Stroke command not available

I am trying to add an outline to a dialog bubble. I can't figure out how to make the Stroke Command available. It is greyed out. I have tried to select the layer, tried everything. What am I missing? Thanks.
nancy

Another way...
1. Ctrl-click the dialog bubble layer to get the "marching ants".
2. Create a new empty layer beneath the bubble layer and apply the Stroke to this layer.
3. Merge the 2 layers.

Similar Messages

  • Command NOT Available

    I have created a set of actions for watermarking that works great - one image at a time. If I try to batch process...each step comes up "command not available" What am I doing wrong?

    I am taking the following steps. The crazy thing is that it worked perfectly the first time I did an individual file and perfectly the first time I did a batch. Now it will only work on one file at a time. I have been working on this for hours. Hope I am helpable!
    Creating the Action
    1. Create a folder on your desktop and name it Images to Watermark. Place copies of two or three images in the folder.
    2. Create a second folder and name it Watermarked images.
    3. Open one of the photos from the Images to Watermark folder.
    4. Go to the Action Palette (Window > Actions) and select the Default Action Set.
    5. Click the Create New Action at the bottom of the palette.
    6. Give the action the name Watermarking and click Record.
    7. Go to the File Menu and choose Place. When the Place dialog opens, choose the watermark.psd that you saved when you created the watermark. Press Enter and the transparent watermark will be centered in the middle of your image.
    8. Flatten the image.
    9. Save the photo by choosing File > Save As and select JPEG format. Save the watermarked image in the second folder you made named Watermarked Images

  • Previous/Next View commands not available

    I have two PDF documents created from Adobe Acrobat 7.
    Using Adobe READER, in one document I can navigate around jumping through several different pages and zoom levels and then use the right-mouse click to choose "Previous View" or "Next View".
    In the other document these commands are not available and the tool icons are grayed out.
    The only difference I can see between the two documents is that one has Fast Web View enabled and the other doesn't. I went back and resaved trouble document with Fast Web View enabled, but it didn't help after testing it again.
    Any ideas?
    Thanks.

    It depends on which program you used to create PDF too.

  • Parameters from SQL command not available in Web Viewer

    Hello,
    I recently built a report using Crystal Reports 2008, and I'm using it with CR4E 2.0 SP1.  The report has had a SQL command inserted into it, instead of pulling in tables and taking the desired fields.  This was done to speed up rendering time.  The SQL command also has some parameters in it to adjust the date, etc.
    When the report is viewed in CR4E under the web viewer, the parameters are not available to be changed.  They will appear at first for the initial settings, but cannot be changed afterward.  These parameters were set to "Editable" in CR2008.  In fact, other reports will work this way, but those reports don't use SQL commands as a datasource.  Is there another step I haven't completed?
    Thanks so much for your help!
    Edited by: John_AM on Jun 29, 2009 3:31 PM - Added CR4E version.

    Hi John,
    This is NOT a support case management system but a public forum for all to use. If you don't get an answer then you always have the option to purchase a support case and ahve a dedicated Engineer assist you.
    http://store.businessobjects.com/store/bobjamer/DisplayProductByTypePage&parentCategoryID=&categoryID=11522300?resid=-Z5tUwoHAiwAAA8@NLgAAAAS&rests=1254701640551
    Thank you

  • Jar command not available

    Hi,
    I have a new Java programmer and I have installed the following software onto my PC:
    1) Java SE Development Kit 6u1 and NetBeans IDE 5.5.1 Bundle
    2) Sun Java Toolkit 1.0 for CDC
    3) JBuilder 2005 Foundation
    Now, I am trying to make a "jar" file with the following command:
    " jar -cf test.jar *.class "
    And my system reports the following:
    " 'jar' is not recognized as an internal or external command, operable program or batch file. "
    I have Java SDK, and IDE installed in my PC, and yet "jar" is not available. How could this be possible? What happen? Kindly advice, please!
    Regards,
    wee

    jar is an executable in your JDK installation directory that needs to be pointed to or else it will not recognize it.
    You can specify the bin directory of your JDK in your PATH environment variable or simple type an absolute path to jar.exe in the commandline.
    "C:\Program Files\[jdk directory]\bin\jar" -cf test.jar *.class

  • Iphoto keywords commands not available

    All the keywords commands (pane, edit, manage, etc..) are all not available in the iPhoto menus.
    Can someone help me?
    thanks
    lucia

    What version of iPhoto are you using?
    Happy Holidays

  • Error : GCC ( gnu c compiler)make command not available when I install gnuplot-4.4.3 on OS X10.6.8.

    Dear all,
    I hope this is clear
    Goal: To install gnuplot for OS X.
    Problem: gcc make command not found. When I try to install gnuplot 4.4.3 on os X 10.6.8
    System hardware : Mac mini 2010.
    OS : OS X 10.6.8 snow leopard
    Application installed working : TeXshop 2.3.7, AquaTerm v1.0.1 (1.0.1)
    Questions: Any help or advise on how  and where to get the make command ?

    BTW...This is my error message at terminal....shown below
    Last login: Thu Feb 23 09:37:21 on console
    /Users/lim/Desktop/Source_gnuplot4.4.4/gnuplot-4.4.4/configure ; exit;
    lims-mac-mini:~ lim$ /Users/lim/Desktop/Source_gnuplot4.4.4/gnuplot-4.4.4/configure ; exit;
    checking for a BSD-compatible install... /usr/bin/install -c
    checking whether build environment is sane... yes
    checking for a thread-safe mkdir -p... /Users/lim/Desktop/Source_gnuplot4.4.4/gnuplot-4.4.4/install-sh -c -d
    checking for gawk... no
    checking for mawk... no
    checking for nawk... no
    checking for awk... awk
    checking whether make sets $(MAKE)... no
    checking for gcc... no
    checking for cc... no
    checking for cl.exe... no
    configure: error: in `/Users/lim':
    configure: error: no acceptable C compiler found in $PATH
    See `config.log' for more details.
    logout
    [Process completed]

  • Make command not available error

    I want to create an action that will apply a set of color adjustment layers to an existing selection in a group.
    IE. I want to create a group with a selection mask that contains several color type adjustment layers.
    THis is what I did:
    Make a selection.
    Create this action:
         Create Adjustment layer
         Create group using the newly created adjustment layer.
         Select the mask from the adjustment layer and drag it to the group.
    No errors creating the Action
    When I run the action, I get the error "The command 'Make' is not currently available"
    This is the text save of the action
    Action 2
                           Make adjustment layer
              Using: adjustment layer
              Type: hue/saturation
              Preset Kind: Default
              Without Colorize
                             Make Group
                                            From: current layer
                             Make
                                            New: channel
                                            At: mask channel
                                            Using: reveal all
                             Select layer “Hue/Saturation 8”
                                            Without Make Visible
                             Make
                                            New: channel
                                            At: mask channel of layer “Group 8”
                                            Using: mask channel of current layer
    I've done some research on this but haven't found the solution.
    Thanks for your help
    -SteveInEsc

    Crafting Actions Package UPDATED Aug 14, 2012 Changed AspectRatioSelection Plug-in script added Path support.
    Contains
    Action Actions Palette Tips.txt
    Action Creation Guidelines.txt
    Action Dealing with Image Size.txt
    Action Enhanced via Scripted Photoshop Functions.txt
    CraftedActions.atn Sample Action set includes an example Watermarking action
    Sample Actions.txt Photoshop CraftedActions set saved as a text file.
    12 Scripts for actions
    Example
    Download

  • Ip nhrp command not available?

    Hi everyone,
    I'm setting up an 871 and I've configured my tunnel0 interface, however I cannot type in any commands for ip nhrp.
    I currently have:
    interface Tunnel0
    bandwidth 1000
    ip address 10.10.10.20 255.255.255.0
    ip access-group 101 in
    no ip redirects
    no ip unreachables
    no ip proxy-arp
    ip mtu 1400
    ip virtual-reassembly
    ip route-cache flow
    ip tcp adjust-mss 1360
    ip ospf network broadcast
    ip ospf priority 0
    tunnel source FastEthernet4
    tunnel mode gre multipoint
    tunnel key 10000
    tunnel protection ipsec profile SDM_Profile1
    end
    When I type in ip nhrp ? I get an unrecognized command error.
    Is there anything I have to enable prior to having this command available?
    Thanks,
    Ali

    That was pretty much it... after digging around that day, I noticed the IOS on that baby was advsecurity. Upgraded to Advanced IP services and worked like a charm.
    I'm not at all familiar with DMVPNs so that one was a trick to find out.
    Thanks Andrew.

  • Remote app: control command not available

    Hi all,
    I am using Remote app 2.3 on a iPhone 4G and an iPad 1 together with Apple TV 1st gen (software version 3.0.2).
    On the ipad I can see the control cross as an icon to control Apple TV with finger moves.
    Unfortunately on my iPhone, remote only shows the following standard icons in the menu bar: Genius, Lists, Artists, Search and more.
    I can't find any control field.
    Does anyone has an idea why the app is missing the control command in the iPhone's version?
    Kind regards
    Günter

    Hi vazandrew,
    thank you for your tipps.
    I selected Apple TV in the two squares (I have two entries my media library of macbook and my Apple TV).
    In a youtube tutorial I saw that if you control your macbooks media library, no gesture interface is visible. http://www.youtube.com/watch?v=eUzy8jcjvPs&feature=related (min 4:30) If you select your Apple TV, the interface is shown.
    I can imagine that remote app does not recognize Apple TV as a device that can be controled with the gesture interface. What do you think?
    So I tried next the complete homesharing activation on every device.
    Infortunately - even if selected the homesharing option in my macbook and the remote control, the menu for Apple TV stays without the icon of gesture interface.
    So I disconnected my library from Apple TV (which copies the contents of my macbook on the harddisk of Apple TV) and I hoped that only streaming of the media library to the Apple TV could help. But no fortune (even the connection via my wlan router broke very often down, when the macbook streamed to Apple TV).
    It is now still copying the contents again on it - approx. 120 GB - so I will have to wait to try out other things.
    As I said, my iPad 1 works properly with the gesture interface.
    Kind of strange thing... :-)
    Kind regards,
    Günter

  • Command/F1 key command not available

    PS CS4 keeps telling me the OS is using this key command. It isn't. PS CS3 lets me use it and so does AI CS3 and CS4.

    When specifying an alias you must write a name, not a path. Something like this:
    keytool -genkey -alias server ...etc
    The alias sholdn't be a path. Now the alias must be the one you used for your certificate or want to use. When generating a key the most common alias name is root:
    keytool -genkey -alias root ... etc.
    Hope this help you.

  • InDesign CS4 keyboard commands not available when swatch palette in open

    Has anyone else been experiencing this? When I have my swatch palette open in CS4 on Windows XP, I cannot use even the most basic keyboard commands and shortcuts. Once the palette has been closed, keyboard commands return. I've encountered this on more than one computer.
    Any thoughts?
    Diane

    If you're using the KBSC to get to the Swatches panel you may have inadvertently entered the Tint field, in which you can type a number. If you hit Tab in this field you get a thin black line outlinining the panels swatches when see this you can use the arrow keys to navigate the swatches, or use a key to go to the name of swatch, so I could type C and it goes to the first swatch starting with a "C".
    With the Swatches panel open, try hitting Esc and then try your KBSC.

  • Sender receiver assignment - jump command not available

    Hi Experts,
    i want to create a sender receiver assignement between two queries. For several month i already tested the sender receiver assignemnt and it works, so i deleted the dummy. Now i tried to create a new assignment, but after i execute the sender query and make a right-click on a data cell, the appeared popup mirror does not have the entry "jump" or "goto" (i dont know the english name) to select the receiver query (there only appears the entry "properties").
    I maintenanced all necessary settings in the transaction RSBBS, in which i selected the sender query and created a receiver for the sender query.
    Are there any basic System settings, which could have been changed, since i tested it for several month?
    Thanks forward.

    Hi Experts,
    i want to create a sender receiver assignement between two queries. For several month i already tested the sender receiver assignemnt and it works, so i deleted the dummy. Now i tried to create a new assignment, but after i execute the sender query and make a right-click on a data cell, the appeared popup mirror does not have the entry "jump" or "goto" (i dont know the english name) to select the receiver query (there only appears the entry "properties").
    I maintenanced all necessary settings in the transaction RSBBS, in which i selected the sender query and created a receiver for the sender query.
    Are there any basic System settings, which could have been changed, since i tested it for several month?
    Thanks forward.

  • Error: -bash: curl: command not found

    I have successfully installed full ruby (1.8.4) using terminal commands, but for unknown reasons I can no longer access the commands curl, sudo, and many others. Although i had access to these commands a few minutes ago, i can't get any of them to work. I would prefer to figure out what i did to make these commands not available and fix that, but i would also appreciate directions to install the individual opensource files such as "curl-28.0.3" from http://www.opensource.apple.com/darwinsource/10.4.9.x86/. I am a new terminal user, so any and all help is truly appreciated.

    That worked, that you so much!! Apparently I typed the wrong thing more than a few times, which is probably the cause of my problems this is what was in my /.profile:
    export PATH="/usr/local/bin:/usr/local/sbin:$PATH"
    export PATH="/usr/local/bin:/usr/local/sbin:$path"
    export PATH="/usr/local/bin:/usr/local/sbin:$PATH"
    export PATH="/usr/local/ruby/bin:/usr/local/sbin:$PATH"
    export PATH="/usr/local/bin:/usr/local/sbin:$PATH"
    # Your previous .profile (if any) is saved as .profile.mpsaved
    # Setting the path for MacPorts.
    export PATH=/opt/local/bin:/opt/local/sbin:$PATH
    export PATH="/usr/local/bin:usr/local/sbin:$PATH"
    export PATH="/usr/local/ruby/bin:usr/local/sbin:$PATH"
    export PATH="/usr/local/bin:usr/local/sbin:$PATH"
    export PATH="/usr/local/bun:/usr/local/sbin:$PATH"
    export PATH="/usr/local/bin:/usr/local/sbin:$PATH"
    I'm assuming that i need to delete all lines except for:
    export PATH="/usr/local/bin:/usr/local/sbin:$PATH"
    and then save the file, right?

  • Photoshop CS6 error : Could not complete the video flames  to layers command because Dynamiclink is not available

    i can´t import videos and mp3  photoshop cs6 error : Could not complete the video flames  to layers command because Dynamiclink is not available .... what it means? who can i fix it?

    Unfortunatly, the 32 bit versions of windows doesn't support video in photoshop cc.
    see this post:
    http://forums.adobe.com/message/5802978#5802978

Maybe you are looking for