Strange problem with changing external links site-wide

Hi, i'm having a problem that i just cant work out; i'll describe whats happening and would greatly apriciate any help anyone can give.
when i type in an external/absolute link in dreamweaver sidewide change link function i keep getting a message saying it cant find any links with that name ("no links to.....found".
i've tried creating a simple link in my index.html like http://google.com then searching for that so i know its there and dreamweaver still tells me that http://google.com, www.google.com, /google.com and every other variation i can think of doesnt exist. In addition to that when i search for broken links and click external links to try changing them there, the search function finds the links i'm looking for and lets me type in the new link i want but when i hit enter it reverts to the old link.
at first i thought it was a problem with my copy of dreamweaver but i downloaded my site to a hard drive and tried on my uni computers copy of dw cs3 and cs4 with the same outcome.
i have about 1000 of the particular link in my site that i need to change and really dont want to do this manually, if anyone could help i'd be extremely grateful.
thanks, Andy

note: although it seems straight forward i also followed youtube guides on defining my site and changing the links to make sure i hadnt missed something obvious.
although it still maybe something obvious i just cant see it and i've been googling to find out if other people have had this problem but couldnt find anything

Similar Messages

Urgent question very Strange problem with an external HD on mac PRO

Hi,
I have a problem with a external HD on my mac pro.
After many month of regular use with out any problem today when I turned on the HD I could not see it in the finder anymore.
I use this HD for backup of an other external HD and to do the back up I use an application called SYN SYNC
The strange things are:
1) If I start Sync Sync everything works properly as if the sofware recognize with out problem that the HD is effectively there.
2) If I open DISK UTILITY I can see the HD and if I try to repair it the utility after 2 minutes says that everything is ok.
3) If I look for the mac pro (to which the external HD incriminated is connected) on a different mac in my studio over the net I can see the external HD and I can browse the folder, copy items from the esternal HD to the MAC and even copy thing on the external HD.
I tried to connect directly via Fire wire 800 the HD on a different MAC and I could not see it like on the mac pro.
Does enyone have an idea of what's going on?
best regards
Lorenzo

I can still see all the others external Hd with out any problem and I already try this but no results I can't see that HD on the desktop and neither in the sidebar.
As I said the strange thing is that the external HD shows the same behaviour when is connected to a different MAC.
Seams the problem is with the HD not with the MAC.
I even try to use a different case for the HD using also USB connection instead of FW, but nothing change!

Strange problems with Dynamic Partner Linking, how to reset conversation Id

Hi,
We have dyanamic partner linking with synchronous BPEL process. For testing this I have created an xml which is having 3 Dyanmic links for the same partener link. When I execute the first one gets executed but second one onwards it throws bpel fault exception When I am looping through the XML the first linking is working but when it tries to do the second call to the same end point it faults out saying
<bindingFault xmlns="http://schemas.oracle.com/bpel/extension">
<part name="code">
<code>GenericError</code>
</part>
<part name="summary">
<summary>null</summary>
</part>
</bindingFault>
I tried several ways, bottom line this what I am getting in Do parter link assing in both loops. In my observation it generates some conversation Id which is null in the first iteration but from second one onwards.. it is generating some value which I am unable to reset. I belive if I can reset that converstationId to null probably I won't get this bepelFault.
Please let me know if you need more information.
First Scenario:
<partnerLink name="PartnerLink_Campus_PIDS" partnerLinkType="{http://xmlns.oracle.com/PIDSUpdate_CHCS}PIDSUpdate_CHCS">
<myRole name="null">
<ServiceName>null</ServiceName>
<PortType>null</PortType>
<Address>null</Address>
</myRole>
<partnerRole name="PIDSUpdate_CHCSProvider">
<ServiceName>{http://xmlns.oracle.com/PIDSUpdate_CHCS}PIDSUpdate_CHCS</ServiceName>
<PortType>{http://xmlns.oracle.com/PIDSUpdate_CHCS}PIDSUpdate_CHCS</PortType>
<Address>http://val-ossminc:9700/orabpel/default/PIDSUpdate_CHCS</Address>
</partnerRole>
<conversationId>null</conversationId>
<properties>{}</properties>
</partnerLink>
Second Scenario:
[2006/04/18 22:37:10] Updated variable "PartnerLink_Campus_PIDS" less
<partnerLink name="PartnerLink_Campus_PIDS" partnerLinkType="{http://xmlns.oracle.com/PIDSUpdate_CHCS}PIDSUpdate_CHCS">
<myRole name="null">
<ServiceName>null</ServiceName>
<PortType>null</PortType>
<Address>null</Address>
</myRole>
<partnerRole name="PIDSUpdate_CHCSProvider">
<ServiceName>{http://xmlns.oracle.com/PIDSUpdate_CHCS}PIDSUpdate_CHCS</ServiceName>
<PortType>{http://xmlns.oracle.com/PIDSUpdate_CHCS}PIDSUpdate_CHCS</PortType>
<Address>http://val-ossminc:9700/orabpel/default/PIDSUpdate_CHCS</Address>
</partnerRole>
<conversationId>bpel://localhost/default/iXPPIDSUpdateBroadCast~1.0/8909-BpInv0-BpSeq1.5-5</conversationId>
<properties>{}</properties>
</partnerLink>
I clearing the end point the following way.
<assign name="ClearEndpoint">
<copy>
<from>
<EndpointReference xmlns="http://schemas.xmlsoap.org/ws/2003/03/addressing" xmlns:ns1="http://xmlns.oracle.com/PIDSUpdate_CHCS">
<Address/>
<ReferenceProperties/>
<ServiceName/>
</EndpointReference>
</from>
<to variable="partnerReference"/>
</copy>
</assign><!-- set the address in the endpoint variable
Dynamic Links XML :
<Dynamiclinks xmlns="http://ixp.mhs.dod.gov/DynamicLinksSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<Dynamiclink>
<address>http://val-ossminc:9700/orabpel/default/PIDSUpdate_CHCS
</address>
<service_name>ns1:PIDSUpdate_CHCS
</service_name>
</Dynamiclink>
<Dynamiclink>
<address>http://val-ossminc:9700/orabpel/default/PIDSUpdate_CHCS
</address>
<service_name>ns1:PIDSUpdate_CHCS
</service_name>
</Dynamiclink>
</Dynamiclinks>
Does any one how to reset the convesation Id, it will be a big help for me.
Regards,
Sridhar Dabbeeru

Hi,
We have dyanamic partner linking with synchronous BPEL process. For testing this I have created an xml which is having 3 Dyanmic links for the same partener link. When I execute the first one gets executed but second one onwards it throws bpel fault exception When I am looping through the XML the first linking is working but when it tries to do the second call to the same end point it faults out saying
<bindingFault xmlns="http://schemas.oracle.com/bpel/extension">
<part name="code">
<code>GenericError</code>
</part>
<part name="summary">
<summary>null</summary>
</part>
</bindingFault>
I tried several ways, bottom line this what I am getting in Do parter link assing in both loops. In my observation it generates some conversation Id which is null in the first iteration but from second one onwards.. it is generating some value which I am unable to reset. I belive if I can reset that converstationId to null probably I won't get this bepelFault.
Please let me know if you need more information.
First Scenario:
<partnerLink name="PartnerLink_Campus_PIDS" partnerLinkType="{http://xmlns.oracle.com/PIDSUpdate_CHCS}PIDSUpdate_CHCS">
<myRole name="null">
<ServiceName>null</ServiceName>
<PortType>null</PortType>
<Address>null</Address>
</myRole>
<partnerRole name="PIDSUpdate_CHCSProvider">
<ServiceName>{http://xmlns.oracle.com/PIDSUpdate_CHCS}PIDSUpdate_CHCS</ServiceName>
<PortType>{http://xmlns.oracle.com/PIDSUpdate_CHCS}PIDSUpdate_CHCS</PortType>
<Address>http://val-ossminc:9700/orabpel/default/PIDSUpdate_CHCS</Address>
</partnerRole>
<conversationId>null</conversationId>
<properties>{}</properties>
</partnerLink>
Second Scenario:
[2006/04/18 22:37:10] Updated variable "PartnerLink_Campus_PIDS" less
<partnerLink name="PartnerLink_Campus_PIDS" partnerLinkType="{http://xmlns.oracle.com/PIDSUpdate_CHCS}PIDSUpdate_CHCS">
<myRole name="null">
<ServiceName>null</ServiceName>
<PortType>null</PortType>
<Address>null</Address>
</myRole>
<partnerRole name="PIDSUpdate_CHCSProvider">
<ServiceName>{http://xmlns.oracle.com/PIDSUpdate_CHCS}PIDSUpdate_CHCS</ServiceName>
<PortType>{http://xmlns.oracle.com/PIDSUpdate_CHCS}PIDSUpdate_CHCS</PortType>
<Address>http://val-ossminc:9700/orabpel/default/PIDSUpdate_CHCS</Address>
</partnerRole>
<conversationId>bpel://localhost/default/iXPPIDSUpdateBroadCast~1.0/8909-BpInv0-BpSeq1.5-5</conversationId>
<properties>{}</properties>
</partnerLink>
I clearing the end point the following way.
<assign name="ClearEndpoint">
<copy>
<from>
<EndpointReference xmlns="http://schemas.xmlsoap.org/ws/2003/03/addressing" xmlns:ns1="http://xmlns.oracle.com/PIDSUpdate_CHCS">
<Address/>
<ReferenceProperties/>
<ServiceName/>
</EndpointReference>
</from>
<to variable="partnerReference"/>
</copy>
</assign><!-- set the address in the endpoint variable
Dynamic Links XML :
<Dynamiclinks xmlns="http://ixp.mhs.dod.gov/DynamicLinksSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<Dynamiclink>
<address>http://val-ossminc:9700/orabpel/default/PIDSUpdate_CHCS
</address>
<service_name>ns1:PIDSUpdate_CHCS
</service_name>
</Dynamiclink>
<Dynamiclink>
<address>http://val-ossminc:9700/orabpel/default/PIDSUpdate_CHCS
</address>
<service_name>ns1:PIDSUpdate_CHCS
</service_name>
</Dynamiclink>
</Dynamiclinks>
Does any one how to reset the convesation Id, it will be a big help for me.
Regards,
Sridhar Dabbeeru

Strange problem with linking to external vob-file

I have a strange problem with linking to external vob-file. I
have created a link using BudApi:
on mouseup
set OK = baOpenFile ( the pathname &
"Files\General\Video\VTS_01_1.VOB", "normal")
end
This code opens mpg-videos correctly, but nothing happens
when I try to open vob-files with the same code. The strangest
thing is that when I change the default program for vob-files to
WinDVD this code works and the file opens, but when I change the
default program to Nero Showtime this code doesn't do anything
(when I open the file 'manually' from the folder, it opens
correctly on Nero Showtime). My client uses Nero Showtime, so I
really would appreciate any help on this one.

temes wrote:
>
quote:
Originally posted by:
Newsgroup User
>> When using Nero Showtime as a default program, the
error code is 31,
>> "There is no application associated with the given
filename".
>
> Which suggests that something has gone wrong with file
associations.
> If
> you double-click one of these files in an Explorer
window does it fire
> up Showtime and open the file?
>
>
> Yes, the file opens correctly in Nero Showtime when
double-clicking
> it in an Explorer. I tried the file associations and
created a
> html-page with a link to the vob-file, and the html-link
opens the
> vob-file correcly with Nero Showtime. My client reported
this
> problem, so it's not just my computer which is having
this problem.
If you open a command prompt, do you get an association
listed like this
example for .txt files:
C:\>assoc .txt
.txt=txtfile
C:\>ftype txtfile
txtfile="D:\Program Files\JGsoft\EditPadLite\EditPadLite.exe"
"%1"
Andrew

Strange problem with Database LInk

Hi Everyone,
I have strange problem with Database Link in Oracle 11g Express Edition;
There are two computers: computer-server and computer-client. Tnsnames.ora are the same on both computers ie.
CT =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = krzysztof)(PORT = 1521))
(CONNECT_DATA = (SERVICE_NAME = XE)
I created database link :
Create database link zdalny
Connect to <user_id> identified by <password>
using ‘CT’;
Client can’t connect with server when I am using above command. But when I change “using” for using ‘krzysztof:1521’ or using ‘krzysztof’ or using ‘server IP:1521’ – everything is ok.
Why I am asking. Because in all materials which I am reading about Oracle command with using ‘CT’ should be working correct. But there is not. Do you know, why?
Thanks in advance and apologize for my English.
Rgds
Krzysztof

Krzysztof Szymaniak wrote:
Thanks for all replies.
Below is server's tnsnames.ora
CT =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = krzysztof)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = XE)
EXTPROC_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1))
(CONNECT_DATA =
(SID = PLSExtProc)
(PRESENTATION = RO)
ORACLR_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1))
(CONNECT_DATA =
(SID = CLRExtProc)
(PRESENTATION = RO)
SQL Error: ORA-12154: TNS:could not resolve the connect identifier specified
12154. 00000 - "TNS:could not resolve the connect identifier specifie
Rgds
Krzysztof
PS. I tried with using 'XE' - not working.Assuming that is the correct tnsnames, of course XE is not working. You don't have a tnsnames entry for 'XE'.
You need to be aware that when using a dblink, the client is the db in which the link is defined, not the desktop from which you connect to that database.
I think you need to start here:
http://edstevensdba.wordpress.com/2011/02/26/ora-12154tns-03505/
http://edstevensdba.wordpress.com/2011/02/09/sqlnet_overview/ (Help! I can’t connect to my database )
http://edstevensdba.wordpress.com/2011/02/16/sqlnet_client_cfg/ (Help! I can’t connect to my database (part duex) )
The fact that your client (db link) is a database doesn't change anything taught in the above.

Strange problem with Dreamweaver Pop-Up menus

Hello:
I have encountered a very strange problem with DreamWeaver
pop-up menus, and I was wondering if I could get some help from
this forum, as I can't seem to find an answer anywhere else.
The problem involves use of DreamWeaver's pop-up menu
behavior — all works as expected, and my local preview of the
Web page/site works fine, but when I upload the site to a server, I
see extra question mark and "box" characters added to my drop-down
menus. This problem is inconsistent between browsers: Sometimes I
see it only on IE, sometimes I also see it on Firefox.
For example, check out the following URLs:
http://libertycreativesolutions.net/clients/cci/
... this implementation of drop-down menus ("Services"
button, etc.) displays an extra "box" character for each of the
drop-down menu items, but this only occurs in IE -- Firefox is
fine.
http://libertycreativesolutions.net/clients/microtek/HTML/MicroTek_home.html
... this implementation of drop-down menus shows an extra
question mark above the triggering link onMouseOver for Firefox,
and in IE, it shows this "box" character for both the triggering
buttons and for each menu item.
For both of these sites, the pop-up menus work without a
problem *when I'm looking at a local version on my workstation*.
What in the Wide Wide World of Sports is going on here????
Any help for this problem is appreciated.
Note that I stripped out the JavaScript code for menu
information from the <head></head> area of each of
these pages and placed it in a linked JavaScript document.
HELP!

First, you need to read this, written by the person who
adapted that menu
code for Macromedia -
http://www.losingfight.com/blog/2006/08/11/the-sordid-tale-of-mm_menufw_menujs/
Then you need to know that there are MUCH better ways to do
such things -
Check the uberlink and MacFly tutorials at PVII -
http://www.projectseven.com/
and the Navbar tutorial/articles at Thierry's place
http://tjkdesign.com/articles/dropdown/
Or this one (more recent article):
http://tjkdesign.com/articles/Pure_CSS_Dropdown_Menus.asp
Or to get it done fast, go here -
http://www.projectseven.com/tutorials/navigation/auto_hide/index.htm
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"Pomond69" <[email protected]> wrote in
message
news:[email protected]...
> Hello:
> I have encountered a very strange problem with
DreamWeaver pop-up menus,
> and I
> was wondering if I could get some help from this forum,
as I can't seem
> to
> find an answer anywhere else.
>
> The problem involves use of DreamWeaver's pop-up menu
behavior ? all works
> as
> expected, and my local preview of the Web page/site
works fine, but when I
> upload the site to a server, I see extra question mark
and "box"
> characters
> added to my drop-down menus. This problem is
inconsistent between
> browsers:
> Sometimes I see it only on IE, sometimes I also see it
on Firefox.
>
> For example, check out the following URLs:
>
>
http://libertycreativesolutions.net/clients/cci/
> ... this implementation of drop-down menus ("Services"
button, etc.)
> displays
> an extra "box" character for each of the drop-down menu
items, but this
> only
> occurs in IE -- Firefox is fine.
>
>
http://libertycreativesolutions.net/clients/microtek/HTML/MicroTek_home.html
> ... this implementation of drop-down menus shows an
extra question mark
> above
> the triggering link onMouseOver for Firefox, and in IE,
it shows this
> "box"
> character for both the triggering buttons and for each
menu item.
>
> For both of these sites, the pop-up menus work without a
problem *when I'm
> looking at a local version on my workstation*.
>
> What in the Wide Wide World of Sports is going on
here???? Any help for
> this
> problem is appreciated.
>
> Note that I stripped out the JavaScript code for menu
information from the
> <head></head> area of each of these pages
and placed it in a linked
> JavaScript
> document.
>
> HELP!
>

Strange problems with memory dimms(Banks) in imac 27in mid2010

Hello dear Apple community. I had a really strange problem with memory dimms(modules anyway)
I have one really good imac 27in with i7 but as you know after some years the lcd screen became yellowish and cloudy
So i decided to clean it as i have some knowledge and i did that to others lcd screens with success.
OK so after successfully cleaning and working like new ( i mean not the external screen with magnets but the lcd internally)i started it.
Before dismantling my memory was 16gb ( 4x4 dimms)
After starting it a strange problem arise without any reason! Memory reduced TO 8 GB!!!! memory banks on the right as we seeing it didnt worked at all
and it was not from dimms because i swapped them..!!!
So after a lot of thinking and asking tech guys to take a second opinion all the saying (including me that logic board failed for some strange reason.
Some days before i installed CCleaner and also Onyx because after a lot of installations and uninstallations my mac became a little sluggish..
I thought that some serious preferences files removed or some hardware settings deleted with Onyx ( is very good and powerful program that can fix the pc and also destroy it in a second) so i removed and reset all preferences. But nothing changed.. So i put a new hard drive and reinstall OXS to see if something can change.
After formating HD to appleHFS+ saw system profiler that still couldn't see all banks(16gb). I remove logic board and i put another processor i7 that i have as a back up and still nothing( some saying that only these 2 things must be faulty if memory banks not working , processor an logic board and sometimes reinsatlling OS can fix it as i mentioned before. But still nothing...
So from my nerves and after so much testings and no sleeping for 2 days as it was working i pulled off the memory modules from the right bank i put them again ( off course nothing changed) and i close it. After i restarted it like a miracle finally i saw that i have again 16gb in system profiler!!
Tech guys here please give me an explanation to this because i gooing crazy! What happened and after i pulled off the dimms while it was working the problem fixed?? It is not recomended at all this action. I forgot to mention that i did Apple hardware test and nothing found..
Sorry for long post.

Okay great news... My memory problems are solved and my Mac Mini is now running at 8 gigs of Ram. I tried the suggested DD3 1333 which the computer wouldn't even recognize.
So after visiting the Apple Store in the Fair Oaks VA shopping mall; they suggested that I try DDR3 8500 ram. I visited Micro Center in Vienna VA, and I purchased BGreg's Suggested Crucial Brand Ram. 10 minutes after I got home the Mac Mini booted on the 1st try with 8 gigs of Ram.
Some venting that Apple hopefully will read and mention to their resellers....
The people in the Apple section of MicroCenter in Vienna at first argued that the Mac Mini only supports 4 gigs. EVEN AFTER I SHOWED THEM THE SPECS on the Apple website. The clerk (who I am calling a clerk because by no means was he a "specialist") even suggested that the Apple site was wrong. On a later visit to MicroCenter to purchase the DDR3 8500, that the people at Apple recomended; Microcenter even suggested and argued that I needed DDR3 1333 and NOT DD3 8500. THIS WAS AFTER I TOLD THEM THAT Mac Mini WOULD NOT RECOGNIZE the DD3 1333 Dimms. Working in retail myself I don't go along with the concept that the customer is always right, however in this instance clearly I was.
I should point out that some of the staff in Microcenter really do try hard, however like with any business it only takes a few "know it all" bad examples to turn customers off.
Curious post thought; I wasted about $75 in gas driving to and from Microcenter because of their bad advice.

Changing font color site-wide??

Hi,
I am trying to change the color of my font and my links
site-wide. Is there any easy way to do this?
Thanks,
David

You would need to add those to a stylesheet that was linked
to all the
pages, not just in the head of a single document.... 8)
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"Virginia Carter" <[email protected]>
wrote in message
news:g2ui3m$sml$[email protected]..
> Yep -- you can do this with CSS...
>
> If you want all your text to be red, then just add this
to the head of the
> document:
>
> <style type="text/css>
>
> body {color: #F00;}
>
> </style>
>
> Likewise, if you want all of your links to be white, you
would add the
> following:
>
> a {color: #FFFFFF;}
>
> Those will globally change your font color and link (a
href) color
> throughout your entire site, assuming you don't have any
other CSS
> anywhere...
>
> --
> Virginia Carter
> Carolina Web Creations
> ======================
> www.carolinawebcreations.biz
>
> David Way wrote:
>> Hi,
>>
>> I am trying to change the color of my font and my
links site-wide. Is
>> there any easy way to do this?
>>
>> Thanks,
>>
>> David

Strange problem with purple-remote

Hi, I experience a strange problem with purple-remote (program which allow to control Pidgin via D-Bus) :
To get the current status message, you have to type
$ purple-remote getstatusmessage
This works, but when I type
$ echo $(purple-remote getstatusmessage)
this fails with the error
Traceback (most recent call last):
File "/usr/bin/purple-remote", line 238, in <module>
print output
UnicodeEncodeError: 'ascii' codec can't encode character u'\xe9' in position 12: ordinal not in range(128)
Why?
How can this program work in the first case but not in the second?
Thank you
Edit: BTW, is there a workaround to put the output of `purple-remote getstatusmessage' in a variable? $(), redirections and piping doesn't work.
Fractal
Last edited by Fractal (2010-04-04 12:09:56)

Hi Andyh,
Welcome to the forum. How annoying does that sound, if I had to get up every time I wanted to change channel or volume I would crack up.
Drop me an email to [email protected], please include your BT account details and I will see what can be done to help.
Cheers
Sean
BTCare Community Manager
If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
We are sorry that we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-)

Strange problem with Contribute 3

I have a strange problem with Contribute 3. One of my page
editors changed a single page on my web site and submitted it for
review. When I go to review the page, 75 pages show up to be
reviewed. If I try to edit the actual page that was changed, it
tells me I can't approve the changes until I accept the changes on
the other pages and each of those pages gives the same message...an
infinite loop. The only way to get around this is to reject each
page individually and this took several hours. She tried again and
the same thing happened. How can I fix this problem. I think it is
a bug in Contribute because 74 of these pages had no changes to
them.

Still haven't solved this, even the backup no longer works...Would anyone be interested in helping me by letting me send them a project, making one simple change for me, then saving the project, returning it to me and exporting it as wav?
this would help me tremendously...
let
me
know
if
u
can
help
anyone be interested in helping Mr

Strange problem with jpcap library.

Hello everone;)
I have a very strange problem with jpcap. I have ubuntu 8.10, libpcap installed by apt (manually upgraded to 0,9,8) and jpcap 0.7 (installed from deb package).
My code is:
* To change this template, choose Tools | Templates
* and open the template in the editor.
package agh;
import java.util.logging.Level;
import java.util.logging.Logger;
import jpcap.*;
import jpcap.packet.Packet;
* @author iceman
public class Main
     * @param args the command line arguments
    public static void main(String[] args)
        try
            Tcpdump interfejsy = new Tcpdump();
        catch (Exception ex)
            Logger.getLogger(Main.class.getName()).log(Level.SEVERE, null, ex);
//        agh_MainFrame ramka = new agh_MainFrame();
//        ramka.setVisible(true);
    // TODO code application logic here
class Tcpdump implements PacketReceiver
    public void receivePacket(Packet packet)
        System.out.println(packet);
    public Tcpdump() throws Exception
        System.out.println("wszedlem do wykazu interfejsow");
        NetworkInterface[] devices = JpcapCaptor.getDeviceList();
        if (devices.length ==0)
           System.out.println("no devices");
        for (int i = 0; i < devices.length; i++)
            System.out.println(i + " :" + devices.name + "(" + devices[i].description + ")");
System.out.println(" data link:" + devices[i].datalink_name + "(" + devices[i].datalink_description + ")");
System.out.print(" MAC address:");
for (byte b : devices[i].mac_address)
System.out.print(Integer.toHexString(b & 0xff) + ":");
System.out.println();
for (NetworkInterfaceAddress a : devices[i].addresses)
System.out.println(" address:" + a.address + " " + a.subnet + " " + a.broadcast);
When i start this simple code it isn't working correctly. On the output i have only "no devices". JpcapCaptor doesn't see any mine network interfaces. On windows this code works correctly.
Anyone has any idea what is wrong?
Thanks,
iiceberg

Hi, guys,
I also have a similar problem but in Windows. I've been using a W2008 Server for a short time. For what I've seen and have been told, it works like a Vista. I've wrote a program which uses jpcap and winpcap and, first of all, gets the device list.
Well, if I boot my computer and log on with my usual account, which in theory is an administrator, gets 0 devices when I run the program.
Then, if I log on with the actual Administrator account i works perfectly.
And, if after logging and running the program with the Administrator account (NOT just logging on) I log on with my usual account, it works too.
It's like the Adm account has some kind of "top" permission that doesn't go away at logoff. I tried that because I had some other problems accessing the DVD-ROM for writing from my usual account.
I think that I doesn't happen in WXP, but I haven't tested that last problem, yet.
Any ideas??
Thank you.

Strange Problems With Display and Permissions Since 10.5.1 update.

Since I've done the 10.5.1 update I have been having a strange problem with my desktop and dock displays. On my desktop I have these strange lines that appear any time I log in or open any application, the lines never go away and change locations on the screen once I open an application or move a window. My dock has the reflective shelf for about half of it, the rest is a dull grey. I've also had problems with verifying and repairing my permissions. I can never actually complete either permissions task. I've used some third party apps, they always fail as well. The only time I can actually repair my permissions is by booting in to single user mode and doing a fsck -f command. When I boot back in to Leopard and try to use the Disk Utility to repair, it continues to fail.
I'm not sure if the video problem I am having stems from a permissions issue or possibly a corrupt video driver. Either way, I've done a lot research and haven't found anyone with the same problems I have been having so I thought I would give these forums a shot.
I am using a PowerMac G4 Quicksilver with dual 800Mhz, 1.5gb RAM, and a GeForce4 Ti 4600 128mb video card.
Here is a screen shot of the line and dock problem.
Here is a screen shot of my "About This Mac.
If anyone could lend some light on this issue, I would greatly appreciate it.
Thanks
Jeff

you can pile it on this: http://discussions.apple.com/thread.jspa?threadID=1246649&tstart=0
btw - no solution yet.

Problems with the windows update site in 32-bit Vista Business

Hi Everyone,
I am experiencing problems with the windows update site. As far as I know it shold make a link to the Windows Update module on-board and show the available updates after scanning. However, I get to the page that says "Checking if your computer has the latest version of Windows updating software for use with this website" and the next page I get is "The website has encountered a problem and cannot display the page you are trying to view". The error number is 0x80070002. I go to the knowledge base and delete the content of the Data Store folder as advised, but to no use at all. Active X controls are enabled Java is working fine. I've cleaned the register and everything, did a complete scan with Onecare as advised by Microsoft, which did not find anything but again the same error message. I am using KIS 2009 and I am sure I have no viruses or any other malware. I even tried to go to the update site with the KIS switched off but to no avail too. On the other hand I don't have problems with the automtic updates and when I run a manual update from the Update module everything is OK. Do you have any suggestion as to what might be the issue with the website updates?
P.S. I am using 32-bit Windows Vista Business on a Lenovo W500.

hello
You may be having a problem with the windows update agent.Since its a problem relating to windows update microsoft support personnel may help you out.follow this link and contact them by chat or email
http://support.microsoft.com/common/international.aspx?gprid=6527&acty=Start&ctl=Region&wf=Workflow&...
Cheers and regards,
• » νιנαｿѕαяα∂нι ѕαмανє∂αм ™ « •
●๋•کáŕádhí'ک díáŕý ツ
I am a volunteer here. I don't work for Lenovo

Problem with changing Label in Bridge CS3 and CS6

Hi there,
I am having some problem with changing Label in Bridge CS3 and CS6 in windows.
1. In Bridge CS3 (Windows XP), most of the time with most of the files, there is no problem. But I found that in some files, the Label does not get changed. I usually change Label by right clicking on the picture, then Label and select any Label. When I do so in those files, nothing happens. But when I rename the file by changing or adding just a single character, then it works. And if I again rename to original name, it still works. But without renaming the Label does not change. Again this does not happen with all pictures, but occationally with some. We usually receive pictures from different clients for editing purpose.
2. In Bridge CS6 (Windows 7), if you create lot of Path using Pen tool in Photoshop for the purpose of removing background, you save the file, close, and change Label in Bridge, again open the file in Photoshop, you see no Path in the Path Pallette. So that means, changing Label works, but it removes the Path from the file. But if there is small amount of path, then no prboblem. But if there is lot of path, like you need to create for a necklace to remove background, then the problem arises.
I am using Bridge for a purpose where it is very helpful so I really need to use Bridge, and Labeling feature is the most important to me, but after feaguring out this problem, I am really tensed as to whether or not I will find a solution to this. So any help, guidance will really be appreciated.
Thanks very much in advance for any solution.
Best regards

I have re-checked the issue and I found that the problem is with JPG file.
I wasn't even aware you could save a path to a jpeg file (always use PSD because of wanting to keep the Alpha Channel, jpeg only can contain 1 layer and no alpha channels and/or transparency).
However I tried it on a file with a simple path and one with a complex path. It seems indeed you have found a bug. The simple path is no problem but the more complex path is indeed disappearing.
It is not only label but also rate or adding IPTC in the description field. The moment metadata is saved to this jpeg file and reopened the earlier present work path of a more complex path is gone.
Despite the fact that to my opinion a jpeg is not the most suitable file format for saving a work path this should not happen. If a work path is saved to a jpeg then it should be kept saved after just altering metadata in Bridge.
It still is the same behavior in Bridge CC because that is what I use. Don't know when it started but it still needs to be repaired
Here is the link for filing a problem or bug:
http://feedback.photoshop.com/photoshop_family/

Problems with an external monitor

I have a laptop with intel 945 grafic card and I also use an external monitor (which has a nicer panel).
However I experience some strange problems with my setup:
I usually (when I am at home) start my laptop and close the laptop screen via
xrandr --output LVDS --off
But, after a random period of time (I have not found any good reason for it) my external monitor goes in some sort of power save mode (the screen goes black and remains that way).
I usually activate the other screen (LVDS) and try to see if I can do anything.
when I type:
xrandr -q
Screen 0: minimum 320 x 200, current 1280 x 800, maximum 2048 x 2048
VGA connected (normal left inverted right x axis y axis)
1680x1050 60.0 +
1920x1440 60.0
1856x1392 60.0
1792x1344 60.0
1600x1200 75.0 70.0 65.0 60.0
1400x1050 75.0 72.0 60.0
1280x1024 59.9 60.0
1280x960 74.9 72.0 60.0 59.9
1152x864 75.0 74.8 60.0
1024x768 70.1 60.0
832x624 74.6
800x600 72.2 75.0 60.3 56.2
768x576 75.0 72.0 60.0
640x480 72.8 75.0 72.8 66.7 60.0
720x400 70.1
LVDS connected 1280x800+0+0 (normal left inverted right x axis y axis) 0mm x 0mm
1280x800 60.0*+ 60.0
1280x768 60.0
1152x768 54.8
1024x768 85.0 75.0 70.1 60.0
832x624 74.6
800x600 85.1 72.2 75.0 60.3 56.2
640x480 85.0 72.8 75.0 59.9
720x400 85.0
640x400 85.1
640x350 85.1
No matter what I do I cannot live reactivate the external monitor.
(usually I try with the classic :
xrandr --output VGA --auto
Inittially I thought it is a problem with the driver (i810) so I upgraded yesterday the whole system.
Even after I did that and used the new driver (intel) I still had much luck as I had an other blanking event today.
An other ideea is that this is caused by faulty bios, but it is just a guess
My present day solution: reboot (yes, full reboot, because restarting the xorg has not the intended effect)
Any ideas on what may cause this?
Any help would be appreaciated.
Last edited by tiberiur (2008-05-25 20:57:31)

display goes to sleep when colsed because there is a magnetic switch - small magnet opens the circuit.
if it stays on, either magnet was misplaced, some wire disconnected or the issue is with the switch circuit.
on some models switch is part of trackpad, if you have small magnet, try moving it over trackpad, see what it does.

Strange problem with changing external links site-wide

Similar Messages

Maybe you are looking for