
<HEAD><title>Insulation Layer Demo</title></HEAD>
<body bgcolor="white">
<f:view>
<jsp:include page="sysstatus.jsp" />

</f:view>
</body>
</HTML>
sysstatus.jsp looks like this:
<%@ taglib declarations for HTML and CORE taglibs %>
<f:subview id="SystemStatusView">
<h:form id="systemStatusForm">
<h:selectboolean_checkbox id="System1Available" value="#{SystemStatus.system1Available}"/>System 1 
<h:selectboolean_checkbox id="System2Available" value="#{SystemStatus.system2Available}"/>System 2
<h:command_button id="submit" action="success" value="submit" />
</h:form>
</f:subview>When I view this page, the checkboxes all seem to work okay (in that their state is preserved across calls etc), but the formatting is very screwy. The resulting page looks something like:
<chkbox1> <chkbox2> <Submit>
System 1
System 2
<Other HTML content from greeting.jsp>When I look at the HTML source code being generated, it is genuinly being generated as above, that is, all the form tags first, and then the rest of the content. Interestinly, I tried adding a ${SystemStatus.system2Available} into the body text, and it was rendered as literal text (i.e. not evaluated as EL), which is very curious -- makes me wonder if the included file is included as text, rather than JSP, although the custom taglibs and <f:form> tags etc are not in the generated HTML.
If I lift all the content between the <h:form> tags (inclusive) out of sysstatus.jsp and put it in greeting.jsp in place of the <jsp:include> tag, all is well.
Any ideas? All help gratefully recieved!
Thanks,
Paul

Personally, I think it is a bug in the rendering model of JSF itself because if you include any non-JSF tags, they don't get rendered according to my understanding of the what the spec says (in the location the tags are written).
The only workaround that I could come up with is to use straight JSF tags in all of your layers. Things are then rendered the way that they "should" be rendered.
You could try wrapping all of your HTML tags in <f:verbatim> tags and see if that helps.
Good luck!
David

Strange problem with the mail app on an iPad

I've got a bit of a strange problem with the mail app on an iPad - it's sending and receiving mail ok but won't let you delete mail. If you keep at it, it appears as if you have deleted mail (though takes a very long time as you just have to keep deleting it over and over again) - but the size of the app still keeps going up - reached 600mb so far, even though there is hardly any mail or attachments (goes up quite a lot each time you try to delete anything) - any idea what's causing this and how I can fix it?
It occasionally comes up with a dialogue panel saying to check my account settings, but I have checked those and they are fine. The little 'loading' icon just keeps spinning constantly too.

go to Settings > Mail > your account > Advanced > Move Discarded Messages Into
and make sure that Deleted Mailbox is ticked, and not Archive Mailbox
You can also adjust how long the deleted mail stays in the trash immediately below that.
If you are talking about a gmail account, you may also have to login to your account on the gmail server and update the settings there. This is what Barney previously posted about that:

Strange problem with ACLs

Hi,
I have just migrated an oracle database from 11.1.0.7 on Win Server 2003 to 11.2 on Linux 64 bit. I am having a strange problem with ACLs - I can create the ACL but when I perform either of the following two commands:
SELECT * FROM DBA_NETWORK_ACLS
or
SELECT * FROM NET$_ACL
I get no rows returned. The ACL exists somehow because if I try and create it again I get the error that it exists. Has anyone got any advice here? Something is out of sync and I need to know how to fix it up.
Thanks
Adam

BEGIN
DBMS_NETWORK_ACL_ADMIN.CREATE_ACL (
acl => 'email_server_acl.xml',
description => 'Network connection Email Server',
principal => 'MAIL',
is_grant => TRUE,
privilege => 'connect');
END;
PL/SQL procedure successfully completed.
select * from DBA_NETWORK_ACLS;
(no rows)
BEGIN
DBMS_NETWORK_ACL_ADMIN.CREATE_ACL (
acl => 'email_server_acl.xml',
description => 'Network connection Email Server',
principal => 'MAIL',
is_grant => TRUE,
privilege => 'connect');
END;
ORA-31003: Parent /sys/acls/ already contains child entry email_server_acl.xml
ORA-06512: at "SYS.DBMS_NETWORK_ACL_ADMIN", line 252
ORA-06512: at line 2
Edited by: Adam J. Sawyer on 15/04/2011 17:08

Some strange problem with Flash/As3

Hi,
I am having some strange problem with my flash cs3.
Whatever script I write in as3 doesn't work, even a stop() function doesn't work . But when I change my publish setting to as2 it works fine.
Not sure about the root cause, may be some setting or preference or my cs3 is corrupted.
Can anybody please advise.
Thanks,
Kishor

try this
create a new fla as3,
select frame 1
open the actions panel
paste in the following code
var squares:Array = new Array;
setup();
function setup():void {
 for (var i = 0; i < 25; i++) {
 var square:Sprite = new Sprite();
 //square.name = "square" + i;
 square.graphics.beginFill(Math.random() * 0xffffff);
 squares.push(square);
 squares[i].graphics.drawRect(0, 0, 100, 100);
 squares[i].x = i*3;
 squares[i].y = i*3;
 squares[i].filters = [];
 square.graphics.endFill();
 stage.addChild(squares[i]);
for (var j = 0; j < squares.length; j++) {
 squares[j].addEventListener(MouseEvent.MOUSE_DOWN, dragMovie);
 squares[j].addEventListener(MouseEvent.MOUSE_UP, dropMovie);
 squares[j].buttonMode = true;
function dragMovie(event:MouseEvent):void {
 event.target.startDrag();
function dropMovie(event:MouseEvent):void {
 event.target.stopDrag();

Strange problem with my ipod 2g after upgrade to os 4.2

Strange problem with my ipod 2g after upgrade to os 4.2
the problem with volume some times when i switch on the ipod i hear the sound
alarm rings it's work too i can hear it .. but the problem i cant hear anything else as yourtube or music i cant hear buttons sound when i typing
i hope i get help

I would try in order:
- Reset the iPod:
Reset iPod touch: Press and hold the On/Off Sleep/Wake button and the Home
button at the same time for at least ten seconds, until the Apple logo appears.
- Restore the iPod from backu via iTunes.
- Restore the iPod to factory defaults/new iPod.

Strange Problem with ARD 2.2 *Please Help*

Strange Problem with ARD 2.2 (2 problems)
We have a classroom lab with 14 G5 PPC's running 10.4.11 with ARD 2.2 clients installed.
We controlled all the G5's from a PPC Mac Mini running 10.4.11 with ARD 2.2, this was our Admin machine in our server room.
We then added a teachers machine in the lab, an iMac PPC running 10.4.11 and ARD 2.2 also with admin status.
Everything was working fine!
We then upgraded the iMac PPC to an iMac Intel with 10.4.11. We installed ARD 2.2 admin and did the intel intergration.
Everything worked fine.
The iMac PPC was moved to another location, ARD was removed following instructions on the Apple website telling us to delete the application then run some terminal commands to remove pref's.
Then our Intel iMac screen broke, we had the "lines" problem so bad only half the screen was visible. Long story short Apple wanted to charge us almost half the cost of the machine (no Applecare as it was a donated machine) to repair the screen!
So we moved the PPC iMac back into the lab, re-install ARD 2.2.
Now here is the problem, I can control, observe and run almost any command but cannot share with any computer!
2nd,the Mac Mini Tech computer is running fine but cannot control or observe the PPC iMac teacher machine (we were able to do this before) I can even share the Mac Mini with the iMac but cannot observe or control!!
Any ideas?

"With ARD you have to enable option to control a Mac which has ARD running on it as opposed to remotely controlling normal client Mac."
I'm not sure I understand, do you mean in System Pref's under sharing? Or is there somewhere else I need to enable to control?
Seems like a hassle to reinstall the entire OS just to fix this problem, I am able to do everything else, except observe from one admin to another, and control from 1 admin to clients.
thanks

Strange problem with WD component build

Hi all,
I have strange problem with building one wd component, which is part of SC. I'm getting few errors which stops me from building component (and transporting to other systems via CMS of course). I'm providing sample of the errors (3 types) and ant error:
[code]     [wdgen] [Error]   com.gbs.gmob.RequisitionFoCust --> ContextValueAttribute startDate [type]: Type missing (Hint: The type property must be set to a simple type, a built in type or any java native type)
     [wdgen] [Error]   com.gbs.gmob.RequisitionFoCust --> ContextValueAttribute stopDate [type]: Type missing (Hint: The type property must be set to a simple type, a built in type or any java native type)
     [wdgen] [Error]   com.gbs.gmob.SuppMatGroupView --> TextView MATERIAL_GROUP_NAME_editor [text]: Context element and property are not compatible
     [wdgen] [Error]   com.gbs.gmob.SuppMatGroupView --> TextView MATERIAL_GROUP_ID_editor [text]: Context element and property are not compatible
     [wdgen] [Error]   com.gbs.gmob.SupplierCust --> ContextModelNode SuppMatGroup [modelClass]: The context model node has not been bound to a model class (Hint: A Context model node has to be bound to a model class or mapped to a model node of another controller.)
     [wdgen] [Error]   com.gbs.gmob.SupplierCust --> ContextValueAttribute material_group_list [type]: Type missing (Hint: The type property must be set to a simple type, a built in type or any java native type)
     [wdgen] [Warning] com.gbs.gmob.ApprovalRejectView --> TextEdit TextEdit: UIElement does not have a label
     [wdgen] [Info]    Catching throwable null
     [wdgen] [Info]    com.sap.webdynpro.generation.ant.GenerationAntTaskError
     [wdgen]      at com.sap.webdynpro.generation.ant.GenerationAnt.showCheckResult(GenerationAnt.java:153)
     [wdgen]      at com.sap.ide.webdynpro.generation.Generation.check(Generation.java:2050)
     [wdgen]      at com.sap.ide.webdynpro.generation.Generation.generatePersistentComponent(Generation.java:1299)
     [wdgen]      at com.sap.ide.webdynpro.generation.console.GenerationConsole.generate(GenerationConsole.java:175)
     [wdgen]      at com.sap.webdynpro.generation.ant.GenerationAnt.main(GenerationAnt.java:50)
     [wdgen]      at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     [wdgen]      at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     [wdgen]      at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     [wdgen]      at java.lang.reflect.Method.invoke(Method.java:324)
     [wdgen]      at com.sap.webdynpro.generation.ant.WDGenAntTask.execute(WDGenAntTask.java:219)
     [wdgen]      at org.apache.tools.ant.Task.perform(Task.java:341)
     [wdgen]      at org.apache.tools.ant.Target.execute(Target.java:309)
     [wdgen]      at org.apache.tools.ant.Target.performTasks(Target.java:336)
     [wdgen]      at org.apache.tools.ant.Project.executeTarget(Project.java:1339)
     [wdgen]      at com.sap.tc.buildplugin.techdev.ant.util.AntRunner.run(AntRunner.java:115)
     [wdgen]      at com.sap.tc.buildplugin.AbstractAntBuildAction.execute(AbstractAntBuildAction.java:65)
     [wdgen]      at com.sap.tc.buildplugin.AbstractPlugin.handleBuildStepSequence(AbstractPlugin.java:225)
     [wdgen]      at com.sap.tc.buildplugin.AbstractPlugin.performBuild(AbstractPlugin.java:201)
     [wdgen]      at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     [wdgen]      at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     [wdgen]      at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     [wdgen]      at java.lang.reflect.Method.invoke(Method.java:324)
     [wdgen]      at com.sap.tc.buildtool.PluginCommunicator.maybeInvoke(PluginCommunicator.java:114)
     [wdgen]      at com.sap.tc.buildtool.PluginCommunicatorV2.communicate(PluginCommunicatorV2.java:42)
     [wdgen]      at com.sap.tc.buildtool.PluginHandlerImpl.handlePluginCommunication(PluginHandlerImpl.java:354)
     [wdgen]      at com.sap.tc.buildtool.PluginHandlerImpl.execute(PluginHandlerImpl.java:176)
     [wdgen]      at com.sap.tc.devconf.impl.DCProxy.make(DCProxy.java:1726)
     [wdgen]      at com.sap.tc.devconf.impl.DCProxy.make(DCProxy.java:5559)
     [wdgen]      at com.sap.ide.eclipse.component.provider.actions.dcproject.BuildAction.buildDCsForDevConfig(BuildAction.java:307)
     [wdgen]      at com.sap.ide.eclipse.component.provider.actions.dcproject.BuildAction.access$200(BuildAction.java:58)
     [wdgen]      at com.sap.ide.eclipse.component.provider.actions.dcproject.BuildAction$1.run(BuildAction.java:212)
     [wdgen]      at org.eclipse.jface.operation.ModalContext$ModalContextThread.run(ModalContext.java:101)
     [wdgen] ERROR: Unknown exception during generation null (com.sap.webdynpro.generation.ant.GenerationAntTaskError)
     [wdgen] ERROR: Generation failed due to errors (6 seconds)
Ant runtime 9.234 seconds
Ant build finished with ERRORS
[Error]   Generation failed!
Error: Build stopped due to an error: [Error]   Generation failed!
[/code]
Strange is that if I try to rebuild and deploy locally, no errors occurs and I can normally deploy and run application manually!
Does anyone have experience with this problem?
Thanks in advance!
Regards,
Ivan

Hi Ivan
I have faced this problem earlier BUT ultimately I have to create the DC from scratch.
But you can check these things:
1.Have you copy/pasted Dictionary type from other location (check the path of the dictionary types ) --> If yes then deleted that and create again(do not use copy/paste)
2.This also happens if your "Used DC" has some problems in the JDI --> Remove the used DC and add it again.
3.Make sure the NWDI infastructure is perfect- this may be a cause.
4. Check Context mappings --> delete all mappings > save metadata > Create again.
5. Delete the model and recreate it again.
6.If you have done reimporting model make sure to restart J2EE instance.
Hope this solves the problem - if not please post
Regards
Ananda

Strange Problem with a Vector wraped inside a Hashtable

Hi all ,
I'm having a strange problem with a Vector wraped within a Hashtable inherited Class.
My goal is to keep the order of the elements of the Hashtable so what I did was to extend Hashtable and wrap a Vector Inside of it.
Here is what it looks like :
package somepackage.util;
import java.util.Enumeration;
import java.util.Hashtable;
import java.util.Vector;
public class OrderedHashTable extends Hashtable {
 private Vector index;
 /** Creates a new instance of OrderedHashTable */
 public OrderedHashTable() {
 this.index = new Vector();
//adds a key pair value to the HashTable and adds the key at the end of the index Vector
 public synchronized Object put(Object key,Object value){
 index.addElement(key);
 Object obj = super.put(key,value);
 System.out.println("inside OrderedHashTable Put method index size = " + index.size());
 return obj;
public synchronized Object remove(Object key){
 int indx = index.indexOf(key);
 index.removeElementAt(indx);
 Object obj = super.remove(key);
 return obj;
public synchronized Enumeration getOrderedEnumeration(){
 return index.elements();
public synchronized Object getByIndex(int indexValue){
 Object obj1 = index.elementAt(indexValue);
 Object obj2 = super.get(obj1);
 return obj2;
 public synchronized int indexOf(Object key){
 return index.indexOf(key);
 public synchronized int getIndexSize() {
 return index.size();
 }Everything seemed to work fine util I tried to add objects using a "for" loop such as this one :
private synchronized void testOrderedHashTable(){
 OrderedHashTable test = new OrderedHashTable();
 for (int i = 1 ; i<15; i++){
 System.out.println("adding Object No " + i);
 String s = new String("string number = "+i);
 test.put(new Integer(i),s);
 System.out.println("-----------------------------------");
 //try to list the objects
 Enumeration e = test.getOrderedEnumeration();
 while (e.hasMoreElements()){
 Integer intObj = (Integer) e.nextElement();
 System.out.println("nextObject Number = "+ intObj);
 }Here is the console output :
Generic/JSR179: adding Object No 1
Generic/JSR179: inside OrderedHashTable Put method index size = 1
Generic/JSR179: -----------------------------------
Generic/JSR179: adding Object No 2
Generic/JSR179: inside OrderedHashTable Put method index size = 2
Generic/JSR179: -----------------------------------
Generic/JSR179: adding Object No 3
Generic/JSR179: inside OrderedHashTable Put method index size = 3
Generic/JSR179: -----------------------------------
Generic/JSR179: adding Object No 4
Generic/JSR179: inside OrderedHashTable Put method index size = 4
Generic/JSR179: -----------------------------------
Generic/JSR179: adding Object No 5
Generic/JSR179: inside OrderedHashTable Put method index size = 5
Generic/JSR179: -----------------------------------
Generic/JSR179: adding Object No 6
Generic/JSR179: inside OrderedHashTable Put method index size = 6
Generic/JSR179: -----------------------------------
Generic/JSR179: adding Object No 7
Generic/JSR179: inside OrderedHashTable Put method index size = 7
Generic/JSR179: -----------------------------------
Generic/JSR179: adding Object No 8
Generic/JSR179: inside OrderedHashTable Put method index size = 8
Generic/JSR179: -----------------------------------
Generic/JSR179: adding Object No 9
Generic/JSR179: inside OrderedHashTable Put method index size = 10
Generic/JSR179: inside OrderedHashTable Put method index size = 10
Generic/JSR179: -----------------------------------
Generic/JSR179: adding Object No 10
Generic/JSR179: inside OrderedHashTable Put method index size = 11
Generic/JSR179: -----------------------------------
Generic/JSR179: adding Object No 11
Generic/JSR179: inside OrderedHashTable Put method index size = 12
Generic/JSR179: -----------------------------------
Generic/JSR179: adding Object No 12
Generic/JSR179: inside OrderedHashTable Put method index size = 13
Generic/JSR179: -----------------------------------
Generic/JSR179: adding Object No 13
Generic/JSR179: inside OrderedHashTable Put method index size = 14
Generic/JSR179: -----------------------------------
Generic/JSR179: adding Object No 14
Generic/JSR179: inside OrderedHashTable Put method index size = 15
Generic/JSR179: -----------------------------------
Generic/JSR179: nextObject Number = 1
Generic/JSR179: nextObject Number = 2
Generic/JSR179: nextObject Number = 3
Generic/JSR179: nextObject Number = 4
Generic/JSR179: nextObject Number = 5
Generic/JSR179: nextObject Number = 6
Generic/JSR179: nextObject Number = 7
Generic/JSR179: nextObject Number = 8
Generic/JSR179: nextObject Number = 9
Generic/JSR179: nextObject Number = 9
Generic/JSR179: nextObject Number = 10
Generic/JSR179: nextObject Number = 11
Generic/JSR179: nextObject Number = 12
Generic/JSR179: nextObject Number = 13
Generic/JSR179: nextObject Number = 14
You can notice that the output seems correct until the insertion of object 9.
At this point the vector size should be 9 and the output says it is 10 elements long ...
In the final check you can notice the 9 was inserted twice ...
I think the problem has something to do with the automatic resizing of the vector but I'm not really sure. Mybe the resizing is done in a separate thread and the new insertion occurs before the vector is resized ... this is my best guess ...
I also tested this in a pure J2SE evironment and I don't have the same strange behavior
Can anybody tell me what I am doing wrong or how I could avoid this problem ?
Thanks a lot !
Cheers Alex

Am i doing anything wrong?Uhm, yes. Read the API doc for addElement() and for addAll()

Strange problem with SQL query in toad.

Guys,
My colleague is up with a strange problem with an SQL query that if it is run in toad encounters the "ORA-03113: end-of-file on communication channel" problem,but if run in SQL plus executes just fine.
Do anyone have thoughts about this strange error in toad?
Thanks!!!!
Regards,
Bhagat

Not sure what version of TOAD you have but it may have shipped with SQLMonitor which montiors SQL sent from Windows apps . Navigation should be similar to;
Start~Programs~Quest Software~TOAD for Oracle~Tools~SQLMonitor
or
C:\Program Files\Quest Software\Toad for Oracle\SQLMonitor.exe
To use it, start TOAD and connect, start SQLMonitor and click the checkbox for TOAD.exe, then execute the query. SQLMonitor will show you the actual query that TOAD sent to the client. It may be exactly what you sent or it may contain some extras.

Strange problem with desktop

Hi, I have a very strange problem with desktops and dashboards something else. For example, when I am on desktop 2 and i go to desktop 1, when I click with the mouse on it, it goes again to desktop 2. or when I am on desktop 1 and I go to ddashboard, it returns again to desktop 1 when i click to something in the dashboard.
but, if i am on desktop 3, and i go to desktop 1 throguh desktop 2, there is no problem. the same if i go from desktop 2 to dashboard.
I hope i've been clear enough to let you understand this... explanation =P
Anyone can help?

My system has started "freezing". Actually, usually when I'm browsing the net, Chromium stops loading pages. Conky stops updating, and usually I can't switch to another programs. I can't start xkill from menu, menu opens but nothing starts. If I run "ls" etc in Terminal, nothing happens
I can however control+alt+F1 to CLI, but if I try to login nothing happens.If doesn't help even if I kill X (I started it with startx). And if I don't kill X, I can't go back from CLI with control+alt+F7, there's just a black screen.
I'm using Nvidia drivers also, and XFCE4. This started happening some time ago, I think I was using Gnome2 back then. And I have updated my system, and this has happened at least with 3 kernel versions. There's nothing on logs. Well, actually, there's "TCP: Possible SYN flooding on port 6881. Sending cookies" errors on everything.log. But those don't happen when system freezes. And sometimes Chromium stops loading pages but other programs don't freeze, I think it's a problem with cache or something.
Not really sure if this everything happens because of Chromium. I think I'm gonna switch back to Firefox and see what happens. Usually I'm running Chromium, Opera (use it just for a couple of pages), couple of Terminals and Kaffeine.

Strange problem with connection to Integrator Server

Hi,
I have a strange problem with making a connection to my Integrator Server.
I have one workspace folder that I share between Integrator version 2.4 and 3.0 (I have several versions installed for testing purposes)
When I try to create a new Integrator Server Project in Integrator Designer I get this nice 'Connect to CloverETL Server' panel.
By default: the connection URL is http://localhost:8080/clover. So by default Integrator Designer wants to connect to my 2.4 Integrator Server.
When I change this to http://localhost:8301/clover by using the drop-down box and fill in my credentials everything is looking fine. I click Next.
The problem now is that every time I switch to the next or previous configuration windows the connection is reset to the default http://localhost:8080/clover.
So it seems like Integrator Designer resets the CloverETL Server URL each time I switch to a different configuration window by using NEXT or BACK.
The problem occurs in both versions of Integrator Designer.
Does anybody know that the problem is? Can I change the default URL to my 3.0 Integrator Server?
Greetings,
Marcow
Edited by: Marco Snels (AortaBI)(NL) on 31-mei-2013 4:59

I'm using iPlanet App server as well and experiencing similar problem. I load my SQL Server driver by Class.forName("com.microsoft.jdbc.sqlserver.SQLServerDriver"), then use DriverManager.getDriver() to obtain the Driver.
However, the Driver returned is not the SQLServerDriver as expected. The Driver returned is com.netscape.server.jdbc.Driver! And then when I do Driver.getConnection("jdbc:microsoft:sqlserver://MyServer"), it throws an SQLException saying that it doesn't accept a jdbc:microsoft:sqlserver subprotocol. Well, of course it doesn't, it's not a microsoft Driver at all.
I suspect the problem is that the netscape Driver's acceptsURL() method ALWAYS returns true in iPlanet app server, thus when you getDriver(), the netscape Driver is always returned (and always returned as the first one since it's default?). Thus even though the same piece of code works fine as a standalone application, it just doesn't work on iPlanet app server.
My work around is:
Class.forName("my.Driver");
Enumeration enu = DriverManager.getDrivers();
Driver useThis = null;
while (enu.hasMoreElements()) {
Driver d = (Driver)enu.nextElement();
if (d.getClass().toString().indexOf("my.Driver") > -1) {
useThis = d;
Mind that my above code does not have an performance issue. If you look into the source code of how DriverManager get a Driver for a particular URL, it also loads the whole set of available Drivers, then call acceptsURL() method on each of them to find the first "suitable" one. Thus time complexity is the same.
I know this is not a very elegant solution and it defeats the purpose of having a DriverManager. Does any one else has a better way to solve this problem, like a way to specify the priority of each Driver so that SQLServerDriver is returned before the netscape Driver?
Thanks a lot.

Strange Problem with Forms (Smart Forms)

I have lately been experiencing a strange problem with standard forms in the system. We have WebAS640 / ECC5.0 System. Soon after the initial run of patches, most forms in the system are showing the character '#' in place of formatted texts.
I have searched the internet and most forums, but have not found a solution. Since this is the standard forms that i am talking about (unmodified and untouched) so i assumed this had something to do with our patch levels. However that is only an assumption.
In particular i am having problem with the billing invoice type RD00, form name: LB_BIL_INVOICE. I have traced the problem to this much. The form shows the expected text, where no character format is applied to it. And where ever there is some character format, it just shows a string of hashes ('#'). The style being used by this form is LO_STYLE.
I am also listing my patch levels in case that helps.
SAP_BASIS     640             0014
SAP_ABA             640             0014
ST-PI             003C_640     0001
PI_BASIS     2004_1_640     0006
SAP_BW             350             0012
SAP_HR             500             0005
SAP_APPL     500             0006
PI             2004_1_500     0004
EA-IPPE             300             0004
EA-RETAIL     500             0005
EA-PS             500          0005
EA-HR             500          0005
EA-GLTRADE     500          0005
EA-FINSERV     500          0005
EA-DFPS      500          0005
EA-APPL      500           0005
Hope somebody can help in regard

Hi Ashan!
Interesting problem. You are seeing replacement characters, because assigned font(size) is not installed (somewhere, SAP or printer).
But since this is completely standard, open an OSS-request - maybe it's not as fast as SDN, but I'm sure you will get a qualified answer (and solution).
Regards,
Christian

Strange problem with CachedRowSet

Similar Messages

Maybe you are looking for